Tablet Press

7/25/2019 Tablet Press

1/14


2/14

Sejong Pharmatech is confident in its own best quality.

Sejong Pharmatech is the enterprise that certificated ISO 9001, QMS (Quality Management System), and ISO 14001,

EMS(Environment Management System) from International Organization for Standardization.

Sejong Pharmatech provides the products which are appropriate for GMP principle of each country. All production

equipment of Sejong Pharmatech obtained CE mark and realized safety of products.

Also, Sejong Pharmatech supplies the best products by various test and performance examination at the own Tech-

Centre before all manufactured products are delivered to the customers.

The aims of this quality assurance system are cost reduction and improvement of productivity by providing the highest

quality equipment for our customers to manufacture the best products at the same time.

In addition, all manufacturing devices of Sejong Pharmatech are made by considering the most necessary part in

pharmaceutical industry and engineering experts of Sejong Pharmatech satisfy customersneeds with i mpeccable

technical service.

Sejong Pharmatech has advanced technology for the development and production of a broad range of pharmaceutical

machines to enable Sejong Pharmatech to ser ve the global pharmaceutical market.

Quality Assurance

Contents04 Rotary Tablet Press

05 STRUCTURE

11GRC-S Series

12 Product Specification

13 Dimensions with Layout

14MRC-S Series



17MRC-D Series 18 Product Specification


20HRC-S Series



23 Option Items

26Machine Details


3/14

As a key product of Sejong Pharmatech, the rotary tablet press has a competitive edge in the global

market.Sejong Pharmatech's rotary tablet press line includes the GRC series, MRC series, and HRC series and canaccess real-time based production data management with HMI system. Also, it embraces the features ofthe most efficient cutting-edge technologies to ensure optimum tablet production.

All rotary tablet presses in the line are designed to be modified and adjusted in a variety of ways and tomeet optimum production efficiency and quality conditions.They are designed to maintain optimum conditions for essential production conditions such as thicknessand hardness of tablet in order to ensure maximum tablet production. In particular, they are designed to

be compatible with GMP standards in other countries, and produced in accordance with thorough andstrict quality control criteria. We have obtained CE Mark certification from TUV-PC, Germany to achievequality standardization of all production equipment.

Rotary Tablet Press

04 I Rotary Tablet Press

Rotary Tablet Press

Rotary Tablet Press I 05

It is composed in a simple and easy structure of a panel PC with a large 15-inch

touch screen, and easy-to-access UI (User Interface).

Also the perfect data collection through HMI system is able to provide

customers with real-time-based production data.

It ensures more stable production through data storage

and management functions. And it offers easier control over equipment

operation

i.e. the applied safety drive function displays an error report in case

of malfunction or problems, thereby allowing operators to tackle any problem

HMI System

Sejong Pharmatech

Supervising Function

Function to determine the operating rights depending

on supervisors' levels.

Reporting Function

Function to enable users to check various production data by

different products, manufacture' s serial numbers, users, etc.

STRUCTURE

Best Solution for Tablet Application


4/14

STRUCTURE

Sejong Pharmatech


Rotary Tablet Press

The computer-controlled automatic weight control system

can produce tablets of more accurate quantities.

The discharge chute is equipped with a rejection gate that can

discharge defective tablets generated by an initial operation of

the equipment and by AWC system as well as a sampling gate

that can automatically discharge samples in accordance with

setup values during the sampling test.

In addition, we modified the holding handle to make it easy to

attach and detach, maximizing the convenience of repair and

maintenance.

Automatic Weight Control System

and Discharge Chute

AWC Parameter

Function to enter manufacturing information such as the upper and

lower limit of thickness, weight, and others for accurate operation of

automatic weight control system.

Monitoring of AWC System

A screen that shows whether or not tablet production is carried out

within the frame of standard values of entered target tablet

production through graphs.

Mounted to adjust tablet weight, the weight rail is designed to

modulate the height of the device by a motor from the touch screen. If

the lower punch fails to move smoothly over the disk hall, it couldcause serious damage to the system.

So all automatic rotary tablet presses are equipped with punch tight

rail and road cell to detect any inappropriate move, thereby perfectly

preventing rails and punches from being damaged.

Also, weight rail assembly is easy to disassemble and assemble for

convenient maintenance and repair.

Weight Rail and Lower Pu nch Tight

If the ejection force exceeds the standard values, it can cause a

machine breakdown with the punch getting jammed in the disk.

