Table of Content - CWTCcwtc.com.pk/cwtc-old/downloads/Catalogs-FINAL-March-2016/... ·...

1Laboratory Glassware Catalog | PT IWAKI GLASS INDONESIA

Table of ContentCompany Profile

Technical Information

Product

Beaker & Flask

Volumetric Ware

Centrifuge

Condenser

Funnel and Column

Plant Culture

Tubes & Dish

Apparatus

Others

3

11

28

29

42

56

63

68

73

75

86

91

2 Laboratory Glassware Catalog | PT IWAKI GLASS INDONESIA


We arePT IWAKI GLASS INDONESIAManufactured Laboratory Glassware

Product Range

Volumetric Ware, Burette, Test Tube, Beaker, Plant Culture, Color Tube (Nessler), Centrifuge Tube,

Flask, Funnel, Condenser, Column, Bottles, Tubes, Aspirator, Soxhelet, Water Still, and Others.

Production Facilities

Test Tube Machine, Blowing Stopper Machine, Electric Conveyor Kiln, Center Less Grinding,

Bottom Sealing Machine, Flask Blow Machine, Beaker Machine, Calibration Machine, Printing Machine,

Sealing Lathe Machine, Rotary Machine, Tooling Machine, Grinding Machine, Internal Score Cutter Machine,

Bench Burner, Batch Klin, Inflame Cutter, Tip Forming Machine, Tip Hole Machine, Coil Winding Machine, etc.

Factory Address

Jl. Raya Rancaekek, Km. 24.5 Kawasan Industri Dwipapuri Abadi, Blok N 8,Sumedang, 45364Phone/Fax: 62-22-7780022 / 62-22-7793823Email: igi [email protected]

Established in September 1991

Company Profile


Production LineFabrication Line

Table Process

Grinding Process

Machine Process


Volumetric Line

Printing Process

Calibration Process

Packing Process


Test Tube/ Beaker Line

Beaker Process

Test Tube Process


Warehouse


Maintenance Activity (Supporting Production)


has set up and has been maintaining and integrated Quality Management System ISO 9001 : 2008

PT IWAKI GLASS INDONESIA


We has Set Up Vision and Mission

Vision

Strengthen our current bussiness and improve

profitability with challenging high efficiency,

new business and new customer.

Mission

Achieve improvement of production •

and sales with safety.

Achieve each target for improving the quality of •

work on schedule (efficiency, selection %,

cost reduction and better quality).

Keep watching the change of market, •

and take quick actions.

Obtain better ability for the improvement •

our business.


IWAKIbrand borosilicate glass1. Composition

2. Viscosity

3. Physical Property

4. Thermal Property

5. Mechanical Property

6. Electrical Property

7. Optical Property

8. Chemical Property

9. Mechanical Strength of Internal Pressure

volumetric glassware1. Testing of Volume

2. Volume Tolerance

3. Color Coding

4. Batch Numbering

Service

Technical Information

Care and Maintenance of Laboratory Glassware


TEChNICAL InFOrMATIOn

IWAKIbrand borosilicate glassPT IWAKI GLASS INDONESIA manufacture

Laboratory Glassware use IWAKI brand borosilicate glass.

1. Composition

Chemical composition is given in Table 1.

IWAKI brand borosilicate glass is characterized by low

coefficient of linear thermal expansion and high thermal

shock resistance, because Na2O and K2O contents are low

while it contains high B2O3.

Abrasion as well as scratch and squeeze hardness is also

excellent. Due to its superior melting technique.

IWAKI brand borosilicate glass does not require fluxing agents

and, therefore, neither bubble nor coloring appear even

during fabrication process by gas.

Table 1 Composition

Composition Percentage Approx

Si02 80.90%

AI203 2.30%

Fe203 0.03%

B2O3 12.70%

Na20 4.03%

K20 0.04%



400 600 800 1,000 1,200 1,400 1,600

Log 10

Visc

osity

1 Poi

ses

Temperature 0C

2. Viscosity

Glass has an infinite viscosity under normal temperature and will deform only at temperature which approaches its

strain points. Its viscosity normally between 1015~1012 poises. Viscosity is one of characteristic properties for measuring

glasses.

Table 2 shows viscosity of IWAKI brand borosilicate glass and figure 1 shows Viscosity temperature curve.

Working Point

Softening Point Annealing Point Strain

Point

Viscosity 104 poises 107.6 poises 1013 poises 1014.5 poises

Temperature 1,252 0C 821 0C 560 0C 510 0C

Table 2 Viscosity

Figure 1. Viscosity/Temperature Curve



(a) 150 mm x 150 mm x 3 mm(b) 150 mm x 150 mm x 6 mm(c) 150 mm x 150 mm x 13 mm

IWAK

I bor

osili

cate

Gla

ss

Linear Expansion Coefficient (X10-7/0C)

Tem

pera

ture

Diff

eren

ce in

The

rmal

Str

ess (

0 C)

3 . Physical Property

Remarkable point of IWAKI brand borosilicate glass

is low coefficient of linear thermal expansion, as

shown in table 3. It is also one of characteristic

properties that density is low, compared with metal

and soda lime glass.

Description Value

Specific heat (25 0C)

Average (25 0C - 400 0C)

0.17 cal/g. 0C

0.233 cl/g. 0C

Thermal conducitivity (25 0C)

Thermal conducitivity (100 0C)

0.0026 cl/cm.sec. 0C

0.0030 cal/cm.sec. 0C

Linear coefficient of expansion

(0 0C ~ 300 0C)32.5 x 10-7/ 0C

Density 2.23 g/cm3

Table 3 Physical Property

4. Thermal Property

Glass normally fails as a result of sudden cooling

or heating. The surface of glass is subjected to

tensile stress during cooling and compression

stress during heating. Failure often results from

the tensile component of stress, even when the

load is applied in compression. Glass is much

stronger under compressive loads than under

tensile loads.

The reason being that tensile stress applied

on the surface of glass becomes stronger

than maximum strength of glass. As shown on

formula (1) the lower the coefficient of thermal

expansion, the higher the thermal resistance.

hence , IWAKI brand borosilicate glass is strong

and durable against thermal shock. In general,

thermal endurance of glass defends on form,

condition of finishing, etc. Figure 2 shows rates

of linear expansion coefficient and temperature

difference in thermal stress for 3 different wall

thicknesses of glass plates.

Figure 2. Thermal Shock Resistance

Expression of Thermal Stress

..............(1)2(1 )

th αδε

Ε∆Τ=

−

∆Τ

thδΕα

ε

: Thermal stress kg/cm2

: Young’s module kg/cm2

: Linear expansion coefficient 1/ 0C

: Temperature difference 0C

: Poisson ratio



6. Electrical Property

Glass is widely used in the electrical industry as

insulator, lamp and parts for electronic tube, etc.

IWAKI brand borosilicate glass has a large dielectric

power, high volume resistance, high surface

resistance and a smooth solid surface.

It also has a low dielectric loss without carbonizing

by action of arc and conductivity.

Figure 3, 4, 5 show the characteristic of electrical

properties and table 5 indicates the detailed

property data.

Young’s Module 6.4 x 105 kg/cm2

Poisson’s Ratio 0.20

Shear Modules 2.7 x 105 kg/cm2

Knoop hardness (100 g) 418 KhN

Bending Strength 4~7 x 102 kg/cm2

Design Stress (Safety factor) 67 kg/cm2

Table 4 Mechanical Properties

5. Mechanical Property

Fracture occurs at the maximum point of tension. The theoretical Strength of glass is 200,000 kg/cm2. However,

breaking strength is commonly found to occur at tensile strenght of about 500 kg/cm3, because of surface scratch and

thermal stress formation when designing glass components, or during fabrication and transportation, etc. Thus glass

breakages are very much dependent on:

Method of production•

Method of Fabrication•

Method of heat treatment•

Actual usage and care•

IWAKI formulates glass components with the

consideration of safety measures of several folds.

IWAKI borosilicate glass is stronger than commercial

glass, because of its mechanical strength which

prevents surface scratch.

Table 4 shows the mechanical properties of IWAKI

borosilicate glass.

Dielectric strength (Thickness 0.1 mm) 4,800kV/cm

Volume resistivity (log 10) (25 0C)

(250 0C)

(350 0C)

15 Ω . cm

8.1 Ω . cm

6.6 Ω . cm

Dielectric power factor (1 Mhz 20 0C) 0.50 %

Dielectric constant (1 Mhz 20 0C) 4.6

Dielectric loss 0.4 %

Table 5 Electrical Properties



Temperature of glass (0C)


Wave Length (nm) Wave Length (nm)

Diel

ectr

ic P

ower

Fac

tor (

1 M

hz)

Volu

me

Resis

tivity

(log

10 Ω

cm

)

Perc

enta

ge o

f Tra

nsm

issio

n (%

)

Figure 4. Dielectric Power Factor vs

Temperature

Figure 6. Spectral Transmittancy


Diel

ectr

ic C

onst

ant (

1 M

hz)

7. Optical Property

IWAKI brand borosilicate glass can highly transmit light, due to use of refined materials containing a low percentage of

iron. Its Refractive Index (nD) is 1.474. Figure 6 shows spectral transmittancy.

Figure 3. Volume Resistivity vs Temperature of Glass

Figure 5. Dielectric Constant vs Temperature of Glass



8. Chemical Property

Chemical durability of glass means chemical resistance towards chemical attack. The surface of glass is constantly

under attack by moisture, carbonic acid gas, etc. from the air.

Durability is measured by the rate of resistance of glass to chemical corrosion. Corrosive amount of IWAKI brand

borosilicate glass against acid material and distilled water is extremely low, compared with other glasses.

