+ All Categories
Home > Documents > System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones...

System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones...

Date post: 19-Sep-2020
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
34
¡Please read these instructions carefully before using this product and keep this manual for future reference. ¡Prière de lire attentivement ces instructions avant d’utiliser ce produit et conserver ce manuel d’utilisation pour s’y référer ultérieurement. ¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia futura. System Upgrade Guidebook Guide pratique de mise à niveau de système Guía de mejora del sistema Model: CQ-VX100U
Transcript
Page 1: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

¡Please read these instructions carefully before using this product and keep this manual for future reference.¡Prière de lire attentivement ces instructions avant d’utiliser ce produit et conserver ce manuel d’utilisation pour s’y référer ultérieurement.¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia futura.

System Upgrade GuidebookGuide pratique de mise à niveau de système

Guía de mejora del sistema

Model: CQ-VX100U

Page 2: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

1

2 CQ-VX100U

Engl

ish

Safety Information

Warning

Observe the following warnings when usingthis unit.❑ The driver should neither watch the display nor

operate the system while driving.Watching the display or operating the system will distractthe driver from looking ahead of the vehicle and can causeaccidents. Always stop the vehicle in a safe location anduse the parking brake before watching the display or oper-ating the system.

❑ Use the proper power supply.This product is designed for operation with a negativegrounded 12 V DC battery system. Never operate thisproduct with other battery systems, especially a 24 V DCbattery system.

❑ Protect the Deck Mechanism.Do not insert any foreign objects into the slot of this unit.

❑ Do not disassemble or modify the unit.Do not disassemble, modify the unit or attempt to repairthe product yourself. If the product needs to be repaired,consult your dealer or an authorized PanasonicServicenter.

❑ Do not use the unit when it is out of order.If the unit is out of order (no power, no sound) or in anabnormal state (has foreign objects in it, is exposed towater, is smoking, or smells), turn it off immediately andconsult your dealer.

❑ Refer fuse replacement to qualified service per-sonnel.When the fuse blows out, eliminate the cause and have itreplaced with the fuse prescribed for this unit by a qualifiedservice engineer. Incorrect replacement of the fuse maylead to smoke, fire, and damage to the product.

Observe the following warnings wheninstalling.❑ Disconnect the lead from the negative (–) battery

terminal before installation.Wiring and installation with the negative (–) battery termi-nal connected may cause electrical shock and injury due toa short circuit.Some cars equipped with the electrical safety system havespecific procedures of battery terminal disconnection.FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TOTHE UNINTENDED ACTIVATION OF THE ELECTRICALSAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHI-CLE AND PERSONAL INJURY OR DEATH.

❑ Never use safety-related components for installa-tion, grounding, and other such functions.Do not use safety-related vehicle components (fuel tank,brake, suspension, steering wheel, pedals, airbag, etc.) forwiring or fixing the product or its accessories.

❑ Installing the product on the air bag cover or in alocation where it interferes with airbag operationis prohibited.

❑ Check for piping, gasoline tank, electric wiring,and other items before installing the product.If you need to open a hole in the vehicle chassis to attachor wire the product, first check where the wire harness,gasoline tank, and electric wiring are located. Then openthe hole from outside if possible.

❑ Never install the product in a location where it inter-feres with your field of vision.

❑ Never have the power cord branched to supplyother equipment with power.

❑ After installation and wiring, you should check thenormal operation of other electrical equipment.The continuation of their using in abnormal conditions maycause fire, electrical shock or a traffic accident.

❑ In the case of installation to an airbag equippedcar, confirm warnings and cautions of the vehiclemanufacturer before installation.

❑ Make sure the leads do not interfere with drivingor getting in and out of the vehicle.

❑ Insulate all exposed wires to prevent short circuit-ing.

This pictograph intends to alert you to the pres-ence of important operating instructions andinstallation instructions. Failure to heed theinstructions may result in severe injury ordeath.

■ Read the operating instructions for the unit and all othercomponents of your car audio system carefully before usingthe system. They contain instructions about how to use thesystem in a safe and effective manner. Panasonic assumesno responsibility for any problems resulting from failure toobserve the instructions given in this manual.

■ This manual uses pictographs to show you how to use theproduct safely and to alert you to potential dangers resultingfrom improper connections and operations. The meanings ofthe pictographs are explained below. It is important that youfully understand the meanings of the pictographs in order touse this manual and the system properly.

Warning

This pictograph intends to alert you to the pres-ence of important operating instructions andinstallation instructions. Failure to heed theinstructions may result in injury or material dam-age.

Caution

Page 3: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

2

3CQ-VX100U

Engl

ish

Caution

Observe the following cautions when usingthis unit.❑ Keep the sound volume at an appropriate level.

Keep the volume level low enough to be aware of road andtraffic conditions while driving.

❑ Do not insert or allow your hand or fingers to becaught in the unit.To prevent injury, do not get your hand or fingers caught inmoving parts or in the disc slot. Especially watch out forinfants.

❑ This unit is designed for use exclusively in auto-mobiles.

❑ Do not operate the unit for a prolonged period withthe engine turned off.Operating the audio system for a long period of time withthe engine turned off will drain the battery.

❑ Do not expose the unit to direct sunlight or exces-sive heat.Otherwise these will raise the interior temperature of theunit, and it may lead to smoke, fire, or other damage to theunit.

❑ Do not use the product where it will be exposed towater, moisture, or dust.Exposure of the unit to water, moisture, or dust may leadto smoke, fire, or other damage to the unit. Make especiallysure that the unit does not get wet in car washes or onrainy days.

❑ Set the volume level to low enough before the AUXconnection is completed.Failure to observe this, the loud noise may come out anddamage your speakers and your hearing. Direct connectionof the speaker/headphone output of an external devicewithout any attenuator may distort sound or damage theconnected external device.

Observe the following cautions wheninstalling.❑ Refer wiring and installation to qualified service

personnel.Installation of this unit requires special skills and experi-ence. For maximum safety, have it installed by your dealer.Panasonic is not liable for any problems resulting fromyour own installation of the unit.

❑ Follow the instructions to install and wire the prod-uct.Not following the instructions to properly install and wirethe product could cause an accident or fire.

❑ Take care not to damage the leads.When wiring, take care not to damage the leads. Preventthem from getting caught in the vehicle chassis, screws,and moving parts such as seat rails. Do not scratch, pull,bend or twist the leads. Do not run them near heat sourcesor place heavy objects on them. If leads must be run oversharp metal edges, protect the leads by winding them withvinyl tape or similar protection.

❑ Use the designated parts and tools for installation.Use the supplied or designated parts and appropriate toolsto install the product. The use of parts other than thosesupplied or designated may result in internal damage to theunit. Faulty installation may lead to an accident, a malfunc-tion or fire.

❑ Do not block the air vent or the cooling plate of theunit.Blocking these parts will cause the interior of the unit tooverheat and will result in fire or other damage.

❑ Do not install the product where it is exposed tostrong vibrations or is unstable.Avoid slanted or strongly curved surfaces for installation. Ifthe installation is not stable, the unit may fall down whiledriving and this can lead to an accident or injury.

❑ Installation AngleThe product should be installed in a horizontal positionwith the front end up at a convenient angle, but not morethan 30˚.The user should bear in mind that in some areas there maybe restrictions on how and where this unit must beinstalled. Consult your dealer for further details.