To solve the problem, Sejong Pharmatech has installed a road-

cell to detect any inappropriate movement of the lower punch

in the disk hall so as to prevent rails and punches from being

damaged.

Ejection Force

Option

MRC-D Series

Tightness

A window through to show the upper punch tight, the

lower punch tight and ejection force (Discharge pressure).

The upper down rail has a punch tight rail that can detect any

bumpiness of the lower punch in the disk hall and a load-cell

to protect the upper rails and punches from being damaged.

Also, through an automatic lubricator installed at the lower

part of the machine, there is an automatic oil supply line to

protect the upper punch and the rail.

You can control them through the display panel.

Upper Tight

and Upper Lubrication System

Rotary Tablet Press I 07


5/14

STRUCTURE

Rotary Tablet Press Sejong Pharmatech

STRUCTURE


By simplifying the assembly of the connection between powder hopper

and mechanical feeder, it is easier to check the powder supply status

through transparent acrylic pipe and sensors and automatically provides

powder in case of machinery stoppage or the attachment of powder

loading system (option).

You can easily mount and dismount a mechanical feeder by releasing the

left and right handles, wh ile improving assembly method of the

mechanical feeder stand to achieve simple disassembly and assembly, time

saving for easy maintenance and repair

Mechanical Feeder

Sejong's unique disk-lifting device developed to improve customer productivity at lower costs can replace disk, punch, and rail once

without an additional main machine.

Also, this equipment has reduced by more than 20% disk replacement time compared with the previous model.

Disk Change System

Exclude Model

GRC-S Series

Disk Change Set-up Function

Function to aid easy disk replacement, by setting up the top height

value of upper pressure roll, the top height value of disk, and the lowest

value of operation stand.

To re duce the prob lems such as cappi ng that

might occur during tablet production, these

machines were designed to have pre-load and

main load roll assemblies in the same structure and

to exactly divide their locations to distribute loadson the machine and at the same time pressure on

tablets.

You can easily manipulate the upper and lower

compression rolls by servo motor and the height

adjustment of disk lifting device and the values will

be displayed digitally on the operation panel.

Servo Motorand Compression Roll

Basic safety measure against any possible danger for user andmachine safety.

This safety function is triggered when machine fails to operate;

it pops up a safe message that explains the cause of machine

failure on the operating screen with an alarm sound.

If you click the icons, it will show detailed information on the

cause of the problem and how to solve, etc.

Safety Message Function

Exclude Model

GRC-S Series

MRC-D Series

A adopted "auto-sampling function to the first layer of thedouble-layer tablets during production process" for the double-

layer production models, MRC-D and HRC-S series, in all our

rotary tablet press lines.

Unlike the previous method that requires halting the machine

for sampling, it is designed to automatically carry out "sampling

of the first layer of the double tablets" during the production

process by a simple operation from the operation panel during

full operation of machine, thereby ensuring a decrease in defect

rates and accurate double-layer tablet production.

With the aid of this function, after the initial setting for double-

layer tablets, users can carry out automatic sampling when they

need to measure the weight, thickness, and hardness of the first

layer of the tablets anytime during production

Implement auto-sampling functionto the first layer of the double-layertablet

Rotary Tablet PressI 09

- E.M.G S/W Pushing

- Scraper Alarm

- Upper Punch Tightness

- Upper Punch Safety Rail

- Main Motor Overload

- Target Quantity Stop

- Oil Lubrication Alarm

- Insert Handle

- Dust Collector Trip

- Ejection Force Alarm

- Door Opened

- Powder Shortage

- Lower Punch Tightness

- Lower Punch Safety Rail

- Feeder Overload

- Low Air Pressure

- Linear Alarm

- AWC Stop

- Interruption

- Hydraulic Alarm


6/14

Sejong Pharmatech

Rotary Tablet PressI 11

GRC-S series of Sejong Pharmatech is designed and produced to be suitable for pharmaceutical company's

labs, university research institutes, or small-scale production lines, while being characterizedby simple but all-inclusive functions for tablet production.In particular, GRC-S series is a small tablet press that is able to produce a maximum of 132,000 tablets perhour and is aided by AWC system

to produce tablet exactly as required.It implements a powder feeding system with a mechanical feed as a basic option (customers can also selectan open feeder as an option).Also, its large touch screen of 15 inches enables the user to easily operate the machine.