Following figures show weight loss of IWAKI brand borosilicate glass.

a. Distilled water

Solubility of Alkali 0.06 ml

(100 0C, 1 hr, 300~500 particle test)

Weight loss of surface 0.001 mg/cm2 (100 0C, 6 hrs)

b. Moisture (Weight loss of surface mg/ cm2)

Exposing Time

HR 1/2

HR 1

HR 2

HR 3

HR 4

HR 6

HR 8

HR 12

121 0C (1.05 kg/ cm2) - 0.0075 - 0.0135 - - 0.019 0.022

224 0C (24.5 kg/ cm2) 0.043 0.076 0.124 - 0.176 0.202 - -

c. Acid, Alkali (Weight loss mg/cm2)

IWAKI brand borosilicate glass is inert to almost all materials with the exception of hydrofluoric acid, phosphoric acid

and hot strong caustic solutions. Hidrofluoric acid has the most serious effect. However, the rate of attack of alkaline

solution is not excessive, if not highly concentrated and the room temperature. The rate of attack increace as the

temperature exceeds 40 0C.

5 % HCI 24 hrs 100 0C

5 % NaOH 6 hrs 99 0C

N/50 Na2CO3

6 hrs 100 0C

0.0045 1.4 0.12

Figure 7, 8, 9, and 10 show rates for both speed

of corrosion by NaOH and fluoric acid, and

weight loss against alkali.



Figure 7. Corrosion by NaOH Solution

Figure 9. Durability vs Alkali

Figure 8. Corrosion by Fluroid Acid

Figure 10. Durability vs Alkali

Temperature (0C)

Concentration (%NaOH)Ph

Temperature (0C)

Spee

d of

Cor

rosio

n (m

m/y

ear)

Wei

ght l

oss (

mg/

cm2 /h

r)

Wei

ght l

oss (

mg/

cm2 /5

0 hr

s)

Spee

d of

Cor

rosio

n (m

m/y

ear)



Figure 11. Mechanical strength of internal pressure of

IWAKI brand borosilicate glass tubes

Outside Diameter of Tube (mm)

Mec

hani

cal S

tren

gth

of In

tern

al P

ress

ure

(kg/

cm2 )

9. Mechanical Strength of Internal Pressure

Mechanical strength of IWAKI brand borosilicate glass tubes in various diameters and thicknesses at

25 0C calculated from the following formula.

P : Mechanical strength of internal pressure (kg/cm2)

thδ : Design stress (67 kg/cm2)

(The factor of average stress of cutting direction against inner wall of glass tube is considered to be twice)

d : Inside diameter

D : Outside diameter

2

2

1 ( / ) .1 ( / )

d Dpd D

δ−=

+

2

2

1 ( / ) .1 ( / )

d Dpd D

δ−=

+



1. Testing of Volume (Conform to ISO 4787)

a. Unit Volume

The unit of volume shall be the cubic centimeter (cm3) for millilitre (ml), the cubic decimeter (dm3) for litre (l) and cubic millimeter (mm3) for microlitre (µl).

b. Reference Temperature

The standard temperature of volumetric laboratory ware is intended to contain or deliver its nominal volume (nominal capacity) shall be 20 0C. When it is necessary in tropical countries to work at an ambient temperature considerably above 20 0C, and these countries do not wish to use the standard reference temperature of 20 0C, it is recommended that they adopt a temperature of 27 0C.

c. Apparatus and Material

- Balance

A laboratory balance is required with sufficient capacity to weight the loaded vessel. The balance shall have discrimination not greater than 1/10 of the limits of error of the instrument to be tested. The balance shall have dimensions to accept the size of the vessels which need to be weighed.

- Thermometer

A thermometer is required to measure the temperature of the water. Its limit of error shall be 0.1 0C.

- Barometer

A barometer capable of providing atmospheric pressure measurement. The barometer should preferably have limits of error of 1 mbar (100 Pa).

- Water

Pure water, distilled or deionized water, suitable for general laboratory purposes, shall be used

Volumetric Glasswared. Factors affecting the accuracy

- Temperature of vessel

- Temperature of liquid

- Cleanliness of glass surface

e. Setting of the meniscus

Most items of volumetric glassware employ the principle

of setting or reading a meniscus (the interface between

air and the liquid the volume of which is being measured)

against a reference line or scale.

Eye position

Meniscus

Graduation Line

Eye parallel with meniscus

Eye

Eye

Eye not parallel with meniscus



f. Testing Procedure

General

The vessel to be tested shall be cleaned and kept

filled with pure water until shortly before required.

Vessel adjusted to contain (Type In) shall then be

dried, for example by rinsing with ethanol and using

a current of warm air.

Vessel adjusted to deliver (Type Ex) shall be

appropriately cleaned.

Temperature conditions

All test shall be carried out in a room, the

temperature of which is constant to at least 1 0C/h.

Tare

The vessel to be tested, or a weighing bottle if a

vessel intended for delivery is to be tested, shall be

appropriately weighed, i.e. to an accuracy better

than 10% of the tolerance laid down.

Filling

Type In (e.g. Volumetric Flasks and •

Graduated Cylinders).

The contained quantity of liquid correspond

exactly to the capacity indicated on the

instrument.

Type Ex (e.g. Pipettes and Burettes).•

The delivered quantity of liquid correspond

exactly to the capacity indicated on the

instrument.

Vessel adjusted to contain shall either be filled to a

distance of a few millimeters above the graduation

line to be tested. The final setting to the line shall be

made by withdrawing the surplus water by means

of a glass tube drawn down to a jet or, in the case of

pipettes adjusted to contain, by means of filter paper.

Vessel adjusted to deliver shall be clamped in a

vertical position and filled to a few millimeters above

the graduation line to be tested; any liquid remaining

on the outside of the jet shall be removed. The

setting shall then be made by running out the surplus

water through the jet.

Weighing

The filled vessel or weighing bottle shall be weighed

and the temperature of the water shall be measured

using a thermometer graduated and accurate

to 0.1 0C.

g. Calculation of volume

The general equation for calculation of the volume at the

reference temperature of 200C, V20, is as follows:

V (20 0C) = [IL - IE ] x [1/(ρw - ρA)] x [1 - (ρA/ρB)] x [1- γ (t- 20)] ....(1)

Where:

I• L is the balance reading of vessel with water,

in grams;

I• E is the balance reading of empty vessel, in grams;

ρ• A is the density of air, in grams per millilitre;

ρ• B is the density of the balance weights, in grams

per milliliter;

ρ• w is the density of water at t 0C, in grams per

milliliter;

γ • is the coefficient of cubical thermal expansion of

the material, in reciprocal degrees Celcius;

t• is the temperature of the water used in testing,

in degrees celcius



Volume ml

Graduation ml

Tolerance Class A ml

10 0.02 ± 0.02

10 0.05 ± 0.03

25 0.05 ± 0.03

25 0.10 ± 0.05

50 0.10 ± 0.05

100 0.20 ± 0.10

Volume ml

Graduation ml


0.1 0.01 ± 0.006

0.2 0.01 ± 0.006

0.5 0.01 ± 0.006

1 0.01 ± 0.007

2 0.02 ± 0.010

5 0.05 ± 0.030

10 0.1 ± 0.05

20 0.1 ± 0.1

25 0.1 ± 0.1

Volume ml


0.5 ± 0.005

1 ± 0.008

2 ± 0.01

5 ± 0.015

10 ± 0.02

20 ± 0.03

25 ± 0.03

50 ± 0.05

100 ± 0.08

200 ± 0.1

Volume ml


5 ± 0.05

10 ± 0.1

25 ± 0.25

50 ± 0.5

100 ± 0.5

250 ± 1

500 ± 2,5

1,000 ± 5

2,000 ± 10

Volume ml


5 ± 0.025

10 ± 0.025

20 ± 0.040

25 ± 0.040

50 ± 0.060

100 ± 0.100

200 ± 0.150

250 ± 0.150

500 ± 0.250

1,000 ± 0.400

2,000 ± 0.600

2. Volume Tolerance of Volumetric Ware

Burettes (Conform to ISO 385)

One Mark Pipettes (Conform to ISO 648)

Graduated Measuring Cylinder (Conform to ISO 4788)

Graduated Pipettes (Conform to ISO 835)

One Mark Volumetric Flask (Conform to ISO 1042)



3. Color Coding

Pipettes Color Coding (Conform to ISO 1769)

Volume ml

Graduation ml Color code bands

0.5 0.001 2 green

0.005 1 red

0.01 1 white

0.05 2 orange

0.2 0.001 2 blue

0.002 2 white

0.01 1 black

0.1 1 orange

0.5 0.005 1 green

0.01 2 yellow

0.02 2 red

0.05 2 black

0.25 2 green

1 0.01 1 yellow

0.05 2 green

0.1 1 red

2 0.01 2 white

0.02 1 black

0.05 2 orange

0.1 1 green

5 0.05 1 red

0.1 1 blue

10 0.1 1 orange

20 0.1 2 yellow

25 0.1 1 white

0.2 1 green

50 0.1 2 orange

0.2 1 black

Coding System for one-mark pipettes Coding System for graduated pipettes

Volume ml Color code bands

0.5 2 black

1 1 blue

2 1 orange

3 1 black

4 2 red

5 1 white

6 2 orange

7 2 green

8 1 blue

9 1 black

10 1 red

15 1 green

20 1 yellow

25 1 blue

30 1 black

40 1 white

50 1 red

100 1 yellow



4. Batch numbering

The batch number records the date of production and other parameters. If the batch number of the product is

known, the individual result at the date of production can be easily accessed anytime for traceability.