❑ Wear gloves for safety. Make sure that wiring iscompleted before installation.

❑ To prevent damage to the unit, do not connect thepower connector until the whole wiring is complet-ed.

❑ Do not connect more than one speaker to one setof speaker leads. (except for connecting to atweeter)

CAUTION:

• PLEASE FOLLOW THE LAWS AND REGULATIONS OF YOUR STATE, PROVINCE OR COUNTRY FOR WIRING,INSTALLATION, AND USE OF THIS UNIT AND THE DEVICES TO BE CONNECTED.

Page 4: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

3

4 CQ-VX100U

Engl

ish

Before Reading These Instructions

This is a guide book specific to system upgrading. Please refer to the operating instructions for basic operations,menu operations, specifications, etc.

Panasonic welcomes you to our constantly growing family of electronic products owners.We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefullyselected components, and assembled by people who are proud of the reputation their work has built for our company.We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliabilitywe have built into it, you too will be proud to be a member of our family.

System upgrade sample

Main UnitCQ-VX100U

Expansion Module(CY-EM100U, option)

Hands Free Kit with AudioStreaming featuringBluetooth® technology(Bluetooth unit: CY-BT200U,option)

XM Satellite Radio receiver(XMD1000, option)

CD Changer(CX-DP880, option)DVD Changer(CX-DH801U, option)

TV Tuner(CY-TUN153U, option)

Sirius Satellite Radio receiver (SC-C1, option)

Headrest Monitor(CY-V7100U, option)

iPod®

Page 5: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

4

5

Engl

ish

CQ-VX100U

Connectable devices■ DVD ChangerThe optional adapter (Conversion Cable for DVD/CD Changer: CA-CC30U) allows you to connect the optional Panasonic DVDchanger unit (CX-DH801U). For details, refer to the operatinginstructions for the DVD changer unit.

■ CD ChangerThe optional adapter (Conversion Cable for DVD/CD Changer: CA-CC30U) allows you to connect the optional Panasonic CD changerunit (CX-DP880). For details, refer to the operating instructions forthe CD changer unit.

■ TV tunerYou can connect the optional Panasonic TV tuner unit (CY-TUN153U). For details, refer to the operating instructions for theTV tuner unit.Note:¡CY-TUN153U is an analog TV-specific tuner. ¡If the analog broadcast system is replaced with the digital

broadcast system in a country or area where CY-TUN153U isused, TV broadcasts cannot be received.

¡Inquire about the termination of analog broadcasting to theauthorities concerned in the country or area where CY-TUN153U is used.

■ iPod®

The optional adapter (Direct Cable for iPod: CA-DC300U or DirectCable for iPod with Video: CA-VDC300U) allows you to connect theoptional iPod series.The iPod equipped with a dock connector is exclusively con-nectable. Further information about the controllable iPod isdescribed below.

Controllable iPod/software version¡ 4th generation iPod/ver. 3.1.1¡ 5th generation iPod/ver. 1.2.1¡ iPod photo/ver. 1.2.1¡ iPod mini/ver. 1.4.1¡ 1st generation iPod nano/ver. 1.3.1¡ 2nd generation iPod nano/ver. 1.1.3* Operation check has been completed with software available

at the end of September, 2007. We do not guarantee theoperation with our future products or upgraded software.

iPod is a trademark of Apple Inc., registered in the U.S.A. andother countries.

■ XM Satellite Radio ¡ You can connect the optional XM receiver (XMD1000*) with

optional Digital Adaptor Cable (XMDPAN110*).¡ You can connect the optional XM Direct2 (CNP2000UC*) with

optional Connection Cable (CNPPAN1*).* These products are made by other media companies.

(Not Panasonic products.)For details, refer to the operating instructions for the XMreceiver.

¡Toll free numberXM Tuner P/N: XMD1000/XM Direct2

Call 1-800-XM-RADIO (96-72346)Extension cord P/N: XMDPAN110/CNPPAN1Call 1-800-942-TERK (8375)

¡Use the Panasonic-specific connecting cord (DigitalAdaptor). Please feel free to contact us at the above phonenumber or your dealer if you have any question.

About XMThe direct satellite-to-receiver broadcasting technology is used toprovide listeners with crystal clear sound smoothly from coast to coast.XM is over 130 channels of sheer variety: digital-quality music, news,sports, comedy, traffic & weather, talk, children’s programs, and more.The XM name and related logos are trademarks of XM SatelliteRadio Inc.

■ Sirius Satellite RadioYou can connect the optional Sirius Satellite Radio receiver (SC-C1) with optional Interface Adaptor (CA-LSR01U).For details, refer to the operating instructions for the SiriusSatellite Radio receiver.Note:¡The optional Sirius Satellite Radio receiver SIR-PAN1/the

optional Interface Adaptor CA-PANSC1U cannot be used withthis unit.

Sirius Satellite Broadcast serviceSirius Satellite coverage is only available in the United States(except Hawaii and Alaska) and a part of Canada. The instructionof Satellite Operation Controls in the Operating Instructions andGuide will not be applied.

■ Hands Free Kit with Audio Streamingfeaturing Bluetooth® technology(Bluetooth unit)

The Bluetooth unit (CY-BT200U) is connectable. This feature allowsusers to use a hands-free phone and Bluetooth audio systems.Note:¡CY-BT100U is not supported.

Bluetooth®

The Bluetooth word mark and logo are owned by theBluetooth SIG, Inc. and any use of such marks by MatsushitaElectric Industrial Co.,Ltd. is under license. Other trademarksand trade name are those of their respective owners.

■ Expansion Module (hub unit)You can connect the optional Expansion Module (hub unit) (CY-EM100U). Connection of the Expansion Module allows you tosimultaneously connect optional devices mentioned before as wellas other AV devices. For details, refer to the operating instructionsfor the Expansion Module.Connectable devices ¡ CD/DVD changer (max. 1)¡ iPod (max. 1)¡ XM Satellite Radio (max. 1)¡ Sirius Satellite Radio (max. 1)¡ Hands Free Kit with Audio Streaming featuring Bluetooth®

technology (Bluetooth unit) (max. 1)¡ TV tuner (max. 1)

Note:¡Market conditions regarding optional devices vary with countries

and regions. For further information, consult your dealer.¡If a non-Panasonic product is connected to this unit, we do not

guarantee the operations of the product.

Page 6: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

5

6 CQ-VX100U

Engl

ish

System upgrade sample

XMD 1000

L/C 1144XXXXXX XM RADIO ID : XXXXXXXX

Expansion Module(CY-EM100U, option)

CD Changer(CX-DP880, option)DVD Changer(CX-DH801U, option)

Conversion Cable for DVD/CD Changer(CA-CC30U, option)System-up Connector

Direct cable for iPod with video(CA-VDC300U, option)

orDirect cable for iPod(CA-DC300U, option)

Hands Free Kit with AudioStreaming featuring Bluetooth®

technology(Bluetooth unit: CY-BT200U, option)

¡ You can connect the optional XMreceiver (XMD1000*) with optionalDigital Adaptor Cable (XMDPAN110*).

¡ You can connect the optional XMDirect2 (CNP2000UC*) with optionalConnection Cable (CNPPAN1*).