GRC-S SeriesGRC-15S / GRC-18S / GRC-22S

RotaryTablet Press

GRC-S Series

HRC-S SeriesMRC-D Series

MRC-S Series


7/14

Numberof Stations

PitchCircleDiameter()

Max.Output(Hour)

Revolutionof Disk( R.P.M)

Max.Tablet Round()

Diameter Oblong(mm)

Max.TabletThickness(mm)

FillingDepth(mm)

UpperPunchInsert(mm)

Max.PrePressure(kg.f)

Max.MainPressure(kg.f)

DieType

PunchType

Machine ExcludingHopper

Height(mm)IncludingHoppe r

MachineFloorSpace(mm)

Weightof Machine(kg)

Powerof MainMotor

PowerSupplyData

TopView

FrontView

SideView

15 18 22

210

90,000 108,000 132,000

15-100 15-100 15-100

25 16 13

25 19 14

8.5

0.5-6 (Option)

4.5-10

8.5-14

12.5-18

16.5-22 (Option)

1-6

2,000 2,000 2,000

6,000 6,000 6,000

D B BB

EU-D,TSM-D EU-B,TSM-B EU-B,TSM-B

1,736

1,987

800 X 1,300

Approx. 2,500

5hp (3.7kW)

220 / 380 / 400 / 415 / 440 V, 50 / 60 Hz, 3Phase

DescriptionModel

GRC-15S GRC-18S GRC-22S

GRC-S Series

1 Main Machine

2 A.W.C

3 Power Loading System (Option)

4 Metal Detector (Option)

5 Dust Collector (Option)

6 U.T.S (Option)

7 Deduster (Option)

Pre- pressure and Main pressure could be changed depending on the size of the compress and filling depth, powder or granulation.

It is dependent on the physical specification of the used material for the compress.

The above specification is subject to change without prior notice for the technical development.

The disk revolution speed is standard of round type.


Product Specification Dimensions with Layout

Rotary Tablet Press I 1312 I Rotary Tablet Press


8/14

Numberof Stations


Max.Output(Hour)

Revolutionof Disk( R.P.M)

Max.Tablet Round()

DiameterOblong(mm)


FillingDepth(mm)




DieType

PunchType


Height(mm) IncludingHoppe r



Powerof MainMotor

PowerSupplyData

MRC-SSeries

31 37 45 47

420

186,000 222,000 270,000 282,000

15-100 15-100 15-100 15-100

25 16 13 11

25 19 14 12

8.5

0.5-6 (Option)

4.5-10

8.5-14

12.5-18

16.5-22 (Option)

1-6

10,000 10,000 10,000 10,000

10,000 10,000 10,000 10,000

D B BB BBB

EU-D, TSM-D EU-B, TSM-B EU-B, TSM-B EU-B, TSM-B

2,024

2,147

1,100 X 1,550

Approx. 4,000

15hp (11kW)

220 / 380 / 400 / 415 / 440 V, 50 / 60 Hz, 3Phase

DescriptionModel

MRC-31S MRC-37S MRC-45S MRC-47S



The above specification is subject to change without prior notice for the technical d evelopment.



Product Specification


A standard rotary tablet press of Sejong Pharmatech, MRC-S series is based on HMI system to ensure easy useand optimum performance.

This series adopts a disk exchange method to maximize productivity improvement and cost saving effect, andis designed to have 31 holes, 37 holes, 45 holes, 47 holes stations as basic options so that customers canreplace it with any disk wanted.Also, it is designed to manufacture any type of tablet regardless of type of punch and can produce oblong

type tablets from min. 11mm to max. 25mm.A separate dust collector on the disk and ejection chute effectively minimizes powder scattering in themachine during tablet production.

MRC-S SeriesMRC-31S / MRC-37S / MRC-45S / MRC-47S


9/14

1 Main Machine

2 A.W.C




6 Disk Table (Option)

7 U.T.S (Option)

8 Deduster (Option)9 C.A.F (Option)

10 Magnesium Spray System (Option)

TopView

FrontView

SideView

Dimensions with LayoutRotary Tablet Press Sejong Pharmatech


One of the key features of MRC-D series lies in the fact that it can produce double-layer tablets and in case ofthe production of single-layer tablets, it is possible to increase productivity two-fold by applying a double-sided discharge system.

Also, compared with the HRC-S model of Sejong, though it is relatively smaller in appearance, it enables mass-production.In producing double-layer tablets, in particular, it is equipped with a powder retrieval function to minimizecolor mixing between different tablet layers, thereby ensuring more effective double-layer tablet production.It applies 580mm disk PCD to increase output per hour by about 14% while decreasing noise by increasing the

up and down curve section of a punch.

