© Bene GmBH, 01/2018
T-WORKSTATIOn
1
T-WORKSTATIONT-Workstation is a technologically advanced desk programme with high systemic smart features that can be shaped in various ways to meet individual customer needs. Simple to adapt to specific structu-ral environment. The desk‘s highly flexible table top
frame offers a wide range of use options - together with a variety of base frame shapes and easy to assemble. T-Workstation desk offer a virtually limitless range of combinations and are responsive to organisational change.
© Bene GmBH, 01/2018
1
3
2
T-WORKSTATIOnPRODUCT DeSCRIPTIOn
2
1
2
3
Table top: Three board thickness are available:13 mm compact top, 19 mm, or 25 mm chipboard
Edge (circumferential): Chipboard 19 mm: 2 mm mono-edge, 2mm duo-edge, or 3 mm mono-edge. Chipboard 25 mm: 2 mm mono-edge or 3 mono-edge.
Frame: 4-leg rectangular pipe, 4-leg round pipe, Delta, Delta wood, Slope, C-leg, T-leg, skid slab-end, full slab-end.
PRODUCT DESCRIPTION
Table topFrameSlab-endCable trayHandle and retainer for sliding topUniversal adapterPlate connectorDiecast- clampsTable top clipPlug boxCable support arm foldable cable trayCable support arm fixed cable trayTable top slot
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4
5
6
7
8
9
10
12
11
13
© Bene GmBH, 01/2018
T-WORKSTATIOnOVeRVIeW AnD DImenSIOnS
3
OVERVIEW AND DIMENSIONS
Dimensions in mm
DESKTOP SHAPE TG BASIC DESK
Rounded on user side NG Angled at 150° on user side W1 Angled at 135° on user side W2
Rectangle RE 1 Rectangular RE with Soft Edge 1 Straight and sloped on user side S2 1
Sloped and rounded on user side SG 1
Equal-sided 120° angle desk W3 Combination desk K1 Desk combination K3
Connection board VP
1.622
8001.000
667
1.422667
8001.000
800800
800
1.400
800
800
1.600
800
900
1.400 - 2.400
1.000
900
1.000
800
600
800 - 2.400
900
1.000
800
600
800 - 2.400
1.000
1.400 - 2.400
1.000
1.400 - 2.400
1.200
1.200
1.131
1.131
1.000 1.000
800 8001.193
1.2931.200 1.200
800 800
1.200
1.200
1.600 - 2.400 1.600 - 2.400
1.6
00
- 1
.80
0
600
800
800
8001.200
1.000 1.200
800
800
800
600
800
800
800
600
800
800
1.6
00
- 1
.80
0
1 Worktables with full slab-end, C-leg and T-leg possible with a maximal nominal width of 2.000 mm
© Bene GmBH, 01/2018
T-WORKSTATIOnOVeRVIeW AnD DImenSIOnS
4
1.200 1.200
800 800
800
600
OVERVIEW AND DIMENSIONS
Dimensions in mm
DESK TOP SHAPES COMMUNICATION SEGMENTS TC
Visitor’s side rectangular AE
Visitor side rounded AR
Lateral over 1 table rectangular MV Lateral over 1 table rounded MU
Lateral over 2 tables rectangular ME Lateral over 2 tables rounded MR Lateral round MH
Laterally sloped MS
DESKTOP SHAPES DESK EXTENSION TA
Further installation desk RE 1 Side desk RE 1
KEY
Column position
extension dimension
Wooden structure direction
Slab-end positionSupport leg position Leg length
300
300
800 - 1.599
800 - 1.599
1.600 - 2.400
1.600 - 2.400
400
60
0
1.0
00
90
0
80
0
60
0
80
0
90
0
1.0
00
600
60
0
1.0
00
90
0
80
0
60
0
80
0
90
0
1.0
00
60
06
00
80
08
00
60
06
00
80
08
00
90
09
00
1.0
00
1.0
00
60
06
00
80
08
00
90
09
00
1.0
00
1.0
00
400
90
09
00
1.0
00
1.0
00
60
06
00
80
08
00
90
09
00
1.0
00
1.0
00
400 400 400
600 600 600
400 400 400 400
600 600 600 600
400 400 400
600 600 600 600
400 400 400 400
600 600 600 6006
00
1.2
00
80
0
1.4
00
90
0
1.5
00
1.0
00
1.6
00
600 600 600 600
600
800
900
1.000
800 - 2.400
80
0 -
2.4
00
600 800 900 1.000
1 Worktables with full slab-end, C-leg and T-leg possible with a maximal nominal width of 2.000 mm
800 900 1.000
© Bene GmBH, 01/2018
N L
L R
R
TGL
NTG
TG
L RTG RL
L R
N
T-WORKSTATIOnLATeRAL DeFInITIOn AnD DIReCTIOn OF TOP SHAPe
5
LATERAL DEFINITION AND DIRECTION OF TOP SHAPE
LATERAL DEFINITION AND DIRECTION OF TOP SHAPE
RE, NG NS, S1, S2, SG
CONNECTION POSITION AND DIRECTION OF TOP SHAPE
W1, W2, K1, K3, VP W3
RE AE, MH, MV, MU ME, MR
left side (L)
Visitor's side left (VL)
User side (U)
right side (R)
Visitor's side right (VR)
Visitor side (V)
