docshare04.docshare.tipsdocshare04.docshare.tips/files/30952/309525358.pdfTABLE OF CONTENTS . 1.0...

TABLE OF CONTENTS

1.0 FACILITIES OVERVIEW ............................................................................................ 3

2.0 DEFINITIONS AND ABBREVIATIONS ...................................................................... 5

3.0 SPECIFICATIONS, CODES AND STANDARDS ....................................................... 8

4.0 Document Scope ..................................................................................................... 23

5.0 SPECIFICATION DEVIATION / CONCESSION CONTROL .................................... 24

6.0 QUALITY ASSURANCE / QUALITY CONTROL ...................................................... 24

7.0 UNITS OF MEASURE .............................................................................................. 25

8.0 SELECTION OF PIPING CLASSES / PIPING CLASS IDENTIFICATION ............... 26

9.0 GENERAL REQUIREMENTS .................................................................................. 29

10.0 MATERIALS FOR SOUR SERVICE ........................................................................ 31

11.0 REQUIREMENTS FOR PIPE .................................................................................. 33

12.0 REQUIREMENTS FOR FITTINGS .......................................................................... 34

13.0 REQUIREMENTS FOR FLANGES .......................................................................... 35

14.0 REQUIREMENTS FOR GASKETS .......................................................................... 36

15.0 REQUIREMENTS FOR BOLTING ........................................................................... 36

16.0 REQUIREMENTS FOR VALVES ............................................................................. 37

17.0 MISCELLANEOUS REQUIREMENTS ..................................................................... 38

18.0 PAINTING AND COLOUR CODING ........................................................................ 38

19.0 GENERAL NOTES................................................................................................... 38

APPENDIX-1 PIPING CLASS INDEX APPENDIX-2 MATERIAL CLASS SPECIFICATIONS APPENDIX-3 MATERIAL OF CONSTRUCTION FOR VALVES

DOCUMENT TITLE: Piping Material Specification SNC Document #: 618450-2000-46EG-0001

ADCO DOCUMENT No. : 58.99.12.0603

PAGE: 2 OF 38

ADCO PROJECT No. : P14395 REV 1 DATE: 2014-11-20

1.0 FACILITIES OVERVIEW

1.1 Overall Facility

ADCO has been chartered by their shareholders to expand sustainable crude oil production from its current level of 1.4 million barrels oil per day (MMBOPD) to 1.8 MMBOPD. Accordingly, ADCO has undertaken projects for development of its marginal fields to help achieve this target, which involves increasing production at existing Bab & North-East Bab oil fields and beginning productions from two new oil fields, namely, Bida Al Qemzan & Qusahwira.

Qusahwira is a new field located about 80 Km Southeast of existing Asab oil field and approximately 200 km south-southeast of Abu Dhabi city. The location of the Qusahwira field is depicted in Figure 1-1 below:

Figure 1-1

Full development drilling of the Qusahwira field will be executed in two phases. The development under Phase- I is limited to the southern block of the field, involving Thamama Zones A/B and F. The phase-I of Qusahwira project will contribute 30,000 BOPD (sustainable) to 1.8 MMBPOD scheme from year 2013 for a period of about five years. (Currently under operation). After completion of phase-II (under this scope), its total production shall increase to 55,000 BOPD (sustainable). Additionally, 20,000 BOPD from Mender shall flow up by 2017.



PAGE: 3 OF 38


1.2 Project Scope

Phase-II facilities will be distributed between the wellpads, gathering stations, and existing facilities at CDS and RDS-1 as follows:

• Wellpads (24) • Gathering Stations (3) • Water Injection Clusters (3)

The EPC Contractor shall do the complete design for the wellpads (as per scope of work). Each drilling pad will have a combination of oil producers and injectors. Chemical injection and OHL power shall be provided on each wellpads. Following are the associated facilities involved in each wellpad:

• Oil and WAG injectors well heads & associated piping • Manifolds (For Gas Lift, WI, GI and Oil Production) • Chemical Injection Skid • OHL • WHCPs

Each gathering station shall be equipped with a production header to gather the gross production from a set of wellpads through non-piggable flowlines from the pads. Testing of all the wells shall be carried out at the gathering stations for which individual test lines from each pad run parallel to the production flow line towards the GS. The test line from each pad will serve for both testing as well for draining/venting the flow line to the GS during depressurisation. Following are the associated facilities involved in each of the gathering stations.

• Production Headers (OIL, GL, GI & WI) • Multiphase Flow Meters (MPFM) • Instrument Air System • N2 Supply System • Chemical Injection skids • Flare and Closed Drain System • Potable Water System

Two (2) transfer lines are provided from gathering stations GS-2 and GS-3 in the northern sides of the field, whereas the transfer lines from gathering station GS-4 in the southern side of the fields are connected to existing RDS-1 then exported to CDS through the existing 20” TL. The total oil production from CDS is exported to Asab through the existing 14” MOL. All these transfer lines shall be buried, coated and CP protected.



PAGE: 4 OF 38


Three (3) new WICs will be provided (i.e. one (1) at GS-2 location, one (1) at GS-3 and one (1) at GS-4). Each new WIC shall have a design capacity of 30,000 BWPD. Injection flow shall be delivered from the surface pumps via surface laid injection headers to distribution manifolds at the well pads where shorter surface laid injection lines will be branched off and routed to individual WI/WAG wells. The WICs located at GS-2 & GS-3 shall be connected. The WIC at GS-4 shall be connected to existing WIC located near existing RDS-1.

The existing facilities at CDS are not adequate to cater for the Phase-II production and additional equipment is required for Phase-II as follows:

• Three (3) Slug catchers; • One (1) Production separator; • Two (2) Oil booster pumps; • Three (3) MOL export pumps; • One (1) Gas injection compressor train; • One (1) Gas lift compressor train; • One (1) Gas dehydration and glycol regeneration system; • One (1) Water separation tank; • One (1) Water disposal tank; and • Two (2) Water disposal pumps.

2.0 DEFINITIONS AND ABBREVIATIONS

2.1 Definitions

COMPANY Abu Dhabi Company for Onshore Oil Operations (ADCO) including its successors and assignees

PROJECT Qusahwira Phase-II Development Project

FEED CONSULTANT SNC-Lavalin International

EPC CONTRACTOR The party which carries out all or part of the engineering, procurement, construction, pre-commissioning and commissioning of the project.

VENDOR / MANUFACTURER / SUB VENDOR

The person, firm, Company or Corporation including their assignees to which the purchase works are awarded.



PAGE: 5 OF 38


SUB-CONTRACTOR Firm, Company, Joint Venture or Consortium whom any construction / fabrication / installation work is awarded by EPC Contractor.

WORKS All temporary and permanent work described in this specification and in the Contract.

SHALL Indicates a mandatory requirement.

SHOULD Indicates a strong recommendation to comply with the requirements of this document.

2.2 ABBREVIATIONS

ANSI American National Standards Institute ASCC Alkaline Stress Corrosion Cracking ASME American Society Of Mechanical Engineers ASTM American Society For Testing And Materials AG Above Ground AW Aquifer Water BB Bolted Bonnet BC Bolted Cover BD Blowdown Drain (Automatic Process Drain) BE Bevelled End BG Bolted Gland BW Butt Weld BZ Biocide CO Clean Out or Purge Connection CS Carbon Steel CSC Car Seal Close CSO Car Seal Open CV Control Valve CVA Choke Valve CW Cooling Water CZ Coagulation Water D Drains DF Diesel Fuel DN Nominal Diameter DW Potable Water DZ Demulsifier EEMUA Engineering Equipment and Materials Users Association



PAGE: 6 OF 38


EB Extended Bonnet ETr Electrical Tracing FB Full Bore FF Flat Face FG Fuel Gas FOR Flushing Out Run FOS Flushing Out Supply FV Full Vacuum FW Fire Water FZ Foam GL Glycol GO Gear Operated D Glycol Drain GTAW Gas Tungsten Arc Welding HC Hydro Carbon Condensate HCV Hand Control Valve HDR Header HF Hard Faced (Satellite No. 6) HIC Hydrogen Induced Cracking HITS High Integrity Trip System HM Heating Medium HO Hydraulic Oil IA Instrument Air IG Injection Gas ISNRS Inside Screw Non-Rising Stem ISRS Inside Screw Rising Stem IW Injection Water IZ Corrosion Inhibitor LC Lock Closed LO Lock Open LZ Deoiler MOV Motor Operated Valve NACE National Association Of Corrosion Engineers NC Normally Closed NN Nitrogen NO Normally Open NRV Non-return Valve OS&Y Outside Screw and Yoke OZ Oxygen Scavenger PA Plant Air PG Process Gas



PAGE: 7 OF 38


PO Process Oil PSB Pressure Seal Bonnet PTFE Poly Tetra Fluoro Ethylene PVSV Pressure / Vacuum Relief Valve PW Produced Water PWHT Post Weld Heat Treatment R Relief (General) RB Reducing Bore RF Raised Face RO Restricting Orifice RTRP Reinforced thermosetting-resin pipe RV Relief Valve RW Raw Water SC Sample Connection Scrd Screwed SD Sewage Drains SO Seal Oil SOHIC Stress Oriented Hydrogen Induced Cracking SP Set Pressure SSC Sulphide Stress Corrosion SSSV Sub-Surface Safety Valve SSV Surface Safety Valve SW Socket Weld SZ Anti Scale TB Tender Bulletin TRIM Stem, body seating surface, disc and gate seating surface, backseat, ball, plug, etc., and all other parts in contact with line fluid. Whenever "full" is used, it means that all parts shall be made from the material specified and not just the surface mating material TSO Tight Shut Off UC Utility Connections UG Under ground UN Unified National UNC Unified National Coarse UNS Unified National Special V Vent VG Vent Gas (Flare) WB Welded Bonnet Z Antifoam

3.0 SPECIFICATIONS, CODES AND STANDARDS



PAGE: 8 OF 38


3.1 Project Specifications

The following project specifications shall be used in conjunction with this specification: 58.99.91.0621 HSE & Fire Protection Philosophy

58.99.12.0601 Plant Layout and Piping Basis of Design

58.99.12.0604 Specification for Insulation

58.99.91.0628 Material Selection Report

58.99.12.0605 Painting and Coating Specification

58.99.91.0623 Material Selection & Corrosion Control Philosophy

58.99.19.0601 Line List

3.2 ADCO Specifications and Documents

30.99.00.0102-1 Corrosion and Material Selection Philosophy

30.99.12.0023 Plant Layout & Piping Basis of Design

30.70.12.0003 Specifications of Ball Valves for Oil Gathering Systems

30.70.12.0002 Specifications of Ball Valves for Gas Gathering Systems

30.99.37.0013 Painting and Coating of New Equipment

30.99.12.3209 Specification for piping Valves

3.3 Shell Specifications

Shell DEP ver 37, and the latest MESC shall be used. Specification and Shell Standard Drawings frequently used of the applicable Shell DEP and MESC are listed in sections 2.3.1 and 2.3.2 respectively of this document.

Piping classes applicable to the upstream facilities (Exploration and Production) are those under Shell DEP 31.38.01.15.Gen. The Piping Classes-Refining and Chemicals - under DEP 31.38.01.12.Gen. shall be used only for items not covered in exploration and Production DEP (such as GRE Classes, etc.).

3.3.1 ADCO Amendments/Supplements to Shell DEPs

ES 30.99.37.0013 : ADCO Amendments / Supplements to SHELL DEP 30.48.00.31-Gen

ES 30.99.12.0024 : ADCO Amendments / Supplements to SHELL DEP 31.40.10.19-Gen, Glass Fiber Reinforced Plastic Pipeline and Piping Systems



PAGE: 9 OF 38


ES 31.38.60.10A : ADCO Amendments/Supplements to Shell DEP 31.38.60.10-Gen Hot Tapping on Pipelines, Piping and Equipment

ES 31.38.01.31-A : ADCO Amendments/Supplements to Shell DEP 31.38.01.31.Gen Shop and Field Fabrication of Steel Piping Shell Specifications

30.99.00.0044 Amendment / Supplement to Shell DEP 31.40.00.10-Gen.

3.3.2 Shell Referenced Standards/DEPs

DEP 00.00.06.06 Gen. Index to standard drawings

DEP 01.00.01.30-Gen. Definition of temperature, pressure and toxicity levels

DEP 30.10.02.11-Gen. Metallic materials - selected standards

DEP 30.10.02.13-Gen. Non-metallic materials - selection and application

DEP 30.10.02.31-Gen. Metallic materials - prevention of brittle fracture

DEP 30.10.60.18-Gen. Welding of Metals (amendments/supplements to API RP 582)

DEP 30.10.60.31-Gen. Oxidation of Stainless steel weldments

DEP 30.46.00.31-Gen. Thermal Insulation (Amendment / supplement to CINI Handbook)

DEP 30.48.00.31-Gen. Protective coatings for onshore and offshore facilities

DEP 31.10.03.10-Gen. Symbols and identification system – mechanical



PAGE: 10 OF 38


DEP 31.10.00.10-Gen. Material traceability and positive material identification (PMI)

DEP 31.21.01.30-Gen. Shell and tube heat exchangers (amendments / supplements to TEMA standards)

DEP 31.22.05.11-Gen. Gas/liquid separators - type selection and design rules

DEP 31.22.10.32-Gen. Pressure vessels (amendments / supplements to PD 5500)

DEP 31.22.20.31-Gen. Pressure vessels (amendments / supplements to ASME Section VIII, Division 1 and Division 2)

DEP 31.29.02.11-Gen. Pumps – Type selection & procurement procedure

DEP 31.29.12.30-Gen. Reciprocating positive Displacement Pumps & Metering Pumps (Amendment /supplements to API 674 & API 675)

DEP 31.29.40.31-Gen. Reciprocating compressors amendments /supplements to API Std 618)

DEP 31.38.01.11-Gen. Piping- General Requirements

DEP 31.37.00.11-Gen. Instrument Air Supply

DEP 31.38.01.10-Gen. Piping class - Basis of Design

DEP 31.38.01.12-Gen. Piping classes - Refining and Chemicals

DEP 31.38.01.15-Gen. Piping classes - Exploration and Production

DEP 31.38.01.21-Gen. Specification for Piping Systems



PAGE: 11 OF 38


DEP 31.38.01.29-Gen. Pipe Supports

DEP 31.38.01.31-Gen. Shop and field fabrication of steel piping

DEP 31.38.30.11-Gen. Protective steam heating of piping systems

DEP 31.38.60.10-Gen. Hot tapping on pipeline, piping and equipment

DEP 31.40.10.19 Gen. Glass fibre reinforced plastic pipeline and piping systems

DEP 31.40.20.32 Gen. CRA clad or lined steel pipes (Amendments/ supplements to API Spec 5LD)

DEP 61.40.20.30-Gen. Welding of pipelines and related facilities

DEP 70.10.70.11-Gen. Preservation of New and Old Equipment Standing Idle

DEP 80.36.00.30 Gen. Relief valves - selection, sizing and specification

DEP 80.45.10.10 Gen. Design of Pressure Relief, Flare and Vent Systems

MESC Groups 74, 76,77,81,85

MESC Buying Descriptions and additional specifications for piping components

CMT (CD-Rom) Catalogue Management Tool (version 4.0).

3.4 MESC SPE’s reference

Relevant MESC Specification (Latest) related to piping components and valves as below

74/001 Carbon steel pipe to API 5L

74/002 Carbon steel pipe to ASTM A106



PAGE: 12 OF 38





74/006 Alloy steel pipe to ASTM A335

74/007 Alloy steel pipe to ASTM A691

74/008 Stainless steel pipe to ASTM A312

74/009 Stainless steel pipe to ASTM A358

74/010 Aluminium alloy pipe to ASTM B241

74/013 Nickel alloy pipe to ASTM B622

74/014 Duplex/superduplex ss pipe to ASTM A790

74/015 Copper alloy pipe to ASTM B111





74/021 Titanium pipe to ASTM B861

74/022 Duplex stainless steel pipe to ASTM A928



74/038 Pipe, carbon steel with CRA cladding, seamless

74/039 Pipe, carbon steel with CRA cladding, welded

74/050 Tubes, carbon steel, ASTM A179

74/051 Tubes, alloy steel, ASTM A269

74/052 Tubes, non-ferrous, ASTM B163

74/125 Hydrogen induced cracking sensitivity test

76/001 Surface finish of flanges

76/008 Fittings, carbon steel with CRA cladding

76/011 Y-type strainers

76/012 Spectacles/spades/spacers to ASME B16.48

76/025 Orifice flanges to ASME B16.36

76/030 Branch outlet fittings to mss sp-97

76/031 Branch fittings

76/032 Welded-in contour insert fittings

76/033 Thermowells



PAGE: 13 OF 38


76/034 Blind flange liners.

76/039 Compression type tube fittings.

76/040 Orifice meter runs

76/045 Sight level gauges, plate-type, process

76/048 Flanges & branch outlets cs with CRA cladding

76/100 Flanges to ASME B16.5

76/101 Flanges to ASME B16.47

76/110 Fittings to ASME B16.9

76/200 Carbon/alloy steel fittings to ASTM A234

76/201 Carbon steel fittings to ASTM A420

76/202 Stainless steel fittings to ASTM A403

76/204 Nickel alloy fittings to ASTM B366

76/205 Aluminium alloy fittings to ASTM B361

76/206 Titanium fittings to ASTM B363

76/210 Carbon steel forgings to ASTM A105

76/211 Carbon steel forgings to ASTM A350

76/212 Alloy and SS forgings to ASTM A182

76/213 Nickel alloy forgings to ASTM B564

76/220 Carbon steel plate to ASTM A516

76/221 Alloy steel plate to ASTM A387

76/223 Nickel-copper alloy plate to ASTM B127

76/224 Nickel alloy plate to ASTM B168


76/222 Stainless steel plate to ASTM A240


77/100 Ball valves to BS 5351

77/101 Gate, globe and check valves to BS 5352

77/102 Gate valves to BS 1414

77/103 Globe valves to BS 1873

77/104 Check valves to BS 1868

77/105 Gate, globe and check valves, copper alloy design to BS 5154

77/110 Ball valves to ISO 17292



PAGE: 14 OF 38


3.5 MESC SPE’s reference

S

3

8

.

0

0

2 : Y-Type suction strainers, ASME Class 150 & 300

S

3

8

.

0

0

4 : Bucket type suction strainers, CS, ANSI Class 150

S

3

8.005 : Sieve for Y-Type strainer

77/111 Gate valve to API 603

77/130 Ball valves to API 6D (ISO 14313), Flanged or Butt-weld ends.

77/132 Swing check valve to ISO 14313/API 6D

77/133 Wafer type (dual plate) check valves to API 594

77/134 Butterfly Valve to API 609

77/160 Gate, Globe and Check Valves to ASME B16.34

77/165 Integral double block and bleed instrument isolation valves

77/170 Process to Instrument Valves

77/208 Valves in heat transfer fluid service

77/211 Valve stem, adapt dim floating ball valve

77/302 Materials non-destructive examination and certification requirements for valves in general sevices

77/303 Valves in special service

77/310 Painting and Coating of valves

77/312 Fugitive emission production testing

77/313 Valves with CRA-Cladding/Overlay

81/001 Alloy and ss steel bolts to ASTM A193

81/002 Carbon and alloy steel nuts to ASTM A194

81/006 Nickel alloy bolts and nuts to EN 10269

85/100 Covered serrated metal gaskets to EN12560-6

85/101 Non-metallic flat gaskets to ASME B16.21

85/103 Spiral wound gaskets to ASME B16.20

85/112 Metal ring joint gaskets to ASME B16.20

85/200 Recommended packing makes and style

85/201 Flange insulation sets

85/203 Graphitic packing material to ASTM F2168

85/204 Packing material, graphite and carbon-ASTM F2191

85/300 Type acceptance testing of gaskets

85/301 Toroidal (o-ring) test procedure



PAGE: 15 OF 38


S38.011 : Spectacle blinds for ASME flanges

S38.041 : Temporary strainer for compressors

S38.042 : Spade blinds for ASME flanges

S38.043 : Spacer for ASME flanges, for replacement of spades

S38.046 : Cover flanges for flanged thermo well Nozzle

S38.090 : Branch fittings

S38.130 : Orifice flanges, Raised Face, with flange tappings,

ASME Classes 300 to 2500 incl. nom size DN 50 to

DN 600 incl.

S38.131 : Orifice flanges, Raised Face, with corner tappings,

ASME Classes 300 to 600 incl. nom size DN 50 to

DN 600 incl.

S38.134 : Orifice meter runs with flanged ends, ASME

Classes 150 to 1500 incl., nom. Size DN 15 to DN

40 incl.

S44.030 : Typical bracings for small bore branches of piping (e.g.

drain/vent point)

S44.031 : Typical bracings for small bore branches of piping (e.g.

orifice instrument connection)

S44.032 : Typical bracings for small bore branches of

piping (e.g. pressure instrument connection)

S88.013 : Two-way or Four-way Hydrant for GRE Underground

piping in non-freezing areas

S88.018 : Four-way Hydrant header with Monitor connection

3.6 International Codes, Standards and Specifications

3.6.1 American Standards

American Petroleum Institute (API)

API 5L Specification for line pipe

API 6A Specification for Well Head & Christmas Tree Equipment

API 6D Specification for Pipeline Valves (Gate, Plug, Ball, Check)

API 6FA Specification for fire test for valves

API 6FB Specification for fire test and end connections



PAGE: 16 OF 38


API 15LE Specification for polyethylene line pipe (PE)

API 15LR Specification for Low pressure Fiberglass Line Pipe

API 15 HR Specification for High pressure Fiberglass Line Pipe

API 594 Check valve, Wafer, Wafer Lug & Double Flange Type

API 598 Valve Inspection & Testing

API 600 Steel Gate Valves Flanged & Butt Welding Ends, Bolted and

Pressure Seal Bonnets

API 602 Compact steel gate valves-Flanged, threaded, welding and

extended body Ends

API 607 Fire test for soft seated Quarter Turn Valves

API 609 Valves Double Flanged, Lug And Wafer

API RP 521 Guide for pressure and depressurizing systems

API RP 621 Reconditioning of metallic gate, globe and check valves

American Society Of Mechanical Engineering (ASME)

ASME V ASME Non-destructive Examination

ASME IX ASME Qualification standard for welding and brazing

procedures, welders, brazers, and welding and brazing operators

welding and brazing qualifications

ASME VIII ASME Boiler and Pressure Vessel Code, Division 1

ASME B1.1 Unified Inch Screw Threads (UN & UNR thread form)

ASME B1.2 Gauges and Gauging for Unified Screw threads

ASME B1.20.1 Pipe threads

ASME B16.5 Pipe flanges and flanged fittings, steel nickel alloy and other

special alloy

ASME B16.9 Factory-made wrought steel buttwelding fittings

ASME B16.10 Face to Face and End to End dimensions of Valves

ASME B16.11 Forged steel fittings, Socket welding and threaded

ASME B16.20 Metallic gaskets for pipe flanges - ring-joint, spiral-wound and

jacketed

ASME B16.21 Non-metallic flat gaskets for pipe flanges

ASME B16.24 Cast copper alloy pipe flanges and flanged fittings



PAGE: 17 OF 38


ASME B16.25 Butt welding ends

ASME B16.34 Steel Valves

ASME B16.36 Steel Orifice Flanges

ASME B16.47 Large diameter steel flanges NPS 26 Through NPS 60

ASME B16.48 Steel Line Blanks

ASME B18.2.1 Square and Hex Bolts and Screws

ASME B18.2.2 Square and Hex Nuts

ASME B31.3 Process piping

ASME B36.10 Welded and seamless wrought steel pipe

ASME B36.19 Stainless Steel Pipe

ASME PTC-10 Performance Test Code On Compressors And Exhausters

American Society Of Testing Materials (ASTM)

ASTM A 20 General Requirements for Steel Plates for Pressure Vessels.

ASTM A 53 Pipe, Steel, Black and Hot Dipped, Zinc Coated.

ASTM A 105 Forgings, Carbon Steel for Piping Components

ASTM A 106 Standard specification for seamless carbon steel pipe for high

temperature service

ASTM A153 Zinc coating (Hot-Dip) on Iron and Steel hardware

ASTM A182 Forged or Rolled Alloy Steel Pipe Flanges , Forged Fittings and

Valves and Parts for High Temperature Service

ASTM A 193 Standard specification for alloy-steel and stainless steel bolting

materials for high-temperature service

ASTM A 194 Standard specification for carbon and alloy steel nuts for bolts for

high pressure and high temperature service

ASTM A 216 Steel Castings, Carbon, Suitable for Fusion Welding for High

Temperature Service

ASTM A 234 Standard specification for piping fittings of wrought carbon steel

and alloy steel for moderate and elevated temperatures

ASTM A 240 Heat Resisting Chromium and Chromium Nickel Stainless Steel

Plate, Sheet and Strip for Pressure Vessel

ASTM A262 Practices for determining Susceptibility to Intergranular Attack in

Austenitic Stainless Steels



PAGE: 18 OF 38


ASTM A 269 Seamless and Welded Austenitic Stainless Steel Tubing for

General Service

ASTM A 312 Seamless and Welded Austenitic Stainless Steel Pipe

ASTM A 320 Standard specification for alloy steel bolting materials for low

temperature service

ASTM A 333 Standard specification for seamless and welded steel pipe for

low temperature service

ASTM A350 Carbon and Low Alloy Steel Forgings, Requiring Notch

Toughness testing for Piping Components

ASTM A 351 Standard Specification for Castings, Austenitic, Austenitic-Ferritic

(Duplex), for Pressure-Containing

ASTM A 352 Steel Castings Ferritic and Martensitic for Pressure Containing

parts suitable for Low-Temperature Service.

ASTM A 358 Standard specification for Electric-Fusion-Welded Austenitic

Chromium-Nickel alloy steel pipe for High-Temperature service.

ASTM A 403 Wrought Austenitic Stainless Steel Pipe Fittings

ASTM A 420 Standard specification for piping fittings of wrought carbon steel

and alloy steel for low-temperature service

ASTM A 450 General Requirements for Carbon, Ferritic Alloy and Austenitic

Alloy Steel Tubes

ASTM A 453 Standard specification for high temperature bolting materials, with expansion coefficients comparable to austenitic stainless steels

ASTM A 488 Steel castings, Welding, Qualifications of Procedures and Personnel

ASTM A 516 Pressure Vessel Plates, Carbon Steel for Moderate and Lower temperature services

ASTM A 530 General Requirements for Specialized Carbon and Alloy Steel Pipe

ASTM A 564 Hot-Rolled and Cold-Finished Age Hardening Stainless Steel Bars and Shapes



PAGE: 19 OF 38


ASTM A 578 Straight Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications

ASTM B 637 Standard specification for precipitation-hardening nickel alloy bars, forgings, and forging stock for high temperature service

ASTM A 700 Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment

ASTM A 703 Steel castings, General Requirements for Pressure Containing Parts

ASTM A 671 Standard specification for Electric fusion welded steel pipe for atmospheric and low temperature application

ASTM A 672 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-pressure Service at Moderate Temperatures

ASTM A 694 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves and Parts for High-pressure Transmission Service

ASTM A 790 Standard Specification for Seamless and Welded

Ferritic/Austenitic Stainless Steel Pipe

ASTM A 815 Standard Specification for Wrought Ferritic, Ferritic/Austenitic,

and Martensitic Stainless Steel Piping Fittings

ASTM A 995 Standard Specification for Castings, Austenitic-Ferritic (Duplex)

Stainless Steel, for Pressure-Containing Parts

ASTM B 423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-

Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and

Tube

ASTM B 366 Standard Specification for Factory-Made Wrought Nickel and

Nickel Alloy Fittings .

ASTM A 494 Standard Specification for Castings, Nickel and Nickel Alloy

ASTM B 424 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825

and UNS N08221)* Plate, Sheet, and Strip

ASTM B 564 Nickel Alloy Forgings

ASTM E 92 Vickers Hardness Of Metallic Materials

ASTM E 112 Determining Average Grain Size



PAGE: 20 OF 38


http://www.astm.org/Standards/B423.htm





http://www.astm.org/Standards/A494.htm



ASTM E 1268 Practice For Assessing The Degree Of Banding Or Orientation

Of Microstructures

ASTM F 1545 Standard Specification For Plastic-Lined Ferrous Metal Pipe,

Fittings And Flanges

EJMA Standards of The Expansion Joint Manufacturers Association

National Association of Corrosion Engineers (NACE)

NACE MR0103 Materials Resistant to Sulfide Stress Cracking in Corrosive

Petroleum Refining Environments

NACE MR0175 Petroleum and natural gas industries — Materials for use in

H2S-containing environments in oil and gas production

NACE TM 0177 Test Method: Testing of metals for resistance to cracking At

Ambient Temperature

NACE TM 0284 Evaluation of Pipeline steels and pressure vessels for

Resistant to Hydrogen Induced Cracking

3.6.2 International Standards

IEC 60534-4 Industrial control valves Part 4: Inspection and routine testing

ISO 5208 Industrial valves - pressure testing of valves

ISO 10497 Testing of valves – fire type testing requirements

ISO 15156 Petroleum and natural gas industries — Materials for use in

H2S-containing environments in oil and gas production

ISO 14692 Petroleum & Natural Gas Industries – GRP Piping

ISO 10474 Steel and steel products – Inspection Documents

ISO 9001 Quality system- Model for Quality assurance in design

Development, Installation and Serving

Manufacturing Standardization Society (MSS)

MSS-SP-6 Standard finishes as for Contact faces of Pipe flanges and

Connecting end; flanges of valves and fittings.

MSS-SP-9 Spot facing for Bronze, Iron and Steel Flange

MSS-SP-25 Standard marking systems for valves, fittings Flanges and Union

MSS-SP-43 Wrought stainless steel and Butt welding fittings

MSS-SP-44 Steel Pipeline Flanges



PAGE: 21 OF 38


MSS-SP-55 Quality standard for Steel castings for Valves, Flanges and

Fittings and other Piping Components; Visual method of

Evaluation of surface Irregularities

MSS-SP-58 Pipe Hangers and supports – Material, design & Manufacture

MSS-SP-69 Pipe hangers and supports - Selection NS Application

MSS-SP-75 High Test Wrought Butt welding fittings

MSS-SP-97 Integrally Reinforced Forged Carbon steel Branch Outlet Fitting –

Socket Welding, Threaded and Butt welding ends

3.6.3 British Standards

BS EN 593 Industrial Valves – Metallic Butterfly Valves

BS 1414 Steel wedge gate valves (Flanged and Butt welding ends For

Petroleum, Petro chemical and Allied Industries

BS 1868 Steel Check valves (Flanged and butt welding ends) For

Petroleum, Petro chemical and Allied Industries

BS 1873 Steel Globe and globe stop and check valves (Flanged and Butt

Welding Ends) for the Petroleum, Petro-chemical and Allied

Industries

BS 3505 Unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold

potable water

BS 4346-1 Joints and fittings for use with unplasticized PVC pressure pipes

Part 1: Injection moulded unplasticized PVC fittings for solvent

welding for use with pressure pipes, including potable water

supply

BS 4882 Specification for Bolting for Flanges and pressure containing

purposes

BS 4991 Propylene copolymer pressure pipe

BS 5134 Copper Alloy globe, Globe stop and check, check and Gate

valves

BS 5351 Steel Ball Valves for Petroleum, Petro-Chemical and Allied

Industries

BS 5352 Steel Wedge Gate, Globe and Check Valves 50 mm and Smaller

for Petroleum, Petro chemical and Allied Industries

BS 6364 Specifications for valves in cryogenic service



PAGE: 22 OF 38


BS 6437 Polyethylene pipes (type 50) in metric diameters for general

purposes

BS 6730 Black polyethylene pipes up to nominal size 63 for above ground

use for cold potable water

BS 6755-1 Testing of valves: Part 1: Specification for production pressure

testing requirements

BS 6755-2 Testing of valves: Part 2: Specification for fire-testing

requirements

BS 7281 Polyethylene pipes for the supply of gaseous fuels

4.0 Document Scope

This specification describes piping material requirements for all process and utility piping systems above and below ground, listed in the Piping Service Index, for the FEED phase of Qusahwira Phase II Development.

4.1 Purpose of This Specification

This Specification defines, by the Piping Class, the material requirements for pipe, fittings, branch connections, flanges, line blinds, bolts, gaskets, and valves for each listed service, and defines the pressure / temperature limitations within which they shall be used.

Other piping components and in-line components such as strainers, hoses and hose couplings, special fittings, etc., which are defined on Process Data Sheets, shall only be used within the constraints of the Piping Classes to which they are assigned. Control valves, choke valves, safety valves, tubing, thermo wells and orifice flanges shall also be used according to the assigned Piping Classes. This specification shall be used for piping designed to ASME B31.3., latest edition. This specification does not apply to pipeline and instrumentation piping. This specification supplements the codes listed under clause 2.0.

4.2 Conflict of Information / Order of precedence:

In case of conflicting requirements amongst any of the specified standards, the standard having the most stringent requirement shall be governing. Contractor shall notify the Company of any apparent conflict between this specification, the related data sheets, the Codes and Standards and any other specifications noted herein. Resolution and/or interpretation precedence shall be obtained from the Company in writing before proceeding



PAGE: 23 OF 38


with the design, manufacture or purchase. However, Company’s interpretation shall be final.

In the case of conflict between documentation, the following order of precedence shall apply:

• The Laws, Standards and Regulations of United Arab Emirates.

• This Project Specification.

• Project Specifications and Data Sheets.

• ADCO Developed Standards. (ADS)

• ADCO Amendments and supplements to Shell DEPs.

• Shell DEPs (v.37) and MESC 12.0 (MESC buying description)

• International Oil & Gas Industry Codes, Standards and Recommended practices (as

agreed with ADCO where none of the above are relevant).

• International oil and gas industry good practise.

5.0 SPECIFICATION DEVIATION / CONCESSION CONTROL

Official review and approval from the COMPANY (through concession request format) shall be obtained for any technical deviations to the Specifications and its attachments including, but not limited to, the Data Sheets and Narrative Specifications, prior to implementation of any proposed changes.

Technical changes implemented without COMPANY approval shall be rejected.

6.0 QUALITY ASSURANCE / QUALITY CONTROL

The EPC CONTRACTOR / Vendor shall operate a quality system to ensure that requirements of the standard ISO 9001 are achieved. All Manufacturers / Vendors shall be certified to ISO 9001-2008 and shall submit a copy of their certification.

The EPC CONTRACTOR / Vendor shall identify in documents to its suppliers and sub-contractors all applicable QA/QC requirements imposed by COMPANY, and shall ensure compliance. Manufacturer / Vendor shall provide objective evidence of its QA/QC surveillance for all levels of its activity.



PAGE: 24 OF 38


7.0 UNITS OF MEASURE

All pipe sizes are designated as nominal pipe sizes (NPS) only. Wall thickness is specified as schedule number (SCH). If schedule number is not available then thickness is indicated in MM. For Stud Bolts & Nuts, diameter is specified in inch & length in MM.

The following range of nominal pipe sizes are used in piping classes:

NOMINAL PIPE SIZE INCH EQUIVALENT TO METRIC

½ DN 15

¾ DN 20

1 DN 25

1½ DN 40

2 DN 50

3 DN 80

4 DN 100

6 DN 150

8 DN 200

10 DN 250

12 DN 300

14 DN 350

16 DN 400

18 DN 450

20 DN 500

24 DN 600

26 DN 650

28 DN 700

30 DN 750

36 DN 900

42 DN 1050

48 DN 1200



PAGE: 25 OF 38


8.0 SELECTION OF PIPING CLASSES / PIPING CLASS IDENTIFICATION

Piping classes for exploration and production are contained in DEP 31.38.01.15-Gen.

Project specific piping classes have been created based on derived piping classes and given a suffix to distinguish it from the DEP piping class from which it is derived.

The numbering of the project piping classes has been based on Shell DEP 31.38.01.10-GEN, which is further explained as noted below:

A) For ASME Classes up to 2500 lb rating

The piping class number is comprised of three parts

Part 1: First two digits indicate the ASME rating class as follow

01 = 150 lb

03 = 300 lb

06 = 600 lb

09 = 900 lb

15 = 1500 lb

25 = 2500 lb

Part 2: The third digits indicate the Materials as follow

1000 - for carbon steel

2000 - for low and intermediate alloy steels

3000 - for stainless steel

4000 - for aluminium and aluminium alloys

5000 - for copper and copper alloys

6000 - for nickel, nickel base alloys

7000 - for non-metallic material

8000 - for carbon steel with internal FBE Coating, galvanised carbon

Part 1 Part 2 Part 3

2 5 1 0 1 1 X



PAGE: 26 OF 38


steel and Super Duplex stainless steel.

The next three digits are for identification and have no specific meaning. Part 3: Piping class with last digit “X”,”Y” and ”Z” indicate minor modification or deviation from original shell DEP piping classes which are used to differentiate pipe classes with different Pressure, Temperature, Corrosion Allowance, Size, Service, Schedule… ‘X’ is the firstly used for Pressure or temperature changes and subsequently ‘Y’ & ‘Z’ for more changes like Corrosion Allowance, Size, Service, and Schedule. “U” indicates a piping class for underground services.

Note: i.e. 011440X is a 150# Carbon steel spec which is made from DEP spec 11440 with Temperature range change from the original DEP Spec.

B) API classes up to 20000 lb rating

The specification / piping classes shall consist of 4 alpha numerals.

The first place shall indicate the letter corresponding to pressure rating as below:

I - 2000 PSI

H - 3000 PSI

J - 5000 PSI

K - 10000 PSI

L -15000 PSI

M - 20000 PSI

The second place shall indicate the letter corresponding to the material as follows:

A: Carbon steel (sour service)

B: Carbon Steel (non sour service)

C: Stainless steel (316L)

D: R.T.R.P. (reinforced Thermosetting Resin Pipe)

F: Cement lined carbon steel

G:Carbon Steel (Low Temp, Sour Service)

The last two digits shall indicate the sequential number starting with 10. (i.e. JA10, etc)



PAGE: 27 OF 38


8.1 Piping Class Summary

The summary of piping classes applicable for the project is given in Appendix - 1.The Detailed Project Piping Classes are given in Appendix - 2.The material of Construction for Valves is given in Appendix - 3.

PIPING CLASS CROSS REFERENCE LIST PROJECT PIPING CLASS BASED ON SHELL PIPING CLASS

011412Z 11412

011440U 11412

011440Y 11440

011440Z 11440

011441X 11441

011502U 11502

011502Z 11502

011503Z 11503

013411Z 13411

013421X 13421

016620X 16620

017011U NO COMPARABLE CLASS

017015U 17015

018011X 18011

018220X NO COMPARABLE CLASS

031440U 31440

031441X 31441

031503Z 31503

033421X 33421

036620X 36620


061412Z 61412

061440Y 61440

061440U 61440



PAGE: 28 OF 38


061502Z 61502

063451Z 63451


091440U 91440

091441X 91441

091502Z 91502

093411Z 93411

093451Z 93451


151440Y 151440

151441X 151441

151502Z 151502

153451Z 153451


251440U 251440

251503Z NO COMPARABLE CLASS




JA10 NO COMPARABLE CLASS

9.0 GENERAL REQUIREMENTS

9.1 The Pressure and temperature service limits shown in each piping class are the design limitations based on ASME B16.5/ B16.47 or ASME B16.34 whichever is lower and also the limitations imposed by the maximum allowable stress of Bolting Material, which shall not be exceeded. Pipe wall thicknesses shown in each class are based on these values.

9.2 Line sizes of 1¼ inches, 2½ inches, 3½ inches and the odd numbered sizes like 5 inches, 7 inches, etc., shall not be used.

Note: Where equipment is supplied with non-standard nozzle sizes, these shall be adjusted to a standard size by means of a reducing fitting immediately adjacent to the equipment. The non-standard adapter component shall be supplied by the Equipment manufacturer. Wall thicknesses of such fittings shall be as per the next standard size up.



PAGE: 29 OF 38


9.3 Postweld Heat Treatment shall be in accordance with the requirements of the applicable ASME Piping Code, DEPs and as summarized in Appendix-1. For carbon steel piping in sour service, the requirement of clause 7.3.3 of NACE MR 0175 / ISO 15156-2 shall be fulfilled for all the Welds. Additionally for C.S Pipe exceeding 19.05 mm wall thickness, PWHT is required as ASME B31.3.

Welds requiring Postweld Heat Treatment shall be prefabricated as much as possible, minimizing field welds.

9.4 For fabricated pipe spools, post weld heat treatment shall be in accordance with ASME B31.3, para 331 and Table 331.1.1. Pipe work shall be fabricated in accordance with ADCO amendment / supplement to SHELL DEP 31.38.01.31 – Gen. “Shop and Field Fabrication for Steel Piping”.

9.5 NDE requirements for fabrication shall be in accordance with ADCO doc no 31.38.01.31-A –amendments to Shell DEP 31.38.01.31 - Gen. and as summarised in Appendix-1. The requirements of Charpy-V impact testing for piping materials shall be in accordance with Shell DEP 30.10.02.31 - Gen.

9.6 Butt-weld joints shall be used for all sizes, except where socket welded joints are prescribed in the relevant piping class.

9.7 Threaded Piping

Threaded piping is not allowed for process lines, except for instrument connection after the primary block valves. Drain / vent connections in process services shall have flanged valve and blind flange. Requirement of double block and bleed shall be as specified in Shell DEP 31.38.01.11–Gen. “Piping General Requirement”, and ADCO Document No. 30.99.00.0044. For hydrostatic vent and drain connections without valves, flange and blind flange to be used for process service. No threaded piping to be used except in galvanised piping.

Threaded piping shall be assembled with sufficient unions to allow disassembly for maintenance, however, unions shall be held to a minimum.

Threads - NPT pipe threads in accordance with ASME / ANSI B1.20.1 shall be used for all threaded joints in piping systems.



PAGE: 30 OF 38


9.8 For general piping information and requirements for specific services refer to Shell DEP No. 31.38.01.11-Gen. “Piping – General Requirements”.

9.9 Hydrocarbon service includes Crude oil, C1-C4, paraffin, fuel gas, gasoil, isopentane, pentane, toluene and xylene.

9.10 ADCO Doc. No.30.99.12.0024/ 30.78.12.0666/ ISO 14692 and SHELL DEP 31.40.10.19 shall be applicable for GRE piping systems.

9.11 Assigning MESC Numbers to Piping Components:

MESC Numbers have been allocated for piping components which are same as given in comparable DEP piping classes or available in MESC Catalogue 12.0

9.12 Any MESC numbers not allocated during the FEED shall be allocated by EPC contractor in consultation with ADCO.

9.13 For site and environment design conditions refer project specification No. 58.99.00.0601.

10.0 MATERIALS FOR SOUR SERVICE

10.1 All materials for Piping Classes designed as sour service shall fully meet the requirements of NACE MR0175 and ISO 15156 (latest revision) with the additional requirements of DEP and MESC Specifications.

Sour Service material shall conform to DEP 31.22.20.31. In sour service, HIC testing is required for all CS and LTCS welded pipe fabricated out of plates. Seamless Piping in sour service should not exceed 0.01% sulphur level, otherwise HIC testing is required as per NACE MR0175/ISO15156. If CRA cladding is applied to base metal by explosive weld bonding or weld cladding, HIC quality and tested plate is not required but SSC-resistant quality plate is required.



PAGE: 31 OF 38


10.2 All chemical restrictions, carbon content, sulphur content, carbon equivalent (CE) shall be in accordance with the additional requirements for MESC specification unless otherwise amended by project specifications.

10.3 All casting and forging shall be in the normalized or quenched and tempered condition.

10.4 Cast iron shall not be used in hydrocarbon service.

10.5 All weldable stainless steel piping shall be supplied with dual certification.

10.6 Hardness Testing

The maximum hardness limit of 248 HV10 in the parent material is acceptable provided the pipe manufacturer demonstrates during the weldability tests that the hardness in the weld and the heat affected zone including the values within 0.5mm from the fusion line do not exceed 248 HV10.



PAGE: 32 OF 38


11.0 REQUIREMENTS FOR PIPE

11.1 Dimensions of Carbon Steel / Stainless Steel / Alloy Steel pipe shall comply with ASME B36.10M or B36.19M as applicable.

11.2 All pipes shall be supplied in double random lengths (11 to 13m) for pipe sizes 3” to 36”, and in single random lengths (5 to 7m) for pipe sizes 2” and smaller, unless otherwise stated in the material requisition scope of supply.

11.3 API-5L Gr. B non-cold expanded, fully killed seamless pipe and ASTM A106 Gr. B pipes are acceptable substitutes for each other.

11.4 For piping classes indicated as Sour Service, all materials shall be in accordance with the requirement of NACE MR0175 /ISO 15156(latest).

11.5 The materials, manufacture, dimensional details, and tolerances of 90/10 Cu-Ni piping items shall be to Standard “Engineering Equipment and Materials Users Association (EEMUA)”.

11.6 GRE (RTRP) piping within the main process area shall be with bell and spigot ends. GRE (RTRP) piping outside the main process area shall be with threaded ends. Joints for threaded ends piping shall be of type that doesn’t require anchors to remain pressure tight.

11.7 GRE (RTRP) piping shall be as per Shell DEP 31.40.10.19-Gen. “GRP Pipelines and Piping Systems” and ADCO Document 30.99.12.0024 “Amendments/ Supplements to Shell DEP 31.40.10.19-Gen.”

11.8 Swaged nipple fittings shall not be used on this project.

11.9 For metallic pipe, reference shall be made to Shell DEP 30.10.02.11-Gen.

11.10 Pipe wall thickness shall be calculated in accordance with the requirements of ASME B31.3 section 304.

11.11 All pipe wall thicknesses specified in individual pipe classes are suitable for the full range of pressure / temperature combinations tabulated.

11.12 Minimum wall thickness is determined after incorporating the following reductions:

• Corrosion Allowance • Mill Tolerance • Threading Allowance, where applicable, in accordance with ASME B1.20.1 (NPT), refer

to Shell DEP 31.38.01.11-Gen.



PAGE: 33 OF 38


11.13 Minimum pipe size shall be ¾” (20mm) unless stated otherwise in the individual piping classes. Smaller sizes may be permitted for instrument connections and steam tracing, etc., only where specifically stated. In pipe classes with 6mm CA in CS, minimum pipe sizes shall be 2 inch. All screwed connections shall have taper threads in accordance with ASME B1.20.1(NPT) and limited to 2 inch or less unless specifically required in large sizes as determined in piping class.

11.14 For all SS, SDSS, Nickel copper and CRA materials of Alloy 825 and 625, PMI (Positive Material Identification) shall be applied prior to shipment from manufacturers/ stockists yard.

12.0 REQUIREMENTS FOR FITTINGS

12.1 All forged fittings shall be normalized.

12.2 Buttweld elbows shall be long radius type as per ASME B16.9. Short radius elbows shall be treated as special fittings and their usage shall be subject to approval by ADCO on a case to case basis. Pipe bends shall not be used, unless approved by ADCO.

12.3 Mitered elbows shall not be used.

12.4 The use of eccentric buttweld reducers shall be kept to an absolute minimum. Eccentric swaged nipple shall not be used in any case.

12.5 Bull plugs 1” and smaller shall be solid steel plugs.

12.6 Unions may only be used where indicated in the piping classes, and kept to a minimum. They shall not be used in:

• Hydrogen service • Process service • Steam service • Systems Class 600 and above • Where design temperatures are above 2300 C • Toxic and highly corrosive fluids • Low temperature service



PAGE: 34 OF 38


12.7 90° angle branch connections shall be as defined in the branch connection tables within individual piping class. Branch connections other than 90° angle, especially for relief systems, shall be provided with reinforcement pads as per ASME B31.3 code requirements and relevant calculations shall be submitted for ADCO’s approval.

12.8 Socket-Welding Fittings are not allowed.

12.9 Flanged thermowell are suitable for run pipe DN 80 (NPS 3) and larger and shall be selected as per Shell DEP 31.38.01.11-Gen clause 3.16.

12.10 Flangolet connection shall be used for thermowells irrespective of Branch Connection table.

13.0 REQUIREMENTS FOR FLANGES

13.1 All forged carbon steel flanges shall be normalized.

13.2 Flange sizes 24” and smaller shall be as per ASME B16.5. Flanges larger than 24” shall be manufactured per ASME B16.47 Series A. API rated flanges shall be as per API 6A type 6B/ 6BX.

13.3 Slip on flanges should not be used in place of weld neck flanges unless approved by ADCO.

13.4 Raised face flanges shall have smooth finish giving roughness of Ra 3.2 to 6.3µm and Flat face flanges shall have a stock finish giving roughness of Ra 6.3 to 12.5µm, in accordance with ASME B46.1.

13.5 Flat face flange shall only be used to match “FF flanges of equipment, or Galvanized, Cu-Ni, FBE and GRE piping”

13.6 Flange bores shall match corresponding pipe inside diameters.

13.7 All welded end closures shall be blind flanged unless otherwise specified

13.8 Spectacle Blinds

Spectacle blinds (figure-8), spades and spacers shall be in accordance with std. Dwg’s S 38.011, S 38.042 and S 38.043.

The non-installed item shall be protected against corrosion and be stored.

Spectacle blinds shall be used for sizes as indicated below:



PAGE: 35 OF 38


ASME class 150 DN300 and smaller






Spades and spacers shall be used for all other sizes.

Jack screw flanges shall not be used.

13.9 Care shall be exercised where mating to, or replacing, existing installations. In these cases the Flange standard and rating shall be ascertained from Site supplied data.

13.10 Socket-Welding-Flanges are not allowed.

14.0 REQUIREMENTS FOR GASKETS

14.1 Full face gaskets shall be used in all flat faced flanged joints. Gaskets for raised face and ring type joints shall be in accordance with the relevant piping class herein. Spiral wound gasket with 4.5 mm thickness shall be used for raised face flanges in all sizes in pipe classes from Class 150 to Class 2500.

14.2 The use of compressed asbestos fibre gaskets as a jointing material or asbestos in any valve packing is strictly prohibited.

15.0 REQUIREMENTS FOR BOLTING

Unless indicated otherwise, bolt diameters shall be in accordance with ASME B16.5 (for flanges 24” and smaller) and ASME B16.47 Series A / MSS SP 44 (for flanges 26” and larger).

Bolting and screw threads shall be UNC for 1” and smaller diameters and 8 UN for large diameters, Class 2 fit, in accordance with ASME B1.1.

Stud bolts shall be threaded full length. The length shall be the effective thread length, excluding end points.

Bolt tensioning using proprietary equipment, shall be used as per the requirements of SHELL DEP 70.08.10.11.Gen Appendix 4 and 31.38.01.11. Gen Clause 3.11.



PAGE: 36 OF 38


N.B. Bolt tensioning requires additional bolt length and in such cases, the bolt length shall be increased by the thickness of an additional nut to facilitate attachment of bolt tensioning equipment.

Bolt tensioners shall be used for all bolts 1 1/2” diameter and larger, and in such cases the bolt length shall be increased by the thickness of an additional nut.

Extra bolt lengths shall also be considered for flange insulation sets.

15.1 All carbon steel bolts and Alloy steel bolts (as per clause 4.5 of ADCO Std ES 30.99.00.0102-1) and nuts shall be coated with Takecoat 1000 and Xylan 1070.

16.0 REQUIREMENTS FOR VALVES

For specific requirement for valves, see Appendix 3, respective valve datasheets and Specification for valve. All valve special features are described in valve specification and Valve data sheets.

Valve Data sheets and Specification of valves document numbers and descriptions are as follow:

• Specification for valves Document no: 58.99.12.0608

• Data Sheet for Gate Valves Document no: 59.99.18.0601

• Data Sheet for Globe Valves Document no: 59.99.18.0602

• Data Sheet for Check Valves Document no: 59.99.18.0603

• Data Sheet for Ball Valves Document no: 59.99.18.0604

• Data Sheet for Butterfly Valves Document no: 59.99.18.0605

• Data Sheet for Needle Valves Document no: 59.99.18.0607

• Data Sheet for Double Block and Bleed Valves Document no: 59.99.18.0608

16.1 Materials

16.1.1 Material of construction for valves shall be as specified in Appendix-3 (Short

description is given in individual piping classes).

16.1.2 For Piping Classes with an existing comparable DEP class, Valve Materials in

Appendix 3 shall govern over the materials indicated in the MESC datasheet.

16.1.3 In addition to the requirements given in Appendix-3, the requirements of

materials shall be as per MESC specification SPE 77/302.



PAGE: 37 OF 38


16.1.4 Low Temperature (LT) steels requirement shall be as per Appendix-1 of Shell

DEP 30.10.02.11-Gen. and Shell DEP 30.10.02.31-Gen. for metallic materials prevention of

brittle fracture.

16.1.5 All materials and fabrication for sour service shall comply with NACE standard MR0175 and ISO 15156 (latest edition).

17.0 MISCELLANEOUS REQUIREMENTS

Seal welding of threaded connections is prohibited.

18.0 PAINTING AND COLOUR CODING

Painting and color coding shall be in accordance with the project specification and Shell DEP 30.48.00.31.Gen Shell DEP V.37.

19.0 GENERAL NOTES

Suffix for additional sizes to line class 091441X to be verified by EPC contractor.