- Apply 580mm disk PCD to increase output per hour by about 14% while decreasing noise by increasing the up and down curvesection of a punch.

- Since the dust collector is designed as all-in-one type from the outlet scraper to discharge chute, it makes dust collecting moreeffective and reduces dust inside the machine.

- As it adopts the all-in-one type Feeder Driving Shaft Housing method, it is easy to disassemble, assemble, and repair and maintain.- Adopted implement auto-sampling function to the first layer of the double-layer tablet

MRC-D SeriesMRC-39D / MRC-49D / MRC-61D


10/14

Numberof Stations


Max.Output SingleLayer

(Hour) DoubleLayer

Revolutionof SingleLayer

Disk(R.P.M) DoubleLayer

Max.Tablet Round()

Diameter Oblong(mm)


FillingDepth(mm)




DieType

PunchType





Powerof MainMotor

PowerSupplyData

MRC-DSeries

39 49 61

580

280,800 411,600 512,400

81,900 117,600 146,400

15-60 15-70 15-70

10-35 10-40 10-40

25 16 13

25 19 14

8.5

0.5-6 (Option)

4.5-10

8.5-14

12.5-18

16.5-22 (Option)

1-6

3,000 3,000 3,000

10,000 10,000 10,000

D B BB

EU-D, TSM-D EU-B, TSM-B EU-B, TSM-B

2,020

2,140

1,400 X 1,820

Approx. 4,500

15hp (11kW)

220 / 380 / 400 / 415 / 440 V, 50 / 60 Hz, 3Phase

DescriptionModel

MRC-39D MRC-49D MRC-61D

1 Main Machine

2 A.W.C





7 U.T.S (Option)



TopView

FrontView

SideView







Product Specification Dimensions with Layout


11/14

Numberof Stations


Max.Output SingleLayer

(Hour) DoubleLayer

Revolutionof SingleLayer

Disk(R.P.M) DoubleLayer

Max.Tablet Round()

Diameter Oblong(mm)


FillingDepth(mm)




DieType

PunchType





Powerof MainMotor

PowerSupplyData

HRC-SSeries

51 65 77 83

720

428,400 624,000 739,200 826,680

122,400 156,000 184,800 199,200

15-70 15-80 15-80 15-80

15-40 15-40 15-40 15-40

25 16 13 11

25 19 14 12

8.5

0.5-6 (Option)

4.5-10

8.5-14

12.5-18

16.5-22 (Option)

1-6

10,000 8,000 8,000 8,000

10,000 8,000 8,000 8,000

D B BB BBB

EU-D, TSM-D EU-B, TSM-B EU-B, TSM-B EU-B, TSM-B

2,008

2,144

1,680 X 2,010

Approx. 5,000

15hp (11kW)

220 / 380 / 400 / 415 / 440 V, 50 / 60 Hz, 3Phase

DescriptionModel

HRC-51S HRC-65S HRC-77S HRC-83S





Product Specification



New HRC-S series rotary tablet press is a representative tablet press line of Sejong Pharmatech. Using HMI system,it collects data perfectly and provides production data on a real-time basis, while storing and managing data to

ensure more stable productivity. This series is able to produce double-side or two-layer tablets and is ideal formass production-oriented production lines.The advanced structure of the equipment is more solid to withstand pre- and main compression forces and its diskchange system that uses a disk lifting device ensures maximum productivity at lower costs. With an automatic

lubricator as a basic option, HRC-S series allows a significant drop in maintenance costs due to reduced wear onpunch and rails and adopts specifically designed cast-frame structure to minimize vibrations and noise duringtablet production. Sejong Pharmatech's HRC-S series is the best solution for customer's productivityimprovement and cost reduction during mass production.

- With the use of a large 15-inch touch screen, easy to access and operate via user interface.- Adopted AWC system (Automatic Weight Control) allows production of tables with more accurate quantity.- Using HMI system, it collects data perfectly and provides production data on a real-time basis,

while storing and managing data to ensure more stable productivity.- As it adopts a disk change system that uses disk lifting device, it maximizes productivity at lower costs.- Able to double-side discharge and produce two-layer tablets.- Adopted implement auto-sampling function to the first layer of the double-layer tablet.- Designed to support easy disassembly and assembly so as to ensure convenient repair and maintenance.- Specifically designed special cast-frame structure to minimize vibrations and noises during tablet production.

