SWISSCUTDECOLINETHE NEW MOTOREX HSC-TECHNOLOGYFOR THE BEST PERFORMANCE

CuZnx

Cu

Al

Ti

Ni

Fe

0 10 20 30 40 50 60 70 80

SWISSCUT DECOLINEHIGHEST PERFORMANCE MOTOREX CUTTING OILSFOR PERFECT SURFACE FINISHES AND ACCURACY

2 I MOTOREX SWISSCUT DECOLINE

FOR BEST PERFORMANCEI Outstanding performanceI Low consumptionI Highly effective corrosion protectionI Highest operational reliability due to high fl ash point and low mistingI Excellent long term process stabilityI Outstanding compatibility for operators and machinesI Top marks in medical technology for easy validationI Highly resistant to ageing I Reduced production costs

FOR MAXIMUM PRODUCTIVITYWith the right product from the SWISSCUT DECOLINE range,cycle times can be signifi cantly reduced and evaporation losses are reduced by up to 60%. Take advantage of this potentialfor optimisation in your company!

Bees are not only industrious, but also intelligent. They combine their abilitiesto perform several tasks simultaneously in a targeted and highly effi cientmanner. Mirroring this principle, MOTOREX uses collective intelligence inthe new SWISSCUT DECOLINE.

Relative evaporation loss in %

I SWISSCUT DECOMED HP-X (GrIII+ base oil) I SWISSCUT DECO AP (GrIII+ base oil)I Standard cutting oil (GrI base oil)

The new SWISSCUT DECOLINE products are free ofchlorine, zinc and other undesirable ingredients. The SWISSCUT DECOLINE products contain high quality baseoils that are combined with state of the art additives.The result is excellent compatibility for workers, materialsand machines. This allows ideal conditions for diffi cult machining of critical aluminium alloys, titanium, stainless, high-alloy steels as well as non-ferrous metals.

Collective intelligenceas a model for success

TURNING

MILLING DRILLING

DEEP-HOLE DRILLING

THREAD CUTTING

REAMING

GEAR CUTTING

PREMIUMQUALITY

ROLLERBURNISHING

0 5 10 15 20

33%

Field of application

I Drilling and threadingI Deep hole drillingI ReamingI Turning and millingI Hobbing

Industries

I AviationI Automotive industryI Medical technology

DECOMED HP-XHIGHEST-PERFORMANCE AND COST-EFFICIENCY

SWISSCUT DECOMED HP-X cutting oils were developed according to the strictest criteria for use in medical technology. This universally applicable high-performance cutting oil is ideal for stainless and high-alloy steels, as well as titanium, non-ferrous metals and aluminium. The HSC technology developedby MOTOREX also enables optimized cutting data for all materials, resultingin shorter cycle times.

5 I MOTOREX SWISSCUT DECOLINE

NO CYTOTOXICEFFECT ACCORDING TO

ISO-10993-5

UP TO 33% MORE PERFORMANCE

Number of pieces

Compare: Processing of medical steel DIN 1.4109

I SWISSCUT DECOMED HP-XI Standard cutting oil

Knee joint implantof cobalt-chromium-molybdenum alloy

Endoscopy componentmade of titanium Grade 5

Hip jointmade of titanium Grade 5

Titanium dental implant

Rotary containerfor laboratory centrifuge made ofstainless steel/aluminium alloy

When using cutting oils for the manufacture of implants in the medical sector, good physiological compatibility is a central point. SWISSCUT DECOMED HP-X is not cytotoxic according to ISO-10993-5, (this rigorous test determines the viability of body cells through the processing medium). Cutting oils are classifi ed as non-cytotoxic if the viability of the body cells is over 70%. SWISSCUT DECOMED HP-X has a very good value of over 80%.

109876543210

Fields of application DECOMED HP-X DECO AP

I Drilling I Depp hole drilling I Turning I Milling I Hobbing I Gear cutting I Roller burnishing

Materials DECOMED HP-X DECO AP

I Sintered metal I Steel I Inox I Titanium I Brass I Beryllium I Nickel silver I Precious metal I Aluminium

suited well suited highly suited

7 I MOTOREX SWISSCUT DECOLINE

Performance

Watch industryDecolletage

Material compatibility

Aviation Evaporation loss

Medicaltechnology

Flash-point

General metalprocessing

Human tolerance

Automotive industry

Compressor wheel of Al 3.1924

Watch plateof Brass

DECO APFOR THE ECONOMICAL MACHINING OF PRECISION PARTS

In watchmaking, a wide variety of materials are processed in many different ways. The new cutting oil SWISSCUT DECO AP was developed especially for these demanding requirements and also considering future watch materials. Highest performance, perfect results, SWISSCUT DECO Line.

NO DISCOLORATION ON NON-FERROUS METALS,MARK 1A-1B ACCORDING TO

ASTM D130

SWISSCUT DECOMED HP-X SWISSCUT DECO AP

INDUSTRIALLINE I A wide range of products

I Spindle oils and coolants SPINDLELINE I Water-miscible cutting fl uids SWISSCOOLI Cutting oils SWISSCUTI Grinding fl uids SWISSGRINDI Forming oils SWISSFORMINGI EDM oils SWISSFINISHI Slideway oils SWISSGLIDEI Anti-corrosion fl uids SWISSPROTECTI Cleaners SWISSCLEANI All-purpose sprays SPRAYLINE

INDUSTRIALLINELIQUID EFFICIENCY WITH MOTOREX!

EXPERIENCE SINCE 1917

MOTOREX AG LANGENTHAL I Industrial Lubrication TechnologyBern-Zürich-Strasse 31, 4901 Langenthal, SwitzerlandTel. +41 62 919 74 74, www.motorex.com