PAGE: 38 OF 38


APPENDIX – 1

Piping Class Index



PAGE: 1 OF 5


ADCO DOCUMENT NO. 58.99.12.0603 APPENDIX 1,REV 1

2 of 5

Material Class Services Design Code Size range ASME Class & Facing

Corrosion Allowance Pressure (barg) Temp (oC) Pipe Fittings Flanges Mat Grp PWHT RT (2) MT (3) PT (4) Remarks Notes

011412Z

Drain (D)Diesel Fuel (DF)

Instrument Air (IA)Nitrogen (NN)Vent Gas(VG)

ASME B31.3 DN 15-750 150 RF 1 mm 19.6 to 15.8 0 to 150

A106 Gr. B upto 4"

API 5L Gr B 6" to 24" &

A672-C65 Cl.22 26" &

above

A234 WPB UPTO 24"

&A234 WPB -

W 26" & above

A105N 1.1 NO 20% 20%

011440UDrain(D)

Process Drain (BD) ASME B31.3 DN 25-200 150 RF 3 mm 19.6 to 12.1 0 to 250 A106 Gr. B A234 WPB A105N 1.1 YES 20% 20% Sour Service (1)(5)(5A)(13)

011440YAquifer Water (AW)

Drain (D)Injection water(IW) ASME B31.3 DN 15-100 150 RF 6 mm 19.6 to 17.7 0 to 100 A106 Gr. B A234 WPB A105N 1.1 YES 20% 20% Sour Service (1)(5)(5A)

011440Z VentGas (VG) ASME B31.3 DN 15-600 150 RF 3 mm 19.6 to 12.1 0 to 250 A106 Gr. B A234 WPB A105N 1.1 YES 20% 20% Sour Service (1)(5)(5A)

011441XTundish Drain (D)Process Oil (PO) ASME B31.3 DN 15-400 150 RF 3 mm 19.6 to 15.8 0 to 150 A106 Gr. B A234 WPB A105N 1.1 YES 20% 20% Sour Service (1)(5)(5A)

011502U Glycol Drain (D) ASME B31.3 DN 50-200 150 RF 3 mm 19.6 to 12.44 -45 to 240 A333 Gr 6 A420 WPL6 A350 LF2 1.1 YES 20% 20% Sour Service (1)(13)

011502Z

Vent Gas (VG)Glycol Drain(GD)

Glycol(GL)Hydro Carbon Condensate

(HC)Nitrogen(NN)

ASME B31.3 DN 15-750 150 RF 3 mm 19.6 to12.44 -45 to 240

A333 Gr 6 upto 24" &

A671-CC 65 Cl.22 26" &

above

A420 WPL6 UPTO 24"

& A420 WPL6-

W 26" & above

A350 LF2 1.1 YES 20% 20% Sour Service (1)(5)(5A)(10)

011503ZVent Gas (VG)Nitrogen(NN)

Process oil(PO)Drain(D)

ASME B31.3 DN 15-1050 150 RF 3 mm 19.6 to 12.1 -45 to 250

A333 Gr 6 upto 24" &

A671-CC65 CL.22 for 26"

& above

A420 WPL6 UPTO 24"

& A420 WPL6-

W 26" & above

A350 LF2 1.1 YES 20% 20% Sour Service (1)(5)(5A)(10)

013411Z

Scale Preventative (SZ)Corrossion Inhibitor (IZ)

Bactericide (BZ)Deoiler (LZ) ASME B31.3 DN 15-150 150 RF 0 mm 19.0 to 15.5 -20 to 125 A312 TP316L A403 WP316L A182 F316 2.2 NO N/A N/A

013421X

Vent Gas (VG)Scale Preventative (SZ)Corrossion Inhibitor (IZ)

Bactericide (BZ)Deoiler (LZ)


A312 TP316L Upto 8" &

A358 Gr.316L CL1 for 42"

A403 WP316L Upto 8" &

A403 WP316L-W for 42"

A182 F316 2.2 NO 10% 10% Sour Service (1)(7)

016620XProcess Oil (PO)

Produced Water (PW)Nitrogen(NN)

Produced Water (PW)

ASME B31.3 DN 15-400 150 RF 0 mm

For DN 15 to 150Pressure 20 to 15.8

For DN 200 to 400 Pressure 19.6 to15.8

-45 to 150

ASTM B423 UNS N08825

upto 6"& A333 Gr.6

Clad with Alloy 825 for 8" to

16"

ASTM B366 WPNICMC upto 6" &

A420 WPL6 Clad with Alloy

825 for8" to 16"


upto 6" & A350 LF2


16"

1.1 (Base metal) / 3.8 (Alloy 825)

NO 100% 100% Sour Service (1)

017011U Drain (D)

Tundish Drain (D)Process Oil(PO)

Sewage Drain (SD)

ASME B31.3 DN 80-600 150 FF 0 mm 20 to 17.51 0 to 105GRE Aromatic

Amine GRE Aromatic Amine

GRE Aromatic Amine

N/A N/A N/A N/A N/A Sour Service (17)

017015U FireWater(FW)Potable Water (DW) ASME B31.3 DN 50-400 150 FF 0 mm 19.6 TO 18.15 0 TO 85

GRE Aliphatic Amine GRE Aliphatic

AmineGRE Aliphatic

AmineN/A N/A N/A N/A N/A (17) (11)

018011X

Potable Water (DW)Instrument Air (IA)

Plant Air (PA)Raw Water (RW)

ASME B31.3 DN 15-200 150 FF 0 mm 19.6 to 18.15 0 to 85

0.5" to 2" API 5L Gr B -

Galvanised &3" to 8" API 5L

Gr B FBE Coated

0.5"-2" A105N Galvanized & 3"-8" A 234-WPB with

FBE Internal Coating

0.5"-2" A105N Galvanized & 3"-8" A 105N

with FBE Internal Coating

1.1 NO For 3" and above : 10%

For 3" and above : 10% A/G Service (11)

FEED FOR QUSAHWIRA PHASE II DEVELOPMENT PROJECTPiping Class Index

Materials Design Conditions NDE Req'd


3 of 5





018220X

Process Gas (PG)Vent Gas (VG)

Process Drain (BD)Tundish Drain (D)

Fuel Gas (FG)Drain (D)

Glycol (GL)Process oil (PO)


A790 UNS S32750 upto 12" & for 14" and above

ASTM A790-UNS S32750 Welded with 100% x-ray

A815 WPS32750

upto 12" & for 14" and above ASTM A815

WPS32750 Gr WP-WX32750

100% RT

A182 F53 2.8 NO 100% 100% Sour Service (1)

031440U Process Drain (BD) ASME B31.3 DN 25-300 300 RF 3 mm 51.1 to 45.1 0 to 150 A106 Gr. B A234 WPB A105N 1.1 YES 20% 20% Sour Service (1)(5)(5A)(13)

031441XDrain (D)

Process Oil (PO)Vent Gas (VG)Nitrogen (NN)

ASME B31.3 DN 15-700 300 RF 3 mm 51.1 to 45.6 0 to 135

A106 Gr. B upto 24"

&A672-C65

Cl.22 26" & above

A234 WPB upto 24" &

A234 WPB-W 26" & above

A105N 1.1 YES 20% 20% Sour Service (1)(5)(5A)

031503Z Vent Gas (VG)Process Oil (PO) ASME B31.3 DN 15-200 300 RF 3 mm 51.1 to 44.3 -45 to 180 A333 Gr 6 A420 WPL6 A350 LF2 1.1 YES 20% 20% Sour Service (1)(5)(5A)

033421X Vent Gas (VG) ASME B31.3 DN 15-150 300 RF 0 mm 49.6 to 35.5 -100 to 205 A312 TP316L A403 WP316L A182 F316 2.2 NO 10% 10% Sour Service (1)(7)

036620X Produced Water (PW) ASME B31.3 DN 15-600 300 RF 0 mm

For DN 15 to 150Pressure 51.7 to 51.5

For DN 200 to 600Pressue 51.7 to 46.6

-45 to 100


upto 6"& A333 Gr.6


24"

ASTM B366 WPNICMC upto 6" &

A420 WPL6 Clad with Alloy

825 for8" to 24"


upto 6" & A350 LF2


24"

1.1 (Base metal) / 3.8 (Alloy 825)

NO 100% 100% Sour Service (1)

038220X

Produced Water(PW)Process Gas(PG)

Hydrocarbon Condensate(HC)

VentGas (VG)Drain (D)

Process Drain (D)Process Oil(PO)Fuel gas (FG)


A790 UNS S32750 upto 12" & for 14" and above

ASTM A790-UNS S32750 Welded with 100% x-ray

A815 WPS32750

upto 12" & for 14" and above ASTM A815

WPS32750 Gr WP-WX32750

100% RT

A182 F53

2.8 NO 100% 100% Sour Service (1)

061412Z Glycol (GL) ASME B31.3 DN 15-100 600 RF 1 mm 102.1 to 90.2 0 to 150 A106 Gr. B A234 WPB A105N 1.1 NO 100% 100%

061440Y Aquifer Water (AW) ASME B31.3 DN 15-200 600 RF 6 mm 99.6 to 93.2 0 to 100 A106 Gr. B A234 WPB A105N 1.1 YES 100% 100% Sour Service (1)(5)(5A) 061440U Process Drain (BD) ASME B31.3 DN 25-150 600 RF 3 mm 99.6 to 90.2 0 to 150 A106 Gr. B A234 WPB A105 1.1 YES 100% 100% Sour Service (1)(5)(5A)(13)

061502Z Process Gas (PG) ASME B31.3 DN 15-300 600 RF 3 mm 99.6 to 88.7 -45 to 180 A333 Gr 6 A420 WPL6 A350 LF2 1.1 YES 100% 100% Sour Service (1)(5)(5A)(10)

063451Z

Hydrocarbon Condensate (HC)

Bactericide (BZ)Corrossion Inhibitor (IZ)

Demulsifier(DZ)

ASME B31.3 DN 15-100 600 RF 0 mm 99.3 to 73.6 -101 to 180 A312 TP316L A403 WP316L A182 F316 2.2 NO 100% 100% Sour Service (1)

068220X

Process Drain (BD)Glycol (GL)

Process Gas (PG)Hydrocarbon

Condensate (HC)Drain (D)

Vent Gas(VG)

ASME B31.3 DN 15-300 600 RF 0 mm 103.4 to 87.9 -29 to 180 A790 UNS S32750

A815 WPS32750

A182 F53

2.8 NO 100% 100% Sour Service (1)

091440U Process Drain (D) ASME B31.3 DN 25-150 900 RF 3 mm 142.7 to 135.2 0 to 150 A106 Gr. B A234 WPB A105N 1.1 YES 100% 100% Sour Service (1)(5)(5A)(13)

091441XProcess Oil (PO)

VentGas (VG)Drain (D)

Nitrogen(NN)

ASME B31.3 DN 15-600 900 RF 3 mm

DN 15 to 250142.7 to 137.9DN 300 to 350 139.6 to 137.9

0 to 120 A106 Gr. B A333 Gr-6

A234 WPB A420 WPL6 A105N 1.1 YES 100% 100% Sour Service (1)(5)(5A)

091441Y Process Oil (PO) Process Gas (PG) ASME B31.3 DN 15-350 900 RF 6 mm

DN 15 to 250142.7 to 137.9DN 300 to 350 139.6 to 137.9

0 to 120 A106 Gr. B A333 Gr-6

A234 WPB A420 WPL6 A105N 1.1 YES 100% 100% Sour Service (1)(5)(5A)

091502Z Process Gas (PG)Vent Gas (VG) ASME B31.3 DN 15-200 900 RF 3 mm 142.7 to 132.9 -45 to 180 A333 Gr 6 A420 WPL6 A350 LF2 1.1 YES 100% 100% Sour Service (1)(5)(5A)

093411ZCorrossion Inhibitor (IZ)

O2 Scavenger (OZ)Bactericide (BZ)

ASME B31.3 DN 15-50 900 RF 0 mm 148.9 to 121 -20 to 125 A312 TP316L A403 WP316L A182 F316 2.2 NO 100% 100%

093451Z

Process Gas(PG)Hydrocarbon

Condensate(HC)VentGas (VG)

Bactericide (BZ)Corrossion Inhibitor (IZ)

O2 Scavenger (OZ)


A312 TP316L Upto 12" &

A358 Gr.316L.CL1

for 14"

A403 WP316L Upto 12" &

A403 WP316L-W for 14"

A182 F316 2.2 NO 100% 100% Sour Service (1)(7)


4 of 5





098220X ProcessDrain (BD)Drain (D) ASME B31.3 DN 15-100 900 RF 0 mm 155.1 to 131.9 -29 to 180 A790 UNS

S32750 A815

WPS32750A182 F53

2.8 NO 100% 100% Sour Service (1)

151440Y Injection Water (IW) ASME B31.3 DN 15-200 1500 RF 6 mm 219.5 0 to 100

A106 Gr. B upto 6"

A333 Gr 6 8" & above

A234 WPB upto 6",

A420 WPL6 8" & above


151441X Process Oil (PO)

Vent Gas (VG)Nitrogen(NN)

ASME B31.3 DN 15-500 1500 RF Note (15) 3 mm 219.5 0 to 120

A106 Gr. B upto 8", A333 Gr. 6 10" &

above

A234 WPB upto 8",

A420 WPL6 10" & above


151502Z Vent Gas (VG) Process Gas (PG)

ASME B31.3 DN15-100 1500 RF 3 mm 219.5 -45 to 100 A333 Gr. 6 A420 WPL6 ASTM A350 LF2

1.1 YES 100% 100% Sour Service (1)(5)(5A)

153451Z Process Gas (PG)Vent Gas (VG) ASME B31.3 DN 15-200 1500 RF 0 mm 187.3 to 158.8 -101 to 205 A312 TP316L A403 WP316L A182 F316 2.2 NO 100% 100% Sour Service (1)(7)

158220X Drain (D) ASME B31.3 DN 15-200 1500 RF 0 mm228.5 to 219.8 for DN

15 to 80202.9 for DN 100-200

-29 to 180A790 UNS

S32750 A815 WPS32750

A182 F53

2.8 NO 100% 100% Sour Service (1)

251440U Process Drain (BD) ASME B31.3 DN 25-150 2500 RF 3 mm314.9for DN 15-100

&287.7 for DN 150-150

0 to 150 A106 Gr. B A234 WPB A105N 1.1 YES 100% 100% Sour Service (1)(5)(5A)(13)

251503Z

Injection Gas (IG)Process Gas (PG)

Vent Gas (VG)Drain (D)

Raw water(RW)

ASME B31.3 DN 15-250 2500 RF Note (15) 3 mm 388.3 to 363.45 -45 to 205 A333 Gr 6 A420 WPL6 A350 LF2 1.1 YES 100% 100% Sour Service (1)(5)(5A)

253411ZBactericide (BZ)Demulsifier (DZ)

Corrosion Inhibitor (IZ) Methanol (Z)

ASME B31.3 DN 15-50 2500 RF Note (15) 0 mm 351.0 to 336.2 -29 to 125 A312 TP316L A403 WP316L A182 F316 2.2 NO 100% 100%

253451Z

Process Gas(PG)Hydrocarbon

Condensate(HC)VentGas (VG)

Injection Gas (IG)Corrosion Inhibitor (IZ)

Nitrogen(NN)

ASME B31.3 DN 15-200 2500 RF 0 mm

407.9 to 306.6 for noninsulated lines

&321.6 to 306.6 for

insulated lines

-101 to 180 A312 TP316L A403 WP316L A182 F316 2.2 NO 100% 100% Sour Service (1)(7)(9)

258220X Drain (D)Process Drain (BD) ASME B31.3 DN 15-200 2500 RF 0 mm 365.7 -29 to 180 A790 UNS

S32750 A815

WPS32750A182 F53

2.8 NO 100% 100% Sour Service (1)

JA10 Process OIL (PO) ASME B31.3 DN 50-150 API 5000 RTJ 3 mm 345 0 to 93 A106 Gr. B A234 WPB API 60K 1.1 YES 100% 100% Sour Service (1)(5)(5A)(12)

NOTES:1. All materials for Sour Service shall conform to NACE MR0175 & ISO 15156 (Latest)2. RT = Radiographic Testing, applicable to buttwelds only.3. MT = Magnetic Particle Testing, applicable to fillet and branch welds.4. PT = Dye Penetrant Testing, applicable to fillet and branch welds.5. PWHT, if indicated yes, is applicable for wall thickness exceeding 19.05 mm.

5A. Hardness requirements of all welds for carbon steel piping in sour service shall be fulfilled as per clause 7.3.3 of NACE MR0175 part 2.6. Details for material of Valve construction are given in Appendix 3.7. Design minimum temperature is short-term only, during a depressurization event.8. Stainless Steel Material to be Dual Certified 316/316L 9. For Pipe class 253451Z flange assembly bolts for insulated lines shall be A320 L7M & A 194 Gr. 7M 10. Pipe class shall be selected after the review of the Suitablity of intended service to the valve trim as mentioned in Appendix-311. All the ALBR valve to be of 300# Rated for 150# Rated Piping classes.12. Oil & Gas injection well heads RTJ flanges to be used instead of raised face.13. For Underground metallic piping cathodic protection is required.

APPENDIX – 2

Material Class Specifications



PAGE: 1 OF 237


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 011412Z Design limits Temperature (°C) 0 50 75 100 125 150 Pressure (Bar ga) DN 15-750

19.6 19.2 18.4 17.7 16.7 15.8

Notes - -

Intended for Drain, diesel fuel, instrument air, vent gas & nitrogen services. Design limits acc. to ASME B16.5 flange rating up to mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).

- API 5L-B welded pipe (erw and saw) is normally the most economic choice - For bending of pipe see DEP 31.38.01.31-Gen. - For basis of design see DEP 31.38.01.10-Gen. - The use of red. bore ball valves is considered most economical. Use full bore ball valves only when

necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only -

The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality

Table of schedules

DN Schedule 15 80 20 80 25 80 40 80 50 40 80 40

100 40 150 40 200 20 250 20 300 20 350 20 400 20 450 20 500 20 600 650 700 750

20 10 10 10

PIPING CLASS – 011412Z , Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 650 700 750

750 700 650 600

C C C C

C C C C

C C C C

C C C C

E E E E

E E E E

E E E E

E E E E

E E E E

E E E E

B B B B

B B B B

B B B B

B B B B

B B B B

B B B A

B B A

B A

A

500 C C C C E E E E E E B B B B A 450 C C C C E E E E E B B B B A 400 C C C C E E E E E B B B A 350 C C C C E E E E B B B A 300 C C C C E E E B B B A 250 C C C C E E B B B A 200 C C C C E E B B A 150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A

Code Explanation of characters A Equal tee B Reducing tee C Branch fitting D Pipe to pipe E Branch outlet

Carbon steel Plant Qusahwira Phase II FEED Class no. 011412Z Consignee ASME rating CLASS 150 Engineered by SNC Lavalin International Corrosion allowance 1 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395

ADCO DOC.NO.58.99.12.0603,APPENDIX 2, REV 1

ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-100 ASTM A106-B PIWE Pipe (API 5L-B erw) DN 150-500 API 5L-B (erw) PIWS PIPE

Pipe (API 5L-B saw) Pipe

DN 600-600 DN 650-750

API 5L-B (saw) ASTM 672 C65 Cl.22

Flanges BLFL Blind flange DN 15-750 ASTM A105N LJFL Lap joint flange DN 40-40 ASTM A 182 F316 SBFL Spectacle blind DN 15-300 ASTM A516-60/65/70 SPFL Spade DN 15 -750 ASTM A516-60/65/70 SPRT Spacer ring DN 15 -750 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-750 ASTM A105N Fittings CAPB Cap bw DN 15-750 ASTM A234-WPB E45B E45B

Elbow 45 deg bw Elbow 45 deg bw

DN 15-600 DN 650-750

ASTM A234-WPB ASTM A234-WPB-W

E90B E90B TEEB TEEB

Elbow 90 deg bw Elbow 90 deg bw Tee equal bw Tee equal bw

DN 15-600 DN 650-750 DN 15-600 DN 650-750

ASTM A234-WPB ASTM A234-WPB-W ASTM A234-WPB ASTM A234-WPB-W

Reducing fittings ( Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-40 ASTM A105N BNIB Branch fitting bw DN 15-40 ASTM A105N BROB Branch outlet bw DN 150-750 ASTM A105N RECB RECB

Reducer concentric bw Reducer concentric bw

DN 20-600 DN 650-750


REEB REEB

Reducer eccentric bw Reducer eccentric bw

DN 20-600 DN 650-750


TERB TERB

Tee reducing bw Tee reducing bw

DN 20-600 DN 650-750


PIPING CLASS – 011412Z , Page 2 of 5 Valves Data Sheet No. BAFF VF.011412Z.21 BAFF VF.011412Z.22

Ball valve 17292 FB (DN 50) flgd Ball valve 14313 flgd

DN 15-150 DN 200-750

Body: ASTM A105N/A216-WCB/WCC Trim: AISI 316, PTFE Body: ASTM A105N/A216-WCB/WCC Trim: AISI 316, PTFE

BARF VB.011412Z.21 Ball valve 17292 FB (DN 50) flgd DN 15-150 Body: ASTM A105N/A216-WCB/WCC BARF VB.011412Z.22

Ball valve 14313 flgd

DN 200-750

Trim: AISI 316, PTFE Body: ASTM A105N/A216-WCB/WCC Trim: AISI 316, PTFE

CHDF VC.011412Z.23 Check valve dual plate double flgd DN 200 -750 Body: ASTM A216-WCB/WCC Trim: AISI 316, Stellite 6 CHVF VC.011412Z.21 Check valve flgd (Piston lift type) DN 15-40 Body: ASTM A105N/A216-WCB/WCC Trim: AISI 316, Stellite 6 CHVF VC.011412Z.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A105N/A216-WCB/WCC

Trim: AISI 316, Stellite 6 GAVF VG.011412Z.21 Gate valve flgd DN 15-40 Body: ASTM A105N/A216-WCB/WCC Trim: AISI 316, Stellite 6 GAVF VG.011412Z.21 Gate valve flgd DN 50-750 Body: ASTM A105N/A216-WCB/WCC Trim: AISI 316, Stellite 6 GLVF VL.011412Z.21 Globe valve flgd DN 15-40 Body: ASTM A105N/A216-WCB/WCC Trim: AISI 316, Stellite 6 GLVF VL.011412Z.21 Globe valve flgd DN 50- 200 Body: ASTM A105N/A216-WCB/WCC Trim: AISI 316, Stellite 6 NDVF VN.011412Z.21 Needle valve flgd DN 15-15 Body: ASTM A105N/A216-WCB/WCC Trim: AISI 316, Stellite 6 VDBT VDB.011412Z.21 Double block and bleed Valve DN 15-50

Body: ASTM A 105 N Trim: AISI 316, PTFE

Miscellaneous GKSW Gasket spiral wound DN 15-750 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end

flanges ORFS Orifice flange set DN 50-600 ASTM A105N

For DN 50-80 (600 Lbs) For DN 100 & above (300 Lbs)

ST1B Strainer Y-type (1 mm ca) DN 50-400 Sieve: AISI 316L STBT Studbolt with nuts --- ASTM A193-B7/A194-2H


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS-011412Z, Page 3 of 5 PIPING COMPONENTS Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 650 700 750 Item description MESC

Flanges Blind flange 766211 0581 0621 0661 0681 0701 0721 0741 0761 0781 0801 0821 0841 0861 0881 0901 0921 Blind flange 767012 0521 0541 0561 Spectacle blind 768803 0021 0041 0061 0081 0101 0121 0141 0161 0181 0201 0221 Spacer ring 768816 0241 0261 0281 0301 0321 Note1 Note1 Note1 Spade 768813 0241 0261 0281 0301 0321 Note1 Note1 Note1 Welding neck flange 766278 3521 3541 3561 3581 3101 3121 3141 3161 2081 2101 2121 2141 2161 2181 2201 2241 Welding neck flange 767082 Note1 Note1 0151 Lap joint flange 766520 4181 Fittings Cap bw 763019 0181 0241 0301 0381 0551 0751 0951 1151 1321 1521 1721 1921 2121 2321 2551 2751 Note1 Note1 6151 Elbow 45 deg bw 763038 5681 5741 5801 5881 6051 6251 6451 6651 6821 7021 7221 7421 7621 7821 8051 8251 Note1 Note1 8841 Elbow 90 deg bw 763040 5681 5741 5801 5881 6051 6251 6451 6651 6821 7021 7221 7421 7621 7821 8051 8251 Note1 Note1 8621 Tee equal bw 763084 5681 5741 5801 5881 6051 6251 6451 6651 6821 7021 7221 7421 7621 7821 8051 8251 Note1 Note1 1151

Valves Ball valve 14313 flgd 770228 5151 5161 5171 5181 5191 5201 5211 5231 Ball valve 14313 flgd 770228 0171 0181 0191 0201 0211 0231 Ball valve 17292 flgd 770025 5031 5041 5051 5071 5081 5101 5131 Ball valve 17292 flgd 770025 0031 0041 0051 0071 0081 0101 0441 Check valve dual plate double flgd 776711 0151 0161 0171 0181 0191 0201 0211 0231 Check valve dual plate Lug type 771020 0151 0161 0171 0181 0191 0201 0211 0231 Check valve flgd Piston lift type 771013 0031 0041 0051 0071 Gate valve flgd 772020 3031 3041 3051 3071 Gate valve flgd 771020 0151 0161 0171 0181 0191 0201 0211 0231 Globe valve flgd 773014 0031 0041 0051 0071 Globe valve flgd 773020 0091 0101 0121 0141 0151 Needle Valve Flgd NOTE 1 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 3361 3381 3421 Note Meterrun 766496 0521 0541 0561 0581 Orifice flange set 766295 0811 0821 0231 0241 0031 0041 0051 0061 0071 0081 0091 0101 Strainer Y-type (1 mm ca) NOTE1 NOTE1

Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION .

Pipe Pipe 743005 0181 0281 0381 0581 0691 1031 1491 Pipe (API 5L-B erw) 741314 2111 2391 2791 3191 3731 4211 4691 5211 Pipe (API 5L-B saw) 741317 5691 Pipe 743023 Note1 Note1 0371


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCIING /PIPING COMPONENTS Run x Br BROB RECB REEB TERB

20 x 15 7630721371 7630731371 7630890351 25 x 15 7630721471 7630731471 7630890451 25 x 20 7630721571 7630731571 7630890551 40 x 15 7630721671 7630731671 40 x 20 7630721771 7630731771 7630890751 40 x 25 7630721871 7630731871 7630890851 50 x 20 7629461921 7629611921 50 x 25 7630721961 7630731961 7630891091 50 x 40 7630722061 7630732061 7630891181 80 x 40 7630722261 7630732261 80 x 50 7630722351 7630732351 7630891321

100 x 40 7630722501 7630732501 100 x 50 7630722651 7630732651 7630891531 100 x 80 7630722751 7630732751 7630891651 150 x 50 7679008141 150 x 80 7630722951 7630732951 7630891771 150 x 100 7630723051 7630733051 7630891891 200 x 50 7679002741 200 x 80 7679002861 200 x 100 7630723221 7630733221 7630892101 200 x 150 7630723331 7630733331 7630892301 250 x 50 7679002751 250 x 80 7679002871 250 x 100 7629463401 7629613401 7630892581 250 x 150 7630723531 7630733531 7630892761 250 x 200 7630723611 7630733611 7630892891 300 x 50 7679002761 300 x 80 7679002881 300 x 100 7679003001 300 x 150 7630723861 7630733861 7630893151 300 x 200 7630723921 7630733921 7630893261 300 x 250 7630724021 7630734021 7630893481 350 x 50 7679002771 350 x 80 7679002891 350 x 100 7679003011 350 x 150 7679003111 7629466001 7629616001 350 x 200 7630724231 7630734231 7630893881 350 x 250 7630724301 7630734301 7630894131 350 x 300 7630724421 7630734421 7630894391

Comp.name Description BNIF Branch fitting flgd BNIP Branch fitting plain BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw

Run x Br BROB RECB REEB TERB 400 x 50 7679002781 400 x 80 7679002901 400 x 100 7679003021 400 x 150 7679003171 400 x 200 7679001901 7630724541 7630734541 400 x 250 7630724631 7630734631 7630895031 400 x 300 7630724701 7630734701 7630895291 400 x 350 7630724821 7630734821 7630895541 450 x 50 7679002791 450 x 80 7679002911 450 x 100 7679003031 450 x 150 7679003131 450 x 200 7679001911 450 x 250 7630725201 7630735201 7630896021 450 x 300 7630725501 7630735501 7630896261 450 x 350 7630725811 7630735811 7630896501 450 x 400 7630726111 7630736111 7630896741 500 x 50 7679002801 500 x 80 7679002921 500 x 100 7679003041 500 x 150 7679003141 500 x 200 7679001921 500 x 250 7679001991 500 x 300 7630726401 7630736401 7630897461 500 x 350 7630726711 7630736711 7630897701 500 x 400 7630727011 7630737011 7630897941 500 x 450 7630727311 7630737311 7630898181 600 x 50 7679002821 600 x 80 7679002941 600 x 100 7679003061 600 x 150 7679003161 600 x 200 7679001941 600 x 250 7679002001 600 x 300 7630898661 600 x 350 7630898901 600 x 400 7630728811 7630738811 7630899141 600 x 450 7630729111 7630739111 7630899381 600 x 500 7630729411 7630739411 7630899621

650 x 50 NOTE1 650 x 80 NOTE1 650 x 100 NOTE1 650 x 150 NOTE1 650 x 200 NOTE1 650 x 250 NOTE1 650 x 300 NOTE1 650 x 350 NOTE1 650 x 400 NOTE1 650 x 450 NOTE1 NOTE1 NOTE1 650 x 500 NOTE1 NOTE1 NOTE1 650 x 600 NOTE1 NOTE1 NOTE1 700 x 50 NOTE1 700 x 80 NOTE1

PIPING CLASS 011412Z , Page 4 of 5

Run x Br BROB RECB REEB TERB 700 x 100 NOTE1 700 x 150 NOTE1 700 x 200 NOTE1 700 x 250 NOTE1 700 x 300 NOTE1 700 x 350 NOTE1 700 x 400 NOTE1 700 x 450 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 600 NOTE1 NOTE1 NOTE1 700 x 650 NOTE1 NOTE1 NOTE1

750 x 50 NOTE1 750 x 80 NOTE1 750 x 100 NOTE1 750 x 150 NOTE1 750 x 200 NOTE1 750 x 250 NOTE1 750 x 300 NOTE1

750 x 350 NOTE1 750 x 400 NOTE1 750 x 450 NOTE1 750 x 500 NOTE1 750 x 600 NOTE1 NOTE1 NOTE1 750 x 650 NOTE1 NOTE1 NOTE1 750 x 700 NOTE1 NOTE1 NOTE1

Branch Run pipe BNIF BNIP 15 40 - 40 7680370611 7680310361 15 50 - 50 7680370631 7680310371 15 80 - 200 7680370641 7680310381 15 250 - 750 7680370651 7680310391 20 50 - 50 7680370661 7680310401 20 80 - 100 7680370671 7680310411 20 150 - 300 7680370691 7680310431 20 350 - 750 7680370711 7680310441 25 80 - 80 7680370731 7680310451 25 100 - 100 7680370751 7680310461 25 150 - 250 7680370761 7680310471 25 300 - 750 7680370771 7680310491 40 80 - 80 7680370791 7680310511 40 100 - 100 7680370801 7680310521 40 150 - 150 7680370821 7680310531 40 200 - 300 7680370831 7680310551 40 350 - 600 7680370851 7680310571 40 350 - 600 7680370861 NOTE1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138611531 20 4 1/2 x 70 8138611551 25 4 1/2 x 70 8138611551 40 4 1/2 x 80 8138611571 50 4 5/8 x 90 8138612711 80 4 5/8 x 100 8138612731 100 8 5/8 x 100 8138612731 150 8 3/4 x 110 8138613301 200 8 3/4 x 110 8138613301 250 12 7/8 x 120 8138614011 300 12 7/8 x 120 8138614011 350 12 1 x 140 8138614691 400 16 1 x 140 8138614691 450 16 1 1/8 x 150 8138615291 500 20 1 1/8 x 160 8138615301 600 20 1 1/4 x 180 8138615901 650 24 1 1/4 x 230 8138615981 700 28 1 1/4 x 230 Note 1 750 28 1 1/4 x 240 8138616001 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138611641 20 4 1/2 x 120 8138611641 25 4 1/2 x 130 8138611671 40 4 1/2 x 130 8138611671 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138612781 80 8 3/4 x 140 8138613351 100 8 3/4 x 150 8138613371 150 12 3/4 x 150 8138613371 200 12 7/8 x 170 8138614091 250 16 1 x 190 8138614771 300 16 1 1/8 x 210 8138615381 350 20 1 1/8 x 220 8138615401 400 20 1 1/4 x 230 8138615981 450 24 1 1/4 x 250 8138615861 500 24 1 1/4 x 260 8138616031 600 24 1 1/2 x 290 8138617121

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 70 8138611551 20 4 1/2 x 80 8138611571 25 4 1/2 x 80 8138611571 40 4 1/2 x 80 8138611571 50 4 5/8 x 100 8138612731 80 4 5/8 x 110 8138612741 100 8 5/8 x 110 8138612741 150 8 3/4 x 120 8138613321 200 8 3/4 x 130 8138613341 250 12 7/8 x 140 8138614041 300 12 7/8 x 150 8138614061 350 12 1 x 160 8138614721 400 16 1 x 170 8138614741 450 16 1 1/8 x 180 8138615331 500 20 1 1/8 x 200 8138615251 600 20 1 1/4 x 220 8138615971 650 24 1 1/4 x 290 8138616081 750 28 1 1/4 x 310 8138616111

PIPING CLASS-011412Z, Page 5 of 5


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 011440U Design limits Temperature (°C) 0 50 100 125 150 225 250 Pressure (Bar ga) DN 25-200

19.6 19.2 17.7 16.7 15.8 12.9 12.1

Notes - -

Intended for Underground Drain, process drain services. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).

- For bending of pipe see DEP 31.38.01.31-Gen. - For basis of design see DEP 31.38.01.10-Gen. - The use of red. bore ball valves is considered most economical. Use full bore ball valves only when

necessary for process/operating requirements - - -

The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality. Minimum line size for underground buried drain service is DN100. Cathodic Protection is required for buried metallic piping.

Table of schedules

DN Schedule 25 160 40 160 50 80 80 80

100 40 150 40

PIPING CLASS – 011440U , Page 1 of 4 Branch connections 90 degrees Branch Size Run size

25 40 50 80 100 150

150 C C E B B A 100 C C B B A 80 C C B A 50 B B A 40 B A 25 A


Carbon steel Sour Plant Qusahwira Phase II FEED Class no. 011440U Consignee ASME rating CLASS 150 Engineered by SNC Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 25-200

ASTM A106-B

Flanges BLFL Blind flange DN 25-200 ASTM A105N LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 25-200 ASTM A516-60/65/70 WNFL Welding neck flange DN 25-200 ASTM A105N Fittings CAPB Cap bw DN 25-200 ASTM A234-WPB E45B Elbow 45 deg bw DN 25-200 ASTM A234-WPB E90B Elbow 90 deg bw DN 25-200 ASTM A234-WPB TEEB Tee equal bw DN 25-200

ASTM A234-WPB

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-40 ASTM A105N BNIB Branch fitting bw DN 25-40 ASTM A105N BROB Branch outlet bw DN 150-200 ASTM A105N RECB Reducer concentric bw DN 25-200 ASTM A234-WPB REEB Reducer eccentric bw DN 25-200 ASTM A234-WPB TERB Tee reducing bw DN 25-200

ASTM A234-WPB

PIPING CLASS – 011440U , Page 2 of 4 Valves Data Sheet No. BAFF VF.011440Z.21 Ball valve 17292 flgd DN 25-150

Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PEEK

BARF VB.011440Z.21 Ball valve 17292 flgd DN 25-150


BTFF VF.011440Z.22 Ball valve 14313 flgd DN 200-200


BTRF VB.011440Z.22 Ball valve 14313 flgd DN 200-200


CHVF VC.011440Z.21 Check valve (Piston type) DN 25-40

Body: ASTM A216-WCB/WCC Trim: Super Duplex, Stellite 6

CHDF VC.011440Z.22 Check valve dual plate Lug type DN 50-150


CHDF VC.011440Z.23 Check valve dual plate double flanged

DN 200-200 Body: ASTM A216-WCB/WCC Trim: Super Duplex, Stellite 6

GAVF VG.011440Z.21 Gate valve flgd DN 25-200

Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6

GLVF VL.011440Z.21 Globe valve flgd DN 25-200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 VDBT VDB.011440Z.21 Double block and bleed Valve

DN 25-50

Body: ASTM A105N Trim: AISI 316, PEEK

Miscellaneous GKSW Gasket spiral wound DN 25-200 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-200

ASTM A105N

DN 25-80 (600 Lbs) DN 100 & above (300 Lbs)

STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS 011440U, Page 3 of 4PIPING COMPONENTS Nominal pipe size 25 40 50 80 100 150 200 Item description MESC Pipe Pipe 743003 0401 0601 0711 1091 1491 2111 2411 Flanges Blind flange 766211 0661 0681 0701 0721 0741 0761 0781 Lap joint flange 766520 4181 Spectacle blind 768837 0061 0081 0101 0121 0141 0161 0181 Welding neck flange 766278 4061 4081 3601 3621 3141 3161 2581 Fittings Cap bw 763017 5821 5921 6081 6281 6451 6651 6831 Elbow 45 deg bw 763034 5821 5921 6081 6281 6451 6651 6831 Elbow 90 deg bw 763042 5821 5921 6081 6281 6451 6651 6831 Tee equal bw 763081 5821 5921 6081 6281 6451 6651 6831 Valves Ball valve 17292 flgd 770025 5051 5071 5081 5101 5131 Ball valve 17292 flgd 770025 0051 0071 0081 0101 0441 Ball valve 14313 flgd 770067 5151 Ball valve 14313 flgd 770067 5151 Check valve dual plate double flgd 776716 0151 Check valve dual plate Lug type Check valve flgd Piston lift type

NOTE 1 NOTE 1

Gate valve flgd 772004 0051 0071 0081 0101 0121 0141 0151 Globe valve flgd 773005 0051 0071 0081 0101 0121 0141 0151 Double block and bleed Valve NOTE 1

Miscellaneous Gasket spiral wound 854136 3081 3121 3141 3181 3201 3241 3261 Meter run 766496 0561 0581 Orifice flange set 766295 1051 1061 0231 0241 0131 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION .


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS 011440U, Page 4 of 4 REDUCING/ PIPING COMPONENTSRun x Br BROB RECB REEB TERB

40 x 25 7630661911 7630671911 7630880891 50 x 25 7630661991 7630671991 7630881111 50 x 40 7630662081 7630672081 7630881201 80 x 40 7630662291 7630672291 80 x 50 7630662371 7630672371 7630881331

100 x 40 7630662521 7630672491 100 x 50 7630662661 7630672661 7630881571 100 x 80 7629472751 7629622701 7630881691 150 x 50 7679010641 150 x 80 7630662961 7630672961 7630881811 150 x 100 7630663051 7630673051 7630881891 200 x 50 7679012631 200 x 80 7679012751 200 x 100 7630663241 7630673241 7630882111 200 x 150 7630663341 7630673341 7630882311

Comp.name Description BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw

BOLTING Boltset standard flange DN nr inch x mm MESC number 25 4 1/2 x 70 8138661551 40 4 1/2 x 80 8138661571 50 4 5/8 x 90 8138662711 80 4 5/8 x 100 8138662731 100 8 5/8 x 100 8138662731 150 8 3/4 x 110 8138663301 200 8 3/4 x 110 8138663301 Boltset meter run DN nr inch x mm MESC number 25 4 1/2 x 130 8138661661 40 4 1/2 x 130 8138661661

Boltset orifice flange DN nr inch x mm MESC number 80 8 3/4 x 140 8138663351 100 8 3/4 x 150 8138663371 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091

Boltset blind/spacer DN nr inch x mm MESC number 25 4 1/2 x 80 8138661571 40 4 1/2 x 80 8138661571 50 4 5/8 x 100 8138662731 80 4 5/8 x 110 8138662741 100 8 5/8 x 110 8138662741 150 8 3/4 x 120 8138663321 200 8 3/4 x 130 8138663341

Branch Run pipe BNIF BNIP 25 80 - 200 7680370281 7680310221 40 80 - 80 7680370321 7680310251 40 100 - 200 7680370321 7680310251


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 011440Y Design limits Temperature (°C) 0 50 75 100 Pressure (Bar ga) DN 15- 100

19.6 19.2 18.4 17.7

Notes - -

Intended for aquifer water & Drain services, Injection water. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).




Table of schedules

DN Schedule 15 XXS 20 XXS 25 XXS 40 XXS 50 160 80 80

100 80

PIPING CLASS – 011440Y , Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100

100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A


Carbon steel Sour Plant Qusahwira Phase II FEED Class no. 011440Y Consignee ASME rating CLASS 150 Engineered by SNC LAVALI INTERNATIONAL Corrosion allowance 6 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395



ASTM A106-B

Flanges BLFL Blind flange DN 15-100 ASTM A105N LJFL Lap joint flange DN 50-50 ASTM A182 F316 SBFL Spectacle blind DN 15-100 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-100

ASTM A105N

Fittings CAPB Cap bw DN 15-100 ASTM A234-WPB E45B Elbow 45 deg bw DN 15-100 ASTM A234-WPB E90B Elbow 90 deg bw DN 15-100 ASTM A234-WPB TEEB Tee equal bw DN 15-100

ASTM A234-WPB

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-50 ASTM A105N BNIB Branch fitting bw DN 15-40 ASTM A105N RECB Reducer concentric bw DN 20-100 ASTM A234-WPB REEB Reducer eccentric bw DN 20-100 ASTM A234-WPB TERB Tee reducing bw DN 20-100

ASTM A234-WPB

PIPING CLASS – 011440Y , Page 2 of 5 Valves Data Sheet No

BAFF VF.011440Y.21 Ball valve 17292 flgd DN 15-100

Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PTFE

BARF VB.011440Y.21 Ball valve 17292 FB (DN 25) flgd DN 15-100

Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PTFE

CHDF VC.011440Y.22 Check valve dual plate Lug type DN 50-100


CHVF VC.011440Y.21 Check valve flgd (Piston lift type) DN 15-40


GAVF VG.011440Y.21 Gate valve flgd DN 15-100


GLVF VL.011440Y.21 Globe valve flgd DN 15-100


VDBT VDB.011440Y.21 Double block and bleed Valve

DN 15-50

Body: ASTM A350-LF2 Trim: Super Duplex, PTFE

Miscellaneous GKSW Gasket spiral wound DN 15-100

AISI 316, graphite filled CS centring-/SS inner ring

MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-100

ASTM A105N For DN 50-80 (600 Lbs) For DN 100 & above (300 Lbs)



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications

PIPING CLASS 011440Y, Page 3 of 5PIPING COMPONENTS Nominal pipe size 15 20 25 40 50 80 100 Item description MESC

Pipe Pipe 743003 0221 0321 0421 0621 0731 1091 1571 Flanges Blind flange 766211 0581 0621 0661 0681 0701 0721 0741 Lap joint flange 766520 4201 Spectacle blind 768837 0021 0041 0061 0081 0101 0121 0141 Welding neck flange 766278 4341 4361 4381 4401 4101 3621 3641 Fittings Cap bw 763017 5731 5791 5831 5913 6121 6281 6481 Elbow 45 deg bw 763034 5731 5791 5831 5913 6121 6281 6481 Elbow 90 deg bw 763042 5731 5791 5831 5913 6121 6281 6481 Tee equal bw 763081 5731 5791 5831 5913 6121 6281 6481 Valves Ball valve 17292 flgd 770025 5031 5041 5051 5071 5081 5101 5121 Ball valve 17292 flgd 770025 0031 0041 0051 0071 0081 0101 0121 Check valve dual plate Lug type 776716 0081 0101 0121 Check valve flgd Piston lift type 771005 0031 0041 0051 0071 Gate valve flgd 772004 0031 0041 0051 0071 0081 0101 0121 Double block and bleed Valve NOTE 1

Miscellaneous Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 Meterrun 766496 0521 0541 0561 0581 Orifice flange set 766295 1421 1061 0351 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION



PIPING CLASS 011440Y, Page 4 of 5

REDUCING /PIPING COMPONENTS Run x Br BROB RECB REEB TERB 20 x 15 7630661421 7630671421 7630880401 25 x 15 7630661521 7630671521 7630880501 25 x 20 7630661621 7630671621 7630880601 40 x 15 7630661721 7630671721 40 x 20 7630661821 7630671821 7630880801 40 x 25 7630661921 7630671921 7630880901 50 x 20 Note 1 Note 1 50 x 25 7630662031 7630672031 7630881121 50 x 40 7630662111 7630672111 7630881161 80 x 40 7630662291 7630672291 80 x 50 7630662381 7630672381 7630881381 100 x 40 7630662531 7630672531 100 x 50 7630662681 7630672681 7630881591 100 x 80 7630662771 7630672771 7630881661


Branch Run pipe BNIF BNIP 15 40 - 100 7680310721 20 50 - 50 7680310731 20 80 - 100 7680310741 25 80 - 100 Note 1 7680310761 40 80 - 80 Note 1 7680310791 40 100 - 100 Note 1 7680310811 50 100 - 100 Note 1



PIPING CLASS 011440Y , Page 5 of 5

BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138661531 20 4 1/2 x 70 8138661551 25 4 1/2 x 70 8138661551 40 4 1/2 x 80 8138661571 50 4 5/8 x 90 8138662711 80 4 5/8 x 100 8138662731 100 8 5/8 x 100 8138662731 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 1/2 x 120 8138661641 25 4 1/2 x 130 8138661661 40 4 1/2 x 130 8138661661 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 3/4 x 150 8138663371



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 011440Z Design limits Temperature (°C) 0 50 100 125 150 225 250 Pressure (Bar ga) DN 15- 600

19.6 19.2 17.7 16.7 15.8 12.9 12.1

Notes - For bending of pipe see DEP 31.38.01.31-Gen. - For basis of design see DEP 31.38.01.10-Gen.

Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).

- The use of red. bore ball valves is considered most economical. Use full bore ball valves only when necessary for process/operating requirements

- Piston type check valves (DN 15-40) for horizontal mounting only -


Table of schedules

DN Schedule 15 160 20 160 25 160 40 160 50 80 80 80

100 40 150 40 200 30 250 30 300 30 350 20 400 20 450 20 500 20 600 20


15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600

600 C C C C E E E E E E B B B B B A 500 C C C C E E E E E E B B B B A 450 C C C C E E E E E B B B B A 400 C C C C E E E E E B B B A 350 C C C C E E E E B B B A 300 C C C C E E E B B B A 250 C C C C E E B B B A 200 C C C C E E B B A 150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A


Carbon steel Sour Plant Qusahwira Phase II FEED Class no. 011440Z Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395



ASTM A106-B

Flanges BLFL Blind flange DN 15-600 ASTM A105N LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 15-300 ASTM A516-60/65/70 SPFL Spade DN 350-600 ASTM A516-60/65/70 SPRT Spacer ring DN 350-600 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-600

ASTM A105N


ASTM A234-WPB

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25 -40 ASTM A105N BNIB Branch fitting bw DN 15-40 ASTM A105N BROB Branch outlet bw DN 150-600 ASTM A105N RECB Reducer concentric bw DN 20-600 ASTM A234-WPB REEB Reducer eccentric bw DN 20-600 ASTM A234-WPB TERB Tee reducing bw DN 20-600

ASTM A234-WPB

PIPING CLASS – 011440Z , Page 2 of 5 Valves Data Sheet No. BAFF VF.011440Z.21 Ball valve 17292 flgd DN 15-150




BTFF VF.011440Z.22 Ball valve 14313 flgd DN 200-600






CHDF VC.011440Z.23 Check valve dual plate double flanged

DN 200-600 Body: ASTM A216-WCB/WCC Trim: Super Duplex, Stellite 6

CHVF VC.011440Z.21 Check valve flgd (Piston lift type) DN 15-40




GLVF VL.011440Z.21 Globe valve flgd DN 15-200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 VDBT VDB.011440Z.21 Double block and bleed Valve

DN 15-50

Body: ASTM A105 N Trim: Super Duplex, PEEK

Miscellaneous GKSW Gasket spiral wound DN 15-600 AISI 316, graphite filled centring-/SS inner ring MTRR Meterrun DN 15-40 y 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-600

TM A105N DN 50-80 (600 Lbs) DN 100 & above (300 Lbs)

STBT Studbolt with nuts --- TM A193-B7M/A194-2HM



PIPING CLASS 011440Z, Page 3 of 5

PIPING COMPONENTS Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 Item description MESC Pipe Pipe 743003 0201 0301 0401 0601 0711 1091 1491 2111 2411 2831 3251 3731 4211 4691 5211 5691 Flanges Blind flange 766211 0581 0621 0661 0681 0701 0721 0741 0761 0781 0801 0821 0841 0861 0881 0901 0921 Spectacle blind 768837 0021 0041 0061 0081 0101 0121 0141 0161 0181 0201 0221 Spacer ring 768846 0241 0261 0281 0301 0321 Spade 768842 0241 0261 0281 0301 0321 Welding neck flange 766278 4021 4041 4061 4081 3601 3621 3141 3161 2581 2601 2621 2141 2161 2181 2201 2241 Lap joint flange 766520 4181 Fittings Cap bw 763017 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 7821 8051 8251 Elbow 45 deg bw 763034 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 7821 8051 8251 Elbow 90 deg bw 763042 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 7821 8051 8251 Tee equal bw 763081 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 7821 8051 8251 Valves Ball valve 14313 flgd 770067 5151 5161 5171 5181 5191 5201 5211 5231

770067 0151 0161 0171 0181 0191 0201 0211 0231 770025 5031 5041 5051 5071 5081 770025 0031 0041 0051 0071 0081 776716 0151 0161 0171 0181 0191 0201 0211 0231 NOTE 1 NOTE 1 772004 0031 0041 0051 0071 0081 0101 0121 0141 0151 0161 0171 0181 0191 0201 0211 0231 773005 0031 0041 0051 0071 0081 0101 0121 0141 0151 NOTE 1

Ball valve 14313 flgd Ball valve 17292 flgd Ball valve 17292 flgd Check valve dual plate double flgd Check valve dual plate Lug type Check valve flgd Piston lift type Gate valve flgd Globe valve flgd Double block and bleed Valve

Miscellaneous Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 3361 3381 3401 Meterrun 766496 0521 0541 0561 0581 Orifice flange set 766295 1051 1061 0231 0241 0131 0141 0151 0061 0071 0081 0091 0101 Strainer Y-type (3 mm ca) 768322 0261 0281 0061 0081 0451 0461 0471 0481 0491 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION .


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING/ PIPING COMPONENTS Run x Br BROB RECB REEB TERB

20 x 15 7630661411 7630671411 7630880391 25 x 15 7630661511 7630671511 7630880491 25 x 20 7630661611 7630671611 7630880591 40 x 15 7630661711 7630671711 40 x 20 7630661811 7630671811 7630880791 40 x 25 7630661911 7630671911 7630880891 50 x 20 7629471971 7630671931 50 x 25 7630661991 7630671991 7630881111 50 x 40 7630662081 7630672081 7630881201 80 x 40 7630662291 7630672291 80 x 50 7630662371 7630672371 7630881331





40 600 - 600 7680370351 7680310301

Branch Run pipe BNIF BNIP 15 40 - 450 7680370211 7680310161 20 50 - 50 7680370221 7680310171 20 80 - 150 7680370241 7680310191 20 200 - 450 7680370271 7680310211 25 80 - 250 7680370281 7680310221 25 300 - 450 7680370291 7680310231 40 80 - 80 7680370321 7680310251 40 100 - 200 7680370331 7680310271 40 250 - 500 7680370341 7680310291



BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138661531 20 4 1/2 x 70 8138661551 25 4 1/2 x 70 8138661551 40 4 1/2 x 80 8138661571 50 4 5/8 x 90 8138662711 80 4 5/8 x 100 8138662731 100 8 5/8 x 100 8138662731 150 8 3/4 x 110 8138663301 200 8 3/4 x 110 8138663301 250 12 7/8 x 120 8138664011 300 12 7/8 x 120 8138664011 350 12 1 x 140 8138664691 400 16 1 x 140 8138664691 450 16 1 1/8 x 150 8138665291 500 20 1 1/8 x 160 8138665301 600 20 1 1/4 x 180 8138665901 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 1/2 x 120 8138661641 25 4 1/2 x 130 8138661661 40 4 1/2 x 130 8138661661 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 3/4 x 150 8138663371 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381 350 20 1 1/8 x 220 8138665401 400 20 1 1/4 x 230 8138665981 450 24 1 1/4 x 250 8138666091

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 70 8138661551 20 4 1/2 x 80 8138661571 25 4 1/2 x 80 8138661571 40 4 1/2 x 80 8138661571 50 4 5/8 x 100 8138662731 80 4 5/8 x 110 8138662741 100 8 5/8 x 110 8138662741 150 8 3/4 x 120 8138663321 200 8 3/4 x 130 8138663341 250 12 7/8 x 140 8138664041 300 12 7/8 x 150 8138664061 350 12 1 x 160 8138664721 400 16 1 x 170 8138664741 450 16 1 1/8 x 180 8138665331 500 20 1 1/8 x 200 8138665251 600 20 1 1/4 x 220 8138665971

500 24 1 1/4 x 260 8138666031 600 24 1 1/2 x 290 8138666801

PIPING CLASS-011440Z, page 5 of 5


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 011441X Design limits

Temperature (°C) 0 50 100 125 150 Pressure (Bar ga) DN 15- 600 19.6 19.2 17.7 16.7 15.8 Notes - -

Intended for process oil & tundish drain services. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).




Table of schedules

DN Schedule 15 160 20 160 25 160 40 160 50 80 80 80

100 40 150 40 200 30 250 30 300 30 350 20 400 20 450 20 500 20 600 20

PIPING CLASS – 011441X , Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600

600 500 450 400

C C C C

C C C C

C C C C

C C C C

E E E E

E E E E

E E E E

E E E E

E E E E

B B B B

B B B B

B B B B

B B B A

B B A

B A

A

350 C C C C E E E E B B B A 300 C C C C E E E B B B A 250 C C C C E E B B B A 200 C C C C E E B B A 150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A


Carbon steel Sour Plant Qusahwira Phase II FEED Class no. 011441X Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-400 ASTM A106-B Flanges BLFL Blind flange DN 15-400 ASTM A105 LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 15-300 ASTM A516-60/65/70 SPFL Spade DN 350-400 ASTM A516-60/65/70 SPRT Spacer ring DN 350-400 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-400 ASTM A105 Fittings CAPB Cap bw DN 15-400 ASTM A234-WPB E45B Elbow 45 deg bw DN 15-400 ASTM A234-WPB E90B Elbow 90 deg bw DN 15-400 ASTM A234-WPB TEEB Tee equal bw DN 15-400 ASTM A234-WPB Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-50 ASTM A105 BNIB Branch fitting bw DN 15-40 ASTM A105 BROB Branch outlet bw DN 150-400 ASTM A105 RECB Reducer concentric bw DN 20-400 ASTM A234-WPB REEB Reducer eccentric bw DN 20-400 ASTM A234-WPB TERB Tee reducing bw DN 20-400 ASTM A234-WPB

PIPING CLASS – 011441X , Page 2 of 5 Valves Data Sheet No. BAFF VF.011441X.21 Ball valve 17292 flgd DN 15-150 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PTFE BARF VB.011441X.21 Ball valve 17292 FB (DN 15-25)

flgd DN 15-150 Body: ASTM A105/A216-WCB/WCC

Trim: Alloy 825, PTFE BTFF VF.011441X.22 Ball valve 14313 flgd DN 200-400 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PTFE BTRF VB.011441X.22 Ball valve 14313 flgd DN200 -400 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PTFE CHDF VC.011441X.23 Check valve dual plate double flgd DN200 -400 Body: ASTM A216-WCB/WCC CHDF VC.011441X.22

Check valve dual plate Lug type

DN 50-150

Trim: Alloy 825, Stellite 6 Body:ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6

CHVF VC.011441X.21 Check valve (Piston lift type) DN 15-40 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 GAVF VG.011441X.21 Gate valve flgd DN 15-400 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 GLVF VL.011441X.21 Globe valve flgd DN 15-200 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 NDVF VN.011441X.21 Needle Valve flgd DN 15-15 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 VDBT VDB.011441X.21 Double block and bleed Valve DN 15-50 Body: ASTM A350-LF2 Trim: Alloy 825, PTFE

Miscellaneous GKSW Gasket spiral wound DN 15-400 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-400

ASTM A105 For DN 15-80 (600 Lbs) For DN 100 & above (300 Lbs)



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS 011441X , Page 3 of 5 PIPING COMPONENTS 15 20 25 40 50 80 100 150 200 250 300 350 400 Item description MESC Pipe Pipe 743003 0201 0301 0401 0601 0711 1091 1491 2111 2411 2831 3251 3731 4211 Flanges Blind flange 766211 0581 0621 0661 0681 0701 0721 0741 0761 0781 0801 0821 0841 0861 Spectacle blind 768837 0021 0041 0061 0081 0101 0121 0141 0161 0181 0201 0221 Spacer ring 768846 0241 0261 Spade 768842 0241 0261 Welding neck flange 766278 4021 4041 4061 4081 3601 3621 3141 3161 2581 2601 2621 2141 2161 Lap joint flange 766520 4181 Fittings Cap bw 763017 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 Elbow 45 deg bw 763034 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 Elbow 90 deg bw 763042 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 Tee equal bw 763081 5721 5781 5821 5921 6081 6281 6451 6651 6831 7031 7231 7421 7621 Valves Ball valve 14313 flgd 770091 5151 5161 5171 5181 5191

Ball valve 14313 flgd 770091 0151 0161 0171 0181 0191

Ball valve 17292 flgd 770054 5031 5041 5051 5071 5081 5101 5121 5131

Ball valve 17292 flgd 770054 0031 0041 0051 0071 0081 0101 0121 0041

Check valve dual plate double flgd 776714 0151 0161 0171 0181 0191 Please refer respective valve data sheet no. Specified on sheet no 2 of 5.of piping

Check valve dual plate Lug type NOTE 1

Check valve flgd Piston lift type NOTE 1

Gate valve flgd 772053 0031 0041 0051 0071 0081 0101 0121 0141 0151 0161 0171 0181 0191

Globe valve flgd 773053 0031 0041 0051 0071 0081 0101 0121 0141 0151 Please refer respective valve data sheet no. Specified on sheet no 2 of 5.of piping

Double block and bleed Valve NOTE 1

Needle Vave flgd NOTE 1 Miscellaneous Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 Meterrun 766496 0521 0541 0561 0581 Orifice flange set 766295 1051 1061 0231 0241 0131 0141 0151 0061 0071 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING/PIPING COMPONENTS Run x Br BROB RECB REEB TERB

20 x 15 7630661411 7630671411 7630880391 25 x 15 7630661511 7630671511 7630880491 25 x 20 7630661611 7630671611 7630880591 40 x 15 7630661711 7630671711 40 x 20 7630661811 7630671811 7630880791 40 x 25 7630661911 7630671911 7630880891 50 x 20 7629471971 7630671931 50 x 25 7630661991 7630671991 7630881111 50 x 40 7630662081 7630672081 7630881201 80 x 40 7630662291 7630672291 80 x 50 7630662371 7630672371 7630881331

100 x 40 7630662521 7630672491 100 x 50 7630662661 7630672661 7630881571 100 x 80 7629472751 7629622701 7630881691 150 x 50 7679010641 150 x 80 7630662961 7630672961 7630881811 150 x 100 7630663051 7630673051 7630881891 200 x 50 7679012631 200 x 80 7679012751 200 x 100 7630663241 7630673241 7630882111 200 x 150 7630663341 7630673341 7630882311 250 x 50 7679012641 250 x 80 7679012761 250 x 100 7629473421 7629623421 7630882591 250 x 150 7630663521 7630673521 7630882771 250 x 200 7630663631 7630673631 7630882901 300 x 50 7679012651 300 x 80 7679012771 300 x 100 7679003921 300 x 150 7630663811 7630673811 7630883161 300 x 200 7630663941 7630673941 7630883271 300 x 250 7630664031 7630674031 7630883491

Comp.name

Description

BNIF Branch fitting flgd BNIP Branch fitting plain BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw

Run x Br BROB RECB REEB TERB

350 x 50 7679017471 350 x 80 7679017591 350 x 100 7679003011 350 x 150 7679003111 7629476001 7629626001 350 x 200 7629476391 7629626401 7630883961 350 x 250 7629476731 7629626731 7630884211 350 x 300 7630664451 7630674451 7630884471 400 x 50 7679017481 400 x 80 7679017601 400 x 100 7679003021 400 x 150 7679003171 400 x 200 7679001081 7629478201 7629628131 400 x 250 7629478691 7629628641 7630885111 400 x 300 7630664711 7630674711 7630885371 400 x 350 7630664821 7630674821 7630885541

PIPING CLASS-011441X, Page 4 of 5

Branch Run pipe BNIF BNIP 15 40 - 400 7680370211 7680310161 20 50 - 50 7680370221 7680310171 20 80 - 150 7680370241 7680310191 20 200 - 400 7680370271 7680310211 25 80 - 250 7680370281 7680310221 25 300 - 400 7680370291 7680310231 40 80 - 80 7680370321 7680310251 40 100 - 200 7680370331 7680310271 40 250 - 400 7680370341 7680310291 50 80 - 400 Note 1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138661531 20 4 1/2 x 70 8138661551 25 4 1/2 x 70 8138661551 40 4 1/2 x 80 8138661571 50 4 5/8 x 90 8138662711 80 4 5/8 x 100 8138662731 100 8 5/8 x 100 8138662731 150 8 3/4 x 110 8138663301 200 8 3/4 x 110 8138663301 250 12 7/8 x 120 8138664011 300 12 7/8 x 120 8138664011 350 12 1 x 140 8138664691 400 16 1 x 140 8138664691 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 1/2 x 120 8138661641 25 4 1/2 x 130 8138661661 40 4 1/2 x 130 8138661661 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 3/4 x 150 8138663371 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381 350 20 1 1/8 x 220 8138665401 400 20 1 1/4 x 230 8138665981

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 70 8138661551 20 4 1/2 x 80 8138661571 25 4 1/2 x 80 8138661571 40 4 1/2 x 80 8138661571 50 4 5/8 x 100 8138662731 80 4 5/8 x 110 8138662741 100 8 5/8 x 110 8138662741 150 8 3/4 x 120 8138663321 200 8 3/4 x 130 8138663341 250 12 7/8 x 140 8138664041 300 12 7/8 x 150 8138664061 350 12 1 x 160 8138664721 400 16 1 x 170 8138664741




CLASS 011502Z Design limits Temperature (°C) -45 0 50 100 125 150 180 240 Pressure (Bar ga) DN 15-750

19.6 19.6 19.2 17.7 16.7 15.8 14.6 12.44

Notes - -

Intended for vent gas,Glycol,Glycol Drain,Hydrocarbon Condensate & Nitrogen service. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).


necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - -

The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality. HIC testing to be done on CS welded pipe fabricated out of plates.