User side (U)
lateral (S)Visitor side laterally (VS)
front (F)
Visitor side (V)
Visitor side laterally (VS)
User side (U)front (F)
Visitor side (V)
User side (U)
Visitor side (V)
User side (U)
Visitor side (V)
User side (U)
right side (R)
left side (L)
right side (R)
left side (L)
right side (R)
left side (L)
TA TA TA
TA
TA TA
n ....neutral L ....Left R .... Right
© Bene GmBH, 01/2018
740 200650
850
740 200650
850
740620
860
240
740
740 240620
860
T-WORKSTATIOnFRAme VeRSIOnS
6
FRAME VERSIONS
4-LEG RECTANGULAR PIPE 1
· Rectangular pipe 60 x 30 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: fixed or in 20 mm grid with tool
4-LEG ROUND PIPE 1
· Round pipe Ø 60 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: in 20 mm grid with tool
1 not possible in combination with desktop shape rectangle Re with Soft edge
The heights shown all refer to the upper edge of the desk when 25 mm chipboard is being used. In the case of 19 mm chipboard and 13 mm compact top, the desk height is reduced accordingly.
T-LEG · Rectangular tube 111 x 62 mm, aluminium die casting, aluminium profile · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: fixed or in 10 mm grid without tool
SLOPE · Free-form, die casting aluminium · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 740 mm fixed
C-LEG · Rectangular tube (aluminium profile) 111 x 62 mm, cantilever leg made of aluminium die casting. · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: fixed or in 10 mm grid without tool
© Bene GmBH, 01/2018
200650
850
150700
850
740
1.070
650
850
200
740
1.070
T-WORKSTATIOnFRAme VeRSIOnS
7
FRAME VERSIONS
FULL SLAB-END 1
· Thickness of slab-end 41 mm, chipboard (for melamine), mDF (for veneer), fastening construction and cover plate made of steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: in 20 mm grid with tool
SKID SLAB-END 1
· Rectangular pipe 55 x 25 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: in 20 mm grid with tool
DELTA 2
· Rectangular pipe 60 x 30 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 740 mm fixed or height adjustable between 650 - 850 mm
DELTA HIGH2
· Rectangular pipe 60 x 30 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 1.070 mm fixed
DELTA WOOD 2
· Wooden tube 57 x 53.5 mm, to steel pipe · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 740 mm fixed
DELTA WOOD HIGH2
· Wooden tube 57 x 53.5 mm, to steel pipe · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 1.070 mm fixed
1 not possible in combination with desktop shape rectangle Re with Soft edge2 not angled on user side 150° W1
© Bene GmBH, 01/2018
T-WORKSTATIOnOPTIOnS TABLe TOP
8
OPTIONS TABLE TOPCABLE OUTLETQuick and easy to pass cabling through the table top. The outlet cover can be slip to one side so that the cable can pass though it.
· 1-3 units per table top possible · Positions specified as fixed per desktop shape
PLUG BOXThe plug box is milled flush into the table top and can be equipped with a connection plug board. Quick and easy access to the plug board is enabled by opening the aluminium flap.
· 1 unit per table top possible · Position per desktop shape specified as fixed · Position in the centre up to desk width of 1.400 mm · Position left or right from desk width of 1.600 mm upwards
Cannot be combined with sliding top and cable flap.
Cable outlet ø 80 mm
Plug box315 x 125 mm
Re, SG, nG S2 VP K1 K3 W1
Possible positions of the grommet hole
Possible positions of the plug box
W2 W3
Re, SG, nG S2 K1 K3 W1 W2
W3
Plug box and integral connection plug boards “Cable and media management” price list
© Bene GmBH, 01/2018
T-WORKSTATIOnOPTIOnS TABLe TOP
9
OPTIONS TABLE TOP
CABLE FLAPCable flaps allow for easy, ergonomically correct and quick access to cable management.
· Version possible as table top or variation. · The cable flap is divided in the centre from a desk width of 1.401 mm upwards. · Installation on universal adapters included.