¡ You can connect the optional SiriusSatellite Radio receiver (SC-C1) withoptional Interface Adaptor (CA-LSR01U).

XM Satellite Radio Receiver(XMD1000*or CNP2000UC*)

iPod

Cellular Phone

Only 1 unit

Up to 4 units CY-BT100UCY-BT100U

Note:¡ Refer to individual instruction and instal-

lation manuals for each device fordetailed installation and wiring.

¡ Market conditions regarding optinaldevices vary with countries and regions.For further information, consult yourdealer.

*These products are made by other mediacompanies. (Not Panasonic products.)

CQ-VX100U

Sirius Satellite Radio Receiver(SC-C1)

TV Tuner(CY-TUN153U, option)

■ Simultaneous Multi-Device Connection

Before Reading These Instructions (continued)

Page 7: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

6

7

Engl

ish

CQ-VX100U

CommonSafety Information................................................2Before Reading These Instructions....................4Touch Panel Operation Overview.......................8

Each SourceTV Tuner Control................................................10CD Changer Control...........................................12DVD Changer Control ........................................13Ext. In ..................................................................14Sirius Satellite Radio Control............................15XM Satellite Radio Control ................................18Bluetooth unit Control (Audio) ........................20Bluetooth unit Control (Hands-free phone) ....22iPod Control........................................................26

SettingsSettings...............................................................28

As neededTroubleshooting.................................................30

Contents

Page 8: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

7

8 CQ-VX100U

Touch Panel Operation OverviewEn

glis

h

The State of Operation Screen

❒ Notes on the Touch PanelBefore operation¡Clean the surface of the touch panel. (a Operating

Instructions)Operation¡Use only your fingers to operate the touch panel.¡Do not press the panel forcefully.¡Do not scratch the panel with fingernails or any

hard objects.

¡Do not use a pen or other sharp implements tooperate the touch panel.

¡Do not bump the front panel.a Failure to observe the above may damage or

break the glass on the surface of the touchpanel.

Displays the Source Selection Screen.

Example: iPod Video

Note:¡The following picture is partly darkened for explanation.¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.

Source Selection Screen appears.Touch desired source button.Touch to quit.

Source Selection Screen

Press [SOURCE] to change todesired mode.

Prohibition Input is not possiblebecause the user hasattempted to performan operation which isnot supported by thedisc contents.

Screen Button(a OperatingInstructions)(only for video source)

Source Button Setup Button(Content varies with each source)

Sound Button (a Operating Instructions)

Aspect Button(a OperatingInstructions) (only for video source)

Clock time(a OperatingInstructions)

Disc indicator (a OperatingInstructions)(Lights when a disc is loaded)

When the expansionmodule (CY-EM100U,option) is used

When one source is con-nected

Displays the Setup Screen.

Setup Screen

Setup Screen appears. Select desired setting.Setup menu, (a page 28, Operating Instructions)

Press [SETUP] to let Setup Screen appear.

Page 9: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

8

9

Engl

ish

CQ-VX100U

Switching the DisplayNote:¡Refer to the instructions of each source.¡To switch Operation Screen on, touch the center of touch panel. (Touch to cancel)¡If no operation takes place for more than 10 seconds when Operation Screen is ON, Operation Screen is turned off.

Audio Source

Video Source

Touch .

Touch .

❒ XM Satellite Radio

Operation Screen1 Operation Screen 2

Touch .

Touch .

❒ Sirius Satellite Radio

Operation Screen1 Operation Screen 2

Touch .

Touch .

❒ iPod Audio

Operation Screen List Screen

Touch .

Touch .

❒ iPod Video

Operation Screen List Screen

Page 10: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

9

10 CQ-VX100U

TV Tuner ControlEn

glis

h

TILTCQ-VD5005W

DIMMER DIM

TUNE/TRACK

MUTE SETUP SOURCE

POWERVOLPUSH SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXTCQ-VX100U

SOURCE

Preparation:¡Connect a TV tuner (CY-TUN153U, option) to the

unit.¡It is required to install the TV antenna to receive TV

broadcasts.

¡For receiving TV broadcasts, stop your car wherethere is no obstacle to broadcast reception around.

Operations

Channel Selection

Channel Seeking

Displaying TV Menu

Tuning

…… Touch/Press and hold

–Selecting an Item onthe TV Menu

Band Selection

TV 1 TV 2

Calls up the menu of the tuner.To cancel, touch again.

Left/right

Up/down

Up

Down

Up

Down

To switch Operation Screen ON, touch the center oftouch panel.

Channel selection/Channel seeking

TV menu

Preset channelselection

q Touch “Source Button”.d

w Touch (TV) on theSource SelectionScreen.

(Content varies withconnected devices)

Source Selection

Press [SOURCE] to change to the desiredmode.

[d]

[s]

[d]

[s]

[SOURCE]

[s] [d]

Note:¡CY-TUN153U is an analog TV-specific tuner. ¡If the analog broadcast system is replaced with the dig-

ital broadcast system in a country or area where CY-TUN153U is used, TV broadcasts cannot be received.

¡Inquire about the termination of analog broadcasting to

the authorities concerned in the country or area whereCY-TUN153U is used.

¡For the operations of the TV tuner with its remote con-trol, aim the remote control at the remote control sen-sor of this unit.

¡The remote control of the TV tuner (CY-TUN153U,option) cannot turn on or off the power of the TV tuner.

Band selection

Source Button

DVD VTR

RADIO CH-C

END

Page 11: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

10

11CQ-VX100U

Engl

ish

Select a band.

Select a channel that you want to exchange.

…… Touch and hold for more than 2 seconds

¡Exit from the preset writing.–

Operations

DVD VTR

RADIO CH-C

END

Preset Memory

Auto Preset Memory

Select a band and a channel.

Favorite preset channelscan be written after youhave set the preset chan-nel once.

Favorite preset channelscan be deleted after youhave set the preset chan-nel once.

Writing Preset Memory

Determine.

¡Touch and hold for more than 2 seconds.¡ “–” appears if the number of receivable channels is less than 12.New channels overwrite existing saved channels.

12 channels with first to 12th highest in signal strength will be preset to each band.

¡Preset channel writing modedisplay appears.

d

d

Select a preset number that you want todelete.

Select a band and a channel.Deleting PresetMemory

Determine.

¡Preset channel deleting modedisplay appears.

d

d

¡Exit from the preset channel deletion.–

–Preset Channel Calling Down

Up

Page 12: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

11

12 CQ-VX100U

Engl

ish

CD Changer Control

…… Touch/Press and hold * Touch panel symbols will change to indicate these current mode. , ,

Track Selection

DVD VTR

RADIO CH-C

END

Disc Selection

[d]

[s]

Next discPrevious disc

Fast Forward/Fast Reverse

Repeat Play

Repeat Play within thecurrent Disc

Scan Play

Random Play

Random Play within theCurrent Disc

–To cancel, touch and hold for more than 2 sec-onds again.

To cancel, touch again.

To cancel, touch and hold for more than 2 sec-onds again.

To cancel, touch again.

To cancel, touch again.

Disc Scan Play–

The first 10 seconds of the all the discs is played.To cancel, touch and hold for more than 2 sec-onds again.