Table of schedules

DN Schedule 15 160 20 160 25 160 40 160 50 80 80 80

100 40 150 40 200 30 250 30 300 30 350 20 400 20 450 20 500 20 600 650 700 750

20 STD STD STD


15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 650 700 750

750 700 650 600

C C C C

C C C C

C C C C

C C C C

E E E E

E E E E

E E E E

E E E E

E E E E

E E E E

B B B B

B B B B

B B B B

B B B B

B B B B

B B B A B B A B A A



Carbon steel LT F-Gr Sour Plant Qusahwira Phase II FEED Class no. 011502Z Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395

ADCO DOC.NO.58.99.12.0603, APPENDIX 2


DN 650-750 ASTM A333-6 A671 CC65 Class22

Flanges BLFL Blind flange DN 15-750 ASTM A350-LF2 LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 15-300 ASTM A516-60/65/70 SPFL Spade DN 350-750 ASTM A516-60/65/70 SPRT Spacer DN 350-750 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-750 ASTM A350-LF2 Fittings CAPB Cap bw DN 15-750 ASTM A420-WPL6 E45B Elbow 45 deg bw DN 15-600

DN 650-750 ASTM A420-WPL6 ASTM A420-WPL6-W

E90B Elbow 90 deg bw DN 15-600 DN 650-750

ASTM A420-WPL6 ASTM A420-WPL6-W

TEEB Tee equal bw DN 15-600 DN 650-750


Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-40 ASTM A350-LF2 BNIB Branch fitting bw DN 15-40 ASTM A350-LF2 BROB Branch outlet bw DN 150-750 ASTM A350-LF2 RECB Reducer concentric bw DN 20-600

DN 650-750 ASTM A420-WPL6 ASTM A420-WPL6-W

REEB Reducer eccentric bw DN 20-600 DN 650-750


TERB Tee reducing bw DN 20-600 DN 650-750


PIPING CLASS – 011502Z , Page 2 of 5 Valves Valve Data Sheet No. BTFF VF.011502Z.21 Ball valve 17292 flgd DN 15-150 Body: ASTM A350-LF2/A352-LCC BTFF VF.011502Z.22


DN 200-750

Trim: AISI 316, PEEK Body:ASTM A350-LF2/A352-LCC Trim:AISI 316,PEEK

BTRF VB.011502Z.21 Ball valve 17292 flgd DN 15-150 Body: ASTM A350-LF2/A352-LCC BTRF VB.011502Z.22


DN 200-750

Trim: AISI 316, PEEK Body:ASTM A350-LF2/A352-LCC Trim:AISI 316,PEEK

CHDF VC.011502Z.23 Check valve dual plate double flgd DN 200-750 Body: ASTM A352-LCC Trim: AISI 316, Stellite 6 CHVF VC.011502Z.21 Check valve (piston type) DN 15-40 Body: ASTM A350-LF2/A352-LCC CHDF VC.011502Z.22


DN 50-150

Trim: AISI 316, Stellite 6 Body:ASTM A350-LF2/A352-LCC Trim:AISI 316,Stellite 6

GAVF VG.011502Z.21 Gate valve flgd DN 15-750 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 GLVF VL.011502Z.21 Globe valve flgd DN 15-200 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 VDBT VDB.011502Z.21 Double block and bleed Valve DN 15-50

Body: ASTM A350-LF2 Trim: AISI 316, PEEK

Miscellaneous GKSW Gasket spiral wound DN 15-750 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-600 ASTM A350-LF2


STBT Studbolt with nuts --- ASTM A320-L7M/A194-7M


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS – 011502Z, Page 3 of 5 PIPING COMPONENTS Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 650 700 750 Item description MESC Pipe Pipe 743016

743023 0231 0301 0381 0541 0611 0691 0751 0841 0931 1051 1171 1291 1391 1641 2041 2341 NOTE1

0391 Flanges Blind flange 766212 4581 4621 4661 4681 4701 4721 4741 4761 4781 4801 4821 4841 4861 4881 4901 4921 767013 0521 0541 0561 Spectacle blind 768835 1081 1121 1161 1181 1201 1221 1241 1261 1281 1301 1321 Spacer ring 768847 0341 0361 0381 0401 0441 ---- NOTE1---- Spade 768861 0121 0131 0141 0151 0161 ---- NOTE1----

Welding neck flange 766282 1821 1841 1861 1881 1601 1621 1141 1161 0581 0601 0621 0141 0161 0181 0201 0241 ---- NOTE1- 767083 0171 Lap Joint Flange 766520 4181 Fittings Cap bw 763117 1721 1781 1821 1921 2101 2301 2461 2661 2831 3041 3261 3451 3651 3841 3941 4041 -NOTE1- 5391 Elbow 45 deg bw 763134 1721 1781 1821 1921 2101 2301 2461 2661 2831 3041 3261 3451 3651 3841 3941 4041 -NOTE1- 5191 Elbow 90 deg bw 763143 1721 1781 1821 1921 2101 2301 2461 2661 2831 3041 3261 3451 3651 3841 3941 4041 -NOTE1- 5191 Tee equal bw 763180 1721 1781 1821 1921 2101 2301 2461 2661 2831 3041 3261 3451 3651 3841 3941 4041 -NOTE1- 5191 Valves Ball valve 14313 flgd 770077 5151 5161 5171 5181 5191 5201 5211 5231 5261 Ball valve 14313 flgd 770077 0151 0161 0171 0181 0191 0201 0211 0231 0261 Ball valve 17292 flgd 770031 5031 5041 5051 5071 5081 5101 5121 5131 Ball valve 17292 flgd 770031 0031 0041 0051 0071 0081 0101 0121 0441 Check valve dual plate double flgd 776720 0151 0161 0171 0181 0191 0201 0211 0231 0261 Check valve dual plate Lug type Check valve flgd Piston lift type

NOTE 1 NOTE 1

Gate valve flgd 772041 3031 3041 3051 3071 3081 3101 3121 3141 3151 3161 3171 3181 3191 3201 3211 3231 0261 Globe valve flgd 773033 0031 0041 0051 0071 6091 6101 6121 6141 6151 Double block and bleed Valve NOTE 1

Miscellaneous Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 3361 3381 3421 ---- NOTE1---- Meterrun 766496 0521 0541 0561 0581 Orifice flange set 766297 1121 1131 0241 0261 0141 0151 0161 0061 0071 0081 0091 0101 NOTE 1: NEW MESC NO WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications .REDUCING/PIPING COMPONENTS Run x Br BROB RECB REEB TERB

20 x 15 7631661411 7631751411 7631880391 25 x 15 7631661511 7631751511 7631880491 25 x 20 7631661611 7631751611 7631880591 40 x 15 7631661711 7631751711 40 x 20 7631661811 7631751811 7631880791 40 x 25 7631661911 7631751911 7631880891 50 x 20 7631661931 7631751931 50 x 25 7631661991 7631751991 7631881111 50 x 40 7631662081 7631752081 7631881201 80 x 40 7631662291 7631752291 80 x 50 7631662371 7631752371 7631881331




650 x 50 NOTE1 650 x 80 NOTE1 650 x 100 NOTE1 650 x 150 NOTE1 650 x 200 NOTE1 650 x 250 NOTE1 650 x 300 NOTE1 650 x 350 NOTE1 650 x 400 NOTE1 650 x 450 NOTE1 NOTE1 NOTE1 650 x 500 NOTE1 NOTE1 NOTE1 650 x 600 NOTE1 NOTE1 NOTE1 700 x 50 NOTE1

PIPING CLASS – 011502Z, Page 4 of 5

Run x Br BROB RECB REEB TERB 700 x 80 NOTE1 700 x 100 NOTE1 700 x 150 NOTE1 700 x 200 NOTE1 700 x 250 NOTE1 700 x 300 NOTE1 700 x 350 NOTE1 700 x 400 NOTE1 700 x 450 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 600 NOTE1 NOTE1 NOTE1 700 x 650 NOTE1 NOTE1 NOTE1

750 x 50 7678281071 750 x 80 7678281201 750 x 100 7679121221 750 x 150 7679121371 750 x 200 7679120471 750 x 250 7679120571 750 x 300 NOTE1

750 x 350 NOTE1 750 x 400 NOTE1 750 x 450 NOTE1 750 x 500 NOTE1 750 x 600 NOTE1 NOTE1 NOTE1 750 x 650 NOTE1 NOTE1 NOTE1 750 x 700 NOTE1 NOTE1 NOTE1

Branch Run pipe BNIF BNIP 15 40 - 750 7680375211 7680311161 20 50 - 50 7680375221 7680311121 20 80 - 150 7680375241 7680311001 20 200 - 750 7680375271 7680310991 25 80 - 250 7680375281 7680310971 25 300 - 750 7680375291 7680310951 40 80 - 80 7680375321 7680310931 40 100 - 200 7680375331 7680310911 40 250 - 500 7680375341 7680310891 40 600 - 750 7680375351 7680310871




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138671531 20 4 1/2 x 70 8138671551 25 4 1/2 x 70 8138671551 40 4 1/2 x 80 8138671571 50 4 5/8 x 90 8138672711 80 4 5/8 x 100 8138672731 100 8 5/8 x 100 8138672731 150 8 3/4 x 110 8138673301 200 8 3/4 x 110 8138673301 250 12 7/8 x 120 8138674011 300 12 7/8 x 120 8138674011 350 12 1 x 140 8138674691 400 16 1 x 140 8138674691 450 16 1 1/8 x 150 8138675291 500 20 1 1/8 x 160 8138675301 600 20 1 1/4 x 180 8138675901 650 24 1 1/4 x 230 Note 1 700 28 1 1/4 x 230 Note 1 750 28 1 1/4 x 240 Note 1 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138671641 20 4 1/2 x 120 8138671641 25 4 1/2 x 130 8138671661 40 4 1/2 x 130 8138671661 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 3/4 x 150 8138673371 150 12 3/4 x 150 8138673371 200 12 7/8 x 170 8138674091 250 16 1 x 190 8138674771 300 16 1 1/8 x 210 8138675381 350 20 1 1/8 x 220 8138675401 400 20 1 1/4 x 230 8138675981 450 24 1 1/4 x 250 8138676061 500 24 1 1/4 x 260 8138676031 600 24 1 1/2 x 290 8138676901

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 70 8138671551 20 4 1/2 x 80 8138671571 25 4 1/2 x 80 8138671571 40 4 1/2 x 80 8138671571 50 4 5/8 x 100 8138672731 80 4 5/8 x 110 8138672741 100 8 5/8 x 110 8138672741 150 8 3/4 x 120 8138673321 200 8 3/4 x 130 8138673341 250 12 7/8 x 140 8138674041 300 12 7/8 x 150 8138674061 350 12 1 x 160 8138674721 400 16 1 x 170 8138674741 450 16 1 1/8 x 180 8138675331 500 20 1 1/8 x 200 8138675441 600 20 1 1/4 x 220 8138675971 650 24 1 1/4 x 290 Note 1 750 28 1 1/4 x 310 Note 1



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 011503Z Design limits Temperature (°C) -45 0 50 100 125 150 200 205 250 Pressure (Bar ga) DN 15-1050

19.6 19.6 19.2 17.7 16.7 15.8 13.8 13.6 12.1

Notes - -

Intended for vent gas,Nitrogen,Process oil, and Drain service . Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).




- HIC testing to be done on CS welded pipe fabricated out of plates. Table of schedules

DN Schedule 15 160 20 160 25 160 40 160 50 80 80 80

100 40 150 40 200 30 250 30 300 30 350 20 400 20 450 20 500 20 600

20

PIPING CLASS – 011503Z , Page 1 of 5 Branch connections 90 degrees Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600



Carbon steel LT F-Gr Sour Plant Qusahwira Phase II FEED Class no. 011503Z Consignee ASME rating CLASS 150 Engineered by snc lavalin international Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14363


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE PIPE

Pipe Pipe

DN 15-600 DN 650-1050

ASTM A333-6 ASTM A671-CC65 CL.22

Flanges BLFL Blind flange DN 15-1050 ASTM A350-LF2 LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 15-300 ASTM A516-60/65/70 SPFL Spade DN 350 -1050 ASTM A516-60/65/70 SPRT Spacer ring DN 350 -1050 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-1050 ASTM A350-LF2 Fittings CAPB Cap bw DN 15-1050 ASTM A420-WPL6 E45B E45B


DN 15-600 DN 650-1050


E90B E90B


DN 15-600 DN 650-1050


TEEB TEEB

Tee equal bw Tee equal bw

DN 15-600 DN 650-1050


Reducing fittings ( Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25 -40 ASTM A350-LF2 BNIB Branch fitting bw DN 15-40 ASTM A350-LF2 BROB Branch outlet bw DN 150-1050 ASTM A350-LF2 RECB RECB


DN 20-600 DN 650-1050


REEB REEB


DN 20-600 DN 650-1050


TERB TERB


DN 20-400 600 DN 650-1050


PIPING CLASS – 011503Z , Page 2 of 5 Valves Data Sheet No. BAFF VF.011503Z.21 BARF VB.011503Z.21

Ball valve 17292 flgd Ball valve 17292 FB (DN 100) flgd

DN 15-150 DN 15-150

Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, PEEK Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, PEEK

BTFF VF.011503Z.22 Ball valve 14313 flgd DN 200-600 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, PEEK

BTRF VB.011503Z.22 Ball valve 14313 FB (DN 200, 450, 600) flgd

DN 200-900 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, PEEK

BTFF VF.011503Z.23 Ball valve 14313 flgd DN 1050 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, PEEK

CHDF VC.011503Z.23 Check valve dual plate double flgd DN 200-1050

Body: ASTM A352-LCC Trim: Alloy 825, Stellite 6

CHVF VC.011503Z.21 Check valve flgd (Piston lift type) DN 15-40 Body: ASTM A350-LF2/A352-LCC CHVF VC.011503Z.22


DN 50-150

Trim: AlIoy 825, Stellite 6 Body: ASTM A350-LF2/A352-LCC Trim: AlIoy 825, Stellite 6

GAVF VG.011503Z.21 Gate valve flgd DN 15-1050 Body: ASTM A350-LF2/A352-LCC Trim: AlIoy 825, Stellite 6 GLVF VL.011503Z.21 Globe valve flgd DN 15-200 Body: ASTM A350-LF2/A352-LCC Trim: AlIoy 825, Stellite 6 VDBT VDB.011503Z.21

Double block and bleed Valve

DN 15-50

Body: ASTM A350-LF2 Trim: Alloy 825, PEEK

Miscellaneous GKSW Gasket spiral wound DN 15-1050 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-600 ASTM A350-LF2


ST3B Strainer Y-type (3 mm ca) DN 50-400 Sieve: UNS N08825 STBT Studbolt with nuts --- ASTM A320-L7M/A194-7M


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS -011503Z , Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 650 700 750 900 950 1050 Item description MESC Pipe Pipe 743016 0231 0301 0381 0541 0611 0691 0751 0841 0931 1051 1171 1291 1391 1641 2041 2341 Pipe Note1 Note1 0391 1021 Note1 1621 Flanges Blind flange 766212 4581 4621 4661 4681 4701 4721 4741 4761 4781 4801 4821 4841 4861 4881 4901 4921 ------------------------Note 1------------------------ Spectacle blind 768835 1081 1121 1161 1181 1201 1221 1241 1261 1281 1301 1321 Spacer ring 768847 0341 0361 0381 0401 0441 ------------------------Note 1------------------------ Spade 768861 0121 0131 0141 0151 0161 ------------------------Note 1------------------------ Welding neck flange 766282 1821 1841 1861 1881 1601 1621 1141 1161 0581 0601 0621 0141 0161 0181 0201 0241 ------------------------Note 1------------------------ Lap joint flange 766520 4181 Fittings Cap bw 763117 1721 1781 1821 1921 2101 2301 2461 2661 2831 3041 3261 3451 3651 3841 3941 4041 Cap bw Note1 Note1 5391 6021 Note1 6621 Elbow 45 deg bw 763134 1721 1781 1821 1921 2101 2301 2461 2661 2831 3041 3261 3451 3651 3841 3941 4041 Elbow 45 deg bw Note1 Note1 5191 6691 Note1 7431 Elbow 90 deg bw 763143 1721 1781 1821 1921 2101 2301 2461 2661 2831 3041 3261 3451 3651 3841 3941 4041 Elbow 90 deg bw Note1 Note1 5191 6691 Note1 7391 Tee equal bw 763180 1721 1781 1821 1921 2101 2301 2461 2661 2831 3041 3261 3451 3651 3841 3941 4041 Tee equal bw Note1 Note1 5191 6601 Note1 7431 Valves Ball valve 14313 flgd 770094 5151 5161 5171 5181 5191 5201 5211 5231 5261 Ball valve 14313 flgd 770094 0151 0161 0171 0181 0191 0201 0211 0231 0261 Ball valve 17292 flgd 770056 5031 5041 5051 5071 5081 5101 5121 5131 Ball valve 17292 flgd 770056 0031 0041 0051 0071 0081 0101 0121 0441 Check valve dual plate double flgd 776719 0151 0161 0171 0181 0191 0201 0211 0231 0261 Check valve dual plate Lug type Check valve flgd Piston lift type

NOTE 1 NOTE 1

Gate valve flgd 772054 0031 0041 0051 0071 6081 6101 6121 6141 6151 6161 6171 6181 6191 6201 6211 6231 0261 Globe valve flgd 773054 3031 3041 3051 3071 6081 6101 6121 6141 6151 Double block and bleed Valve NOTE 1

Miscellaneous Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 3361 3381 3421 ------------------------Note 1------------------------ Meterrun 766496 0521 0541 0561 0581 Orifice flange set 766297 1121 1131 0241 0261 0141 0151 0161 0061 0071 0081 0091 0101 ------------------------Note 1------------------------ Strainer Y-type (3 mm ca) ------------------------Note 1------------------------ NOTE 1: NEW MESC NO WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING / PIPING COMPONENT Run x Br BROB RECB REEB TERB

20 x 15 7631661411 7631751411 7631880391 25 x 15 7631661511 7631751511 7631880491 25 x 20 7631661611 7631751611 7631880591 40 x 15 7631661711 7631751711 40 x 20 7631661811 7631751811 7631880791 40 x 25 7631661911 7631751911 7631880891 50 x 20 7631661931 7631751931 50 x 25 7631661991 7631751991 7631881111 50 x 40 7631662081 7631752081 7631881201 80 x 40 7631662291 7631752291 80 x 50 7631662371 7631752371 7631881331




650 x 50 NOTE1 650 x 80 NOTE1 650 x 100 NOTE1 650 x 150 NOTE1 650 x 200 NOTE1 650 x 250 NOTE1 650 x 300 NOTE1 650 x 350 NOTE1 650 x 400 NOTE1 650 x 450 NOTE1 NOTE1 NOTE1 650 x 500 NOTE1 NOTE1 NOTE1 650 x 600 NOTE1 NOTE1 NOTE1

PIPING CLASS -011503Z , Page 4 of 5

Run

x

Br

BROB

RECB

REEB

TERB 700 x 50 NOTE1 700 x 80 NOTE1 700 x 100 NOTE1 700 x 150 NOTE1 700 x 200 NOTE1 700 x 250 NOTE1 700 x 300 NOTE1 700 x 350 NOTE1 700 x 400 NOTE1 700 x 450 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 600 NOTE1 NOTE1 NOTE1 700 x 650 NOTE1 NOTE1 NOTE1

750 x 50 NOTE1 750 x 80 NOTE1 750 x 100 NOTE1 750 x 150 NOTE1 750 x 200 NOTE1 750 x 250 NOTE1 750 x 300 NOTE1 750 x 350 NOTE1 750 x 400 NOTE1 750 x 450 NOTE1 750 x 500 NOTE1 750 x 600 NOTE1 NOTE1 NOTE1 750 x 650 NOTE1 NOTE1 NOTE1 750 x 700 NOTE1 NOTE1 NOTE1

900 x 50 NOTE1 900 x 80 NOTE1 900 x 100 NOTE1 900 x 150 NOTE1 900 x 200 NOTE1 900 x 250 NOTE1 900 x 300 NOTE1 900 x 350 NOTE1 900 x 400 NOTE1 900 x 450 NOTE1 900 x 500 NOTE1 NOTE1 NOTE1 900 x 500 NOTE1 NOTE1 NOTE1 900 x 600 NOTE1 NOTE1 NOTE1 900 x 650 NOTE1 NOTE1 NOTE1 900 x 700 NOTE1 NOTE1 NOTE1 900 x 750 NOTE1 NOTE1 NOTE1

1050 x 50 NOTE1 1050 x 80 NOTE1 1050 x 100 NOTE1 1050 x 150 NOTE1 1050 x 200 NOTE1 1050 x 250 NOTE1 1050 x 300 NOTE1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING / PIPING COMPONENT

Run x Br BROB RECB REEB TERB 1050 x 350 NOTE1 1050 x 400 NOTE1 1050 x 450 NOTE1 1050 x 500 NOTE1 1050 x 600 NOTE1 NOTE1 NOTE1 1050 x 650 NOTE1 NOTE1 NOTE1 1050 x 700 NOTE1 NOTE1 NOTE1 1050 x 750 NOTE1 NOTE1 NOTE1 1050 x 900 NOTE1 NOTE1 NOTE1

BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138671531 20 4 1/2 x 70 8138671551 25 4 1/2 x 70 8138671551 40 4 1/2 x 80 8138671571 50 4 5/8 x 90 8138672711 80 4 5/8 x 100 8138672731 100 8 5/8 x 100 8138672731 150 8 3/4 x 110 8138673301 200 8 3/4 x 110 8138673301 250 12 7/8 x 120 8138674011 300 12 7/8 x 120 8138674011 350 12 1 x 140 8138674691 400 16 1 x 140 8138674691 450 16 1 1/8 x 150 8138675291 500 20 1 1/8 x 160 8138675301 600 20 1 1/4 x 180 8138675901 650 24 1 1/4 x 230 Note 1 700 28 1 1/4 x 230 Note 1 750 28 1 1/4 x 240 Note 1 1050 36 1 1/2 x 300 Note 1 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138671641 20 4 1/2 x 120 8138671641 25 4 1/2 x 130 8138671661 40 4 1/2 x 130 8138671661 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 3/4 x 150 8138673371 150 12 3/4 x 150 8138673371 200 12 7/8 x 170 8138674091 250 16 1 x 190 8138674771 300 16 1 1/8 x 210 8138675381 350 20 1 1/8 x 220 8138675401 400 20 1 1/4 x 230 8138675981 450 24 1 1/4 x 250 8138676061 500 24 1 1/4 x 260 8138676031 600 24 1 1/2 x 290 8138676901

PIPING CLASS -011503Z , Page 5 of 5

REDUCING / PIPING COMPONENT

Branch Run pipe BNIF BNIP 15 40 - 1050 7680375211 7680311161 20 50 - 50 7680375221 7680311121 20 80 - 150 7680375241 7680311001 20 200 - 1050 7680375271 7680310991 25 80 - 250 7680375281 7680310971 25 300 - 1050 7680375291 7680310951 40 80 - 80 7680375321 7680310931 40 100 - 200 7680375331 7680310911 40 250 - 500 7680375341 7680310891 40 600 - 1050 7680375351 7680310871

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 70 8138671551 20 4 1/2 x 80 8138671571 25 4 1/2 x 80 8138671571 40 4 1/2 x 80 8138671571 50 4 5/8 x 100 8138672731 80 4 5/8 x 110 8138672741 100 8 5/8 x 110 8138672741 150 8 3/4 x 120 8138673321 200 8 3/4 x 130 8138673341 250 12 7/8 x 140 8138674041 300 12 7/8 x 150 8138674061 350 12 1 x 160 8138674721 400 16 1 x 170 8138674741 450 16 1 1/8 x 180 8138675331 500 20 1 1/8 x 200 8138675441 600 20 1 1/4 x 220 8138675971 650 24 1 1/4 x 290 Note 1 750 28 1 1/4 x 310 Note 1 1050 36 1 1/2 x 360 Note 1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 013411Z Design limits Temperature (°C) -20

0 50 75 100 125

Pressure (Bar ga) DN 15-150

19.0 19.0 18.4 17.3 16.2 15.5

Notes - -

Intended for scale preventative,Corrosion Inhibitor, deoiler, chemical & Bactericide services. Design limits acc. to ASME B16.5 flange rating mat. grp 2.2 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).

- For bending of pipe see DEP 31.38.01.31-Gen. - For basis of design see DEP 31.38.01.10-Gen. - When chlorides are present in the process fluid in conjunction with free oxygen, the max.

temperature is limited to 50 deg C, to prevent chloride stress corrosion cracking - The use of red. bore ball valves is considered most economical. Use full bore ball valves only when

necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only

Table of schedules

DN Schedule 15 40S 20 40S 25 10S 40 10S 50 10S 80 10S

100 10S 150 10S


15 20 25 40 50 80 100 150

150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A

Code Explanation of characters A Equal tee B Reducing tee C Branch fitting E Branch outlet

Stainl steel AISI 316L Plant Qusahwira PhaseII FEED Class no. 013411Z Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395



ASTM A312-TP316L

Flanges BLFL Blind flange DN 15-150 ASTM A182-F316 LJFL Lap joint flange DN40-40 ASTM A182-F316 SBFL Spectacle blind DN 15-150 ASTM A240-TP316 WNFL Welding neck flange DN 15-150

ASTM A182-F316

Fittings CAPB Cap bw DN 15-150 ASTM A403-WP316L E45B Elbow 45 deg bw DN 15-150 ASTM A403-WP316L E90B Elbow 90 deg bw DN 15-150 ASTM A403-WP316L TEEB Tee equal bw DN 15-150

ASTM A403-WP316L

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fiting flgd DN 25-40 ASTM A182-F316 BNIB Branch fitting bw DN 15-40 ASTM A182-F316 BROB Branch outlet bw DN 150-150 ASTM A182-F316 RECB Reducer concentric bw DN 20-150 ASTM A403-WP316L REEB Reducer eccentric bw DN 20-150 ASTM A403-WP316L TERB BNIF

Tee reducing bw Branch fitting flgd

DN 20-150 DN 25-40

ASTM A403-WP316L ASTM A182-F316

PIPING CLASS – 013411Z , Page 2 of 5 Valves Data Sheet No. BAFF VF.013411Z.21 Ball valve 17292 flgd DN 15-150

Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PTFE


Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PTFE


Body: ASTM A351-CF8M Trim: AISI 316, Stellite 6

CHVF VC.013411Z.21 Check valve flgd (Piston lift type) DN 15-40

Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6



GLVF VL.013411Z.21 Globe valve flgd DN 15-150


VDBT VDB.013411Z.21 Double block and bleed Valve DN 15-50

Body: ASTM A182-F316 Trim: AISI 316 PTFE



MTRR Meterrun DN 15-40 Alloy 400/AISI 316 end flanges ORFS Orifice flange set DN50-150

ASTM A182-F316 For DN 50-80 (600 Lbs) For DN 100 & above (300Lbs)

STBT Studbolt with nuts --- ASTM A193-B7/A194-2H


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS – 013411Z , PAGE 3 OF 5 PIPING COMPONENTS Nominal pipe size 15 20 25 40 50 80 100 150 Item description MESC Pipe Pipe 743633 0181 0261 0331 0491 0571 0651 0731 0821 Flanges Blind flange 766510 3121 3141 3161 3181 3201 3221 3241 3261 Spectacle blind 768810 1581 1621 1661 1681 1701 1721 1741 1761 Welding neck flange Lapjoint Flange

766579 766520

2621 2641 2061 2081 4181

2101 2121 2141 2161

Fittings Cap bw 763319 2861 2961 3041 3241 3341 3541 3741 3931 Elbow 45 deg bw 763337 2861 2961 3041 3241 3341 3541 3741 3931 Elbow 90 deg bw 763341 2861 2961 3041 3241 3341 3541 3741 3931 Tee equal bw 763384 7861 7961 8041 8241 8341 8541 8741 8931 Valves Ball valve 17292 flgd 770326 5031 5041 5051 5071 5081 5101 5121 5131

770326 0031 0041 0051 0071 0081 0101 0121 0441 NOTE 1 NOTE 1 772303 0031 0041 0051 0071 3081 3101 3121 3141 773303 0031 0041 0051 0071 0081 0101 0121 0141 NOTE 1

Ball valve 17292 flgd Check valve dual plate Lug type Check valve flgd Piston lift type Gate valve flgd Globe valve flgd Double block and bleed Valve

Miscellaneous Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 Meterrun 766496 0021 0041 0061 0081 Orifice flange set 766592 4911 4931 4011 4021 NOTE 1: NEW MESC NO WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION



20 x 15 7633705661 7633725661 7633856181 25 x 15 7633705791 7633725791 7633856321 25 x 20 7633705891 7633725891 7633856371 40 x 15 7633705991 7633725991 40 x 20 7633706191 7633726191 7633856491 40 x 25 7633706241 7633726241 7633856561 50 x 20 7636500901 7636630901 50 x 25 7633706341 7633726341 7633856721 50 x 40 7633706441 7633726441 7633856831 80 x 40 7633706741 7633726741 80 x 50 7633706841 7633726841 7633893521

100 x 40 7633706931 7633726931 100 x 50 7633707041 7633727041 7633893681 100 x 80 7633707141 7633727141 7633893761 150 x 50 7679683641 150 x 80 7633707441 7633727441 7633893841 150 x 100 7633707541 7633727541 7633893921

Comp.name Description

BNIP Branch fitting plain BNLF Branch fitt light-weight flgd BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw

PIPING CLASS – 013411Z , PAGE 4 OF 5

Branch Run pipe BNIP BNLF 15 40 - 40 ----------Note 1-------------->

----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1-------------->

15 50 - 50 15 80 - 150 20 50 - 50 20 80 - 100 20 150 - 150 25 80 - 80 25 100 - 100 25 150 - 150 40 80 - 80 40 100 - 100 40 150 - 150


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138611531 20 4 1/2 x 70 8138611551 25 4 1/2 x 70 8138611551 40 4 1/2 x 80 8138611571 50 4 5/8 x 90 8138612711 80 4 5/8 x 100 8138612731 100 8 5/8 x 100 8138612731 150 8 3/4 x 110 8138613301 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138611641 20 4 1/2 x 120 8138611641 25 4 1/2 x 130 8138611671 40 4 1/2 x 130 8138611671 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138612781 80 8 3/4 x 140 8138613351 100 8 3/4 x 150 8138613371 150 12 3/4 x 150 8138613371

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 70 8138611551 20 4 1/2 x 80 8138611571 25 4 1/2 x 80 8138611571 40 4 1/2 x 80 8138611571 50 4 5/8 x 100 8138612731 80 4 5/8 x 110 8138612741 100 8 5/8 x 110 8138612741 150 8 3/4 x 120 8138613321



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 013421X Design limits Temperature (°C) -100 0 50 100 150 200 205 Pressure (Bar ga) DN 15-300 and DN 1050

19.0 19.0 18.4 16.2 14.8 13.7 13.5

Notes -

Intended for vent gas,scale Inhibitor, Corrosion Inhibitor, deoiler, Drain, l & Bactericide services, and chemicals. Design limits acc. to ASME B16.5 flange rating mat. grp 2.2 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).

- For bending of pipe see DEP 31.38.01.31-Gen. - For basis of design see DEP 31.38.01.10-Gen. - When chlorides are present in the process fluid in conjunction with free oxygen, the max.



The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality.

Table of schedules

DN Schedule 15 40S 20 40S

25 10S 40 10S 50 10S 80 10S

100 10S 150 10S 200 10S


15 20 25 40 50 80 100 150 200

200 C C C C E E B B A 150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications Stainl steel AISI 316L Sour Plant Qusahwira Phase II FEED

Class no. 013421X Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395



Pipe Pipe

DN 15-300 DN 1050

ASTM A312-TP316L ASTM A358 GR 316L CL1

Flanges BLFL Blind flange DN 15-1050 ASTM A182-F316 LJFL Lap joint flange DN 40-40 ASTM A182-F316 SBFL SPFL

Spectacle blind Spade

DN15- 300 DN 1050-1050

ASTM A240-GR 316 ASTM A240-GR 316

SPRT Spacer DN 1050-1050 ASTM A240-GR 316 WNFL Welding neck flange DN15-1050

ASTM A182-F316

Fittings CAPB Cap bw DN15-300 ASTM A403-WP316L E45B E45B


DN15-300 DN 1050-1050

ASTM A403-WP316L ASTM A403-WP316L-W

E90B E90B


DN15-300 DN 1050-1050


TEEB TEEB


DN15-300 DN 1050 -1050


Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A182-F316 BROB Branch outlet bw DN 150-300 ASTM A182-F316 RECB Reducer concentric bw DN 20-250 ASTM A403-WP316L REEB Reducer eccentric bw DN 20-300 ASTM A403-WP316L TERB Tee reducing bw DN 20-300 ASTM A403-WP316L BNIF Branch fitting flgd DN 25-40 ASTM A182-F316

PIPING CLASS – 013421X , Page 2 of 5 Valves Data Sheet No BAFF VF.013421X.21 Ball valve 17292 flgd DN 15-150

Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, PTFE

BAFF VF.013421X.22


DN 200-300

Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, PTFE

BARF VB.013421X.21 BARF VB.013421X.22

Ball valve 17292 flgd Ball valve 14313 flgd

DN 15-150 DN 200-300

Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, PTFE Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, PTFE

CHDF VC.013421X.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A351-CF8M/A182-F316 Trim: Monel K500, Stellite 6

CHDF VC.013421X.23 Check valve dual plate double flgd DN 200-300

Body: ASTM A351-CF8M /A182-F316 Trim: Monel K500, Stellite 6

CHVF VC.013421X.21 Check valve flgd (Piston lift type) DN 15-40

Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, Stellite 6

GAVF VG.013421X.21 Gate valve flgd DN 15-300

Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, Stellite 6

GLVF VL.013421X.21 NDVF VN.013421X.21

Globe valve flgd Needle Valve flgd

DN 15-200 DN 50-50

Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, Stellite 6 Body: ASTM A 182-F316/A351-CF8M Trim: Monel K500, Stellite 6

VDBT VDB.013421X.21

Double block and bleed Valve DN 15-50

Body: ASTM A182-F316 Trim: Monel K500, PTFE

Miscellaneous GKSW Gasket spiral wound DN 15-1050 AISI 316, graphite filled

CS centring-/SS inner ring

MTRR Meterrun DN 15-40 Alloy 400/AISI 316 end flanges ORFS Orifice flange set DN 50-300

ASTM A182-F316 For DN 50-80 (600 Lbs) For DN 100 & above (300 Lbs)



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS- 013421X, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 1050 Item description MESC Pipe Pipe 743633 0181 0261 0331 0491 0571 0651 0731 0821 0911 1031 1151 Note1

Fittings Cap bw 763319 2861 2961 3041 3241 3341 3541 3741 3931 4041 4171 4331 Note1 Elbow 45 deg bw 763337 2861 2961 3041 3241 3341 3541 3741 3931 4041 4171 4331 Note1 Elbow 90 deg bw 763341 2861 2961 3041 3241 3341 3541 3741 3931 4041 4171 4331 Note1 Tee equal bw 763384 7861 7961 8041 8241 8341 8541 8741 8931 9041 4171 4331 Note1 Valves Ball valve 14313 flgd 770374 5151 5161 5171 Ball valve 14313 flgd 770374 0151 0161 0171 Ball valve 17292 flgd 770326 5031 5041 5051 5071 5081 5101 5121 5131 Ball valve 17292 flgd 770326 0031 0041 0051 0071 0081 0101 0121 0441 Check valve dual plate double flgd 776814 0151 0161 0171 Check valve dual plate Lug type Check valve flgd Piston lift type

NOTE 1 NOTE 1

Gate valve flgd 772303 0031 0041 0051 0071 3081 3101 3121 3141 3151 3161 3171 Globe valve flgd Double block and bleed Valve

773303 0031 0041 0051 0071 0081 0101 0121 0141 0151 NOTE 1

Miscellaneous Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 Note1 Meterrun Note1 Note1 Note1 Note1 Note1 Orifice flange set 766592 4911 4931 4011 4021 4031 4041 4051 NOTE 1: NEW MESC NO WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION.

Flanges Blind flange 766510 3121 3141 3161 3181 3201 3221 3241 3261 3281 3301 3321 Note1 Spectacle blind Spade Spacer

768810 1581 1621 1661 1681 1701 1721 1741 1761 1781 1801

1821 Note1 Note1

Welding neck flange

766579 2621 2641 2061 2081

2101 2121 2141 2161 2181 2201 2221 Note1

Lap joint Flange 766520 4181



20 x 15 7633705661 7633725661 7633856181 25 x 15 7633705791 7633725791 7633856321 25 x 20 7633705891 7633725891 7633856371 40 x 15 7633705991 7633725991 40 x 20 7633706191 7633726191 7633856491 40 x 25 7633706241 7633726241 7633856561 50 x 20 7636500901 7636630901 50 x 25 7633706341 7633726341 7633856721 50 x 40 7633706441 7633726441 7633856831 80 x 40 7633706741 7633726741 80 x 50 7633706841 7633726841 7633893521


Comp.name Description BNIP Branch fitting plain BNLF Branch fitt light-weight flgd BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw


1050 x 50 NOTE1 1050 x 80 NOTE1 1050 x 100 NOTE1 1050 x 150 NOTE1 1050 x 200 NOTE1 1050 x 250 NOTE1 1050 x 300 NOTE1 1050 x 350 NOTE1 1050 x 400 NOTE1 1050 x 450 NOTE1 1050 x 500 NOTE1 1050 x 600 NOTE1 NOTE1 NOTE1 1050 x 650 NOTE1 NOTE1 NOTE1 1050 x 700 NOTE1 NOTE1 NOTE1 1050 x 750 NOTE1 NOTE1 NOTE1 1050 x 900 NOTE1 NOTE1 NOTE1

PIPING CLASS- 013421X, Page 4 of 5

Branch Run pipe BNIP BNLF 15 40 - 40 Note1 Note1 15 50 - 50 Note1 Note1 15 80 - 200 Note1 Note1 15 250 - 1050 Note1 Note1 20 50 - 50 Note1 Note1 20 80 - 100 Note1 Note1 20 150 - 300 Note1 Note1 20 350 - 1050 Note1 Note1 25 80 - 80 Note1 Note1 25 100 - 100 Note1 Note1 25 150 - 250 Note1 Note1 25 300 - 1050 Note1 Note1 40 80 - 80 Note1 Note1 40 100 - 100 Note1 Note1 40 150 - 150 Note1 Note1 40 200 - 300 Note1 Note1 40 350 - 1050 Note1 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138671531 20 4 1/2 x 70 8138671551 25 4 1/2 x 70 8138671551 40 4 1/2 x 80 8138671571 50 4 5/8 x 90 8138672711 80 4 5/8 x 100 8138672731 100 8 5/8 x 100 8138672731 150 8 3/4 x 110 8138673301 200 8 3/4 x 110 8138673301 250 12 7/8 x 120 8138674011 300 12 7/8 x 120 8138674011 350 12 1 x 140 8138674691 400 16 1 x 140 8138674691 450 16 1 1/8 x 150 8138675291 500 20 1 1/8 x 160 8138675301 600 20 1 1/4 x 180 8138675901 900 32 1 1/2 x 270 Note 1 1050 36 1 1/2 x 300 Note 1 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 1/2 x 120 8138661641 25 4 1/2 x 130 8138661661 40 4 1/2 x 130 8138661661 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 3/4 x 150 8138663371 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381 350 20 1 1/8 x 220 8138665401 400 20 1 1/4 x 230 8138665981 450 24 1 1/4 x 250 8138666091 500 24 1 1/4 x 260 8138666031 600 24 1 1/2 x 290 8138666801





CLASS 016620X Design limits Temperature (°C) -45 0 50 75 100 150 Pressure (Bar ga) DN 15- 150 20.0 20.0 19.5 18.6 17.7 15.8 DN 200- 400 19.6 19.6 19.2 18.4 17.7 15.8 Notes - -

Intended for produced water,Nitrogen & process oil services. DN 15-150: Design limits acc. to ASME B16.5 flange rating mat. grp 3.8

- DN 200-300: Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 - For basis of design see DEP 31.38.01.10-Gen. - Piping class contains a combination of solid Incoloy and carbon steel with incoloy clad material - The use of red. bore ball valves is considered most economical. Use full bore ball valves only when



Table of schedules SOLID INCOLOY CLADDED (BASE MAT LTCS)

DN Schedule DN Schedule 15 40S 200 60 (NOTE1)

20 40S 250 XS (NOTE1) 25 10S 300 STD (NOTE1) 40 10S 50 10S 80 10S

100 10S 150 10S 200 10S(NOTE-2) 250 10S (NOTE-2) 300 10S (NOTE-2)

NOTE 1- LTCS pipe thickness is increased to min 9.53 mm to suit cladding of UNS N08825, based on clading vendor requirement NOTE 2- Solid incoloy thickness for DN 200 to 300 are applicable only for solid incoloy reducing fittings


15 20 25 40 50 80 100 150 200 250 300

300 - - C C E E E B B B A 250 - - C C E E B B B A 200 - - C C E E B B A 150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A


COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe

Incoloy Alloy 825 LT Sour Plant Qusahwira Phase Ii FEED Class no. 016620X Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPE Pipe DN 15-150 ASTM B423 UNS N08825 PIPE Transition

Pipe Pipe

DN 200-400 DN 200-400

ASTM A333-6 + Clad UNS N08825 ASTM B423 UNS N08825 For PUP piece only (NOTE-3)

Flanges BLFL Blind flange DN 15-150 ASTM B564 UNS N08825 BLFL Blind flange DN 200-400 ASTM A350-LF2 + Clad UNS N08825 LJFL Lap joint flange DN 50-50 ASTM B564 UNS N08825 SBFL Spectacle blind DN 15-300 ASTM B424 UNS N08825 SPFL Spade DN 350-400 ASTM B424 UNS N08825 SPRT Spacer ring DN 350-400 ASTM B424 UNS N08825 WNFL Welding neck flange DN 15-150 ASTM B564 UNS N08825 WNFL Welding neck flange DN 200- 300 ASTM A350-LF2 + Clad UNS N08825 Fittings CAPB Cap bw DN 15-150 ASTM B366-WPNICMC CAPB Cap bw DN 200-400 ASTM A420-WPL6 + Clad UNS N08825 E45B Elbow 45 deg bw DN 15-150 ASTM B366-WPNICMC E45B Elbow 45 deg bw DN 200-400 ASTM A420-WPL6 + Clad UNS N08825 E90B Elbow 90 deg bw DN 15-150 ASTM B366-WPNICMC E90B Elbow 90 deg bw DN 200-400 ASTM A420-WPL6 + Clad UNS N08825 TEEB Tee equal bw DN 15-150 ASTM B366-WPNICMC TEEB Tee equal bw DN 200-400 ASTM A420-WPL6 + Clad UNS N08825 Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM B564 UNS N08825 BROB Branch outlet bw DN 150-400 ASTM B564 UNS N08825 BROB Branch outlet bw DN 400-400 ASTM A420-WPL6 + Clad UNS N08825 RECB Reducer concentric bw DN 250 -400 ASTM A420-WPL6 + Clad UNS N08825 REEB Reducer eccentric bw DN 20-350 ASTM B366-WPNICMC REEB Reducer eccentric bw DN 250-400 ASTM A420-WPL6 + Clad UNS N08825 TERB Tee reducing bw DN 20-300 ASTM B366-WPNICMC TERB BNIF


DN 250-400 DN 25-50

ASTM A420-WPL6 + Clad UNS N08825 ASTM B564 UNS N08825

NOTE 3- Transition pipe shall be used as a transition piece between solid incoloy 825 reducing fittings (larger size 200-300) and cladded pipes (DN 200-300). Ends of this transition piece shall be prepared in fabrication shop to suit solid incoloy pipe thickness on one end & cladded pipe thickness (including clad thickness ) on other end. Pup piece thickness for size 200 to 400 shall be 15mm.

PIPING CLASS – 016620X , Page 2 of 5 Valves Data Sheet No.

BAFF VF.016620X.21 Ball valve 17292 flgd DN 15-150 Body: ASTM B564 UNS N08825/A494-Cu5MCuC Trim: Alloy 825, PTFE BAFF VF.016620X.22 Ball valve 14313 flgd DN 200-400 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825 Trim: Alloy 825, PTFE BARF VB.016620X.21 Ball valve 17292 flgd DN 15-150 Body: ASTM B564 UNS N08825/A494-Cu5MCuC Trim: Alloy 825, PTFE BARF VB.016620X.22 Ball valve 14313 flgd DN 200-400 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825 Trim: Alloy 825, PTFE CHDF VC.016620X.23 Check valve dual plate double

flgd DN 200-400 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825

Trim: Alloy 825, Stellite 6 CHVF VC.016620X.21 Check valve flgd (Piston lift

type) DN 15-40 Body: ASTM B564 UNS N08825/A494-Cu5MCuC

Trim: Alloy 825, Stellite 6 CHVF VC.016620X.22 Check valve dual plate Lug type

DN 50-150 Body: ASTM B564 UNS N08825/A494-Cu5McuC

Trim: Alloy 825, Stellite 6 GABF VG.016620X.21 Gate valve bellows seal flgd DN 15-40 Body: ASTM B564 UNS N08825/A494-Cu5MCuC Trim: Alloy 825, Stellite 6 GAVF VG.016620X.23 Gate valve flgd DN 200-400 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825 Trim: Alloy 825, Stellite 6 GAVF VG.016620X.22 Gate valve flgd DN 50-150 Body: ASTM B564 UNS N08825/A494-Cu5MCuC Trim: Alloy 825, Stellite 6 GLBF VL.016620X.21 Globe valve bellows seal flgd DN 15-40 Body: ASTM B564 UNS N08825/A494-Cu5MCuC Trim: Alloy 825, Stellite 6 GLVF VL.016620X.23 Globe valve flgd DN 200-200 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825 Trim: Alloy 825, Stellite 6 GLVF VL.016620X.22 Globe valve flgd DN 50-150 Body: ASTM B564 UNS N08825/A494-Cu5MCuC Trim: Alloy 825, Stellite 6 NDVF VN.016620X.21 Needle valve flgd DN 15-15 Body: ASTM B564 UNS N08825/A494-Cu5MCuC Trim: Alloy 825, Stellite 6 VDBTVDB.016620X.21

Double block and bleed Valve

DN 15-50

Body: ASTM B564 UNS N08825 Trim: Alloy 825, PTFE

Miscellaneous GKSW Gasket spiral wound DN 15-400 Alloy 825, graphite filled CS centring ring/Alloy 825 inner ring MTRR Meterrun DN 15-40 Alloy 825 ORFS Orifice flange set DN 50-400 ASTM B564 UNS N08825


STBT Studbolt with nuts --- ASTM A320-L7M/A194-7M STYB Strainer Y-type DN 50-400 Sieve: UNS N08825


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS-016620X, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 Item description MESC Pipe Pipe 747861 0181 0261 0331 0491 0571 0651 0751 0841 Pipe 749100 1101 1341 Note1 1841 2161 Flanges Blind flange 766000 0011 0021 0031 0041 0051 0061 0071 0081 Blind flange 769127 0091 0101 0111 0121 131 Spectacle blind 768825 0021 0031 0041 0051 0061 0071 0081 0091 0101 0111 0121 Spacer ring 768820 8131 8141 Spade 768899 0131 0141 Welding neck flange 766078 0221 0231 0031 0051 0061 0081 0101 0121 Welding neck flange 769140 3951 3961 Note1 Note1 Note1 Lap Joint Flange Note1

Valves Ball valve 14313 flgd 770092 8151 8161 8171 8181 8191 Ball valve 14313 flgd 770092 0151 3161 3171 3181 3191 Ball valve 17292 flgd 770655 5031 5041 5051 5071 5081 5101 5121 5131 Ball valve 17292 flgd 770025 0031 0041 0051 0071 0081 0101 0121 0441 Check valve dual plate double flgd 776724 0151 0161 0171 0181 0191 Check valve dual plate Lug type NOTE 1 Check valve flgd Piston lift type NOTE 1 Gate valve bellows seal flgd NOTE 1 Gate valve flgd 772641 0031 0041 0051 0071 3081 3101 3121 3141 Gate valve flgd 772056 6151 6161 6171 6181 6191 Globe valve bellows seal flgd NOTE 1 Globe valve flgd 770025 0031 0041 0051 0071 3081 3131 3121 3141 Globe valve flgd Double block and bleed Valve

773055 9151 NOTE 1

Needle Valve flgd NOTE 1 Miscellaneous Gasket spiral wound 854360 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 Meterrun 766496 1521 1541 1561 1581 Orifice flange set 766096 1011 1021 0011 0021 Note1 Note1 Note1 0231 0241 Strainer Y-type NOTE1 NOTE 1: NEW MESC NO WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION.

Fittings Cap bw 762817 0361 0461 0541 0741 0841 1041 1241 1441 Cap bw 769112 1101 1341 Note1 1841 2161 Elbow 45 deg bw 762837 0361 0461 0541 0741 0841 1041 1241 1441 Elbow 45 deg bw 769117 1101 1341 Note1 1841 2161 Elbow 90 deg bw 762842 0361 0461 0541 0741 0841 1041 1241 1441 Elbow 90 deg bw 769122 1101 1341 Note1 1841 2161 Tee equal bw 762887 0361 0461 0541 0741 0841 1041 1241 1441 Tee equal bw 769183 1101 1341 Note1 1841 2161



20 x 15 7628670661 7628750661 7628926181 25 x 15 7628670791 7628750791 7628926321 25 x 20 7628670891 7628750891 7628926371 40 x 15 7628670991 7628750991 40 x 20 7628671191 7628751191 7628926471 40 x 25 7628671241 7628751241 7628926721 50 x 20 7628671311 7628751311 50 x 25 7628671341 7628751341 7628926771 50 x 40 7628671441 7628751441 7628926831 80 x 40 7628671741 7628751741 80 x 50 7628671841 7628751841 7628926891

100 x 40 7628671941 7628751941 100 x 50 7628672041 7628752041 7628926921 100 x 80 7628672141 7628752141 7628926961 150 x 50 7677350071 150 x 80 7628672441 7628752441 7628926981 150 x 100 7628672541 7628752541 7628927021 200 x 50 Note 1 200 x 80 Note 1 200 x 100 Note 1 Note 1 Note 1 200 x 150 Note 1 Note 1 Note 1 250 x 50 Note 1 250 x 80 Note 1 250 x 100 Note 1 Note 1 Note 1 250 x 150 Note 1 Note 1 Note 1 250 x 200 Note 1 Note 1 Note 1 300 x 50 Note 1 300 x 80 Note 1 300 x 100 Note 1 300 x 150 7628670041 7628750041 7628927131 300 x 200 7691514691 7691624691 7691884691 300 x 250 7691514901 7691624901 7691884901 350 x 50 7679057371 350 x 80 7679057471 350 x 100 7679043011 350 x 150 7679043111 7629456001 7629606001 350 x 200 7629456351 7629606351 7631883971 350 x 250 7631664311 7631754311 7631884211 350 x 300 7631664441 7631754441 7631884471

Comp.name Description BNIP Branch fitting plain BNLF Branch fitt light-weight flgd BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw NOTE 1: NEW MESC NO WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION.