SLIDING TOPThe sliding top has a sliding mechanism with a latching function for locking. It can be easily slid to the front by loosening the catch and thus allowing cable management access.
· Sliding information: 190 mm
Only in combination with a cable tray.The sliding top cannot be used with a desk depth of 600 mm.Combination with cable flap is not possible.
Cable flap depth 180 mm
Possible desk top shapes
Re, SG, nG S2
Possible positions for the cable flap
Re, SG, nG S2 VP K1 K3
Only makes sense in connection with a cable tray.Combination with sliding top is not possible.If a shortened sliding top is selected, the depth of the cable flap is reduced by -31 mm.
© Bene GmBH, 01/2018
T-WORKSTATIOnOPTIOnS
10
OPTIONS
PREPARATION FOR CONNECTION TO T-PANEL (UNIVERSAL ADAPTER)The desk is automatically equipped with universal adapters in this process.This enables different elements to be connected.
· 2 units up to a desk width of 1.400 mm · 3 units from a desk width of 1.401 mm upwards
· T-Panel Pure: behind desk top with gap or behind shortened desk top · T-Panel Curve: behind desk top with gap or in top slot · T-Panel multi: behind desk top with gap or in top slot
T-Panel cannot be connected using table top clamp.
Universal adapter
TABLE TOP SLOTT-Panel multi can be installed in the table top slots. This is fitted ensuring that the rear side runs flush with the rear edge of the desk. The table top slot can also be used for quick and easy cabling through the table top. A part of the cover can be slid to one side to enable the cable to be passed though.
· Positions specified as fixed per desktop shape · 2 units up to a desk width of 1.400 mm (left and right) · 3 units from a desk width of 1.401 mm (left, centre and right) upwards
440 x 650 mm
Positions of the table top slots
Re, SG, nG S2 VP K1 K3 W1
W2 W3
Cabling is no longer possible if a T-Panel has already been installed in the table top slot.
© Bene GmBH, 01/2018
T-WORKSTATIOnOPTIOnS
11
OPTIONSCABLE TRAYThe cable tray is aimed at providing virtually invisible cable management. Depending on the situation, a fixed or foldable cable tray can be selected. A fixed cable tray is the more obvious solution if the table top is movable or its design already includes a cable flap.
With fixed tops, access to cable management is via a visitor's side foldable cable tray. Vertical cable routing can be done by means of cable chains which can be hooked in along the entire length of the cable tray.
· Foldable cable tray only possible up to a desk width of 999 mm. · Fixed or foldable cable tray possible from a desk width of 1.000 mm upwards, depending on requirement.
Possible positions for the cable tray
Cable tray, foldable for fixed top
Cable tray fixed forcable flap or
sliding top
Re, SG, nG S2 VP K1 K3 W1
W2 W3
INSTALLATION OF CONNECTION PLUG BOARDS IN CABLE TRAYSConnection plug board brackets are required as follows, depending on the number and position of the connection plug boards:
The cable tray brackets supplied can simultaneously be used as connection plug board brackets.
with fixed cable tray with foldable cable tray
1 unit
2 units
3 units
2 units
4 units
3 units
© Bene GmBH, 01/2018
T-WORKSTATIOnOPTIOnS
12
OPTIONSSUPPORTING PEDESTAL CONNECTIONCT supporting pedestals can be attached to the T-Workstation desks by means of support mounts with heights of 548 mm (9 He) and 598 mm (10 He). In this process, the slab-end is left off on the pedestal side, although the length of the frame remains unchanged. The length of the cable tray also remains the same.
A more obvious choice in connection with cable flap or sliding top. no top overlap is permitted on the pedestal side due to the danger of tipping. modesty panels are only permitted on the rear edge and if the desk depth is greater than the pedestal depth.
FIXED PEDESTAL CONNECTIONThe CT fixed pedestal with a height of 740 mm can be loosened from desks with height-adjustable or fixed-range height adjustment areas. Possible table depths for this are 600, 800, 900 and 1.000 mm. With 900 and 1.000 mm, the top of an 800 mm deep pedestal can be extended backwards by means of an overlap of the top.
The length of the frame remains unchanged.Back-fitting deconstruction to holder is only possible in certain circumstances. no excess overlap of the top is possible on the connection side. not possible for rectangle Re with Soft edge.
Possible positions of the supporting pedestal connection
Possible positions of the fixed pedestal connection
Re, SG, nG S2 VP K1 K3 W1
W2 W3
Re, SG, nG S2 VP K1 K3 W1
W2 W3
© Bene GmBH, 01/2018
T-WORKSTATIOnOPTIOnS
13
OPTIONSSIDEBOARD CONNECTIONThe sideboard is used as a frame replacement and is possible with a maximum of 1 sideboard per desk. It is possible to form a connection with the sideboard from a desk width of 1.600 mm upwards. Insertion angle is always 90°. The minimum width of the sideboard depends on the depth of the desk and amounts to 1.200 mm or 1.600 mm.
