Tactical Equipment 2016 - SAR Products · SAR Products Ltd was founded in 2003 by Dave & Dorene...

Specialist Access & RescueProducts Ltd.

2016

Tactical Equipment

Tactical Catalogue 2016/17

Pages4-13

Pages30-35

Pages24-29

Pages36-37

Pages38-39

Pages44-47

Pages48-53

Pages54-57

Pages58-61

Pages20-21

Pages22-23

Pages14-17

Pages18-19

Pages40-43

Harnesess

Work Positioning Lanyards

Karabiners

Ascenders & Descenders

Pulleys & Pulley Systems

Stretchers

Rope

Quadpods & Winch

Accessories

Back-Up Devices

Rope Lanyards

Shock Absorbing Lanyards

Bags

Slings

CONTENTS

Don’tCompromise!

SAR Products

SAR Products Ltd was founded in 2003 by Dave & Dorene Allport after Bacou-Dalloz formally Troll Safety Equipment, closed the Troll factory in Saddleworth and moved production overseas.

Dave worked for over 22 years as a Technical Specialist for rescue & rope access and designed equipment and techniques used in these areas. He also started the Troll Training School and trained Fire & Rescue Services, Police, and Special Forces in the UK and around the world in rescue & rope techniques.

We pride ourselves on manufacturing products that offer superior performance, reliability, user benefits and at the same time are cost effective.

Our market knowledge and experience is what sets us apart. Our customer-focused attitude ensures that we continue to offer products that are backed up with exemplary customer service.

Our policy is to manufacture high quality products to meet the increased demand for safety in both the national and international markets. We are committed to customer service and quality management, having been certified with the BS EN ISO 9001:2008 standard.

Our highly skilled manufacturing department is where our innovative products are transformed from raw material to finished goods, within the 15,000 sq ft facility in Greater Manchester, England.

We believe it is vital that every piece of safety equipment that we make has been thoroughly tested and inspected by highly competent people, reassuring the user that each and every component meets the highest standards. These standards for quality are in place during all stages of production, from yarn input to shipping of the product.

All SAR’s products are manufactured from certified quality raw materials. The finished products are subject to sample destruction testing or proof loading tests in accordance with current manufacturing standards.

All of SAR’s products are manufactured to the appropriate European standards required for it’s equipment type.

SAR Products Ltd now produces equipment that is shipped worldwide to over 20 different countries.

Don’t compromise!

2 3

Tactical Catalogue 2016/17HARNESSES

Available colours

HA

RNESSES

MERLINFULL BODY HARNESS

Specifications: Merlin Full Body Harness• Front fixed Karabiner• Triple front attachments Merlin 4 & 6 styles only• Two side attachments. Fold back when not required. Merlin 5 & 6 only• One rear dorsal attachment. Fold away when not required• Belay loop 30kN and Dee connections 25kN• Fully adjustable waist and legs• Step in fitting or wrap around fitting• Twin adjustment on the waist• Quick clip buckles on leg loops fitted on the QC styles• Laminated sandwiched closed cell foam padding• Shaped waist and legs for extra comfort• Polyester webbing• Three reinforced catch free gear rack loops• Four equipment rings• Slotted waist for fitting pouches, bolt bags or tool frogs• Waist circumference: Min 74cm - Max 114cm• Conforms to EN813-2008 EN358-1999 EN361-2002

Available colours

MERLIN TECHFULL BODY HARNESS

Specifications: Merlin Tech Body Harness• Front fixed Croll.• Triple front attachments Merlin 4 & 6 Styles only• Two side attachments. Fold back when not required. Merlin 5 & 6 only• One rear dorsal attachment. Fold away when not required• Belay loop 30kN and Dee connections 25kN• Fully adjustable waist and legs• Step in fitting or wrap around fitting• Twin adjustment on the waist• Quick clip buckles on leg loops fitted on the QC styles• Laminated sandwiched closed cell foam padding• Shaped waist and legs for extra comfort• Polyester webbing• Three reinforced catch free gear rack loops• Four equipment rings• Slotted waist for fitting pouches, bolt bags or tool frogs• Waist circumference: Min 74cm - Max 114cm• Conforms to EN813-2008 EN358-1999 EN361-2002

Merlin 6 Tech REF: H0075T Merlin 6 Tech QC REF: H0075TQCMerlin 5 Tech REF: H0074T Merlin 5 Tech QC REF: H0074TQCMerlin 4 Tech REF: H0073T Merlin 4 Tech QC REF: H0073TQCMerlin 3 Tech REF: H0072T Merlin 3 Tech QC REF: H0072TQC

Merlin 6 REF: H0075 Merlin 6 QC REF: H0075QCMerlin 5 REF: H0074 Merlin 5 QC REF: H0074QCMerlin 4 REF: H0073 Merlin 4 QC REF: H0073QCMerlin 3 REF: H0072 Merlin 3 QC REF: H0072QC

The Merlin full body harness has been designed for industrial rope access and technical rescue, where personnel wish to have either a wrap around or step in fit, with a pull over the head style. The wrap around fit has been constructed into all the SAR multi purpose harness range. This innovative pattern includes two independent front waist attachment points in different profiles. This is so the rope access and rescue technicians can utilise any type of rope descender without twisting the system.

The Merlin is also fitted with upper ‘D’ connection points at the front and rear for safety back-up and fall arrest attachment. The laminated foam and shaped shoulder pads give additional comfort to the user.

The Merlin harness comes in two different forms, the standard and Merlin Tech which has the addition of a fixed chest ascender. This gives an advantage to those who employ ‘frogging’ techniques for ascending.

4 5


KESTREL 2FALL ARREST HARNESS

KESTREL 4FALL ARREST HARNESS

Specifications: Kestrel 2 & 4 Fall Arrest Harnesses

The Kestrel fall arrest harness has been upgraded and now comes in two styles with two colour choices. The harness has a front and rear attachment point for fall arrest connection. We recommend the front be used for fall arrest. The side ‘D’s on the Kestrel 4 can be folded back when not in use, therefore reducing risk of inadvertent snarling.

Quick clip buckles can be fitted on the leg straps and fixed padding can also be fitted to any of the Kestrel range when ordered. The padding is made of sandwich laminated foam to give added comfort when donning, this also makes the harness easier to fit as thepadding takes any twists from the webbing.

Fitting is normally wrap around but can be left fastened at the chest/sternum connection to give a quicker fitment. Shoulder adjustment buckles use two square link buckles and once adjusted to fit the user will not slip during everyday use.

The leg connection is the standard square link and twin slot buckling system with a heavy duty elastic tidy for any excess webbing to be captivated and the alternative QC fitting also has an elastic tidy.

Kestrel 2 REF: H0040Kestrel 2 QC REF: H0042STDQC

Kestrel 4 REF: H0043Kestrel 4 QC REF: H0043STDQC

Kestrel 2:• Kestrel 2 & 2QC Conforms to: EN361-2002 Full body harness for Fall Arrest• Kestrel 2 & 2QC Connections: One Sternal, One Dorsal• Weight: 860g• Size: Std fits: Sm, Med and Lrg. Ex Large & Ex Small made to order.

Kestrel 4: • Kestrel 4 & 4QC Conform to: EN361-2002 and EN358-1999 Work Positioning.• Kestrel 4 & 4QC Connections: One Sternal, One Dorsal and Two side.• Weight: 860g• Size: Std fits: Sm, Med and Lrg. Ex Large & Ex Small made to order.

RAPTOR 4FULL BODY HARNESS

RAPTOR 6FULL BODY HARNESS

Specifications: Raptor 4 & 6 Full Body Harnesses

The Raptor 4 & 6 full body harness has been specifically designed for rope access and technical rescue personnel who prefer a multi purpose full body without a restrictive chest strap. This approach comes from years of experience being suspended in harnesses and a different approach and attitude in the evolution of harness design. Modifications to the initial concept have been made over the years thanks to the constructive input from our world wide users.

• Belay loop 30kN and Dee’s 25kN• Triple front attachments• One rear attachment• Two side attachments (Raptor 6 only)• Colours: Orange & Black, Blue & Black and All Black • Fully adjustable waist and legs• Wrap around or step in fitting• Well-established and easy interlocking buckle system• Twin adjustment on the waist• Laminated sandwiched closed cell foam padding • Shaped waist and legs for extra comfort• High quality polyester webbing• Four reinforced catch free gear rack loops• Waist circumference: Min 74cm - Max 114cm• Leg/Thigh circumference: Min 42cm - Max 70cm• Weight: Raptor 4 - 1.50kg.• Weight: Raptor 6 - 1.75kg.• Conforms to EN361-2002, EN358-1999 and EN813-2008

Raptor 4 REF: H0030 Raptor 6 REF: H0031

Side Shot Raptor 4 TechnicalAccess Riggers Full Body Harness

Side Shot Raptor 6 TechnicalAccess Riggers Full Body Harness

The Raptor, like the Merlin has the innovative pattern that includes two independent front waist attachments points in different profiles, this is so rope access and rescue technicians can utilise any type of rope descender without twisting the system.

The Raptor 6 has two side ‘D’ connections that fold back flat when not required for use. The harness also has sandwich closed cell foam formed and shaped pads for waist and legs giving superb comfort.

Available colours Available colours

HA

RNESSES

6 7


KITECHEST HARNESS

KITEQC CHEST HARNESS

Specifications: Kite Chest Harnesses

The Kite chest harness in combination with a threaded link sling have been designed to be used with any of the SAR sit harness range for added comfort and protection. The Kite can be utilised for climbing, mountaineering, rescue, intervention and technical access.

The harness has front loops for use with a link sling to keep the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361.

The Kite can be used for connecting a chest ascender by using the 25mm front strap threaded through the top hole of the ascender and the bottom of the ascender connected to the sit. The chest ascender can be fitted over the link sling and a karabiner in the chest loops giving the ability to be used in an instant.

The Kite Chest Harness must not be used on its own.

Kite Chest & Link Sling REF: H0010NSN: 4240-99-229-5357

Kite QC Chest & Link Sling REF: H0010QC

• Fully adjustable chest• Wrap around cross fitting• Interlocking shoulder buckle system• High quality polyester webbing• Weight: Chest 390g - Link Sling 40g• The Kite chest conforms to EN361 only when used with a SAR sit harness and the

Link sling• Link sling conforms to EN365, EN566 & EN795

Specifications: Kite QC Chest Harnesses• Fully adjustable chest• Wrap around cross fitting• Quick Clip buckle front harness connection• Interlocking shoulder buckle system• High quality polyester webbing• Weight: 430g• The Kite QC conforms to EN361 only when used with a SAR sit harness and a Link

sling• Link sling conforms to EN365, EN566 & EN795

The Kite QC chest harness is fitted with a quick clip buckle for easy donning and removal. The Kite QC can be utilised for climbing, mountaineering, rescue, intervention and technical access.