Run x Br BROB RECB REEB TERB 400 x 80 7677351621 400 x 100 7677351711 400 x 150 7677351791 400 x 200 7691001161 7691516191 7691626191 400 x 250 7691516401 7691626401 7691886401 400 x 300 7691516491 7691626491 7691886491 400 x 350 7691516701 7691626701 7691886701


Branch Run pipe BNIP BNLF 15 40 - 40 NOTE1 NOTE1 15 50 - 50 NOTE1 NOTE1 15 80 - 150 NOTE1 NOTE1 20 50 - 50 NOTE1 NOTE1 20 80 - 150 NOTE1 NOTE1 25 80 - 80 NOTE1 NOTE1 25 100 - 100 NOTE1 NOTE1 25 150 - 250 NOTE1 NOTE1 25 300 - 400 NOTE1 NOTE1 40 80 - 80 NOTE1 NOTE1 40 100 - 100 NOTE1 NOTE1 40 150 - 150 NOTE1 NOTE1 40 200 - 300 NOTE1 NOTE1 40 350 - 400 NOTE1 NOTE1 50 80 - 400 NOTE1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138671531 20 4 1/2 x 70 8138671551 25 4 1/2 x 70 8138671551 40 4 1/2 x 80 8138671571 50 4 5/8 x 90 8138672711 80 4 5/8 x 100 8138672731 100 8 5/8 x 100 8138672731 150 8 3/4 x 110 8138673301 200 8 3/4 x 110 8138673301 250 12 7/8 x 120 8138674011 300 12 7/8 x 120 8138674011 350 12 1 x 140 8138674691 400 16 1 x 140 8138674691 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138671641 20 4 1/2 x 120 8138671641 25 4 1/2 x 130 8138671661 40 4 1/2 x 130 8138671661 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 3/4 x 150 8138673371 150 12 3/4 x 150 8138673371 200 12 7/8 x 170 8138674091 250 16 1 x 190 8138674771 300 16 1 1/8 x 210 8138675381 350 20 1 1/8 x 220 8138675401 400 20 1 1/4 x 230 8138675981

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 70 8138671551 20 4 1/2 x 80 8138671571 25 4 1/2 x 80 8138671571 40 4 1/2 x 80 8138671571 50 4 5/8 x 100 8138672731 80 4 5/8 x 110 8138672741 100 8 5/8 x 110 8138672741 150 8 3/4 x 120 8138673321 200 8 3/4 x 130 8138673341 250 12 7/8 x 140 8138674041 300 12 7/8 x 150 8138674061 350 12 1 x 160 8138674721 400 16 1 x 170 8138674741



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 017011U Design limits Temperature (°C) 0 105 Pressure (Bar ga) DN 80-600

19.6 17.51

Notes - Intended for Drain,tundish drain,Process oil and Sewage Drain services. - Joints shall be adhesive bonded, either taper-taper or coated and wrapped. - Piping material: glass reinforced epoxy resin (GRE) aromatic amine, hot cured, tg > 140 deg C. - For basis of design see DEP 31.38.01.10-Gen &.AWWA M 350 - For requirements regarding GRP piping systems, see DEP 31.40.10.19-Gen & ADCO supplement

to shell DEP 31.40.10.19. - Bolts for GRP flanges to be provided with washers - Flanges to be drilled acc. to ASME B16.5, class 150# - Bolt sets not shown in piping class; flange thickness differs per manufacturer - Fasteners in Valves for underground Buried service shall be PTFE coated. Table of schedules

DN Schedule 80 4.0 mm

100 4.0 mm 150 4.4 mm 200 5.5 mm 300 7.8 mm 400 10 mm 500 12.3 mm 600 14.5mm

PIPING CLASS – 017011U , Page 1 of 4 Branch connections 90 degrees All branch conncetions will be made with factory-wound fittings. No branch connection will be less than 2/3 of the run pipe NPS. Further reductions in branch size will be made within the branch itself. Branch Size Run size 80 100 150 200 300 400 500 600

600 B B B B B B B A 500 B B B B B B A 400 B B B B B A 300 B B B B A 200 B B B A 150 B B A 100 B A

80 A

Code Explanation of characters

A Equal tee B Reducing tee

GRE-Aromatic amine Sour Plant Qusahwira Phase II FEED Class no. 017011U Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe (TB/TS) DN80-600

GRE-AROMATIC AMINES ASTM D2996

Flanges BLFL Blind flange (FF) DN 80-600 GRE-AROMATIC AMINES ASTM D2996

FL Flange (TB/FF) DN 80-600 GRE-AROMATIC AMINES ASTM D2996

Fittings E45TB Elbow 45 deg (TB/TB) DN 80-600


E90TB Elbow 90 deg (TB/TB) DN 80-600


TEETB Tee equal (TB/TB-TB) DN 80-600


T45TB Equal Wye (Mitered) (TB/TB-TB)

DN 80-600

GRE-AROMATIC AMINES ASTM D2996 (Mitered)

Reducing fittings (Refer branch table for size range of all reducing branch fittings) R45TB Unequal Wye (Mitered)

(TB/TB-TB) DN 80-600


REETB Reducer eccentric (TB/TB) DN 80-600


TERTB Tee reducing (TB/TB) DN 80-600


PIPING CLASS – 017011U , Page 2 of 4 Valves Data Sheet No. BAFF VF.017011X.21 Ball Valve 17292 flgd DN 80-150 Body: ASTM B564 N08825, Trim: Alloy 825, PTFE BAFF VF.017011X.22 Ball Valve 14313 flgd DN 200-600 Body: ASTM B564 N08825, CHDP VC.017011X.23

Check valve dual plate double flgd

DN 200-600

Trim: Alloy 825, PTFE Body: ASTM B564 N08825, Trim: Alloy 825, Stellite 6

CHWP VC.017011X.22 Check valve dual plate lug DN 80-150 Body: ASTM B564 N08825 Trim: Alloy 825, Stellite 6 Miscellaneous GKRP Gasket flat ring FF DN 80-600

Ethylene propylene rubber (EPDM) hardness 70+/-5 shore A

WABL Washer (black) ASTM A307-B STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS -017011U, PAGE 3 OF 4 Nominal pipe size 80 100 150 200 250 300 350 400 450 500 600 Item description MESC Valves Ball Valve 17292 flgd 770322 3101 3121

NOTE 1 0151 0161 0171 0181 0191 0201 0211 0231 0101 0121 0141

Ball Valve 14313 flgd Check valve dual plate double flgd 776865 Check valve dual plate Lug type 776826 Miscellaneous Gasket flat ring 854810 0181 0201 0241 0261 0281 0301 0321 0341 0361 0381 0421


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING PIPING CLASS -017011U, PAGE 4 OF 4 Boltset standard flange DN nr Inch x (Metal to GRE)

mm MESC number (GRE to GRE)

mm MESC number

80 4 5/8 x 130 8138662781 150 8138662811 100 8 5/8 x 130 8138662781 150 8138662811 150 8 ¾ x 150 8138663371 180 8138663411 200 8 ¾ x 170 8138663401 230 8138663491 250 12 7/8 x Note 2 Note 2 300 12 7/8 x 200 8138664131 270 8138664251 350 12 1 x Note 2 Note 2 400 16 1 x 250 8138664861 360 Note 1 450 16 1 1/8 x Note 2 Note 2 500 20 1 1/8 x 280 8138665491 400 8138665681 600 20 1 1/4 x 330 8138666141 490 8138666357

Boltset blind/spacer DN nr Inch x (Metal to GRE)


mm MESC number

80 4 5/8 x 140 Note 1 160 8138662861 100 8 5/8 x 140 Note 1 160 8138662861 150 8 ¾ x 160 8138663381 190 8138663431 200 8 ¾ x 190 8138663431 250 8138663521 250 12 7/8 x Note 2 Note 2 300 12 7/8 x 230 8138664181 300 Note 1 350 12 1 x Note 2 Note 2 400 16 1 x 280 8138664911 390 Note 1 450 16 1 1/8 x Note 2 Note 2 500 20 1 1/8 x 320 813866551 440 Note 1 600 20 1 1/4 x 370 813866201 530 Note 1

NOTE 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION. NOTE 2: VENDOR DATA NOT AVAILABLE AND/OR SIZE NOT USED.


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 017015U Design limits Temperature (°C) 0 85 Pressure (Bar ga) DN 50- 400

19.6 18.15

Notes - Intended for fire water ,potable water services. - Joints shall be per manufacturer’s standard. - Piping material: glass reinforced epoxy resin (GRE) alphatic amine, hot cured, tg > 115 deg C,

executed with aluminium foil barrier & with a 1.5 mm UV resistant outer resin layer for potable water service .

- For basis of design see DEP 31.38.01.10-Gen. - For requirements regarding GRP piping systems, see DEP 31.40.10.19-Gen & ADCO supplement

to shell DEP 31.40.10.19. - Bolts for GRP flanges to be provided with washers - Flanges to be drilled acc. to ASME B16.5, class 150 - - - -

Bolt sets not shown in piping class; flange thickness differs per manufacturer All valves in Fire water service shall be UL/FM Approved.. All Aluminium bronze valves shall be of 300# rating and corresponding mating flange shall be of 300# rating Minimum line size for underground buried GRE line is DN 50.

Table of schedules

DN Schedule 50 4.0 mm 80 4.0 mm

100 4.0 mm 150 4.0 mm 200 4.4 mm 300 6.1 mm 400 7.6 mm

PIPING CLASS – 017015U , Page 1 of 4 Branch connections 90 degrees All branch conncetions will be made with factory-wound fittings. No branch conncetion will be less than 2/3 of the run pipe NPS. Further reductions in branch size will be made within the branch itself. Branch Size Run size

50 80 100 150 200 300 400

400 B B B B B B A 300 B B B B B A 200 B B B B A 150 B B B A 100 B B A 80 B A 50 A

Code Explanation of characters

A Equal tee B Reducing tee

GRE-Aliphatic amine Plant Qusahwira Phase Ii FEED Class no. 017015U Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe (TB/TS) DN 50-400

GRE-ALIPHATIC AMINES ASTM D2996

Flanges BLFL Blind flange (FF) DN 50-400 GRE-ALIPHATIC AMINES ASTM D2996

FL Flange (TB/FF) DN 50-400 GRE-ALIPHATIC AMINES ASTM D2996

Fittings E45TB Elbow 45 deg (TB/TB) DN 50-400


E90TB Elbow 90 deg (TB/TB) DN 50-400


TEETB Tee equal (TB/TB-TB) DN 50-400


Reducing fittings (Refer branch table for size range of all reducing branch fittings)

REETB Reducer eccentric (TB/TB) DN 50-400


TERTB Tee reducing (TB/TB) DN 50-400


PIPING CLASS – 017015U , Page 2 of 4 Valves Data Sheet No. BAFF VF.017015U.21 Ball valve 17292 flgd DN 50-100 Body: ASTM B148-UNS C95200 Trim: Aluminum Bronze, PTFE or PFA BARF VB.017015U.21 BARF VB.017015U.22


DN 150-150 DN 200-400

Body: ASTM B148-UNS C95200 Trim: Aluminum Bronze, PTFE or PFA Body: ASTM B148-UNS C95200

Trim: Aluminum Bronze, PTFE or PFA BUWP VY.017015U.21 Butterfly valve lug type FF DN 80-400

Body: ASTM A105N/A216 WCB/WCC lined with Chloroprene Rubber or EPDM

Disc: B148 C95800 Seats: EPDM or Chloroprene Rubber CHDF VC.017015U.23


DN 200-400 Body: ASTM B148-UNS C95200 Disc & seat: B148 C95800, EPDM

CHSF VC.017015U.24 Check valve Swing type flgd DN 50-400

Body: ASTM B148-UNS C95200 Disc & seat : Aluminum Bronze,EPDM

CHWP VC.017015U.22

Check valve dual plate lug FF

DN 50-150

Body: ASTM B148-UNS C95200 Disc & seat: B148 C95800, EPDM

PIVF Post Indicatot valve DN 300-400 Body: ASTM A105N/A216 WCB/WCC lined with Chloroprene Rubber or EPDM

Disc: B148 C95800 Miscellaneous GKRP Gasket flat ring FF DN 50-400

Ethylene propylene rubber (EPDM) hardness 70+/-5 shore A

WABL Washer (black) ASTM A307-B STBT Studbolt with nuts --- ASTM A193-B7/A194-2H


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS-017015U, PAGE 3 OF 4

Miscellaneous Gasket flat ring 854810 0141 0181 0201 0241 0261 0281 0301 0321 0341

Nominal pipe size 50 80 100 150 200 250 300 350 400 Item description MESC

Valves

Ball valve 17292 flgd 770322 NOTE 1 NOTE 1 NOTE 1 5101 5121 5141 5151 5161 5171 0151 0161 0171 0181 0191 NOTE 1 NOTE 1 NOTE 1

Ball valve 17292 flgd 770322 Ball valve 14313 flgd Butterfly valve lug type FF 775056 Check valve dual plate double flgd Check valve Swing type flgd Check valve dual plate lug FF Post Indicator Butterfly valve

776865


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING PIPING CLASS-017015U, PAGE 4 OF 4 Boltset standard flange DN nr inch x (Metal to GRE)


mm MESC number

50 4 5/8 x Note 2 80 4 5/8 x 130 8138612781 150 8138612811 100 8 5/8 x 130 8138612781 150 8138612811 150 8 3/4 x 140 8138613351 170 8138613401 200 8 3/4 x 160 8138613381 210 8138613461 250 12 7/8 x Note 2 Note 2 300 12 7/8 x 180 8138614101 230 8138614181 350 12 1 x Note 2 Note 2 400 16 1 x 230 8138614831 330 8138615001 450 16 1 1/8 x Note 2 Note 2

Boltset blind/spacer DN nr inch x (Metal to GRE)


mm MESC number

50 4 5/8 x Note 2 80 4 5/8 x 140 Note 1 160 Note 1 100 8 5/8 x 140 Note 1 160 Note 1 150 8 3/4 x 150 8138613371 180 8138613411 200 8 3/4 x 180 8138613411 230 8138613491 250 12 7/8 x Note 2 Note 2 300 12 7/8 x 210 8138614151 260 Note 1 350 12 1 x Note 2 Note 2 400 16 1 x 260 8138614881 360 8138615061 450 16 1 1/8 x Note 2 Note 2 NOTE 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION. NOTE 2: VENDOR DATA NOT AVAILABLE AND/OR SIZE NOT USED.



CLASS 018011X Design limits Temperature (°C) 0

85

Pressure (Bar ga) DN 15- 200 19.6 18.45 Notes - -

Intended for above ground potable water , instrument air, plant air & above ground raw water services. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1. Aluminium bronze valve design limits Acc to BS5154 .

- For basis of design see DEP 31.38.01.10-Gen. - Pre-fab carbon steel pipe spools shall be galvanized in accordance with ASTM A53 - Piston type check valves (DN 15-40) for horizontal mounting only - -

Transition from FBE Coated piping to galvanized piping or from galvanized to FBE COATED shall be achieved through a flanged connection. All flanged aluminum bronze valve shall be of 300 # rating & corresponding mating flange shall be 300 # rating.

Table of schedules

DN Schedule 15 80 20 80 25 80 40 80 50 80 80 40

100 40 150 40 200 250

20 20


15 20 25 40 50 80 100 150 200

200 - - - - C E B B A 150 - - - - C B B A 100 - - - - C B A 80 - - - - C A 50 B B B B A 40 B B B A 25 B B A 20 B A 15 A

Code Explanation of characters A Equal tee B Reducing tee C Branch fitting D Pipe to pipe

Carbon steel Galvanised Plant Qusahwira Phase Ii FEED Class no. 018011X Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-50 API 5L-B (galvanised) PISM Pipe (API 5L-B sml) DN 80-200 API 5L-B (sml) FBE Internal Coating PNTT Pipe nipple thrd ends L=50mm DN 15-25 API 5L-B (galvanised) PT75 Pipe nipple thrd ends L=75mm DN 15-50 API 5L-B (galvanised) PT99 Pipe nipple thrd ends L=100mm DN 15-50 API 5L-B (galvanised) Flanges BLFL Blind flange DN 15-200 ASTM A105N (galvanised) FLTR Flange thrd DN 15-50 ASTM A105N (galvanised) LJFL Lap joint flange DN 50-50 ASTM A182 F316 WNFL SBFL

Welding neck flange Spectacle blind

DN 80-200 DN 15-200

ASTM A105N FBE Internal Coating ASTM A105N (Galvanised)

Fittings CAPB Cap bw DN 80-200 ASTM A234-WPB FBE Internal Coating CAPT Cap thrd DN 15-50 ASTM A105N (galvanised) COUT Coupling thrd DN 15-50 ASTM A105N (galvanised)) E45B Elbow 45 deg bw DN 80-200 ASTM A234-WPB FBE Internal Coating E45T Elbow 45 deg thrd DN 15-50 ASTM A105N (galvanised) E90B Elbow 90 deg bw DN 80-200 ASTM A234-WPB FBE Internal Coating E90T Elbow 90 deg thrd DN 15-50 ASTM A105N (galvanised) PLUG Plug NPT DN 15-50 ASTM A105N (galvanised) TEEB Tee equal bw DN 80-200 ASTM A234-WPB FBE Internal Coating TEET Tee equal thrd DN 15-50 ASTM A105N (galvanised) UNIT Union thrd DN 15-50 ASTM A105N (galvanised) Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 50 -50 ASTM A105N (FBE Internal Coating) REBU Reducing bushing thrd DN 20-50 ASTM A105N (galvanised) RECB Reducer concentric bw DN 50-200 ASTM A234-WPB FBE Internal Coating RECT Reducer concentric thrd DN 20-50 ASTM A105N (galvanised) REEB Reducer eccentric bw DN 50-200 ASTM A234-WPB FBE Internal Coating TERB Tee reducing bw DN 80-200 ASTM A234-WPB FBE Internal Coating TERT Tee reducing thrd DN 20-50 ASTM A105N (galvanised)

PIPING CLASS – 018011X , Page 2 of 5 Valves Data Sheet No. BART VB.018011X.21 Ball valve 17292 RB NPT thrd 800# DN 15-50 Body: ASTM B148-UNS C95200 Trim: ASTM B148-UNS C95800, PTFE BARF VB.018011X.22 Ball valve 17292 flgd DN 80-150 Body: ASTM B148-UNS C95200 Trim: ASTM B148-UNS C95800, PTFE BAFT VF.018011X.21 Ball valve 17292 FB (DN 50) NPT

thrd 800# DN 15-50 Body: ASTM B148-UNS C95200

Trim: ASTM B148-UNS C95800, PTFE BAFF VF.018011X.22 Ball valve 17292 flgd DN 80-150 Body: ASTM B148-UNS C95200 Trim: ASTM B148-UNS C95800, PTFE BUWL VY.018011X.21 Butterfly valve lug type DN 80-150 Body: A105N/A216 WCB/WCC

rubber lined Disc: ASTM B148-UNS C95800 CHVT VC.018011X.21 Check valve thrd (Piston lift type) DN 15-50 Body: ASTM B148-UNS C95200 Trim: ASTM B148-UNS C95800 CHWL VC.018011X.22 Check valve dual plate lug DN 80-150 Body: ASTM B148-UNS C95200 Trim: ASTM B148-UNS C95800 GAVT VG.018011X.21 Gate valve NPT thrd DN 15-50 Body: ASTM B148-UNS C95200 Trim: ASTM B148-UNS C95800 GAVF VG.018011X.22 Gate valve flgd DN 80-150 Body: ASTM B148-UNS C95200 Trim: ASTM B148-UNS C95800 GLVT VL.018011X.21 Globe valve NPT thrd DN 15-50 Body: ASTM B148 UNS C95200 Trim: ASTM B148-UNS C95800 GLVT VL.018011X.22 Globe valve flgd DN 80-150 Body: ASTM B148-UNS C95200 Trim: ASTM B148-UNS C95800 VDBT VDB.018011X.21 Double block and bleed Valve DN 15-50 Body: ASTM B148 UNS C95200 Trim: ASTM B148-UNS C95800,PTFE Miscellaneous GKSW Gasket DN 15-200 Ethylene propylene rubber (EPDM) hardness 70+/-5 shore A STBT Studbolt with nuts --- ASTM A193-B7/A194-2H ST3B Strainer Y-type DN 50-200 Sieve: Aluminium Bronze


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS-018011X,Page 3 of 5 Nominal pipe size

15 20 25 40 50 80 100 150 200

Item description MESC Pipe Pipe 741308 0181 0231 0281 0381 0431 Pipe (API 5L-B sml) 741312 Note1 Note1 Note1 Note1 Pipe nipple thrd ends L=100mm 760656 0941 1341 1741 1941 2141 Pipe nipple thrd ends L=50mm 760656 0921 1321 1721 Pipe nipple thrd ends L=75mm 760656 0931 1331 1731 1931 2131 Flanges Blind flange 766215 0081 0121 0161 0181 0201 Note1 Note1 Note1 Note1 Flange thrd 766250 7581 7621 7661 7681 7701 Welding neck flange 766278 Note1 Note1 Note1 Note1 Lap joint joint flange

766520 4201

Fittings Cap bw 763019 Note1 Note1 Note1 Note1 Cap thrd 760618 0081 0121 0161 0181 0201 Coupling thrd 760628 0081 0121 0161 0181 0201 Elbow 45 deg LR bw 763038 Note1 Note1 Note1 Note1 Elbow 45 deg thrd 760638 0081 0121 0161 0181 0201 Elbow 90 deg LR bw 763040 Note1 Note1 Note1 Note1 Elbow 90 deg thrd 760639 0081 0121 0161 0181 0201 Plug NPT 760666 0081 0121 0161 0181 0201 Tee equal bw 763084 Note1 Note1 Note1 Note1 Tee equal thrd 760684 0081 0121 0161 0181 0201 Union thrd 760691 0081 0121 0161 0181 0201 Valves Ball valve 17292 FB thrd 800# Ball valve 17292 RB thrd 800# Ball valve 17292 FB Ball valve 17292 RB

Butterfly valve conc lug type NOTE 1 Check valve dual plate Lug type Check valve thrd Piston lift type Gate valve thrd Double block and bleed Valve Miscellaneous Gasket spiral wound Note1 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Strainers Note1 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Note1

Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING/PIPING COMPONENTS Run x Br REBU RECB RECT REEB REFT TERB TERT

20 x 15 7606141221 7606701221 7662611301 7606850261 25 x 15 7606141621 7606701621 7662611401 7606850341 25 x 20 7606141641 7606701641 7662611421 7606850361 40 x 15 7606141811 7606701811 7662611601 7606850441 40 x 20 7606141831 7606701831 7662611611 7606850461 40 x 25 7606141851 7606701851 7662611631 7606850481 50 x 15 7606142001 7606702001 7662611801 7606850541 50 x 20 7606142011 7606702011 7662611821 7606850561 50 x 25 7606142021 7606702021 7662611841 7606850581 50 x 40 7606142041 7606702041 7662611861 7606850601 80 x 40 Note1 Note1 80 x 50 Note1 Note1 Note1

100 x 40 Note1 Note1 Note1 100 x 50 Note1 Note1 Note1 100 x 80 Note1 Note1 Note1 150 x 80 Note1 Note1 Note1 150 x 100 Note1 Note1 Note1 200 X 50 Note1 Note1 Note1 200 X 80 Note1 Note1 Note1 200 X 100 Note1 Note1 Note1 200 X 150 Note1

Comp.name

Description

BNIF Branch fitting flgd BNIT Branch fitting thrd REBU Reducing bushing thrd RECB Reducer concentric bw RECT Reducer concentric thrd REEB Reducer eccentric bw REFT Reducing flange thrd cl 150 TERB Tee reducing bw TERT Tee reducing thrd

PIPING CLASS 018011X,Page 4 of 5

Branch Run pipe BNIF BNIT 15 40 - 40 7680370611 7680319821 15 50 - 50 7680370631 7680319831 15 80 - 200 Note1 Note1 20 50 - 50 7680370661 7680319861 20 80 - 100 Note1 Note1 20 150 - 200 7680370691 7680319881 25 80 - 80 Note1 Note1 25 100 - 100 Note1 Note1 25 150 - 200 7680370761 7680319921 40 80 - 80 Note1 Note1 40 100 - 100 Note1 Note1 40 150 - 150 Note1 Note1 50 80 - 200 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset API 609 wafer lug DN nr inch x mm MESC number 80 4 5/8 x 140 8138612661 100 8 5/8 x 160 8138612961 150 8 3/4 x 170 8138613401 Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138611531 20 4 1/2 x 70 8138611551 25 4 1/2 x 70 8138611551 40 4 1/2 x 80 8138611571 50 4 5/8 x 90 8138612711 80 4 5/8 x 100 8138612731 100 8 5/8 x 100 8138612731 150 8 3/4 x 110 8138613301 200 8 3/4 X 110 8138613301

Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 3/4 x 150 8138673371 150 12 3/4 x 150 8138673371 200 12 7/8 X 170 8138614771 Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 70 8138671551 20 4 1/2 x 80 8138671571 25 4 1/2 x 80 8138671571 40 4 1/2 x 80 8138671571 50 4 5/8 x 100 8138672731 80 4 5/8 x 110 8138672741 100 8 5/8 x 110 8138672741 150 8 3/4 x 120 8138673321 200 8 ¾ X 130 8138614041

PIPING CLASS-018011X,Page 5 of 5



Temperature (°C) -29 0 50 100 150 200 225 240 Pressure (Bar ga) DN 15-700

20.0 20.0 19.5 17.7 15.8 13.8 12.9 12.44

Notes -

Intended for process gas, vent gas, process drain, tundish drain, fuel gas, glycol drain, Process oil & Drain services. Design limits acc. to ASME B16.5 flange rating mat. grp 2.8(ASME B16.5 up to DN 600 and B16.47 for larger sizes).

- For bending of pipe see DEP 31.38.01.31-Gen. - For basis of design see DEP 31.38.01.10-Gen. - The use of red. bore ball valves is considered most economical. Use full bore ball valves only

when necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - -

The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality Pipe & fittings (DN 350 & above) to be welded with 100% X-ray. ASTM A995 Gr.5A to be used for casting of SDSS valves as pressure containing parts.

Table of schedules


100 10S 150 10S 200 10S 250 10S 300 10S 350 10S 400 10S 450 500

10S 10S


15 20 25 40 50 80 100 150 200 250 300 350 400 450 500



Stainless steel UNS S32750 Sour Plant Qusahwira Phase II FEED Class no. 018220X Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-300 ASTM A790-UNS S32750 PIPE Pipe DN 350-700 ASTM A790-UNS S32750 welded w/100% x-ray Flanges BLFL Blind flange DN 15-700 ASTM A182 Grade F53 LJFL Lap joint flange DN 40-40 ASTM A182 Grade F53 SBFL Spectacle blind DN 15-300 ASTM A182 Grade F53 SPFL Spade DN 350-700 ASTM A182 Grade F53 SPRT Spacer ring DN 350-700 ASTM A182 Grade F53 WNFL Welding neck flange DN 15-700 ASTM A182 Grade F53 Fittings CAPB Cap bw DN 15-700 ASTM A815 Grade WPS32750 E45B E45B E90B E90B TEEB TEEB

Elbow 45 deg bw Elbow 45 deg bw Elbow 90 deg bw Elbow 90 deg bw Tee equal bw Tee equal bw

DN 15-300 DN 350-700 DN 15-300 DN 350-700 DN15-300 DN 350-700

ASTM A815 Grade WPS32750 ASTM A815 Grade WP-WX32750 (100%RT) ASTM A815 Grade WPS32750 ASTM A815 Grade WP-WX32750 (100%RT) ASTM A815 Grade WPS32750 ASTM A815 Grade WP-WX32750 (100%RT)

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A182 Grade F53 BROB Branch outlet bw DN 150-700 ASTM A182 Grade F53 RECB RECB


DN 20-300 DN 350-700

ASTM A815 Grade WPS32750 ASTM A815 Grade WP-WX32750 (100%RT)

REEB REEB


DN 20-300 DN 350-700

ASTM A815 Grade WPS32750 ASTM A815 Grade WP-WX32750 (100%RT)

TERB TERB BNIF

Tee reducing bw Tee reducing bw Branch fitting flgd

DN 20-300 DN 350-700 DN 25-50

ASTM A815 Grade WPS32750 ASTM A815 Grade WP-WX32750 (100%RT) ASTM A182 Grade F53

PIPING CLASS – 018220X , Page 2 of 5 Valves Data Sheet No. BAFF VF.018220X.21 Ball valve 17292 flgd DN 15-150 Body: ASTM A182-F53/A995 Grade 5A

Trim: UNS32750, PTFE BAFF VF.018220X.22

Ball valve 14313 flgd DN 200-700 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, PTFE

BARF VB.018220X.21 BARF VB.018220X.22

Ball valve 17292 FB (DN 25) flgd

Ball valve 14313 FB (DN 600)

flgd

DN 15-150 DN 200-700

Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, PTFE Body: ASTM A182-F53/A995 Grade 5A

Trim: UNS32750, PTFE CHDF VC.018220X.23 Check valve dual plate double

flgd DN 200-700

Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750 , Stellite 6

CHVF VC.018220X.21 Check valve flgd (Piston lift type)

DN 15-40 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6

CHDF VC.018220X.22

Check valve dual plateLug type

DN 50-150 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6

GAVF VG.018220X.21 Gate valve flgd DN 15-700 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6 GLVF VL.018220X.21 Globe valve flgd DN 15-200 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6 NDVF VN.018220X.21 Needle Valve flgd DN 15-15 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6 VDBT VDB.018220X.21 Double block and bleed Valve DN 15-50

Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, PTFE

Miscellaneous

GKSW Gasket spiral wound

DN 15-700 Super Duplex SS, graphite filled CS centring-/Su Duplex SS inner ring

MTRR Meterrun DN 15-40 UNS32750 ORFS Orifice flange set DN 50-600 ASTM A182-F53




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS – 018220X, PAGE 3 OF 5 PIPING COMPONENTS Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 650 700 Item description MESC Pipe Pipe NOTE1 Flanges Blind flange NOTE 1

NOTE1 NOTE1 NOTE1 NOTE1 NOTE1

Spacer ring Spade Spectacle blind Welding neck flange Lapjoint Flange

Fittings NOTE1 Cap bw NOTE1

NOTE1 NOTE1

Elbow 45 deg bw Elbow 90 deg bw Tee equal bw Valves Ball valve 17292 flgd

NOTE 1

Ball valve 17292 flgd Ball valve 14313 flgd Ball valve 14313 flgd Check valve dual plate double flgd Check valve dual plate Lug type Check valve flgd Piston lift type Gate valve flgd Globe valve flgd Double block and bleed Valve Needle valve flgd Miscellaneous Gasket spiral wound NOTE1

NOTE1 NOTE1

Meterrun Orifice flange set NOTE 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION .


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING BRANCH COMPONENTS


20 x 15 NOTE1 NOTE1 NOTE1 25 x 15 NOTE1 NOTE1 NOTE1 25 x 20 NOTE1 NOTE1 NOTE1 40 x 15 NOTE1 NOTE1 NOTE1 40 x 20 NOTE1 NOTE1 NOTE1 40 x 25 NOTE1 NOTE1 NOTE1 50 x 20 NOTE1 NOTE1 NOTE1 50 x 25 NOTE1 NOTE1 NOTE1 50 x 40 NOTE1 NOTE1 NOTE1 80 x 40 NOTE1 NOTE1 80 x 50 NOTE1 NOTE1 NOTE1

100 x 40 NOTE1 NOTE1 NOTE1 100 x 50 NOTE1 NOTE1 NOTE1 100 x 80 NOTE1 NOTE1 NOTE1 150 x 50 Note1 NOTE1 150 x 80 NOTE1 NOTE1 NOTE1 150 x 100 NOTE1 NOTE1 NOTE1 200 x 50 NOTE1 200 x 80 NOTE1 200 x 100 NOTE1 NOTE1 NOTE1 200 x 150 NOTE1 NOTE1 NOTE1 250 x 50 NOTE1 250 x 80 NOTE1 250 x 100 NOTE1 NOTE1 NOTE1 250 x 150 NOTE1 NOTE1 NOTE1 250 x 200 NOTE1 NOTE1 NOTE1 300 x 50 NOTE1 300 x 80 NOTE1 300 x 100 NOTE1 300 x 150 NOTE1 NOTE1 NOTE1 300 x 200 NOTE1 NOTE1 NOTE1 300 x 250 NOTE1 NOTE1 NOTE1 350 x 50 NOTE1 350 x 80 NOTE1 350 x 100 NOTE1 350 x 150 NOTE1 NOTE1 NOTE1 350 x 200 NOTE1 NOTE1 NOTE1 350 x 250 NOTE1 NOTE1 NOTE1 350 x 300 NOTE1 NOTE1 NOTE1

Run x Br BROB RECB REEB TERB 400 x 50 NOTE1 400 x 80 NOTE1 400 x 100 NOTE1 400 x 150 NOTE1 400 x 200 NOTE1 NOTE1 NOTE1 400 x 250 NOTE1 NOTE1 NOTE1 400 x 300 NOTE1 NOTE1 NOTE1 400 x 350 NOTE1 NOTE1 NOTE1 450 x 50 NOTE1 450 x 80 NOTE1 450 x 100 NOTE1 450 x 150 NOTE1 450 x 200 NOTE1 450 x 250 NOTE1 NOTE1 NOTE1 450 x 300 NOTE1 NOTE1 NOTE1 450 x 350 NOTE1 NOTE1 NOTE1 450 x 400 NOTE1 NOTE1 NOTE1 500 x 50 NOTE1 500 x 80 NOTE1 500 x 100 NOTE1 500 x 150 NOTE1 500 x 200 NOTE1 500 x 250 NOTE1 500 x 300 NOTE1 NOTE1 NOTE1 500 x 350 NOTE1 NOTE1 NOTE1 500 x 400 NOTE1 NOTE1 NOTE1 500 x 450 NOTE1 NOTE1 NOTE1 600 x 50 NOTE1 600 x 80 NOTE1 600 x 100 NOTE1 600 x 150 NOTE1 600 x 200 NOTE1 600 x 250 NOTE1 600 x 300 NOTE1 600 x 350 NOTE1 600 x 400 NOTE1 NOTE1 NOTE1 600 x 450 NOTE1 NOTE1 NOTE1 600 x 500 NOTE1 NOTE1 NOTE1


PIPING CLASS -018220X, Page 4 of 5

Run

x

Br

BROB

RECB

REEB

TERB 700 x 50 NOTE1 700 x 80 NOTE1 700 x 100 NOTE1 700 x 150 NOTE1 700 x 200 NOTE1 700 x 250 NOTE1 700 x 300 NOTE1 700 x 350 NOTE1 700 x 400 NOTE1 700 x 450 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 600 NOTE1 NOTE1 NOTE1 700 x 650 NOTE1 NOTE1 NOTE1



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 60 8138661531 20 4 1/2 x 70 8138661551 25 4 1/2 x 70 8138661551 40 4 1/2 x 80 8138661571 50 4 5/8 x 90 8138662711 80 4 5/8 x 100 8138662731 100 8 5/8 x 100 8138662731 150 8 3/4 x 110 8138663301 200 8 3/4 x 110 8138663301 250 12 7/8 x 120 8138664011 300 12 7/8 x 120 8138664011 350 12 1 x 140 8138664691 400 16 1 x 140 8138664691 450 16 1 1/8 x 150 8138665291 500 20 1 1/8 x 160 8138665301 600 20 1 1/4 x 180 8138665901 650 24 1 1/4 x 230 Note 1 700 28 1 1/4 x 230 Note 1 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 1/2 x 120 8138661641 25 4 1/2 x 130 8138661661 40 4 1/2 x 130 8138661661 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 3/4 x 150 8138663371 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381 350 20 1 1/8 x 220 8138665401 400 20 1 1/4 x 230 8138665981 450 24 1 1/4 x 250 8138666091 500 24 1 1/4 x 260 8138666031 600 24 1 1/2 x 290 8138666801


PIPING CLASS 018220X Page 5 of 5

REDUCING / PIPING COMPONENT

Branch Run pipe BNIF BNIP

15 40 - 40 ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1-------------->

15 50 - 50 15 80 - 200 15 250 - 300 15 350 - 350 15 400 - 400 15 450 - 700 20 50 - 50 20 80 - 100 20 150 - 200 20 250 - 250 20 300 - 300 20 350 - 350 20 400 - 400 20 450 - 700 25 80 - 80 25 100 - 100 25 150 - 200 25 250 - 250 25 300 - 300 25 350 - 350 25 400 - 400 25 450 - 700 40 80 - 80 40 100 - 100 40 150 - 150 40 200 - 200 40 250 - 250 40 300 - 300 40 350 - 350 40 400 - 400 40 50

450 80

- -

700 700


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 031440U Design limits Temperature (°C) 0 50 75 100 125 150 Pressure (Bar ga) DN 25- 300 51.1 50.1 48.3 46.6 45.8 45.1

PIPING CLASS – 031440U , Page 1 of 5

Branch connections 90 degrees

Notes - -

Intended for underground process drain service. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).


when necessary for process/operating requirements - -

The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality Minimum line size for underground buried drain service is DN100.

Table of schedules

DN Schedule 25 160 40 160 50 80 80 80

100 40 150 40 200 40 250 40 300 40


Branch Size Run size

25 40 50 80 100 150 200 250 300

300 C C E E E B B B A 250 C C E E B B B A 200 C C E E B B A 150 C C E B B A 100 C C B B A 80 C C B A 50 B B A 40 B A 25 A

Carbon steel Sour Plant Qusahwira Phase II FEED Class no. 031440U Consignee ASME rating CLASS 300 Engineered by Snc Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 25-300 ASTM A106-B Flanges BLFL Blind flange DN 25-300 ASTM A105N LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 25-300 ASTM A516-60/65/70 WNFL Welding neck flange DN 25-300 ASTM A105N Fittings CAPB Cap bw DN 25-300 ASTM A234-WPB E45B Elbow 45 deg bw DN 25-300 ASTM A234-WPB E90B Elbow 90 deg bw DN 25-300 ASTM A234-WPB TEEB Tee equal bw DN 25-300 ASTM A234-WPB Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-40 ASTM A105N BNIB Branch fitting bw DN 25-40 ASTM A105N BROB Branch outlet bw DN 150-300 ASTM A105N RECB Reducer concentric bw DN 25-300 ASTM A234-WPB REEB Reducer eccentric bw DN 25-300 ASTM A234-WPB TERB Tee reducing bw DN 25-300 ASTM A234-WPB

PIPING CLASS – 031440U , Page 2 of 5 Valves Data Sheet No. BTFF VF.031440Z.22 Ball valve 14313 flgd DN 50-300 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PTFE BTRF VB.031440Z.22 Ball valve 14313 flgd DN 50-300 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PTFE CHDF VC.031440Z.23

Check valve dual plate double flgd DN 200-300 Body: ASTM A216-WCB/WCC Trim: Super Duplex, Stellite 6

CHVF VC.031440Z.21

Check valve (Piston lift type) DN 25-40 Body: ASTM A216-WCB/WCC Trim: Super Duplex, Stellite 6

CHVF VC.031440Z.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GAVF VG.031440Z.21 Gate valve flgd DN 25-300 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GLVF VL.031440Z.21 Globe valve flgd DN 25-200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 VDBT VDB.031440Z.21 Double block and bleed Valve DN 25-50 Body:ASTM A350-LF2 Trim:AISI 316,PTFE Miscellaneous GKSW Gasket spiral wound DN 25-300 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 25-40 Alloy 400/ASTM A350-LF2 end Flanges ORFS Orifice flange set DN 50-300

ASTM A105N For DN 25-80 (600 Lbs)




PIPING CLASS -031440U , Page 3 of 5 PIPING COMPONENTS Nominal pipe size 25 40 50 80 100 150 200 250 300 Item description MESC Pipe Pipe 743003 0401 0601 0711 1091 1491 2111 2451 2871 3311 Flanges Blind flange 766211 1151 1181 1201 1221 1241 1261 1281 1301 1321 Spectacle blind 768837 0461 0481 0501 0521 0541 0561 0581 0601 0621 Welding neck flange 766278 6561 6581 6101 6121 5641 5661 5681 5701 5721 Lap joint flange 766520 5181 Fittings Cap bw 763017 5821 5921 6081 6281 6451 6651 6851 7051 7281 Elbow 45 deg bw 763034 5821 5921 6081 6281 6451 6651 6851 7051 7281 Elbow 90 deg bw 763042 5821 5921 6081 6281 6451 6651 6851 7051 7281 Tee equal bw 763081 5821 5921 6081 6281 6451 6651 6851 7051 7281 Valves Ball valve 14313 flgd 770067 5581 5601 5621 5641 5651 5661 5671 Ball valve 14313 flgd 770067 0581 0601 0621 0641 0651 0661 0671 Check valve dual plate double flgd 776716 0651 0661 0671 Check valve dual plate Lug type NOTE 1 Gate valve flgd 772004 0551 0571 0581 0601 0621 0641 0651 0661 0671 Globe valve flgd 773005 0551 0571 0581 0601 0621 0641 0651 Double block ball valve thrd NOTE 1 Miscellaneous Gasket spiral wound 854136 4081 4121 4141 4181 3701 3741 3761 3781 3801 Meterrun 766496 0661 0681 Orifice flange set 766295 1051 1061 0231 0241 0261 0271 0281 NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION.



40 x 25 7630661911 7630671911 7630880891 50 x 25 7630661991 7630671991 7630881111 50 x 40 7630662081 7630672081 7630881201 80 x 40 7630662291 7630672291 80 x 50 7630662371 7630672371 7630881331

100 x 40 7630662521 7630672491 100 x 50 7630662661 7630672661 7630881571 100 x 80 7629472751 7629622701 7630881691 150 x 50 7679010641 150 x 80 7630662961 7630672961 7630881811 150 x 100 7630663051 7630673051 7630881891 200 x 80 7679010901 200 x 100 7630663251 7630673251 7630882051 200 x 150 7630663351 7630673351 7630882251 250 x 80 7679010921 250 x 100 7630663431 7630673431 7630882531 250 x 150 7630663551 7630673551 7630882711 250 x 200 7630663651 7630673651 7630882911 300 x 80 7679010941 300 x 100 7679008661 300 x 150 7630663831 7630673831 7630883101 300 x 200 7630663961 7630673961 7630883281 300 x 250 7630664041 7630674041 7630883501

Comp.name

Description

BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw

PIPING CLASS -031440U , Page 4 of 5

Branch Run pipe BNIF BNIP 20 80 - 150 7680371241 7680310191 20 200 - 300 7680371271 7680310211 25 80 - 250 7680371281 7680310221 25 300 - 300 7680371291 7680310231 40 80 - 80 7680371321 7680310251 40 100 - 200 7680371331 7680310271 40 250 - 300 7680371341 7680310291


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING

Boltset meter run DN nr inch x mm MESC number 25 4 5/8 x 130 8138662781 40 4 3/4 x 140 8138663351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 3/4 x 150 8138663371 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381 Boltset blind/spacer DN nr inch x mm MESC number 25 4 5/8 x 90 8138662711 40 4 3/4 x 110 8138663301 50 8 5/8 x 100 8138662731 80 8 3/4 x 130 8138663341 100 8 3/4 x 130 8138663341 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381


Boltset standard flange DN nr inch x mm MESC number 25 4 5/8 x 80 8138662691 40 4 3/4 x 100 8138663291 50 8 5/8 x 90 8138662711 80 8 3/4 x 110 8138663301 100 8 3/4 x 120 8138663321 150 12 3/4 x 130 8138663341 200 12 7/8 x 140 8138664041 250 16 1 x 160 8138664721 300 16 1 1/8 x 180 8138665331



Temperature (°C) 0 50 100 120 135 Pressure (Bar ga) DN 15- 600 51.1 50.1 46.6 46.0 45.1 Notes - -

Intended for Drain, process oil, vent gas & nitrogen services. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).


when necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only -


Table of schedules

DN Schedule 15 160 20 160 25 160 40 160 50 80 80 80

100 40 150 40 200 40 250 40 300 40 350 40 400 40 450 40 500 40 600

40


15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600





ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-600 ASTM A106-B Flanges BLFL Blind flange DN 15-600 ASTM A105N LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 15-300 ASTM A516-60/65/70 SPFL Spade DN 350-600 ASTM A516-60/65/70 SPRT Spacer ring DN 350-600 ASTM A516-60/65/70 WNFL Welding neck flange DN 15- 600 ASTM A105N Fittings CAPB Cap bw DN 15-600 ASTM A234-WPB E45B Elbow 45 deg bw DN 15-600 ASTM A234-WPB E90B Elbow 90 deg bw DN 15-600 ASTM A234-WPB TEEB Tee equal bw DN 15-600 ASTM A234-WPB Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-50 ASTM A105N BNIB Branch fitting bw DN 15-40 ASTM A105N BROB Branch outlet bw DN 150-600 ASTM A105N RECB Reducer concentric bw DN 20-600 ASTM A234-WPB REEB Reducer eccentric bw DN 20-600 ASTM A234-WPB TERB Tee reducing bw DN 20-600 ASTM A234-WPB

PIPING CLASS – 031441X , Page 2 of 5 Valves Data Sheet No. BTFF VF.031441X.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PTFE BTFF VF.031441X.22 Ball valve 14313 FB (DN 50, 100)


Trim: Alloy 825, PTFE BTRF VB.031441X.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PTFE BTRF VB.031441X.22 Ball valve 14313 FB (DN 50, 250)


Trim: Alloy 825, PTFE CHDF VC.031441X.23 Check valve dual plate double flgd DN 200-600 Body: ASTM A105/A216-WCB/WCC CHDF VC.031441X.22


DN 50-150

Trim: Alloy 825, Stellite 6 Body:ASTM A105/A216-WCB/WCC Trim:Alloy 825,Stellite

CHVF VC.031441X.21 Check valve (Piston lift type) DN 15-40 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 GAVF VG.031441X.21 Gate valve flgd DN 15-600 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 GLVF VL.031441X.21 Globe valve flgd DN 15-200 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 NDVF VN.031441X.21 Needle valve flgd DN 15-15 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 VDBT VDB.031441X.21 Double block and bleed Valve DN 15-50 Body: ASTM A350-LF2 Trim: Alloy 825, PTFE


flanges ORFS Orifice flange set DN 50-600

ASTM A105 For DN 50-80 (600 Lbs)




PIPIING COMPONENTS

PIPING CLASS-031441X, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 Item description MESC Pipe Pipe 743003 0201 0301 0401 0601 0711 1091 1491 2111 2451 2871 3311 3791 4311 4831 5331 5831 Flanges Blind flange 766211 1081 1121 1161 1181 1201 1221 1241 1261 1281 1301 1321 1341 1361 1381 1401 1421 Spectacle blind 768837 0421 0441 0461 0481 0501 0521 0541 0561 0581 0601 0621 Spacer ring 768846 0641 0661 0681 0701 0721 Spade 768842 0641 0661 0681 0701 0721 Welding neck flange 766278 6521 6541 6561 6581 6101 6121 5641 5661 5681 5701 5721 5741 5761 5781 5801 5841 Lap joint flange 766520 5181 Fittings Cap bw 763017 5721 5781 5821 5921 6081 6281 6451 6651 6851 7051 7281 7471 7681 7901 8101 8301 Elbow 45 deg bw 763034 5721 5781 5821 5921 6081 6281 6451 6651 6851 7051 7281 7471 7681 7901 8101 8301 Elbow 90 deg bw 763042 5721 5781 5821 5921 6081 6281 6451 6651 6851 7051 7281 7471 7681 7901 8101 8301 Tee equal bw 763081 5721 5781 5821 5921 6081 6281 6451 6651 6851 7051 7281 7471 7681 7901 8101 8301 Valves Ball valve 14313 flgd 770091 5581 5601 5621 5641 5651 5661 5671 5681 5691 5701 5711 5731 Ball valve 14313 flgd Ball valve 17292 flgd Ball valve 17292 flgd

770091 0581 0601 0621 0641 0651 0661 0671 0681 0691 0701 0711 0731 770054 8531 8541 8551 8571 770054 3531 3541 3551 3571

Check valve dual plate double flgd 776714 0651 0661 0671 0681 0691 0701 0711 0731 Check valve dual plate Lug type NOTE 1 Check valve flgd Piston lift type NOTE 1 Gate valve flgd 772053 0531 0541 0551 0571 0581 0601 0621 0641 0651 0661 0671 0681 0691 0701 0711 0731 Globe valve flgd 773053 0531 0541 0551 0571 0581 0601 0621 0641 0651 Double block and bleed Valve NOTE 1 Needle Valve flgd NOTE 1 Miscellaneous Gasket spiral wound 854136 4041 4061 4081 4121 4141 4181 3701 3741 3761 3781 3801 3821 3841 3861 3881 3921 Note

1 Note1

Meterrun 766496 0621 0641 0661 0681 Orifice flange set 766295 1051 1061 0231 0241 0261 0271 0281 0291 0301 0321 0331 0341

NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS-031441X, Page 4 of 5REDUCING/PIPING COMPONENTS Run x Br BROB RECB REEB TERB

20 x 15 7630661411 7630671411 7630880391 25 x 15 7630661511 7630671511 7630880491 25 x 20 7630661611 7630671611 7630880591 40 x 15 7630661711 7630671711 40 x 20 7630661811 7630671811 7630880791 40 x 25 7630661911 7630671911 7630880891 50 x 20 7629471971 7630671931 50 x 25 7630661991 7630671991 7630881111 50 x 40 7630662081 7630672081 7630881201 80 x 40 7630662291 7630672291 80 x 50 7630662371 7630672371 7630881331



Run x Br BROB RECB REEB TERB 400 x 50 7679010741 400 x 80 7679010981 400 x 100 7679008701 400 x 150 7679008901 400 x 200 7679009081 7630664531 7630674531 400 x 250 7630664621 7630674621 7630885051 400 x 300 7630664741 7630674741 7630885311 400 x 350 7630664871 7630674871 7630885561 450 x 50 7679010761 450 x 80 7679011001 450 x 100 7679008721 450 x 150 7679008921 450 x 200 7679009101 450 x 250 7630665231 7630675231 7630886041 450 x 300 7630665531 7630675531 7630886281 450 x 350 7630665841 7630675841 7630886521 450 x 400 7630666141 7630676141 500 x 50 7679010781 500 x 80 7679011021 500 x 100 7679008741 500 x 150 7679008961 500 x 200 7679009121 500 x 250 7679009281 500 x 300 7630666431 7630676431 7630887481 500 x 350 7630666741 7630676741 7630887721 500 x 400 7630667041 7630677041 7630887961 500 x 450 7630667341 7630677341 7630888201 600 x 50 7679010821 600 x 80 7679011061 600 x 100 7679008781 600 x 150 7679008981 600 x 200 7679009161 600 x 250 7679009321 600 x 300 7630888681 600 x 350 7630888921 600 x 400 7630668841 7630678841 7630889161 600 x 450 7630669141 7630679141 7630889401 600 x 500 7630669441 7630679441 7630889641 650 x 50 Note 1 650 x 80 Note 1 650 x 100 Note 1 650 x 150 Note 1 650 x 200 Note 1 650 x 250 Note 1 650 x 300 Note 1 650 x 350 Note 1 650 x 400 Note 1 Note 1 Note 1 650 x 450 Note 1 Note 1 Note 1 650 x 500 Note 1 Note 1 Note 1 650 x 600 Note 1 Note 1 Note 1

Run

x

Br

BROB

RECB

REEB

TERB


700 x 50 NOTE1 700 x 80 NOTE1 700 x 100 NOTE1 700 x 150 NOTE1 700 x 200 NOTE1 700 x 250 NOTE1 700 x 300 NOTE1 700 x 350 NOTE1 700 x 400 NOTE1 700 x 450 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 500 NOTE1 NOTE1 NOTE1 700 x 600 NOTE1 NOTE1 NOTE1 700 x 650 NOTE1 NOTE1 NOTE1

Branch Run pipe BNIF BNIP 15 40 - 700 7680371211 7680310161 20 50 - 50 7680371221 7680310171 20 80 - 150 7680371241 7680310191 20 200 - 700 7680371271 7680310211 25 80 - 250 7680371281 7680310221 25 300 - 700 7680371291 7680310231 40 80 - 80 7680371321 7680310251 40 100 - 200 7680371331 7680310271 40 250 - 500 7680371341 7680310291 40 600 - 700 7680371351 7680310301 50 80 - 700 Note 1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 70 8138661551 20 4 5/8 x 80 8138662691 25 4 5/8 x 80 8138662691 40 4 3/4 x 100 8138663291 50 8 5/8 x 90 8138662711 80 8 3/4 x 110 8138663301 100 8 3/4 x 120 8138663321 150 12 3/4 x 130 8138663341 200 12 7/8 x 140 8138664041 250 16 1 x 160 8138664721 300 16 1 1/8 x 180 8138665331 350 20 1 1/8 x 180 8138665331 400 20 1 1/4 x 190 8138665921 450 24 1 1/4 x 200 8138665881 500 24 1 1/4 x 210 8138665951 600 24 1 1/2 x 240 8138666871 650 NOTE1 700 NOTE1 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 5/8 x 130 8138662781 25 4 5/8 x 130 8138662781 40 4 3/4 x 140 8138663351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 3/4 x 150 8138663371 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381 350 20 1 1/8 x 220 8138665401 400 20 1 1/4 x 230 8138665981 450 24 1 1/4 x 250 8138666091 500 24 1 1/4 x 260 8138666031 600 24 1 1/2 x 290 8138666801


Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 80 8138661571 20 4 5/8 x 90 8138662711 25 4 5/8 x 90 8138662711 40 4 3/4 x 110 8138663301 50 8 5/8 x 100 8138662731 80 8 3/4 x 130 8138663341 100 8 3/4 x 130 8138663341 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381 350 20 1 1/8 x 220 8138665401 400 20 1 1/4 x 240 8138666001 450 24 1 1/4 x 250 8138666091 500 24 1 1/4 x 260 8138666031 600 24 1 1/2 x 300 8138666961 650 NOTE1 700 NOTE1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 031503Z Design limits

Temperature (°C) -45 0 50 75 100 125 150 180 Pressure (Bar ga) DN 15-200

51.1 51.1 50.1 48.3 46.6 45.8 45.1 44.3

Notes - -

Intended for vent gas & Process oil service. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).




Table of schedules

DN Schedule 15 160 20 160 25 160 40 160 50 80 80 80

100 40 150 40 200 40 250 40

PIPING CLASS – 031503Z , , Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250

250 C C C C E E B B B A 200 C C C C E E B B A 150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15- 200 ASTM A333-6 Flanges BLFL Blind flange DN 15-200 ASTM A350-LF2 LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 15-200 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-200 ASTM A350-LF2 Fittings CAPB Cap bw DN 15-200 ASTM A420-WPL6 E45B Elbow 45 deg bw DN 15-200 ASTM A420-WPL6 E90B Elbow 90 deg bw DN 15-200 ASTM A420-WPL6 TEEB Tee equal bw DN 15-200 ASTM A420-WPL6 Reducing fittings (Refer Branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25 - 40 ASTM A350-LF2 BNIB Branch fitting bw DN 15-40 ASTM A350-LF2 BROB Branch outlet bw DN 150-200 ASTM A350-LF2 RECB Reducer concentric bw DN 20-200 ASTM A420-WPL6 REEB Reducer eccentric bw DN 20-200 ASTM A420-WPL6 TERB Tee reducing bw DN 20-200 ASTM A420-WPL6

PIPING CLASS – 031503Z , Page 2 of 5

Valves Data sheet No. BTFF VF.031503Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, PTFE BTFF VF.031503Z.22 Ball valve 14313 FB (DN 50, 80,

200) flgd DN 50-200 Body: ASTM A350-LF2/A352-LCC

Trim: Alloy 825, PTFE BTRF VB.031503Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, PTFE BTRF VB.031503Z.22 Ball valve 14313 FB (DN 150) flgd DN 50-200 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, PTFE CHDF VC.031503Z.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A352-LCC Trim: Alloy 825, Stellite 6 CHDF VC.031502Z.23 Check valve dual plate double flgd DN 200-200 Body: ASTM A352-LCC Trim: Alloy 825, Stellite 6 CHVF VC.031503Z.21 Check valve flgd(Piston lift type) DN 15-40 Body: ASTM A350-LF2/A352-LCC Trim: AlIoy 825, Stellite 6 GAVF VG.031503Z.21 Gate valve flgd DN 15-200 Body: ASTM A350-LF2/A352-LCC Trim: AlIoy 825, Stellite 6 GLVF VL.031503Z.21 Globe valve flgd DN 15-200 Body: ASTM A350-LF2/A352-LCC Trim: AlIoy 825, Stellite 6 VDBT VDB.031503Z.21 Double block and bleed Valve DN 15 -50 Body: ASTM A350-LF2 Trim: Alloy 825, PTFE


flanges ORFS Orifice flange set DN 50- 200 ASTM A350-LF2

For DN 50-80 (600 lbs) For DN 100 & Above (300 lbs)

ST3B Strainer Y-type (3 mm ca) DN 50-200 Sieve: UNS N08825 STBT Studbolt with nuts --- ASTM A320-L7M/A194-7M


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS-031503Z, , Page 3 of 5 15 20 25 40 50 80 100 150 200 Item description MESC Pipe 743016 0231 0301 0381 0541 0611 0691 0751 0841 0951 Flanges Blind flange 766212 5081 5121 5161 5181 5201 5221 5241 5261 5281 Lap joint flange 766520 5181 Spectacle blind 768835 2581 2621 2661 2681 2701 2721 2741 2761 2781 Welding neck flange 766282 8521 8541 8561 8581 8121 8141 7641 7661 7681 Fittings Cap bw 763117 1721 1781 1821 1921 2101 2301 2461 2661 2841 Elbow 45 deg bw 763134 1721 1781 1821 1921 2101 2301 2461 2661 2841 Elbow 90 deg bw 763143 1721 1781 1821 1921 2101 2301 2461 2661 2841 Tee equal bw 763180 1721 1781 1821 1921 2101 2301 2461 2661 2841 Valves Ball valve 14313 flgd 770094 5581 5601 5621 5641 5651

Ball valve 14313 flgd Ball valve 17292 flgd Ball valve 17292 flgd

770094 0581 0601 0621 0641 0651 770056 8531 8541 8551 8571 770056 3531 3541 3551 3571

Check valve dual plate Lug type 776719 0651

Check valve flgd Piston lift type NOTE 1

Gate valve flgd 772054 0531 0541 0551 0571 6581 6601 6621 6641 6651

Globe valve flgd 773054 3531 3541 3551 3571 6581 6601 6621 6641 6651

Double block and bleed Valve NOTE 1

Miscellaneous Gasket spiral wound 854136 4041 4061 4081 4121 4141 4181 3701 3741 3761 Meterrun 766496 0621 0641 0661 0681 Orifice flange set 766297 1121 1131 0241 0261 0271 Strainer Y-type (3 mm ca) Note1 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION



REDUCING/PIPING COMPONENTS Run x Br BROB RECB REEB TERB

20 x 15 7631661411 7631751411 7631880391 25 x 15 7631661511 7631751511 7631880491 25 x 20 7631661611 7631751611 7631880591 40 x 15 7631661711 7631751711 40 x 20 7631661811 7631751811 7631880791 40 x 25 7631661911 7631751911 7631880891 50 x 20 7631661931 7631751931 50 x 25 7631661991 7631751991 7631881111 50 x 40 7631662081 7631752081 7631881201 80 x 40 7631662291 7631752291 80 x 50 7631662371 7631752371 7631881331

100 x 40 7631662491 7631752491 100 x 50 7631662661 7631752661 7631881581 100 x 80 7631662761 7631752761 7631881701 150 x 50 7679050641 150 x 80 7629452941 7629602881 7631881811 150 x 100 7631663051 7631753051 7631881891 200 x 50 7679050661 200 x 80 7679050901 200 x 100 7631663251 7631753251 7631882051 200 x 150 7631663351 7631753351 7631882251


PIPING CLASS-031503Z, , Page 4 of 5

Branch Run pipe BNIF BNIP 15 40 - 150 7680376211 7680311161 20 50 - 50 7680376221 7680311121 20 80 - 150 7680376241 7680311001 25 80 - 150 7680376281 7680310971 40 80 - 80 7680376321 7680310931 40 100 - 200 7680376331 7680310911


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 70 8138671551 20 4 5/8 x 80 8138672691 25 4 5/8 x 80 8138672691 40 4 3/4 x 100 8138673291 50 8 5/8 x 90 8138672711 80 8 3/4 x 110 8138673301 100 8 3/4 x 120 8138673321 150 12 3/4 x 130 8138673341 200 12 7/8 x 140 8138674041 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138671641 20 4 5/8 x 130 8138672781 25 4 5/8 x 130 8138672781 40 4 3/4 x 140 8138673351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 3/4 x 150 8138673371 150 12 3/4 x 150 8138673371 200 12 7/8 x 170 8138674091

PIPING CLASS-031503Z, , Page 5 of 5



CLASS 033421X Design limits Temperature (°C) -100 0 50 100 150 200 205 Pressure (Bar ga) DN 15-150

49.6 49.6 48.1 42.2 38.5 35.7 35.5

Notes - -

Intended for vent gas service. Design limits acc. to ASME B16.5 flange rating mat. grp 2.2(ASME B16.5 up to DN 600 and B16.47 for larger sizes).

