t56 'i:

EB.ElEKIIT

5€e €€ctf;$!d "'

im.:'.@-ffi

NtrlI Cl|MPlINEilT HOT [IBIE$$SPRAY PffruTIilG EQUIPMENT

The range r's design ed for tough working conditions and issuitable for two component high viscosity, so/venfless,low solvent coating, semisolid coating, marine coating,etc,

FEITURES

o Pneumatically sensed Air Motoro High Flow Rateo Stainless Steel rust proof Hydraulic Bodyo Sophisticated automatic flow valve for remote controlo Easy Maintenanceo lce Free Air Motoro Easy to handle mounted on robust trolleyo Fixed / Variable mixing ratioo Modular design to achieve various mixing ratioso Online ratio monitoringo Electrical direct or oiljacketed heating.

OPTIlIilAL

. PLC based monitoring system for mixing ratio, digitaldisplay and auto flush.

o High viscosity transfer pump with ram / drum press.o Hydraulic drive motor for high flow rating at high

pressure

Type

Mixing Ratio*

Transfer Ratio*

Out�ut perCyc e

Air Motor Piston 0

Stroke Length

Recommended Spray Volume per minute.

Air Inlet Pressure Max.

Output Pressure Max.

Air Consumption N ltr I min Max.

* Other ratios on request

TECHNICAL SPECIFICATIONS ·-

2k- 2k- 2k- 2k-350/ 350/ 350/ 350/ 79 X 79 X 150 110 X 110 X 110 110 X 110 X 79 110 X 110 X 58

1:1 2 :1 3 :1 4 :1

70 :1 65 :1 70 :1 75 :1

300 cc 340 cc 300 cc 280 cc

350 mm 350 mm 350 mm 350 mm

120 mm 120 mm 120 mm 120 mm

7.5 ltr. 8.5 ltr. 7.5 ltr. 7.0 ltr.

6 bar 6 bar 6 bar 6 bar

(

420 bar 390 bar 420 bar 450 bar

6800 6800 6800 6800 -·

� V R COATINGS PVT. LTD.

Specialized Coating Systems (Pty)Ltd www.speccoats.co.za 0861 37 2468