Next trackBeginning of the current trackPrevious track (Touch/press twice.)Fast forwardRelease to resume playback.Fast reverseRelease to resume playback.

¡CD changer functions are designed for optionalPanasonic CD changer unit. (CX-DP880)

Preparation:¡Connect the CD changer, and load a magazine (discs).

q Touch “Source Button”.

dw Touch (CH-C)

on the SourceSelection Screen.

(Content varies with con-nected devices)

CD Changer Mode Selection

Press [SOURCE] to change to the desiredmode.

To switch Operation Screen ON, touch the center oftouch panel.

*

*

*

[d]

[s]

Operations

TILTCQ-VD5005W

DIMMER DIM

TUNE/TRACK

MUTE SETUP SOURCE

POWERVOLPUSH SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXTCQ-VX100U

SOURCE

[SOURCE]

[s] [d]

Source ButtonDisc number

Current track number

Total tracknumber

Total time

Disc selection

Random PlayScan PlayRepeat Play

Track selection

Basic Operations

Page 13: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

12

13CQ-VX100U

Engl

ish

DVD Changer Control

…… Touch/Press and hold

Operations

Operations

DVD VTR

RADIO CH-C

END

MP3MP3MP3CDCDCD

VCDVCDVCDDVDDVDDVD

CompatibleDiscs

CompatibleDiscs

CompatibleDiscs

Disques compatibles

CompatibleDiscs

CompatibleDiscs

CompatibleDiscs

Discos compatibles

CompatibleDiscs

DVDDVDDVD

Track/file Selection

Fast Forward/Fast Reverse

Note:¡When playing a DVD, there are cases where it is not possible to return to

the start of a chapter that spans 2 titles. (a Operating Instructions)

MP3MP3MP3CDCDCD

VCDVCDVCDDVDDVDDVD

The speed changes if the button is held down as follows.Regular speed / 2 times / 5 times / 10 times / 30 times

Folder SelectionMP3MP3MP3

StopMP3MP3MP3CDCDCD

VCDVCDVCDDVDDVDDVDTo resume playback, touch .

PauseMP3MP3MP3CDCDCD

VCDVCDVCDDVDDVDDVDTo resume playback, touch .

Next track/file

Beginning of the current track/filePrevious track/file (Touch/press twice.)

Fast forwardRelease to resume playback.Fast reverseRelease to resume playback.

Next folder

Previous folder

Disc SelectionMP3MP3MP3CDCDCD

VCDVCDVCDDVDDVDDVD Next discPrevious disc

––

Slow Playback VCDVCDVCDDVDDVDDVD¡Touch/press and hold in the pause mode.Playback is at about 1/4 normal speed.To resume normal playback, touch .

Basic Operations

¡DVD changer functions are designed for optionalPanasonic DVD changer unit. (CX-DH801U)

Preparation:¡Connect the DVD changer, and load a magazine (discs).

To switch Operation Screen ON, touch the center oftouch panel.Note:¡Refer to the operating instructions and installation

instructions of CX-DH801U as well.

q Touch “Source Button”.d

w Touch (CH-C) on theSource SelectionScreen.

(Content varies withconnected devices)

DVD Changer Mode Selection

Press [SOURCE] to change to the desiredmode.

[d][s]

TILTCQ-VD5005W

DIMMER DIM

TUNE/TRACK

MUTE SETUP SOURCE

POWERVOLPUSH SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXTCQ-VX100U

SOURCE

[SOURCE]

[s] [d]

Disc/folderselection

OperationButtons

Source Button

[d]

[s]

[d]

Note:¡Reverse slow playback is not possible.

Page 14: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

13

14 CQ-VX100U

Engl

ish

Ext. InPreparation:¡Connect an optional external device to the Ext. In.

q Touch “Source Button”.

dw Touch

(Ext. In) on theSource SelectionScreen.

(Content varies withconnected devices)

Source Selection

Press [SOURCE] to change to the desiredmode.

To switch Operation Screen ON, touch the center oftouch panel.

TILTCQ-VD5005W

DIMMER DIM

TUNE/TRACK

MUTE SETUP SOURCE

POWERVOLPUSH SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXTCQ-VX100U

SOURCE

[SOURCE]

You can view the images and listen to the sounds fromthe connected external devices in the Ext. In moderespectively.

Note:¡You can set up the system so that the Ext. In mode is

not selected (source skip). ( a page 28)¡If no operation is performed for 10 seconds or is

touched, the operation buttons disappear.

Input

Source Button

Page 15: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

14

15CQ-VX100U

Engl

ish

What is SIRIUS Satellite Radio?Over 120 channels of the best entertainmentand completely commercial-free music foryour car, home or office.Only SIRIUS has more than 65 original music channels,from today’s hits to R&B oldies to classical master-pieces. From authentic Country and real Bluegrass tocool Jazz, hot Latin, Reggae, Rock and many more. Bestof all, it’s all completely commercial-free.

SIRIUS also has more than 55 channels of world-classsports, news and entertainment. Included as part of yoursubscription, you get up to 16 NFL games a week, up to40 NBA games a week and up to 40 NHL games a week.(Games are broadcasted during their respective sea-sons.)Coupled with great sports news from ESPN, the SIRIUSsports offering is unrivaled. And don’t forget a host ofother great news and entertainment, like NPR, CNBC, FoxNews, Radio Disney and E!Entertainment Radio.

With SIRIUS, the emphasis is on the music and enter-tainment you want. The music is hosted by SIRIUSJockeys, who are true experts. They back-up the musicwith compelling information about the song beingplayed, and they understand that sometimes it’s best tojust let the music speak for itself.

Rely on SIRIUS rocket science for superiorcoverage.Only SIRIUS has three powerful satellites that fly directlyover the U.S. ensuring coast-to-coast coverage with highelevation angles. This gives the satellites a “clear line ofsight” to your car or home, with much less concern forbuildings, trees or other objects that might block conven-tional satellite signals.

Once you experience more than 120 channels of digitalentertainment, you’ll never want to leave your car. Formore information, visit www.sirius.com.

Connecting Sirius Receiver Getting StartedIt is required to sign up to become a Sirius Satellite Radiosubscriber. After checking your Sirius Satellite Radio ID,sign up on the Sirius’s website or by calling them.

q Check of Sirius Satellite Radio ID¡ To show the ID on the display, tune your Sirius Radio

to channel 0. (Refer to “Channel Selection” on nextpage.)

w Activate the Sirius Satellite Radio. Select either of thebelow to sign up.

¡Web site: http://home.sirius.com/webCUWI¡ Phone number: 1-888-539-SIRIUS (7474)

Connect the optional Sirius Satellite Radio receiver (SC-C1) with optional Interface Adaptor (CA-LSR01U).

Note:¡The optional Sirius Satellite Radio receiver SIR-PAN1/

the optional Interface Adaptor CA-PANSC1U cannot beused with this unit.

¡It is required to sign up to become a Sirius SatelliteRadio subscriber. After checking your Sirius SatelliteRadio ID, sign up on the Sirius’s website or by callingthem.