- For bending of pipe see DEP 31.38.01.31-Gen. - For basis of design see DEP 31.38.01.10-Gen. - External protection as per ADCO Doc 30.78.12.0668 is required for design temperatures > 50

degr. C in saliferous atmospheres to prevent chloride stress corrosion cracking(Ref TB 28,PI-3) - When chlorides are present in the process fluid in conjunction with free oxygen, the max.

temperature is limited to 50 deg C, to prevent chloride stress corrosion cracking - The use of red. bore ball valves is considered most economical. Use full bore ball valves only



Table of schedules


100 10S 150 40S 200 40S


15 20 25 40 50 80 100 150 200



Stainl steel AISI 316L Sour Plant Qusahwira Phase II FEED Class no. 033421X Consignee ASME rating CLASS 300 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395



COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-150 ASTM A312-TP316L Flanges BLFL Blind flange DN 15-150 ASTM A182-F316 LJFL Lap joint flange DN 40-40 ASTM A182-F316 SBFL Spectacle blind DN 15-150 ASTM A240-TP316 WNFL Welding neck flange DN 15-150 ASTM A182-F316 Fittings CAPB Cap bw DN 15-150 ASTM A403-WP316L E45B Elbow 45 deg bw DN 15-150 ASTM A403-WP316L E90B Elbow 90 deg bw DN 15-150 ASTM A403-WP316L TEEB Tee equal bw DN 15-150 ASTM A403-WP316L Reducing fittings (Refer Branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A182-F316 BNLF Branch fitt light-weight flgd DN 40-40 ASTM A182-F316 BROB Branch outlet bw DN 150-150 ASTM A182-F316 RECB Reducer concentric bw DN 20-150 ASTM A403-WP316L REEB Reducer eccentric bw DN 20-150 ASTM A403-WP316L TERB Tee reducing bw DN 20-150 ASTM A403-WP316L

PIPING CLASS – 033421X , Page 2 of 5 Valves Data Sheet No. BAFF VF.033421X.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182-F316/A351-CF8M BAFF VF.033421X.22


DN 50-150

Trim: Monel K500, PTFE Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, PTFE

BARF VB.033421X.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182-F316/A351-CF8M BARF VB.033421X.22

Ball valve 14313 FB (DN 150) flgd

DN 50-150

Trim: Monel K500, PTFE Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, PTFE

CHDFVC.033421X.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A351-CF8M/ASTM A182-F316

Trim: Monel K500, Stellite 6 CHVFVC.033421X.21 Check valve flgd(Piston lift type) DN 15-40 Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, Stellite 6 GAVFVG.033421X.21 Gate valve flgd DN 15-150 Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, Stellite 6 GLVF VL.033421X.21 Globe valve flgd DN 15-150 Body: ASTM A182-F316/A351-CF8M Trim: Monel K500, Stellite 6 VDBTVDB.033421X.21 Double block and bleed Valve DN 15-50 Body: ASTM A182-F316 Trim: Monel K500, PTFE Miscellaneous GKSW Gasket spiral wound DN 15-150 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/AISI 316 end flanges ORFS Orifice flange set DN 50-150 ASTM A182-F316

For DN 50-80 (600lbs) For DN 100-150 (300lbs)

STBT Studbolt with nuts --- ASTM A320 L7M/A194-2HM


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS-033421X, , Page 3 of 5

Nominal Pipe Size 15 20 25 40 50 80 100 150 Item description MESC Pipe Pipe 743633 0181 0261 0331 0491 0571 0651 0731 0831 Flanges Blind flange 766510 4121 4141 4161 4181 4201 4221 4241 4261 Spectacle blind 768810 2081 2121 2161 2181 2201 2221 2241 2261 Welding neck flange 766579 4061 4081 4101 4121 4141 Welding neck flange 766580 4021 4041 4161 Lap joint flange 766520 5181 Fittings Cap bw 763319 2861 2961 3041 3241 3341 3541 3741 3961 Elbow 45 deg bw 763337 2861 2961 3041 3241 3341 3541 3741 3961 Elbow 90 deg bw 763341 2861 2961 3041 3241 3341 3541 3741 3961 Tee equal bw 763384 7861 7961 8041 8241 8341 8541 8741 8961 Valves Ball valve 17292 flgd 770326 8531 8541 8551 8571

Ball valve 14313 flgd 770374 5581 5601 5621 5641 Ball valve 17292 flgd 770326 3531 3541 3551 3571 Ball valve 14313 flgd 770374 0581 0601 0621 0641 Check valve dual plate Lug type NOTE 1 Check valve flgd Piston lift type NOTE 1 Gate valve flgd 772303 0531 0541 0551 0571 3581 3601 3621 3641 Globe valve flgd 773303 0531 0541 0551 0571 0581 0601 0621 0641 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 4041 4061 4081 4121 4141 4181 3701 3741 Meterrun 766496 0121 0141 0161 0181 Orifice flange set 766592 4911 4931 4011 4371 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION



20 x 15 7633705661 7633725661 7633856181 25 x 15 7633705791 7633725791 7633856321 25 x 20 7633705891 7633725891 7633856371 40 x 15 7633705991 7633725991 40 x 20 7633706191 7633726191 7633856491 40 x 25 7633706241 7633726241 7633856561 50 x 20 7636500901 7636630901 50 x 25 7633706341 7633726341 7633856721 50 x 40 7633706441 7633726441 7633856831 80 x 40 7633706741 7633726741 80 x 50 7633706841 7633726841 7633893521

100 x 40 7633706931 7633726931 100 x 50 7633707041 7633727041 7633893681 100 x 80 7633707141 7633727141 7633893761 150 x 50 7679685441 150 x 80 7633707491 7633727491 7633893851 150 x 100 7633707591 7633727591 7633893931


PIPING CLASS-033421X, , Page 4 of 5

Branch Run pipe BNIP BNLF 15 40 - 40 7680315821 7680550791 15 50 - 50 7680315831 7680550801 15 80 - 150 7680315841 7680550811 20 50 - 50 7680315861 7680550841 20 80 - 100 7680315871 7680550851 20 150 - 150 7680315881 7680550861 25 80 - 80 7680315911 7680550891 25 100 - 100 7680315921 7680550901 25 150 - 150 7680315931 7680550911 40 80 - 80 7680315961 7680550941 40 100 - 100 7680315971 7680550951 40 150 - 150 7680315981 7680550961


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING

Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 70 Note1 20 4 5/8 x 80 Note1 25 4 5/8 x 80 Note1 40 4 3/4 x 100 Note1 50 8 5/8 x 90 Note1 80 8 3/4 x 110 Note1 100 8 3/4 x 120 Note1 150 12 3/4 x 130 Note1 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 Note1 20 4 5/8 x 130 Note1 25 4 5/8 x 130 Note1 40 4 3/4 x 140 Note1 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 Note1 80 8 3/4 x 140 Note1 100 8 3/4 x 150 Note1 150 12 3/4 x 150 Note1

‘

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 80 Note1 20 4 5/8 x 90 Note1 25 4 5/8 x 90 Note1 40 4 3/4 x 110 Note1 50 8 5/8 x 100 Note1 80 8 3/4 x 130 Note1 100 8 3/4 x 130 Note1 150 12 3/4 x 150 Note1




CLASS 036620X Design limits

Temperature (°C) - 45 4 50 75 100 DN 15- 150 51.7 51.7 51.7 51.6 51.5 DN 200- 600 51.1 51.1 50.1 48.3 46.6 Notes - -

Intended for produced water service. DN 15-150: Design limits acc. to ASME B16.5 flange rating mat. grp 3.8

- DN 200-600: Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).

- For basis of design see DEP 31.38.01.10-Gen. - Piping class contains a combination of solid incoloy and carbon steel with incoloy clad material - The use of red. bore ball valves is considered most economical. Use full bore ball valves only



Table of schedules SOLID INCOLOY CLADDED (BASE MAT LTCS)

DN Schedule 200 60 (Note1) 250 60 (Note1) 300 STD (Note1) 350 30

400 30

NOTE 1- LTCS pipe thickness is increased to min 9.53 mm to suit cladding of UNS N08825 ,based on cladding vendor requirement NOTE 2- Solid incoloy thickness for DN 200 to 400 are applicable only for solid incoloy reducing fittings

DN Schedule 15 40S

20 40S 25 10S 40 10S 50 10S 80 10S

100 10S 150 10S 200 20 (Note-2) 250 20 (Note-2) 300 20 (Note-2) 350 20(Note-2) 400 20(Note-2)

Incoloy Alloy 825 LT Sour Plant Qusahwira Phase II FEED Class no. 036620X Consignee ASME rating CLASS 300 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS – 036620X , Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350 400

400 - - C C E E E E E B B B A 350 - - C C E E E E B B B A 300 - - C C E E E B B B A 250 - - C C E E B B B A 200 C C C C E E B B A 150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A

Code Explanation of characters - Not applicable A Equal tee B Reducing tee C Branch fitting E Branch outlet


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.)

Pipe PIPE Pipe DN 15-150 ASTM B423 UNS N08825 (Incoloy 825) PIPE Transition

Pipe Pipe

DN 200- 600 DN 200-400

ASTM A333-6 + Clad UNS N08825 ASTM B423 UNS N08825 FOR PUP Piece only (Note-3)

Flanges BLFL Blind flange DN 15-150 ASTM B564 UNS N08825 BLFL Blind flange DN 200- 600 ASTM A350-LF2 + Clad UNS

N08825 LJFL Lap joint flange DN 50-50 ASTM B564 UNS N08825 SBFL Spectacle blind DN 15- 300 ASTM B424 UNS N08825 SPFL Spade DN 350-600 ASTM B424 UNS N08825 SPRT Spacer ring DN 350-600 ASTM B424 UNS N08825 WNFL Welding neck flange DN 15-150 ASTM B564 UNS N08825 WNFL Welding neck flange DN 200- 600 ASTM A350-LF2 + Clad UNS

N08825 Fittings CAPB Cap bw DN 15-150 ASTM B366-WPNICMC CAPB Cap bw DN 200- 600 ASTM A420-WPL6 + Clad UNS N08825 E45B Elbow 45 deg bw DN 15-150 ASTM B366-WPNICMC E45B Elbow 45 deg bw DN 200- 600 ASTM A420-WPL6 + Clad UNS N08825 E90B Elbow 90 deg bw DN 15-150 ASTM B366-WPNICMC E90B Elbow 90 deg bw DN 200- 600 ASTM A420-WPL6 + Clad UNS N08825 TEEB Tee equal bw DN 15-150 ASTM B366-WPNICMC TEEB Tee equal bw DN 200- 600 ASTM A420-WPL6 + Clad UNS N08825 Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM B564 UNS N08825 BNLF Branch fitt flgd DN 25-50 ASTM B564 UNS N08825 BROB Branch outlet bw DN 150- 600 ASTM B564 UNS N08825 BROB Branch outlet bw DN 400-600 ASTM A350-LF2 + Clad UNS N08825 RECB Reducer concentric bw DN 20- 350 ASTM B366-WPNICMC RECB Reducer concentric bw DN 250 - 600 ASTM A420-WPL6 + Clad UNS N08825 REEB Reducer eccentric bw DN 20- 350 ASTM B366-WPNICMC REEB Reducer eccentric bw DN 250 -600 ASTM A420-WPL6 + Clad UNS N08825 TERB Tee reducing bw DN 20-300 ASTM B366-WPNICMC TERB Tee reducing bw DN 250- 600 ASTM A420-WPL6 + Clad UNS N08825 NOTE 3- Transition pipe shall be used as a transition piece between solid incoloy 825 reducing fittings (larger size 200-400) and cladded pipes (DN 200-600). Ends of this transition piece shall be prepared in fabrication shop to suit solid incoloy pipe thickness on one end & cladded pipe thickness (including clad thickness ) on other end. Pup piece thickness for size 200 to 400 shall be 15mm.

PIPING CLASS – 036620X , Page 2 of 5 Valves Data Sheet No. BTFF VF.036620X.21 Ball valve 17292 flgd DN 15-40 Body: ASTM B564 UNS N08825 Trim: Alloy 825, PTFE BTRF VF.036620X.23 Ball valve 14313 flgd DN 200-600 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825

Trim: Alloy 825, PTFE BTFF VF.036620X.22 Ball valve 14313 flgd DN 50-150 Body: ASTM B564 UNS N08825/A494-CU5MCUC Trim: Alloy 825, PTFE BTRF VB.036620X.23 Ball valve 14313 flgd DN 200- 600 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825 Trim: Alloy 825, PTFE BTRF VB.036620X.21 Ball valve 17292 flgd DN 15-40 Body: ASTM B564 UNS N08825 Trim: Alloy 825, PTFE BTRF VB.036620X.22 Ball valve 14313 flgd DN 50-150 Body: ASTM B564 UNS N08825/A494-CU5MCUC Trim: Alloy 825, PTFE CHDF VC.036620X.23 Check valve dual plate

double flgd DN 200-600 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825

Trim: Alloy 825, Stellite 6 CHVF VC.036620X.21 Check valve (Piston lift type)

DN 15- 40 Body: ASTM B564 UNS N08825/A494-CU5MCUC

Trim: Alloy 825, Stellite 6 CHDF VC.036620X.22 Check valve dual plate Lug

type DN 100-150 Body: ASTM B564 UNS N08825/A494-CU5MCUC

Trim: Alloy 825, Stellite 6 GABF VG.036620X.21 Gate valve bellows seal flgd DN 15-40 Body: ASTM B564 UNS N08825/A494-CU5MCUC Trim: Alloy 825, Stellite 6 GAVF VG.036620X.23 Gate valve flgd DN 200- 600 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825 Trim: Alloy 825, Stellite 6 GAVF VG.036620X.22 Gate valve flgd DN 50-150 Body: ASTM B564 UNS N08825/A494-CU5MCUC Trim: Alloy 825, Stellite 6 GLBF VL.036620X.21 Globe valve bellows seal flgd DN 15-40 Body: ASTM B564 UNS N08825/A494-CU5MCUC Trim: Alloy 825, Stellite 6 GLVF VL.036620X.23 Globe valve flgd DN 200-200 Body: ASTM A350-LF2/A352-LCC + Clad UNS N08825 Trim: Alloy 825, Stellite 6 GLVF VL.036620X.22 Globe valve flgd DN 50-150 Body: ASTM B564 UNS N08825/A494-CU5MCUC Trim: Alloy 825, Stellite 6 VDBT VDB.036620X.21 Double block and bleed Valve

DN 15-50 Body: ASTM B564 UNS N08825

Trim: Alloy 825, PTFE Miscellaneous GKSW Gasket spiral wound DN 15- 600 Monel 500, graphite filled CS centring ring/Monel 500 inner ring MTRR Meterrun DN 15-40 Monel 500 ORFS Orifice flange set DN 50-600 ASTM B564 UNS N08825

For DN 50-80 (600 Lbs) STBT Studbolt with nuts ---- ASTM A320-L7M/A194-7M STYB Strainer Y-type DN 50-400 Sieve: UNS N08825


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS-036620X, Page 3 of 5

Pipe Pipe 747861 0181 0261 0331 0491 0571 0651 0751 0841 Pipe 749100 1041 1281 Note1 1841 2161 2491 2791 3101 Flange Blind flange 766000 0191 0201 0211 0221 0231 0241 0251 0261 Blind flange 769127 0271 0281 0291 Lap joint flange Note1 Spectacle blind 768825 0201 0211 0221 0231 0241 0251 0261 0271 0281 0291 0301 Spacer ring 768820 8311 8321 8331 8341 8351 Spade 768899 0311 0321 0331 0341 0351 Welding neck flange 766078 2091 2101 1901 1921 1931 1951 1971 1991 Welding neck flange 769140 1881 1891 Note1 2101 2111 2121 2131 2151 Fitting Cap bw 762817 0361 0461 0541 0741 0841 1041 1241 1441 Cap bw 769112 1041 1281 Note1 1841 2161 2491 2791 3101 Elbow 45 deg bw 762837 0361 0461 0541 0741 0841 1041 1241 1441 Elbow 45 deg bw 769117 1041 1281 Note1 1841 2161 2491 2791 3101 Elbow 90 deg bw 762842 0361 0461 0541 0741 0841 1041 1241 1441 Elbow 90 deg bw 769122 1041 1281 Note1 1841 2161 2491 2791 3101 Tee equal bw 762887 0361 0461 0541 0741 0841 1041 1241 1441 Tee equal bw 769183 1041 1281 Note1 1841 2161 2491 2791 3101 Valves Ball valve 17292 flgd 770655 8531 8541 8551 8571

Ball valve 14313 flgd 770660 8581 8601 8621 8641 Ball valve 17292 flgd 770655 3531 3541 3551 3571

Ball valve 14313 flgd 770092 8651 8661 8671 8681 8691 8701 8711 8731 Ball valve 14313 flgd 770660 3581 3601 3621 3641 Ball valve 14313 flgd 770092 3651 3661 3671 3681 3691 3701 3711 3731 Check valve dual plate double flgd 776724 0651 0661 0671 0681 0691 0701 0711 0731 Check valve dual plate Lug type NOTE 1

Check valve flgd Piston lift type NOTE 1 Gate valve bellows seal flgd NOTE 1

Gate valve flgd 772641 3581 3601 3621 3641 Gate valve flgd 772056 6651 6661 6671 6681 6691 6701 6711 6731

Globe valve bellows seal flgd NOTE 1 Globe valve flgd 773641 3581 3601 3621 3641

Globe valve flgd 773055 9651 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854360 4041 4061 4081 4121 4141 4181 3701 3741 3761 3781 3801 3821 3841 3861 3881 3921 Meterrun 766496 1621 1641 1661 1681 Orifice flange set 766096 1011 1021 0011 0021 0111 0121 0131 0231 0241 0251 0261 0271 Strainer Y-type NOTE1

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 Item description MESC

Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION.




20 x 15 7628670661 7628750661 7628926181 25 x 15 7628670791 7628750791 7628926321 25 x 20 7628670891 7628750891 7628926371 40 x 15 7628670991 7628750991 40 x 20 7628671191 7628751191 7628926471 40 x 25 7628671241 7628751241 7628926721 50 x 20 7628671311 7628751311 50 x 25 7628671341 7628751341 7628926771 50 x 40 7628671441 7628751441 7628926831 80 x 40 7628671741 7628751741 80 x 50 7628671841 7628751841 7628926891

100 x 40 7628671941 7628751941 100 x 50 7628672041 7628752041 7628926921 100 x 80 7628672141 7628752141 7628926961 150 x 50 7677350071 150 x 80 7628672441 7628752441 7628926981 150 x 100 7628672541 7628752541 7628927021 200 x 50 7677350781 200 x 80 7677350881 200 x 100 7628672591 7628752591 7628927051 200 x 150 7628670021 7628750021 7628927111 250 x 50 7677350791 250 x 80 7677350891 250 x 100 7628672621 7628752621 7628927081 250 x 150 7628670031 7628750031 7628927121 250 x 200 7691514261 7691624261 7691884261 300 x 50 Note1 300 x 80 Note1 300 x 100 Note1 300 x 150 762867041 762867041 Note1 300 x 200 Note1 Note1 Note1 300 x 250 Note1 Note1 Note1 350 x 50 7677351511 350 x 80 7677351611 350 x 100 7677351701 350 x 150 7677351781 762867061 7628670061 350 x 200 Note1 Note1 Note1 350 x 250 Note1 Note1 Note1 350 x 300 Note1 Note1 Note1



400 x 50 7677351521 400 x 80 7677351621 400 x 100 7677351711 400 x 150 7677351791 400 x 200 7691001161 7691516191 7691626191 400 x 250 7691516401 7691626401 7691886401 400 x 300 7691516491 7691626491 7691886491 400 x 350 7691516701 7691626701 7691886701 450 x 50 7677351531 450 x 80 7677351631 450 x 100 7677351721 450 x 150 7677351801 450 x 200 7691001171 450 x 250 7691517091 7691627091 7691887091 450 x 300 7691517171 7691627171 7691887171 450 x 350 7691517381 7691627381 7691887381 450 x 400 7691517591 7691627591 7691887591 500 x 50 7677351541 500 x 80 7677351641 500 x 100 7677351731 500 x 150 7677351811 500 x 200 7691001181 500 x 250 7691001241 500 x 300 7691518061 7691628061 7691888061 500 x 350 7691518271 7691628271 7691888271 500 x 400 7691518481 7691628481 7691888481 500 x 450 7691518691 7691628691 7691888691 600 x 50 7677351551 600 x 80 7677351651 600 x 100 7677351741 600 x 150 7677351821 600 x 200 7691001191 600 x 250 7691001251 600 x 300 7691888941 600 x 350 7691889161 600 x 400 7691519371 7691629371 7691889371 600 x 450 7691519581 7691629581 7691889581 600 x 500 7691519581 7691629581 7691889581


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS-036620X,Page 4 of 5

Branch Run pipe BNIP BNLF 15 40 - 40 Note1 Note1 15 50 - 50 Note1 Note1 15 80 - 150 Note1 Note1 20 50 - 50 Note1 Note1 20 80 - 150 Note1 Note1 25 80 - 80 Note1 Note1 25 100 - 100 Note1 Note1 25 150 - 250 Note1 Note1 25 300 - 600 Note1 Note1 40 80 - 80 Note1 Note1 40 100 - 100 Note1 Note1 40 150 - 150 Note1 Note1 40 200 - 300 Note1 Note1 40 350 - 600 Note1 Note1 50 80 - 600 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 70 8138671551 20 4 5/8 x 80 8138672691 25 4 5/8 x 80 8138672691 40 4 3/4 x 100 8138673291 50 8 5/8 x 90 8138672711 80 8 3/4 x 110 8138673301 100 8 3/4 x 120 8138673321 150 12 3/4 x 130 8138673341 200 12 7/8 x 140 8138674041 250 16 1 x 160 8138674721 300 16 1 1/8 x 180 8138675331 350 20 1 1/8 x 180 8138675331 400 20 1 1/4 x 190 8138675921 450 24 1 1/4 x 200 8138675881 500 24 1 1/4 x 210 8138675951 600 24 1 1/2 x 240 8138676871 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138671641 20 4 5/8 x 130 8138672781 25 4 5/8 x 130 8138672781 40 4 3/4 x 140 8138673351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 3/4 x 150 8138673371 150 12 3/4 x 150 8138673371 200 12 7/8 x 170 8138674091 250 16 1 x 190 8138674771 300 16 1 1/8 x 210 8138675381 350 20 1 1/8 x 220 8138675401 400 20 1 1/4 x 230 8138675981 450 24 1 1/4 x 250 8138676061 500 24 1 1/4 x 260 8138676031 600 24 1 1/2 x 290 8138676901

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 80 8138671571 20 4 5/8 x 90 8138672711 25 4 5/8 x 90 8138672711 40 4 3/4 x 110 8138673301 50 8 5/8 x 100 8138672731 80 8 3/4 x 130 8138673341 100 8 3/4 x 130 8138673341 150 12 3/4 x 150 8138673371 200 12 7/8 x 170 8138674091 250 16 1 x 190 8138674771 300 16 1 1/8 x 210 8138675381 350 20 1 1/8 x 220 8138675401 400 20 1 1/4 x 240 8138676001 450 24 1 1/4 x 250 8138676061 500 24 1 1/4 x 260 8138676031 600 24 1 1/2 x 300 8138676961




CLASS 038220X Design limits Temperature (°C) -29 0 50 100 125 150 180 Pressure (Bar ga) DN 15-600

51.7 51.7 51.7 50.7 48.3 45.9 44.0

Notes - -

Intended for process drain, Drain, hydrocarbon condensate, process gas, process oil, produced water,Fuel gas & vent gas services. Design limits acc. to ASME B16.5 flange rating mat. grp 2.8 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).


when necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - - - - - -

The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality Pipe & fittings (DN 350 & above) to be welded with 100% X-ray ASTM A995 Gr.5A to be used for casting of SDSS valves aspressure containing part.. For seamless/welded wrought fittings ,refer TB-10 PI-9 As per TB-10 PI-8 ASTM A928 CL.1 can be used as a substitue for ASTM A790 UNS S32750( WELDED)

Table of schedules


100 10S 150 40S 200 40S 250 40S 300 40S 350 30 400 30 450 30 500 30 600 30


15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600






COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-300 ASTM A790-UNS S32750 PIPE Pipe DN 350-600 ASTM A790-UNS S32750 welded

w/ 100% x-ray Flanges BLFL Blind flange DN 15-600 ASTM A182 Grade F53 LJFL Lap joint flange DN 40-40 ASTM A182 Grade F53 SBFL Spectacle blind DN 15-300 ASTM A182 Grade F53 SPFL Spade DN 350-600 ASTM A182 Grade F53 SPRT Spacer ring DN 350-600 ASTM A182 Grade F53 WNFL Welding neck flange DN 15-600 ASTM A182 Grade F53 Fittings CAPB Cap bw DN 15-600 ASTM A815 Grade WPS32750 E45B E45B


DN 15-300 DN 350-600

ASTM A815 Grade WPS32750 ASTM A815 Grade WP-WX32750(100% RT)

E90B E90B


DN 15-300 DN 350-600


TEEB TEEB


DN 15-300 DN 350-600


Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A182 Grade F53 BROB Branch outlet bw DN 150-600 ASTM A182 Grade F53 RECB RECB


DN 20-300 DN 350-600


REEB REEB


DN 20-300 DN 350-600


TERB TERB BNIF

Tee reducing bw Tee reducing bw Branch fitting flgd

DN 20-300 DN 350-600 DN 25-50

ASTM A815 Grade WPS32750 ASTM A815 Grade WP-WX32750(100% RT) ASTM A182 Grade F53

PIPING CLASS – 038220X , Page 2 of 5 Valves Data Sheet No. BAFF VF.038220X.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182-F53/A995 Grade 5A BAFF VF.038220X.22


DN 50-600

Trim: UNS32750, PTFE Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, PTFE

BARF VB.038220X.21 Ball valve 17292 FB (DN 25) flgd DN 15-40 Body: ASTM A182-F53/A995 Grade 5A BARF VB.038220X.22

Ball valve 14313 FB (DN 80, 250) flgd

DN 50-600

Trim: UNS32750, PTFE Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, PTFE

CHDF VC.038220X.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A182-F53/A995 Grade 5A CHDF VC.038220X.23


DN 200-600

Trim: UNS32750, Stellite 6 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6

CHVF VC.038220X.21 Check valve flgd (Piston lift type) DN 15-40 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6 GAVF VG.038220X.21 Gate valve flgd DN 15-600 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6 GLVF VL.038220X.21 Globe valve flgd DN 15-200 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6 VDBT VDB.038220X.21 Double block and bleed Valve DN 15-50

Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, PTFE

Miscellaneous GKSW Gasket spiral wound DN 15-600 Super Duplex SS, graphite filled CS centring-/Super Duplex SS inner ring MTRR Meterrun DN 15-40 UNS32750 ORFS Orifice flange set DN 50-600 ASTM A182-F53

For DN 50-80 (600 Lbs) STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS – 038220X, PAGE 3 OF 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 Item description MESC Pipe Pipe ---------------------------------------------------------Note 1----------------------------------------------------------------------- Note 1 Flanges Blind flange ---------------------------------------------------------Note 1----------------------------------------------------------------------- Note 1

----------Note 1----------------- Note 1 ----------Note 1----------------- Note 1 --------------------------------------------------------Note 1------------------------------- ------------------------------------------------------- -Note 1------------------------------------------------------------------------ Note 1 -------------------------------------------------------- Note 1------------------------------------------------------------------------ Note 1

Spacer ring Spade Spectacle blind Welding neck flange Lapjoint Flange

Fittings Cap bw --------------------------------------------------------Note 1------------------------------------------------------------------------

--------------------------------------------------------Note 1------------------------------------------------------------------------ --------------------------------------------------------Note 1------------------------------------------------------------------------ --------------------------------------------------------Note 1------------------------------------------------------------------------

Note 1 Elbow 45 deg bw Note 1 Elbow 90 deg bw Note 1 Tee equal bw Note 1

Miscellaneous Gasket spiral wound --------------------------------------------------------Note 1------------------------------------------------------------------------

------------Note 1------------------ -------------------------------------Note 1----------------------------------------------

Note 1 Meterrun Orifice flange set Note 1 NOTE 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION.

Valves


NOTE 1 Ball valve 14313 flgd Check valve dual plate double flgd Check valve dual plate Lug type Check valve flgd Piston lift type Gate valve flgd Globe valve flgd Double block and bleed Valve



REDUCING/PIPING COMPONENTS

Run x Br BROB RECB REEB TERB 20 x 15 -----------------------------------Note 1-----------------------------

-----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1-----------------------------

25 x 15 25 x 20 40 x 15 40 x 20 40 x 25 50 x 20 50 x 25 50 x 40 80 x 40 80 x 50

100 x 40 100 x 50 100 x 80 150 x 50 150 x 80 150 x 100 200 x 50 200 x 80 200 x 100 200 x 150 250 x 50 250 x 80 250 x 100 250 x 150 300 x 50 300 x 80 300 x 100 300 x 150 300 x 200 300 x 250 350 x 50 350 x 80 350 x 100 350 x 150 350 x 200 350 x 300 400 x 50 400 x 80 400 x 100 400 x 150 400 x 200 400 x 250 400 400

x x

300 350

450 x 50 450 x 80 450 x 100 450 x 150 450 x 200

Run 450

x X

Br 250

BROB RECB REEB TERB ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------

450 X 300 450 X 350 450 x 400 500 X 50 500 X 100 500 X 150 ------------------------Note 1------------------------

------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------ ------------------------Note 1------------------------

500 X 200 500 x 250 500 x 300 500 x 350 500 x 400 500 600 600 600 600 600 600 600 600 600 600

x x x x x x x x x x x

450 50

100 150 200 250 300 350 400 450 500


PIPING CLASS – 038220X, PAGE 4 OF 5

Branch Run pipe BNIF BNIP

15 40 - 40 ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1--------------> ----------Note 1-------------->

15 50 - 50 15 80 - 200 15 250 - 300 15 350 - 350 15 400 - 400 15 450 - 450 15 500 - 600 20 50 - 50 20 80 - 100 20 150 - 200 20 250 - 250 20 300 - 300 20 350 - 350 20 400 - 400 20 450 - 450 20 500 - 600 25 80 - 80 25 100 - 100 25 150 - 200 25 250 - 250 25 300 - 300 25 350 - 350 25 400 - 400 25 450 - 450 25 500 - 600 40 80 - 80 40 100 - 100 40 150 - 150 40 200 - 200 40 250 - 250 40 300 - 300 40 350 - 350 40 400 - 400 40 450 - 450 40 50

500 80

- -

600 600




BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 70 8138661551 20 4 5/8 x 80 8138662691 25 4 5/8 x 80 8138662691 40 4 3/4 x 100 8138663291 50 8 5/8 x 90 8138662711 80 8 3/4 x 110 8138663301 100 8 3/4 x 120 8138663321 150 12 3/4 x 130 8138663341 200 12 7/8 x 140 8138664041 250 16 1 x 160 8138664721 300 16 1 1/8 x 180 8138665331 350 20 1 1/8 x 180 8138665331 400 20 1 1/4 x 190 8138665921 450 24 1 1/4 x 200 8138665881 500 24 1 1/4 x 210 8138665951 600 24 1 1/2 x 240 8138676871

Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 5/8 x 130 8138662781 25 4 5/8 x 130 8138662781 40 4 3/4 x 140 8138663351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 3/4 x 150 8138663371 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381 350 20 1 1/8 x 220 8138665401 400 20 1 1/4 x 230 8138665981 450 24 1 1/4 x 250 8138666091 500 24 1 1/4 x 260 8138666031 600 24 1 1/2 x 290 8138676901

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 80 8138661571 20 4 5/8 x 90 8138662711 25 4 5/8 x 90 8138662711 40 4 3/4 x 110 8138663301 50 8 5/8 x 100 8138662731 80 8 3/4 x 130 8138663341 100 8 3/4 x 130 8138663341 150 12 3/4 x 150 8138663371 200 12 7/8 x 170 8138664091 250 16 1 x 190 8138664771 300 16 1 1/8 x 210 8138665381 350 20 1 1/8 x 220 8138665401 400 20 1 1/4 x 240 8138666001 450 24 1 1/4 x 250 8138666091 500 24 1 1/4 x 260 8138666031 600 24 1 1/2 x 300 8138676961



CLASS 061412Z Design limits Temperature (°C) 0 50 75 100 125 150 Pressure (Bar ga) DN 15- 100

102.1 100.2 96.7 93.2 91.7 90.2

Notes - -

Intended for glycol service. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).



The use of dual plate check valves is considered most economical. Use swing check valves only where fouling and abrasion are negatively affecting their functionality.

Table of schedules

DN Schedule 15 80 20 80 25 80 40 80 50 40 80 40

100 40

Branch connections 90 degrees PIPING CLASS – 061412Z , Page 1 of 5 Branch Size Run size

15 20 25 40 50 80 100



Carbon steel Plant Qusahwira Phase II FEED Class no. 061412Z Consignee ASME rating CLASS 600 Engineered by Snc Lavalin International Corrosion allowance 1 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395



ASTM A106-B

Flanges BLFL Blind flange DN 15-50 ASTM A105 LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 15-50 ASTMA516-60/65/70 WNFL Welding neck flange DN 15-50

ASTM A105


ASTM A234-WPB

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25 -40 ASTM A105 BNIB Branch fitting bw DN 15-40 ASTM A105 RECB Reducer concentric bw DN 20-100 ASTM A234-WPB REEB Reducer eccentric bw DN 20-100 ASTM A234-WPB TERB Tee reducing bw DN 20-50

ASTM A234-WPB

PIPING CLASS – 061412Z , Page 2 of 5 Valves Data Sheet No. BTFF VF.061412Z.22 Ball valve 14313 flgd DN 50-80

Body: ASTM A105/A216-WCB/WCC Trim: AISI 316, Devlon V


Body: ASTM A105/A216-WCB/WCC Trim: AISI 316, Devlon V

BAFF VF.061412Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A105/A216-WCB/WCC Trim: AISI 316, Devlon V BARF VB.061412Z.21 Ball valve 17292 flgd DN15-40 Body: ASTM A105/A216-WCB/WCC

Trim: AISI 316, Devlon V CHVF VC.061412Z.21 Check valve flgd (Piston lift type) DN 15-40 Body: ASTM A105/A216-WCB/WCC Trim: AISI 316, Stellite 6 CHVF VC.061412Z.22 Check valve dual plate Lug type DN 50-50

Body: ASTM A105/A216-WCB/WCC Trim: AISI 316, Stellite 6

GAVF VG.061412Z.21 Gate valve flgd DN 15-40 Body: ASTM A105/A216-WCB/WCC Trim: AISI 316, Stellite 6 GAVF VG.061412Z.21 Gate valve flgd DN 50-50


GLVF VL.061412Z.21 Globe valve flgd DN 15-40 Body: ASTM A105/A216-WCB/WCC Trim: AISI 316, Stellite 6 GLVF VL.061412Z.21 Globe valve flgd DN 50-50


VDBT VDB.061412Z.21 Double block and bleed Valve DN 15-50 Body: ASTM A350-LF2 Trim: AISI 316, Devlon V NDVF VN.061412Z.21 Needle valve flgd DN 15-15




MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end flanges

ORFS Orifice flange set DN 50-50 ASTM A105 STBT Studbolt with nuts --- ASTM A193-B7/A194-2H



PIPING COMPONENTS PIPING CLASS -061412Z, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 Item description MESC Pipe Pipe 743005 0181 0281 0381 0581 0691 1031 1491 Flanges Blind flange 766210 2081 2121 2161 2181 2201 Lap joint flange 766520 7621 Spectacle blind 768803 0821 0841 0861 0881 0901 Welding neck flange 766279 7521 7541 7561 7581 7101 Fittings Cap bw 763019 0181 0241 0301 0381 0551 Elbow 45 deg bw 763038 5681 5741 5801 5881 6051 Elbow 90 deg bw 763040 5681 5741 5801 5881 6051 Tee equal bw 763084 5681 5741 5801 5881 6051 Valves Ball valve 14313 flgd 770228 6081 6101 Ball valve 14313 flgd 770228 1101 Ball valve 17292 flgd 770025 6031 6041 6051 6071 Ball valve 17292 flgd 770025 1031 1041 1051 1071 Check valve dual plate Lug type NOTE 1 Check valve flgd Piston lift type NOTE 1

Gate valve flgd 772020 4031 4041 4051 4071 Gate valve flgd NOTE 1 Globe valve flgd 773014 1031 1041 1051 1071 Globe valve flgd 773020 1091 Double block and bleed Valve NOTE 1 Needle valve flgd NOTE 1 Miscellaneous Gasket spiral wound 854136 4041 4061 4081 4121 4141 4181 Meterrun 766496 0721 0741 0761 0781 Orifice flange set 766295 0811 Note1

NOTE 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION



20 x 15 7630721371 7630731371 7630890351 25 x 15 7630721471 7630731471 7630890451 25 x 20 7630721571 7630731571 7630890551 40 x 15 7630721671 7630731671 40 x 20 7630721771 7630731771 7630890751 40 x 25 7630721871 7630731871 7630890851 50 x 20 7629461921 7629611921 50 x 25 7630721961 7630731961 7630891091 50 x 40 7630722061 7630732061 7630891181 80 x 40 7630722261 7630732261 80 x 50 7630722351 7630732351 7630891321

100 x 40 7630722501 7630732501 100 x 50 7630722651 7630732651 7630891531 100 x 80 7630722751 7630732751 7630891651


PIPING CLASS -061412Z, Page 4 of 5

Branch Run pipe BNIF BNIP 15 40 - 40 7680372411 7680310361 15 50 - 50 7680372431 7680310371 15 80 - 100 7680372441 7680310381 20 50 - 50 7680372461 7680310401 20 80 - 100 7680372471 7680310411 25 80 - 80 7680372531 7680310451 25 100 - 100 7680372551 7680310461 40 80 - 80 7680372591 7680310511 40 100 - 100 7680372601 7680310521


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 80 8138611571 20 4 5/8 x 90 8138612711 25 4 5/8 x 100 8138612731 40 4 3/4 x 110 8138613301 50 8 5/8 x 110 8138612741 80 8 3/4 x 130 8138613341 100 8 7/8 x 150 8138614061 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138611641 20 4 5/8 x 130 8138612781 25 4 5/8 x 130 8138612781 40 4 3/4 x 140 8138613351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138612781 80 8 3/4 x 140 8138613351 100 8 7/8 x 160 8138614071





CLASS 061440Y Design limits

Temperature (°C) 0 4 50 100 Pressure (Bar ga) DN 15- 200 99.6

99.6 99.6 93.2

Notes - -

Intended for aquifer water service. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).and limited due to allowable stress of bolt material.




Table of schedules

DN Schedule 15 7.71 20 7.93 25 XXS 40 XXS 50 XXS 80 160

100 160 150 120 200 120

PIPING CLASS – 061440Y , Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600



Carbon steel Sour Plant Qusahwira Phase Ii Development Class no. 061440Y Consignee ASME rating CLASS 600 Engineered by Snc Lavalin International Corrosion allowance 6 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-200 ASTM A106-B Flanges BLFL Blind flange DN 15-200 ASTM A105N LJFL Lap joint flange DN 50-50 ASTM A182 F316 SBFL Spectacle blind DN 15-200 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-200 ASTM A105N Fittings CAPB Cap bw DN 15-200 ASTM A234-WPB E45B Elbow 45 deg bw DN 15-200 ASTM A234-WPB E90B Elbow 90 deg bw DN 15-200 ASTM A234-WPB TEEB Tee equal bw DN 15-200 ASTM A234-WPB Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-50 ASTM A105N BNIB Branch fitting bw DN 15-40 ASTM A105N BROB Branch outlet bw DN 150-200 ASTM A105N RECB Reducer concentric bw DN 20-200 ASTM A234-WPB REEB Reducer eccentric bw DN 20-200 ASTM A234-WPB TERB Tee reducing bw DN 20-200 ASTM A234-WPB

PIPING CLASS – 061440Y , Page 2 of 5 Valves Data Sheet No. BAFF VF.061440Y.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Devlon V BARF VB.061440Y.21 Ball valve 17292 FB (DN 25) flgd DN 15-40 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Devlon V BTFF VF.061440Y.22 Ball valve 14313 flgd DN 50-200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Devlon V BTRF VB.061440Y.22 Ball valve 14313 flgd DN 50 -200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Devlon V CHDF VC.061440Y.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A105N/A216-WCB/WCC CHDF VC.061440Y.23

Check valve dual plate double flange

DN 200-200

Trim: Super Duplex, Stellite 6 Body: ASTM A105N/A216-WCB/WCC Trim:Super Duplex, Stellite 6

CHSF VC.061440Y.24 Check valve swing type DN 50-200 Body: ASTM A105N/A216-WCB/WCC Trim:Super Duplex, Stellite 6

CHVF VC.061440Y.21 Check valve (Piston lift type) DN 15-40 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GAVF VG.061440Y.21 Gate valve flgd DN 15-200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GLVF VL.061440Y.21 Globe valve flgd DN 15-200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 VDBT VDB.061440Y.21 Double block and bleed Valve DN 15-50 Body: ASTM A350-LF2 Trim: Super Duplex, Devlon V

Miscellaneous GKSW Gasket spiral wound DN 15-200 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-200 ASTM A105N ST3B Strainer Y-type (3 mm ca) DN 50-200 Sieve: UNS S32750/S32760 STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENETS

PIPING CLASS- 061440Y, Page 3 of 5

Nominal pipe size 15 20 25 40 50 80 100 150 200 Item description MESC Pipe Pipe 743003 Note 2 Note2 0421 0621 0751 1131 1611 2231 2631 Flanges Blind flange 766210 Note 2 Note 2 2161 2181 2201 2221 2241 2261 2281 Spectacle blind 768837 Note 2 Note 2 0861 0881 0901 0921 0941 0961 0981 Welding neck flange Lap joint flange

766279 766520

Note1 Note1 Note1 Note1

Note1 Note1

8121 8141 7961 Note1

Fittings Cap bw 763017 Note 1 Note 1 5831 5931 6131 6321 6521 6701 6911 Elbow 45 deg bw 763034 Note 1 Note 1 5831 5931 6131 6321 6521 6701 6911 Elbow 90 deg bw 763042 Note 1 Note 1 5831 5931 6131 6321 6521 6701 6911 Tee equal bw 763081 Note 1 Note 1 5831 5931 6131 6321 6521 6701 6911 Valves Ball valve 14313 flgd 770067 6081 6101 6121 6141 6151 Ball valve 14313 flgd 770067 1081 1101 1121 1141 1151 Ball valve 17292 flgd 770025 6031 6041 6051 6071 Ball valve 17292 flgd 770025 1031 1041 1051 1071 Check valve dual plate double flgd NOTE 1 Check valve swing type flgd NOTE 1 Check valve dual plate Lug type Check valve flgd Piston lift type

NOTE 1 NOTE 1

Gate valve flgd 772004 1031 1041 1051 1071 1081 1101 1121 1141 1151 Globe valve flgd 773005 1031 1041 1051 1071 1081 1101 1121 1141 1151 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 4041 4061 4081 4121 4141 4181 4201 4241 4261 Meterrun

-------------- NOTE1------------- Orifice flange set 766295 Note1 1431 1451 Note1 Note1 Strainer Y-type (3mm ca) -------------- Note 1 ---------------

NOTE 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION.



20 x 15 NOTE 2 NOTE 2 NOTE 2 25 x 15 7630661521 7630661521 7630880501 25 x 20 7630661621 7630661621 7630880601 40 x 15 7630661671 7630661671 40 x 20 7630661821 7630661821 7630880801 40 x 25 7630661921 7630661921 7630880901 50 x 20 Note1 Note1 50 x 25 7630662021 7630662021 7630881081 50 x 40 7630662121 7630662121 7630881171 80 x 40 7630662331 7630662331 80 x 50 Note1 Note1 Note1

100 x 40 7630662571 7630662571 100 x 50 7630662741 7630662741 7630881631 100 x 80 7630662811 7630662811 7630881671 150 x 50 Note1 150 x 80 7630663001 7630663001 7630881851 150 x 100 Note1 Note1 Note 1 200 x 50 Note1 200 x 80 7679030161 200 x 100 Note1 Note1 Note 1 200 x 150 7630663391 7630663391 7630882271



Branch Run pipe BNIF BNIP 15 40 - 200 Note 1 20 50 - 50 Note 1 20 80 - 150 Note 1 20 200 - 200 Note 1 25 80 - 200 7680310761 40 80 - 80 Note 1 7680310791 40 100 - 200 Note 1 7680310811 50 100- 200 Note 1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 80 8138661571 20 4 5/8 x 90 8138662711 25 4 5/8 x 100 8138662731 40 4 3/4 x 110 8138663301 50 8 5/8 x 110 8138662741 80 8 3/4 x 130 8138663341 100 8 7/8 x 150 8138664061 150 12 1 x 180 8138664751 200 12 1 1/8 x 200 8138665251 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 5/8 x 130 8138662781 25 4 5/8 x 130 8138662781 40 4 3/4 x 140 8138663351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 7/8 x 160 8138664071 150 12 1 x 190 8138664771 200 12 1 1/8 x 220 8138665401

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 90 8138661591 20 4 5/8 x 100 8138662731 25 4 5/8 x 110 8138662741 40 4 3/4 x 120 8138663321 50 8 5/8 x 130 8138662781 80 8 3/4 x 150 8138663371 100 8 7/8 x 170 8138664091 150 12 1 x 200 8138664971 200 12 1 1/8 x 230 8138665411




CLASS 061440U Design limits Temperature (°C) 0 50 75 100 125 150 Pressure (Bar ga) DN 25- 150 99.6 99.6 96.4 93.2 91.7 90.2 Notes - Intended for Underground Process drain service

Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes)., and limited by allowable stress of bolting material



The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality Minimum line size for underground buried drain service is DN100.

Table of schedules

DN Schedule 25 160 40 160 50 160 80 80

100 80 150 80

PIPING CLASS – 061440U , Page 1 of 5 Branch connections 90 degrees Branch Size Run size

25 40 50 80 100 150 200 250 300 350 400 450 500 600

600 C C E E E E E E B B B B B A 500 C C E E E E E E B B B B A 450 C C E E E E E B B B B A 400 C C E E E E E B B B A 350 C C E E E E B B B A 300 C C E E E B B B A 250 C C E E B B B A 200 C C E E B B A 150 C C E B B A 100 C C B B A 80 C C B A 50 B B A 40 B A 25 A




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 25-150 ASTM A106-B Flanges BLFL Blind flange DN 25-150 ASTM A105 LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 25-150 ASTM A516-60/65/70 WNFL Welding neck flange DN 25-150 ASTM A105 Fittings CAPB Cap bw DN 25-150 ASTM A234-WPB E45B Elbow 45 deg bw DN 25-150 ASTM A234-WPB E90B Elbow 90 deg bw DN 25-150 ASTM A234-WPB TEEB Tee equal bw DN 25-150 ASTM A234-WPB

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-40 ASTM A105N BNIB Branch fitting bw DN 15-40 ASTM A105N BROB Branch outlet bw DN 150-150 ASTM A105N RECB Reducer concentric bw DN 25-150 ASTM A234-WPB REEB Reducer eccentric bw DN 25-150 ASTM A234-WPB TERB Tee reducing bw DN 25-150 ASTM A234-WPB

PIPING CLASS – 061440U , Page 2 of 5 Valves Valve Data Sheet No. BTFF VF.061440Z.22 Ball valve 14313 flgd DN 50-150 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Devlon V BTRF VB.061440Z.22 Ball valve 14313 flgd DN 50-150 Body: ASTM A105/A216-WCB/WCC Trim: Super Duplex, Devlon V CHVF VC.061440Z.21 Check valve (Piston lift type) DN 25-40 Body: ASTM A105/ A216-WCB/WCC Trim: Super Duplex, Stellite 6 CHDF VC.061440Z.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A105/ A216-WCB/WCC Trim: Super Duplex, Stellite 6 GAVF VG.061440Z.21 Gate valve flgd DN 25-150 Body: ASTM A105/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GLVF VL.061440Z.21 Globe valve flgd DN 25-150 Body: ASTM A105/A216-WCB/WCC Trim: Super Duplex, Stellite 6 VDBT VDB.061440Z.21 Double block and bleed Valve DN 25-50 Body: ASTM A105N Trim: Super Duplex, Devlon V

Miscellaneous GKSW Gasket spiral wound DN 25-150 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 25-40 Alloy 400/ASTM A105N end flanges ORFS Orifice flange set DN 25-150 ASTM A105 STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS -061440U , Page 3 of 5 PIPING COMPONENTS Nominal pipe size 25 40 50 80 100 150 Item description MESC Pipe Pipe 743003 0401 0601 0731 1091 1571 2191 Flanges Blind flange 766210 2161 2181 2201 2221 2241 2261 Lapjoint flange Note1 Spectacle blind 768837 0861 0881 0901 0921 0941 0961 Welding neck flange 766279 8061 8081 8101 7621 7641 7661 Fittings Cap bw 763017 5821 5921 6121 6281 6481 6681 Elbow 45 deg bw 763034 5821 5921 6121 6281 6481 6681 Elbow 90 deg bw 763042 5821 5921 6121 6281 6481 6681 Tee equal bw 763081 5821 5921 6121 6281 6481 6681 Valves Ball valve 14313 flgd 770067 6081 6101 6121 6141 Ball valve 14313 flgd 770067 1081 1101 1121 1141 1151 Check Valve(Piston lift type) NOTE 1 Check valve dual plate Lug type NOTE 1 Gate valve flgd 772004 1051 1071 1081 1101 1121 1141 Globe valve flgd 773005 1051 1071 1081 1101 1121 1141 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 4081 4121 4141 4181 4201 4241 Meterrun 766496 0741 0761 0781 Orifice flange set 766295 1061 1071 1081

NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL. 9.12OF THIS SPECIFICATION.




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING/ PIPING COMPONENTS Run x Br BROB RECB REEB TERB

40 x 25 7630661911 7630671911 7630880891 50 x 25 7630662011 7630672011 7630881071 50 x 40 7630662111 7630672111 7630881161 80 x 40 7630662291 7630672291 80 x 50 7630662381 7630672381 7630881071

100 x 40 7630662531 7630672531 100 x 50 7630662681 7630672681 7630881591 100 x 80 7630662771 7630672771 7630881661 150 x 50 Note 1 150 x 80 7630662971 7630672971 7630881781 150 x 100 7630663071 7630673071 7630881901






Page

BOLTING Boltset standard flange DN nr inch x mm MESC number 25 4 5/8 x 100 8138662731 40 4 3/4 x 110 8138663301 50 8 5/8 x 110 8138662741 80 8 3/4 x 130 8138663341 100 8 7/8 x 150 8138664061 150 12 1 x 180 8138664751 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 5/8 x 130 8138662781 25 4 5/8 x 130 8138662781 40 4 3/4 x 140 8138663351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 7/8 x 160 8138664071 150 12 1 x 190 8138664771

Boltset blind/spacer DN nr inch x mm MESC number 25 4 5/8 x 110 8138662741 40 4 3/4 x 120 8138663321 50 8 5/8 x 130 8138662781 80 8 3/4 x 150 8138663371 100 8 7/8 x 170 8138664091 150 12 1 x 200 8138664971




CLASS 061502Z Design limits Temperature (°C) -45 0 50 75 100 125 150 180 Pressure (Bar ga) DN 15- 300 99.6 99.6 99.6 96.4 93.2 91.7 90.2 88.7 Notes - Intended for Process Gas Service

Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes)., and limited by allowable stress of bolting material




Table of schedules

DN Schedule 15 160 20 160 25 160 40 160 50 160 80 80

100 80 150 80 200 80 250 80 300 80


15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600



Carbon steel LT F-Gr Sour Plant Qusahwira Phase II FEED Class no. 061502Z Consignee ASME rating CLASS 600 Engineered by snc lavalin international Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-300 ASTM A333-6 Flanges BLFL Blind flange DN 15-300 ASTM A350-LF2 LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 15-200 ASTM A516-60/65/70 SPFL Spade DN 250-300 ASTM A516-60/65/70 SPRT Spacer ring DN 250-300 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-300 ASTM A350-LF2 Fittings CAPB Cap bw DN 15-300 ASTM A420-WPL6 E45B Elbow 45 deg bw DN 15-300 ASTM A420-WPL6 E90B Elbow 90 deg bw DN 15-300 ASTM A420-WPL6 TEEB Tee equal bw DN 15-300 ASTM A420-WPL6 Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-50 ASTM A350-LF2 BNIB Branch fitting bw DN 15-40 ASTM A350-LF2 BROB Branch outlet bw DN 150-300 ASTM A350-LF2 RECB Reducer concentric bw DN 20-300 ASTM A420-WPL6 REEB Reducer eccentric bw DN 20-300 ASTM A420-WPL6 TERB Tee reducing bw DN 20-300 ASTM A420-WPL6

PIPING CLASS – 061502Z , Page 2 of 5 Valves Data Sheet No. BTFF BTRF

VF.061502Z.21 VB.061502Z.21


DN 15-40 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, PEEK DN 15-40 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, PEEK

BTFF VF.061502Z.22 Ball valve 14313 flgd DN 50-300 Body: ASTM A352-LCC/A352-LCC Trim: AISI 316, PEEK BTRF VB.061502Z.22 Ball valve 14313 flgd DN 50-300 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, PEEK CHDF VC.061502Z.23 Check valve dual plate double flgd DN 200-300 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 CHVF VC.061502Z.21 Check valve (piston type) DN 15-40 Body: ASTM A350-LF2/A352-LCC CHDF VC.061502Z.22


DN 50-150

Trim: AISI 316, Stellite 6 Body:ASTM A350-LF2/A352-LCC Trim:AISI 316, Stellite 6

GAVF VG.061502Z.21 Gate valve flgd DN 15-300 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 GLVF VL.061502Z.22 Globe valve flgd DN 15-200 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 NDVF VN.061502Z.22 Needle valve flgd DN 15-15 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 VDBT VDB.061502Z.21 Double block and bleed Valve DN 15-50 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, PEEK Miscellaneous GKSW Gasket spiral wound DN 15-300 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-300 ASTM A350-LF2 STBT Studbolt with nuts --- ASTM A320-L7M/A194-7M


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS – 061502Z, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 Item description MESC Pipe Pipe 743016 0231 0301 0381 0541 0631 0691 0771 0861 0981 1101 1221 Flanges Blind flange 766212 5581 5621 5661 5681 5701 5721 5741 5761 5781 5801 5821 Spectacle blind 768835 4081 4121 4161 4181 4201 4221 4241 4261 4281 Spacer ring 1801 1821 Spade 0491 0501 Welding neck flange 766286 2621 2641 2661 2681 2701 1621 1641 1661 1681 1701 1721 Lap joint flange 766520 7621 Fittings Cap bw 763117 1721 1781 1821 1921 2121 2301 2481 2681 2881 3101 3321 Elbow 45 deg bw 763134 1721 1781 1821 1921 2121 2301 2481 2681 2881 3101 3321 Elbow 90 deg bw 763143 1721 1781 1821 1921 2121 2301 2481 2681 2881 3101 3321 Tee equal bw 763180 1721 1781 1821 1921 2121 2301 2481 2681 2881 3101 3321 Valves Ball valve 14313 flgd 770077 6081 6101 6121 6141 6151 6161 6171 Ball valve 14313 flgd 770077 1081 1101 1121 1141 1151 1161 1171 Ball valve 17292 flgd 770031 6031 6041 6051 6071 Ball valve 17292 flgd 770031 1031 1041 1051 1071 Check valve dual plate double flgd 776720 1151 1161 1171 Check valve dual plate Lug type NOTE 1 Check valve flgd Piston lift type NOTE 1 Gate valve flgd 772033 1031 1041 1051 1071 4081 4101 4121 4141 4151 4161 4171 Globe valve flgd 773033 1031 1041 1051 1071 7081 7101 7121 7141 7151 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 4041 4061 4081 4121 4141 4181 4201 4241 4261 4281 4301 Meterrun 766496 0721 0741 0761 0781 Orifice flange set 766297 1241 1131 1141 1151 1161 1171 1181

NOTE 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS PECIFICATION





20 x 15 7631661411 7631751411 7631880391 25 x 15 7631661511 7631751511 7631880491 25 x 20 7631661611 7631751611 7631880591 40 x 15 7631661711 7631751711 40 x 20 7631661811 7631751811 7631880791 40 x 25 7631661911 7631751911 7631880891 50 x 20 7631661951 7631751951 50 x 25 7631662011 7631752011 7631881071 50 x 40 7631662111 7631752111 7631881161 80 x 40 7631662291 7631752291 80 x 50 7631662381 7631752381 7631881381

100 x 40 7631662531 7631752531 100 x 50 7631662681 7631752681 7631881591 100 x 80 7631662771 7631752771 7631881661 150 x 50 7679061841 150 x 80 7631662971 7631752971 7631881781 150 x 100 7631663071 7631753071 7631881901 200 x 50 7679061861 200 x 80 7679053901 200 x 100 7631663271 7631753271 7631882061 200 x 150 7631663371 7631753371 7631882261 250 x 50 7679061881 250 x 80 7679053921 250 x 100 7631663451 7631753451 7631882541 250 x 150 7631663581 7631753581 7631882721 250 x 200 7631663671 7631753671 7631882931 300 x 50 7679061901 300 x 80 7679053941 300 x 100 7679054161 300 x 150 7631663851 7631753851 7631883111 300 x 200 7631663971 7631753971 7631883301 300 x 250 7631664081 7631754081 7631883521



Branch Run pipe BNIF BNIP 15 40 - 300 7680377211 7680311161 20 50 - 50 7680377221 7680311121 20 80 - 150 7680377241 7680311001 20 200 - 300 7680377271 7680310991 25 80 - 250 7680377281 7680310971 25 300 - 300 7680377291 7680310951 40 80 - 80 7680377321 7680310931 40 100 - 200 7680377331 7680310911 40 250 - 300 7680377341 7680310891 50 80 - 300 Note 1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 80 8138671571 20 4 5/8 x 90 8138672711 25 4 5/8 x 100 8138672731 40 4 3/4 x 110 8138673301 50 8 5/8 x 110 8138672741 80 8 3/4 x 130 8138673341 100 8 7/8 x 150 8138674061 150 12 1 x 180 8138674751 200 12 1 1/8 x 200 8138675441 250 16 1 1/4 x 220 8138675971 300 20 1 1/4 x 230 8138675981 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138671641 20 4 5/8 x 130 8138672781 25 4 5/8 x 130 8138672781 40 4 3/4 x 140 8138673351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 7/8 x 160 8138674071 150 12 1 x 190 8138674771 200 12 1 1/8 x 220 8138675401 250 16 1 1/4 x 240 8138676001 300 20 1 1/4 x 250 8138676061


Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 90 8138671591 20 4 5/8 x 100 8138672731 25 4 5/8 x 110 8138672741 40 4 3/4 x 120 8138673321 50 8 5/8 x 130 8138672781 80 8 3/4 x 150 8138673371 100 8 7/8 x 170 8138674091 150 12 1 x 200 8138674811 200 12 1 1/8 x 230 8138675411 250 16 1 1/4 x 260 8138676031 300 20 1 1/4 x 270 8138676051


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 063451Z Design limits Temperature (°C) -101 0 50 75 100 125 150 180 Pressure (Bar ga) DN 15- 100 99.3 99.3 96.2 90.3 84.4 80.7 77.0 73.6 Notes - -

Intended for hydrocarbon condensate,Bactericide,corrosion Inhibitor,Demulsifier services. Design limits acc. to ASME B16.5 flange rating mat. grp 2.2 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).

