The NOVATEK STRONG security system is implemented with frame panels and posts section of 50x50 mm.; the coupling is done by “passing through” screws. The system is mainly used by those who have to delimit hazardous areas and must ensure a high level of impact resistance. Also the section of the upright 50x50 gives a greater guarantee of strength
from the visual point of view.
SystemNovatek strong
Protections and modular safety systems EN 2020
The Novatek panel has a welded mesh inside the profile that gives it a greater elegance and rigidity.
Solid
Each component has been studied to be ableto be modular, in fact the same panelsact both as fixed elements and by using our kits, they transform into hinged or sliding doors.
Modular
The innovative system of the 32x67 mm. and Ø3 mm. wire combined with the black color of the panel improves the visibility of the machinery inside the protected area.
Visibility
www.protec-italy.netPROTEC SrlVia Zamenhof, 363 36100 VICENZA - ITALY Tel. +39 0444 246080 Fax +39 0444 [email protected]
Net 32x67 mm wire Ø3 mmground clearance 100 mm
H H H
100
180
40x40 100
180
150
7070
150
H
Base
1500
950
950
150019
00
1500
2560 29
60 3110
100
100
1500
1900
3510
100
1900
1900
3910
253
22 10
32
28
100
100
7070
40x80 80x80
H H H
100
180
40x40 100
180
150
7070
150
H
Base
1500
950
950
150019
00
1500
2560 29
60 3110
100
100
1500
1900
3510
100
1900
1900
3910
253
22 10
32
28
100
100
7070
40x80 80x80
H H
100
180100
180
40x40Base 38
8777
784
313
3
1840
8777
784
357
5
Base 38
2368
86
Techno Ø3
H
100
180
Base 38
8777
784
313
3
1840
8777
784
357
5
Base 38
2369
87
Techno Ø4
Techno Ø3 inox
Techno Ø4 inox
H H
100
180100
180
H H H
100
180100
180
150150
50x50 40x40 40x80 80x80
40x80 40x40 40x80
Panelsdimensions
System Novatek strong
Post dimensions
UprightThe upright is a fundamental element to ensure high impact resistance, in fact the50x50 upright is made with welded plate and allows greater resistance compared totraditional upright with section 40x40.
Installation is much faster than traditional systems with feet, the position of the holes, allows fixing the upright to the floor without moving it from the desired position.
Panels dimensions Uprights dimensions
Item N° Base Height Color
PNNA001 250
950
PNNA002 400PNNA003 700PNNA004 1000PNNA005 1200PNNA006 1500
PNNA007 250
1500
PNNA008 400PNNA009 700PNNA010 1000PNNA011 1200PNNA012 1500
PNNA013 250
1900
PNNA014 400PNNA015 700PNNA016 1000PNNA017 1200PNNA018 1500
Item N° Height Section Plate Color
MT300 2000 50x50 100x180MT604 2560 50x50 100x180MT605 2960 50x50 100x180MT606 3110 50x50 100x180MT607 3500 50x50 100x180
KRMT001KA102ZN
Leveling kit for 50x50 uprightsLevel plate dim.100x180 sp. 25/10
Colors on request for panels and
posts