Batch number printed on each product of volumetric Ware : Measuring Pipet, Volumetric Pipet, Measuring Cylinder,

Volumetric Flask and Buret.

The readings :

Batch number : 17Z14

2 number with square (reading

start from the small number)

Letter with square

Number with triangle

1

7

Z

14

Define of Batch Certificate no.: code of month; code of week; code of year

Example:

For Measuring Cylinder:

For Volumetric Flask:

How to get Batch Certificate from IGI website?

Step:1. Please enter to our website www.iwakiglassindonesia.com2. Choose “Batch Certificate” Panel3. Login to batch certificate with User id and Password 4. Choose of product code and batch no.

PT IWAKI GLASS INDONESIAManufactured Laboratory Glassware

If some users have may specialized require or non standard

laboratory glassware, we pleased to offer service to

customers such as:

Repair•

Special order (Custom made glassware)•

Individual test certificate volume•

Pleased free to call PT Iwaki Glass Indonesia or

our authorized distributor.

Service




General Precautions

- Never drink from any laboratory product to avoid any possibility of personal injury of health hazard.

- Do wear appropriate protective clothing, eg: lab coats, face mask, gloves, etc when do any laboratory activity.

- Use chemical carefully. Glass will be attached by hydrofluoric acid, hot phosphoric acid and strong hot alkalis. So glass should never be used to contain or to process these materials.

- Do not use laboratory glassware that is etched, scratched, chipped and cracked. That is prone to breakage.

- Do not use stirring rods with sharp ends when stirring solutions in glass vessel to avoid scratch the glassware. Or use Teflon rods to prevent scratching the inside of vessel.

- Do not mix sulfuric acid with water inside a cylinder. The heat from the reaction can break the base of cylinder.

- Hold beakers, bottles, and flasks by the sides and bottoms rather than by the tops. The rims of beakers or necks of bottles and flask might break if used as lifting points. Be especially careful with multiple neck flask.

- To avoid breakage while clamping glassware, use coated clamps to prevent glass to metal contact, and do not use excessive force to tighten clamps.

Heating and Cooling

- Do not put hot glassware on cold or wet surface, or cold glassware on hot surface. It may break with temperature change.

- Do not heat glassware that is etched, cracked, nicked or scratched. Such defect reduce the thermal strength, making the glassware more prone to breakage.

- Do heat vessels gently and gradually to avoid breakage by thermal shock.

- Glassware with thick walls such as bottles and jars should not be heated over a direct flame or comparable heat source.

- Be sure to check laboratory and instruction manuals when working with heat source.

- Always use a hot plate larger than the vessels being heated.

- Adjust bunsen burner to get large soft flame. It will heat slowly and more uniformly and use a wire gauze with ceramic centre to diffuse the flame.

Care and Maintenance




Cleaning

- Wash laboratory glassware as soon as possible after use to avoid hard residues or it may become impossible to remove the material remain. Use biodegradable, phosphate free detergent for laboratory use.

- All glassware must be absolutely grease free. The safest criteria of cleanliness is uniform wetting of the surface by distilled water.

- For precision chemical tests, new glassware should be soaked several hours in acid water (1% solution of hydrochloric acid or nitric acid) before washing.

- Glassware which contaminated with blood clots, must be sterilized before cleaning. It can best be processed in the laboratory by placing it in a large bucket or boiler filled with water, to which 1-2% soft soap or detergent has been added, and boiled for 30 minutes. The glassware can then be rinsed in tap water, scrubbed with detergent, rinsed again.

- Glassware which become unduly clouded or dirty or contains coagulated organic matter, it must be cleansed with chromic acid cleaning solution. The dichromate should be handled with extreme care because a powerful corrosive.

Handling and Storing

- To prevent the breakage when rinsing or washing pipettes, burettes or cylinder, not to let tips hit the sink or the water tap.

- Protect glassware from the dust by plugging with cotton, corking, taping a heavy piece of paper over the mouth or placing the glassware in a dust free cabinets.

- Dry glassware by hanging on wooden pegs or placing in baskets with their mouth downward and allowing them to dry in an oven with temperature should not exceed 140 0C.

- Store glassware in specially designed racks. Avoid breakage by keeping pieces separated.

Volumetric Glassware

- To ensure that all volumetric glassware is kept scrupulously clean and grease free. Dirty and grease can affect to the meniscus which influence to accuracy result.

- Do not draw any liquids into a pipette by mouth. Always use a purposed designed pipette filler.

- Do not use pipette or burette with chipped or damaged jets. The delivery times may be affected which influence to accuracy result.

- Volumetric glassware should be held in a vertical position when reading the meniscus. The meniscus should be the eye level to avoid parallax errors.

- Do not apply direct heat to any volumetric glassware.

- Autoclaving at 121 0C and cleaning in automatic dishwaser is acceptable and will not affect the accuracy.

Vacuum and Pressure Warning

Because of variation in condition, PT. Iwaki Glass Indonesia can not guarantee any glassware against breakage under vacuum or pressure. Adequate precautions should be taken to protect personnel from doing such work.




Product


BEAKEr & FLASK


Beaker & Flask


PrODUCT

Code No.

Specifications

Pcs/CaseCap’ty (ml)

ØD Body (mm)

Height (mm)

1000BK10 10 30 40 10*

1000BK20 20 34 45 10*

1000BK30 30 38 53 144

1000BK50 50 46 60 144

1000BK100 100 55 70 72

1000-150 150 55 81 60

1000BK200 200 67 89 72

1000BK250 250 70 97 60

Code No.

Specifications


ØD Body (mm)

Height (mm)

1060BK50 50 40 70 90

1060BK100 100 50 88 70

1060BK200 200 60 115 40

1060BK300 300 67 135 40

1060BK500 500 80 155 56

1060BK1000 1,000 95 200 24

BEAKErLow Form

BEAKErTall Form

(*) Inner box


BEAKEr & FLASK

Code No.

Specifications


ØD Body (mm)

Height (mm)

1080BK50 50 49 70 60

Code No.

Specifications


ØD Body (mm)

Height (mm)

ØD Neck (mm)

4282FK50 50 53 105 25 10

4282FK100 100 65 120 25 10

4282FK200 200 81 150 34 1

4282FK300 300 93 170 34 1

4282FK500 500 109 200 34 1

4282FK1000 1,000 137 250 40 1

BEAKErConical From

BOILInG FLASKRound Bottom


PrODUCT

Code No.

Specifications


ØD Body (mm)

Height (mm)

ØD Neck (mm)

4062FK50 50 53 100 25 10

4062FK100 100 65 126 25 10

4062FK200 200 80 145 34 1

4062FK300 300 93 165 34 1

4062FK500 500 108 195 34 1

4062FK1000 1,000 135 240 40 1

Code No.

Specifications


ØD Body (mm)

Height (mm)

ØD Neck (mm)

4280FK50 50 53 105 20 10

4280FK100 100 65 126 20 10

4280FK200 200 81 155 25 1

4280FK300 300 94 180 28 1

4280FK500 500 109 210 28 1

4280FK1000 1,000 137 260 35 1

BOILInG FLASKFlat Bottom

BOILInG FLASKRound Bottom Narrow Neck


BEAKEr & FLASK

Code No.

Specifications


ØD Body (mm)

Height (mm)

ØD Neck (mm)

4060FK50 50 53 105 20 10

4060FK100 100 65 126 20 10

4060FK200 200 80 155 25 1

4060FK300 300 93 180 28 1

4060FK500 500 108 210 28 1

4060FK1000 1,000 135 260 35 1

Code No.

Specifications


ØD Body (mm)

Height (mm)

ØD Neck (mm) TS Size

4320FK100-19 100 65 115 25 19/26 10

4320FK200-29 200 81 140 34 29/32 1

4320FK300-29 300 93 150 34 29/32 1

4320FK500-29 500 109 175 34 29/32 1

4320FK1000-34 1,000 137 200 40 34/35 1

4320FK2000-34 2,000 170 260 40 34/35 1

BOILInG FLASKFlat Bottom Narrow Neck

BOILInG FLASKRound Bottom with TS Joint


PrODUCT

Code No.

Specifications


ØD Body (mm)

Height (mm)

TS Joint

Center Side

4323FK100-19 100 65 115 19/26 14/23 1

4323FK200-29 200 81 140 29/32 24/29 1

4323FK300-29 300 93 150 29/32 24/29 1

4323FK500-29 500 109 175 29/32 24/29 1

4323FK1000-34 1,000 137 200 34/35 24/29 1

Code No.

Specifications


ØD Body (mm)

Height (mm)

TS Joint

Center Side

4965FK100-19 100 65 115 19/26 14/23 1

4965FK200-29 200 81 140 29/32 24/29 1

4965FK300-29 300 93 150 29/32 24/29 1

4965FK500-29 500 109 175 29/32 24/29 1

4965FK1000-34 1,000 137 200 34/35 24/29 1


with TS Joint, 2 Neck




BEAKEr & FLASK

Code No.

SpecificationsPcs/CaseCap’ty

(ml)ØD Body

(mm)Height (mm)

TS Joint

Center Side

4061FK100-19-2N 100 65 110 19/26 14/23 1

4061FK200-29-2N 200 80 135 29/32 24/29 1

4061FK300-29-2N 300 93 145 29/32 24/29 1

4061FK500-29-2N 500 108 170 29/32 24/29 1

4061FK1000-34-2N 1,000 135 190 34/35 24/29 1

Code No.

