For a complete list of NYCO range of solutions, refer to our products catalogue for Aeronautics & Defence or visit www.nyco.fr
OTHER SPECIALTY FLUIDS
NYCOPROTEC® 8132
WEAPON OILS NYCOLUBE® 127 CLP [MIL-PRF-63460 F Type A] NYCOLUBE® 127 CLP Bio [MIL-PRF-63460 F Type B](DCSEA 501/A, BT-PS-661A)Synthetic CLP lubricating oil for weapon (Cleaning, Lubricating, Preservative), operating at temperatures ranging from -51°C to +71°C (as per MIL specification) and withstand temperatures from -54°C up to +150°C.
3 FUNCTIONS IN 1:
• Cleans all metal parts and removes the propellant powder residues;• Lubricates, thus reducing friction and wear;• Protects, against corrosion in all climatic conditions and during storage, thanks to its active water-repellent film.
ENGINE OILS
NYCOLUBE® 294 (TL 9150-0080)Indicated for the lubrication of heavy duty engine multigrade 0W30, hydraulic systems, transmissions, clutch and steering systems of military vehicles.
TURBONYCOIL® 640 (MIL-PRF-23699 G Class HTS, SAE AS5780 Class HPC)Synthetic aviation turbine oil used in the power plant of M1 Abrams tank.
NYCOLUBE® 14 Grade 16 / Grade 16 A(GOST 6360-83, MT-16p / GOST 25770-83 , GALOL M-4042 TD, M16 IKhP-3)Dedicated for the lubrication of T-72 and T-84 tank engines.
TRANSMISSION OILS
NYCOLUBE® 122(TU 38-101277-85, MT-8p / TU 38-1011280-89, TSZp-8)Automatic transmission fluid in planetary reduction gears; usable throughout the year in countries with a hot or temperate climate.
NYCOLUBE® 129 (MIL-PRF-2104 E, Grade SAE 30 API CF4/SG)Lubricating oil for severe duty engine diesel service.
GREASES
NYCO GREASE® GN 145 (MIL-PRF-10924 F)High performance grease for bearings, pins and sliding parts in military automotive equipment (trucks, tanks, artillery guns, etc.). Often referred as General Automotive and Artillery (GAA).
NYCO GREASE® GN 22(DCSEA 395/C, MIL-PRF 81322 G, DEF-STAN 91-52 iss.1)Multi-purpose and wheel bearings grease for the most severe conditions (high loads, high temperature and water contamination between -65°C and +177°C).
HYDRAULIC/RECOIL FLUIDSPetroleum and synthetic hydraulic fluids intended for use in recoil mechanism and hydraulic systems for rotating weapons or aiming devices, exhibiting anti-corrosion & anti-wear properties.
HYDRAUNYCOIL® FH 14 (TL 9150-0035 iss.7)Particularly designed for the Krauss-Maffei Leopard tank and as hydraulic fluid for bridge ledger where it offers the right balance of viscosity, low temperature viscosity, anti-wear and corrosion protection.
HYDRAUNYCOIL® FH 3(MIL-PRF-46170 E Type 1, TL 9150-0097 iss.4)For safer handling and operation at high temperature compared to the previous generation of petroleum-based fluids that exhibit low flash and fire points.
HYDRAUNYCOIL® FH 39Operational hydraulic fluid working under severe conditions of high pressure and high flow rate pumps. Particularly designed for the main hydraulic fluid system of the FNSS Pars 8×8 wheeled armored combat vehicle.
OTHER SPECIALTY FLUIDS
NYCOPROTEC® 8132 (MIL-PRF-16173 E Grade 2)Corrosion preventive compound for machinery, instruments, bearings.
For more information, contact your local representative or visit www.nyco.fr