The link sling can be fitted and kept in position and is easily removable to swap it out, The link sling keeps the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361.

The Kite QC chest harness must not be used on its own.


HA

RNESSES

OSPREYCHEST HARNESS

OSPREY QCCHEST HARNESS

Osprey & Link Sling REF: H0016Osprey Black & Link Sling REF: H0016MOD

NSN: 4240-99-273-0406

The Osprey chest harness is an improvement in design and materials of classic chest harness models produced in the past. The chest harness has fitted adjustable shoulder & chest straps for improved fit and comfort for the user.

The harness has front loops for use with a link sling to keep the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361.

The Osprey can be used for connecting a chest ascender by using the 25mm front strap threaded through the top hole of the ascender and the bottom of the ascender connected to the sit. The chest ascender can be fitted over the link sling and a karabiner in the chest loops giving the ability to be used in an instant. The harnesses and link sling have been designed to be used for climbing, mountaineering, rescue, intervention and technical access.

The Osprey QC chest harness is an improvement in design and materials of classic chest harness models produced in the past. The harness is fitted with adjustable shoulder & chest straps for improved fit and comfort for the user. It is also fitted with a front attachment quick clip buckle for easy donning and removal.

The link sling can be fitted and kept in position and is easily removable to swap it out, The link sling keeps the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361.

Osprey QC & Link Sling REF: H0016QC

Specifications: Osprey Chest Harnesses• Wrap around adjustable chest strap and adjustable shoulder straps with interlocking

fixed buckle systems• Quick clip buckle front harness connection• High quality polyester webbing• Weight: 444 g, Link sling 50g• The Osprey conforms to EN361 only when used with a SAR sit harness and a Link sling• Link sling conforms to EN365, EN566 & EN795

Specifications: Osprey QC Chest Harnesses• Wrap around adjustable chest strap and adjustable shoulder straps with interlocking

fixed buckle systems• Quick clip buckle front harness connection• High quality polyester webbing• Weight: 444g, Link Sling 50g• The Osprey QC conforms to EN361 only when used with a SAR sit harness and a Link

sling• Link sling conforms to EN365, EN566 & EN795.


8 9


Specifications: Harrier 2 & 4 Sit Harnesses• Twin independent front attachment points• Belay loop 30kN and Dee 25kN• Two side attachments, Harrier 4 & 4QC Only• Fully adjustable waist and legs• Wrap around or step in fitting• Well-established and easy interlocking buckle system on waist• Twin adjustment on the waist to keep waist pad central• Laminated formed closed cell foam padding• Shaped waist and legs for extra comfort• High quality polyester webbing• Four reinforced gear rack loops• Waist circumference: Min 74cm - Max 114cm.• Leg/Thigh circumference: Min 42cm - Max 70cm.• Harrier 2 conforms to EN813 • Harrier 4 conforms to EN813 & EN358 • Both harness conform to EN361 when linked with any of the SAR chest harnesses

and a Link Sling.• Weight: Harrier 2 - 1.1Kg• Weight: Harrier 4 - 1.3Kg

Upgrade coming soon: • Working load limit: 150kg

Harrier 4 REF: H0002Harrier 4QC REF: H0002QC

Harrier 2 REF: H0001Harrier 2QC REF: H0001QC

The Harrier sit harness has been designed for rope access and technical rescue service personnel who prefer a separate sit and chest harness format to that of a multi purpose full body harness. The Harrier, like the Merlin and Raptor has the innovative pattern that includes two independent front waist attachments points in different profiles so that rope access and rescue technicians can utilise any type of rope descender without twisting the system.

The Harrier has a wrap around fitting system for ease of donning and safety which stops the harness getting soiled, as is common with the step in type harnesses. The QC style has quick clip buckles on the leg loops.

HARRIERLITE SIT HARNESS

HAWKSIT HARNESS

Harrier 2 Lite REF: H0001L Harrier 2 Lite REF: H0001M

Hawk Black REF: H0004Hawk Cam REF: H0003CAM

NSN: 4240-99-361-7438

Specifications: Harrier 2 Lite Sit Harnesses Specifications: Hawk Sit Harnesses• Front attachment• Double thickness 18mm belay loop 30kN• Fully adjustable waist and legs• Wrap around or step in fitting• Well-established and easy interlocking buckle system• Laminated formed, closed cell foam padding• Shaped waist and legs for extra comfort• High quality polyester webbing• Four reinforced gear rack loops• Waist circumference: Min 74cm - Max 120cm• Leg/Thigh circumference: Min 42cm - Max 70cm.• Weight: 900g

• Conforms to EN813 Sit Harness, EN361 Full Body Harness when linked with any of the SAR chest harness range and Link Sling.

Upgrade coming soon: • Working load limit: 150kg

• Front attachment• Double thickness 18mm belay loop 30kN• Fully adjustable waist and legs• Wrap around or step in fitting• Well-established and easy interlocking buckle system• Laminated formed, closed cell foam padding• Shaped waist and legs for extra comfort• High quality polyester webbing• Four reinforced gear rack loops• Waist circumference: Min 74cm - Max 120cm• Leg/Thigh circumference: Min 42cm - Max 70cm.• Weight: 814g

• Conforms to EN813 Sit Harness, EN361 Full Body Harness when linked with any of the SAR chest harness range and Link Sling.

Upgrade coming soon: • Working load limit: 150kg • Will conform to: EN12277-C

HARRIER 2SIT HARNESS

HARRIER 4SIT HARNESS

The Hawk sit harness has been created for military and mountain rescue personnel and those who require the security and durability of a very robust harness as an alternative to that of a rock climbing harness. Quality materials, design, construction and simplicity in fitting make this the supreme personal issue sit harness.

The emphasis in design was placed upon strength, stability, light weight and comfort. The Hawk delivers in all these fields and is perfect for anyone who needs to ‘hang around’. The wrap around fitting is also ideal when wearing crampons etc, but if preferred you may keep the buckles fastened to give step in fitment.

Harrier 4 Industrial & Work Positioning Sit Harnesswith Osprey QC & Link Sling

Available colours Available coloursAvailable colours

HA

RNESSES

The Harrier Lite sit harness has been designed for rope access and technical rescue service personnel who prefer a separate sit and chest harness format. This lite sit harness differs from our standard Harrier by being fitted with the padding shape from our Hawk sit harness, lowing the weight and increasing moblity for the user. It still includes two independent front waist attachments points in different profiles so that rope access and rescue technicians can utilise any type of rope descender without twisting the system.

The Harrier has a wrap around fitting system for ease of donning and safety which stops the harness getting soiled, as is common with the step in type harnesses. The QC style has quick clip buckles on the leg loops.

10 11


DOGHARNESS

Our Dog Harness is now a well tested and proven design with updated materials which is very popular with search and rescue dog handlers. The harness comes in two sections for ease of fitting and flexibility of use for the dog with both sections being fully adjustable. The front/body harness has a padded chest for comfort and agility, with separate detachable leg loops for additional security.

The harness can be winched from the main lifting/lowering point with or without the leg loops dependent upon size, shape and weight of dog.

Dog Harness inc Chest Pad REF: H0015P

Specifications: Dog Harness• Chest pad (removable) - 6mm laminated closed cell foam. • High grade 25mm and 45mm polyester webbing.• Elastic retaining loops for stick light or torch.• Fully adjustable for Sm, Med & Lrg size dogs.• Weight: Chest section 300g

HA

RNESSES

PADDED RIGGERSBELT WITH TRI DEE

RIGGERS BELTWITH WEBBING EYE

RIGGERS BELTWITH TRI DEE

Padded Riggers Belt - Black REF: RS019BPADPadded Riggers Belt - Cam REF: RS019CPAD

Belt with Webbing Eye - Black REF: RS019CWBelt with Webbing Eye - Cam REF: RS019BW

Belt with Tri Dee - Black REF: RS019BTDBelt with Tri Dee - CAM REF: RS019CTD

Specifications: Padded Riggers Belt Specifications: Riggers Belt• Size: 31” to 54” • Weight: 350g• Rated to 18kN.

• Small: 26” to 32” • Medium: 30” to 36” • Large: 38” to 44” • Weight Tri Dee: 260g• Weight Webbing Eye: 230g• Rated to 18kN.

Our Riggers Belts are manufactured using a double thickness high grade polyester webbing for extra strength. The belt has been designed for multi functional uses and is available with either a webbing eye or an alloy Tri Dee, both types are ideal for multifunctional uses.

The Riggers Belts use the adjustable quick release buckle which is rated to 18kN.

Our Riggers Belts are manufactured using a double thickness high grade polyester webbing for extra strength. The belt has been designed for multi functional uses and is available with either a webbing eye or an alloy Tri Dee, both types are ideal for multifunctional uses.


This Riggers Belt is padded for added comfort for the user, it is avaliable with either a 2 bar 3 bar buckle or a quick clip buckle.

The belt is manufactured with double thickness high grade polyester webbing for extra strength. The belt has been designed for multi functional uses and is fitted with an alloy Tri Dee, ideal for multifunctional uses.


Available coloursAvailable colours Available colours

12 13


Specifications: Twin Eye Sling Specifications: Rocker Sling Assembly

10cm REF: S0001 20cm REF: S000330cm REF: S0005 60cm REF:S0007

Our Twin Eye Slings are made with a 18mm polyester superweb, and are rated to 24kN when new. This conforms to the highest standards set by EN354 of 22kN.

Example sizes: 10cm & 20cm Twin Eyed Slings. These can be used with the Rocker or as a short extension for many things such as a cow’s tails used in rope access. 30cm & 60cm Twin Eyed Slings. They can be used as a safety back-up link for yourself or a casualty in rescue, main ascender link sling in ascending and many other uses for the experienced technician.

SLINGS

TWIN EYESLINGS

• Rated load 24kN• Made from high grade polyester webbing• Individual serial number• Conforms to EN354, EN566, EN795-B• Length size variations available on request.• Twin eyes available to be made with 25mm webbing, increasing the rated load to

35kN

Our Twin Eye Slings have a test strength of 24kN when new. This conforms to the highest standards set by EN354 of 22kN. The Gator karabiners are made from high grade alloy, formed from round bar then pressed to shape to give extra strength.

They have a key lock on the nose and gate to stop web catching.