- For bending of pipe see DEP 31.38.01.31-Gen. - For basis of design see DEP 31.38.01.10-Gen. - External protection as per ADCO Doc 30.78.12.0668 is required for design temperatures > 50 degr. C

in saliferous atmospheres to prevent chloride stress corrosion cracking(Ref TB 28,PI-3) - When chlorides are present in the process fluid in conjunction with free oxygen, the max. temperature

is limited to 50 deg C, to prevent chloride stress corrosion cracking - The use of red. bore ball valves is considered most economical. Use full bore ball valves only

when necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - Table of schedules


100 40S

PIPING CLASS – 063451Z , Page 1 of 5 Branch Connections 90 degrees


15 20 25 40 50 80 100



Stainl steel AISI 316L LT Sour Plant Qusahwira Phase II FEED Class no. 063451Z Consignee ASME rating CLASS 600 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-100 ASTM A312-TP316L Flanges BLFL Blind flange DN 15-100 ASTM A182-F316 LJFL Lap joint flange DN 40-40 ASTM A182-F316 SBFL Spectacle blind DN 15-100 ASTM A240-TP316 WNFL Welding neck flange DN 15-100 ASTM A182-F316 Fittings CAPB Cap bw DN 15-100 ASTM A403-WP316L E45B Elbow 45 deg bw DN 15-100 ASTM A403-WP316L E90B Elbow 90 deg bw DN 15-100 ASTM A403-WP316L TEEB Tee equal bw DN 15-100 ASTM A403-WP316L Reducing fittings BNIF Branch fitting flgd DN 25-40 ASTM A182-F316 BNIP Branch fitting bw DN 15-40 ASTM A182-F316 RECB Reducer concentric bw DN 20-100 ASTM A403-WP316L REEB Reducer eccentric bw DN 20-100 ASTM A403-WP316L TERB Tee reducing bw DN 20-100 ASTM A403-WP316L

Valves Valve Data Sheet No. PIPING CLASS – 063451Z , Page 2 of 5 BAFF VF.063451Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182- F316/A351-CF8M

Trim: AISI 316, PEEK BTFF VF.063451Z.22 Ball valve 14313 flgd DN 50-100 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK BARF VB.063451Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182- F316/A351-CF8M

Trim: AISI 316, PEEK BTRF VB.063451Z.22 Ball valve 14313 flgd DN 50-100 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK CHVF VC.063451Z.21 Check valve (piston lift type)

DN 15-40 Body: ASTM A182-F316/A351-CF8M

Trim: AISI 316, Stellite 6 CHDF VC.063451Z.22 Check valve dual plate Lug type


Trim: AISI 316, Stellite 6 GAVF VG.063451Z.21 Gate valve flgd DN 15-100 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 GLVF VL.063451Z.21 Globe valve flgd DN 15-100 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 VDBT VDB.063451Z.21 Double block and bleed Valve DN 15-50 Body: ASTM A182-F316 Trim: AISI 316, PEEK Miscellaneous GKSW Gasket spiral wound DN 15-100 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/AISI 316 end flanges ORFS Orifice flange set DN 50-100 ASTM A182-F316 STBT Studbolt with nuts --- ASTM A320-B8M/A194-8MA


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS – 063451Z, PAGE 3 OF 5 Nominal pipe size 15 20 25 40 50 80 100 Item description MESC Pipe Pipe 743633 0181 0261 0341 0501 0581 0661 0741 Flanges Blind flange 766510 4621 4641 4661 4681 4701 4721 4741 Spectacle blind 768810 4081 4121 4161 4181 4201 4221 4241 Welding neck flange 766580 4821 4841 4861 4881 4901 4921 4941 Lap joint flange 766520 7621 Fittings Cap bw 763319 2861 2961 3061 3261 3361 3561 3761 Elbow 45 deg bw 763337 2861 2961 3061 3261 3361 3561 3761 Elbow 90 deg bw 763341 2861 2961 3061 3261 3361 3561 3761 Tee equal bw 763384 7861 7961 8061 8261 8361 8561 8761 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

770325 6031 6041 6051 6071 770325 1031 1041 1051 1071 770373 6081 6101 6121

Ball valve 14313 flgd Check valve dual plate Lug type

770373 1101 1121 NOTE 1

Check valve flgd Piston lift type NOTE 1 Gate valve flgd 772305 1031 1041 1051 1071 4081 4101 4121 Globe valve flgd 773305 1031 1041 1051 1071 1081 1101 1121 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 4041 4061 4081 4121 4141 4181 4201 Meterrun 766496 0221 0241 0261 0281 Orifice flange set 766592 5091 5101 5111 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION



REDUCING/PIPING COMPONENTS Comp.name Description BNIF Branch fitting flgd BNIP Branch fitting plain BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw

PIPING CLASS – 063451Z, PAGE 4 OF 5

Run x Br BROB RECB REEB TERB 20 x 15 7633705661 7633725661 7633856181 25 x 15 7633705761 7633725761 7633856281 25 x 20 7633705861 7633725861 7633856381 40 x 15 7633705961 7633725961 40 x 20 7633706161 7633726161 7633856481 40 x 25 7633706261 7633726261 7633856581 50 x 20 7636500941 7636630941 50 x 25 7633706361 7633726361 7633856741 50 x 40 7633706461 7633726461 7633856841 80 x 40 7633706761 7633726761 80 x 50 7633706861 7633726861 7633893541

100 x 40 7633706941 7633726941 100 x 50 7633707061 7633727061 7633893701 100 x 80 7633707161 7633727161 7633893781

Branch Run pipe BNIF BNIP 15 40 - 40 Note 1 15 50 - 50 Note 1 15 80 - 100 Note 1 20 50 - 50 Note 1 20 80 - 100 Note 1 25 80 - 80 Note 1 25 100 - 100 Note 1 40 80 - 80 7680394461 Note 1 40 100 - 100 7680394471 Note 1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 80 Note 1 20 4 5/8 x 90 Note 1 25 4 5/8 x 100 Note 1 40 4 3/4 x 110 Note 1 50 8 5/8 x 110 Note 1 80 8 3/4 x 130 Note 1 100 8 7/8 x 150 Note 1 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 Note 1 20 4 5/8 x 130 Note 1 25 4 5/8 x 130 Note 1 40 4 3/4 x 140 Note 1 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 Note 1 80 8 3/4 x 140 Note 1 100 8 7/8 x 160 Note 1

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 90 Note 1 20 4 5/8 x 100 Note 1 25 4 5/8 x 110 Note 1 40 4 3/4 x 120 Note 1 50 8 5/8 x 130 Note 1 80 8 3/4 x 150 Note 1 100 8 7/8 x 170 Note 1





ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 068220X Design limits Temperature (°C) -29 0 50 100 125 150 180 Pressure (Bar ga) DN 15- 300 103.4 103.4 103.4 101.3 96.6 91.9 87.9 Notes - -

Intended for process drain,drain,glycol,hydrocarbon condensate, glycol drain, process gas & vent gas services. Design limits acc. to ASME B16.5 flange rating mat. grp 2.8 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).


when necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - - - -

The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality ASTM A995 Gr.5A to be used for casting of SDSS valves as pressure containing part. A928 CL.1 can be used as a substitue for ASTM A790 UNS S32750( WELDED)

Table of schedules


100 10S 150 40S 200 40S 250 300

40S 40S



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS – 068220X, Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-300 ASTM A790-UNS S32750 Flanges BLFL Blind flange DN 15-300 ASTM A182 Grade F53 LJFL Lap joint flange DN 40-40 ASTM A182 Grade F53 SBFL Spectacle blind DN 15-200 ASTM A182 Grade F53 SPFL Spade DN 250-300 ASTM A182 Grade F53 SPRT Spacer ring DN 250-300 ASTM A182 Grade F53 WNFL Welding neck flange DN 15-300 ASTM A182 Grade F53 Fittings CAPB Cap bw DN 15-300 ASTM A815 Grade WPS32750 E45B Elbow 45 deg bw DN 15-300 ASTM A815 Grade WPS32750 E90B Elbow 90 deg bw DN 15-300 ASTM A815 Grade WPS32750 TEEB Tee equal bw DN 15-300 ASTM A815 Grade WPS32750 Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A182 Grade F53 BNIF Branch fitting flgd DN 25 -50 ASTM A182 Grade F53 BROB Branch outlet bw DN 150-300 ASTM A182 Grade F53 RECB Reducer concentric bw DN 20-300 ASTM A815 Grade WPS32750 REEB Reducer eccentric bw DN 20-300 ASTM A815 Grade WPS32750 TERB Tee reducing bw DN 20-300 ASTM A815 Grade WPS32750

PIPING CLASS – 068220X, Page 2 of 5 Valves Valve Tag No.

BAFF VF.068220X.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182-F53/A995 GR.5A Trim: UNS32750, PEEK BARF VB.068220X.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182-F53/A995 GR.5A Trim: UNS32750, PEEK BAFF VF.068220X.22 BARF VB.068220X.22

Ball Valve 14313 flgd Ball Valve 14313 FB (DN 150) flgd

DN 50-300 DN 50-300

Body:ASTM A182-F53/A995 GR.5A Trim:UNS32750,PEEK Body:ASTM A182-F53/A995 GR.5A Trim:UNS32750,PEEK

CHDF VC.068220X.23 Check valve dual plate double flgd DN200 -300 Body: ASTM A182-F53/A995 GR.5A Trim: UNS32750, Stellite 6 CHVF VC.068220X.21 Check valve (piston type) DN 15-40 Body: ASTM A182-F53/A995 GR.5A CHDF VC.068220X.22


DN 50-150

Trim: UNS32750, Stellite 6 Body:ASTM A182-F53/A995 GR.5A Trim:UNS32750,Stellite 6

GAVF VG.068220X.21 Gate valve flgd DN 15-300 Body: ASTM A182-F53/A995 GR.5A Trim: UNS32750, Stellite 6 GLVF VL.068220X.21 Globe valve flgd DN 15-200 Body: ASTM A182-F53/A995 GR.5A Trim: UNS32750, Stellite 6 NDVF VN.068220X.21 Needle valve flgd DN 15 -15 Body: ASTM A182-F53/A995 GR.5A Trim: UNS32750, Stellite 6 VDBT VDB.068220X.21 Double block and bleed Valve DN 15-50 Body: ASTM A182-F53/A995 GR.5A Trim: UNS32750, PEEK

Miscellaneous

GKSW Gasket spiral wound DN 15-300 Super Duplex SS, graphite filled CS centring-/Super Duplex SS inner ring MTRR Meterrun DN 15-40 UNS32750 ORFS Orifice flange set DN 50-200 ASTM A182-F53 STBT Studbolt with nuts DN 15-200 ASTM A193-B7M/A194-2HM


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS – 068220X, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 Item description MESC Pipe Pipe <------- ------ ------- ------- Note1 ------ ------- ------- -------- ---- Note1 Note1 Flanges Blind flange <------ ------- ------- ------- ------ Note 1 ------- -------- ------- ---- Note1 Note1 Spacer ring Note1 Note1 Spade Note1 Note1 Spectacle blind <------ ------- ------- ------- ------ Note 1 ------- -------- ------- ---- Welding neck flange

<------ ------- ------- ------- ------ Note 1 ------- -------- ------- ---- Note1 Note1

Lap Joint flange Note1 Fittings Cap bw <------ ------- ------- ------- ------ Note 1 ------- -------- ------- ---- Note1 Note1 Elbow 45 deg bw <------ ------- ------- ------- ------ Note 1 ------- -------- ------- ---- Note1 Note1 Elbow 90 deg bw <------ ------- ------- ------- ------ Note 1 ------- -------- ------- ---- Note1 Note1 Tee equal bw <------ ------- ------- ------- ------ Note 1 ------- -------- ------- ---- Note1 Note1 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

Ball valve 14313 flgd Check valve flgd Piston lift type NOTE 1 Check valve dual plate Lug type Check valve dual plate double flgd Gate valve flgd Globe valve flgd Double block and bleed Valve Needle valve flgd

Miscellaneous Gasket spiral wound <------ ------- ------- ------- Note 1 -------- --------- ------- ------> Note1 Note1 Meterrun <------ Note 1 ------- ----- Orifice flange set <------ ------- ------- ------- Note 1 -------- --------- ------- ------ Note1 Note1 NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL. 9.12OF THIS SPECIFICATION.



20 x 15 NOTE1 NOTE1 NOTE1 25 x 15 NOTE1 NOTE1 NOTE1 25 x 20 NOTE1 NOTE1 NOTE1 40 x 15 NOTE1 NOTE1 40 x 20 NOTE1 NOTE1 NOTE1 40 x 25 NOTE1 NOTE1 NOTE1 50 x 20 NOTE1 NOTE1 50 x 25 NOTE1 NOTE1 NOTE1 50 x 40 NOTE1 NOTE1 NOTE1 80 x 40 NOTE1 NOTE1 80 x 50 NOTE1 NOTE1 NOTE1

100 x 40 NOTE1 NOTE1 100 x 50 NOTE1 NOTE1 NOTE1 100 x 80 NOTE1 NOTE1 NOTE1 150 x 50 NOTE1 150 x 80 NOTE1 NOTE1 NOTE1 150 x 100 NOTE1 NOTE1 NOTE1 200 x 50 NOTE1 200 x 80 NOTE1 200 x 100 NOTE1 NOTE1 NOTE1 200 x 150 NOTE1 NOTE1 NOTE1 250 x 50 NOTE1 250 x 80 NOTE1 250 x 100 NOTE1 NOTE1 NOTE1 250 x 150 NOTE1 NOTE1 NOTE1 250 x 200 NOTE1 NOTE1 NOTE1 300 x 50 NOTE1 300 x 80 NOTE1 300 x 100 NOTE1 300 x 150 NOTE1 NOTE1 NOTE1 300 x 200 NOTE1 NOTE1 NOTE1 300 x 250 NOTE1 NOTE1 NOTE1

Comp.name Description BNIB Branch fitting bw BNIF Branch fitting flgd BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw



PIPING CLASS – 068220X, Page 4 of 5

Branch Run pipe BNIB BNIF 15 40 - 300 NOTE1 NOTE1 20 50 - 50 NOTE1 NOTE1 20 80 - 150 NOTE1 NOTE1 20 200 - 300 NOTE1 NOTE1 25 80 - 250 NOTE1 NOTE1 25 300 - 300 NOTE1 NOTE1 40 80 - 80 NOTE1 NOTE1 40 100 - 200 NOTE1 NOTE1 40 200 - 300 NOTE1 NOTE1 50 80 - 300 NOTE1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 1/2 x 80 8138661571 20 4 5/8 x 90 8138662711 25 4 5/8 x 100 8138662731 40 4 3/4 x 110 8138663301 50 8 5/8 x 110 8138662741 80 8 3/4 x 130 8138663341 100 8 7/8 x 150 8138664061 150 12 1 x 180 8138664751 200 12 1 1/8 x 200 8138665251 250 16 1 1/4 x 220 8138665971 300 20 1 1/4 x 230 8138665981 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138661641 20 4 5/8 x 130 8138662781 25 4 5/8 x 130 8138662781 40 4 3/4 x 140 8138663351 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138662781 80 8 3/4 x 140 8138663351 100 8 7/8 x 160 8138664071 150 12 1 x 190 8138664771 200 12 1 1/8 x 220 8138665401 250 16 1 1/4 x 240 8138666001 300 20 1 1/4 x 250 8138666091

Boltset blind/spacer DN nr inch x mm MESC number 15 4 1/2 x 90 8138661591 20 4 5/8 x 100 8138662731 25 4 5/8 x 110 8138662741 40 4 3/4 x 120 8138663321 50 8 5/8 x 130 8138662781 80 8 3/4 x 150 8138663371 100 8 7/8 x 170 8138664091 150 12 1 x 200 8138664971 200 12 1 1/8 x 230 8138665411 250 16 1 1/4 x 260 8138666031 300 20 1 1/4 x 270 8138666051




CLASS 091440U Design limits Temperature (°C) 0 50 75 100 125 150 Pressure (Bar ga) DN 25- 150 142.7 142.7 141.2 139.8 137.5 135.2 Notes - -

Intended for underground process drain service. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).and ASME B31.3 allowable internal pressure, and limited by allowable stress of bolting material



The use of dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality Minimum line size for underground buried drain service is DN100.

Table of schedules

DN Schedule 25 160 40 160 50 160 80 160

100 120 150 120



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS – 091440U, Page 1 of 5 Branch connections 90 degrees Branch Size Run size

25 40 50 80 100 150 200 250 300 350 400 450 500 600




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 25-150 ASTM A106-B Flanges BLFL Blind flange DN 25-150 ASTM A105 LJFL Lapjoint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 25-150 ASTM A516-60/65/70 WNFL Welding neck flange DN 25-150 ASTM A105 Fittings CAPB Cap bw DN 25-150 ASTM A234-WPB E45B Elbow 45 deg bw DN 25-150 ASTM A234-WPB E90B Elbow 90 deg bw DN 25-150 ASTM A234-WPB TEEB Tee equal bw DN 25-150 ASTM A234-WPB Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-40 ASTM A105N BNIB Branch fitting bw DN 25-40 ASTM A105N BROB Branch outlet bw DN 150-150 ASTM A105N RECB Reducer concentric bw DN 25-150 ASTM A234-WPB REEB Reducer eccentric bw DN 25-150 ASTM A234-WPB TERB Tee reducing bw DN 25-150 ASTM A234-WPB

PIPING CLASS – 091440U, Page 2 of 5 Valves Data Sheet No. BTFF VF.091440Z.22 Ball valve 14313 flgd DN 50-150 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PEEK BTRF VB.091440Z.22 Ball valve 14313 flgd DN 50-150 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PEEK CHVF VC.091440Z.21 Check valve (Piston lift type) DN 25-40 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 CHDF VC.091440Z.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GAVF VG.091440Z.21 Gate valve flgd DN 80-150 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GLVF VL.091440Z.21 Globe valve flgd DN 80-150 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 VDBT VDB.091440Z.21 Double block and bleed Valve DN 25-50 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PEEK Miscellaneous GKSW Gasket spiral wound DN 25-150 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 25-40 Alloy 400/ASTM A350 LF2 end flanges ORFS Orifice flange set DN 80-150 ASTM A105N

For DN 80-150 (900 Lbs) STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS -091440U, Page 3 of 5 Nominal pipe size 25 40 50 80 100 150 Item description MESC Pipe Pipe 743003 0401 0601 0731 1131 1591 2231 Flanges Blind flange 766210 4161 4181 4201 3221 3241 3261 Lapjoint flange 766220 9381 Spectacle blind 768837 1661 1681 1701 1321 1341 1361 Welding neck flange 766279 9661 9681 9701 8861 8641 8661 Fittings Cap bw 763017 5821 5921 6121 6321 6501 6701 Elbow 45 deg bw 763034 5821 5921 6121 6321 6501 6701 Elbow 90 deg bw 763042 5821 5921 6121 6321 6501 6701 Tee equal bw 763081 5821 5921 6121 6321 6501 6701 Valves Ball valve 14313 flgd 770067 7081 6601 6621 6641 Ball valve 14313 flgd 770067 1601 1621 1641 Check Valve (Piston lift type) NOTE 1 Check valve dual plate Lug type NOTE 1 Gate valve flgd 772004 1601 1621 1641 Globe valve flgd 773005 1601 1621 1641 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 2081 2121 2141 1681 1701 1741 Meterrun 766496 0861 0881 Orifice flange set 766295 3261 2431 2331 2341 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION




40 x 25 7630661911 7630671911 7630880891 50 x 25 7630662011 7630672011 7630881071 50 x 40 7630662111 7630672111 7630881161 80 x 40 7630662311 7630672311 80 x 50 7630662411 7630672411 7630881341

100 x 40 7630662561 7630672561 100 x 50 7630662701 7630672701 7630881611 100 x 80 7630662801 7630672801 7630881731 150 x 50 7679030021 150 x 80 7630663001 7630673001 7630881851 150 x 100 7630663091 7630673091 7630881911


PIPING CLASS -091440U, Page 4 of 5




BOLTING Boltset standard flange DN nr inch x mm MESC number 25 4 7/8 x 130 8138664031 40 4 1 x 140 8138664691 50 8 7/8 x 150 8138664061 80 8 7/8 x 150 8138664061 100 8 1 1/8 x 180 8138665331 150 12 1 1/8 x 200 8138665251 200 12 1 3/8 x 230 8138666441 Boltset meter run DN nr inch x mm MESC number 25 4 7/8 x 150 8138664061 40 4 1 x 160 8138664721 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 8138664071 80 8 7/8 x 160 8138664071 100 8 1 1/8 x 190 8138665351 150 12 1 1/8 x 210 8138665381

PIPING CLASS -091440U, Page 5 of 5

Boltset blind/spacer DN nr inch x mm MESC number 80 8 7/8 x 170 8138664091 100 8 1 1/8 x 200 8138665251 150 12 1 1/8 x 230 8138665411



CLASS 091441X Design limits Temperature (°C) 0 50 100 120 Pressure (Bar ga) DN 15- 250 142.7 141.2 139.8 137.9 DN 300- 600 139.6 139.6 139.6 137.9 Notes - Intended for drain,vent Gas ,Nitrogen & process oil services

Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).and ASME B31.3 allowable internal pressure, and limited by allowable stress of bolting material


when necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - - The use of dual plate check valves is considered most economical. Use swing check valves only

where fouling and abrasion are negatively affecting their functionality

Table of schedules

DN Schedule 15 160 20 160 25 160 40 160 50 160 80 160

100 120 150 120 200 120 250 120 300 100 350 100 400 100 450 100 500 100 600 100

PIPING CLASS – 091441X, Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600






Pipe Pipe

DN 15-350 DN-400-600

ASTM A106-B ASTM A333-6

Flanges BLFL Blind flange DN 15-600 ASTM A105N SBFL Spectacle blind DN 15-250 ASTM A516-60/65/70 SPFL Spade DN 200-600 ASTM A516-60/65/70 SPRT Spacer ring DN 200-600 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-600 ASTM A105N LJFL Lap Joint flange DN 40-40 ASTM A182 F316 Fittings CAPB CAPB

Cap bw Cap bw

DN 15-350 DN 400-600

ASTM A234-WPB ASTM A420-WPL6

E45B E45B


DN 15-350 DN 400-600


E90B E90B


DN 15-350 DN 400-600


TEEB TEEB


DN 15-350 DN 400-600


Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-50 ASTM A105N BNIB Branch fitting bw DN 15-40 ASTM A105N BROB BROB

Branch outlet bw Branch outlet bw

DN 150-350 DN 400-600

ASTM A105N ASTM A350-LF2 cl-1

RECB RECB


DN 20-350 DN 400-600


REEB REEB


DN 20-350 DN 400-600


TERB TERB


DN 15-350 DN 400-600


PIPING CLASS – 091441X, Page 2 of 5 Valves Data Sheet No. BTFF VF.091441X.21 BTRF VB.091441X.21


DN15-40 DN15-40

Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PEEK Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PEEK

BTFF VF.091441X.22 Ball valve 14313 flgd DN 50-350

Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PEEK

BTRF VB.091441X.22 Ball valve 14313 flgd DN 50-600



Body: ASTM A216-WCB/WCC Trim: Alloy 825, Stellite 6

CHVF VC.091441X.21 CHVF VC.091441X.22 CHSF VC.091441X.04

Check valve flgd (Piston lift type) Check valve dual plate Lug type Check Valve Swing

DN 15-40 DN 50-150 DN 50-150

Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 Body: ASTM A105/A216-WCB/WCC

Trim: Alloy 825, Stellite 6


Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6

GLVF VL.091441X.21

Globe valve flgd

DN 15-150


NDVF VN.091441X.21 Needle valve flgd DN 15-15 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6

VDBT VDB.091441X.21 Double block and bleed Valve DN 15-50

Body: ASTM A150 Trim: Alloy 825, PEEK




ASTM A105 For DN 50-50 (1500Lbs)

ST3B Strainer Y-type (3 mm ca) DN 50-350 Sieve: UNS S32750/S32760 STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM



PIPING COMPONENTS PIPING CLASS -091441X, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 Item description MESC Pipe Pipe 743003 0201 0301 0401 0601 0731 1131 1591 2231 2631 3031 3451 3931 NOTE 1 Flanges Blind flange 766210 4081 4121 4161 4181 4201 3221 3241 3261 3281 3301 3321 3341 NOTE 1 Spacer ring 768846 1381 1401 1421 1441 NOTE 1 Spade 768842 1381 1401 1421 1441 NOTE 1 Spectacle blind 768837 1621 1641 1661 1681 1701 1321 1341 1361 Welding neck flange 766279 9621 9641 9661 9681 9701 8861 8641 8661 8681 8701 8521 8541 NOTE 1 Lap joint flange Note1 Fittings Cap bw 763017 5721 5781 5821 5921 6121 6321 6501 6701 6911 7121 7341 7541 NOTE 1 Elbow 45 deg bw 763034 5721 5781 5821 5921 6121 6321 6501 6701 6911 7121 7341 7541 NOTE 1 Elbow 90 deg bw 763042 5721 5781 5821 5921 6121 6321 6501 6701 6911 7121 7341 7541 NOTE 1 Tee equal bw 763081 5721 5781 5821 5921 6121 6321 6501 6701 6911 7121 7341 7541 NOTE 1 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

770054 7031 7041 7051 7071 NOTE 1 770054 2031 2041 2051 2071 NOTE 1 770091 7081 6601 6621 6641 6651 6661 6671 6681 NOTE 1

Ball valve 14313 flgd 770091 1081 1601 1621 1641 1651 1661 1671 1681 NOTE 1 Check valve dual plate flgd 776714 1651 1661 1671 1681 NOTE 1 Check valve flgd Piston lift type NOTE 1 Check valve dual plate double flgd NOTE 1 Gate valve flgd 772053 2031 2041 2051 2071 2081 1601 1621 1641 1651 1661 1671 1681 NOTE 1 Globe valve flgd 773053 2031 2041 2051 2071 2081 1601 1621 1641 Double block and bleed Valve NOTE 1 Needle valve flgd NOTE 1 Miscellaneous Gasket spiral wound 854136 2041 2061 2081 2121 2141 1681 1701 1741 1761 1781 1801 1821 NOTE 1 Meterrun 766496 0821 0841 0861 0881 Orifice flange set 766295 3261 2431 2331 2341 2351 2361 2251 2261 NOTE 1 Strainers Note1 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION




20 x 15 7630661411 7630671411 7630880391 25 x 15 7630661511 7630671511 7630880491 25 x 20 7630661611 7630671611 7630880591 40 x 15 7630661711 7630671711 40 x 20 7630661811 7630671811 7630880791 40 x 25 7630661911 7630671911 7630880891 50 x 20 7630661951 7630671951 50 x 25 7630662011 7630672011 7630881071 50 x 40 7630662111 7630672111 7630881161 80 x 40 7630662311 7630672311 80 x 50 7630662411 7630672411 7630881341

100 x 40 7630662561 7630672561 100 x 50 7630662701 7630672701 7630881611 100 x 80 7630662801 7630672801 7630881731 150 x 50 7679030021 150 x 80 7630663001 7630673001 150 x 100 7630663091 7630673091 7630881911 200 x 50 7679030031 200 x 80 7679030161 200 x 100 7630663291 7630673291 7630882071 200 x 150 7630663391 7630673391 7630882271 250 x 50 7679030041 250 x 80 7679030171 250 x 100 7630663471 7630673471 7630882551 250 x 150 7630663591 7630673591 7630882731 250 x 200 7630663691 7630673691 7630882951 300 x 50 7679028021 300 x 80 7679028121 300 x 100 7679025321 300 x 150 7630663791 7630673791 7630883211 300 x 200 7630663931 7630673931 7630883411 300 x 250 7629475401 7629625401 7630883631 350 x 50 7679028031 350 x 80 7679028131 350 x 100 7679025331 350 x 150 7679025431 7629476081 7629626081 350 x 200 7630664291 7630674291 7630884051 350 x 250 7629476801 7629626801 7630884281 350 x 300 7630664481 7630674481 7630884441


. Run x Br BROB RECB REEB TERB 400 x 50 7679068041 400 x 80 7679068141 400 x 100 7679065341 400 x 150 7679065451 400 x 200 7679065541 7629458221 7629608221 400 x 250 7631665401 7631755401 7631885131 400 x 300 7631664771 7631754771 7631885341 400 x 350 7631664881 7631754881 7631885591 450 x 50 7679068051 450 x 80 7679068151 450 x 100 7679065351 450 x 150 7679065461 450 x 200 7679065551 450 x 250 7631665411 7631755411 7631886201 450 x 300 7631665571 7631755571 7631886311 450 x 350 7631665881 7631755881 7631886551 450 x 400 7631666181 7631756181 7631886791 500 x 50 7679068061 500 x 80 7679068161 500 x 100 7679065361 500 x 150 7679065471 500 x 200 7679065561 500 x 250 7679065641 7631887401 500 x 300 7631666471 7631756471 7631887511 500 x 350 7631666781 7631756781 7631887751 500 x 400 7631667081 7631757081 7631887991 500 x 450 7631667381 7631757381 7631888231 600 x 50 7679068081 600 x 80 7679068181 600 x 100 7679065381 600 x 150 7679065491 600 x 200 7679065581 600 x 250 7679065661 600 x 300 7631888711 600 x 350 7631888951 600 x 400 7631668881 7631758881 7631889191 600 x 450 7631669181 7631759181 7631889431 600 x 500 7631669581 7631759481 7631889671


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS -091441X, Page 4 of 5

BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 8138663301 20 4 3/4 x 120 8138663321 25 4 7/8 x 130 8138664031 40 4 1 x 140 8138664691 50 8 7/8 x 150 8138664061 80 8 7/8 x 150 8138664061 100 8 1 1/8 x 180 8138665331 150 12 1 1/8 x 200 8138665251 200 12 1 3/8 x 230 8138666441 250 16 1 3/8 x 240 8138666461 300 20 1 3/8 x 260 8138666491 350 20 1 1/2 x 280 8138666931 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 8138663371 20 4 3/4 x 150 8138663371 25 4 7/8 x 150 8138664061 40 4 1 x 160 8138664721 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 8138664071 80 8 7/8 x 160 8138664071 100 8 1 1/8 x 190 8138665351 150 12 1 1/8 x 210 8138665381 200 12 1 3/8 x 250 8138666471 250 16 1 3/8 x 260 8138666491 300 20 1 3/8 x 290 8138666541 350 20 1 1/2 x 310 8138666981

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 8138663321 20 4 3/4 x 130 8138663341 25 4 7/8 x 140 8138664041 40 4 1 x 160 8138664721 50 8 7/8 x 170 8138664091 80 8 7/8 x 170 8138664091 100 8 1 1/8 x 200 8138665251 150 12 1 1/8 x 230 8138665411 200 12 1 3/8 x 270 8138666621 250 16 1 3/8 x 290 8138666541 300 20 1 3/8 x 320 8138666591 350 20 1 1/2 x 340 8138667021

Branch Run pipe BNIF BNIP 15 40 - 350 7680373211 7680310161 20 50 - 50 7680373221 7680310171 20 80 - 150 7680373241 7680310191 20 200 - 350 7680373271 7680310211 25 80 - 250 7680373281 7680310221 25 300 - 350 7680373291 7680310231 40 80 - 80 7680373321 7680310251 40 100 - 200 7680373331 7680310271 40 250 - 350 7680373341 7680310291 50 80 - 350 Note1

PIPING CLASS -091441X, Page 5 of 5


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 091502Z Design limits Temperature (°C) -45 0 50 75 100 125 150 180 Pressure (Bar ga) DN 15- 200 142.7 142.7 142.7 141.2 139.8 137.5 135.2 132.9 Notes - -

Intended for process gas & vent gas services. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes). and ASME B31.3 allowable internal pressure, and limited by allowable stress of bolting material



The use of dual plate check valves is considered most economical. Use swing check valves only where fouling and abrasion are negatively affecting their functionality

Table of schedules

DN Schedule 15 160 20 160 25 160 40 160 50 160 80 160

100 120 150 200

120 120

PIPING CLASS – 091502Z, Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600



Carbon steel LT F-Gr Sour Plant Qusahwira Phase II FEED Class no. 091502Z Consignee ASME rating CLASS 900 Engineered by Snc Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395 ADCO DOC.NO.58.99.12.0603, APPENDIX 2

ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-200 ASTM A333-6 Flanges BLFL Blind flange DN 15-200 ASTM A350-LF2 LJFL Lap joint flange DN 40-40 ASTM A182 F316 SBFL Spectacle blind DN 15-150 ASTM A516-60/65/70 SPFL Spade DN 200-200 ASTM A516-60/65/70 SPRT Spacer ring DN 200-200 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-200 ASTM A350-LF2 Fittings CAPB Cap bw DN 15-200 ASTM A420-WPL6 E45B Elbow 45 deg bw DN 15-200 ASTM A420-WPL6 E90B Elbow 90 deg bw DN 15-200 ASTM A420-WPL6 TEEB Tee equal bw DN 15-200 ASTM A420-WPL6 Reducing fittings (Refer Branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-50 ASTM A350-LF2 BNIB Branch fitting bw DN 15-40 ASTM A350-LF2 BROB Branch outlet bw DN 150-200 ASTM A350-LF2 RECB Reducer concentric bw DN 20-200 ASTM A420-WPL6 REEB Reducer eccentric bw DN 20-200 ASTM A420-WPL6 TERB Tee reducing bw DN 20-200 ASTM A420-WPL6

PIPING CLASS – 091502Z, Page 2 of 5 Valves Data Sheet No. BAFF VF.091502Z.21 BARF VB.091502Z.21


DN 15-40 DN 15-40

Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, PEEK Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, PEEK

BTFF VF.091502Z.22 Ball valve 14313 FB (DN 50, 80) flgd

DN 50-200 Body: ASTM A350-LF2/A352-LCC

Trim: AISI 316, PEEK BTRF VB.091502Z.22 Ball valve 14313 FB (DN 50) flgd DN 50-200 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, PEEK CHVF VC.091502Z.21 Check valve flgd (Piston lift type) DN 15-40 Body: ASTM A350-LF2/A352-LCC CHDF VC.091502Z.22 CHDF VC.091502Z.23 CHSF VC.091502Z.24 CHNF VC.091502Z.25

Check valve dual plate Lug type Check valve dual plate double flgd Check Valve Swing Flgd Check Valve Non slam Flgd

DN 50-150 DN 200-200 DN 50-150 DN 50-150

Trim: AISI 316, Stellite 6 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6

GAVF VG.091502Z.21 Gate valve flgd DN 15-200 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 GLVF VL.091502Z.21 Globe valve flgd DN 15-150 Body: ASTM A350-LF2/A352-LCC

Trim: AISI 316, Stellite 6

NDVF VN.091502Z.21 Needle valve flgd DN 80-80 Body: ASTM A 350-LF2/A352-LCC Trim: AISI 316, Stellite 6

VDBT VDB.091502Z.21 Double block and bleed Valve DN 15-50 Body: ASTM A350-LF2 Trim: AISI 316, PEEK Miscellaneous GKSW Gasket spiral wound DN 15-200 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end

flanges ORFS Orifice flange set DN 50-200

ASTM A350-LF2 For DN 50 – 50 (1500lbs) For DN 80 & Above (900 lbs)




PIPING COMPONENTS PIPING CLASS -091502Z, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 Item description MESC Pipe Pipe 743016 0231 0301 0381 0541 0631 0711 0781 0871 1001 Flanges Blind flange 766212 6581 6621 6661 6681 6701 6221 6241 6261 6281 Spectacle blind 768835 6081 6121 6161 6181 6201 5221 5241 5261 5281 Welding neck flange 766286 6621 6641 6661 6681 6701 4721 4141 4161 4181 Lap joint flange Note1 Fittings Cap bw 763117 1721 1781 1821 1921 2121 2321 2501 2701 2911 Elbow 45 deg bw 763134 1721 1781 1821 1921 2121 2321 2501 2701 2911 Elbow 90 deg bw 763143 1721 1781 1821 1921 2121 2321 2501 2701 2911 Tee equal bw 763180 1721 1781 1821 1921 2121 2321 2501 2701 2911 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

770031 7031 7041 7051 7071 770031 2031 2041 2051 2071 770077 7081 6601 6621 6641 6651

Ball valve 14313 flgd 770077 1081 1601 1621 1641 1651 Check valve dual plate Lug type NOTE 1 Check valve flgd Piston lift type NOTE 1 Check valve dual plate double flgd 776720 1651 Gate valve flgd 772033 2031 2041 2051 2071 Gate valve flgd 772041 5081 4601 4621 4641 4651 Globe valve flgd 773033 2031 2041 2051 2071 8081 7601 7621 7641 Double block and bleed Valve Please refer respective valve data sheet no. Specified on sheet no 2 of 5.of piping class 091502Z Miscellaneous Gasket spiral wound 854136 2041 2061 2081 2121 2141 1681 1701 1741 1761 Meterrun 766496 0821 0841 0861 0881 Orifice flange set 766297 3271 2361 2261 2271 2281 NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL. 9.12OF THIS SPECIFICATION


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING/PIPING COMPONENT Run x Br BROB RECB REEB TERB

20 x 15 7631661411 7631751411 7631880391 25 x 15 7631661511 7631751511 7631880491 25 x 20 7631661611 7631751611 7631880591 40 x 15 7631661711 7631751711 40 x 20 7631661811 7631751811 7631880791 40 x 25 7631661911 7631751911 7631880891 50 x 20 7631661951 7631751951 50 x 25 7631662011 7631752011 7631881071 50 x 40 7631662111 7631752111 7631881161 80 x 40 7631662311 7631752311 80 x 50 7631662411 7631752411 7631881341

100 x 40 7631662541 7631752541 100 x 50 7631662701 7631752701 7631881611 100 x 80 7631662801 7631752801 7631881731 150 x 50 7679070021 150 x 80 7631663001 7631753001 7631881851 150 x 100 7631663091 7631753091 7631881911 200 x 50 7679070031 200 x 80 7679070161 200 x 100 7631663291 7631753291 7631882071 200 x 150 7631663391 7631753391 7631882271



Branch Run pipe BNIF BNIP 15 40 - 200 7680378211 7680311161 20 50 - 50 7680378221 7680311121 20 80 - 150 7680378241 7680311001 20 200 - 200 7680378271 7680310991 25 80 - 200 7680378281 7680310971 40 80 - 80 7680378321 7680310931 40 100 - 200 7680378331 7680310911 50 80 - 200 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 8138673301 20 4 3/4 x 120 8138673321 25 4 7/8 x 130 8138674031 40 4 1 x 140 8138674691 50 8 7/8 x 150 8138674061 80 8 7/8 x 150 8138674061 100 8 1 1/8 x 180 8138675331 150 12 1 1/8 x 200 8138675441 200 12 1 3/8 x 230 8138676441 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 8138673371 20 4 3/4 x 150 8138673371 25 4 7/8 x 150 8138674061 40 4 1 x 160 8138674721 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 8138674071 80 8 7/8 x 160 8138674071 100 8 1 1/8 x 190 8138675351 150 12 1 1/8 x 210 8138675381 200 12 1 3/8 x 250 8138676471

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 8138673321 20 4 3/4 x 130 8138673341 25 4 7/8 x 140 8138674041 40 4 1 x 160 8138674721 50 8 7/8 x 170 8138674091 80 8 7/8 x 170 8138674091 100 8 1 1/8 x 200 8138675441 150 12 1 1/8 x 230 8138675411 200 12 1 3/8 x 270 8138676521




CLASS 093411Z Design limits Temperature (°C) -20

0 50 75 100 125

Pressure (Bar ga) DN 15-50

148.9 148.9 144.3 135.4 126.6 121

Notes - -

Intended for Bactericide, Corrossion Inhibitor, Oxygen Scavenger Services Design limits acc. to ASME B16.5 flange rating mat. grp 2.2. (ASME B16.5 up to DN 600 and B16.47 for larger sizes).





The use of dual plate check valves is considered most economical. Use gate valves only where fouling and abrasion are negatively affecting their functionality

Table of schedules

DN Schedule 15 40S 20 40S 25 40

40S 40S

50 80S

PIPING CLASS – 093411Z, Page 1 of 5 Branch connections 90 degrees Branch Size

Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600



Stainl steel AISI 316L Plant Qusahwira Phase II FEED Class no. 093411Z Consignee ASME rating CLASS 900 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395 ADCO DOC.NO.58.99.12.0603, APPENDIX 2

ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-50 ASTM A312-TP316L Flanges BLFL Blind flange DN 15-50 ASTM A182-F316 SBFL Spectacle blind DN 15-50 ASTM A240-GR 316 WNFL Welding neck flange DN 15-50 ASTM A182-F316 Fittings CAPB Cap bw DN 15-50 ASTM A403-WP316L E45B Elbow 45 deg bw DN 15-50 ASTM A403-WP316L E90B Elbow 90 deg bw DN 15-50 ASTM A403-WP316L TEEB Tee equal bw DN 15-50 ASTM A403-WP316L Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A182-F316 RECB Reducer concentric bw DN 20-50 ASTM A403-WP316L REEB Reducer eccentric bw DN 20-50 ASTM A403-WP316L TERB Tee reducing bw DN 20-50

ASTM A403-WP316L

PIPING CLASS – 093411Z, Page 2 of 5 Valves Data Sheet No. BTFF VF.093411Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182-F316L/A351-CF8M Trim: AISI 316, devlon V BTRF VB.093411Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182-F316L/A351-CF8M Trim: AISI 316, devlon V BTFF VF.093411Z.22 Ball valve 14313 flgd DN 50-50 Body: ASTM A182-F316L/A351-CF8M BTRF VB.093411Z.22


DN 50-50

Trim: AISI 316, devlon V Body: ASTM A182-F316L/A351-CF8M Trim: AISI 316, devlon V

CHVF VC.093411Z.21 CHWF VC.093411Z.22

Check valve flgd (Piston lift type) Check valve dual plate Lug type

DN 15-40 DN 50-50

Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6



GLVF VL.093411Z.21 Globe valve flgd DN 15-50


VDBT VDB.093411Z.21 Double block and bleed Valve DN 15-40

Body: ASTM A182-F316 Trim: AISI 316, Devlon V


AISI 316, graphite filled CS centring-/SS inner ring For DN 15-50 (1500 Lbs)

MTRR Meterrun DN 15-25 Alloy 400/AISI 316 end flanges STBT Studbolt with nuts --- ASTM A193-B7/A194-2H



PIPING COMPONENTS PIPING CLASS – 093411Z, Page 3 of 5 Nominal pipe size 15 20 25 40 50 Item description MESC Pipe Pipe 743633 0181 0261 0341 0501 0601 Flanges Blind flange 766510 5001 5011 5021 5031 5041 Spectacle blind 768810 5081 5121 5161 4681 4701 Welding neck flange 766580 5821 5841 5861 5881 6091 Fittings Cap bw 763319 2861 2961 3061 3261 3381 Elbow 45 deg bw 763337 2861 2961 3061 3261 3381 Elbow 90 deg bw 763341 2861 2961 3061 3261 3381 Tee equal bw 763384 7861 7961 8061 8261 8381 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd Ball valve 14313 flgd Check valve dual plate Lug type Check valve flgd Piston lift type

770326 7031 7041 7051 7071 770326 2031 2041 2051 2071 770349 7081 770349 1081 NOTE 1 NOTE 1

Gate valve flgd 772303 2031 2041 2051 2071 Globe valve flgd 773303 2031 2041 2051 2071 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 2041 2061 2081 2121 2141 Meterrun 766496 0321 0341 0361 NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL. 9.12OF THIS SPECIFICATION




20 x 15 7633705661 7633725661 7633856181 25 x 15 7633705761 7633725761 7633856281 25 x 20 7633705861 7633725861 7633856381 40 x 15 7633705961 7633725961 40 x 20 7633706161 7633726161 7633856481 40 x 25 7633706261 7633726261 7633856581 50 x 20 7636501021 7636631021 50 x 25 7633706411 7633726411 7633856771 50 x 40 7633706511 7633726511 7633856871


PIPING CLASS – 093411Z, Page 4 of 5 Branch Run pipe BNIF BNIP

15 40 - 40 7680394521 7680315821 15 50 - 50 7680394531 7680315831 20 50 - 50 7680394561 7680315861


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 8138613301 20 4 3/4 x 120 8138613321 25 4 7/8 x 130 8138614031 40 4 1 x 140 8138614691 50 8 7/8 x 150 8138614061 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 8138613371 20 4 3/4 x 150 8138613371 25 4 7/8 x 150 8138614061 40 4 1 x 160 8138614721 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 8138614071


Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 8138613321 20 4 3/4 x 130 8138613341 25 4 7/8 x 140 8138614041 40 4 1 x 160 8138614721 50 8 7/8 x 170 8138614091



CLASS 093451Z Design limits Temperature (°C) -101 0 50 75 100 150 180 Pressure (Bar ga) DN 15- 350 148.9 148.9 144.3 135.4 126.6 115.5 109.2 Notes -

Intended for Hydrocarbon condensate, Vent gas , Bactericide , Corrossion Inhibitor, Oxygen Scavenger & process gas service. Design limits acc. to ASME B16.5 flange rating mat. grp 2.2 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).


degr. C in saliferous atmospheres to prevent chloride stress corrosion cracking - When chlorides are present in the process fluid in conjunction with free oxygen, the max.



The use of triple eccentric butterfly valves is considered most economical. Use gate valves only where fouling and abrasion are negatively affecting their functionality

Table of schedules


100 80S 150 120 200 250

120 120

300 120 350 120


15 20 25 40 50 80 100 150 200 250 300 350

350 C C C C E E E E B B B A 300 C C C C E E E B B B A 250 200

C C

C C

C C

C C

E E

E E

B B

B B

B A

A

150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A


Stainl steel AISI 316 LT Sour Plant Qusahwira Phase II FEED Class no. 093451Z Consignee ASME rating CLASS 900 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395 ADCO DOC.NO.58.99.12.0603, APPENDIX 2


COMPONENT MATERIAL DESCRIPTION

(For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-300 ASTM A312-TP316L PIPE Pipe DN 350-350 ASTM A358 GR 316L CL1 Flanges BLFL Blind flange DN 15-350 ASTM A182-F316 LJFL Lap joint flange DN 40-40 ASTM A182-F316 SBFL Spectacle blind DN 15-150 ASTM A240-TP316 SPFL Spade DN 200 -350 ASTM A240-TP316 SPRT Spacer ring DN 200 -350 ASTM A240-TP316 WNFL Welding neck flange DN 15-350 ASTM A182-F316 Fittings CAPB Cap bw DN 15-350 ASTM A403-WP316L E45B Elbow 45 deg bw DN 15-300 ASTM A403-WP316L E45B Elbow 45 deg bw DN 350-350 ASTM A403-WP316L-W E90B Elbow 90 deg bw DN 15-300 ASTM A403-WP316L E90B Elbow 90 deg bw DN 350-350 ASTM A403-WP316L-W TEEB Tee equal bw DN 15-300 ASTM A403-WP316L TEEB Tee equal bw DN 350-350 ASTM A403-WP316L-W Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-40 ASTM A182-F316 BNIB Branch fitting bw DN 15-40 ASTM A182-F316 BROB Branch outlet bw DN 150-350 ASTM A182-F316 RECB Reducer concentric bw DN 20-300 ASTM A403-WP316L RECB Reducer concentric bw DN 350-350 ASTM A403-WP316L-W REEB Reducer eccentric bw DN 20-300 ASTM A403-WP316L REEB Reducer eccentric bw DN 350-350 ASTM A403-WP316L-W TERB Tee reducing bw DN 20-300 ASTM A403-WP316L TERB Tee reducing bw DN 350-350 ASTM A403-WP316L-W

PIPING CLASS – 093451Z, Page 2 of 5 Valves Data Sheet No. BAFF VF.093451Z.21 BARF VB.093451Z.21


DN 15-40 DN 15-40

Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK

BTFF VF.093451Z.22 Ball valve 14313 flgd DN 50-350 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK BTRF VB.093451Z.22 Ball valve 14313 flgd DN 50-350 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK CHVF VC.093451Z.21 Check valve flgd (Piston lift type) DN 15-40 Body: ASTM A182-F316/A351-CF8M CHDF VC.093451Z.22 CHDF VC.093451Z.23

Check valve dual plate Lug type Check valve dual plate flgd type

DN 50-150 DN 200-350

Trim: AISI 316, Stellite 6 Body: ASTM A351-CF8M Trim: AISI 316, Stellite 6 Body: ASTM A351-CF8M Trim: AISI 316, Stellite 6

GAVF VG.093451Z.21 Gate valve flgd DN 15-350 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 GLVF VL.093451Z.21 Globe valve flgd DN 15-150 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 VDBT VDB.093451Z.21 Double block and bleed Valve DN 15-50 Body: ASTM A182-F316 Trim: AISI 316, PEEK Miscellaneous GKSW Gasket spiral wound DN 15-350 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/AISI 316 end flanges ORFS Orifice flange set DN 50-350 ASTM A182-F316

For DN 50 (1500 lbs) For DN 80-250 (900 lbs)

STBT Studbolt with nuts --- ASTM A320-B8M/A194-8MA



PIPING COMPONENTS

Nominal pipe size PIPING CLASS – 093451Z, REV 2, PAGE 3 OF 5

15 20 25 40 50 80 100 150 200 250 300 350 Item description MESC Pipe Pipe 743633 0181 0261 0341 0501 0601 0681 0761 0871 0991 1111 1231 Note1 Flanges Blind flange 766510 5001 5011 5021 5031 5041 4891 4901 4911 4921 4931 4941 4951 Spacer ring 768819 5781 5801 5821 5831 Spade 768843 3881 4801 3921 3941 Spectacle blind 768810 4581 4621 4661 4681 4701 4721 4741 4761 Welding neck flange 766580 5821 5841 5861 5881 6091 5721 5741 5801 5791 6421 6441 Note1 Lapjoint flange 766520 Note1 Fittings Cap bw 763319 2861 2961 3061 3261 3381 3581 3781 3981 4121 4271 4431 4561 Elbow 45 deg bw 763337 2861 2961 3061 3261 3381 3581 3781 3981 4121 4281 4441 4561 Elbow 90 deg bw 763341 2861 2961 3061 3261 3381 3581 3781 3981 4121 4281 4441 4561 Tee equal bw 763384 7861 7961 8061 8261 8381 8581 8781 8981 9121 9281 9401 9551 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

770325 7031 7041 7051 7071 770325 2031 2041 2051 2071 770373 7081 6601 6621 6641 6651 6661 6671 6681 770373 1081 1601 1621 1641 1651 1661 1671 1681 776813 1651 1661 1671 1681 NOTE 1 NOTE 1 772305 2031 2041 2051 2071 2081 1601 1621 1641 1651 1661 1671 1681 773305 2031 2041 2051 2071 2081 1601 1621 1641 NOTE 1

Ball valve 14313 flgd Check valve dual plate double flgd Check valve dual plate Lug type Check valve flgd Piston lift type Gate valve flgd Globe valve flgd Double block and bleed Valve Miscellaneous Gasket spiral wound 854136 2041 2061 2081 2121 2141 1681 1701 1741 1761 1781 1801 1821 Meterrun 766496 0321 0341 0361 0381 Orifice flange set 766592 7131 6221 6231 6431 6451 6471 6491 Note1 NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL. 9.12 OF THIS SPECIFICATION




20 x 15 7633705661 7633725661 7633856181 25 x 15 7633705761 7633725761 7633856281 25 x 20 7633705861 7633725861 7633856381 40 x 15 7633705961 7633725961 40 x 20 7633706161 7633726161 7633856481 40 x 25 7633706261 7633726261 7633856581 50 x 20 7636501021 7636631021 50 x 25 7633706411 7633726411 7633856771 50 x 40 7633706511 7633726511 7633856871 80 x 40 7633706811 7633726811 80 x 50 7633706881 7633726881 7633893561

100 x 40 7633707011 7633727011 100 x 50 7633707081 7633727081 7633893721 100 x 80 7633707181 7633727181 7633893801 150 x 50 7679704881 150 x 80 7633707511 7633727511 7633893891 150 x 100 7633707611 7633727611 7633893971 200 x 50 7679704901 200 x 80 7679705141 200 x 100 7633707701 7633727701 7633894051 200 x 150 7633707841 7633727841 7633894151 250 x 50 7679704921 250 x 80 7679705161 250 x 100 7633894191 250 x 150 7633707971 7633727971 7633894241 250 x 200 7633708121 7633728121 7633894291 300 x 50 7679704941 300 x 80 7679705181 300 x 100 7679705401 300 x 150 7633708211 7633728211 7633894341 300 x 200 7633708321 7633728321 7633894391 300 x 250 7633708471 7633728471 7633894441 350 x 50 Note 1 350 x 80 Note 1 350 x 100 Note 1 350 x 150 Note 1 Note 1 Note 1 350 x 200 Note 1 Note 1 Note 1 350 x 250 Note 1 Note 1 Note 1 350 x 300 Note 1 Note 1 Note 1


.