Specifications


ØD Body (mm)

ØD Neck (mm)

Height (mm)

TS Size

4061FK100-19 100 65 110 25 19/26 10

4061FK200-29 200 80 135 34 29/32 1

4061FK300-29 300 93 145 34 29/32 1

4061FK500-29 500 108 170 34 29/32 1

4061FK1000-34 1,000 135 190 40 34/35 1

4061FK2000-34 2,000 170 245 40 34/35 1

BOILInG FLASKFlat Bottom with TS Joint

BOILInG FLASKFlat Bottom with TS Joint, 2 Neck


PrODUCT

Code No.

Specifications


ØD Body (mm)

ØD Neck (mm)

Height (mm)

4980FK10 10 32 19 59 10

4980FK20 20 37 22 60 10

4980FK25 25 42 22 70 10

4980FK30 30 44 22 67 10

4980FK50 50 52 22 82 10

4980FK100 100 65 28 110 72

4980FK200 200 81 31 131 48

4980-250N 250 85 32 138 60

4980FK300 300 91 31 150 24

4980FK500 500 108 37 173 24

4980FK1000 1,000 133 45 215 6

ERLENMEyER FLASK

Code No.


(ml)ØD Body

(mm)Height (mm)

TS Joint

Center Side

4061FK100-19-3N 100 65 110 19/26 14/23 1

4061FK200-29-3N 200 80 135 29/32 24/29 1

4061FK300-29-3N 300 93 145 29/32 24/29 1

4061FK500-29-3N 500 109 170 29/32 24/29 1

4061FK1000-34-3N 1,000 135 190 34/35 24/29 1

BOILInG FLASKFlat Bottom



BEAKEr & FLASK

Code No.

Specifications

Pcs/CaseCap’ty (ml) TS Size OD

(mm)Lenght (mm)

5021FK50-19 50 19/28 52 88 10*

5021FK100-24 100 24/30 65 112 10*

5021FK200-29 200 29/32 81 130 2

5021FK250-28 250 29/32 85 135 2

5021FK300-29 300 29/32 91 145 2

5021FK500-34 500 34/35 108 167 2

5021FK1000-34 1,000 34/35 133 204 2

ERLENMEyER FLASK

with Glass Stopper (ISO, K-6 Standard)

(*) JIS standard

Code No.

Specifications


(mm)Lenght (mm)

5021FK50-19-B 50 19/28 52 88 10*

5021FK100-24-B 100 24/30 65 112 10*

5021FK250-29-B 250 29/32 85 135 2

5021FK500-34-B 500 34/35 108 167 2

5021FK1000-34-B 1,000 34/35 133 204 2

ERLENMEyER FLASK

with TS Joint without Glass Stopper (ISO, K-6 Standard)

(*) JIS standard


PrODUCT

Code No.

Specifications


(mm)Lenght (mm)

5020FK10 10 13 32 48 10

5020FK20 20 16 37 55 10

5020FK30 30 16 44 63 10

5020FK50 50 22 52 73 10

5020FK100 100 22 65 103 10

5020FK200 200 27 81 120 2

5020FK300 300 27 91 135 2

5020FK500 500 27 108 166 2

5020FK1000 1,000 38 133 200 2

5020FK2000R 2,000 38 172 268 2

ERLENMEyER FLASK

with Glass Stopper (JIS Standard)

Code No.

Specifications


(mm)Lenght (mm)

5020FK-BONLY30 30 16 44 63 10

5020FK-BONLY50 50 22 52 73 10

5020FK-BONLY100 100 22 65 103 10

5020FK-BONLY200 200 27 81 120 2

5020FK-BONLY300 300 27 91 135 2

5020FK-BONLY500 500 27 108 165 2

5020FK-BONLY1000 1,000 38 133 200 2

5020FK-BONLY2000R 2,000 38 172 268 2

ERLENMEyER FLASK

with TS Joint without Glass Stopper (JIS Standard)


BEAKEr & FLASK

ErLEnMEyEr FLASKwith Screw Cap

Code No.

Specifications

Pcs/CaseCap’ty (ml) CAP Size

4985FK10-18 10 GCMI 415-18 10*

4985FK20-18 20 GCMI 415-18 10*

4985FK30-24 30 GCMI 410-24 10*

4985FK50-24 50 GCMI 410-24 10

4985FK100-28 100 GCMI 410-28 10

4985FK250-33 250 GCMI 430-33 2

4985FK500-33 500 GCMI 430-33 2

4985FK1000-38 1,000 GCMI 430-38 2

(*) 10 ml, 20 ml, and 30 ml - No Graduation

Code No.

Specifications

Pcs/CaseCap’ty (ml) TS Size

5400FK100 100 24/29 2

5400FK250 250 24/29 2

5400FK500 500 29/32 2

IODInE FLASKwith Stopper


PrODUCT

Code No.

Specifications


ØD Body (mm)

Height (mm)

ØD Neck (mm)

4620FK100 100 65 150 25 1

4620FK200 200 81 200 34 1

4620FK300 300 93 220 34 1

4620FK500 500 109 250 34 1

4620FK1000 1,000 137 300 40 1

DISTILLING FLASK

Code No.

Specifications


ØD Body (mm)

ØD Neck (mm)

Height (mm)

5420FK50 50 50 20 180 2

5420FK100 100 63 20 225 2

5420FK200 200 77 25 290 2

5420FK300 300 86 28 330 2

5420FK500 500 101 30 370 2

5420FK1000 1,000 132 35 420 2

KjEDHAL FLAS


BEAKEr & FLASK

Code No.

Specifications


ØD Body (mm)

ØD Neck (mm)

Height (mm)

NASU-FK100 100 63 25 120 10

NASU-FK200 200 77 31 150 1

NASU-FK300 300 86 34 180 1

NASU-FK500 500 101 38 205 1

NASU-FK1000 1,000 132 43 255 1

nASU FLASK

Code No.

Specifications


ØD Body (mm) TS Size Height

(mm)

NASUGI-FK200-29 200 76 29/32 135 1

NASUGI-FK300-29 300 85 29/32 160 1

NASUGI-FK500-29 500 100 34/35 185 1

NASUGI-FK1000-29 1,000 133 34/35 235 1

nASU FLASKwith TS Joint


PrODUCT

Volumetric Ware


VOLUMETrIC WARE

Code No.

Specifications

TS Size Pcs/CaseCap’ty (ml)

Grad (mm)

Tol. ISO (mm)

Height (mm)

2982-10G-N 10 0.2 ± 0.1 137 9 10

2982-25G-N 25 0.5 ± 0.25 180 13 10

2982-50G-N 50 1 ± 0.5 230 16 10

2982-100G-N 100 1 ± 0.5 250 19 10

2982-250G-N 250 2 ± 1.0 330 22 2

2982-500G-N 500 5 ± 2.5 390 27 2

2982-1000G-N 1,000 10 ± 5.0 450 38 2

Code No.

Specifications


Grad (mm)

Tol. ISO (mm)

Height (mm)

3022-5-N 5 0.1 ± 0.05 125 10

3022-10-N 10 0.2 ± 0.1 137 10

3022-25-N 25 0.5 ± 0.25 167 10

3022-50-N 50 1 ± 0.5 200 10

3022-100-N 100 1 ± 0.5 250 10

3022-250-N 250 2 ± 1.0 305 2

3022-500-N 500 5 ± 2.5 360 2

3022-1000-N 1,000 10 ± 5.0 420 2

3022-2000-N 2,000 20 ± 10.0 485 2

MEASUrInG CyLINDER

Class A, Amber Graduation

MEASUrInG CyLINDER

with Glass Stopper Class A, Amber Graduation


PrODUCT

MEASUrInG CyLINDER

with Plastic Stopper Class A, Amber Graduation

Code No.

Specifications


Grad (mm)

Tol. ISO (mm)

Height (mm)

2982-10-N 10 0.2 ± 0.1 137 9 10

2982-25-N 25 0.5 ± 0.25 180 13 10

2982-50-N 50 1 ± 0.5 230 16 10

2982-100-N 100 1 ± 0.5 250 19 10

2982-250-N 250 2 ± 1.0 330 22 2

2982-500-N 500 5 ± 2.5 390 27 2

VOLUMETrIC FLASK

with Plastic Stopper

Code No.


(ml)Tol. ISO (mm)

Height (mm) TS Size

5645-5 5 ± 0.025 70 9 10

5645-10 10 ± 0.025 90 9 10

5645-20 20 ± 0.04 110 9 10

5645-25 25 ± 0.04 120 9 10

5645-50 50 ± 0.06 150 13 10

5645-100 100 ± 0.10 180 13 10

5645-200 200 ± 0.15 224 16 2

5645-250 250 ± 0.15 231 16 2

5645-500 500 ± 0.25 280 19 2

5645-1000 1,000 ± 0.40 325 22 2

5645-2000 2,000 ± 0.60 400 27 2


VOLUMETrIC WARE

Code No.

Specifications


Tol. ISO (mm)

Height (mm) TS Size

55645-5 5 ± 0.025 70 9 10

55645-10 10 ± 0.025 90 9 10

55645-20 20 ± 0.04 110 9 10

55645-25 25 ± 0.04 120 9 10

55645-50 50 ± 0.06 150 13 10

55645-100 100 ± 0.10 180 13 10

55645-200 200 ± 0.15 224 16 2

55645-250 250 ± 0.15 231 16 2

55645-500 500 ± 0.25 280 19 2

55645-1000 1,000 ± 0.40 325 22 2

55645-2000 2,000 ± 0.60 400 27 2

Code No.