ROCKER SLING ASSEMBLYRocker Assembly Sling REF: S0014

• Working length including karabiners 25cm• Rated load 24kN• High grade polyester webbing• Individual serial number• Conforms to EN354 EN566 EN795-B• Karabiner EN362• Weight: 128g


SLING

S

14 15


Specifications: Circular Rope Sling Specifications: Link Sling

Available colours

Specifications: 18mm Circular Slings Specifications: 25mm Circular Slings

LINKSLING

• Rated load 24kN• High grade polyester webbing• Individual serial number• Colour coded between sizes• Standard length: 20cm• Weight: 40g• Conforms to: EN354, EN566 and EN79• Size variations available on request.

15cm REF: H0021 20cm REF: H0020 35cm REF: H0022

NSN: 4240-99-213-8765

Our Link Sling is made from high grade polyester with a weave that keeps the locking stitch away from the edge to help reduce wear/abrasion. It is made in two different lengths which are colour coded, 15cm for children and 20cm for adults. Longer slings can be made if required, along with all black versions.

It is the main link between any of our chest and sit harnesses to form a full body harness, compliant with EN361 (Personal protective equipment against falls from height - full body harnesses).

These Circular Slings are made using a 25mm polyester superweb and have a tensile strength of 35kN which is far above the required standard.

Standard sizes for the 25mm sling include 120cm & 240cm, but can be made to any required length.

The most popular size for the circular sling is 240cm, this is because it has many uses for the experienced rope access or rescue technician in a variety of environments such as; anchors/belay’s, self equalizing belay, foot loops for traversing, high steppers, and chest harness.

Please Note: Working length is half the advertised sling length.

18mm CIRCULARSLINGS

25mm CIRCULARSLINGS

120cm REF: S0011240cm REF: S0012480cm REF: S0013

• Rated load 24kN• High grade polyester webbing• Individual serial number• Conforms to EN354, EN566 & EN795-B• Size variations available on request.

20cm REF: S0053 30cm REF: S0016 60cm REF: S0025 150cm REF: S0033 240cm REF: S0035 490cm REF: S0036

These circular slings are made using a 18mm polyester superweb and have a tensile strength of 24kN which is far above the required standard.

Standard sizes for the 18mm sling include 20cm, 30cm, 60cm, 150cm, 240cm, & 490cm. However the slings can be made to any required length requested by the client.

This type of sling is possibly the most used sling around the world. It has many uses for the experienced rope technician such as: anchors/belay’s, self equalizing belay, foot loops for traversing, high steppers.

Please Note: working length is half the advertised sling length.

CIRCULARROPE SLING

• Colour: White with red fleck, Black on request• Material: Nylon• Sizes: As above, variations on request• Weight: 80g per Lm• Sling strength: 22kN• Conforms to: EN566 & EN795-B.

120cm REF: S0055 240cm REF: S0056

Our Circular Rope Sling is made from our 11mm tactical rescue rope and can be used for many different applications. The high-twist 32-strand mantle braid provides for high dirt resistance, better grip and high abrasion protection.

The sling is made from nylon and has a tensile strength of 22kN.


• Rated load 35kN• High grade polyester webbing• Individual serial number• Conforms to EN354, EN566 & EN795-B• Size variations available on request.

SLING

S

16 17


Specifications: Single Clip Loop Lanyard• Material: 25mm polyester superweb.• Clip loop eyes: 2• Colours: Variations on request.• Length from absorber eye to fly end eye = 1.3m.• Length when fitted with karabiner/connector 1.6m• Maximum working load 130kg• Weight: 446g• Conforms to EN355 2002 shock absorbing lanyard.• Note: Other lengths can be made, up to a max. total length of 2m or the lanyard can

be supplied without any connectors fitted.

Specifications: Twin Clip Loop Lanyard• Material: 25mm polyester superweb.• Clip loop eyes: 2 per leg• Colours: Variations on request.• Length from absorber eye to fly end eye = 1.3m.• Length when fitted with connectors 1.6m• Maximum working load 130kg• Weight: 472g• Conforms to EN355 2002 shock absorbing lanyard.• Note: Other lengths can be made, up to a max total length of 2m or the lanyard can

be supplied without any connectors fitted.

TWIN CLIPLOOP LANYARD

The Twin Clip Loop Lanyard is made using 25mm polyester superweb with a total length of 1.3m. It has a protected connection eye on each leg of the lanyard. This is so the user can wrap the lanyard around larger anchors and still load the connector/karabiner in the correct profile. This also shortens the lanyard therefore reducing any potential fall distance.

The lanyard can be supplied with or without scaffold hooks & karabiner.

The Single Clip Loop Lanyard is made using 25mm polyester superweb with a total length of 1.3m. It has a protected connection eye on the leg of the lanyard. This is so the user can wrap the lanyard around larger anchors and still load the connector/karabiner in the correct profile. This also shortens the lanyard therefore reducing any potential fall distance.

The lanyard can be supplied with or without scaffold hooks & karabiner.

SINGLE CLIPLOOP LANYARD

REF: L0010S (without Scaff Hooks)REF: L0010SC (with Scaff Hooks)

REF: L0010T (without scaff hooks)REF: L0010TC (with scaff hooks)

SHO

CK A

BSORBIN

G LA

NYA

RDS

SINGLE SHOCKABSORBING ROPE

LANYARDTwin 1.6m with connectors REF: L0021

Twin 1.3m without connectors REF: L0021CSingle 1.6m with connectors REF: L0019

Single 1.3m without connectors REF: L0019C

Our Single & Twin Shock Absorbing Rope Lanyards are made using a nylon 11mm low stretch rope. This product is the right choice for many different applications. The high-twist 32-strand mantle braid provides for high abrasion protection, better grip, and high dirt resistance. The lanyards are fitted with a large aluminium ring so that the connector on the fly end can be clipped back or parked in position.

TWIN SHOCKABSORBING ROPE

LANYARD

Specifications: Single / Twin Shock Absorbing Rope Lanyards• Colour: White with red fleck, Black on request• Material: Nylon 11mm low stretch rope• Std size: 1.3m - variations on request• Maximum working load 130Kg• Conform to: EN355

All connectors fitted conform to EN362.

Our rope lanyards come in the standard white with red fleck or black on request.

18 19


Specifications: Rope Lanyard• Colour: White with red fleck, Black on request. • Material: Nylon low stretch rope.• Sizes: On request (under 2m).• Sling Strength: 22kN.• Conforms to: EN354:2010• Note: These lanyards are not to be used for fall arrest. Lanyards complying to EN354

must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length.

The Adjustable Rope Lanyard is a good choice for many different applications, with a tensile strength of 22kN, the high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance. This lanyard is ideal for work positioning and work restraint and also passes the full standard EN354.

ROPE LANYARD

The Standard Rope Lanyard has a tensile strength of 22kN. The high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance. The rope lanyard can be made to any required length under 2m.

Specifications: Adjustable Rope Lanyard• Colour: White with red fleck, Black on request. • Material: Nylon 11mm low stretch rope.• Sizes: As above, variations on request• Lanyard strength: 22kN.• Conforms to: EN354:2010 & EN358:1999• Note: These lanyards are not to be used for fall arrest. Lanyards complying to EN354

must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length.

ADJUSTABLEROPE LANYARD

ROPE LANYARDS

REF: L0021F 60cm REF: L001760 1m REF: L0017100 1.5m REF: L0017150 2m REF: L0017200

ROPE LA

NYA

RDS

20 21

Tactical Catalogue 2016/17WORK POSITIONING LANYARDS

Specifications: RAD Work Postioning Lanyards• Average static load with above rope before creep 4kN• Static strength as in the test 15kN for 3mins• Weight: 310g + 80g per Meter of rope• Material: High strength alloy plates and handle anodized with stainless steel

cam and spindles.• Colour: Black• Rope colour: white with red fleck or black on request.• Conforms to: EN358 & EN12841-C

Our RAD (Rope Adjustment Device) evolved from our A-B Descender. Both multi functional devices, the RAD is smaller, lighter and has been tested to and conforms with more European standards for a wider variety of applications.

This means that the RAD can be used as a stand alone device in many more environments, therefore reducing the need for multiple devices and cost for equipment.

The swivel plate screw can be removed and the device opened for changing rope if inadvertently damaged during work, or for fitting onto a descent rope.

It can be fitted with any length of rope you require. The rope used is our 11mm Low Stretch or Rescue rope with a sewn eye at one end and a sewn block/stopper at the fly end.

The RAD can be used in many environments where an adjustable lanyard, pole strap/rope or restraint is required.

The RAD fully conforms to, EN12841-C-06 and EN358-99 system.

RADWORK POSITIONING

LANYARDS

2m, REF: RAD-2M / 3m, REF: RAD-3M4m, REF: RAD-2M / 5m, REF: RAD-2M

2m, REF: RAD-2MH / 3m, REF: RAD-3MH4m, REF: RAD-2MH / 5m, REF: RAD-2MH

2m, REF: RAD-2MS / 3m, REF: RAD-3MS4m, REF: RAD-4MS / 5m, REF: RAD-5MS

WO

RK POSITIO

NIN

G LA

NYA

RDS

22 23


REF: K0001

REF: K0016

REF: K0005L (lobster) REF: K0005B (black)

NSN:8465-99-488-9715

Specifications: Gecko Karabiner• Material: Alloy, anodized black or gold screw gate.• Strength: 30kN• Gate opening strength: 10kN• Sideways strength: 9kN• Gate open size: 22mm • Weight: 84g• Length:114mm• Width: 78mm• Individual serial number• Conforms to EN362

GECKOThe Gecko is versatile and light. The Gecko is made from high grade alloy bar, which is then pressed into shape to give it extra strength.

This karabiner features a key lock design on the nose and gate to stop web catching.

GATORThe Gator karabiner, designed originally for sports climbing, the Gator is used for the rocker back-up sling assembly but is also ideal for use as a small spare karabiner for carrying accessories.

The Gator is made from high grade alloy bar, which is then pressed into shape to give it extra strength. This karabiner features a key lock design on the nose and gate to stop web catching.

KLETThe Klet karabiner is ideal for kits where weight is a factor, and technical rope work required.It has a wide base and excellent gate clearance. Made from high grade alloy bar, which is then pressed into shape to give extra strength, and a high tensile strength for its large size.

This karabiner features a screw closure and its key lock design gives it a catch free gate.