Sirius Satellite Radio Control

Sirius SatelliteRadio ID

Page 16: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

15

16 CQ-VX100U

Engl

ish

Sirius Satellite Radio Control (continued)

Operations

DVD VTR

RADIO CH-C

END

Band Selection

Category SelectionDisplay*1

Channel Selection

Direct ChannelSelection

SR 1 SR 2 SR 3

Note:¡ The direct channel selection is canceled under the

following circumstances.¡A nonexistent channel is selected.¡ is pressed and no operation is per-

formed for 8 seconds.¡For retrying selection during number entry, touch

.

Setup is the same as from MENU. (a page 28)

Toggles category ON/OFF.

up

down

d

d

to

Note:¡ Refer to “Settings” for how to lock specified channels

(Parental Channel Lock). (a page 28)

Tuning

q Touch “Source Button”.

dw Touch

(SIRIUS) on theSource SelectionScreen.

(Content varies withconnected devices)

Sirius Satellite Radio Mode Selection

Press [SOURCE] to change to the desiredmode.

[d][s]

TILTCQ-VD5005W

DIMMER DIM

TUNE/TRACK

MUTE SETUP SOURCE

POWERVOLPUSH SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXTCQ-VX100U

SOURCE

Band selection

Indicates thesatellite tuner isready.

Channel information(text display)Channel

Categoryselection (*1)

Preset memory

CategoryIndicator

Channel selection

Source Button

[SOURCE]

[s] [d]

To switch Operation Screen ON, touch the center oftouch panel.

Page 17: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

16

17CQ-VX100U

Engl

ish

Preset Memory

Preset Channel Calling

Up to 6 channels aresaved in the preset memo-ry.

The channel blinks once, and a receiving station issaved in the memory.

Preset Memory

to

to

Select a band.

¡Touch desired preset but-ton.

¡Touch and hold for more than 2 seconds.

Select a band and channel.

…… Touch/Press and hold

Note:¡ Because preset memory setting is performed with

service IDs in each channel, a channel may switch toanother that has been stored under the same serviceID when calling up a preset channel. However, broad-casting contents are the same as what the storedchannel provides.

up

down

Category Selection

Switching the TextDisplay

Touch/press once to display the category name, then touch/press again. Seeking willstart.

Useful Function

Text display switches between 2 types asshown.

ch name (channel name)name title

categorych name (channel name)

Show the category selection button first. *1

Page 18: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

17

18 CQ-VX100U

Engl

ish

XM Satellite Radio Control

Getting StartedIt is required to sign up to become an XM Satellite Radiosubscriber. After checking your XM Satellite Radio ID,sign up on the XM’s website or by calling them.

q Check of XM Satellite Radio ID¡ Write down the ID indicated on the lower right of your

XM receiver (XMD1000)/XM Direct2 (CNP2000UC).¡ Check the ID shown by tuning your XM Radio to

channel 0.

w Activate the XM Satellite Radio. Select either of thebelow to sign up.

¡ Web site: http://www.xmradio.com/activation¡ Phone number: 1-800-852-9696

XM Satellite Radio ¡ You can connect the optional XM receiver (XMD1000*)

with optional Digital Adaptor Cable (XMDPAN110*).¡ You can connect the optional XM Direct2 (CNP2000UC*)

with optional Connection Cable (CNPPAN1*).* These products are made by other media companies.

(Not Panasonic products.)¡ Toll free number

XM Tuner P/N: XMD1000/XM Direct2

Call 1-800-XM-RADIO (96-72346)Extension cord P/N: XMDPAN110/CNPPAN1Call 1-800-942-TERK (8375)

About XM The direct satellite-to-receiver broadcasting technology isused to provide listeners with crystal clear soundsmoothly from coast to coast. XM is over 130 channelsof sheer variety: digital-quality music, news, sports,comedy, traffic & weather, talk, children’s programs, andmore.The XM name and related logos are trademarks of XMSatellite Radio Inc.

XM Satellite Radio IDXMD 1000

L/C 1144XXXXXX XM RADIO ID : XXXXXXXX

To switch Operation Screen ON, touch the center oftouch panel.

Preparation:¡Connect the optional XM receiver (XMD1000) with optional Digital Adaptor Cable (XMDPAN110).¡Connect the optional XM Direct2 (CNP2000UC) with optional Connection Cable (CNPPAN1).

q Touch “Source Button”.

dw Touch

(XM) on theSource SelectionScreen.

(Content varies withconnected devices)

XM Satellite Radio Mode Selection

Press [SOURCE] to change to the desiredmode.

TILTCQ-VD5005W

DIMMER DIM

TUNE/TRACK

MUTE SETUP SOURCE

POWERVOLPUSH SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXTCQ-VX100U

SOURCE

[SOURCE]

[s] [d]

Band selection

Indicates thesatellite tuner isready.

Channel information(text display)Channel

Categoryselection (*1)

Preset memory

CategoryIndicator

Channel selection

Source Button

Page 19: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

18

19CQ-VX100U

Engl

ish

up

down

Category Selection

Preset Memory

Preset Channel Calling

Up to 6 channels aresaved in the preset memo-ry.

The channel blinks once, and a receiving station issaved in the memory.

Select a band.

Operations

DVD VTR

RADIO CH-C

END

Band Selection

Channel Selection

Direct ChannelSelection

XM 1 XM 2

Select a band and channel.

¡Touch and hold for more than 2 seconds.

¡Touch desired preset button.

Touch/press once to display the category name, then touch/press again. Seeking willstart.

XM 3

…… Touch/Press and hold

Useful Function

Note:¡ Because preset memory setting is performed with

service IDs in each channel, a channel may switch toanother that has been stored under the same serviceID when calling up a preset channel. However, broad-casting contents are the same as what the storedchannel provides.

Note:¡ The direct channel selection is canceled under fol-

lowing circumstances.¡A nonexistent channel is selected.¡ is pressed and no operation is per-

formed for 8 seconds.¡For retrying selection during number entry, touch

.

*The displayed contents on the touch panel vary withcircumstances.

Show the category selection button first. *1

up

down

Switching the TextDisplay

Text display switches between 2 types asshown.

ch name (channel name)name title

categorych name (channel name)

Preset Memory

Category SelectionDisplay *1 Toggles category ON/OFF.

Setup is the same as from MENU. (a page 28)

Tuning

[d][s]

d

d

to

to

to

Page 20: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

19

20 CQ-VX100U

Engl

ish

Bluetooth Unit Control (Audio)

q Touch “Source Button”.

dw Touch

(Bluetooth) onthe SourceSelection Screen.

(Content varies withconnected devices)

Bluetooth Audio Mode Selection

Press [SOURCE] to change to the desiredmode.

Preparation:¡Connect the Bluetooth Unit (CY-BT200U, option) to this unit.

To switch Operation Screen ON, touch the center oftouch panel.

Display of connection state¡ (Connected model): A Bluetooth audio device is con-

nected.¡ No Connection: Requires connection because no con-

nection is established.¡ No Paired Device: Requires registration because no

registration is performed.

Note:¡ The Bluetooth audio devices that can be played with this unit must be compatible with A2DP (Advanced Audio

Distribution Profile) or AVRCP (Audio/Video Remote Control Profile). ¡ Please refer to the operating instructions of the Bluetooth unit (CY-BT200U) for further information regarding

Bluetooth. ¡ We shall not guarantee all the functions of the Bluetooth audio device to be connected. When operations cannot be

performed via this unit, operate the system via the Bluetooth audio device. ¡ Be aware that the battery of the Bluetooth compatible device drains faster if the Bluetooth compatible device is con-

nected to this unit. ¡ Some Bluetooth devices may become unstable (such as no sound output) in the Bluetooth audio mode after deleting

both the hands-free phone and audio pairings and then pairing the audio mode again. If such a case occurs, delete the pairing and establish the pairing again.