Specifications


Tol. ISO (mm)

Height (mm) TS Size

5640-5 5 ± 0.025 70 9 10

5640-10 10 ± 0.025 90 9 10

5640-20 20 ± 0.04 110 9 10

5640-25 25 ± 0.04 120 9 10

5640-50 50 ± 0.06 150 13 10

5640-100 100 ± 0.10 180 13 10

5640-200 200 ± 0.15 224 16 2

5640-250 250 ± 0.15 231 16 2

5640-500 500 ± 0.25 280 19 2

5640-1000 1,000 ± 0.40 325 22 2

5640-2000 2,000 ± 0.60 400 27 2

VOLUMETrIC FLASK

with Plastic Stopper, Coating Amber

VOLUMETrIC FLASK

with Glass Stopper


PrODUCT

VOLUMETrIC FLASK

with Glass Stopper Coating Amber

Code No.

Specifications


Tol. ISO (mm)

Height (mm) TS Size

55640-5 5 ± 0.025 70 9 10

55640-10 10 ± 0.025 90 9 10

55640-20 20 ± 0.04 110 9 10

55640-25 25 ± 0.04 120 9 10

55640-50 50 ± 0.06 150 13 10

55640-100 100 ± 0.10 180 13 10

55640-200 200 ± 0.15 224 16 2

55640-250 250 ± 0.15 231 16 2

55640-500 500 ± 0.25 280 19 2

55640-1000 1,000 ± 0.40 325 22 2

55640-2000 2,000 ± 0.60 400 27 2


VOLUMETrIC WARE

MEASUrInG PIPETTEMohr Type

Code No.


(ml)Grad (ml)

Tol. ISO (mm)

Length (mm) Color Code

7000-0.1 0.1 0.001 ± 0.001 350 - 10

7000-0.2-C 0.2 0.002 ± 0.002 360 2 white 10

7000-0.5-C 0.5 0.005 ± 0.005 360 1 green 10

7000-1-C 1 0.01 ± 0.006 360 1 yellow 10

7000-2-C 2 0.02 ± 0.01 360 1 black 10

7000-5-C 5 0.05 ± 0.03 360 1 red 10

7000-10-C 10 0.1 ± 0.05 360 1 orange 10

7000-20-C 20 0.1 ± 0.1 435 2 yellow 10

7000-25-C 25 0.1 ± 0.1 450 1 white 10

7000-50-C 50 0.2 ± 0.2 455 1 black 10

Note: for 0.1 ml without Color Code


PrODUCT

VOLUMETrIC PIPPETE

Serological Type

Code No.


(ml)Grad (ml)

Tol. ISO (mm)

Length (mm) Color Code

7025-0.1 0.1 0.001 ± 0.001 350 - 10

7025-0.2-C 0.2 0.002 ± 0.002 360 2 white 10

7025-0.5-C 0.5 0.005 ± 0.005 360 1 green 10

7025-1-C 1 0.01 ± 0.006 360 1 yellow 10

7025-2-C 2 0.02 ± 0.01 360 1 black 10

7025-5-C 5 0.05 ± 0.03 360 1 red 10

7025-10-C 10 0.1 ± 0.05 360 1 orange 10

7025-20-C 20 0.1 ± 0.1 435 2 yellow 10

7025-25-C 25 0.1 ± 0.1 450 1 white 10

7025-50-C 50 0.2 ± 0.2 455 1 black 10

Note: for 0.1 ml without Color Code


VOLUMETrIC WARE

VOLUMETrIC PIPPETE

Class A, Amber Graduation

Code No.

Specifications

Pcs/CaseCap’ty

(ml)Tol. ISO (mm)

Length (mm)

Color Code

7100-0.5-C 0.5 ± 0.005 300 2 black 10

7100-1-C 1 ± 0.008 325 1 blue 10

7100-2-C 2 ± 0.01 350 1 orange 10

7100-3-C 3 ± 0.015 350 1 black 10

7100-4-C 4 ± 0.015 380 2 red 10

7100-5-C 5 ± 0.015 380 1 white 10

7100-6-C 6 ± 0.02 380 2 orange 10

7100-7-C 7 ± 0.02 410 2 green 10

7100-8-C 8 ± 0.02 410 1 blue 10

7100-9-C 9 ± 0.02 410 1 black 10

7100-10-C 10 ± 0.02 440 1 red 10

7100-15-C 15 ± 0.03 450 1 green 10

7100-20-C 20 ± 0.03 510 1 yellow 10

7100-25-C 25 ± 0.03 525 1 blue 10

7100-30-C 30 ± 0.05 480 1 black 10

7100-40-C 40 ± 0.05 510 1 white 10

7100-50-C 50 ± 0.05 545 1 red 10

7100-100-C 100 ± 0.08 595 1 yellow 1


PrODUCT

KOMAGAME PIPETTE

BUrETTEGlass Stopcock, Clear

Amber Graduation

Code No.

Specifications


Length (mm)

K-Pipet1 1 240 10

K-Pipet2 2 245 10

K-Pipet3 3 260 10

K-Pipet5 5 275 10

K-Pipet10 10 340 10

K-Pipet20 20 340 10

Code No.

Specifications


Tol. ISO (mm)

Length (mm)

BURET10S 10 ± 0.02 580 1

BURET25S 25 ± 0.05 650 1

BURET50S 50 ± 0.05 850 1

BURET100S 100 ± 0.1 865 1


VOLUMETrIC WARE

BUrETTEGlass Stopcock, Coating Amber

White Graduation

BUrETTETeflon Stopcock, Clear,

Amber Graduation

Code No.

Specifications


Tol. ISO (mm)

Length (mm)

B-BURET10S 10 ± 0.02 580 1

B-BURET25S 25 ± 0.05 650 1

B-BURET50S 50 ± 0.05 850 1

B-BURET100S 100 ± 0.1 865 1

Code No.

Specifications


Tol. ISO (mm)

Length (mm)

2103BURET10S 10 ± 0.02 570 1

2103BURET25S 25 ± 0.05 640 1

2103BURET50S 50 ± 0.05 840 1

BUrETTETeflon Stopcock, Coating Amber

white Graduation

Code No.

Specifications


Tol. ISO (mm)

Length (mm)

B-2103BURET10S 10 ± 0.02 570 1

B-2103BURET25S 25 ± 0.05 640 1

B-2103BURET50S 50 ± 0.05 840 1


PrODUCT

PyKNOMETER GAy-LUSSAC TyPE

Uncalibrated

Code No.

Specifications


Tol. ISO (mm)

Stopper TS Size

PICNO-M5 5 ± 0.5 10/19 10

PICNO-M10 10 ± 1 10/19 10

PICNO-M25 25 ± 2 10/19 10

PICNO-M50 50 ± 3 10/19 10

PICNO-M100 100 ± 3 10/19 10

PyKNOMETER GAy-LUSSAC TyPE

Calibrated

Code No.

Specifications


Stopper TS Size

PICNO-M5-C 5 10/19 1

PICNO-M10-C 10 10/19 1

PICNO-M25-C 25 10/19 1

PICNO-M50-C 50 10/19 1

PICNO-M100-C 100 10/19 1

Note: Individual certificate included


VOLUMETrIC WARE

BABCOCKMilk Test Bottle

Code No.

Specifications

Pcs/CaseØD Body (mm)

ØD Neck (mm)

Height (mm)

Grad (± ml)

BTL-BAB-M-N 8% 36 8 165 0.02 2

Note: Individual certificate included

BABCOCKCream Test Bottle

Code No.

Specifications


ØD Neck (mm)

Height (mm)

Grad (± ml)

BTL-BAB-C-N 50% 36 12 165 0.05 2


PrODUCT

nESSLEr TUBEwith Spout White Graduation

Code No.

Specifications


Grad (mm)

ØD (mm)

Length (mm)

NESSLER50 50 50 26 150 10

NESSLER100 100 50 & 100 35 180 10

nESSLEr TUBEwith Spout Amber Graduation

Code No.

Specifications


Grad (mm)

ØD (mm)

Length (mm)

NESSLER50S 50 50 26 150 10

NESSLER100S 100 50 & 100 35 180 10


VOLUMETrIC WARE

TUBE COLOr COMPARISON

with Glass Stopper, White Graduation

Code No.


(ml)Grad (mm)

ØD (mm)

Length (mm) TS Size

COLOR-TUBE25 25 1 18 180 15/25 10

COLOR-TUBE50 50 5 23.9 200 19/22 10

COLOR-TUBE50-250 50 5 23.9 250 19/22 10

COLOR-TUBE100 100 10 29.2 250 24/25 10

COLOR-TUBE100L 100 10. 25. 50. 100 23.6 370 19/22 10

TUBE COLOr COMPARISON

with Glass Stopper, Amber Graduation

Code No.


(ml)Grad (mm)

ØD (mm)

Length (mm) TS Size

COLOR-TUBE25S 25 1 18 180 15/25 10

COLOR-TUBE50S 50 5 23.9 200 19/22 10

COLOR-TUBE50-250S 50 5 23.9 250 19/22 10

COLOR-TUBE100S 100 10 29.2 250 24/25 10


PrODUCT

CEnTrIFUGE


CEnTrIFUGE

COnICAL BOTTOMwith Rim

COnICAL BOTTOMwith Rim with Graduation

Code No.

Specifications


ØD (ml)

Length (mm)

8060CTF10 10 16.5 105 10

8060CTF15 15 16.5 115 10

Code No.

Specifications


ØD (ml)

Length (mm)

Grad (ml)

8080CTF10 10 16.5 105 0.2 10

8080CTF15 15 16.5 115 0.2 10


PrODUCT

COnICAL BOTTOMwith Glass Stopper

COnICAL BOTTOMwith Glass Stopper,

with Graduation

Code No.

Specifications


ØD (ml)

Length (mm) TS Size

8064CTF10 10 16.5 100 14/10 10

Code No.