KARABINERS

Specifications: Gator Karabiner

Specifications: Klet Karabiner

• Material: Alloy, anodized black screwgate.• Strength: 25kN• Gate opening strength: 8kN • Sideways strength: 8kN• Gate open size: 15mm• Weight: 58g• Length: 100mm• Width: 64mm• Individual serial number• Conforms to EN362

• Material: Alloy, anodized black or lobster. • Strength: 30kN• Gate opening strength: 11kN• Sideways strength: 10kN• Gate open size: 26mm • Weight: 94g• Length: 119mm• Width: 77mm• Individual serial number• Conforms to EN362

KARA

BINERS

24 25


Specifications: Steel Kelt

STEELKELT

• Material: Steel zinc plated.• Strength: 50kN• Gate opening strength: 20kN• Sideways strength: 15kN• Gate open size: 25mm• Weight: 258g• Length: 119mm• Width: 77mm• Individual serial number• Conforms to EN362

This is the steel version of our alloy Klet karabiner. The steel Klet has the same dimensions as the alloy Klet, a wide base and excellent gate clearance. Its heavier weight has the added benefit of almost doubling the tensile strength of alloy version.

This karabiner features a screw closure and its key lock design gives it a catch free gate.

Available colours

Steel Klet REF: K0007

Specifications: Steel Oval Specifications: Triple Action Snap Hook Specifications: Double Action Snap Hook

STEELOVAL

TRIPLE ACTIONSNAPHOOK

DOUBLE ACTIONSNAPHOOK

• Material: Steel• Strength: 25kN• Gate open size: 18mm• Weight: 174g• Length: 107mm• Width: 56mm• Individual serial numbered on request.• Conforms to EN362

The standard Steel Oval karabiner with screw gate, with a high weight to strength ratio giving a high tensile strength making this a very versatile karabiner.

Available coloursAvailable coloursAvailable colours

• Weight: 138g• Gate opening gap: 22mm• Eye diameter: 20mm• Material: Aluminium• Finish: Anodized• Colour: red/grey, black on request • Minimum breaking strain: 27kN• Individual serial number• Conforms to: EN362

• Weight: 102g• Gate opening gap: 22mm• Eye diameter: 20mm• Material: Aluminium• Finish: Anodized• Colour: Black• Minimum breaking strain: 27kN• Individual serial number• Conforms to: EN362

Steel Oval REF: K00017 Triple Action Snaphook REF: X0079Double Action Snaphook REF: K0002

KARA

BINERS

The Triple Action Snaphook is fitted with a third action catch for increased safety. The safety heel further reduces the risk of accidental opening and the ‘Blind’ nose helps to prevent rope snagging.

The Double Action Snaphook has a Safety Heel to help reduce the risk of accidental opening. This Snaphook also has a ‘Blind’ nose design, to minimise rope snagging.

26 27


DELTA STEELMAILLON

DEE STEELMAILLON

10mm Steel REF: M0001 10mm Black REF: M0001B8mm Steel REF: M0005 8mm Black REF: M0005B

REF: M0006

Specifications: Delta Steel Maillon 10mm• Material: Mild steel galvanised• Strength: break load approx 45kN• Gate open size: 12mm• Wire size: 10mm. Height: 88mm• Width: 66mm• Weight: 158g• Individual serial numbered• Conforms to EN12275 & EN362:05/Q

The Steel Delta maillon is used mainly in rescue and rope access. It is used for three way loads, for equalizing two single pulleys to work as twin, to fix a pulley to an ascender for using it as a pulley brake and as a lifting link on stretcher straps to mention just a few.

The Delta maillon are available in 2 different sizes, 8mm and 10mm.

Specifications: Delta Steel Maillon 8mm• Material: Mild steel galvanised• Strength: 27.5kN• Gate open size: 10mm• Wire size: 8mm• Height: 73mm• Width: 56mm• Weight: 92g• Individual serial numbered• Conforms to EN12275 & EN362:05/Q

Specifications: Dee Steel Maillon • Material: Mild steel galvanised• Strength: 25kN• Gate open size:18mm• Weight: 174g• Length: 107mm • Width: 56mm• Individual serial numbered• Conforms to EN12275 & EN362:05/Q

The Dee Steel maillon was initially used by the sport & caving industry as a front connection to their sit harness. It allows the joining of the two webbing loops and also allows multiple connections of other mailions or karabiners.

REF: M0009 REF: M0012

Specifications: Pear Steel Maillon• Material: Mild steel galvanised• Strength: WLL 720kg• break load approx. 36kN• Gate open size: 20.5mm• Wire size: 10mm• Height: 118m• Width: 65mm• Weight: 184g• Individual serial numbered• Conforms to EN12275 & EN362:05/Q

The Pear Steel maillon is used as an added connection to the front of sit harness, giving a second or third independent connection point.

It is also used in certain techniques in rescue for a multi connection point and its shape gives an added advantage to using the Dee or Delta maillon.

Specifications: Oval Steel Maillon • Material: Mild steel galvanised• Strength: WLL 800kg • break load approx, 40kN • Gate open size: 16mm• Wire size: 7mm• Height: 78mm • Width: 30mm• Weight: 61g• Individual serial numbered• Conforms to EN12275 & EN362:05/Q

The Oval Steel maillon is a long opening maillon and is possibly the most used style of all the maillon products. This maillon will cover most requirements in rope access and rescue, and can be used in lots of different areas.

KARA

BINERS

PEAR STEELMAILLON

OVAL STEELMAILLON

28 29


EN341 is the standard for a descent rescue/egress system and any system conforming to this standard must be used with the type of rope with which it was tested.

Any strength quoted is when the product is new and is in accordance with the appropriate standards.

A-B DESCENDER

Specifications: A-B Descender• Colour: Black or Gold• Rope: 10.5mm to 12.5mm kernmantle• Max Load: 300kg• Control: Leaver/Cam & panic grab brake• Weight: 442g• Conforms to EN341-B and EN12841-C

Sample tests:• Min. Static Slip: 4.5kN 10.5mm x 22 plait • Route 44 Singing rock, 5.5kN 24 plait SAR. 8kN 12.5mm x 20 plait Cousin • Dynamic impact and slip distance 100kg FF1-1M: 10.5mm = 5.1kN & 51cm 6.2kN &

26cm, 12.5mm = 7kN & 15cm

Our A-B Descender has been designed for technical rope access, intervention, and rescue. It has a handle style control that can be used in two modes, either squeeze the handle or flip it down to give extra leverage when required. There is a spring fitted to help keep the handle close to the body when not in use and is also fitted with a panic grab brake.

The A-B fully conforms with two European standards, these are; EN12841-C rope adjustment device (descenders) and EN341-Bdescenders for rescue. The two standards are very different, EN12841-C covers the device only, so that it can be used with different types of kernmantle rope.

ASCENDERS & DESCENDERS

Gold A-B REF: RA002Black A-B REF: RA002B

NSN: 4240-99-244-1085

ASC

END

ERS & DESC

END

ERS

To view instructional video about the A-B Descender, scan QR code

30 31


Black Pro ALLP Tech REF: RA001BRAD REF: X0147

Specifications: Pro ALLP Tech• Control: Screw and Lever• Weight: 575g• Min Static slippage: 3.5 kN• Min Static load: against a barrel knot: 15kN• Max Impact:100kg mass F.F.2 with 1m strop: 6kN

Specifications: RAD• Weight: 310g• EN12841:2006-C - 10.5-12.7mm Rope Diameter rated to 200kg• EN358:1999 - 10.5-12.7mm Rope Diameter rated to 200kg• EN15151-1:2012 Type 6 - 9.9-11mm Dynamic Rope Diameter• Material: High strength alloy plates and handle anodized with stainless steel cam and

spindles.

PRO ALLP TECHRAD

The Pro ALLP Tech was the result of years of technical development and research and was originally designed for technical rescue. The screw control system of the Pro ALLP Tech has a very fine speed control which allows the technical rope user a finer management of descent, especially in rescue.

The Pro ALLP Tech was the first descender to be tested to prEN 12841-C rope adjustment devices. Most personnel are lead to think that EN341 is the standard for descenders but this is incorrect. EN341 is descenders for rescue, which is a system, not an item of equipment, to fully conform with this standard the descender must be sold with the correct rope as a package.

Our RAD (Rope Adjustment Device) evolved from our A-B Descender. Both multi functional devices, the RAD is smaller, lighter and has been tested to and conforms with more European standards for a wider variety of applications.

This means that the RAD can be used as a stand alone device in many more environments, therefore reducing the need for multiple devices and increased cost. The RAD is capable of being used in many environments as a belay device or as a descender.

The Pro ALLP Tech was tested under laboratory conditions and was proven to be compatible with low stretch ropes of 10.5 to 12.7mm from one manufacturer, in compliance with EN1891. The Pro ALLP Tech was also tested with a 200kg mass at F.F.1 1M.

We strongly recommend the that users be trained in the many applications of the Pro ALLP Tech.

The RAD is an ideal small & light weight descender for peronal military issue.

The device fully conforms to, EN12841:2006-C, EN15151:2012 Type 6 & EN358:1999

ASC

END

ERS & DESC

END

ERS

32 33


CHEST CROLL

Specifications: Chest Croll

This ascender was designed to fit flat against the body around the upper stomach/lower sternum area of the chest. Use along with a handled ascender and foot loop for ascending rope.

It can be connected to any of our harness range. Our Kite chest harness has the required connection strap included in its design to fit into the top strap hole of the Croll without the need for an extra shoulder strap.

ASCENDERCLEAN CAMASCENDER

FIGURE OF 8WITH EARS

Specifications: Clean Cam Ascender

Left Handed REF: RA004 Right Handed REF: RA005

REF: RA009REF: RA017

• Material: Anodized Aluminium• Colour: Black • Fits Rope Size: 8 to 13mm• Weight: 148g• Standard: EN567, EN12841• From summer 2015 this product will also conform to EN1284:2006-B for 10 - 13mm

rope at 100kg

Specifications: Ascender• Material: Anodized aluminium.• Colour: Right Handed - Lobster, Left Handed - Silver, or all black • Fits Rope Size: 8mm to 13mm• Weight: 216g• Conforms to EN567

The Ascender is made for continuous use in the most arduous of conditions.The frames are machined from high strength extruded aluminium and have a stainless steel cam.

This product comes as right or left handed, the right having a green handle and the left red. When tested on a 12.7mm superline there was a primary failure of the rope sheath at 11kN with the ascender still operable.

The Clean Cam ascender is made for continuous use in the most arduous of conditions. The frames are formed using high strength aluminium plate and it has a stainless steel self clean cam. The handle grip is of soft moulded nylon.

This product comes as right and left handed. Right handed having a orange body & the left handed having a silver body. The product is also available in black if requested for both left & right handed.