Branch Run pipe BNIF BNIP 15 40 - 40 7680394521 Note1 15 50 - 50 7680394531 Note1 15 80 - 200 7680394541 Note1 15 250 - 350 7680394551 Note1 20 50 - 50 7680394561 Note1 20 80 - 100 7680394571 Note1 20 150 - 300 7680394581 Note1 20 350 - 350 7680394591 Npte1 25 80 - 80 7680394601 Note1 25 100 - 100 7680394611 Note1 25 150 - 250 7680394621 Note1 25 300 - 350 7680394631 Note1 40 80 - 80 7680394641 Note1 40 100 - 100 7680394651 Note1 40 150 - 150 7680394661 Note1 40 200 - 300 7680394681 Note1 40 350 - 350 Note1 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 Note1 20 4 3/4 x 120 Note1 25 4 7/8 x 130 Note1 40 4 1 x 140 Note1 50 8 7/8 x 150 Note1 80 8 7/8 x 150 Note1 100 8 1 1/8 x 180 Note1 150 12 1 1/8 x 200 Note1 200 12 1 3/8 x 230 Note1 250 16 1 3/8 x 240 Note1 300 20 1 3/8 x 260 Note1 350 20 1 1/2 x 280 Note1 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 Note1 20 4 3/4 x 150 Note1 25 4 7/8 x 150 Note1 40 4 1 x 160 Note1 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 Note1 80 8 7/8 x 160 Note1 100 8 1 1/8 x 190 Note1 150 12 1 1/8 x 210 Note1 200 12 1 3/8 x 250 Note1 250 16 1 3/8 x 260 Note1 300 20 1 3/8 x 290 Note1 350 20 1 1/2 x 310 Note1

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 Note1 20 4 3/4 x 130 Note1 25 4 7/8 x 140 Note1 40 4 1 x 160 Note1 50 8 7/8 x 170 Note1 80 8 7/8 x 170 Note1 100 8 1 1/8 x 200 Note1 150 12 1 1/8 x 230 Note1 200 12 1 3/8 x 270 Note1 250 16 1 3/8 x 290 Note1 300 20 1 3/8 x 320 Note1 350 20 1 1/2 x 340 Note1



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 098220X Design limits Temperature (°C) -29 0 50 75 100 125 150 180 Pressure (Bar ga) DN 15-100

155.1

155.1

155.1

153.5

152.0

144.9 137.8 131.9

Notes - -

Intended for process drain and Drain service Design limits acc. to ASME B16.5 flange rating mat. grp 2.8 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).


when necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - - -

The use of dual plate check valves is considered most economical. Use swing check valves only where fouling and abrasion are negatively affecting their functionality ASTM A995 Gr.5A to be used for casting of SDSS valves as pressure containing part. ASTM A928 CL.1 can be used as a substitue for ASTM A790 UNS S32750( WELDED)

Table of schedules


100 40S


15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600





ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-100 ASTM A790-UNS S32750 Flanges BLFL Blind flange DN 15-50 ASTM A182 Grade F53 LJFL Lap joint flang DN 40-40 ASTM A182 Grade F53 SBFL Spectacle blind DN 15-50 ASTM A182 Grade F53 WNFL Welding neck flange DN 15-50 ASTM A182 Grade F53 Fittings CAPB Cap bw DN 15-50 ASTM A815 Grade WPS32750 E45B Elbow 45 deg bw DN 15-50 ASTM A815 Grade WPS32750 E90B Elbow 90 deg bw DN 15-50 ASTM A815 Grade WPS32750 TEEB Tee equal bw DN 15-50 ASTM A815 Grade WPS32750 Reducing fittings (Refer branch table for all size range of reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A182 Grade F53 RECB Reducer concentric bw DN 20-100 ASTM A815 Grade WPS32750 REEB Reducer eccentric bw DN 20-100 ASTM A815 Grade WPS32750 TERB BNIF


DN 20-50 DN 25-40

ASTM A815 Grade WPS32750 ASTM A182 Grade F53

PIPING CLASS – 098220X, Page 2 of 5 Valves Data Sheet No. BAFF VF.098220X.21 BAFF VF.098220X.22


DN 15-40 DN 50-50

Body: ASTM A182-F53/A995 Grade 5A Trim: UNS37250, PEEK Body: ASTM A182-F53/A995 Grade 5A Trim: UNS37250, PEEK

BARF VB.098220X.21 BARF VB.098220X.22


DN 15-40 DN 50-50


CHDF VC.098220X.22 Check valve dual plate Lug type DN 50-50

Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6





GLVF VL.098220X.21

Globe valve flgd DN 15-50 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6


Body: ASTM A182-F53 Trim: UNS37250, PEEK


Super Duplex SS, graphite filled CS centring-/Super Duplex SS inner ring

MTRR Meterrun DN 15-40 UNS32750 ORFS Orifice flange set DN 50-50

ASTM A182-F53 For DN 50-50 (1500Lbs)




PIPING COMPONENTS PIPING CLASS – 098220X, PAGE 3 OF 5 Nominal pipe size 15 20 25 40 50 80 100 Item description MESC Pipe Pipe ----------------------Note 1---------------------------- Flanges Blind flange --------------Note 1-------------

--------------Note 1------------- --------------Note 1-------------

Spectacle blind Welding neck flange Lapjoint flange Note 1 Fittings Cap bw -------------Note 1--------------

-------------Note 1-------------- -------------Note 1-------------- -------------Note 1--------------

Elbow 45 deg bw Elbow 90 deg bw Tee equal bw Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

NOTE 1

Ball valve 14313 flgd Check valve dual plate Lug type Check valve flgd Piston lift type Gate valve flgd Globe valve flgd Double block and bleed Valve Miscellaneous Gasket spiral wound -------------Note 1--------------

-------------Note 1-------------- Note 1

Meterrun Orifice flange set NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL. 9.12 OF THIS SPECIFICATION .



20 x 15 -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1----------------------------- -----------------------------------Note 1-----------------------------

25 x 15 25 x 20 40 x 15 40 x 20 40 x 25 50 x 20 50 x 25 50 x 40

100 x 40 100 x 50 100 x 80

Comp.name Description BNIF Branch fitting flgd BNIP Branch fitting plain BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CLAUSE 8.12 OF THIS SPECIFICATION


Branch Run pipe BNIF BNIP 15 40 - 40 -------------Note 1-----------

-------------Note 1----------- -------------Note 1----------- -------------Note 1-----------

15 50 - 50 20 50 - 50 40 100 - 100


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 Note 1 20 4 3/4 x 120 Note 1 25 4 7/8 x 130 Note 1 40 4 1 x 140 Note 1 50 8 7/8 x 150 Note 1 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 Note 1 20 4 3/4 x 150 Note 1 25 4 7/8 x 150 Note 1 40 4 1 x 160 Note 1 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 Note 1

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 Note 1 20 4 3/4 x 130 Note 1 25 4 7/8 x 140 Note 1 40 4 1 x 160 Note 1 50 8 7/8 x 170 Note 1




CLASS 151440Y Design limits

Temperature (°C) 0 4 50 100 Pressure (Bar ga) DN 15-200 219.5 219.5 219.5 219.5 Notes - -

Intended for injection water services Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes), and limited by allowable stress of bolting material


when necessary for process/operating requirements -

Piston type check valves (DN 15-40) for horizontal mounting only

Table of schedules

DN Schedule 15 9 mm 20 9.14 mm 25 10 mm 40 11 mm 50 12 mm 80 XXS

100 18 mm 150 23 mm 200 28 mm

PIPING CLASS – 151440Y, Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200





COMPONENT MATERIAL DESCRIPTION

(For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-150 ASTM A106-B PIPE Pipe DN 200-200 ASTM A333-6 Flanges BLFL Blind flange DN 15-200 ASTM A105N LJFL Lap joint flange DN 50-50 ASTM A182 F316 SBFL Spectacle blind DN 15-150 ASTM A516-60/65/70 SPFL Spade DN200-200 ASTM A516-60/65/70 SPRT Spacer ring DN 200-200 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-200 ASTM A105N Fittings CAPB Cap bw DN 15-150 ASTM A234-WPB CAPB Cap bw DN 200-200 ASTM A420-WPL6 E45B Elbow 45 deg bw DN 15-150 ASTM A234-WPB E45B Elbow 45 deg bw DN 200-200 ASTM A420-WPL6 E90B Elbow 90 deg bw DN 15-150 ASTM A234-WPB E90B Elbow 90 deg bw DN 200-200 ASTM A420-WPL6 TEEB Tee equal bw DN 15-150 ASTM A234-WPB TEEB Tee equal bw DN 200-200 ASTM A420-WPL6 Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A105N BNIF Branch fitting flgd DN 50-50 ASTM A105N BROB Branch outlet bw DN 150-200 ASTM A105N RECB Reducer concentric bw DN20-150 ASTM A234-WPB RECB Reducer concentric bw DN 200-200 ASTM A420-WPL6 REEB Reducer eccentric bw DN 20-150 ASTM A234-WPB REEB Reducer eccentric bw DN 200-200 ASTM A420-WPL6 TERB Tee reducing bw DN 20-150 ASTM A234-WPB TERB Tee reducing bw DN 200-200 ASTM A420-WPL6

PIPING CLASS – 151440Y, Page 2 of 5 Valves Data Sheet No. BTFF VF.151440Y.22 Ball valve 14313 flgd DN 50-200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PEEK BTRF VB.151440Y.22 Ball valve 14313 FB (DN 25) flgd DN 50-200 Body: ASTM A105N/A216-WCB/WCC BAFF VF.151440Y.21 BARF VB.151440Y.21


DN 15-40 DN 15-40

Trim: Super Duplex, PEEK Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PEEK Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, PEEK

CHVF VC.151440Y.21 Check valve (piston type) DN 15-40 Body: ASTM A105N/A216-WCB/WCC CHDF VC.151440Y.22

CHDF VC.151440Y.23

Check valve dual plate Lug type Check valve dual plate double flanged

DN 50-150 DN 200-200

Trim: Super Duplex, Stellite 6 Body:ASTM A105N/A216-WCB/WCC Trim:Super Duplex, Stellite 6 Body:ASTM A105N/A216-WCB/WCC Trim:Super Duplex, Stellite 6

CHSF VC.151440Y.24 Check valve swing type flanged DN 50-200 Body:ASTM A105N/A216-WCB/WCC Trim:Super Duplex, Stellite 6

GAVF VG.151440Y.21 Gate valve flgd DN 15-200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GLVF VL.151440Y.21 Globe valve flgd DN 15-200 Body: ASTM A105N/A216-WCB/WCC Trim: Super Duplex, Stellite 6 VDBT VDB.151440Y.21 Double block and bleed Valve DN15-50 Body: ASTM A350-LF2 Trim: Super Duplex, PEEK Miscellaneous GKSW Gasket spiral wound DN 15-200 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-200 Alloy 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-200 ASTM A105N STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM ST3B Strainer Y-type (3 mm ca) DN 50-350 Sieve: UNS S32750/S32760

Carbon steel Sour Plant Qusahwira Phase II FEED Class no. 151440Y Consignee ASME rating CLASS 1500 Engineered by Snc Lavalin International Corrosion allowance 6 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395





PIPING COMPONENTS PIPING CLASS – 151440Y, PAGE 3 OF 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 Item description MESC Pipe Pipe 743003 <------ -------- Note1 -------- ---- 1151 <----- Note1 ---- Flanges Blind flange 766210 4081 4121 4161 4181 4201 4221 4241 4261 4281 Spectacle blind 768837 1621 NOTE2 1661 1681 1701 1721 1741 1761 Spacer ring 768846 1781 Spade 768842 1781 Welding neck flange Welding neck flange

766279 766280

0321

NOTE2

0361

0381

0401

0441

<----- Note1 ---

Lap Joint flange 766520 8131 Fittings Cap bw 763017 <------ -------- Note1 -------- ---- 6331 <------ Note1 ---- Cap bw Elbow 45 deg bw 763034 <------ -------- Note1 -------- ---- 6331 <------ Note1 ---- Elbow 45 deg bw Elbow 90 deg bw 763042 <------ -------- Note1 -------- ---- 6331 <------ Note1 ---- Elbow 90 deg bw Tee equal bw 763081 <------ -------- Note1 -------- -----> 6331 <------ Note1 ---- Tee equal bw Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

770025 7031 7041 7051 7071 770025 2031 2041 2051 2071 770067 7081 7101 7121 7141 7151

Ball valve 14313 flgd 770067 2081 2101 2121 2141 2151 Check valve dual plate double flgd Check valve dual plate Lug type Check valve flgd Piston lift type Check valve swing type flanged

NOTE 1 NOTE 1 NOTE 1 NOTE 1

Gate valve flgd 772004 2031 2041 2051 2071 2081 2101 2121 2141 2151 Globe valve flgd Double block and bleed Valve

773005 2031 2041 2051 2071 2081 2101 2121 2141 2151 NOTE 1

Miscellaneous Gasket spiral wound 854136 2041 2061 2081 2121 2141 2181 2201 2241 2261 Meterrun 766496 0821 0841 0861 0881 Orifice flange set 766295 Note1 3391 <------ NOTE1---- STRAINERS

<------ NOTE1-----------------------

NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL. 9.12OF THIS SPECIFICATION



20 x 15 Note1 Note1 Note1 25 x 15 Note1 Note1 Note1 25 x 20 Note1 Note1 Note1 40 x 15 Note1 Note1 40 x 20 Note1 Note1 Note1 40 x 25 Note1 Note1 Note1 50 x 20 Note1 Note1 50 x 25 Note1 Note1 Note1 50 x 40 Note1 Note1 Note1 80 x 40 Note1 Note1 80 x 50 Note1 Note1 Note1

100 x 40 Note1 Note1 100 x 50 Note1 Note1 Note1 100 x 80 Note1 Note1 Note1 150 x 50 150 x 80 Note1 Note1 Note1 150 x 100 Note1 Note1 Note1 200 x 50 200 x 80 200 x 100 Note1 Note1 Note1 200 x 150 Note1 Note1 Note1

Comp.name Description BNIB Branch fitting bw BNIF Branch fitting flgd BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw .


Branch Run pipe BNIB BNIF 15 40 - 600 Note1 20 50 - 50 Note1 20 80 - 150 Note1 20 200 - 600 Note1 25 80 - 250 Note1 25 300 - 600 Note1 40 80 - 80 Note1 Note1 40 100 - 200 Note1 Note1 50 100 - 200 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTINGBoltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 8138663301 20 4 3/4 x 120 8138663321 25 4 7/8 x 130 8138664031 40 4 1 x 140 8138664691 50 8 7/8 x 150 8138664061 80 8 1 1/8 x 180 8138665331 100 8 1 1/4 x 200 8138665881 150 12 1 3/8 x 260 8138666491 200 12 1 5/8 x 340 8138667321 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 8138663371 20 4 3/4 x 150 8138663371 25 4 7/8 x 150 8138664061 40 4 1 x 160 8138664721 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 8138664071 80 8 1 1/8 x 190 8138665351 100 8 1 1/4 x 210 8138665951 150 12 1 3/8 x 280 8138666521 200 12 1 5/8 x 360 8138667361

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 8138663321 20 4 3/4 x 130 8138663341 25 4 7/8 x 140 8138664041 40 4 1 x 160 8138664721 50 8 7/8 x 170 8138664091 80 8 1 1/8 x 210 8138665381 100 8 1 1/4 x 230 8138665981 150 12 1 3/8 x 300 8138666551 200 12 1 5/8 x 390 8138667401




CLASS 151441X Design limits Temperature (°C) 0 50 75 100 120 Pressure (Bar ga) DN 15-500

219.5 219.5 219.5 219.5 219.5

Notes - -

Intended for Process oil, Vent gas & Nitrogen services. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1, (ASME B16.5 up to DN 600 and B16.47 for larger sizes). and limited by allowable stress of bolting material


when necessary for process/operating requirements - - -

Piston type check valves (DN 15-40) for horizontal mounting only Pipe and wrought fittings material for size upto DN 200 is used as A106-B and A234-WPB respectively wrt TB-10 PI-7.

Table of schedules

DN Schedule 15 XXS 20 XXS 25 XXS 40 XXS 50 XXS 80 XXS

100 160 150 160 200 160 250 160 300 160 350 160 400 160 450 500

160 160


15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600





ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-200 ASTM A106-B PIPE

Pipe

DN 250 -500

ASTM A333-6

Flanges BLFL Blind flange DN 15-500 ASTM A105N LJFL Lap joint flange DN 50-50 ASTM A182 F316 SBFL Spectacle blind DN 15-150 ASTM A516-60/65/70 SPFL Spade DN 200 -500 ASTM A516-60/65/70 SPRT Spacer ring DN 200 -500 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-500 ASTM A105N Fittings CAPB Cap bw DN 15-200 ASTM A234-WPB CAPB Cap bw DN 250 -500 ASTM A420-WPL6 E45B Elbow 45 deg bw DN 15-200 ASTM A234-WPB E45B Elbow 45 deg bw DN 250 -500 ASTM A420-WPL6 E90B Elbow 90 deg bw DN 15-200 ASTM A234-WPB E90B Elbow 90 deg bw DN 250 -500 ASTM A420-WPL6 TEEB Tee equal bw DN 15-200 ASTM A234-WPB TEEB

Tee equal bw

DN 250 -500

ASTM A420-WPL6

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A105N BNIF Branch fitting flgd DN 50-50 ASTM A105N BROB Branch outlet bw DN 150-500 ASTM A105N RECB Reducer concentric bw DN 20 -200 ASTM A234-WPB RECB Reducer concentric bw DN 250 -500 ASTM A420-WPL6 REEB Reducer eccentric bw DN 20 -200 ASTM A234-WPB REEB Reducer eccentric bw DN 250 -500 ASTM A420-WPL6 TERB Tee reducing bw DN 20 -200 ASTM A234-WPB TERB

Tee reducing bw

DN 250-500

ASTM A420-WPL6

PIPING CLASS – 151441X, Page 2 of 5 Valves Data Sheet No. BTFF VF.151441X.22 Ball valve 14313 flgd DN 50-500


BTRF VB.151441X.22 BTFF VF.151441X.21 BTRF VB.151441X.21


DN 50-500 DN 15-40 DN 15-40

Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PEEK Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PEEK Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PEEK

CHVF VC.151441X.21 Check valve flgd (Piston lift type) DN 15-40 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6


Check valve dual plate Lug type Check valve dual plate double flgd Check valve Swing flgd

DN 50-150 DN 200-500 DN 100-100

Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6

GAVF VG.151441X.21

Gate valve flgd DN 15-500


GLVF VL.151441X.21 Globe valve flgd DN 15-200 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6

NDVF VN.151441X.21 NDVF VN.151441X.22

Needle Valve flgd Needle Valve flgd

DN 15-15 DN 80-80

Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 Body: ASTM A105/A216-WCB/WCC

Trim: Alloy 825, Stellite 6 VDBT VDB.151441X.21 Double block and bleed Valve DN 15-50




ORFS Orifice flange set DN 50-450 ASTM A105 STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM



PIPING COMPONENTS PIPING CLASS- 151441X, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 Item description MESC Pipe Pipe 743003 0221 0321 0421 0621 0751 1151 1611 2271 2671 Pipe 743016 1131 1251 1381 1471 1821 2221 Flanges Blind flange 766210 4081 4121 4161 4181 4201 4221 4241 4261 4281 4301 4321 4341 4361 4381 4401 Spectacle blind 768837 1621 1641 1661 1681 1701 1721 1741 1761 Spacer ring 1781 1801 1821 1841 1861 1881 Note1 Spade 1781 1801 1821 1841 1861 1881 Note1 Welding neck flange 766279 9741 9761 9781 9801 9821 9841 9861 9881 9901 Welding neck flange 766280 0321 0341 0361 0381 0401 0441

Lap joint flange 766520 8131 Fittings Cap bw 763017 5731 5791 5831 5931 6131 6331 6521 6721 6951 Cap bw 763117 3151 3371 3571 3771 3931 Note 1 Elbow 45 deg bw 763034 5731 5791 5831 5931 6131 6331 6521 6721 6951 Elbow 45 deg bw 763134 3151 3371 3571 3771 3921 Note 1 Elbow 90 deg bw 763042 5731 5791 5831 5931 6131 6331 6521 6721 6951 Elbow 90 deg bw 763143 3151 3371 3571 3771 3921 Note 1 Tee equal bw 763081 5731 5791 5831 5931 6131 6331 6521 6721 6951 Tee equal bw 763180 3151 3371 3571 3771 3921 Note 1 Valves Ball valve 17292 flgd Ball valve 17292 flgd

770054 7031 7041 7051 7071 770054 2031 2041 2051 2071

Ball valve 14313 flgd 770091 7081 7101 7121 7141 7151 7161 7171 7181 7191 Ball valve 14313 flgd 770091 2081 2101 2121 2141 2151 2161 2171 2181 2191 Check valve dual plate double flgd Check valve dual plate Lug type Check valve flgd Piston lift type

NOTE 1 NOTE 1 NOTE 1

Gate valve flgd 772053 2031 2041 2051 2071 2081 2101 2121 2141 2151 2161 2171 2181 2191 2201 2211 Globe valve flgd Double block and bleed Valve Needle valve flgd

773053 2031 2041 2051 2071 2081 2101 2121 2141 2151 NOTE 1 NOTE 1

Miscellaneous Gasket spiral wound 854136 2041 2061 2081 2121 2141 2181 2201 2241 2261 2281 2301 2321 2341 2361 Note1 Meterrun 766496 0821 0841 0861 0881 Orifice flange set 766295 3381 3391 3281 3291 3301 3311 3321 3331 3341 3351 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications NOTE 1: NEW MESC NO, WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION.


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications Run x Br BROB RECB REEB TERB

20 x 15 7630661421 7630671421 7630880401 25 x 15 7630661521 7630671521 7630880501 25 x 20 7630661621 7630671621 7630880601 40 x 15 7630661721 7630671721 40 x 20 7630661821 7630671821 7630880801 40 x 25 7630661921 7630671921 7630880901 50 x 20 7629471961 7629621991 50 x 25 7630662021 7630672021 7630881081 50 x 40 7630662121 7630672121 7630881171 80 x 40 7630662321 7630672321 80 x 50 7630662421 7630672421 7630881351


Comp.name Description BNIB Branch fitting bw BNIF Branch fitting flgd BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw .

REDUCING/PIPING COMPONENTS Run x Br BROB RECB REEB TERB 400 x 50 7679031071 400 x 80 7679031201 400 x 100 7679032401 400 x 150 7679032601 400 x 200 7679032781 7631664591 7631754591 400 x 250 7631664681 7631754681 7631885101 400 x 300 7631664801 7631754801 7631885361 400 x 350 7631664911 7631754911 7631885611 450 x 50 7679031081 450 x 80 7679031211 450 x 100 7679032421 450 x 150 7679032621 450 x 200 7679032801 450 x 250 7631665301 7631755301 7631886091 450 x 300 7631665601 7631755601 7631886331 450 x 350 7631665911 7631755911 7631886571 450 x 400 7631666211 7631756211 7631886811 500 x 50 7679031091 500 x 80 7679031221 500 x 100 7679032441 500 x 150 7679032641 500 x 200 7679032821 500 x 250 7679032981 500 x 300 7631666501 7631756501 7631887531 500 x 350 7631666811 7631756811 7631887771 500 x 400 7631667111 7631757111 7631888011 500 x 450 7631667411 7631757411 7631888251


Branch Run pipe BNIB BNIF 15 40 - 500 7680310721 7680373411 20 50 - 50 7680310731 7680373421 20 80 - 150 7680310741 7680373441 20 200 - 500 7680310751 7680373471 25 80 - 250 7680310761 7680373481 25 300 - 500 7680310771 7680373491 40 80 - 80 7680310791 7680373521 40 100 - 200 7680310811 7680373531 40 250 - 500 7680310821 7680373541 50 100 - 500 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 8138663301 20 4 3/4 x 120 8138663321 25 4 7/8 x 130 8138664031 40 4 1 x 140 8138664691 50 8 7/8 x 150 8138664061 80 8 1 1/8 x 180 8138665331 100 8 1 1/4 x 200 8138665881 150 12 1 3/8 x 260 8138666491 200 12 1 5/8 x 340 8138667321 250 12 1 7/8 x 390 8138667951 300 16 2 x 430 8138668351 350 16 2 1/4 x 470 8138668591 400 16 2 1/2 x 510 8138867021 450 16 2 3/4 x 560 8138867771 500 16 3 x 620 8138868531 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 8138663371 20 4 3/4 x 150 8138663371 25 4 7/8 x 150 8138664061 40 4 1 x 160 8138664721 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 8138664071 80 8 1 1/8 x 190 8138665351 100 8 1 1/4 x 210 8138665951 150 12 1 3/8 x 280 8138666521 200 12 1 5/8 x 360 8138667361 250 12 1 7/8 x 410 8138667991 300 16 2 x 460 8138668341 350 16 2 1/4 x 500 8138866311 400 16 2 1/2 x 550 8138867061 450 16 2 3/4 x 600 8138867811 500 16 3 x 660 8138868571

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 8138663321 20 4 3/4 x 130 8138663341 25 4 7/8 x 140 8138664041 40 4 1 x 160 8138664721 50 8 7/8 x 170 8138664091 80 8 1 1/8 x 210 8138665381 100 8 1 1/4 x 230 8138665981 150 12 1 3/8 x 300 8138666551 200 12 1 5/8 x 390 8138667401 250 12 1 7/8 x 450 8138668031 300 16 2 x 500 8138865611 350 16 2 1/4 x 550 8138866361 400 16 2 1/2 x 600 8138867111 450 16 2 3/4 x 660 8138867871 500 16 3 x 730 8138868641



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 153451Z Design limits Temperature (°C) -101 0 50 100 150 180 205 Pressure (Bar ga) DN 15- 200 187.3 187.3

181.4 158.8 158.8 158.8 158.8

Notes - -

Intended for Vent Gas & Process Gas service. Design limits acc. to ASME B16.5 flange rating mat. grp 2.2 (ASME B16.5 up to DN 600 and B16.47 for larger sizes). and ASME B31.3 allowable internal pressure, and limited by allowable stress of bolting material.


degr. C in saliferous atmospheres to prevent chloride stress corrosion cracking - When chlorides are present in the process fluid in conjunction with free oxygen, the max.




Table of schedules

DN Schedule 15 80S 20 80S 25 80S 40 160 50 160 80 160

100 160 150 160 200 140


15 20 25 40 50 80 100 150 200





ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-200 ASTM A312-TP316L Flanges BLFL Blind flange DN 15-200 ASTM A182-F316 LJFL Lap joint flange DN 50-50 ASTM A182-F316 SBFL Spectacle blind DN 15-150 ASTM A240-TP316 SPFL Spade DN 200-200 ASTM A240-TP316 SPRT Spacer ring DN 200-200 ASTM A240-TP316 WNFL Welding neck flange DN 15-200 ASTM A182-F316 Fittings CAPB Cap bw DN 15-200 ASTM A403-WP316L E45B Elbow 45 deg bw DN 15-200 ASTM A403-WP316L E90B Elbow 90 deg bw DN 15-200 ASTM A403-WP316L TEEB Tee equal bw DN 15-200 ASTM A403-WP316L Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 50-50 ASTM A182-F316 BNIB Branch fitting bw DN 15-40 ASTM A182-F316 BROB Branch outlet bw DN 150-200 ASTM A182-F316 RECB Reducer concentric bw DN 20-200 ASTM A403-WP316L REEB Reducer eccentric bw DN 20-200 ASTM A403-WP316L TERB Tee reducing bw DN 20-200 ASTM A403-WP316L

PIPING CLASS – 153451Z, Page 2 of5 Valves Data Sheet No. BAFF VF.153451Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182- F316/A351-CF8M

Trim: AISI 316, PEEK BTFF VF.153451Z.22 Ball valve 14313 flgd DN 50-200 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK BARF VB.153451Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182- F316/A351-CF8M

Trim: AISI 316, PEEK BTRF VB.153451Z.22 Ball valve 14313 flgd DN 50-200 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK CHVF VC.153451Z.21 CHVF VC.153451Z.22


DN 15-40 - DN 50-150

Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 Body: ASTM A182-F316/A351-CF8M

Trim: AISI 316, Stellite 6 CHVF VC.153451Z.23 Check valve Dual plate double flgd DN 200-200 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 GAVF VG.153451Z.21 Gate valve flgd DN 15-200 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 GLVF VL.153451Z.21 Globe valve flgd DN 15-200 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 VDBT VDB.153451Z.21 Double block and bleed Valve DN 15-50

Body: ASTM A182-F316 Trim: AISI 316, PEEK

Miscellaneous GKSW Gasket spiral wound DN 15-200 AISI 316, graphite filled MTRR Meterrun CS centring-/SS inner ring ORFS Orifice flange set DN 15-40 Alloy 400/AISI 316 end flanges DN 50-200 ASTM A182-F316 STBT Studbolt with nuts --- ASTM A320-B8M/A194-8MA



PIPING COMPONENTS PIPING CLASS-153451Z , Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 Item description MESC Pipe Pipe 743633 0201 0281 0361 0541 0631 0711 0791 0881 Note 1 Flanges Blind flange 766510 5001 5011 5021 5031 5041 5051 5061 5071 5081 Lap joint flange 766520 8131 Spectacle blind 768810 5081 5121 5161 5181 5201 5221 5241 5261 Note 1 Spacer ring 768819 6281 Spade 768843 6781 Welding neck flange 766580 6021 6041 6061 6111 6101 6121 6141 6161 Note 1 Fittings Cap bw 763319 2881 2981 3081 3301 3401 3601 3801 3991 Note 1 Elbow 45 deg bw 763337 2881 2981 3081 3301 3401 3601 3801 3991 Note 1 Elbow 90 deg bw 763341 2881 2981 3081 3301 3401 3601 3801 3991 Note 1 Tee equal bw 763384 7881 7981 8081 8301 8401 8601 8801 8991 Note 1 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

770325 7031 7041 7051 7071 770325 2031 2041 2051 2071 770373 7081 7101 7121 7141 7151

Ball valve 14313 flgd 770373 2081 2101 2121 2141 2151 Check valve dual plate double flgd Check valve dual plate Lug type Check valve flgd Piston lift type


Gate valve flgd 772305 2031 2041 2051 2071 2081 2101 2121 2141 2151 Globe valve flgd 773305 2031 2041 2051 2071 2081 2101 2121 2141 2151 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 2041 2061 2081 2121 2141 2181 2201 2241 Note 1 Meterrun 766496 0321 0341 0361 0381 Orifice flange set 766592 7211 7221 7231 7241 Note 1 Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION.




20 x 15 7633705681 7633725681 7633856201 25 x 15 7633705781 7633725781 7633856301 25 x 20 7633705881 7633725881 7633856401 40 x 15 7633706051 7633726051 40 x 20 7633706231 7633726231 7633856531 40 x 25 7633706331 7633726331 7633856611 50 x 20 7636501041 7636631041 50 x 25 7633706391 7633726391 7633856791 50 x 40 7633706501 7633726501 7636861391 80 x 40 7633706801 7633726801 80 x 50 7633706901 7633726901 7636861731

100 x 40 7633706991 7633726991 100 x 50 7633707101 7633727101 7636862081 100 x 80 7633707201 7633727201 7636862271 150 x 50 7679711841 150 x 80 7633707501 7633727501 7636862461 150 x 100 7633707601 7633727601 7636862641 200 x 100 <----------------- ----- Note 1---- ---------------- 200 X 150 <----------------- ----- Note 1---- ---------------- 200 x 50 Note 1 200 X 80 Note 1


PIPING CLASS-153451Z , Page 4 of 5

.

Branch Run pipe BNIF BNIP 15 40 - 40 7680316031 15 50 - 50 7680316051 15 80 - 200 7680316071 20 50 - 50 7680316191 20 80 - 100 7680316201 20 150 - 200 7680316211 25 80 - 80 7680316241 25 100 - 100 7680316251 25 150 - 200 7680316261 40 80 - 80 7680316611 40 100 - 200 7680316631 50 100 - 200 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 Note 1 20 4 3/4 x 120 Note 1 25 4 7/8 x 130 Note 1 40 4 1 x 140 Note 1 50 8 7/8 x 150 Note 1 80 8 1 1/8 x 180 Note 1 100 8 1 1/4 x 200 Note 1 150 12 1 3/8 x 260 Note 1 200 12 1 5/8 x 340 Note 1 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 Note 1 20 4 3/4 x 150 Note 1 25 4 7/8 x 150 Note 1 40 4 1 x 160 Note 1 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 Note 1 80 8 1 1/8 x 190 Note 1 100 8 1 1/4 x 210 Note 1 150 12 1 3/8 x 280 Note 1 200 12 1 5/8 x 360 Note 1

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 Note 1 20 4 3/4 x 130 Note 1 25 4 7/8 x 140 Note 1 40 4 1 x 160 Note 1 50 8 7/8 x 170 Note 1 80 8 1 1/8 x 210 Note 1 100 8 1 1/4 x 230 Note 1 150 12 1 3/8 x 300 Note 1 200 12 1 5/8 x 390 Note 1

PIPING CLASS-153451Z , Page 5 of 5



CLASS 158220X Design limits Temperature (°C) -29 0 50 100 125 150 180 Pressure (Bar ga) DN 15-80 228.5 228.5 228.5 228.5 228.5 228.5 219.8 DN 100-200 202.9 202.9 202.9 202.9 202.9 202.9 202.9 Notes - -

Intended for Drain services Design limits acc. to ASME B16.5 flange rating mat. grp 2.8 (ASME B16.5 up to DN 600 and B16.47 for larger sizes). and limited by allowable stresses in bolting material


when necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - - -

The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality ASTM A995 Gr.5A to be used for casting of SDSS valves as pressure containing part

Table of schedules


100 80S 150 80S 200 80S


15 20 25 40 50 80 100 150 200



Stainless steel UNS S32750 Sour Plant Qusahwira Phase II FEED Class no. 158220X Consignee ASME rating CLASS 1500 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395 ADCO DOC.NO.58.99.12.0603, APPENDIX 2


ASTM A790-UNS S32750

Flanges BLFL Blind flange DN 15-200 ASTM A182 Grade F53 LJFL Lap joint flange DN 50-50 ASTM A182 Grade F53 SBFL Spectacle blind DN 15-150 ASTM A182 Grade F53 SPFL Spade DN 200-200 ASTM A182 Grade F53 SPRT Spacer ring DN 200-200 ASTM A182 Grade F53 WNFL Welding neck flange DN 15-200

ASTM A182 Grade F53

Fittings CAPB Cap bw DN 15-200 ASTM A815 Grade WPS32750 E45B Elbow 45 deg bw DN 15-200 ASTM A815 Grade WPS32750 E90B Elbow 90 deg bw DN 15-200 ASTM A815 Grade WPS32750 TEEB Tee equal bw DN 15-200

ASTM A815 Grade WPS32750

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A182 Grade F53 BROB Branch outlet bw DN 150-200 ASTM A182 Grade F53 RECB Reducer concentric bw DN 20-200 ASTM A815 Grade WPS32750 REEB Reducer eccentric bw DN 20-200 ASTM A815 Grade WPS32750 TERB Tee reducing bw DN 20-200 ASTM A815 Grade WPS32750 BNIF Branch fitting flgd DN 50-50 ASTM A182 Grade F53

PIPING CLASS – 158220X, Page 2 of 5 Valves Data Sheet No.

BAFF VF.158220X.21 Ball valve 17292 flgd DN 15-40

Body: ASTM A182-F53/ A995 GR. 5A Trim: UNS32750, PEEK

BAFF VF.158220X.22 Ball valve 14313 flgd DN 50-200


BARF VB.158220X.21 Ball valve 17292 flgd DN 15-40


BARF VB.158220X.22 Ball valve 14313 flgd DN 50-200 Body: ASTM A182-F53/ A995 GR. 5A Trim: UNS32750, PEEK

CHDF VC.158220X.22 Check valve dual plate Lug type DN 50-150

Body: ASTM A182-F53/ A995 GR. 5A Trim: UNS32750, Stellite 6



CHDF VC.158220X.23 Check valve dual plate double flgd

DN 200-200




GLVF VL.158220X.21 Globe valve flgd DN 15-200 Body: ASTM A182-F53/ A995 GR. 5A Trim: UNS32750, Stellite 6 VDBT VDB.158220X.21 Double block and bleed Valve DN 15-50



Super Duplex SS, graphite filled CS centring-/Super Duplex SS inner ring

MTRR Meterrun DN 15-40 UNS32750 ORFS Orifice flange set DN 50-200 ASTM A182-F53 STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM



PIPING COMPONENTS PIPING CLASS – 158220X, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 Item description MESC Pipe Pipe Note 1 Flanges Blind flange Note1 Spectacle blind Note1 Welding neck flange Note1 Lap joint flange Note1 Fittings Cap bw Note1 Elbow 45 deg bw Note1 Elbow 90 deg bw Note1 Tee equal bw Note1 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd Ball valve 14313 flgd

Check valve dual plate double flgd NOTE 1 Check valve dual plate Lug type Check valve flgd Piston lift type

Gate valve flgd Globe valve flgd Double block and bleed Valve. Miscellaneous Gasket spiral wound Note1 Meterrun Note1 Orifice flange set Note1 Note1 Note1 Note1 Note1 Strainer Y-type Note1 Note1 Note1 Note1 Note1 NOTE 1: NEW MESC NO.WILL BE GENERATED, REFER CL.9.12 OF ADCO OF THIS SPECIFICATION.


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING/PIPING COMPONENTS

Run

x

Br

BROB RECB

REEB

TERB

20 x 15 Note 1 Note 1 Note 1 25 x 15 Note 1 Note 1 Note 1 25 x 20 Note 1 Note 1 Note 1 40 x 15 Note 1 Note 1 40 x 20 Note 1 Note 1 Note 1 40 x 25 Note 1 Note 1 Note 1 50 x 20 Note 1 Note 1 50 x 25 Note 1 Note 1 Note 1 50 x 40 Note 1 Note 1 Note 1 80 x 40 Note 1 Note 1 80 x 50 Note 1 Note 1 Note 1

100 x 40 Note 1 Note 1 100 x 50 Note 1 Note 1 Note 1 100 x 80 Note 1 Note 1 Note 1 150 x 80 Note 1 Note 1 Note 1 7636862461 150 x 100 Note 1 Note 1 Note 1 7636862641 200 x 50 Note 1 ---------------- 200 X 80 Note 1 ---------------- 200 x 100 Note 1 Note 1 Note 1 200 X 150 Note 1 Note 1 Note 1



Branch Run pipe BNIF BNIP 15 40 - 40 Note 1 15 50 - 50 Note 1 15 80 - 200 Note 1 20 50 - 50 Note 1 20 80 - 200 Note 1 25 80 - 80 Note 1 25 100 - 200 Note 1 40 80 - 80 Note 1 40 100 - 100 Note 1 50 100 - 200 Note 1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 8138663301 20 4 3/4 x 120 8138663321 25 4 7/8 x 130 8138664031 40 4 1 x 140 8138664691 50 8 7/8 x 150 8138664061 80 8 1 1/8 x 180 8138665331 100 8 1 1/4 x 200 8138665881 150 12 1 3/8 x 260 8138666491 200 12 1 5/8 x 340 8138667321 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 8138663371 20 4 3/4 x 150 8138663371 25 4 7/8 x 150 8138664061 40 4 1 x 160 8138664721 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 8138664071 80 8 1 1/8 x 190 8138665351 100 8 1 1/4 x 210 8138665951 150 12 1 3/8 x 280 8138666521 200 12 1 5/8 x 360 8138667361

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 8138663321 20 4 3/4 x 130 8138663341 25 4 7/8 x 140 8138664041 40 4 1 x 160 8138664721 50 8 7/8 x 170 8138664091 80 8 1 1/8 x 210 8138665381 100 8 1 1/4 x 230 8138665981 150 12 1 3/8 x 300 8138666551 200 12 1 5/8 x 390 8138667401




Short Form Material Class Specifications

CLASS 251440U Design limits Temperature (°C) 0 50 75 100 125 150 Pressure (Bar ga) DN 25- 100 314.9 314.9 314.9 314.9 314.9 314.9 DN 150-300 287.7 287.7 287.7 287.7 287.7 287.7 Notes - -

Intended for Underground process drain services. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).and ASME B31.3 allowable internal pressure, and limited by allowable stress of bolting material


necessary for process/operating requirements - - Minimum line size for underground buried drain service is DN100. Table of schedules

DN Schedule 25 XXS 40 XXS 50 XXS 80 XXS

100 XXS 150 XXS

PIPING CLASS – 251440U ,Page 1 of 5 Branch connections 90 degrees Branch Size Run size

25 40 50 80 100 150 200 250 300

300 C C E E E B B B A 250 C C E E B B B A 200 C C E E B B A 150 C C E B B A 100 C C B B A 80 C C B A 50 B B A 40 B A 25 A





Carbon steel sour Plant Qusahwira Phase II FEED Class no. 251440U Consignee Asme rating CLASS 2500 Engineered by Snc Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395




COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 25-150 ASTM A106-B Flanges BLFL Blind flange DN 25-150 ASTM A105 LJFL Lapjointflange DN 50-50 ASTM A182 F316 SBFL Spectacle blind DN 25-150 ASTM A516-60/65/70 WNFL Welding neck flange DN 25-150 ASTM A105 Fittings CAPB Cap bw DN 25-150 ASTM A234-WPB E45B Elbow 45 deg bw DN 25-150 ASTM A234-WPB E90B Elbow 90 deg bw DN 25-150 ASTM A234-WPB TEEB Tee equal bw DN 25-150 ASTM A234-WPB Reducing fittings BNIB Branch fitting bw DN 25-40 ASTM A105N BNIF Branch fitting flgd DN 50 -50 ASTM A105N BROB Branch outlet bw DN 150-150 ASTM A105N RECB Reducer concentric bw DN 25-150 ASTM A234-WPB REEB Reducer eccentric bw DN 25-150 ASTM A234-WPB TERB Tee reducing bw DN 25-150 ASTM A234-WPB

PIPING CLASS – 251440U ,Page 2 of 5

Valves Valve Tag No. BTFF VF.251440Z.22 Ball valve 14313 flgd DN 50-150 Body: ASTM A105/A216-WCB/WCC Trim: Super Duplex, PEEK BTRF VB.251440Z.22 Ball valve 14313 flgd DN 50-150 Body: ASTM A105/A216-WCB/WCC Trim: Super Duplex, PEEK CHDF VC.251440Z.21 Check Valve (piston lift type) DN 25-40 Body: ASTM A105/A216-WCB/WCC Trim: Super Duplex, Stellite 6 CHVF VC.251440Z.22 Check valve dual plate Lug type DN 50-150 Body: ASTM A105/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GAVF VG.251440Z.21 Gate valve flgd DN 25-150 Body:ASTM A105/A216-WCB/WCC Trim: Super Duplex, Stellite 6 GLVF VL.251440Z.21 Globe valve flgd DN 25-150 Body: ASTM A105/A216-WCB/WCC Trim: Super Duplex, Stellite 6 VDBT VDB.251440Z.22 Double block and bleed Valve DN15-50 Body: ASTM A350-LF2

Trim: Alloy 825, PEEK

Miscellaneous

GKSW Gasket spiral wound DN 25-150 AISI 316, graphite filled CS centring-/SS inner ring ORFS Orifice flange set DN 50-150 ASTM A105 STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM




PIPING COMPONENTS PIPING CLASS – 251440U ,Page 3 of 5 PIPING Nominal pipe size 25 40 50 80 100 150 Item description MESC Pipe Pipe 743003 0421 0621 0751 1151 1631 2291 Flanges Blind flange 766210 4761 4781 4801 4841 4861 4901 Lapjoint flange 766520 5701 Spectacle blind 768837 2061 2081 2101 2121 2141 2161 Welding neck flange 766280 0561 0581 0601 0641 0661 0681 Fittings Cap bw 763017 5831 5931 6131 6331 6531 6731 Elbow 45 deg bw 763034 5831 5931 6131 6331 6531 6731 Elbow 90 deg bw 763042 5831 5931 6131 6331 6531 6731 Tee equal bw 763081 5831 5931 6131 6331 6531 6731 Valves

Ball valve 14313 RF flgd 770067 7581 7601 7621 7641 Ball vallve 14313 flgd 770067 2581 2601 2621 2641 Check Valve (Piston Lift type) NOTE 1 Check valve dual plate Lug type NOTE 1 Gate valve flgd 772004 2581 2601 2621 2641 Gate valve flgd 772078 2551 2571 Globe Valve flgd 773005 2581 2601 2621 2641 Globe Valve flgd 773056 2551 2571 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 2541 2561 2621 2681 2701 2741 Orifice flange set 766295 4831 4851 5221 NOTE 1: NEW MESC NO, WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION.





40 x 25 7630661921 7630671921 7630880901 50 x 25 7630662021 7630672021 7630881081 50 x 40 7630662121 7630672121 7630881171 80 x 40 7630662321 7630672321 80 x 50 7630662421 7630672421 7630881351

100 x 40 7630662601 7630672601 100 x 50 7630662721 7630672721 7630881561 100 x 80 7630662821 7630672821 7630881681 150 x 50 7679030021 150 x 80 7630663021 7630673021 7630881801 150 x 100 7630663121 7630673121 7630881931

Comp.name

Description

BROB Branch outlet bw RECB Reducer concentric bw REEB Reducer eccentric bw TERB Tee reducing bw


Branch Run pipe BNIB BNIF 25 80 - 150 7680310761 7680374481 40 80 - 80 7680310791 7680374521 40 100 - 150 7680310811 7680374531 50 80 - 80 Note1 7680374591 50 100 - 150 Note 1 7680374601




BOLTING Boltset standard flange DN nr inch x mm MESC number 25 4 7/8 x 140 8138664041 40 4 1 1/8 x 180 8138665331 50 8 1 x 180 8138664751 80 8 1 1/4 x 230 8138665981 100 8 1 1/2 x 300 8138666961 150 8 2 x 400 8138668241 Boltset orifice flange DN nr inch x mm MESC number 50 8 1 x 190 8138664771 80 8 1 1/4 x 240 8138666001 100 8 1 1/2 x 310 8138666981 150 8 2 x 410 8138668251 Boltset blind/spacer DN nr inch x mm MESC number 25 4 7/8 x 160 8138664071 40 4 1 1/8 x 190 8138665351 50 8 1 x 200 8138664971 80 8 1 1/4 x 260 8138666031 100 8 1 1/2 x 330 8138667011 150 8 2 x 450 8138668311



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 251503Z Design limits Temperature (°C) -45 0 50 100 150 200 205 Pressure (Bar ga) DN 15- 250 388.3 388.3 388.3 388.3 375.6 365.0 363.45 Notes - -

Intended for injection gas, process gas, vent gas,Raw water & drain services. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1, (ASME B16.5 up to DN 600 and B16.47 for larger sizes).and limited by allowable stress of bolting material



The use of dual plate check valves is considered most economical. Use swing check valves only where fouling and abrasion are negatively affecting their functionality

Table of schedules

DN Schedule 15 XXS 20 XXS 25 XXS 40 10.5 mm 50 12.2 mm 80 16.3 mm

100 20.0 mm 150 27.8 mm 200 35.2 mm 250 43.0 mm


15 20 25 40 50 80 100 150 200 250

250 C C C C E E B B B A 200 C C C C E E B B A 150 C C C C E B B A 100 C C C C B B A 80 C C C C B A 50 C C B B A 40 C B B A 25 B B A 20 B A 15 A




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-250 ASTM A333-6 Flanges BLFL Blind flange DN 15-250 ASTM A350-LF2 LJFL Lap joint flange DN 50-50 ASTM A182 F316 SBFL SPFL

Spectacle blind Spade

DN 15-150 DN 200-250

ASTM A516-60/65/70 ASTM A516-60/65/70

SPRT Spacer ring DN 200-250 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-250 ASTM A350-LF2 Fittings CAPB Cap bw DN 15-250 ASTM A420-WPL6 E45B Elbow 45 deg bw DN 15-250 ASTM A420-WPL6 E90B Elbow 90 deg bw DN 15-250 ASTM A420-WPL6 TEEB Tee equal bw DN 15-250 ASTM A420-WPL6 Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 50-50 ASTM A350-LF2 BNIB Branch fitting bw DN 15-40 ASTM A350-LF2 BROB Branch outlet bw DN 150-250 ASTM A350-LF2 RECB Reducer concentric bw DN 20-250 ASTM A420-WPL6 REEB Reducer eccentric bw DN 20-250 ASTM A420-WPL6 TERB Tee reducing bw DN 20-250 ASTM A420-WPL6

PIPING CLASS – 251503Z, Page 2 of 5 Valves Valve Data Sheet No. BTFF VF.251503Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, Stellite 6 BTFF VF.251503Z.22 Ball valve 14313 FB (DN

50, 80) flgd DN 50-250 Body: ASTM A350-LF2/A352-LCC

Trim: Alloy 825, Stellite 6 BTRF VB.251503Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, Stellite 6 BTRF VB.251503Z.22 Ball valve 14313 flgd DN 50-250 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, Stellite 6 CHDF VC.251503Z.22 Check valve dual plate

Lug type DN 50-150 Body: ASTM A 350-LF2/A352-LCC

Trim: Alloy 825, Stellite 6 CHDF VC.251503Z.23 Check valve dual plate

double flanged DN 200-250 Body: ASTM A 350-LF2/A352-LCC

Trim: Alloy 825, Stellite 6 CHVF VC.251503Z.21 Check valve (piston type) DN 15-40

Body: ASTM A350-LF2/A352-LCC

CHSF VC.251503Z.24 Check Valve Swing flanged

DN 50-150 Body: ASTM A350-LF2/A352-LCC Trim: Alloy 825, Stellite 6

GAVF VG.251503Z.21 Gate valve flgd DN 15-250 Body: ASTM A350-LF2/A352-LCC Trim: AlIoy 825, Stellite 6 GLVF VL.251503Z.21 Globe valve flgd DN 15-200 Body: ASTM A350-LF2/A352-LCC Trim: AlIoy 825, Stellite 6 NDVF VN.251503Z.21 Needle Valve flgd DN 15-15 Body: ASTM A350-LF2/A352-LCC Trim: AlIoy 825, Stellite 6 VDBT VDB.251503Z.21 Double block and bleed

Valve DN 15-50 Body: ASTM A350-LF2

Trim: Alloy 825, PEEK Miscellaneous GKSW Gasket spiral wound DN 15-250 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 end flanges ORFS Orifice flange set DN 50-250 ASTM A350-LF2 ST3B Strainer Y-type (3 mm ca) DN 50-250 Sieve: UNS N08825 STBT Studbolt with nuts --- ASTM A320-L7M/A194-7M



PIP

PIPING CLASS 251503Z, Page 3 of 5 PIPING COMPONENTS Nominal pipe size 15 20 25 40 50 80 100 150 200 250 Item description MESC Pipe Pipe 743017 0251 0321 0401 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Flanges Blind flange 766212 7081 7121 7161 Note1 Note1 Note1 Note1 7261 Note1 Note1 Spectacle blind 768834 7081 7121 7161 Note1 Note1 Note1 Note1 7301 Spacer ring Note1 Note1 Spade Note1 Note1 Welding neck flange 768834 7801 7821 7841 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Lap Joint flange 766520 8311 Fittings Cap bw 763118 1731 1791 1831 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Elbow 45 deg bw 763138 1731 1791 1831 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Elbow 90 deg bw 763139 1731 1791 1831 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Tee equal bw 763184 1731 1791 1831 Note1 Note1 Note1 Note1 Note1 Note1 Note1 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

Ball valve 14313 flgd Check valve dual plate double flgd Check valve dual plate Lug type Check valve flgd Piston lift type

NOTE 1

Gate valve flgd Globe valve flgd Double block and bleed Valve Needle Valve flgd

Miscellaneous Gasket spiral wound 854136 2541 2561 2581 2621 2641 2681 2701 2741 2761 2781 Orifice flange set 766297 Note1 Note Note1 Note1 Note1 Note1 Strainers

Note1 Note Note1 Note1 Note1 Note1

NOTE 1: NEW MESC NO, WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION



20 x 15 7631701421 7631711421 7631850401 25 x 15 7631701521 7631711521 7631850501 25 x 20 7631701621 7631711621 7631850601 40 x 15 Note1 Note1 Note1 40 x 20 Note1 Note1 Note1 40 x 25 Note1 Note1 Note1 50 x 20 Note1 Note1 Note1 50 x 25 Note1 Note1 Note1 50 x 40 Note1 Note1 Note1 80 x 40 Note1 Note1 Note1 80 x 50 Note1 Note1 Note1

100 x 40 Note1 Note1 Note1 100 x 50 Note1 Note1 Note1 100 x 80 Note1 Note1 Note1 150 x 50 Note1 Note1 Note1 150 x 80 Note1 Note1 Note1 150 x 100 Note1 Note1 Note1 200 x 50 Note1 200 x 80 Note1 200 x 100 Note1 Note1 Note1 200 x 150 Note1 Note1 Note1 250 x 50 Note1 250 x 80 Note1 250 x 100 Note1 Note1 Note1 250 x 150 Note1 Note1 Note1 250 x 200 Note1 Note1 Note1



Branch Run pipe BNIB BNIF 15 40 - 250 Note1 20 50 - 50 Note1 20 80 - 150 Note1 20 200 - 250 Note1 25 80 - 250 Note1 40 80 - 80 Note1 40 100 - 200 Note1 40 250 - 250 Note1 50 100 - 200 Note1 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 130 8138633301 20 4 3/4 x 130 8138633321 25 4 7/8 x 140 8138634031 40 4 1 1/8 x 180 8138634691 50 8 1 x 180 8138634061 80 8 1 1/4 x 230 8138634061 100 8 1 1/2 x 300 8138635331 150 8 2 x 400 8138635241 200 12 2 x 440 8138618291 250 12 2 1/2 x 550 8138837061 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 8138633371 20 4 3/4 x 150 8138633371 25 4 7/8 x 150 8138634061 40 4 1 x 160 8138634721 Boltset orifice flange DN nr inch x mm MESC number 50 8 1 x 190 8138634071 80 8 1 1/4 x 240 8138634071 100 8 1 1/2 x 310 8138635351 150 8 2 x 410 8138635381 200 12 2 x 460 8138618341 250 12 2 1/2 x 570 8138837081

PIPING CLASS - 251503Z, Page 5 of 5

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 140 8138633321 20 4 3/4 x 140 8138633341 25 4 7/8 x 160 8138634041 40 4 1 1/8 x 190 8138634721 50 8 1 x 200 8138634091 80 8 1 1/4 x 260 8138634091 100 8 1 1/2 x 330 8138635241 150 8 2 x 450 8138635411 200 12 2 x 500 8138618341 250 12 2 1/2 x 610 8138837081



CLASS 253411Z Design limits Temperature (°C) -20 0 50 75 100 125 Pressure (Bar ga) DN 15- 50 351.0 351.0 351.0 351.0 351.0 336.2 Notes - -

Intended for Bactericide, demulsifier & corrosion inhibitor services. Design limits acc. to ASME B16.5 flange rating mat. grp 2.2 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).and ASME B31.3 allowable internal pressure limited due to stresses in bolting material.




necessary for process/operating requirements - -


Table of schedules

DN Schedule 15 80S 20 160 25 160 40 XXS 50 XXS


15 20 25 40 50 80 100 150 200




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe

DN 15- 50 ASTM A312-TP316L

Flanges BLFL Blind flange DN 15- 50 ASTM A182-F316 LJFL Lap joint flange DN 50-50 ASTM A182-F316 SBFL Spectacle blind DN 15- 50 ASTM A240-TP316 WNFL Welding neck flange DN 15- 50 ASTM A182-F316 Fittings CAPB Cap bw DN 15- 50 ASTM A403-WP316L E45B Elbow 45 deg bw DN 15- 50 ASTM A403-WP316L E90B Elbow 90 deg bw DN 15- 50 ASTM A403-WP316L TEEB Tee equal bw DN 15- 50 ASTM A403-WP316L Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 50 -50 ASTM A182-F316 BNIB Branch fitting bw DN 15-40 ASTM A182-F316 RECB Reducer concentric bw DN 20- 50 ASTM A403-WP316L REEB Reducer eccentric bw DN 20- 50 ASTM A403-WP316L TERB Tee reducing bw DN 20- 50 ASTM A403-WP316L

PIPING CLASS – 253411Z, , Page 2 of 5

Valves Data Sheet No.