Specifications


ØD (ml)

Length (mm)

Grad (ml) TS Size

8084CTF10 10 16.5 100 0.2 14/10 10


CEnTrIFUGE

COnICAL BOTTOMwith Screw Cap

COnICAL BOTTOMwith Screw Cap, with Graduation

Code No.

Specifications


ØD x Length (mm) Cap Size

8062CTF10 10 16.5 x 105 GMCI 1415-15 10

Code No.


(ml)ØD x Length

(mm)Grad (ml)

Tol. (ml) Cap Size

8082CTF10 10 16.5 x 105 0.2 ± 0.2 GMCI 1415-15 10


PrODUCT

rOUnD BOTTOMwith Screw Cap, with Graduation

rOUnD BOTTOMheavy Duty

Code No.


(ml)ØD x Length

(mm)Grad (ml)

Tol. (ml) Cap Size

8482CTF10 10 16.5 x 105 0.2 ± 0.2 GMCI 1415-15 10

Code No.

Specifications


ØD (ml)

Wall Thick.(mm)

Length (mm)

8540CTF50 50 35 2.4 100 10

8540CTF100 100 45 2.4 120 10


CEnTrIFUGE

rOUnD BOTTOMwith Glass Stopper

rOUnD BOTTOMwith Glass Stopper,

with Graduation

Code No.

Specifications


ØD (ml)

Length (mm)

Grad (ml)

Stopper TS Size

8484CTF10 10 16.5 100 0.2 14/10 10

8484CTF50 50 35 96 1.0 24/12 10

Code No.

Specifications


ØD (ml)

Length (mm) TS Size

8424CTF10 10 16.5 100 14/10 10

8424CTF50 50 35 96 24/12 10


PrODUCT

ASTMPear Shape

ASTMCylindrical Shape

Code No.

Specifications


ØD (ml)

Length (mm)

8200-100 100 58 158 1

Code No.

Specifications


ØD (ml)

Length (mm)

8160-100 100 38 200 1

Graduation: From 0 to 1.5 ml : 0.1 ml From 1.5 to 5 ml : 0.5 ml From 5 to 10 ml : 1 ml From 10 to 25 ml : 5 ml And at 50 ml and 100 ml

Graduation: From 0 to 0.5 ml : 0.05 ml From 0.5 to 2 ml : 0.1 ml From 2 to 3 ml : 0.2 ml From 3 to 5 ml : 0.5 ml From 5 to 10 ml : 1 ml From 10 to 25 ml : 5 ml From 25 to 100 ml : 25 ml


CONDENSER

CONDENSER


PrODUCT

Code No.

SpecificationsPcs/CaseJacket Length

(mm)ØD Jacket

(mm)Total Length

(mm)

2340-200 200 25 380 1

2340-300 300 30 500 1

2340-400 400 35 620 1

2340-500 500 40 740 1

2340-600 600 50 860 1

Code No.


(mm)ØD Jacket

(mm)Total Length

(mm)Upper &

Lower

2400-200-24 200 25 316 24/29 1

2400-300-29 300 30 424 29/32 1

2340-400-29 400 35 524 29/32 1

2400-500-29 500 40 624 29/32 1

2400-600-29 600 50 724 29/32 1

LIEBIG

LIEBIGDrip Tip TS Joint


CONDENSER

ALLIHN

ALLIHNDrip Tip TS Joint

Code No.

Specifications

Pcs/CaseJacket Length (mm)

ØD Jacket (mm)

Total Length (mm)

2420-200 200 25 390 1

2420-300 300 35 500 1

2420-400 400 40 620 1

2420-500 500 45 740 1

Code No.


(mm)ØD Jacket

(mm)Total Length

(mm)Upper &

Lower

2480-200-24 200 30 316 24/29 1

2480-300-29 300 35 424 29/32 1

2480-400-29 400 40 524 29/32 1

2480-500-29 500 45 624 29/32 1


PrODUCT

GRAHAM

GRAHAMDrip Tip TS Joint

Code No.

Specifications


ØD Jacket (mm)

Total Length (mm)

2500-200 200 30 380 1

2500-300 300 35 500 1

2500-400 400 40 620 1

2500-500 500 45 740 1

Code No.


(mm)ØD Jacket

(mm)Total Length

(mm)Upper &

Lower

2560-200-24 200 30 316 24/29 1

2560-300-29 300 35 424 29/32 1

2560-400-29 400 40 524 29/32 1

2560-500-29 500 45 624 29/32 1


CONDENSER

DIMROTH

DIMROTHDrip Tip TS Joint

Code No.

Specifications


ØD Jacket (mm)

Total Length (mm)

2565-200 200 30 380 1

2565-300 300 35 500 1

2565-400 400 45 620 1

2565-500 500 48 740 1

Code No.


(mm)ØD Jacket

(mm)Total Length

(mm)Upper &

Lower

2570-200-24 200 30 316 24/29 1

2570-300-29 300 35 424 29/32 1

2570-400-29 400 45 524 29/32 1

2570-500-29 500 48 624 29/32 1


PrODUCT

FUnnEL & COLUMN


FUnnEL & COLUMN

SEPARATING FUnnEL

with Glass Stopcock

SEPARATING FUnnEL

with Teflon Stopcock

Code No.

Specifications


Stopcock Size

TS SizeNS Bore

6401FS50 50 12.5 2.5 19/26 2

6401FS100 100 12.5 2.5 24/29 2

6401FS250 250 14.5 2.5 29/32 2

6401FS500 500 14.5 2.5 29/32 2

6401FS1000 1,000 18.8 4 29/32 2

6401FS2000 2,000 18.8 4 29/32 1

Code No.

Specifications


Stopcock Size

TS SizeNS Bore

6403FS50 50 12.5 2.5 19/26 2

6403FS100 100 12.5 2.5 24/29 2

6403FS250 250 14.5 2.5 29/32 2

6403FS500 500 14.5 2.5 29/32 2

6403FS1000 1,000 18.8 4 29/32 2

6403FS2000 2,000 18.8 4 29/32 1


PrODUCT

DROPPING FUnnEL

with Glass Stopcock

DROPPING FUnnEL


Code No.

Specifications


Stopcock Size

TS SizeNS Bore

6380FS50 50 12.5 2.5 19/26 2

6380FS100 100 12.5 2.5 19/26 2

6380FS250 250 14.5 2.5 24/29 2

6380FS500 500 14.5 2.5 29/32 2

Code No.

Specifications


Stopcock Size

TS SizeNS Bore

6383FS50 50 12.5 2.5 19/26 2

6383FS100 100 12.5 2.5 19/26 2

6383FS250 250 14.5 2.5 24/29 2

6383FS500 500 14.5 2.5 29/32 2


FUnnEL & COLUMN

COLUMn CHROMATOGRAPHy

with Glass Stopcock

COLUMn CHROMATOGRAPHy


Code No.

Specifications

Pcs/CaseID (mm)

Length (mm)

Stopcock Size

NS Bore

2156-10 10 300 12.5 2.5 1

2156-12 12 300 12.5 2.5 1

2156-15 15 300 12.5 2.5 1

2156-20 20 300 12.5 2.5 1

Code No.

Specifications

Pcs/CaseID (mm)

Length (mm)

Stopcock Size

NS Bore

2146-10 10 300 12.5 2.5 1

2146-12 12 300 12.5 2.5 1

2146-15 15 300 12.5 2.5 1

2146-20 20 300 12.5 2.5 1


PrODUCT

COLUMn CHROMATOGRAPHywith Glass Stopcock, with TS Joint

COLUMn CHROMATOGRAPHywith Teflon Stopcock, with TS Joint

Code No.

Specifications

Pcs/CaseID (mm)

Length (mm)

TS Size

Stopcock Size

NS Bore

2157-10-14 10 300 14/23 12.5 2.5 1

2157-12-14 12 300 14/23 12.5 2.5 1

2157-15-14 15 300 14/23 12.5 2.5 1

2157-15-19 15 300 19/26 12.5 2.5 1

2157-20-19 20 300 19/26 12.5 2.5 1

Code No.

Specifications

Pcs/CaseID (mm)

Length (mm)

TS Size

Stopcock Size

NS Bore

2147-10-14 10 300 14/23 12.5 2.5 1

2147-12-14 12 300 14/23 12.5 2.5 1

2147-15-14 15 300 14/23 12.5 2.5 1

2147-15-19 15 300 19/26 12.5 2.5 1

2147-20-14 20 300 14/23 12.5 2.5 1

2147-20-19 20 300 19/26 12.5 2.5 1


PLANT CULTURE

PLANT CULTURE


PrODUCT

CULTUrE TUBEFlat Bottom without Rim,

without Brand

CULTUrE FLASKWithout Rim, with Graduation

Code No.

Specifications


Height (mm)

Wall Thick (mm)

9820TST-F25-100 25 100 1.2 100

9820TST-F25-120 25 120 1.2 100

9820TST-F25-150 25 150 1.2 100

9820TST-F30-120 30 120 1.5 100

Code No.

Specifications


ØD Body (mm)

Height (mm)

ØD Neck (mm)

4442FK100 100 65 125 25 12

4442FK200 200 81 146 38 2

4442FK250 250 85 150 38 2

4442FK300 300 91 165 38 2

4442FK500 500 108 188 38 2


TUBES & DISh

TUBES & DISh


PrODUCT

TEST TUBEwith Rim

Code No.