• Material: Anodized aluminium. • Colour: Left Handed - Black, Right Handed - Grey• Weight: 400g• Rope dia: 10 to13mm• Conforms to EN567

Lobster R/H REF: RA023L - Silver L/H REF: RA022SBlack L/H REF: RA022B - NSN: 8465-99-153-7623Black R/H REF: RA023B - NSN: 8465-99-687-3300

Specifications: Figure of 8 With Ears• Rope size: 9 – 13mm dia.• MBS: 35kN• Colour: Black

The Figure of 8 descender is used for lowering or abseiling. Manufactured from high strength aluminium alloy. It has a large eye with room for an extra karabiner and ears to prevent the rope rolling into a locked position. The figure of 8 does twist the rope and is best used on firm rather than soft rope. It is not recommended for use with rope that comes straight out of a rope bag.

It should only be used with a back-up safety lock, such as a Rocker or Prussic style rope lock.

ASC

END

ERS & DESC

END

ERS

34 35

Tactical Catalogue 2016/17BACK UP DEVICES

Gold Rocker REF: RA003 Black Rocker REF: RA003BNSN: 4240-99-820-0579

ROCKER

The Rocker is primarily used as a safety back-up in industrial rope access, fire service or technical rescue as a fall arrest device in the event of main line failure.

It can also be used as a rescue back-up device for two people as the Rocker has been tested for this purpose using a 200kg mass in a fall factor two scenario. The test was undertaken using an 11mm 32plait low stretch rope and a 1M sling. The maximum impact recorded was 5.7kN, with a slip distance of 1.10M.

The Rocker complies to EN353-2:02 EN358:00 and EN12841-A:06. We recommend it to be used with a 10 cm Rocker link sling with two Gator karabiners. This set up comes as a kit for use with the Rocker and we highly recommend it to be connected to the chest connection point on the harness. This would put the user in an upright position and is therefore compliant with fall arrest standards. It is for this reason it is also not recommended to be used with a long cow’s tail from the waist connection point of the harness.

This device can also be used in many other situations i.e. as a hauling/pulley bake etc.

The Rocker was confirmed in the U.K. H.S.E. industrial rope access investigation into items of personal protective equipment as the best performer and to have the highest degree of consistency.

We strongly recommend that users be trained in use of the Rocker.

Specifications: Rocker• Average static load: 3.5kN• Max dynamic impact: 5.9kN• Static strength: 15kN• Max dynamic impact: 200kg 5.7kN• Max Static 350kg• Weight: 169g• Material high strength alloy with hard anodising on cams• Colours: Black or Gold

Uses:• Fall arrest back up device• Work positioning locking device• Horizontal safety line absorbing anchor• Rope Access & Rescue safety back-up• Pulley brake• Ascender• Belay brake

Rocker Sling Assembly REF: S0014

BAC

K UP D

EVICES

36 37

Tactical Catalogue 2016/17PULLEYS & PULLEY SYSTEMS

STANDARD PULLEYS

Single Pulley REF: P0016 Double PulleyREF: P0019

Specifications: Single Standard Pulley • Side plate size: Height 90mm• Width 52mm• Material: High grade alloy• Colour: Black or Gold• Strength: 36kN• Weight 158g• Standard: EN12278• Max 13mm rope• Individual serial number• Conforms to EN12278

Specifications: Double Standard Pulley• Side plate size: Height 110mm• Width 52mm• Material: High grade alloy• Colour: Black or Gold• Strength: 36kN• Weight 284g• Standard: EN12278• Max 13mm rope• Individual serial number• Conforms to EN12278

MINI PULLEYS

Single Pulley REF: P0010 Double Pulley REF: P0014

Specifications: Single Mini Pulley • Side plate size: Height 75mm• Width 45mm• Material: High grade alloy• Colour: Black or Gold• Strength: 36kN• Weight 87g• Standard: EN12278• Max 13mm rope• Individual serial number• Conforms to EN12278

Specifications: Double Mini Pulley• Side plate size: Height 94mm• Width 44mm• Material: High grade alloy• Colour: Black or Gold• Strength: 36kN• Weight 153g• Standard: EN12278• Max 13mm rope• Individual serial number• Conforms to EN12278

PULLEYS & PU

LLEY SYSTEMS

SINGLE DOUBLE ENDED PULLEYThe Single Double Ended pulley is used in systems along with the double pulley.

It can be used for all the same uses as the standard single with a extra connection point.

Single Double Pulley REF: P0018

Specifications: Single Double Ended Pulley• Side plate size: Height 126mm• Width 52mm• Material: High grade alloy• Colour: Black or Gold• Strength: 36kN• Weight 181g• Standard: EN12278• Max 13mm rope• Individual serial number• Conforms to EN12278

38 39

Tactical Catalogue 2016/17BAGS

ROPE BAGS

Our Rope Bags come in four sizes and six different colours, blue being standard.

All SAR bags have an outside pocket for any documentation such as the rope record card, draw cord closure and fitted stainless steel hauling karabiner.

Our small bag has one simple adjustable shoulder carrying strap. The medium, large and extra Large bags have twin adjustable shoulder straps and a side carrying strap. All the bags are made from heavy duty high grade PVC reinforced polyester. Camoflauge bags are made from heavy duty cordura.

Small REF: B0003 Medium REF: B0006Large REF: B0009 X Large REF: B0012

BAG

S

EQUIPMENTBACKPACK

REF: B0015

The Equipment Backpack has been designed for rope access and rescue personnel to carry their individual equipment such as harness, helmet, slings, karabiners etc.

On the outside front panel is an equipment draw cord for carrying such items as rope, splints, etc.

It has two rucksack style shoulder straps and top carrying handle.

Specifications: Rope Bag Specifications: Equipment Backpack• Small bag: 20Ltrs or 66m of 11mm rope • Medium bag: 30Ltrs or 100m of 11mm rope • Large bag: 50Ltrs or 200m of 11mm rope• X Large bag: 84Ltrs or 250m of 11mm rope

• Size: 30Ltrs or 100m of 11mm rope


40 41


Specifications: Rope Leg Bag• Weight: 280g• Rope Capacity: 50m of 11mm rope• Colours: Black or Camouflage

Specifications: Equipment Bag• Weight: 380g• Rope Capacity: 50m of 11mm rope• Colours: Black

Specifications: 75L Equipment Holdall• Weight: 1.4kg• Colours: Black or Camouflage

Specifications: 35L Equipment Holdall• Weight: 680g• Rope Capacity: 50m of 11mm rope• Colours: Black or Camouflage

ROPELEG BAG

REF: B0014

The Rope Leg Bag has been designed looking at slight modifications to the standard to enhance the fit and securing system. Made from heavy duty black cordura nylon with velcro leg securing straps, foot loop/stirrup strap and a hand carry strap which will allow the user to clip the bag onto their harness if required.

Equipment BAG

REF: B0016SARBK

CRAGKIT BAG

REF: B0026

Designed in association with Oldham Mountain Rescue Team, the Crag Kit Bag contains several compartments on internal folding walls. It is an ideal way to keep all of the kit in one bag and is easy to access. The bag comes complete with shoulder straps.

EQUIPMENTPOUCH

Small REF: B0021 Medium REF: B0024 Large REF: B0025

Our Equipment Pouches come in three sizes and are made from heavy duty cordura nylon. The smallest is mainly used as a harness pouch, the other two for equipment storage within your equipment bag. They have velcro belt loops that can be used to strap them on your carrying bag or back pack.

35L EQUIPMENTHOLDALL

REF: B0018

The 35L holdall is a standard simple design with a single zip closure with reinforced carrying handles. The bag is made from the same high quality material as our rope bags and equipment backpack. The holdall is available in six different colours, blue being standard.

75L EQUIPMENTHOLDALL

REF: B0019

The 75L equipment holdall has been designed for rope access and rescue personnel to carry their individual equipment and for those wishing to pack team equipment into one bag.

The twin zip flap lid allows the user to access all areas of the bag with ease. The bag has two carrying strap handles that are reinforced around the base of the bag, two drag handles at each end that can be used for hauling vertically when required and two padded shoulder carrying straps.

The Equipment Bag is a multipurpose draw string bag made from heavy duty cordura nylon. The bag has an adjustable shoulder strap, drain hole, and a steel spring hook so you can attach it to other equipment and gear loops.

Specifications: Equipment Pouch• Small: Height 15cm x Width 9cm x Depth 5cm• Med: Height 20cm x Width 16cm x Depth 7cm• Large: Height 23cm x Width 18cm x Depth 7cm• Colour: Black or Camouflage

Specifications: Crag Kit Bag• Weight: 1kg• Colours: Black or Camouflage

BAG

S

42 43

Tactical Catalogue 2016/17ROPE & CORDAGE

The 11mm Rescue & Access Tactical Rope has been developed to withstand heavy loads for e.g. winches, dirt and climatic influences. The rope is extremely robust and compact and also soft in handling making it ideal for tactical intervention and rescue. The rope has a tensile strength of 32kN.

Specifications: 11mm Rescue & Access Rope• Diameter 11mm. • Conforms to EN1891-A• Material: Low stretch nylon• Outer plait: (sheath) 16• Outer braids 32• Inner core 14• Static strength:32kN• Static strength fig 8 knot: 18kN• Static strength fig 10 knot: 22kN• Elongation: 3-5%• Colours: Black and white with red fleck• Free cutting and labelling service on orders. • Rope can be cut up to 200m on standard orders and 700m on special request.

Specifications: 6mm & 8mm Accessory Cord• High-grade polyester• High-twist 32-strand mantle braid• Slip-proof, dirt-resistant, abrasion-resistant• 6mm and 8mm• Minimum breaking strength 6mm Cord 940daN • Minimum breaking strength 8mm Cord 1400daN

6mm Accessory Cord REF: RR00128mm Accessory Cord REF: RR013

The Prusik cord is made of high-grade polyester and is used for Prusik slings and for universal applications. The high-twist 32-strand mantle braid makes the accessory cord immune to dirt and provides for ergonomic handling and high abrasion resistance. High-quality manufacturing provides for high strength and a low danger of cracking.

11mm RESCUE& ACCESS ROPE

ACCESSORYCORD

REF: RR002B NSN: 4020-99-887-0485

ROPE & CO

RDA

GE

44 45


We can now offer a sewn eye termination on any length of 11mm rope that we stock in our range. The sewn termination has passed the test requirements of a sewn termination.

All rope sewn terminations are marked up with a unique serialnumber, length, rope diameter, and year of manufacture.The sewn eye is also covered with a transparent protective sheath that helps protect the stitching against abrasion and the ingress of dirt but allows for the ease of inspection.

The Edge bars have been designed as a caterpillar/edge roller style rack. Made in two segments of four 12.5mm dia. x 100mm stainless steel fixed bars. The two segments with two bars each give a total length of 32cm. Each segment is joined by two small steel maillons so they can be disconnected and used as two separate units if required, or others can be added. The sections can be used either way up keeping the bars high or low off the surface.

