NEW
S 1
2.13
Gov
oni s
rl |
Via
deg
li O
rsi 9
7 |
400
14 C
reva
lcor
e (B
O)
| Te
l.: 0
039
051
612
03 2
8 |
ww
w.g
ovon
i.it
Spe
cial
ty A
utom
otiv
e To
ols
ww
w.
go
vo
ni
.i
t
Injectors extractor kit special FIAT GROUP
Extractor to remove Bosch injectors assembled on FIAT diesel engines
Bosch
CYLINDERS AND HYDRAULIC PUMP MATCHING TO THE KIT AVAILABLE
cod. 270 019 000Hydraulic cylinder 12 TON, stroke 8 mm
cod. 270 020 000Hydraulic cylinder 20 TON, stroke 8 mm
cod. 270 022 000Mechadraulic cylinder 12 TON, stroke 8 mm
cod. 271 004 000Hydraulic pump 700 bar
Ideal for hydraulic use
311 183 000Complete Kit
MODEL TYPE ENGINE
FIAT
500, 500C, 500L, Panda, Punto, Grande Punto, Punto Evo, Linea, Bravo, Stilo Marea, Croma, Sedici, Qubo, Idea, Doblo’, Multipla, Freemont, Strada Pick-Up, Fiorino, Ducato
1.3, 1.6, 1.9, 2.0, 2.4 M-JET - JTDm - CDTi - TiD
LANCIA Ypsilon, Musa, Delta
ALFA ROMEO MiTo, 147, Giulietta, 156, 166, Brera, GT, Spider
OPEL Agila, Corsa, Meriva, Astra, Combo, Tigra, Zafira
SUZUKI Swift, Splash, Ignis, Wagon R+
SAAB 9.3
Special extractor for removing extremely sized Bosch injector.Double application: in Line with injectors as like as on 1.3 MJ engine,
with simultaneous extraction of two injectors; or with complete bridge frame and adjustable positioning.
The adjustable positioning of the frame side bars allows to set the tool according to the compliance of the cylinder head, thus ensuring the possibility to use it on all engines DOHC (Double Over Head Camshaft)of Fiat group.
Flexible both for mechanical usage and hydraulic application; thanks to the special long screws (included), the kit can be used combined with our hydraulic cylinders 12 and 20 Tons, and also in combination with our hydraulic pump 700 bar ( not included - sold separately).
*
In-line application
Bridge frame application
continued »
NEW
S 1
2.13
Gov
oni s
rl |
Via
deg
li O
rsi 9
7 |
400
14 C
reva
lcor
e (B
O)
| Te
l.: 0
039
051
612
03 2
8 |
ww
w.g
ovon
i.it
Spe
cial
ty A
utom
otiv
e To
ols
ww
w.
go
vo
ni
.i
t
Injectors extractor kit
Components
Body of the cross member to remove injectors 311083005
Bearing foot with fixing nut (N°3 pc.) 311083001
Screw M18X1.5 injector removal (N°2 pc) + Ring nut M27x1 to lock the injector (N°2 pc)
311070017 - 311070018
Supporting washer with bearing 311083004
Hexagon wrench 10 mm to remove the electrode of the injector 311026014
M18X1.5 nut to be used with M18 screw (N°2 pc) 311070006
29 mm socket to extract the electrical connection 720019000
Supporting feet for the cross member with eccentric hole (N°4 pc) 311093001
Fixing plate for the bearing foot (N°5 pc) 311070016
Beam to support the cross member + pin to fix the cross member + screw TCCE 8X16 (N°2 pc)
311093004
Screw TCCE 8X45 (N°4 pc) 822009000
Screw M18x1,5 L=353,5mm (N°2 pc) TO BE USED WITH 12/20 TON HYDRAULIC CYLINDERS
311146019