SpecificationsApprox

Vol. Pcs/CaseØD (mm)

Length (mm)

Wall Thick (mm)

TEST10-75NP 10 75 1.0 3 2,000

TEST12-75NP 12 75 1.1 4 2,000

TEST12-90NP 12 90 1.1 5 2,000

TEST12-105NP 12 105 1.1 6 2,000

TEST12NP 12 120 1.1 7 2,000

TEST13-75NP 13 75 1.2 5 2,000

TEST13-90NP 13 90 1.2 6 2,000

TEST13-100NP 13 100 1.2 7 1,000

TEST15-85NP 15 85 1.2 8 1,000

TEST15-105NP 15 105 1.2 10 1,000

TEST15NP 15 150 1.2 15 1,000

TEST16-100NP 16 100 1.2 12 1,000

TEST16-125NP 16 125 1.2 14 1,000

TEST16-150NP 16 150 1.2 17 1,000

TEST16.5-105NP 16.5 105 1.2 13 1,000

TEST16.5NP 16.5 165 1.2 20 1,000

TEST18-150NP 18 150 1.2 23 500

TEST18-165NP 18 165 1.2 25 500

TEST18NP 18 180 1.2 27 500

TEST20-150NP 20 150 1.2 29 500

TEST21NP 21 200 1.2 43 500

TEST25-150NP 25 150 1.2 47 500

TEST25NP 25 200 1.2 63 500

TEST30NP 30 200 1.5 93 250


TUBES & DISh

TEST TUBEwithout Rim

Code No.



Length (mm)

Wall Thick (mm)

9820TST10-75NP 10 75 1.0 3 2,000

9820TST 12-75NP 12 75 1.1 4 2,000

9820TST 12-90NP 12 90 1.1 5 2,000

9820TST 12-105NP 12 105 1.1 6 2,000

9820TST12NP 12 120 1.1 7 2,000

9820TST13-75NP 13 75 1.2 5 2,000

9820TST13-80NP 13 80 1.2 6 1,000

9820TST13-90NP 13 90 1.2 6 2,000

9820TST13-100NP 13 100 1.2 7 1,000

9820TST15-75NP 15 75 1.2 7 1,000

9820TST15-85NP 15 85 1.2 8 1,000

9820TST15-90NP 15 90 1.2 9 1,000

9820TST15-105NP 15 105 1.2 10 1,000

9820TST15NP 15 150 1.2 15 1,000

9820TST16-100NP 16 100 1.2 12 1,000

9820TST16-125NP 16 125 1.2 14 1,000

9820TST16-150NP 16 150 1.2 17 1,000

9820TST16.5-105NP 16.5 105 1.2 13 1,000

9820TST16.5NP 16.5 165 1.2 20 1,000

9820TST18-150NP 18 150 1.2 23 500

9820TST18-165NP 18 165 1.2 25 500

9820TST18NP 18 180 1.2 27 500

9820TST20-150NP 20 150 1.2 29 500

9820TST21NP 21 200 1.2 43 500

9820TST25-150NP 25 150 1.2 47 500

9820TST25NP 25 200 1.2 63 500

9820TST30NP 30 200 1.5 93 250


PrODUCT

TEST TUBEwith Screw, without Cap

TEST TUBEwith Screw, Amber Color without Cap

Code No.



Length (mm) Cap Size

TST-SCR13-100 13 100 GCMI415-13 7 400

TST-SCR16-100 16 100 GCMI415-15 11 400

TST-SCR16-125 16 125 GCMI415-15 14 400

TST-SCR16-150 16 150 GCMI415-15 17 400

TST-SCR18-180 18 180 GCMI415-18 27 200

TST-SCR20-125 20 125 GCMI415-18 23 200

TST-SCR20-150 20 150 GCMI415-18 28 200

TST-SCR25-150 25 150 GCMI410-24 45 200

TST-SCR25-200 25 200 GCMI410-24 61 200

Code No.



Length (mm) Cap Size

B-TST-SCR13-100 13 100 GCMI415-13 7 50

B-TST-SCR16-100 16 100 GCMI415-15 11 50

B-TST-SCR16-125 16 125 GCMI415-15 14 50

B-TST-SCR16-150 16 150 GCMI415-15 17 50

B-TST-SCR18-180 18 180 GCMI415-18 27 50

B-TST-SCR20-125 20 125 GCMI415-18 23 25

B-TST-SCR20-150 20 150 GCMI415-18 28 25

B-TST-SCR25-150 25 150 GCMI410-24 45 25

B-TST-SCR25-200 25 200 GCMI410-24 61 25


TUBES & DISh

TEST TUBEwith Glass Stopper

TEST TUBEGraduation with Glass Stopper

Code No.

Specifications


Grad (ml)

ØD (mm)

Length (mm) TS Size

9812TST10 10 1 15 150 13 10

9812TST15 15 1 16.5 165 13 10

9812TST20 20 1 18 180 16 10

9812TST25 25 1 18 180 16 10

9812TST30 30 2 21 200 19 10

9812TST50 50 2 25 200 22 10

Code No.

Specifications


Length (mm) TS Size

9810TST12-F 12 120 9 10

9810TST15-F 15 150 13 10

9810TST16.5-F 16.5 165 13 10

9810TST18-F 18 180 16 10

9810TST21-F 21 200 19 10

9810TST25-F 25 200 22 10

9810TST30-F 30 200 27 10


PrODUCT

TEST TUBEwith Rim, with Graduation

DIGESTIOn TUBE

Code No.

Specifications


Grad (ml) Tol. ØD x L

(mm)

9802TST15 15 1 ± 0.75 15 x 150 50

9802TST20 20 1 ± 0.8 16.5 x 165 50

9802TST30 30 1 ± 0.9 18 x 180 50

Code No.

Specifications


ØD (mm)

Length (mm)

Wall (mm)

Tube-26-300 100 26 300 2.0 10

Tube-42-300 250 42 300 2.3 10


TUBES & DISh

DUrHAM TUBEwithout Marking

CRySTALLIzING DISH

Code No.Specifications

Pcs/CaseØD (mm)

Length (mm)

Wall (mm)

9820TST6-30 6 30 1.0 100

9820TST6-40 6 40 1.0 100

9820TST6-50 6 50 1.0 100

9820TST6-60 6 60 1.0 100

9820TST7-30 7 30 1.0 100

9820TST7-40 7 40 1.0 100

9820TST7-50 7 50 1.0 100

9820TST7-60 7 60 1.0 100

9820TST8-30 8 30 1.0 100

9820TST8-40 8 40 1.0 100

9820TST8-50 8 50 1.0 100

Code No.

Specifications


ØD (mm)

Length (mm)

Wall (mm)

3175DISh40-25 20 40 25 2.0 6

3175DISh50-30 40 50 30 2.0 6

3175DISh60-35 60 60 35 2.4 6

3175DISh70-40 100 70 40 2.4 6

3175DISh80-45 150 80 45 2.4 6


PrODUCT

Code No.

Specifications

A (mm) B (TS) C (TS)

CONTB 90-14/23 70 14/23 14/23

CONTB 90-19/26 90 19/26 19/26

Code No.

Specifications

A (mm) B (TS)

8920 CONTB 75-14/23 70 TS 14/23

8920 CONTB 75-19/23 90 TS 19/26

TUBE COnnECTInG 900

TWO WAyTS Joints (ISO, K-6)

TUBE COnnECTInG 750


Marking

IWAKIASAHI GLASSMADE IN INDONESIA

CTE33

Marking:


CTE33

Marking:

Marking


TUBES & DISh

Code No.

Specifications

A (mm) B (TS)

8940 CONTB 105-14/23 70 14/23

8940 CONTB 105-19/26 90 19/26

TUBE COnnECTInG 1050


Code No.

Specifications

A (mm) B (mm) C (TS)

8930 CONECT 100-14/23 100 70 14/23

8930 CONECT 100-19/26 100 90 19/26

8930 CONECT 200-14/23 200 70 14/23

8930 CONECT 200-19/26 200 90 19/26

TUBE COnnECTInG 1050


Marking

Marking


CTE33

Marking:


CTE33

Marking:


PrODUCT

Marking

Marking

B

A

No. 2

No. 1

75 0 ± 1 0

No. 3

Code No.

Specifications

A (mm)

B (mm)

No. 1 (TS)

No. 2 (TS)

No. 3 (TS)

9000 CONECT 14-14/23 120 70 TS 14/23

TS 14/23

TS 14/23

9000 CONECT 14-29/32 160 90 TS 14/23

TS 14/23

TS 29/32

9000 CONECT 19-24/29 150 80 TS 19/26

TS 19/26

TS 24/29

Code No.

Specifications

A (mm) B (mm) C (TS) D (TS)

8940L-CONTB 105-14/23 150 70 14/23 14/23

8940L-CONTB 105-19/26 150 90 19/26 19/26

TUBE COnnECTInG DISTILLINGTS Joints (ISO, K-6)

TUBE COnnECTInG THREE WAyTS Joints (ISO, K-6)


CTE33

Marking:


CTE33

Marking:

Marking


TUBES & DISh

Code No.

Specifications

A0 B (mm)

C (mm)

D (mm)

E (mm)

MALE (TS)

FEMALE (TS)

CONT BCLS 75-14/23 750 105 60 42.5 57 TS 14/23

TS 14/23

CONT BCLS 75-19/26 750 119 48 50 81 TS 19/26

TS 19/26

TUBE COnnECTInG CLAISEN TyPE

TS Joints (ISO, K-6)

E

D

Marking

C

BA0

Code No.

Specifications

A (TS) B (mm) C (mm)

9120 CONECT 14/23 TS 14/23 60 110

9120 CONECT 19/26 TS 19/26 60 128

TUBE COnnECTInG 900,

GLASS STOPCOCK, INNERTS Joints (ISO, K-6)

Marking

A

B

900 ±10

C


CTE33

Marking:


CTE33

Marking:


PrODUCT

APPArATUS


APPArATUS

SOxHELET ExTRACTOR APPArATUS

Code No.