The full unit comes with in an Equipment Pouch that can be fitted to a belt or back pack straps.

Our Cliff Edge Roller was designed to be a heavy duty alternative to other rope other edge protectors. It is fitted with under frame spikes to allow it to grip into the ground this roller.

Heavy Duty Rope Protector REF: RR020

Our heavy duty Rope Protector is made from high quality polyester. They are extra thick giving more protection over sharp edges than the standard Rope Protectors.

Standard Rope Protector REF: RR021

These are made from PVC reinforced polyester sheet material available in blue, red, black or yellow. On running ropes both the above can glaze due to friction, but specials can be made from canvas.

Specifications: Stitched Rope Eye• Static strength 22kN.

Specifications: Rope Protectors Heavy duty

• 15cm wide• 50cm Long• Velcro fastener• 4mm cord tab• Colour: Red

Specifications: Edge Bars• Stainless steel bars• Aluminium powder coated side plates• Segment/unit length: 150mm• Segment/unit width: 100mm• Weight (inclusive of maillons): 332gm per segment.• Total weight inc. Equipment pouch: 728g

Specifications: Cliff Edge Roller• Stainless steel • Length: 700mm• Width: 367mm• Weight: 3.75kg • Working Length of roller: 250mm

Standard• 15cm Wide• 70cm Long• Velcro fastener• 4mm cord tab• Colours: Yellow or black

ROPE & CO

RDA

GE

REF: RR015 REF: RA015REF: RA021REF: RR020REF: RR021

STITCHEDROPE EYE

EDGEBARS

CLIFF EDGEROLLER

ROPEPROTECTORS

46 47

Tactical Catalogue 2016/17STRETCHERS & ACCESSORIES

EVACBODY SPLINT

Specifications: Evac Body Splint - Black• Width: 68cm• Length: 205cm• Packed size inc. bag: 75 x 30cm• Weight: 7.2Kg• The SAR Evac stretcher conforms to EC DECLARATION OF CONFORMITY 93/42/EEC

concerning medical devices. Article 11 (5) and annex VII Class 1 devices.

Specifications: Evac Body Splint - Camoflage• Width: 68cm• Length: 205cm• Packed size inc. bag: 75 x 30cm• Weight: 6.8Kg• The SAR Evac stretcher conforms to EC DECLARATION OF CONFORMITY 93/42/EEC

concerning medical devices. Article 11 (5) and annex VII Class 1 devices.

We are always striving to keep at the forefront of development & design. As a result of this we have once again improved our EVAC body splint. The thickness of the lower outer skin has been increased to give more resistance to abrasion, whilst using a new lightweight material on the upper skin in order to maintain the overall weight of the item. We have also changed the head strap to give two fitting systems to give a firmer head restraint.

The EVAC has a width of 68cm across both the shoulder and hip areas and is 205 cm long, giving more security and protection to the casualty.

It has six horizontal lifting loops, three down each side, positioned along the main trunk/torso of the casualty. All the main casualty securing cross straps are of 50mm webbing with adjustable clip buckles. It has an integral body harness made from 25mm web with crutch padding and adjustable foot support with padding for extra security and to stop body slip when in a vertical or angular mode of lift.

The two main vertical lifting loops are positioned at the shoulder which gives a true vertical lifting position for the casualty. The head section can be formed into a cone to disperse debris when dragging through confined spaces.

The strap holding the Body Splint in position when rolled has a fitted pad and can be used for a head restraint by threading it around the outer loops on the coned area.

It can also be used as a lifting mat without the use of the straps. Two people can transfer a casualty from one flat area to another keeping the casualty in a horizontal mode.

REF: ST003

STRETCH

ERS & ACC

ESSORIES

48 49


ALPINE STEEL STRETCHER

The new Alpine stretchers have been designed with the ever growing population in mind. It is slightly larger all round as the section from the shoulders to the hips has been made parallel and the length has been increased by 10cm. The flat bed style of the Alpine stretchers gives excellent security for spinal injuries and makes the loading of the casualty much better than a basket type stretcher, allowing far more casualty care.

All versions of the Alpine stretcher fold in half ski to ski to facilitate easy backpacking by one person, to reduce bulk on the carriers back and for economical storage. When the stretcher is opened to receive a casualty it is not reliant on the side locks to remain secure when in the horizontal position, however the locks are required when being used for vertical lifting, when sliding/ sledging over edges or rough terrain.

The mountain rescue (MR) stretcher has a ski pan set between the head end skis for ease of sliding over rough terrain and snow but more importantly to protect the casualty’s back from rocks etc. The Alpine can be split if required for long carries into casualty sites but due to the lightness of the stretcher this is not always necessary.

Both stretchers come with casualty securing straps and lifting straps, (MR 2 metres, CR 1.2 metres) and these may be used for lifting, winching, carrying, sledging or as pulling straps.

Both come with storage bag that has a single padded shoulder carrying strap and outside pouch for inspection record card. Both will accept the fitting of carrying handles but on the MR stretcher they come as standard.

Both will accept the fitting of the SAR wheel and head protection canopy. These must be ordered separatley.

Both Stretchers Conform To:EC Declaration Of Conformity 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices.

STRETCH

ERS & ACC

ESSORIES

50 51

ALPINELITE STRETCHER

The new Alpine Lite stretchers have been designed with the ever growing population in mind. It is slightly larger all round and the section from the shoulders to the hips has been made parallel and the length has been increased by 10cm. The flat bed style of the Alpine lite stretchers gives excellent security for spinal injuries and makes the loading of the casualty much better than a basket type stretcher, allowing far more casualty care. All versions of the Alpine stretcher fold in half, ski to ski, to facilitate easy backpacking by one person, to reduce bulk on the carriers back and for economical storage.

When the stretcher is opened to receive a casualty it is not reliant on the side locks to remain secure when in the horizontal position, however the locks are required when being used for vertical lifting, when sliding/sledging over edges or rough terrain. The mountain rescue (MR) stretcher has a ski pan set between the head end skis for ease of sliding over rough terrain and snow, but more importantly to protect the casualty’s back from rocks etc.

Also the ski sections have an added high grade polyethylene ski fixed to them as a protection for the alloy over rock, gravel or any other hard abrasive surface.

The stretchers can be split if required for long carries into casualty sites but due to the lightness of the stretcher this is not always necessary.

Both stretchers come with casualty securing straps and lifting straps, (MR 2 metres, CR 1.2 metres) and these may be used for lifting, winching, carrying, sledging or as pulling straps.

Both come with storage bag that has a single padded shoulder carrying strap and outside pouch for inspection record card. Both will accept the fitting of carrying handles but on the MR stretcher they come as standard.

Both will accept the fitting of the SAR wheel and head protection canopy. These must be ordered separatley.

Both Stretchers Conform To:EC Declaration Of Conformity 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices. The stretcher has been lifted by the RAF in exercise with the Oldham Mountain Rescue Team and found to be no different in handling to that of the steel version.

Specifications: Alpine CR Lite• Stretcher: 11kg• Lifting straps: 1.2M - 1.40kg• Length open: 210cm• Length folded: 105cm• Max width: 60cm• Runner depth: 9cm• Stretcher depth: 12cm• Powder Coated Silver Metallic

Specifications: Alpine MR Lite• Stretcher: 12.45kg• Handles: 2.45kg• Lifting straps: 2m - 1.60kg• Length open: 210cm• Length folded: 105cm• Max width: 60cm• Runner depth 9cm• Stretcher depth: 12cm• Powder Coated Silver Metallic

Specifications: Alpine MR• Stretcher: 15.02kg• Handles: 3.42kg• Lifting straps: 1.80kg• Length open: 2.1m• Length Folded: 1.05m• Max width: 60cm• Runner depth 7cm

Specifications: Alpine CR• Stretcher: 13.45kg• Lifting straps: 1.75kg• Length open: 2.1m• Length folded: 1.05m• Max width: 60cm• Runner depth: 7cm

ALPINE CR (Civil Rescue) REF: ST001L ALPINE MR (Mountain Rescue) REF: ST002L ALPINE STRETCHER CR (Civil Rescue) REF: ST001 ALPINE STRETCHER MR (Mountain Rescue) REF: ST002


EVACLIFTING SLING

Specifications: Evac Lifting Sling

The EVAC lifting slings have been designed for rescue and are made up of items conforming to the relevant standards for (PPE) personal protective equipment. They are for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can be used in both horizontal and vertical positions.

The complete set is made up of 4 x 60cm twin eye lanyards, 4 steel oval karabiners and 2 medium and 1 large delta maillons. Each of the items can be used independently if needed. They come complete with their own equipment storage pouch.

REF: ST021

• Standards conforming to: Lanyards EN354, EN566, & EN795-B, Karabiner EN362 and Maillons EN362:05/Q & EN12275

• Max length of each leg including connectors:73cm• Weight Complete with connectors: 1.2kg• Weight of Bag: 58g• Standard Colour: Orange

Basket Stretcher Lifting Slings

Specifications: Alpine MR 2m Adjustable Stretcher Lifting Slings• Tensile Strength of each Strap 11kN • 2 Strap vertical lift = 22kN• 4 straps horizontal lift = 44kN• All connections using Maillons EN362:05/Q & EN12275• Weight: 1.6kg

Specifications: Alpine CR 1.2m Adjustable Stretcher Lifting Slings• Tensile Strength of each Strap 11kN• 2 Strap vertical lift = 22kN.• 4 straps horizontal lift = 44kN• All connections using Maillons EN362:05/Q & EN12275 • Weight: 1.4kg

Specifications: Basket stretcher 1.2m Adjustable Lifting Slings• Tensile Strength of each Strap 11kN• 2 Strap vertical lift = 22kN• 4 straps horizontal lift = 44kN • Central connections: 3 x Maillons EN362:05/Q & EN12275.• Stretcher Connection: Extra large karabiner 40kN EN362 with a 48mm gate

opening. • Weight: 2.5kg

STRETCHERLIFTING SLINGS

The Adjustable Stretcher Lifting Slings have been designed for rescue, therefore are not (PPE) personal protective equipment. They are adjustable liftings slings for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can also be used for lifting and lowering in both horizontal and vertical positions.

They can be used for side carrying, sledging slings, or used as front and back man carrying yolk/harness by connecting them to the stretcher handles.

The Adjustable lifting Slings have been approved for lift by RAF SAR Force UK.