TILTCQ-VD5005W

DIMMER DIM

TUNE/TRACK

MUTE SETUP SOURCE

POWERVOLPUSH SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXTCQ-VX100U

SOURCE

[SOURCE]

[s] [d]Operation Buttons

Bluetoothsetting but-ton

Disconnectbutton

Source Button Hands-Free button (a page 22)

Operations

DVD VTR

RADIO CH-C

END

Bluetooth Audio Settings

Registration of theBluetooth audio devicewith this unit

Touching calls the last screen.

––

q The setup screen appears.

w The registration screen appears.

e Set up the Bluetooth compatible devices to be regis-tered with this unit. (Touching stops reg-istration.)

d

dd

d

Page 21: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

20

21CQ-VX100U

Engl

ish

Operations

Bluetooth Audio Settings (continued)

Display of the regis-tered data

q The setup screen appears.

w The registered data display/selection screen appears.

e : Displays the data of the Bluetooth com-patible device connected to this unit.

: Displays the data of CY-BT200U.

d

d d

d

Setting of PIN(Personal IdentityNumber) code

––

q Call up the registered data of CY-BT200U (seeabove).

w The PIN code entry screen appears.

e Enter your desired number. (For retrying selectionduring number entry, touch .)

d

d d

d

– r Determine the entry. d

Deletion of the regis-tered dataNote:¡ The registered data of

the hands-free phone isnot deleted by thisoperation. Refer topage 23 to delete theregistered data of thehands-free phone.

q The setup screen appears.

w The screen to decide whether the registered data isdeleted appears.

e : Deletes the registered data. (Touch ofagain determines the deletion.)

: Does not delete the registered data.

d

d d

d

Operations

Basic Operation

File Selection [d] Next file

Beginning of the current filePrevious file (Touch/press twice.)

[s]

Fast Forward Fast forwardRelease to resume playback.

Connection cancella-tion –

The connection between this unit and the Bluetooth com-patible device is canceled.

or

d

Play/Pause Touching toggles playback or pause.–

DVD VTR

RADIO CH-C

END

DVD VTR

RADIO CH-C

END

to

or

Touching calls the last screen. …… Touch and hold for more than 2 seconds

Page 22: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

21

22 CQ-VX100U

Engl

ish

Bluetooth Unit Control (Hands-free Phone)

Source selectionq Touch “Source Button”.

dw Touch

(Bluetooth) onthe SourceSelection Screen.

(Content varies withconnected devices)

Bluetooth Hands-free Phone Mode Selection

Press [SOURCE] to change to the desiredmode.

Preparation:¡Connect the Bluetooth Unit (CY-BT200U, option).

Telephone picking upPress [Hang-on] of the Bluetooth unit (CY-BT200U)when receiving a telephone call. (Registration of yourmobile phone in advance is required.)Note:¡ Even pressing [Hang-up] provides the state of pick-

ing up the phone during a call incoming for somemobile phone models.

Note:¡ To have a mobile phone conversation with use of this unit, the mobile phone shall be compatible with the Hands-Free

Profile. ¡ Refer to the operating instructions of the Bluetooth unit (CY-BT200U) for further information regarding Bluetooth. ¡ We shall not guarantee all the functions of the Bluetooth-ready mobile phone to be connected.¡ Some Bluetooth devices may become unstable (such as no sound output) in the Bluetooth audio mode after deleting

both the hands-free phone and audio pairings and then pairing the audio mode again. If such a case occurs, delete the pairing and establish the pairing again.

TILTCQ-VD5005W

DIMMER DIM

TUNE/TRACK

MUTE SETUP SOURCE

POWERVOLPUSH SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXTCQ-VX100U

SOURCE

[SOURCE]

Call/End button

Source ButtonPhone number

Disconnectbutton

Bluetoothsettingbutton

Calling methood selection button

Switch unit of CY-BT200U

[Hang-on]

[Hang-up]To switch Operation Screen ON, touch the center oftouch panel.

e Touch .d

Operations

DVD VTR

RADIO CH-C

END

Bluetooth Hands-free Phone Settings

Registration of theBluetooth-ready mobilephone with this unit

Touching calls the last screen.

––

q The setup screen appears.

w The registration screen appears.

e Set up the Bluetooth compatible devices to be regis-tered with this unit. (Touching stops reg-istration.)

d

dd

d

Page 23: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

22

23CQ-VX100U

Engl

ish

Operations

Bluetooth Hands-free Phone Settings (continued)

Transmission of thetelephone directorystored on the mobilephone to this unit

Note:¡ To use this function,

the mobile phone shallbe compatible with theObject Push Profile.

q The setup screen appears.

w The screen on which the contents of the telephonedirectory are selectable appears.

r Set up the mobile phone whose telephone directoryis transmitted. (Touching stops transmis-sion.)

Deletion of the regis-tered dataNote:¡ The registered data of

Bluetooth audio devicesis not deleted by thisoperation. Refer topage 21 to delete theregistered data ofBluetooth audio devices.

q The setup screen appears.

w The screen to decide whether the registered data isdeleted appears.

e : Deletes the registered data. (Touch ofagain determines the deletion.)

: Does not delete the registered data.

e The screen on which the contents of the telephonedirectory can be written or edited appears.

Touching calls the last screen.

Display of the regis-tered data

q The setup screen appears.

w The registered data display/selection screen appears.

e : Displays the data of the Bluetooth com-patible device connected to this unit.

: Displays the data of CY-BT200U.

d

d

Setting of PIN(Personal IdentityNumber) code

– –

––

q Call up the registered data of CY-BT200U (seeabove).

w The PIN code entry screen appears.

e Enter your desired number. (For retrying selectionduring number entry, touch .)

d

r Determine the entry.

DVD VTR

RADIO CH-C

END

d

d

d

dd

dd

dd

dd

dd

dd

dd

or

to

or

Page 24: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

23

24 CQ-VX100U

Bluetooth Unit Control (Hands-free Phone)En

glis

h

Operations

Bluetooth Hands-free Phone Settings (continued)

Deletion of all the con-tacts

q The setup screen appears.

w The screen on which the contents of the telephonedirectory are selectable appears.

d

d

d

d

–(Touch a con-tact.)

to ,or ,or

dd

dd

dd

dd

dd

dd

dd

dd

e The screen on which the range of deleting the con-tacts can be specified appears.

r The screen to decide whether or not to delete all thecontacts appears.

t : Deletes all contacts.: Does not delete all contacts.

Deletion of the contactspiece by piece

q Call the screen on which the range of deleting thecontacts can be specified (see above).

w The telephone directory appears.

e to : Selects the initial of the contact. or : Calls a currently undisplayed initial.

or : scrolls up/down the list by 1 line.

r The screen to decide whether or not to delete thecontact appears.

t : Deletes the contacts.: Does not delete the contacts.