SpecificationsPcs/CaseVolume

(ml)Upper

TSLower

TSLength (mm)

SOXH-SET-100 100 560 1

Soxhelet Apparatus Part

a. Condenser 2485COND200-29/32 Jacket Length : 200 mm

Condenser - 29/32 292 1

b. Extractor EXTRACTOR-50 50 29/32 24/29 219 1

c. Boiling F/B 100 ml 4100FK-100-24/29 100 24/29 - 110 1

Code No.

Specifications

Pcs/CaseVolume (ml)

Upper TS

Lower TS

Length (mm)

0107SOXH-SET 150 702 1


a. Condenser 2485COND200 Condenser - 34/35 350 1

b. Extractor 3740EXTRACTOR 34/35 24/40 300 1

c. Flask 150 ml 4100FK-150 150 24/40 - 127 1

100 ml

150 ml


PrODUCT

SOxHELET ExTRACTOR APPArATUS Code No.

Specifications

Pcs/CaseVolume (ml)

Upper TS

Lower TS

Length (mm)

SOXH-SET-250 250 613 1



Condenser - 34/35 295 1


c. Boiling F/B 250 ml 4100FK-250-24/29 250 24/29 - 135 1

Code No.

Specifications

Pcs/CaseVolume (ml)

Upper TS

Lower TS

Length (mm)

SOXH-SET-500 500 703 1



Condenser - 45/40 325 1


c. Boiling F/B 500 ml 4100FK-500-29/32 500 29/32 - 170 1

Code No.

Specifications

Pcs/CaseVolume (ml)

Upper TS

Lower TS

Length (mm)

SOXH-SET-1000 1,000 825 1



Condenser - 45/40 350 1


c. Boiling F/B 1000 ml 4100FK-1000-29/32 1,000 29/32 - 190 1

250 ml

500 ml

1,000 ml


APPArATUS

Code No. Specifications

KJELDhAL-DIST-APPKjeldhal Flask 500 ml TS 24/29• Connecting Bulb TS 24/29• Graham Condenser, Jacket Length 300 mm•


0101CYAN-1-SET Boiling 1,000 ml• Graham Condenser, Jacket length 400 mm•

KJELDHAL DISTILLATION APPArATUS

CyANIDA DISTILLATION APPArATUS

AMMOnIUM DISTILLATIOn APPArATUS


0108AMMON-SET Boiling 1,000 ml• Graham Condenser, Jacket length 300 mm•

PrODUCT

Specifications

Output - ± 3.5 ltr/hr (actual result)

Ph - 5.5 – 6.0

Electrical Power - 3 KW, 240 V, Single Phase

Dimension (w x h x l) - ± 17.5 x 45 x 47 (cm)

Weight - ± 9 kg

heater Type - Spiral

Water Distillation “WS-6” Parts

a. Casing WS-6

b. Heater WS-6

- Thermostat

- Element heater

c. Condenser WS-6

d. Boiler WS-6

Water Distillation “WS-6” Accessories

a. Plastic Screw Cap + Hose Connection

b. O-Ring 32 x 25

c. O-Ring 42 x 32

d. Grip/Clem + Baut M6

e. Slang Silicone

WATER STILL DISTILLATION



OTHERS

OTHER


PrODUCT

SAMPLInG TUBETeflon Stopcock

SAMPLInG TUBEGlass Stopcock

Code No. Cap’ty (ml)

Stopcock SizeOD x

Length (mm)

Pcs/CaseNS Bore

DO-TUBE-125T 125 12.5 2.5 40 x 300 1

DO-TUBE-250T 250 14.5 2.5 50 x 330 1

DO-TUBE-500T 500 18.8 4.0 65 x 378 1

Code No. Cap’ty (ml)

Stopcock SizeOD x

Length (mm)

Pcs/CaseNS Bore

DO-TUBE-125 125 12.5 2.5 40 x 300 1

DO-TUBE-250 250 14.5 2.5 50 x 330 1

DO-TUBE-500 500 18.8 4.0 65 x 378 1


OTHERS

ASPIRATOR

WEIGHInG BOTTLE

Code No.Specifications

Pcs/CaseØ D (mm)

Height (mm)

Thick (mm)

WEIGhTBT18-30 18 30 1.2 10

WEIGhTBT25-45 25 45 1.2 10

WEIGhTBT30-30 30 30 1.2 10

WEIGhTBT30-45 30 45 1.2 10

WEIGhTBT30-60 30 60 1.2 10

WEIGhTBT40-40 40 40 1.5 10

WEIGhTBT40-60 40 60 1.5 10

WEIGhTBT45-45 45 45 1.6 10

WEIGhTBT50-30 50 30 1.6 10

WEIGhTBT50-50 50 50 1.6 10

WEIGhTBT50-75 50 75 1.6 10

WEIGhTBT60-40 60 40 2.4 10

WEIGhTBT60-75 60 75 2.4 10

Code No.

Specifications

Pcs/CaseØ Nozzle (mm)

Length (mm)

5346ASP 9 330 1


PrODUCT

GAS WASHING BOTTLE

DryInG TUBEU-Shape

Code No.

Specifications


Ø D (mm)

Height (mm)

1464-100 100 40 167 34/35 1

1464-300 300 55 202 34/35 1

1464-500 500 70 242 34/35 1

Code No.

Specifications

Pcs/CaseLength (mm)

ID (mm)

Ø Connector (mm) TS Size

U-Tube-100 100 12.8 7 14/23 1

U-Tube-125 125 12.8 7 14/23 1

U-Tube-150 150 19 8 19/26 1

U-Tube-180 180 19 8 19/26 1


OTHERS

Code No.

Specifications


Ø D (mm)

Height (mm)

Tol (ml)

1635FBT100 100 50 113 5 10

1635FBT300 300 65 168 15 1

BODBottle

GLASS RODSpreader

Code No.

Specifications

Pcs/CaseØ D (mm)

S (mm)

Length (mm)

ROD-SPD7-120 7 35 120 10


PrODUCT

GLASS RODStirrer

Code No.

Specifications

Pcs/CaseØ D (mm)

Length (mm)

ROD-5-200 5 200 10

ROD-6-250 6 250 10

ROD-7-250 7 250 10

MEASUrE CUPwithout handle

Code No. Vol. (mm)

Grad (mm)

Length (mm) Pcs/Case

M-CUP100 100 10 70 10

M-CUP250 250 25 97 10


OTHERS

MEASUrE CUPwith handle

Code No. Vol. (mm)

Grad (mm)

Length (mm) Pcs/Case

M-CUP100Wh 100 10 70 10

M-CUP250Wh 250 25 97 10

Code No. Pcs/Case

7575P-ST9 10

7575P-ST13 10

7575P-ST16 10

7575P-ST19 10

7575P-ST22 10

7575P-ST27 10

PLASTIC STOPPER


PrODUCT

GLASS STOPPER

Code No. TS Size D (mm)

d (mm)

L (mm)

Pcs/Case

7570G-STOPER9 9 9.40 8.00 14.00 50

7570G-STOPER13 13 13.40 12.00 14.00 50

7570G-STOPER16 16 16.50 15.00 15.00 50

7570G-STOPER19 19 19.70 18.00 17.00 50

7570G-STOPER22 22 22.05 20.00 20.50 25

7570G-STOPER27 27 27.15 25.00 21.50 25

7570G-STOPER38 38 38.00 35.00 30.00 20


d (mm)

L (mm)

Pcs/Case

7570G-STOPER19/26 19/26 18.80 16.20 26.00 25

7570G-STOPER24/29 24/29 24.00 21.10 29.00 25

7570G-STOPER29/32 29/32 29.20 26.00 32.00 25

7570G-STOPER34/35 34/35 34.50 31.00 35.00 25


d (mm)

L (mm)

Pcs/Case

7570G-STOPER15/35 15/35 15.50 12.00 35.00 50

7570G-STOPER19/38 19/38 18.80 15.00 38.00 25

7570G-STOPER24/40 24/40 24.00 20.00 40.00 25

7570G-STOPER29/42 29/42 29.20 25.00 42.00 25


d (mm)

L (mm)

Pcs/Case

7570G-STOPER14/10 14/10 14.50 13.50 10.00 50

7570G-STOPER15/25 15/25 14.50 13.00 25.00 50

7570G-STOPER19/22 19/22 18.80 16.60 22.00 25

7570G-STOPER19/28 19/28 18.80 16.00 28.00 25

7570G-STOPER24/12 24/12 24.00 22.80 12.00 25

7570G-STOPER24/25 24/25 24.00 21.50 25.00 25

7570G-STOPER24/30 24/30 24.00 21.00 30.00 25

Vol. Flask

ISO Standard (K6 series)

JIS Standard

JIS Standard


OTHERS

SCREW CAPwith Teflon Liner

Code No. Specifications Pcs/Case

9998CAP415-13 GCMI415-13 400

9998CAP415-15 GCMI415-15 400

9998CAP415-18 GCMI415-18 200

9998CAP410-24 GCMI410—24 200

9998CAP410-28 GCMI410-28 100

9998CAP430-33 GCMI430-33 50

9998CAP430-38 GCMI430-38 50

CAPPP Clear, for Flask Culture and

Test Tube Culture

Code No. Specifications Pcs/Case

9988CAP25 For Ø 35 500

9988CAP30 For Ø 30 500

9988CAP38 For Ø 38 500


PrODUCT

BrUSHES

Code No. Pcs/Case

BRUS1.5-5.5-22 10

BRUS2.5-6.5-22 10

BRUS2-16-60 10

Date post:	11-Mar-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Table of Content - CWTCcwtc.com.pk/cwtc-old/downloads/Catalogs-FINAL-March-2016/... ·...

Documents