The range of height adjustment in this regard only begins from 680 mm onwards. For reasons of stability and space, the sideboard is only permit-ted with the desktop shapes shown at the bottom.
COMMUNICATIONS SEGMENT
Visitor's side assemblymaterial: Chipboard 19 /25 mm or compact top 13 mm.
Visitor’s side assembly is undertaken using the universal adapters. T-Panel (universal adapter) preparation is therefore required.
Assembly lateral over 2 desksmaterial: Chipboard 19 / 25 mm or compact top 13 mm.
The communication segment is automatically equipped with support columns from a depth of 401 mm onwards. These are square for all slab-foot versions of the basic desk. exception: in the case of 4-leg slab foot, the support columns of the communication segment cannot be selected in the round version. When a Delta frame is used, the maximum depth permitted is 400 mm.
In the communication segment shown, the desks are arranged flush with no gap. When an RV dividing wall or panels between both desks are used, the width of the communication segment is automatically adjusted correspondingly.
Possible positions of sideboard connection
visitor's siderectangular
lateralrounded over 2 desks
Re S2 SG nG
© Bene GmBH, 01/2018
14
T-WORKSTATIOnInSPIRATIOnS
INSPIRATIONS
Inspiration #01
T-Workstation Delta wood with a natural oak frame at a fixed height (740 mm). Table top of 19 mm thickness (of 1.600 x 800 mm) with a Soft edge in melamine white with a T-Panel Curve in Remix 933 (Green) fabric. Panel fitted with an organisation rail for steel trey short with natural oak wooden inserts.
Inspiration #02
T-Workstation Delta with aluminium-coloured steel frame, height adjustable (650 - 850 mm) and with a 19 mm table top (of 1.600 x 800mm) in white melamine. Includes a T-Panel Curve in Remix 123 (light grey) fabric that is fitted with an organisation rail for steel tray with aluminium-coloured inserts.
© Bene GmBH, 01/2018
15
T-WORKSTATIOnInSPIRATIOnS
INSPIRATIONS
Inspiration #03
T-Workstation Delta with white-coloured steel frame, height adjustable (650 - 850 mm) and with a 19 mm table top (of 1.600 x 800 mm) in white melamine. Includes a T-Panel Curve in Divina 462 (orange) fabric that is fitted with an organisation rail for steel tray short with flower pot.
Inspiration #04
T-Workstation Delta wood with graphite stained oak frame, at a fixed height (740 mm) with a 13 mm table top (compact), 2.000 x 1.000 mm in white melamine with a Soft edge.
© Bene GmBH, 01/2018
16
T-WORKSTATIOnInSPIRATIOnS
Inspiration #05
T-Workstation Delta with a white-coloured steel frame at a fixed height (740 mm) and 19 mm top (1.600 x 800 mm) in white melamine. Fitted with a a T-Panel Curve dividing wall, in Z-arrangement, in Remix 823 (light grey) fabric with organisation rail for a steel tray and steel tray short.
INSPIRATIONS
© Bene GmBH, 01/2018
17
T-WORKSTATIOnCOLOURS & mATeRIALS
1 not available for compact desk top2 not available for duo-edge3 not available for 3 mm edge, single colour
COLOURS & MATERIALS
mW white
mA aluminium 3
AR maple 1
Ce elm white
TX mustard
CO coco
mS slate 2.3
eI oak 1
mB basalt
nG walnut greyBH beech light 1
mT anthracitemQ office white mC canvas 3 mP platinum 2.3 Tm clay
MELAMINE: Basic colours
MELAMINE: Décor colours 2.3
MELAMINE: Décor colours with texture 1,2,3
MELAMINE: Accent colours 1,2,3
MELAMINE: Additional basic colours 1,2,3
eC oak moreda
eA oak aragon
TS fern greenTH marino blue
© Bene GmBH, 01/2018
18
T-WORKSTATIOnCOLOURS & mATeRIALS
METAL SURFACE POWDER-COATED
ALUMINIUM ANODISED
WI white SZ blackAL aluminium
AL aluminium
COLOURS & MATERIALS
VENEER: Walnut VENEER: Bamboo
VENEER: Maple VENEER: OakVENEER: Beech
eY oak, silt
nF americ. walnut
AK canad. maple eR oak, amaretto
nB walnut, umbranR walnut, sienna
BG beech, grey eV oak, volcano
nA wal., anthracite BJ bamboo
eG oak grey
KD chestnut natural KP chestnut brown KQ chestnut grey
VENEER: Chestnut