Connection cancella-tion

The connection between this unit and the Bluetooth com-patible device is canceled. (Touch again to reconnect.)

Deletion of the record q : Displays the incoming call record.

: Displays the outgoing call record.

w The screen to decide whether or not to delete all thereceiving/calling records appears.

e : Deletes all the receiving/calling records.: Does not delete all the receiving/callingrecords.

DVD VTR

RADIO CH-C

END

or

or

or

or

Touching calls the last screen. …… Touch and hold for more than 2 seconds

Page 25: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

24

25CQ-VX100U

Engl

ish

q The phone number entry screen appears.

w Enter a telephone number. (For retrying selectionduring number entry, touch .)

d

d

d

d

e Make a call.

Note:¡ Reception of a call at MUTE-on temporarily cancels

the mute function and disables operations. After endof phone communication, the mute function resumes.

¡ Source change and -related operations in themenu are not feasible during reception of a call. Butvolume is adjustable and the power can be turned offeven during reception of a call.

¡ Reception of a call at power-off does not turn on thepower of this unit.

¡ The contents of the telephone directory registeredwith this unit cannot be added, edited, or deleted part-ly. To change the contents of the telephone directory,delete all the contents of the telephone directory regis-tered with this unit and perform registration again.

Sound

Operations

Basic Operation

Telephone numberentry to make a call

Use of outgoing/incom-ing call records tomake a call

Use of telephone direc-tory to make a call

Touching calls the last screen.

DVD VTR

RADIO CH-C

END

to ,/

–(Touch therecord.)

dd

q : Displays the incoming call record.

: Displays the outgoing call record.

w Make a call to the selected record.

or

–(Touch a con-tact.)

(Touch the tele-phone number.)

to ,or ,or

dd

dd

dd

q The telephone directory appears.

w to : Selects the initial of the contact.or : Calls a currently undisplayed initial.

or : scrolls up/down the list by 1 line.

e The screen on which the telephone number of thecontact is selectable appears.

r Make a call.

(continued)

Selection of privatemode conversation

Note:¡ This operation is

enabled only during atelephone call.

Every time this button is pressed, this function isswitched between ON and OFF.

: Switches from hands-free conversationto private conversation with use of themobile phone during a call.

: Enables hands-free conversation.

Page 26: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

25

26 CQ-VX100U

Engl

ish

iPod Control

Note:¡ Disconnect the iPod from this unit, reset the iPod, and

connect the iPod again when a problem occurs includ-ing the following: the iPod is not recognized/the iPodis not operable from the iPod itself or this unit/theimage or sound from the iPod connected to this unitis not correctly reproduced.

¡ “NO iPod” appears until the iPod is recognized afterconnecting the iPod, turning on the power of the mainunit, or performing source selection on the main unitside. This indicates there is nothing wrong with themain unit.

¡ We shall not guarantee all the functions of the iPod tobe connected.

¡ The iPod equipped with a dock connector is exclusive-ly connectable.

¡ The number of displayable characters for a file nameis limited. (up to 252 bytes)

¡ Refer to page 5 for the connectable iPods and thesoftware versions.

¡ Operation check has been completed with softwareavailable at the end of September, 2007. We do notguarantee the operation with our future products orupgraded software.

¡ Moving pictures downloaded with iTunes are exclu-sively playable on this unit. Moving pictures usingMass Storage Class are not supported.

¡ It may take time for the unit to change the source tothe iPod after iPod connection.

¡ The selected track through the list selection may bedifferent from the actual playing track.

¡ This unit may unstably operate during list selection.

To switch Operation Screen ON, touch the center oftouch panel.

Preparation:¡Connect the iPod through connecting cable (CA-DC300U or CA-VDC300U, option).

q Touch “Source Button”.d

w Touch (iPod) on theSource SelectionScreen.

(Content varies withconnected devices)

iPod Mode Selection

Video Mode Display Audio Mode Display

Press [SOURCE] to change to the desiredmode.

TILTCQ-VD5005W

DIMMER DIM

TUNE/TRACK

MUTE SETUP SOURCE

POWERVOLPUSH SEL

AV1 IN

OPEN

CLOSEDIMMER

IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER

TILT

TEXTCQ-VX100U

SOURCE

[SOURCE]

[s] [d]

Source Button

Information of current track/file

Text/title scroll

Operationbuttons

Current track

Source Button Playing time

Button leadingto the videomodeTitle/text scroll

Operation Buttons

Source Button Playing time

Button leadingto the audiomodeTitle scroll

Operation Buttons

Page 27: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

26

27CQ-VX100U

Engl

ish

List Selection

q Touch (list name) to select theplay list. Video mode: Video Playlists/Movies/Music VideosAudio mode: Playlists/Artists/Albums/Songs/Genres

, : scrolls up/down the list by 1 page., : scrolls up/down the list by 1 line.

DVD VTR

RADIO CH-C

END

w Select a folder in the same manner as q. e Touch (file name) to play.Note:¡ [s] and [d] of the main unit can scroll up and

down the file list by 1 page, respectively, too. ¡ It is not possible to display the whole tree and file list

in a folder.¡ The displayed contents on the touch panel vary with

circumstances.

File Selection

DVD VTR

RADIO CH-C

END

Selection of videomode or audio mode

[d] Next file

Fast Forward/Fast Reverse

[d] Fast forwardRelease to resume playback.Fast reverseRelease to resume playback.

Title Scroll – Scrolls the title once.

– To cancel, touch again.

Pause – To resume playback, touch again or touch .

[s]

[s] Beginning of the current filePrevious file (Touch/Press twice.)

Operations

General Operations

or

DVD VTR

RADIO CH-C

END

Repeat Play

– To cancel, touch again.Shuffle Songs

Operations

Operation for Audio Mode

…… Touch/Press and hold

…… Touch/Press and hold

Note:¡The All Repeat Play function of iPod is always activated and cannot be canceled from

this unit.

Note:¡The shuffle function of iPod corresponds to the Random function of this unit.

*

– To cancel, touch and hold again.Shuffle Albums *

* Touch panel symbols will change to indicate these current mode.

: Changes from the audio mode to the video mode.: Changes from the video mode to the audio mode.

Every time the iPod is switched from the audio mode to the video mode, the listselection screen appears first (not the video operation screen). Touch the listname to select the play list and play the desired video file.Note:¡ The “Disp” button on the touch panel will be disabled while the video list

selection screen appears. However, this phenomenon is not a trouble withthe main unit. Use the list selection screen to play the desired video file.

Page 28: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

27

28 CQ-VX100U

Engl

ish

This is a guide book specific to system upgrading. Please refer to the operating instructions for basic operations,menu operations, specifications, etc.

Settings

InputInput selection

Note: ¡If a non-Panasonic navigation system is connected to

this unit, we do not guarantee the operations of thenavigation system.

: Video output of DVD changer is con-nected to EXT VIDEO IN.

: unconnected

default:

Note: ¡This menu appears only when the expansion module

(CY-EM100U, option) is connected.

: an extenal device is connected to EXTVIDEO IN.