HRC-S SeriesHRC-51S / HRC-65S / HRC-77S / HRC-83S


12/14

1 (0.75) 2 (1.5) 3 (2.2) 5 (3.7) 7.5 (5.5)

2.1 4.4 5.2 6.5 6.6

1.9 3.5 4.1 5.5 5.6

1,700 2,050 2,200 2,800 3,200

1,300 1,480 1,632 2,000 2,500

100 100 100 300 300

450 450 600 400 450

6 6 6 9 9

0.84 0.95 1.1 2.3 2.6

20 20 20 40 55

420 560 560 700 700

1,050 1,050 1,050 1,300 1,400

1,100 1,200 1,300 1,300 1,400

80 83 98 160 172

MotorRating (hp)(kW)

MaxAirFlow 60Hz

(CMM) 50Hz

MaxVacuum 60Hz

(mmAq10%) 50Hz

/

Filter Size Length

ea

FilteringArea ()

DustBox Capacity(Lr)

W

Dimension ( mm) D

H

Weight(kg)

Name

Functionand capacity

Electricityspec.

Electricpower

Weight

Pressureair

Vacuum

Size

Up-hillhighspeedde-duster

Capacity:300,000~ 1,200,000/ Hour

Highspeedde-dusterandautomaticde-dust

220V/60Hz,200V/50Hz

300Watts

about160kg

1~3Pa

1800 Liter/min

Heigh t : 9 60 ~1 08 0 / V olum e: 5 00 ~ 7 00

1 Main Machine

2 A.W.C





7 U.T.S (Option)



Deduster

Description Deduster

A device that shakes up dust on the surface of the discharged tablets

from the machine based on vibration principles.

By connecting it to a dust collector, it can absorb dust from tablets

and give them an air shower to make them cleaner.

Dust Collector

Description OVC-5B OVC-15B OVC-22B OVC-37B OVC-55B

Model

Connected to the main body, it enables work in a pleasant environment

by powerfully inhaling dust inside the machine.

Also by connecting it to the deduster, it inhales dust coming from the tablets.

TopView

FrontView

SideView

Dimensions with Layout Option Items




13/14

Auto Powder Loading System

This equipment is designed on a sensor-operated vacuum and automatically deliverspowder to a hopper inside the machine. As it uses a low-pressure vacuum ejector, it

keeps excellent performance in low air pressure of 3 to 4 kilos.

You can choose between automatic mode by sensor and manual mode.It is easy to mount and dismount and to clean and manage.

When it is necessary to provide a feeder with a certain amount of powder due to

low liquidity or bad ingredients, this constant amount feeder is highly effective.It can provide a constant amount of powder to the feeder through the rotary

motion of the sensor-operated motor and is effective in accurate tablet production

if there is a weight variation or bad liquidity through constant powder provision.

Constant Amount Feeder

Description SPL-100 SPL-200

OperatingVoltage

Controlsource

Dimension(mm)

Weight(kg)

Compressedair

220V,50/60Hz

220V

W40 0 X D 62 0 X H2, 40 0 W45 0 X D8 20 X H2 ,6 20

150 200

6kg/

Model Dimension (mm)

HRC-S

MRC-S

MRC-D

GRC-S

W490XD270XH449

W490XD270XH449

W530XD270XH449

W498XD270XH452

Option Items



While the existing AWC is a weight-adjusting system by pressure, the universal tablet testing system is a comprehensive tablet measuring

device that measures actual tablet weight to give feedback to the machine.

It is a statistical analysis system that measures a tablet's weight, height, diameter and hardness by regularly carrying out a sampling oftablets discharged from the machine.

An automatic weight control system is a computer-operated function

in which a central processing unit automatically controls tablet production

to carry out statistical analyse, to prepare production process documents andto adjust the weight of tablets.

As the program system is connected to the main computer, it obviates the

needs for human involvement in producing tablets; controls the process byassigning various functions to the machine based on compression pressure;

indirectly monitors the machine to maintain consistent tablet compression

according to preset weight and thickness; and print out a perfect productionspecification by statistically evaluating all collected data.