BAFF VF.253411Z.21 Ball valve 17292 flgd DN 15-40 Body: ASTM A182-F316/A351-CF8M BARF VB.253411Z.21


DN 15-40

Trim: AISI 316, DEVLON V Body: ASTM A182-F316/A351-CF8M

Trim: AISI 316, DEVLON V BTFF VF.253411Z.22 BTRF VB.253411Z.22


DN 50-50 DN 50-50

Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, DEVLON V Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, DEVLON V

CHVF VC.253411Z.21 Check valve (piston lift) DN 15- 40 Body: ASTM A182-F316/A351-CF8M CHWF VC.253411Z.22 CHSF VC.253411Z.23

Check valve dual plate Lug type Check Valve Swing

DN 50-50 DN 50- 150

Trim: AISI 316, Stellite 6 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite

GAVF VG.253411Z.21 Gate valve flgd DN 15- 50 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 GLVF VL.253411Z.21 Globe valve flgd DN 15- 50 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 VDBT VDB.253411Z.21 Double block and bleed

Valve DN 15-50 Body: ASTM A182-F316/A351-CF8M

Trim: AISI 316, Devlon V Miscellaneous

GKSW Gasket spiral wound DN 15- 50 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/AISI 316 end flanges STBT Studbolt with nuts --- ASTM A193-B7/A194-2H

Stainl steel AISI 316L Plant Qusahwira Phase II FEED Class no. 253411Z Consignee ASME rating CLASS 2500 Engineered by Snc Lavalin International Corrosion allowance 0 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395



PIPING COMPONENTS PIPNG CLASS 253411Z,Page 3 of 5 Nominal pipe size 15 20 25 40 50 Item description MESC Pipe Pipe 743633 0201 0291 0381 Note1 Note1 Flanges Blind flange 766510 5511 5521 5531 5541 5551 Spectacle blind 768810 5381 5481 5461 5481 5501 Welding neck flange 766580 Note1 6241 6261 Note1 Note1 Lap Joint flange 766520 8311 Fittings Cap bw 763319 2881 3011 3111 Note1 Note1 Elbow 45 deg bw 763337 2881 3011 3111 Note1 Note1 Elbow 90 deg bw 763341 2881 3011 3111 Note1 Note1 Tee equal bw 763384 7881 8001 8101 8311 8411 Valves Ball valve 14313 flgd 770363 7581 Ball valve 14313 flgd 770363 2581 Ball valve 17292 flgd 770326 7531 7541 7551 7571 Ball valve 17292 flgd 770326 2531 2541 2551 2571 Check valve dual plate Lug type Check valve flgd Piston lift type

NOTE 1 NOTE 1

Gate valve flgd 772384 2531 2541 2551 2571 Gate valve flgd 772303 2581 Globe valve flgd 773303 2581 Globe valve flgd Double block and bleed Valve

773384 2531 2541 2551 2571 NOTE 1

Miscellaneous Gasket spiral wound 854136 2541 2561 2581 Note1 Note1 Meterrun Note1 Note1 Note1 Note1 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications NOTE 1: NEW MESC NO, WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION

REDUCING PIPING COMPONENTS Run x Br BROB RECB REEB TERB

20 x 15 Note1 Note1 Note1 25 x 15 Note1 Note1 Note1 25 x 20 Note1 Note1 Note1 40 x 15 Note1 Note1 Note1 40 x 20 Note1 Note1 Note1 40 x 25 Note1 Note1 Note1 50 x 20 Note1 Note1 Note1 50 x 25 Note1 Note1 Note1 50 x 40 Note1 Note1 Note1

PIPNG CLASS 253411Z,Page 4 of 5

Branch Run pipe BNIB BNIF

15 40 - 50 Note1 20 50 - 50 Note1 20 80 - 100 Note1 25 80 - 100 Note1 40 80 - 100 Note1 50 80 - 80 Note1 50 100 - 100 Note1 Note1



ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 130 Note 1 20 4 3/4 x 130 Note 1 25 4 7/8 x 140 Note 1 40 4 1 1/8 x 180 Note 1 50 8 1 x 180 Note 1 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 Note 1 20 4 3/4 x 150 Note 1 25 4 7/8 x 150 Note 1 40 4 1 x 160 Note 1

Boltset orifice flange DN nr inch x mm MESC number 50 8 1 x 190 Note 1

PIPING CLASS 253411Z,Page 5 of 5

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 140 Note 1 20 4 3/4 x 140 Note 1 25 4 7/8 x 160 Note 1 40 4 1 1/8 x 190 Note 1 50 8 1 x 200 Note 1



CLASS 253451Z Design limits Temperature (°C) -101 0 50 100 150 180 Pressure (Bar ga) DN 15-200

407.9

407.9

400.9

351.6

320.8

306.6

DN 15-200 (for insulated lines)

321.6 321.6 321.6 321.5 320.8 306.6

Notes - Intended for Hydrocarbon condensate, corrosion inhibitor,injection gas, Process gas, Vent gas &

Nitrogen services. - Design limits acc. to ASME B16.5 flange rating mat. grp 2.2 (ASME B16.5 up to DN 600 and

B16.47 for larger sizes).and ASME B31.3 allowable internal pressure, limited to applicable line conditions and bolting calculations as per ASME Sec VIII DIV.1 Appendix 2 .




necessary for process/operating requirements - - -

Piston type check valves (DN 15-40) for horizontal mounting only Valves if used in Insulated lines shall be of Tag .INS (for example VB.253451Z.21.INS)

Table of schedules

DN Schedule 15 160 20 160 25 160 40 XXS 50 XXS 80 15.8

100 20.3 mm 150 200

29.9 mm 38.9 mm


15 20 25 40 50 80 100 150 200

200 150

C C

C C

C C

C C

E E

E B

B B

B A A





COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-200 ASTM A312-TP316L Flanges BLFL Blind flange DN 15-200 ASTM A182-F316 LJFL Lap joint flange DN 50-50 ASTM A182-F316 SBFL Spectacle blind DN 15-150 ASTM A240-TP 316 SPRT SPFL

Spacer ring spade

DN 200-200 DN 200-200

ASTM A240-TP 316 ASTM A240-TP 316

WNFL Welding neck flange DN 15-200 ASTM A182-F316 Fittings (Refer Branch table for size range of all reducing branch fittings) CAPB Cap bw DN 15-200 ASTM A403-WP316L E45B Elbow 45 deg bw DN 15-200 ASTM A403-WP316L E90B Elbow 90 deg bw DN 15-200 ASTM A403-WP316L TEEB Tee equal bw DN 15-200 ASTM A403-WP316L Reducing fittings BNIF Branch fitting flgd DN 50-50 ASTM A182-F316 BNIB Branch fitting bw DN 15-40 ASTM A182-F316 BROB Branch outlet bw DN 150-200 ASTM A182-F316 RECB Reducer concentric bw DN 20-200 ASTM A403-WP316L REEB Reducer eccentric bw DN 20-200 ASTM A403-WP316L TERB Tee reducing bw DN 20-200 ASTM A403-WP316L

PIPING CLASS – 253451Z, , Page 2 of 5

Valves Data Sheet No. BTFF BTRF

VF.253451Z.21 Ball valve 17292 flgd VB.253451Z.21 Ball valve 17292 flgd


Trim: AISI 316, PEEK DDN 15-40 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK

BTFF VF.253451Z.22 Ball valve 14313 flgd DN 50-200 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK BTRF VB.253451Z.22 Ball valve 14313 flgd DN 50-200 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK CHVF VC.253451Z.21 Check valve flgd (Piston lift type) DN 15-40 Body: ASTM A182-F316/A351-CF8M CHVF VC.253451Z.22 CHVF VC.253451Z.23

Check valve dual plate Lug type Check valve dual plate double flanged

DN 50-150 DN 200-200

Trim: AISI 316, Stellite 6 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6

GAVF VG.253451Z.21 Gate valve flgd DN 15-200 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 GLVF VL.253451Z.21 Globe valve flgd DN 15-200 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, Stellite 6 VDBT VDB.253451Z.21 Double block and bleed Valve DN 15-50 Body: ASTM A182-F316/A351-CF8M Trim: AISI 316, PEEK Miscellaneous GKSW Gasket spiral wound DN 15-200 AISI 316, graphite filled CS centring-/SS inner ring MTRR Meterrun DN 15-40 Alloy 400/AISI 316 end flanges ORFS Orifice flange set DN 50-200 ASTM A182-F316 STBT Studbolt with nuts --- ASTM A320-L7/A194-7 Studbolt with nuts(for insulated lines) ASTM A320-L7M/A194-7M




PIPING CLASS -253451Z, Page 3 of 5 PIPING COMPONENT Nominal pipe size 15 20 25 40 50 80 100 150 200 Item description MESC Pipe Pipe ---------------------------Note1---------------------------------- Note1 Flanges Blind flange ---------------------------Note1--------------------------------- Note1 Spectacle blind ---------------------------Note1--------------------------------- Note1 Welding neck flange ---------------------------Note1--------------------------------- Note1 Lapjoint flange 766520 8311 Fittings Cap bw ---------------------------Note1---------------------------------

---------------------------Note1--------------------------------- ---------------------------Note1--------------------------------- ---------------------------Note1---------------------------------

Note1 Elbow 45 deg bw Note1 Elbow 90 deg bw Note1 Tee equal bw Note1

Miscellaneous Gasket spiral wound ---------------------------Note1---------------------------------

--------------Note1----------- ----------Note1-------------

Note1 Meterrun Orifice flange set Note1 NOTE 1: NEW MESC NO. WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION

Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd

NOTE 1

Ball valve 14313 flgd Check valve dual plate double flgd Check valve dual plate Lug type Check valve flgd Piston lift type Gate valve flgd Globe valve flgd Double block and bleed Valve


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING/PIPING COMPONENT Run x Br RECB REEB TERB

20 x 15 Note 1 Note 1 Note 1 25 x 15 Note 1 Note 1 Note 1 25 x 20 Note 1 Note 1 Note 1 40 x 15 Note 1 Note 1 40 x 20 Note 1 Note 1 Note 1 40 x 25 Note 1 Note 1 Note 1 50 x 20 Note 1 Note 1 50 x 25 Note 1 Note 1 Note 1 50 x 40 Note 1 Note 1 Note 1 80 x 40 Note 1 Note 1 80 x 50 Note 1 Note 1 Note1

100 x 40 Note 1 Note 1 100 x 50 Note 1 Note 1 Note 1 100 200

X x

80 150

Note 1 Note 1

Note 1 Note 1

Note 1 Note 1



Branch Run pipe BNIF BNIP 15 40 - 40 Note 1 15 50 - 50 Note 1 15 80 - 200 Note 1 20 50 - 50 Note 1 20 80 - 100 Note 1 20 150 - 200 Note 1 25 80 - 80 Note 1 25 100 - 100 Note 1 25 150 - 200 Note 1 25 300 - 500 Note 1 40 80 - 80 Note 1 40 100 - 100 Note 1 40 150 - 150 Note 1 40 200 - 200 Note 1 50 100 - 200 Note 1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 130 Note 1 20 4 3/4 x 130 Note 1 25 4 7/8 x 140 Note 1 40 4 1 1/8 x 180 Note 1 50 8 1 x 180 Note 1 80 8 1 1/4 x 230 Note 1 100 8 1 1/2 x 300 Note 1 150 8 2 x 400 Note 1 200 12 2 x 440 Note1

Bolt spacer/spade DN nr Inch mm MESC number 15 4 3/4 x 140 Note 1 20 4 3/4 x 140 Note 1 25 4 7/8 x 160 Note 1 40 4 1 1/8 x 190 Note 1 50 8 1 x 200 Note 1 80 8 1 1/4 x 260 Note 1 100 8 1 1/2 x 330 Note 1 150 8 2 x 450 Note 1 200 12 2 x 500 Note 1


Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 Note 1 20 4 3/4 x 150 Note 1 25 4 7/8 x 150 Note 1 40 4 1 x 160 Note 1

Boltset orifice flange DN nr inch x mm MESC number 50 8 1 x 190 Note 1 80 8 1 1/4 x 240 Note 1 100 8 1 1/2 x 310 Note 1 150 8 2 x 410 Note 1 200 12 2 x 460 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS 258220X Design limits Temperature (°C) -29 0 50 100 125 150 180 Pressure (Bar ga) DN 15-200

365.7 365.7

365.7

365.7

365.7

365.7

365.7

Notes - -

Intended for Process drain & drain services. Design limits acc. to ASME B16.5 flange rating mat. grp 2.8 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).and ASME B31.3 allowable internal pressure, limited to applicable line conditions and bolting calculations as per ASME Sec VIII DIV.1 Appendix 2.



The use of dual plate check valves is considered most economical. Use swing check valves only where fouling and abrasion are negatively affecting their functionality ASTM A995 Gr.5A is used as casting material for super duplex stainless steel for valves,flanges,fittings and other pressure containing parts

- Valves shall not be used in Insulted lines due to bolting material constraints. Table of schedules

DN Schedule 15 40S 20 40S 25 40S 40 80S 50 80S 80 160

100 120 150 160 200 140

PIPING CLASS – 258220X, , Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600






ASTM A790-UNS S32750

Flanges BLFL Blind flange DN 15-200 ASTM A182 Grade F53 LJFL Lap joint flange DN 50-50 ASTM A182 Grade F53 SBFL Spectacle blind DN 15-150 ASTM A182 Grade F53 SPFL Spade DN 200-200 ASTM A182 Grade F53 SPRT Spacer ring DN 200-200 ASTM A182 Grade F53 WNFL Welding neck flange DN 15-200

ASTM A182 Grade F53

Fittings CAPB Cap bw DN 15-200 ASTM A815 Grade WPS32750 E45B Elbow 45 deg bw DN 15-200 ASTM A815 Grade WPS32750 E90B Elbow 90 deg bw DN 15-200 ASTM A815 Grade WPS32750 TEEB Tee equal bw DN 15-200

ASTM A815 Grade WPS32750

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIB Branch fitting bw DN 15-40 ASTM A182 Grade F53 BROB Branch outlet bw DN 150-200 ASTM A182 Grade F53 RECB Reducer concentric bw DN 20-200 ASTM A815 Grade WPS32750 REEB Reducer eccentric bw DN 20-200 ASTM A815 Grade WPS32750 TERB BNIF


DN 20-200 DN 50-50

ASTM A815 Grade WPS32750 ASTM A182 Grade F53

PIPING CLASS – 258220X, Page 2 of 5 Valves Data Sheet No. BAFF VF.258220X.21 BAFF VF.258220X.22


DN 15-40 DN 50-200


BARF VB.258220X.21 BARF VB.258220X.22


DN 15-40 DN 50-200


CHVF VC.258220X.21 CHVF VC.258220X.22


DN 15-40 DN 50-150

Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6 Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, Stellite 6





GLVF VL.258220X.21 Globe valve flgd DN 15-200



Body: ASTM A182-F53/A995 Grade 5A Trim: UNS32750, PEEK

Miscellaneous GKSW Gasket spiral wound DN 15-200 Super Duplex SS, graphite filled

CS centring-/Super Duplex SS inner ring MTRR Meterrun DN 15-40 UNS32750 ORFS Orifice flange set DN 50-200 ASTM A182-F53 STBT Studbolt with nuts --- ASTM A193-B16/A194-Gr.4


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING COMPONENTS PIPING CLASS -258220X , Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 Item description MESC Pipe Pipe Note 1 Flanges Blind flange Note1 Spectacle blind Note1 Welding neck flange Note1 Lap joint flange Note1 Fittings Cap bw Note1 Elbow 45 deg bw Note1 Elbow 90 deg bw Note1 Tee equal bw Note1 Valves Ball valve 17292 flgd Ball valve 17292 flgd Check valve flgd Check valve dual plate Lug type NOTE 1 Check valve dual plate double flgd Gate valve flgd Globe valve flgd Double block and bleed Valve. Miscellaneous Gasket spiral wound Note1 Meterrun Note1 Orifice flange set Note1 Strainer Y-type Note1 NOTE 1: NEW MESC NO, WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION



REDUCING / PIPING COMPONENTS Run x Br RECB REEB TERB

20 x 15 Note 1 Note 1 Note 1 25 x 15 Note 1 Note 1 Note 1 25 x 20 Note 1 Note 1 Note 1 40 x 15 Note 1 Note 1 40 x 20 Note 1 Note 1 Note 1 40 x 25 Note 1 Note 1 Note 1 50 x 20 Note 1 Note 1 50 x 25 Note 1 Note 1 Note 1 50 x 40 Note 1 Note 1 Note 1 80 x 40 Note 1 Note 1 80 x 50 Note 1 Note 1 Note1

100 x 40 Note 1 Note 1 100 x 50 Note 1 Note 1 Note 1 100 x 80 Note 1 Note 1 Note 1 150 x 50 Note 1 Note 1 Note 1 150 x 80 Note 1 Note 1 Note 1 150 x 100 Note 1 Note 1 Note 1 200 x 50 Note 1 Note 1 Note 1 200 x 80 Note 1 Note 1 Note 1 200 x 100 Note 1 Note 1 Note 1 200 x 150 Note 1 Note 1 Note 1


PIPING CLASS 258220X,Page 4 of 5

Branch Run pipe BNIF BNIP 15 40 - 40 Note 1 15 50 - 50 Note 1 15 80 - 200 Note 1 20 50 - 50 Note 1 20 80 - 200 Note 1 25 80 - 80 Note 1 25 100 - 200 Note 1 40 80 - 80 Note 1 40 100 - 200 Note 1 50 100 - 200 Note 1



BOLTING

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 140 Note 1 20 4 3/4 x 140 Note 1 25 4 7/8 x 160 Note 1 40 4 1 1/8 x 190 Note 1 50 8 1 x 200 Note 1 80 8 1 1/4 x 260 Note 1 100 8 1 1/2 x 330 Note 1 150 8 2 x 450 Note 1 200 12 2 x 500 Note 1 PIPING CLASS – 258220X, Page 5 of 5

Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 Note 1 20 4 3/4 x 150 Note 1 25 4 7/8 x 150 Note 1 40 4 1 x 160 Note 1 Boltset orifice flange DN nr inch x mm MESC number 50 8 1 x 190 Note 1 80 8 1 1/4 x 290 Note 1 100 8 1 1/2 x 310 Note 1 150 8 2 x 410 Note 1 200 12 2 x 460 Note 1

DN nr inch x mm MESC number 15 4 3/4 x 130 Note 1 20 4 3/4 x 130 Note 1 25 4 7/8 x 140 Note 1 40 4 1 1/8 x 180 Note 1 50 8 1 x 180 Note 1 80 8 1 1/4 x 230 Note 1 100 8 1 1/2 x 300 Note 1 150 8 2 x 400 Note 1 200 12 2 x 440 Note 1



CLASS 011502U Design limits Temperature (°C) -45 0 50 100 125 150 180 240 Pressure (Bar ga) DN 25-200

19.6 19.6 19.2 17.7 16.7 15.8 14.6 12.44

Notes

- -

Intended for Underground Glycol Drain service. Design limits acc. to ASME B16.5 flange rating mat. grp 1.1


when necessary for process/operating requirements - - - - - -

The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves only where fouling and abrasion are negatively affecting their functionality HIC testing to be done on CS welded pipe fabricated out of plates. Minimum line size for underground buried drain service is DN100. The buried metallic piping needs to be CP protected as per ADCO doc no. 58.99.38.1605 (Scope for CP system for Underground Piping) and Coated (thermally sprayed alumimium) as per ADCO Doc no. ES 30.99.00.0102.1(Corrosion and Material Selection Philosophy)

Table of schedules

DN Schedule 25 160 40 160 50 80 80 80

100 40 150 40 200 30

PIPING CLASS – 011502U , Page 1 of 5 Branch connections 90 degrees


25 40 50 80 100 150 200 250 300 350 400 450 500 600



Carbon steel LT F-Gr Sour Plant Qusahwira Phase II FEED Class no. 011502U Consignee ASME rating CLASS 150 Engineered by Snc Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395



ASTM A333-6

Flanges BLFL Blind flange DN 25-200 ASTM A350-LF2 SBFL Spectacle blind DN 25-200 ASTM A516-60/65/70 WNFL Welding neck flange DN 25-200 ASTM A350-LF2 Fittings CAPB Cap bw DN 25-200 ASTM A420-WPL6 E45B Elbow 45 deg bw DN 25-200 ASTM A420-WPL6 E90B Elbow 90 deg bw DN 25-200 ASTM A420-WPL6 TEEB Tee equal bw DN 25-200

ASTM A420-WPL6

Reducing fittings (Refer branch table for size range of all reducing branch fittings) BROB Branch outlet bw DN 150-200 ASTM A350-LF2 RECB Reducer concentric bw DN 25-200 ASTM A420-WPL6 REEB Reducer eccentric bw DN 25-200 ASTM A420-WPL6 TERB Tee reducing bw DN 25-200

ASTM A420-WPL6

PIPING CLASS – 011502U , Page 2 of 5 Valves Valve Data Sheet No.

BTFF VF.011502Z.21 Ball valve 17292 flgd DN 25-150 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, PEEK

BTFF VF.011502Z.22 Ball valve 14313 flgd DN 200-200 Body: ASTM A352-LCC Trim: AISI 316, PEEK

BTRF VB.011502Z.21 Ball valve 17292 flgd DN 25-150 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, PEEK

BTRF VB.011502Z.21 Ball valve 14313 flgd DN 200-200 Body: ASTM A352-LCC Trim: AISI 316, PEEK

CHDF VC.011502Z.23 Check valve dual plate double flgd DN 200-200 Body:ASTM A352-LCC/A352-LCC Trim:AISI 316,Stellite 6

CHVF VC.011502Z.21 Check valve (piston type) DN 25-40 Body:ASTM A350-LF2 /A352-LCC Trim:AISI 316,Stellite 6

CHDF VC.011502Z.22 Check valve dual plate Lug type DN 25-150 Body:ASTM A350-LF2 /A352-LCC Trim:AISI 316,Stellite 6

GAVF VG.011502Z.21 Gate valve flgd DN 25-200 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 GLVF VL.011502Z.21 Globe valve flgd DN 25-200 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 VDBT VDB.011502Z.21 Double block and bleed Valve DN 25-50

Body: ASTM A350-LF2 Trim: AISI 316, PEEK

Miscellaneous GKSW Gasket spiral wound DN 25-200 AISI 316, graphite filled CS centring-/SS inner ring ORFS Orifice flange set DN 25-200 ASTM A350-LF2




ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS – 011502U, Page 3 of 5 PIPING COMPONENTS Nominal pipe size 25 40 50 80 100 150 200 Item description MESC Pipe Pipe 743016

0381 0541 0611 0691 0751 0841 0931

Flanges Blind flange 766212 4661 4681 4701 4721 4741 4761 4781 Spectacle blind 768835 1161 1181 1201 1221 1241 1261 1281 Welding neck flange 766282 1861 1881 1601 1621 1141 1161 0581 Fittings Cap bw 763117 1821 1921 2101 2301 2461 2661 2831 Elbow 45 deg bw 763134 1821 1921 2101 2301 2461 2661 2831 Elbow 90 deg bw 763143 1821 1921 2101 2301 2461 2661 2831 Tee equal bw 763180 1821 1921 2101 2301 2461 2661 2831 Valves Ball valve 17292 flgd 770031 5051 5071 5081 5101 5121 5131 Ball valve 14313 flgd 770077 5151 Ball valve 17292 flgd 770031 0051 0071 0081 0101 0121 0131 Ball valve 14313 flgd 770077 0151 Check valve dual plate flgd 776720 0151 Check valve dual plate flgd NOTE 1 Check valve dual plate Lug type NOTE 1 Check valve (piston type) NOTE 1 Gate valve flgd 772033 0051 0071 Gate valve flgd 772041 3081 3101 3121 3141 3151 Globe valve flgd 773033 0051 0071 6091 6101 6121 6141 6151 Double block and bleed Valve NOTE 1 Miscellaneous Gasket spiral wound 854136 3081 3121 3141 3181 3201 3241 3261 Meter run 0561 0581 Orifice flange set 766297 1121 1131 0241 0261 0141 NOTE 1: NEW MESC NO WILL BE GENERATED, REFER CL.9.12 OF THIS SPECIFICATION


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications REDUCING/PIPING COMPONENTS


50 x 20 7631661931 7631751931 50 x 25 7631661991 7631751991 7631881111 50 x 40 7631662081 7631752081 7631881201 80 x 40 7631662291 7631752291 80 x 50 7631662371 7631752371 7631881331

100 x 40 7631662491 7631752491 100 x 50 7631662661 7631752661 7631881581 100 x 80 7631662761 7631752761 7631881701 150 x 50 7679050641 150 x 80 7629452941 7629602881 7631881811 150 x 100 7631663051 7631753051 7631881891 200 x 50 7679052631 200 x 80 7679052751 200 x 100 7631663241 7631753241 7631882111 200 x 150 7631663341 7631753341 7631882311


PIPING CLASS – 011502U, Page 4 of 5



ADCO 1.8 MMBOPD Expansion Short Form Material Class Specifications Qusahwira Full Field Development –Project P14364

BOLTING Boltset standard flange DN nr inch x mm MESC number 25 4 1/2 x 70 8138671551 40 4 1/2 x 80 8138671571 50 4 5/8 x 90 8138672711 80 4 5/8 x 100 8138672731 100 8 5/8 x 100 8138672731 150 8 3/4 x 110 8138673301 200 8 3/4 x 110 8138673301 Boltset meter run DN nr inch x mm MESC number 15 4 1/2 x 120 8138671641 20 4 1/2 x 120 8138671641 25 4 1/2 x 130 8138671661 40 4 1/2 x 130 8138671661 Boltset orifice flange DN nr inch x mm MESC number 50 8 5/8 x 130 8138672781 80 8 3/4 x 140 8138673351 100 8 3/4 x 150 8138673371 150 12 3/4 x 150 8138673371 200 12 7/8 x 170 8138674091

PIPING CLASS – 011502U, Page 5 of 5 Boltset blind/spacer DN nr inch x mm MESC number 25 4 1/2 x 80 8138671571 40 4 1/2 x 80 8138671571 50 4 5/8 x 100 8138672731 80 4 5/8 x 110 8138672741 100 8 5/8 x 110 8138672741 150 8 3/4 x 120 8138673321 200 8 3/4 x 130 8138673341





CLASS 151502Z Design limits Temperature (°C) -45 0 50 75 100 Pressure (Bar ga) DN 15 -100 219.5 219.5 219.5 219.5 219.5 Notes - Intended for Process Gas and Vent Gas Service. - Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 and ASME B31.3 allowable internal

pressure, and limited by allowable stress of bolting material - For bending of pipe see DEP 31.38.01.31-Gen. - For basis of design see DEP 31.38.01.10-Gen. - The use of red. bore ball valves is considered most economical. Use full bore ball valves only when

necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only Table of schedules

DN Schedule 15 XXS 20 XXS 25 XXS 40 XXS 50 160 80 160

100 160 150 160 200 160 250 160 300 160 350 160

Branch connections 90 degrees PIPING CLASS – 151502Z REV 2, Page 1 of 5

Branch Size

Run size

15 20 25 40 50 80 100 150 200 250 300 350



Carbon steel LT F-Gr Sour Plant : Qusahwira Phase II FEED Class no. 151502Z Consignee ASME rating CLASS1500 Engineered by Snc Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 ONV 2014 Project no. P14395



COMPONENT MATERIAL DESCRIPTION PIPING CLASS – 151502Z REV 2, Page 2 of 5 (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-350 ASTM A333-6 Flanges BLFL Blind flange DN 15-350 ASTM A350-LF2 LJFL SPNF

Lap joint flange Spade

DN 50-50 DN 15-350

ASTM A182 F316 ASTM A516-60/65/70

SBFL Spectacle blind DN 15-250 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-350 ASTM A350-LF2 Fittings CAPB Cap bw DN 15-350 ASTM A420-WPL6 E45B Elbow 45 deg bw DN 15-350 ASTM A420-WPL6 E90B Elbow 90 deg bw DN 15-350 ASTM A420-WPL6 TEEB Tee equal bw DN 15-350 ASTM A420-WPL6 Reducing fittings BNIB Branch fitting bw DN 15-40 ASTM A350-LF2 BNIF Branch fitting flgd DN 50-50 ASTM A350-LF2 RECB Reducer concentric bw DN 20-350 ASTM A420-WPL6 REEB Reducer eccentric bw DN 20-350 ASTM A420-WPL6 TERB Tee reducing bw DN 20-350 ASTM A420-WPL6

Valves BAFF VF.151502Z.21 Ball valve 17292 FB flgd DN 15-40 Body: ASTM A350-LF2 Trim: AISI 316,PEEK BARF VB.151502Z.21 Ball valve 17292 RB flgd DN 15-40 Body: ASTM A350-LF2 Trim: AISI 316, PEEK BTFF VF.151502Z.22 Ball valve 14313 flgd DN 50-350 Body: ASTM A352-LCC Trim: AISI 316, PEEK BTRF VB.151502Z.22 Ball valve 14313 flgd DN 50-350 Body: ASTM A352-LCC Trim: AISI 316, PEEK CHVF VC.151502Z.21 Check valve flgd (Piston lift type) DN 15-40 Body: ASTM A350-LF2

Trim: AISI 316, Stellite 6 CHVF VC.151502Z.22 Check valve Lug type DN 50-350 Body: ASTM A352-LCC

Trim: AISI 316, Stellite 6 GAVF VG.151502Z.21 Gate valve flgd DN 15-350 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 GLVF VL.151502Z.21 Globe valve flgd DN 15-350 Body: ASTM A350-LF2/A352-LCC Trim: AISI 316, Stellite 6 VDBT VDB.151502Z.21 Double block bleed valve DN 15-50 Body: ASTM A350-LF2 Trim: AISI 316, PEEK

Miscellaneous

GKSW Gasket spiral wound DN 15-350 AISI 316, graphite filled CS centring-/SS inner ring ORFS Orifice flange set DN 50-350 ASTM A350-LF2 STBT Studbolt with nuts --- ASTM A320-L7M/A194-7M



PIPING COMPONENTS PIPING CLASS – 151502Z REV 2, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 400 Item description MESC Pipe Pipe 743016 0251 0321 0401 0561 0631 0711 0791 Note1

Flanges Blind flange 766212 6581 6621 6661 6681 6701 6721 6741 Note1

Spacer ring 768847 7081 7121 7161 7181 7201 7221 7241 Note1

Welding neck flange 766286 7021 7041 7061 7081 6701 6721 6741 Note1 Lap joint flange 766520 8131 Fittings Cap bw 763117 1731 1791 1831 1931 2121 2321 2521 Note1

Elbow 45 deg bw 763134 1731 1791 1831 1931 2121 2321 2521 Note1

Elbow 90 deg bw 763143 1731 1791 1831 1931 2121 2321 2521 Note1

Tee equal bw 763180 1731 1791 1831 1931 2121 2321 2521 Note1

Miscellaneous Gasket spiral wound 854136 2041 2061 2081 2121 2141 2181 2201 Note1 Meterrun 766496 0821 0841 0861 0881 Orifice flange set 766297 3271 3281 3291 Note1

Valves Ball valve 14313 flgd Please refer respective valve data sheet no. specified on sheet no.2 of 5 of piping class 151502Z Ball valve 17292 FB flgd Please refer respective valve data sheet no. specified on sheet no.2 of 5 of piping class 151502Z Ball valve 14313 flgd Please refer respective valve data sheet no. specified on sheet no.2 of 5 of piping class 151502Z Ball valve 17292 flgd Please refer respective valve data sheet no. specified on sheet no.2 of 5 of piping class 151502Z Check valve dual plate Lug type Please refer respective valve data sheet no. specified on sheet no.2 of 5 of piping class 151502Z Check valve flgd Piston lift type Please refer respective valve data sheet no. specified on sheet no.2 of 5 of piping class 151502Z Gate valve flgd Please refer respective valve data sheet no. specified on sheet no.2 of 5 of piping class 151502Z Globe valve flgd Please refer respective valve data sheet no. specified on sheet no.2 of 5 of piping class 151502Z Double block bleed valve

Please refer respective valve data sheet no. specified on sheet no.2 of 5 of piping class 151502Z



REDUCING/PIPING COMPONENTS PIPING CLASS – 151502Z REV 2 , Page 4 of 5 Run x Br BROB RECB REEB TERB

20 x 15 7631661421 7631751421 7631880401 25 x 15 7631661521 7631751521 7631880501 25 x 20 7631661621 7631751621 7631880601 40 x 15 7631661721 7631751721 40 x 20 7631661821 7631751821 7631880801 40 x 25 7631661921 7631751921 7631880901 50 x 20 7629451951 7629601951 50 x 25 7631662031 7631752031 7631881121 50 x 40 7631662131 7631752131 7631881211 80 x 40 7631662331 7631752331 80 x 50 7631662411 7631752411 7631881341

100 x 40 7631662571 7631752571 100 x 50 7631662711 7631752711 7631881551 100 x 80 7631662811 7631752811 7631881671


Branch Run pipe BNIB BNIF 15 40 - 100 7680311291 7680378411 20 50 - 50 7680311321 7680378421 20 80 - 100 7680311271 7680378441 25 80 - 100 7680311231 7680378481 40 80 - 80 7680311211 7680378521 40 100 - 100 7680311191 7680378531 50 80 - 100 Note1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 8138673301 20 4 3/4 x 120 8138673321 25 4 7/8 x 130 8138674031 40 4 1 x 140 8138674691 50 8 7/8 x 150 8138674061 80 8 1 1/8 x 180 8138675331 100 8 1 1/4 x 200 8138675881 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 8138673371 20 4 3/4 x 150 8138673371 25 4 7/8 x 150 8138674061 40 4 1 x 160 8138674721 Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 8138674071 80 8 1 1/8 x 190 8138675351 100 8 1 1/4 x 210 8138675951

Boltset blind/spacer DN nr inch x mm MESC number 15 4 3/4 x 120 8138673321 20 4 3/4 x 130 8138673341 25 4 7/8 x 140 8138674041 40 4 1 x 160 8138674721 50 8 7/8 x 170 8138674091 80 8 1 1/8 x 210 8138675381 100 8 1 1/4 x 230 8138675981

PIPING CLASS – 151502Z REV 2 , Page 5 of 5



CLASS 091441Y Design limits Temperature (°C) 0 50 100 120 Pressure (Bar ga) DN 15- 250 142.7 141.2 139.8 137.9 DN 300- 350 139.6 139.6 139.6 137.9 Notes - Intended for drain,vent Gas ,Nitrogen & process oil services

Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 (ASME B16.5 up to DN 600 and B16.47 for larger sizes).and ASME B31.3 allowable internal pressure, and limited by allowable stress of bolting material


when necessary for process/operating requirements - Piston type check valves (DN 15-40) for horizontal mounting only - - The use of dual plate check valves is considered most economical. Use swing check valves only

where fouling and abrasion are negatively affecting their functionality

Table of schedules

DN Schedule 15 8.1 mm 20 8.32 mm 25 XXS 40 XXS 50 XXS 80 XXS

100 160 150 160 200 140 250 140 300 120 350 120

PIPING CLASS – 091441Y, Page 1 of 5 Branch connections 90 degrees Branch Size Run size

15 20 25 40 50 80 100 150 200 250 300 350



Carbon steel Sour Plant Qusahwira Phase II FEED Class no. 091441Y Consignee ASME rating CLASS 900 Engineered by Snc Lavalin International Corrosion allowance 6 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 NOV 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 15-350 ASTM A106-B Flanges BLFL Blind flange DN 15-350 ASTM A105N SBFL Spectacle blind DN 15-150 ASTM A516-60/65/70 SPFL Spade DN 200-350 ASTM A516-60/65/70 SPRT Spacer ring DN 200-350 ASTM A516-60/65/70 WNFL Welding neck flange DN 15-350 ASTM A105N LJFL Lap Joint flange DN 40-40 ASTM A182 F316 Fittings CAPB Cap bw DN 15-350 ASTM A234-WPB E45B Elbow 45 deg bw DN 15-350 ASTM A234-WPB E90B Elbow 90 deg bw DN 15-350 ASTM A234-WPB TEEB Tee equal bw DN 15-350 ASTM A234-WPB Reducing fittings (Refer branch table for size range of all reducing branch fittings) BNIF Branch fitting flgd DN 25-50 ASTM A105N BNIB Branch fitting bw DN 15-40 ASTM A105N BROB Branch outlet bw DN 150-350 ASTM A105N RECB Reducer concentric bw DN 20-350 ASTM A234-WPB REEB Reducer eccentric bw DN 20-350 ASTM A234-WPB TERB Tee reducing bw DN 15-350

ASTM A234-WPB

PIPING CLASS – 091441Y, Page 2 of 5 Valves Data Sheet No. BTFF VF.091441X.21 BTRF VB.091441X.21


DN15-40 DN15-40

Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PEEK Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, PEEK

BTFF VF.091441X.22 Ball valve 14313 flgd DN 50-350


BTRF VB.091441X.22 Ball valve 14313 flgd DN 50-350



Body: ASTM A216-WCB/WCC Trim: Alloy 825, Stellite 6


Check valve flgd (Piston lift type) Check valve dual plate Lug type Check Valve Swing

DN 15-40 DN 50-150 DN 50-150

Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6 Body: ASTM A105/A216-WCB/WCC

Trim: Alloy 825, Stellite 6



GLVF VL.091441X.21

Globe valve flgd

DN 15-150


NDVF VN.091441X.21 Needle valve flgd DN 15-15 Body: ASTM A105/A216-WCB/WCC Trim: Alloy 825, Stellite 6


Body: ASTM A150 Trim: Alloy 825, PEEK




ASTM A105 For DN 50-50 (1500Lbs)

ST3B Strainer Y-type (3 mm ca) DN 50-350 Sieve: UNS S32750/S32760 STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM



PIPING COMPONENTS PIPING CLASS -091441Y, Page 3 of 5 Nominal pipe size 15 20 25 40 50 80 100 150 200 250 300 350 Item description MESC Pipe Pipe NOTE 1 Flanges Blind flange NOTE 1 Spacer ring NOTE 1 Spade NOTE 1 Spectacle blind NOTE 1 Welding neck flange NOTE 1 Lap joint flange NOTE 1 Fittings Cap bw NOTE 1 Elbow 45 deg bw NOTE 1 Elbow 90 deg bw NOTE 1 Tee equal bw NOTE 1 Valves Ball valve 17292 flgd Ball valve 17292 flgd Ball valve 14313 flgd


Ball valve 14313 flgd NOTE 1 Check valve dual plate flgd NOTE 1 Check valve flgd Piston lift type NOTE 1 Check valve dual plate double flgd NOTE 1 Gate valve flgd NOTE 1 Globe valve flgd NOTE 1 Double block and bleed Valve NOTE 1 Needle valve flgd NOTE 1 Miscellaneous Gasket spiral wound NOTE 1 Meterrun NOTE 1

Orifice flange set NOTE 1 Strainers

NOTE 1

Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.9.12 OF THIS SPECIFICATION




20 x 15 NOTE 1 25 x 15 NOTE 1 25 x 20 NOTE 1 40 x 15 NOTE 1 40 x 20 NOTE 1 40 x 25 NOTE 1 50 x 20 NOTE 1 50 x 25 NOTE 1 50 x 40 NOTE 1 80 x 40 NOTE 1 80 x 50 NOTE 1

100 x 40 NOTE 1 100 x 50 NOTE 1 100 x 80 NOTE 1 150 x 50 NOTE 1 150 x 80 NOTE 1 150 x 100 NOTE 1 200 x 50 NOTE 1 200 x 80 NOTE 1 200 x 100 NOTE 1 200 x 150 NOTE 1 250 x 50 NOTE 1 250 x 80 NOTE 1 250 x 100 NOTE 1 250 x 150 NOTE 1 250 x 200 NOTE 1 300 x 50 NOTE 1 300 x 80 NOTE 1 300 x 100 NOTE 1 300 x 150 NOTE 1 300 x 200 NOTE 1 300 x 250 NOTE 1 350 x 50 NOTE 1 350 x 80 NOTE 1 350 x 100 NOTE 1 350 x 150 NOTE 1 350 x 200 NOTE 1 350 x 250 NOTE 1 350 x 300 NOTE 1


.


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications PIPING CLASS -091441Y, Page 4 of 5

BOLTING Boltset standard flange DN nr inch x mm MESC number 15 4 3/4 x 110 NOTE 1 20 4 3/4 x 120 NOTE 1 25 4 7/8 x 130 NOTE 1 40 4 1 x 140 NOTE 1 50 8 7/8 x 150 NOTE 1 80 8 7/8 x 150 NOTE 1 100 8 1 1/8 x 180 NOTE 1 150 12 1 1/8 x 200 NOTE 1 200 12 1 3/8 x 230 NOTE 1 250 16 1 3/8 x 240 NOTE 1

300 20 1 3/8 x 260 NOTE 1 350 20 1 1/2 x 280 NOTE 1 Boltset meter run DN nr inch x mm MESC number 15 4 3/4 x 150 NOTE 1 20 4 3/4 x 150 NOTE 1 25 4 7/8 x 150 NOTE 1 40 4 1 x 160 NOTE 1

Boltset orifice flange DN nr inch x mm MESC number 50 8 7/8 x 160 NOTE 1 80 8 7/8 x 160 NOTE 1 100 8 1 1/8 x 190 NOTE 1 150 12 1 1/8 x 210 NOTE 1 200 12 1 3/8 x 250 NOTE 1 250 16 1 3/8 x 260 NOTE 1 300 20 1 3/8 x 290 NOTE 1 350 20 1 1/2 x 310 NOTE 1

PIPING CLASS -091441Y, Page 5 of 5

Branch Run pipe BNIF BNIP 15 40 - 350 NOTE 1 20 50 - 50 NOTE 1 20 80 - 150 NOTE 1 20 200 - 350 NOTE 1 25 80 - 250 NOTE 1 25 300 - 350 NOTE 1 40 80 - 80 NOTE 1 40 100 - 200 NOTE 1 40 250 - 350 NOTE 1 50 80 - 350 NOTE 1


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications CLASS JA10 Design limits Temperature (°C) 0 50 75 93 Pressure (Bar ga) DN 50-150

345 345 345 345

Notes - - -

Intended for Process oil service. Design limit acc to API 5000. Refer Chapter IX of ASME B31.3 (2008) for design, Inspection, testing requirements. Flanges as per API 6A, TYPE 6B.

- All piping material to qualify NACE MR 0175 Requirement - -

For General Notes to PMS ,refer Cl.23 of this specification. Flange Adapter shall be used for transition from API class Flange to ASME Flanges.

Table of schedules

DN Schedule 50 XXS 80 XXS

100 XXS 150 23.2

PIPING CLASS – JA10, , Page 1 of 5

Carbon steel Sour Plant Qusahwira Phase II FEED Class no. JA10 Consignee API rating CLASS API 5000 Engineered by Snc Lavalin International Corrosion allowance 3 mm ADCO Contr. job no. 15662.01 Revision letter 1 Revision date 20 APRIL 2014 Project no. P14395


ADCO Qusahwira Phase II – Project P14395 Short Form Material Class Specifications COMPONENT MATERIAL DESCRIPTION (For full material description see relevant MESC buying description.) Pipe PIPE Pipe DN 50-150 ASTM A106-B Flanges BLFL Blind flange DN 50-150 API 60K SBFL Spectacle blind DN 50-150 ASTM A516-60/65/70 WNFL Welding neck flange DN 50-150 API 60K Fittings E45B Elbow 45 deg bw DN 50-150 ASTM A234-WPB E90B

Elbow 90 deg bw

DN 50-150

ASTM A234-WPB

Reducing fittings ( Refer branch table for size range of all reducing branch fittings) RECB Reducer concentric bw DN 50-150 ASTM A234-WPB REEB Reducer eccentric bw DN 50-150 ASTM A234-WPB TERB

Tee reducing bw

DN50-150

ASTM A234-WPB

PIPING CLASS – JA10 , , Page 2 of 5 Valves Data Sheet No. Miscellaneous GKSW Gasket, Octagonal Ring DN 50-150 API 6A, AISI 316, ANNEALED STBT Studbolt with nuts --- ASTM A193-B7M/A194-2HM


ADCO Qusahwira Phase II – Project P14395


PIPING CLASS-JA10, Page 3 of 5 PIPING COMPONENTS Nominal pipe size

50 80 100 150

Item description MESC

Flanges Welding neck Flange Note1 Note1 Note1 Note1 Fittings Elbow 45 deg bw 763034 6131 6331 Note1 Note1 Elbow 90 deg bw 763042 6131 6331 Note1 Note1 Miscellaneous Gasket Octagonal Ring Note1 Note1 Note1 Note1

Note 1: NEW MESC NO. WILL BE GENERATED , REFER CL.11.11 OF THIS SPECIFICATION.

Pipe Pipe 743003 0751 1151 Note1 Note1



Short Form Material Class Specifications REDUCIING /PIPING COMPONENTS Run x Br BROB RECB REEB TERB

80 x 50 NOTE1 NOTE1 NOTE1 100 x 40 NOTE1 NOTE1 100 x 50 NOTE1 NOTE1 NOTE1 100 x 80 NOTE1 NOTE1 NOTE1 150 x 50 NOTE1 150 x 80 NOTE1 NOTE1 NOTE1 150 x 100 NOTE1 NOTE1 NOTE1


PIPING CLASS JA10 , Page 4 of 5



Short Form Material Class Specifications PIPING CLASS-JA10, Page 5 of 5 BOLTING Boltset standard flange DN nr inch x mm MESC number 50 8 7/8 x 160 Note1 80 8 1 1/8 x 190 Note1 100 8 1 1/4 x 210 Note1 150 12 1 3/8 x 270 Note1 Boltset blind/spacer DN Nr inch x mm MESC number 50 8 7/8 x 270 Note1 80 8 1 1/8 x 300 Note1 100 8 1 1/4 x 320 Note1 150 12 1 3/8 x 400 Note1


APPENDIX – 3

Material of Construction for Valves



PAGE: 1 OF 9


ADCO Document No. 58.99.12.0603 Appendix 3Revision 1

Page 2 of 9

Material Class Valve Type Valve Body Plug/Disc/ Wedge/Ball Stem/Trunnion Hard Facing Soft Seats Packing Body Gaskets Bolting Remarks Notes

Gate, Globe, Check, & Needle Valves

A105N / A216 WCB/WCC 316SS 316SS Stellite 6 NO

Diagonal braided graphite yarn /

Preformed compressed

graphite

Graphite with tanged insert A193 B7 / A194 2H (2.2)

Ball Valves A105N / A216 WCB/WCC 316SS 316SS NO

PTFE up to Class 300 / Devlon V

Class 600

Viton 'B' or graphite


Double Block & Bleed Valve A350 LF2 316SS 316SS NO


Class 600



A105N / A216 WCB/WCC

Super Duplex UNS S32750 / UNS S32760


Stellite 6 NO



graphite

Graphite with tanged insert A193 B7M / A194 2HM Sour Service (2.1)(2.2)(2.3)

Ball Valves A105N / A216 WCB/WCC



NO


Class 600 / PEEK Class 900+


Graphite with tanged insert A193 B7M / A194 2HM Sour Service (2.1) (2.2)(2.3)

Double Block & Bleed Valve A350 LF2



NO


Class 600 / PEEK Class 900+



Materials of Construction

FEED FOR QUSAHWIRA PHASE II DEVELOPMENT PROJECT DETAILS OF VALVE CONSTRUCTION

011412Z 061412Z

011440Y 061440Y 151440Y


Page 3 of 9








Stellite 6 NO



graphite

Graphite with tanged insert A193 B7M / A194 2HM Sour Service (2.1)(2.2)

Ball Valves A105N / A216 WCB/WCC



NO

PTFE for Class 300 / Devlon V

Class 600 / PEEK Class 150 & 900+


Graphite with tanged insert A193 B7M / A194 2HM Sour Service (2.1) (2.2)(2.9)

Double Block & Bleed Valve A350 LF2



NO

PTFE for Class 300 / Devlon V

Class 600 / PEEK Class 150 & 900+




A105N / A216 WCB/WCC Alloy 825 Inconel 718 Stellite 6 NO



graphite


Ball Valves A105N / A216 WCB/WCC Alloy 825 Inconel 718 NO

PTFE up to Class 300 / PEEK Class

900+


Graphite with tanged insert A193 B7M / A194 2HM Sour Service (2.1) (2.2)

Double Block & Bleed Valve A350 LF2 Alloy 825 Inconel 718 NO

PTFE up to Class 300 / PEEK Class

900+



011440Z 011440U031440U061440U091440U251440U

011441X 031441X 091441X 151441X


Page 4 of 9





A350 LF2 / A352 LCC 316SS 316SS Stellite 6 NO



graphite

Graphite with tanged insert A320 L7M / A194 7M Sour Service (2.1)(2.2)

Ball Valves A350 LF2 / A352 LCC 316SS 316SS NO

PTFE for Class 300 / PEEK for

class150 and Class 600+


Graphite with tanged insert A320 L7M / A194 7M Sour Service (2.1) (2.2)

Double Block & Bleed Valve A350 LF2 316SS 316SS NO






A350 LF2 / A352 LCC Alloy 825 Inconel 718 Stellite 6 NO



graphite


Ball Valves A350 LF2 / A352 LCC Alloy 825 Inconel 718 NO

PTFE Class 300 / PEEKClass

150,600


Graphite with tanged insert A320 L7M / A194 7M Sour Service (2.1) (2.2)(2.9)

Double Block & Bleed Valve A350 LF2 Alloy 825 Inconel 718 NO

PTFE Class 300 / PEEKClass

150,600


Graphite with tanged insert A320 L7M / A194 7M Sour Service (2.1)(2.2)(2.9)


A350 LF2 / A352 LCC Alloy 825 Inconel 718 Stellite 6 NO



graphite


Ball Valves A350 LF2 / A352 LCC Alloy 825 Inconel 718 Stellite 6 NO Viton 'B' or

graphiteGraphite with tanged insert A320 L7M / A194 7M Sour Service (2.1) (2.2)

Double Block & Bleed Valve A350 LF2 Alloy 825 Inconel 718 NO PEEK Viton 'B' or

graphiteGraphite with tanged insert A320 L7M / A194 7M Sour Service (2.1)(2.2)

011503Z 031503Z

251503Z

011502Z031502Z061502Z091502Z151502Z011502U


Page 5 of 9





A182 F316/ A351 CF8M 316SS 316SS Stellite 6 NO



graphite


Ball Valves A182 F316/ A351 CF8M 316SS 316SS NO


Class 600+




A182 F316/ A351 CF8M Monel K500 Inconel 718 Stellite 6 NO



graphite

Graphite with tanged insert A320 L7M / A194 7M Sour Service (2.1)(2.2)(2.6)

Ball Valves A182 F316/ A351 CF8M Monel K500 Inconel 718 NO PTFE Viton 'B' or

graphiteGraphite with tanged insert A320 L7M / A194 7M Sour Service (2.1) (2.2)(2.6)

Double Block & Bleed Valve A182 F316 Monel K500 Inconel 718 NO PTFE Viton 'B' or

graphiteGraphite with tanged insert A320 L7M / A194 7M Sour Service (2.1)(2.2)(2.6)

013411Z 093411Z 253411Z

013421X 033421X


Page 6 of 9





B564 N08825 Alloy 825 / A494

Cu5-MCuCAlloy 825 Inconel 718 Stellite 6 NO



graphite

Graphite with tanged insert A320 L7M / A194 7M Sour Service

(2.1)(2.2) Use A350 LF2 / A352 LCC

body with UNS 08825 cladding for DN 200 up

Ball ValvesB564 N08825

Alloy 825 / A494 Cu5-MCuC

Alloy 825 Inconel 718 NO PTFE Viton 'B' or graphite

Graphite with tanged insert A320 L7M / A194 7M Sour Service

(2.1) (2.2) Use A350 LF2 / A352 LCC body with

UNS 08825 cladding for DN 200 up

Double Block & Bleed Valve

B564 N08825 Alloy 825 Alloy 825 Inconel 718 NO PTFE Viton 'B' or

graphiteGraphite with tanged insert A320 L7M / A194 7M Sour Service (2.1)(2.2)


B564 N08825 Alloy 825 / A494

Cu5-MCuCAlloy 825 Inconel 718 Stellite 6 NO



graphite

Graphite with tanged insert A193 B7M / A194 2HM Sour Service

(2.1)(2.2) Use A350 LF2 / A352 LCC body with UNS 08825 cladding for DN 200

up

Ball ValvesB564 N08825

Alloy 825 / A494 Cu5-MCuC

Alloy 825 Inconel 718 NO PTFE Viton 'B' or graphite

Graphite with tanged insert A193 B7M / A194 2HM Sour Service

(2.1) (2.2) Use A350 LF2 / A352 LCC body with UNS 08825 cladding for DN 200

up


B564 N08825 Alloy 825 Alloy 825 Inconel 718 NO PTFE Viton 'B' or

graphiteGraphite with tanged insert A193 B7M / A194 2HM Sour Service (2.1)(2.2)

017011U

016620X036620X


Page 7 of 9




Gate, Globe, Check, & Needle Valves B148 C95200 B148 C95800 B150 Gr C63200 NO NO



graphite

Graphite with tanged insert A193 B7 / A194 2H -

Soft seat for check valve only

(2.2)(2.4)

Ball Valves B148 C95200 B148 C95800 B150 Gr C63200 NO PTFE, PFA Viton 'B'or graphite

Graphite with tanged insert A193 B7 / A194 2H - (2.2)(2.4)

Butterfly Valves


lined with Chloroprene

Rubber or EPDM

B148 C95800 B150 Gr C63200 NO Chloroprene Rubber / EPDM

Chloroprene Rubber / EPDM

EPDM Shore 60A A193 B7 / A194 2H - (2.2)

Post Indicator Butterfly Valves

A105N/A216WCB/WCC lined with

Chloroprene Rubber or EPDM

B148 C95800 B150 Gr C63200 NO Chloroprene Rubber/EPDM

Chloroprene Rubber/EPDM

EPDM Shore 60A A193 B7 / A194 2H - (2.2)

017015U


Page 8 of 9





B148 Gr C95200 Aluminum Bronze B148 C95800 B150 Gr C63200 NO NO Diagonal braided

graphite yarnGraphite with tanged insert A193 B7 / A194 2H

Soft seat for check valve only (2.2)

Ball Valves B148 Gr C95200 Aluminum Bronze B148 C95800 B150 Gr C63200 NO PTFE Viton 'B' or

graphiteGraphite with tanged insert A193 B7 / A194 2H (2.2)(2.4)


B148 Gr C95200 Aluminum Bronze B148 C95800 B150 Gr C63200 NO PTFE Viton 'B' or

graphiteGraphite with tanged insert A193 B7 / A194 2H (2.2)

Butterfly ValvesA105N /

A216 WCB/WCC lined with

B148 C95800 B150 Gr C63200 NO Chloroprene Rubber / EPDM

Chloroprene Rubber / EPDM Graphite fiber A193 B7 / A194 2H (2.2)


A182 Gr F53 or Gr F55/ A995 Gr. 5A



Stellite 6 NO



graphite

Graphite with tanged insert

A193 B7M / A194 2HM&

(For 258220X) A193 B16 / A194 Gr. 4

Sour Service (2.1)(2.2)(2.7)

Ball Valves A182 Gr F53 or Gr F55/ A995 Gr. 5A



NO





A193 B7M / A194 2HM&

(For 258220X) A193 B16 / A194 Gr. 4

Sour Service (2.1)(2.2)(2.7)


A182 Gr F53 or Gr F55



NO





A193 B7M / A194 2HM&

(For 258220X) A193 B16 / A194 Gr. 4

Sour Service (2.1)(2.2)(2.7)


A182 F316 / A351 CF8M 316SS 316SS Stellite 6 NO



graphite

Spiral Wound 316 Graphite

filled

A320 B8M /A194 8MA&

(For 253451Z A320 L7/ A194 Gr.7)

Sour Service (2.1)(2.2)(2.5)(2.6)

Ball Valves A182 F316 / A351 CF8M 316SS 316SS NO PEEK Viton 'B' or

graphite


filled

A320 B8M /A194 8MA&

(For 253451Z) A320 L7/ A194 Gr.7

Sour Service (2.1) (2.2)(2.5)(2.6)

Double Block & Bleed Valve A182 F316 316SS 316SS NO PEEK Viton 'B' or

graphite


filled

A320 B8M /A194 8MA&

(For 253451Z) A320 L7/ A194 Gr.7

Sour Service (2.6)(2.1)(2.2)(2.5)

NOTES:

018220X038220X068220X098220X158220X258220X

063451Z 093451Z 153451Z 253451Z

018011X


Page 9 of 9




1. General notes1.1 In addition to above, the requirements of valve material/NDT and certification shall be as per MESC specification 77/302.1.2 Additional requirement shall be followed as per MESC specification listed in Piping Material specification in addition to clause 16 of it .1.2.1 Flange surface finish to comply to MESC SPE 76/0011.2.2 Pressure testing in accordance to BS 6755 Part 1, manufacturing Standard of valves and respective MESC SPE's1.2.3 Fire safe test as per API 6FA.

2. Specific notes2.1 All materials shall conform to NACE MR0175/ISO 15156 (Latest).2.2 All CS and AS Bolts & Nuts to be coated with Takecoat 1000 or Xylan 1070 .

2.4 Flanged Aluminium Bronze Valves in Piping class 017015U & 018011X shall be of 300# rating.2.5 For Pipe class 253451Z bolts for valves in insulated lines shall be A320 L7M & A 194 Gr. 7M 2.6 Stainless steel body material to be dual certified 316/316L2.7 Valves in pipeclass 258220X shall be used only in uninsulated lines due to Bolting Material constraints.

2.3 Carbon steel valves used in pipe classes having corrosion Allowance greater than 3.0mm,shall have minimum wall thickness increased in accordance with ASME B16.34 as noted on the valve Data Sheet.

Date post:	02-Mar-2021
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times