: skips Ext. Indefault: Ext. In

Skip

Ext. In

(Ext. In input selection)Ext. In

Off

Off

On

(Video input for DVD Changer)CH-C Video Input

RadioDiscSoundScreenBasic Setting

FM Setup(a Operation Instructions)

XM SetupSetting of XM Radio

Preparation: Connect XM Radio receiver. (a InstallationInstructions)

: enables category switching

: disenables category switching

default:

Note: ¡Channel selection while is set is performed within

the same category. (a page 19)

SIRIUS SetupSetting of Sirius Satellite Radio

Preparation: Connect Sirius Satellite Radio Receiver. (a Installation Instructions)

12-digit ID number always appears.

: Changes the channel within the selected category.

: Changes the channel regardless of the category.

default:

Note: ¡Channel selection while is set is performed within

the same category. (a page 17)On

Off

Off

On

(Category setting)Category

(Sirius ID)SIRIUS ID

On

Off

Off

On

(Category setting)Category

RadioDiscSoundScreenBasic Setting

Page 29: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

28

29CQ-VX100U

Engl

ish

: Proceed the setting.

to 4 digits numeric codedefault:

How to change your pass-codeq Enter the preset (old) 4 digit pass-code. If the wrong pass-

code is entered, a new pass-code cannot be registered.w Enter a new 4 digit pass-code.e Enter the new 4 digit pass-code again.

: Proceed with the setting.q Input the passcode.

to 4 digits numeric code

w Set each item.

: enables the parental lock

: disables the parental lock

default:

: Proceed the setting. Select the channelnumber to be locked or unlocked.

How to lock/unlock the channelq Select the desired channel.w Touch / button toggles the channel to be

locked or unlocked.

: The channel is locked.

: The channel is unlocked.

, : Scrolls up/down the channel list by 1page.

, : Scrolls up/down the channel list by 1 line.

UnLock

Lock

Setup

(Channel lock activation/cancellation)Lock/UnLock

On

Off

On

(Channel lock setting)Parental Lock

Pass-code entry isrequired.

90

Setup

(Channel lock setting)Parental Lock

000090

Setup

(Pass-code Setting)Passcode

Page 30: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

30 CQ-VX100U

29

Engl

ish

Troubleshooting

■ XM Satellite Radio Control

❑ If You Suspect Something WrongCheck and take steps as described below.

If the described suggestions do not solve the problem, it is rec-ommended to take the unit to your nearest authorized PanasonicServicenter. The product should be serviced only by qualified per-sonnel. Please refer checking and repair to professionals.Panasonic shall not be liable for any accidents arising out of neg-lect of checking the unit or your own repair after your checking.Never take measures especially those other than indicated byitalic letters in “Possible Solution” described below becausethose are too dangerous for users to handle themselves.

Warning¡Do not use the unit in an irregular condi-

tion, for example, without sound, or withsmoke or a foul smell, which can causeignition or electric shock. Immediately stopusing the unit and consult your dealer.

¡Never try to repair the unit by yourselfbecause it is dangerous to do so.

Channel unselectableNo contract with XM Satellite Radio Inc..aRefer to page 18 of this book and the XM’s website to sign up for XM Radio

service.

■ Car Navigation, VCR, Camcorder, Rear View Camera, Rear Monitor

The picture from a carnavigation system is not

displayed.

The connection of a car navigation system is not correct.aConnect it correctly.

Input setting of a car navigation system is not correct.aCorrect the input setting.

The picture from a VCR or acamcorder is not displayed.

A VCR or Camcorder is not connected correctly.aConnect a VCR or Camcorder correctly.

The picture from a rearview camera is not

displayed.

Rear view camera is not connected correctly.aConnect a rear view camera correctly.

Input setting of camera is not correct.aCorrect the input setting.

Problem Possible cause a Possible solution

■ iPod Control

The iPod is notrecognized. The iPod isnot operable from theiPod itself or this unit.

The image or soundfrom the iPod connected

to this unit is notcorrectly reproduced.

Communication between this unit and the iPod may be temporarily interruptedeven when both of them are active. This phenomenon does not indicate that thisunit is out of order.aDisconnect the iPod and reset the iPod. After completion of iPod reset, con-

nect the iPod again.

Page 31: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

30

31CQ-VX100U

Engl

ish

❑ Error Display Messages

Note:¡There may be cases when the disc numbers affected by an error are displayed before “Non Playable Disc”.¡Displays and the steps to be taken for errors vary in part from changer to changer. For details, refer to the Operating

Instructions for the changer used.

■ CD Changer/DVD Changer ControlDisplay Possible cause a Possible solution

■ XM Satellite Radio Control

Non Playable Disc

Disc is dirty, or is upside down.aCheck disc.

Disc has scratches.aCheck disc.

Mechanism errorNo operation by some cause.aPress [u]. If failure persists, press the reset switch. (Press the reset switch in

the CD changer). If normal operation is not restored, call the store where youpurchased the unit or the nearest Panasonic Servicenter.

File error The type of the file that is selected is not supported.aCheck disc.

No Disc No disc is in the player.aInsert disc into the disc slot.

No magazine No magazine is in the changer.aLoad the changer with CD-loaded magazine.

Region Code error An attempt was made to play a disc with a region number other than “1” or “ALL”.aPress [u] and check the disc.

No XM Cannot receive XM Satellite Radio.aVerify the wiring.

Antenna XM antenna unconnected.aConnect the XM antenna.

No signal XM broadcasts unreceivable because of poor receiving conditions.aMove to an area where XM broadcasts can be received well.

Off air Channel not in service.aThis channel is not currently in service. Tune to another channel.

Page 32: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

31

32 CQ-VX100U

Troubleshooting (continued)En

glis

h

■ Sirius Satellite Radio Control

No SIRIUS Cannot receive Sirius Satellite Radio.aVerify the wiring.

Antenna error Sirius antenna unconnected.aConnect the Sirius antenna.

■ iPod Control

No iPod The iPod cable was disconnected in the iPod mode.aReconnect the iPod cable.

No songs Your iPod has no playable music.aDownload playable music to your iPod.

Call 888-539-SIRIUS

User’s registration has not been carried out.aComplete user’s registration.

A channel that is not included in the agreement was selected.aSelect a channel that is included in the agreement. Refer to the operating

instructions for Sirius receiver with regard to the agreement.

Sub updated

The subscription information was updated.aWait for 3 minutes in the Sirius mode.

Your location is out of receivable areas (e.g. in a tunnel), or the unit is decoding aselected broadcast. The display appears also while the connections are beingchecked after the power has been turned on.aWait until getting out of the unreceivable area or completing the decoding.

Page 33: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

32

33

Engl

ish

CQ-VX100U

Memorandum

Page 34: System Upgrade Guidebook Guide pratique de mise à niveau ......¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia

©2007 Matsushita Electric Industrial Co., Ltd. YFM264C064CA PTW1107-1018 Printed in ChinaImprimé en ChineImpreso en China

Panasonic ConsumerElectronics Company,Division of PanasonicCorporation of North AmericaOne Panasonic Way, Secaucus,New Jersey 07094http://www.panasonic.com

Panasonic Sales Company,Division of Panasonic PuertoRico, Inc. (“PSC”)Ave. 65 de Infantería, Km. 9.5San Gabriel Industrial Park,Carolina, Puerto Rico 00985http://www.panasonic.com

Panasonic Canada Inc.5770 Ambler Drive,Mississauga, OntarioL4W 2T3http://www.panasonic.ca


Recommended