Date post: | 05-Jan-2017 |
Category: |
Documents |
Upload: | vuongquynh |
View: | 213 times |
Download: | 0 times |
M A Y Blasting Equipment
M ed i a
JUNE Masking Products
JULY/AUGUST Degreasers
SEPTEMBER Anodizing Equipment &
Supplies
OCTOBER Ovens
NOVEMBER Zinc & Zinc Alloy Plating
Processes
~ p L m R ~UF~
electrgless nickel directory
research and development and
innovation, Sirius Technology
offers a product line that is both
comprehensive and practical. Each
process is designed for consisten-
cy and easy operation, is field
proven, and yields superior and
un ique depos i t characteristics.
www.sirius-tech.com
UYEMURA USA 1 . e
www.uyemura.com ~*~.o~
UYEMURA INT'L CORP. Corporate Headquarters
Ontario, CA
Ph: (909) 466-5635
(800) 969-4842
Fax: (909) 466-5177
Tech Center
S o u t h i n g t o n , C T 06489
Ph: (860) 793-4011
(800) 243-3564
Fax: (860) 793-4020
E-mail: s a l e s @ u y e m u r a . c o m
ANP electroless nickel technol- ogy improves plating on alu- minum and provides excellent adhesion through six MTOs, brighter finish, wide operating window, and fewer process steps. Strike-free process adds no additional steps compared to normal aluminum prepara- tion double zincating. ANP lead and cadmium-free elec- troless nickel works with pro- prietary cleaning, etching, and zincating technologies.
www.uyemura.com.
Continued from page 66
NEW products blue color is only temporary. The adhesive's blue color becomes the vis- ible indicator that identifies when sufficient light energy has been pro- vided to the adhesive bond area to achieve full cure. As the adhesive cures, the blue color within the adhe- sive fades and ultimately turns clear upon full cure. Representative adhe- sives formulated with See-Cure tech- nology for use in medical device assembly were subjected to biocom- patibility testing. It was verified that the addition of DYMAX See-Cure technology has no effect on the bio- compatibility rating of the original adhesive product or on the biocom- patibility of the component surfaces. Visit www.seeitcure.com for details.
.Circle 412 on reader service card
SWITCHMODE POWER SUPPLY Dynapower is pleased to announce the expansion of its water-cooled, high-efficiency Switchmode Power Supply product line. Standard ratings are now available in 1,000-, 2,000-, 2,500-, 5,000-, and 10,000-A units configured as wall, rack, or floor- mounted, with less than 1% AC RMS of full-scale output ripple. Each unit is equipped with Dynapower's exclu- sive touchpad controller with digital meters, ramp, cycle timer, pulsing, Ampere-hour, program generation, and analog and digital I/O commu- nication interface. Also available is the company's latest generation of fully sealed, high-frequency switchmode DC power supplies. According to Dynapower, switchmodes are highly efficient and feature a NEMA 4X stainless steel compact enclosure. For more information on other offer- ings, please visit www.dynapower.com.
Circle 413 on reader service card
March 2008 1 metalf inishing I 68 www.meta[finishing.com