Automatic Weight Control System

Universal Tablet Testing System


HRC-S,MRC-D,MRC-S,GRC-S H: 2,396


HRC-S,MRC-S,MRC-D,GRC-S W650X D600XH1,500


14/14

Optional

Item

Filling

Depth

(mm)

GraphicPanel

Compression

Roller

Adjustment

15

-

-

--

-

-

-

Manual

Manual

Manual

Motorized

-

-

-

-

-

-

-

1,736

1,987

800 X1,300

EU-35

EU-D

IPT-D

EU-B

IPT-BEU-35

DType

BType

BBType

BBBType

Manual 4.518mm

ACAM (0.56mm)

BCAM (4.510mm)

A.W.C C CAM (8.514mm)

DCAM (12.518mm)

ECAM (16.522mm)

UpperPreCompression

LowerPreCompression

UpperMainCompression

LowerMainCompression

SingleSideDualSide

A.W.CwithHMI (Pro-facePanelPC)

Manual(Pro-faceTouchScreen)

A.W.CwithHMI

Manual

DiskChangeDevice

AdditionalDisk(withupperandlowerrail)

DiskTable(onlyturretchangedevice)

SingleType

DoubleType

TabletDedusterBottomUpType

TopDownType

NormalType

SUS304

Dus tC ol lec tor 1. 5k W

2.2kW

3.7kW

MetalDetector

C.A.F(ConstantAmountFeeder)

U.T.S(UniversalTabletTestingSystem)

CalibrationKit forLoad-cell

MagnesiumSpraySystem

DrumChangerDevice

OpenFeeder

SparePartsfor2 years

ExcludingHopper

IncludingHopper

18

-

-

-

-

-

-

-

-

Manual

Manual

Manual

Motorized

-

-

-

-

-

-

-

1,736

1,987

800X1,300

22

-

-

-

-

-

-

-

-

Manual

Manual

Manual

Motorized

-

-

-

-

-

-

-

1,736

1,987

800X1,300

39

-

-

--

-

-

-

-

Motorized

Manual

Motorized

Motorized

(*)

-

-

2,024

2,147

1,400X1,820

49

-

-

-

-

-

-

-

-

-

Motorized

Manual

Motorized

Motorized

(*)

-

-

2,024

2,147

1,400X1,820

61

-

-

-

-

-

-

-

-

-

Motorized

Manual

Motorized

Motorized

(*)

-

-

2,024

2,147

1,400X1,820

31

-

-

--

-

-

-

-

Motorized

Motorized

Motorized

Motorized

-

-

-

-

-

-

2,010

2,140

1,100X1,550

37

-

-

-

-

-

-

-

-

-

Motorized

Motorized

Motorized

Motorized

-

-

-

-

-

-

2,010

2,140

1,100X1,550

45

-

-

-

-

-

-

-

-

-

Motorized

Motorized

Motorized

Motorized

-

-

-

-

-

-

2,010

2,140

1,100X1,550

47

-

-

-

-

-

-

-

-

-

Motorized

Motorized

Motorized

Motorized

-

-

-

-

-

-

2,010

2,140

1,100X1,550

51

-

-

--

-

-

-

-

Motorized

Motorized

Motorized

Motorized

(*)

-

-

-

-

2,008

2,144

1,680X2,010

65

-

-

-

-

-

-

-

-

-

Motorized

Motorized

Motorized

Motorized

(*)

-

-

-

-

2,008

2,144

1,680X2,010

77

-

-

-

-

-

-

-

-

-

Motorized

Motorized

Motorized

Motorized

(*)

-

-

-

-

2,008

2,144

1,680X2,010

83

-

-

-

-

-

-

-

-

-

Motorized

Motorized

Motorized

Motorized

(*)

-

-

-

-

2,008

2,144

1,680X2,010

Model GRC-15S GRC-18S GRC-22S MRC-39D MRC-49D MRC-61D MRC-31S MRC-37S MRC-45S MRC-47S HRC-51S HRC-65S HRC-77S HRC-83S

GRC-SSeries MRC-DSeries MRC-S Series HRC-S Series

Approx2,500

220/380/400/ 415/440V,50/60Hz, 3Phase

Approx4,500

220/380/400/ 415/440V,50/60 Hz,3Phase

Approx6,500

220/380/440/ 415/440V,50/60 Hz,3Phase

Approx4,000

220/380/400/ 415/440V,50/60 Hz,3Phase

AutoPowderLoading

Standard Option Applicable Soon(*) Double layer apply - Not Applicable

Pre- pressure and Main pressure could be changed depending on the size of the compress and filling depth, powder or granulation.It is dependent on the physical specification of the used material for the compress.


Machine Details



NumberofStations

PunchSize

DieSize

EjectionForce

LubricationSystemwithOil DistributePump

UpperTightSensingDevice

LowerTightSensingDevice

DischargeChute

ProgrammableLogicController(OMLON)

MachineHeight(mm)


WeightofMachine(kg)

PowerSupplyData

Date post:	25-Feb-2018
Category:	Documents
Upload:	meacno
View:	226 times
Download:	0 times

Tablet Press

Documents