Made in The U.S.A.
Load Climber
Simply the Best!
Electric Pulltarps® Systems
Manual Arm Upgrade
Pulltarps - California1404 N. Marshall Ave.El Cajon, CA 92020Office: (619) 449-8860Fax: (619) 449-3782(800)-368-3075Pulltarps - Colorado9700 East 104th Ave. Unit AHenderson, CO 80640(800)-368-3075Pulltarps - Ohio400 W. Elm StreetNorth Baltimore, OH 45872(800)-368-3075
Our Load Climber is a simple solution to keep the pullrod from digging into peaked loads. The Load Climber’s rollers lift the tarp up over the load. The Load Climber can easily be added to your pullrod without modifying the tarp.
All Semi-Automatic Pulltarps® Systems are easy to retrofit with Manual Arm Kits. Manual Arms are an economical solution to covering heaped loads on shorter applications. All arm kits are available in steel or aluminum material and bent or straight configurations.
All Semi-Automatic Pulltarps® Systems can be converted to electric drive, manual arms, or automatic arms.
Electric Pulltarps® Systems are designed for longer applications where spring tension alone is not enough to return the tarp. The electric motor feeds the tarp out as you pull and then retracts the tarp back in. The powerful Superwinch® motor has a 3 year prorated warranty.
9” Open System
Part #110-0215
Part #111-0215
Part #501-0901
Universal Super Shield System
• Powerful 1.1 hp Superwinch® electric motor• 1.3 hp Superwinch® electric motor available• Remote control option available• Works great in high wind applications
www.pul l tarps.com1-800-368-3075
6/8/10* For Full Details on Lifetime Guarantee visit www.pulltarps.com/guarantee.htm
www.pulltarps.com 1-800-368-3075
Simply the Best!
End CapsThe fiberglass reinforcednylon end caps providefriction free operation even in subzero temperatures. Lasts longer than bearings because they’re not affected by salt, moisture or grit.
Internally Webbed Aluminum PullrodThe Pullrod has an internal web pattern that provides maximum strength. The tarp slides into the groove on
the Pullrod. The Pullrod comes in contact with the load before the tarp does.
Bungee CordThe orange and black polypropylene truckers’ rope has a bungee cord with a ring attached so it doesn’t need to be tied off.
Tarp GuidesThe Tarp Guides keep the Pullrod centered on the truck body while
in operation.
SpringThe Springis plated to resist corrosion and has a lifetime guarantee.
40 oz. Wear PatchProtects the tarp whereit folds over the tailgate.
GrommetsCome standardon all tarps.
Tarp Return RampsWelded to the tailgate, the Tarp Return Ramps help secure the tarp while deployed. The angle at the top allows for easy retracting of the tarp. Zinc plated steel or aluminum.
Braided LoopThe hand braided rope goes through the webbing loop to prevent hanging up when pulling over the tailgate.
Galvanized Roller TubeEasily remove or install any tarp. Tarp slides in and out of the groove on the roller tube.
Exclusive Mounting SystemThe threaded mounting bars weld to the truck body and the system is bolted in place. Exclusive mounting bars make installation, maintenance, and removal easy.
Rope StorageHooksThe hooks are providedfor front and rear rope storage. Zinc plated steel or aluminum.
Exclusive Dimpled Steel SleeveThe Dimpled Sleeve does not
rotate. This protects the tarp frombeing cut by the rotating PVC.
PVC RollersThe PVC Rollers roll along the top rail
providing friction free operation. Can be replaced with
common PVC Pipe.
Built To Last
• Black Powder Coated End Plates• Economical• Optional Spacer Rod available (shown)• Optional Wind Guard available (501-1001)• Holds up to 30’ of tarp• Can ship via UPS
9” Open System Part #105-0215
• Galvanized protector for a clean appearance and will not rust.• Excellent protection from loader bucket damage and falling debris• No rust galvanized End Plates• Holds straight tarps up to 30’
X-Pando Part #116-3017
A basic system great for applications where loader and wind damage is not a concern. Available options include Spacer Rod, and Aluminum Wind Guard
Super tough X-Pando housing that adjusts to fit any truck between 78” to 102”.
Designed for longer applications that require some protection from falling debris. Available in steel.
Designed for truck enthusiasts who want their tarp system to look as good as their rig.
Designed for weight saving applications. Comes complete with windguard.
Powder coated 12 gauge steel housing for highest protection against loader damage and falling debris.
Offers good protection against loader damage, falling debris, and wind.
This is our best selling system with the highest capacity. It is fully welded and powder coated for the best protection from falling debris.
• Aluminum End Plates• Holds up to 22’ of tarp• Exclusive mounting bars make installation, maintenance, and removal easy • Can ship via UPS
7” Aluminum Part #103-0215
• Fully Welded• Powder coated steel housing resists corrosion• The housing is radiused for added strength• Exclusive mounting bars make installation, maintenance, and removal easy• Holds up to 18’ of tarp
Super Shield Part #107-0215
• Ships Fully Assembled via UPS• Galvanized End Plates• Galvanized Steel Housing• Housing has a vertical back that mounts flush with cab shield• Holds up to 18’ of tarp
Steel Protector Part #106-0215
• Powder coated steel housing resists corrosion• The housing is radiused for added strength• Holds up to 30’ of tarp• Exclusive mounting bars make installation, and removal easy
Universal Super Shield Part #108-0215
• Galvanized End Plates• Galvanized Steel Housing• Holds up to 28’ of tarp• Ships fully assembled via UPS
Steel Protector Plus Part #114-0215
• Great looking polished aluminum housing• Machined Aluminum End Plates with Black Accent Relief • Holds up to 30’ of tarp• Exclusive mounting bars make installation, maintenance, and removal easy
Ultimate Aluminum Part #109-0215
9” Open Pulltarps System X-Pando Pulltarps System
Pulltarps® Systems
Protector Plus Pulltarps System Ultimate Aluminum Pulltarps System
7” Aluminum Pulltarps System Super Shield Pulltarps System
Steel Protector Pulltarps System Universal Super Shield Pulltarps System
External Ratchet AssemblySemi-Automatic Pulltarps® Systems are the original
spring-return tarping system. These systems operate by manually pulling the tarp out over the load with a pullrope. The tarp is then rolled back into the housing using the spring tension within the roller mechanism. These tarp systems are great for most applications and are the economical solution to your tarping needs. Stock widths include 80”, 84”, 87”, 89”, 93”, 96”, and 100” inches. All systems include steel or aluminum mounting brackets/ mounting bars. All Semi-Automatic Pulltarps® Systems have a lifetime guarantee* on all moving parts.
Another exclusive feature of Super Shields, Ultimate Aluminum systems, and X-Pando systems is its External Spring Tensioning capabilities. This ratchet mechanism makes adjusting the spring fast and easy without removing the tarp.