Alpine CR 1.2m Adjustable Stretcher Lifting Slings REF: ST007 Alpine MR 2m Adjustable Stretcher Lifting Slings REF: ST016Basket stretcher 1.2m Adjustable Stretcher Lifting Slings REF: ST008

Stretcher Lifting Slings

STRETCH

ERS & ACC

ESSORIES

ALPINE STRETCHERWHEEL & HANDLES

Steel Stretcher Wheel REF: ST004 Lite Stretcher Wheel REF: ST004LSteel Stretcher Handles REF: ST014 Lite Stretcher Handles REF: ST014L

The wheel frame has been designed to be assembled quickly and easily by just slotting the foot end forks into the main front forks. The frame connects onto the stretcher bed frame in four places. The angle of the frame down to the wheel puts all the downward force onto the wheel axle as is normal with a bike.

Our stretcher handles have been redesigned to improve the fitting system. They are now fitted using a screw making it eaiser to fit and to give more security. Adaptation kits can be bought to bring the older stretcher handles in line with the latest development.

52 53

Tactical Catalogue 2016/17QUADPOD & WINCH

REF: QU001

The Quadpod is now being used all over the world by many rescue organisations, military units and the UK coastguard.

The Quadpod can be used in many modes and gives greater access to areas that tripods or other devices cannot access. The head of the Quadpod has multi-connection points, and up to two legs can be disconnected for special uses or transportation.

It has been found that the need to have a 2.3m - 2.5m centre height for confined space rescue is not necessary when using the Quadpod. The extraction of casualties in body splints/stretchers once partially extracted can be brought out the rest of the way at an angle giving more casualty care, room and stability.

The Quadpod comes complete with leg straps and a storage bag.These products can also be purchased separately.

QUADPOD

The Quadpod is a multi adjustable portable anchor. It was designed to supersede the tripod design to provide more stability and reliability during a rescue situation.

Specifications: Quadpod Materials & Coatings:

• Legs: Aluminium powder coated• Head: Stainless steel powder coated• Eye bolts & pins: Stainless steel & mild steel nickel plated.• Feet: Flexible studded rubber• Straps: Polyester webbing, hooks steel nickel plated.• Leg Adjustment: 10 holes on each leg• Max height as Std pyramid: 2m• Packed size in bag: 1.2M x 17cm dia• Standard: EN 795-B• WLL in a standard pyramid shape 500Kg.

Weight:• Quadpod: 12.8Kg • Leg straps: 1.0Kg

QU

AD

POD

& WIN

CH

54 55


QUAD LEG STRAPS

Specifications: Quad Leg Straps

The Quadpod leg straps come as standard when ordering the Quadpod. The straps are light to carry and pack into the bags’ side pouch. They are extremely fast to connect and have very fine adjustment.

QUADPODBAGREF: QU003 REF: QU002

• Materials: Polyester webbing, mild steel plated buckle• Plated hardened steel hooks• Colour: Black or Orange• Weight: 1kg per set of 4• Strength: 300kg each strap

The Quadpod bag comes as standard when ordering the Quadpod. The bag has an adjustable strap for carrying over the shoulder and has two storage compartments for straps, documents etc.

Specifications: Quadpod Bag• Heavy duty PVC• Side pouch for leg straps/documentation. • Blue as standard• Colour: Blue or Black

WINCH

Specifications: Winch• Two Speed: 3 – 1 & 9 – 1.• Separate handle• Weight: 12.8Kg• Complete with storage bag

Materials: • Winch: Stainless steel and brass• Bracket: High grade alloy, pins in plated mild steel

The winch has been made to fit in various positions on our Quadpod. It can also be used separatley from the Quadpod, however this would require training for the users.

Our winch can be used with kernmantle rope size between 10.5-12.5mm. The lifting load is dependent on the type of rope and the number of turns on the capstan before fitting into the self tailing guide.

As a guide, using 11mm rope with two turns on the capstan, then a third turn placed onto the self tailing guide and into the gripping flange, the maximum load it will take is approx. 250kg. At this load the rope will start to slip in the gripping flange so as not to over load the system. One person can lift or lower two people easily.

There should always be a safety back-up system in place and a rope lock on the main rope i.e. SAR Rocker. We strongly advise that users be trained in its many uses and learn about its physical strengths and weaknesses.

REF: QW001

QU

AD

POD

& WIN

CH

56 57


Industrial Helmet - EN397On the Industrial helmet the ventilation holes are closed. The chinstrap is designed to open in case of collision: opening at 25 daN (according to european standard EN397 for safety helmets). The helmet meets the following optional requirements: lateral deformation and low temperature use (-30°C).The helmet is provided with clips for fixing a headlamp. It is suitable for all types of work at height and for industrial use.

Mountaineering Helmet - EN12492This helmet has a new UP/DOWN adjustable size system for better fitting and comfort. Headband covered with anallergic textile.The helmet is provided with clips for fixing a headlamp.This helmet has been designed for canyoning, mountaineering, ice climbing, caving & sport climbing.It is also suitable for school camps and adventure parks.

The Master Helmet has been styled and produced by Rock in Italy.

HELMETS & ACCESSORIES

HELMETS

The Ground Spider is made from a high specification alloy bar and each spike inter-folds along the main bar for storage and stops the spike from damaging other equipment or causing injury. The Ground Spider comes with its own storage bag made from heavy duty nylon cordura. Each leg is linked using a 18mm x 60cm round sling and a medium delta maillon both of which conform to the relevant EN standards. All the items are in black and pack away to an approximate size of 40cm long and 7cm in diameter, tapering to 4cm.

There is no formal test procedure or standard for this item, however it has been load tested to 15kN and it held for three minutes as required in most EN standards. Users must be competent and trained and fully understand how it holds on different types of ground.

Specifications: Helmets

Industrial Helmet:External shell: ABS (Acrylonitrile Butadiene Styrene).Internal shell: High density polystyrene (EPS)Size: Unisize 54/62 cmSide Clips for head lamp elasticWeight: 400g

GROUNDSPIDER

Ground Spider REF: RS007

Specifications: Ground Spider• Material: Main bars, aluminium powder coated• Sling: Superweb polyester• Maillon: Steel plated• Bag: Nylon cordura• Colour: Black• Leg length: 3 x 33cm and 2 x 26cm• Spike length: 5 x 15cm• Sling: 60cm Circ. x 18mm superweb• EN354, EN566 & EN795-B• Delta maillon: 8mm EN362:05/Q & 12275• Weight: 832g• Strength: Lab test only, 15kN

Mountaineering Helmet:External shell: ABS (Acrylonitrile Butadiene Styrene).Internal shell: High density polystyrene (EPS)Size: Unisize 54/62 cm Side Clips for head lamp elasticWeight: 395g

Both helmets are available with anti-scractch clear visor (small or large) on request.

REF: HP004

HELM

ETS & ACC

ESSORIES

58 59


RIGGING PLATES

Rigging plates were developed for putting multiple connections into one point or anchor. They are to help clean up a system of multi connections and to help stop twist from karabiner to karabiner.

Small REF: RS015 Medium REF: RS016

Large REF: RS017

ROPE GLOVES

REF: RS011

Our technical rope gloves have been designed with the user in mind and not just as an abseiling glove. Normal abseiling gloves are thick, stiff, bulky and heavy. Our glove can be worn and used as a general purpose glove. With its cut off thumb and first finger it can be used on jobs that require fingertip control.

FOOTLOOPS

5 RUNGETRIER

Our single & twin foot loops are fully adjustable using an alloy grip tight buckle, 25mm hard wearing polyester web and a reinforced foot loop.

The 5 Rung Etrier is made from our 18mm superweb. It comes with its own storage bag that can be connected to your harness when not in use.

This is not for use as PPE (Personal Protective Equipment) as there is no standard for this type of product. You must always use a separate sling or rope as your safety.

Specifications: Large Rigging Plate• Material: Anodised high strength aircraft alloy • Minimum breaking load: 45kN• Weight: 442g• Hole: 20mm• Length: 249mm • Width: 150mm

Specifications: Medium Rigging Plate• Material: Anodised high strength aircraft alloy • Minimum breaking load: 40kN• Weight: 219g• Hole: 20mm• Length: 160mm • Width: 100mm

Specifications: Small Rigging Plate• Material: Anodised high strength aircraft alloy • Minimum breaking load: 36kN• Weight: 93g• Hole: 20mm• Length: 91mm • Width: 84mm

5 Rung Etrier REF: RS014

They are increasing in popularity with Fire & Rescue rope teams, avaliable in three sizes, small, medium, and large.

Specifications: Rope Gloves• Sizes: Medium, Large, XXLarge• Weights: Medium - 70g

Large - 76g XXLarge - 84g

•

Specifications: Foot Loops Specifications: 5 Rung Etrier• Max working length 1.75m• Min working length 45cm• Weight of single 154g • Weight of double 194g

• Max working length 175cm• Min working length 45cm• Weight of single 190g

Single REF: RS012Twin REF: RS013


HELM

ETS & ACC

ESSORIES

60 61


T: +44 (0) 161 621 0309E: [email protected] W: www.sar-products.com Sarena House, Vulcan Street, Oldham, OL1 4LQ

Specialist Access & Rescue Products Ltd. Terms and Conditions

1. (i) Goods are supplied subject to these terms and conditions which override any conditions of sale stipulated by the Buyer, unless specifically agreed in writing by Specialist Access & Rescue Products Ltd a company registered in England and Wales with company number 04881460 and whose registered office is at 18 Fernthorpe Avenue, Uppermill, Oldham OL3 6EA (“SAR”). Buyer means any person or entity who places an order for Goods with SAR. Specialist Access & Rescue Products Ltd.

(ii) Goods means those Goods supplied by SAR and ordered by the Buyer. No waiver orvariation by SAR of any terms or of any breach of a contract committed by the Buyer shallbe considered as a waiver or variation of any subsequent contract terms or any subsequentbreach.(iii) Goods supplied for re-sale by SAR are only for sale by the Buyer from their own premises,unless otherwise agreed.(iv) SAR reserves the right to amend specifications and or prices as necessary and to decline to supply.(v) SAR expressly warrants that the Goods supplied by it comply with relevant specifications which accompany those Goods. No other term, condition, warranty or representation (whether express or implied by statute or usage) as to the nature, quality or fitness of the Goods to their conformity with any description or sample is given by SAR and the Buyer.(vi) Only a Director of SAR may make representations on behalf of SAR in respect of matters to which this contract relates, and such representations must be written to bind SAR.

Good designis something to be proud of.

SAR Products - Terms & Conditions

No other person is authorised by SAR to make representations on its behalf.

2. All prices quoted are exclusive of V.A.T. and other duties or taxes, unless otherwise specifically stated.

3. Orders will be despatched by SAR’s method and choice of carrier, unless agreed otherwise prior to despatch by SAR.

4. (i) Where Goods are supplied on a pro-forma basis those Goods will be dispatched only upon receipt of cleared funds. When paying by cheque, please allow 5 working days for clearance.(ii) SAR will not offer any settlement discount on pro-forma orders.(iii) SAR reserves the right at any time to review any credit arrangements which it makes with any Buyer and to cancel such credit facilities without notice.

5. (i) Orders are placed by the Buyer however they are only contractually binding from the time of acceptance by SAR (“Orders”). Cancellations of Orders can only be accepted with prior written agreement from SAR. (ii) Cancellations received after dispatch will incur a handling charge. Goods are to be returned at the Buyer’s expense and in the same condition as when despatched by SAR. (iii) Once accepted by SAR, an Order for any non-standard goods (meaning goods which have been manufactured to the Buyer’s own instructions and which would not otherwise be manufactured by or on behalf of SAR) is binding and cannot be cancelled.(iv) Standard Goods returned (which will be subject to a handling charge) must be current

model and packaged in re-salably condition and received in the same condition as when despatched by SAR. (v) The Buyer must accept the Goods even if delivered late. Time of delivery is not of the essence of the contract. If the contract is one to be delivered in installments, the failure to deliver one instalment does not entitle the Buyer to terminate the contract.(vi) If the Buyer fails to take delivery of the Goods in accordance with the terms of this contract, SAR shall be entitled to terminate the contract with immediate effect. On termination, SAR may, in its discretion, exercise any of the following rights, either alone or in combination:

(a) dispose of the goods as it thinks fit; (b) retain any deposit or part-payment made by the buyer; (c) recover damages from the Buyer in respect of any losses it suffers as a result of the Buyer’s failure to take delivery, including, but not limited to, the profit it would have made had the Buyer performed its obligations, the costs of storage and disposal of the goods.

6.(i) Delivery dates given by SAR are a genuine forecast in the light of current conditions but are given without legal commitment and SAR accepts no liability in the event that it is unable to meet those dates.(ii) If events beyond SAR’s reasonable control prevent SAR from delivering any Goods by the appropriate delivery date, such date shall be postponed for a reasonable period. Beyond such period SAR may without liability cancel this contract as regards such Goods.

7. SAR will endeavour to supply the exact quantities of Goods ordered in the specified number of consignments.

8. SAR reserves the right to cancel balance of Orders. The Buyer will pay for the actual quantities of Goods delivered even though part of the consignment may still be outstanding.

9. Non-receipt of goods for delivery in the U.K. must be notified in writing to SAR within 5 working days of receiving an invoice for such a delivery.

10. (i) Errors and shortages must be notified in writing to SAR within 5 working days of receipt of goods. (ii) SAR shall, as its option, replace, repair or refund the purchase price of any Goods proved to its reasonable satisfaction to have been delivered short or to be defective provided in each case: (a) The Buyer as soon as reasonably practicable and in no event later than 5 working days of delivery informs SAR of the alleged short delivery or defect; and(b) The Buyer has paid for the Goods in full; and(c) No authorised repairs or alterations have been made to the defective Goods; and (d) The Goods have been maintained and used with reasonable care and in accordance with the directions or standard industry procedure and the Buyer provides full information and documentation to verify compliance with these conditions; and(e) If the Goods have been incorporated into other goods, the nature of those goods is stated; and (f ) The defect derives solely from the design, work or materials of SAR and was not caused wholly or partly as a result of delivery to the Buyers or any third party’s work, material or design. (iii) Consignments are packed to the highest standard. Damaged goods must be refused on delivery and the dispatch note marked ‘damaged in transit’. To ensure the dispatch of a replacement consignment the Buyer must advise SAR in writing of the damaged consignment within 5 working days of the damaged delivery.

11. (i) Ownership in the Goods remains with SAR until SAR has received cleared funds in full of the price of all the Goods supplied at any time by SAR to the Buyer as well as any other payment due under any other subsisting contract between SAR and the Buyer.(ii) The Buyer holds all goods owned by SAR as SAR’s fiduciary agent and bailee. (iii) All risk in the goods passes to the Buyer upon delivery. The Buyer must take all necessary protection of the goods including insurance until full payment is received.(iv) Until full payment as defined in clause 22 (i) has been received at SAR, the Buyer will hold the goods supplied on unpaid invoices in such a way that in the event of prior resale SAR shall be entitled to the proceeds of such a sale. (v) The Buyer shall if so requested by SAR store all goods not paid for in full so that they are clearly shown to be the property of SAR. The Buyer must maintain records of the location of the goods so they remain easily identifiable.(vi) Goods are supplied subject to the understanding that the credit Buyer authorises SAR to enter the Buyer’s premises in order to repossess goods for which full payment has not been received and all costs and expenses reasonably incurred by SAR shall be paid by the Buyer.

12. (i) SAR agrees to indemnify the Buyer:(a) against liability for personal injury or death directly attributable to the negligence of SAR; and (b) against physical damaged caused to the Buyer’s property directly arising from the negligence of SAR in connection with the supply of the Goods. (ii) SAR’s total indemnity to the Buyer under the indemnity contained above shall not exceed the price at which the Goods were sold to the Buyer for one or more related claims.(iii) Subject to the indemnity given above, SAR is not liable to the Buyer for any loss, expense or damage of any kind (direct, indirect, financial or consequential and whether arising from negligence or otherwise) arising from the supply, purported supply, failure to supply or from the Buyer’s use, possession or re-sale of the Goods. (iv) No officer or employee of SAR is liable to the Buyer in any circumstances for any loss, expense or damage of any kind (direct, indirect, inancial or consequential and whether arising from negligence or otherwise) arising from any act or omission of this during the performance of this employment or other duties.

13. All copyright, patent, trade secret and other proprietary and intellectual property rights in the Goods and all information which SAR may provide to the Buyer or its agent shall (as between the parties) at all times remain vested in SAR and the Buyer does not acquire any intellectual property rights or licence relating to the Goods and may not copy or imitate the Goods.

14. In addition to any other right of termination, SAR may terminate this contract if:(i) the Buyer defaults in the payments on its due date of any sum under this contract or commits any continuing or serious breach of this contract and fails to remedy that breach (if capable of remedy) within 10 working days of SAR’s notice to do so; and(ii) any of the following events occurs: (i) distress or execution is levied against any of the Buyer’s assets or a receiver is appointed with respect to any of the Buyer’s assets; or(ii) a petition is presented for the winding up of or for an administration order to be made in relation to the Buyer or a resolution passed for the Buyer’s winding up; or(iii) the Buyer suspends or threatens to suspend payment of its debts or is deemed unable to pay its debts for the purposes of Section 123 Insolvency Act 1986.(iv) at any time SAR has reasonable grounds to believe that any of the events mentioned in (i) and (ii) above is likely to happen within a period of three months thereafter.

15. On termination of this contract for any reason:(i)SAR shall be discharged from any further liability to perform under the contract;(ii) the Buyer shall pay SAR on demand for all work performed by SAR for the Buyer prior to termination; and (iii) SAR is granted an irrevocable licence to enter the Buyer’s premises to recover any goods or materials which are SAR’s property.

16. The contract shall be governed by English law and be subject to the jurisdiction of the English courts.

17. (i) Demonstration and loan equipment is supplied solely on the understanding that the prospective customer takes full responsibility for its use.(ii) Supply of demonstration and load equipment can only be made if the prospective customer confirms in writing their full acceptance of responsibility.

18. Please note; climbing, mountaineering, caving, rescue, work at height and similar or associated activities can be hazardous and carry dangers which may lead to serious injury or even death. Goods to be used in these disciplines must only be used by competent and informed persons who understand and accept the risks involved. An apprenticeship in appropriate techniques and safety measures is the responsibility of the user, who assumes responsibility for all risks and damages which may arise from the use of such equipment.

19. It is the responsibility of the Buyer to ensure that all technical data and instruction provided with the product by SAR is supplied to the end user.

20. (i) Payment shall be due by the Buyer in full and cleared funds to SAR 30 days from the date of invoice.(ii) Every time a cheque, standing order or banker’s order fails to clear the Buyer’s bank on presentation we will separately surcharge the Buyer’s account.(iii) SAR understands and reserves the right to exercise our statutory right to claim interest and compensation for debt recovery costs under the Late Payment of Commercial Debts (Interest) Act1998 (as amended) in the event that SAR is not paid according to agreed credit terms.(iv) If payment is received without instructions as to which invoice it should be matched against, it will be matched against the oldest invoice(s) on the account.(v) SAR expects customers to whom a credit note has been issued to claim the credit within 6 months. Where an account has been dormant for more than 6 months SAR will write off any credit notes and reserve the right to make an administrative charge in respect of any subsequent claim on them.(vi) Accounts that lie dormant for a minimum of 12 months will be closed. SAR reserves the right to make an administration charge for any subsequent reinstatement.

21. (i) In the event of any claim under warranty, guarantee or consumer protection law, SAR requires that Goods be returned to SAR for inspection.(ii) In order to minimise delay for the customer, SAR aims to inspect goods within 3 working days of receipt at SAR. (iii) Where goods are faulty and cannot, in SAR’s opinion, be repaired or replaced, a credit note will be issued to the original value of the faulty goods.(iv) SAR will not recognise as valid debit notes generated by the Buyer.

22. (i) SAR shall not be liable for any claims in respect of any Goods which have been misused, permitted or allowed to fall into a bad state of condition or repair and have not been maintained in accordance with the manufacturer’s instructions.

23. (i) Should any provision of this contract become illegal or void for any reason, the validity of the remaining provisions shall not be affected and the parties shall enter into negotiations in good faith to find a replacement for the provision which is of similar economic effect.

24. All notices, requests, claims, demands and other communications hereunder shall be in writing, Such notices shall be given: (i) By delivery in person(ii) By a nationally recognised next day courier service,(iii) By first class, registered or certified mail, postage prepaid,(iv) By facsimile or(v) By electronic mail to the address as either party may specify in writing. Notices so given shall be effective upon (i) receipt by the party to which notice is given, or (ii) on the fifth (5th) day following mailing, whichever occurs first.

25. If any provision or provisions of this Agreement shall be held to be invalid, illegal, unenforceable or in conflict with the law of any jurisdiction, the validity, legality and enforceability of the remaining provisions shall not in any way be affected or impaired thereby.

62 63

Specialist Access & Rescue Products Ltd.Sarena House,Vulcan Street,

Oldham,OL1 4LQ

United Kingdom

T: +44 (0)161 621 0309E: [email protected]: www.sar-products.com

Specialist Access & RescueProducts Ltd.

Date post:	14-Sep-2018
Category:	Documents
Upload:	truongtu
View:	215 times
Download:	1 times

Tactical Equipment 2016 - SAR Products · SAR Products Ltd was founded in 2003 by Dave & Dorene...

Documents