Impax Technology Group, LLC 431 Ohio Pike, Suite 312 Cincinnati, OH 45255 PHONE: 513-528-0800 TOLL FREE: 888-486-6342 FAX: 513-528-8103 www.kool-glide.com Seam Master Industries 5211 Southern Avenue South Gate, CA 90280 PHONE: 800-255-1401 FAX: 323-569-3040 www.seammaster.com Introducing a revolutionary non-heating carpet seaming system thatʼs simple to use, offering faster, smarter and more profitable results. By never getting hot and never touching the adhesive, The KoolGlide ® Carpet Seaming System is redefining the art of carpet installation. And, because the KoolGlide ® Carpet Seaming System is reversible minutes or years after installation, repairs and patches can be done from the top of the carpet in minutes. Sinch Technology uses a light-weight, handheld electronic tool that melts the proprietary adhesive from the top of the carpet using a pre-programmed heating cycle, controlled by a state-of-the-art microprocessor. Precise amounts of adhesive and tightly-controlled heating provide for a consistent low-profile seam, instantly delivering quality installation with the simple push of a button. • No smoke or odor • No heat distortions • No dripping glue • No burning – tool never gets hot • No damage to carpet • No time-consuming clean up • Superior seams • Works with all backings Technology powered by ® No Odor… No Mess… Superior Seams… No Kidding.
Transcript
outside inside
Impax Technology Group, LLC431 Ohio Pike, Suite 312Cincinnati, OH 45255
Seam Master Industries5211 Southern AvenueSouth Gate, CA 90280
PHONE: 800-255-1401FAX: 323-569-3040
www.seammaster.com
Introducing a revolutionary non-heating carpet seaming system thatʼs simple to use, offering faster, smarter and more profitable results. By never getting hot and never touching the adhesive, The KoolGlide® Carpet Seaming System is redefining the art of carpet installation.
And, because the KoolGlide® Carpet Seaming System is reversible minutes or years after installation, repairs and patches can be done from the top of the carpet in minutes.
Sinch Technology uses a light-weight, handheld electronic tool that melts the proprietary adhesive from the top of the carpet using a pre-programmed heating cycle, controlled by a state-of-the-art microprocessor. Precise amounts of adhesive and tightly-controlled heating provide for a consistent low-profile seam, instantly delivering quality installation with the simple push of a button.
• No smoke or odor
• No heat distortions
• No dripping glue
• No burning – tool never gets hot
• No damage to carpet
• No time-consuming clean up
• Superior seams
• Works with all backings
KoolGlide® ProKG200 PROThis tool has three heat settings. It can be adjusted for use over wood, concrete and other hard surfaces, as well as in cooler environments.
KoolGlide® Tape –Uncoated - KGT450 UC 41/2 inch tape with reinforcing scrim. Recommended for most seaming. Ideal for repairs, borders, custom rugs and decorative work because the tape can be over-lapped. This tape works on all common backings.
KoolGlide® Tape -Coated - KGT450 SC41/2 inch tape with reinforcing scrim and silicone backing. This tape eliminates sticking to the pad but cannot be overlapped. This tape works on all common backings.
KoolGlide® Tape – DoublestickKGT450 DS41/2 inch tape with reinforcing scrim and pressure-sensitive backing. This tape is for “direct glue” and “double glue” applications.
KoolGlide® Tape - UtilityKGT350 UT31/2 inch tape with pressure- sensitive backing but no reinforcing scrim. This tape is used for a variety of bonding applications such as backsplash, cove corners, stair treads and wood or laminate flooring. KoolSticks - Seam SealerKS100 SS Glue sticks designed to re-activate at the same temperature as the KoolGlide® tape. Perfect for seam sealing with the KoolGlide® System.
Cordless Glue GunKS200 GG Cordless glue gun and electric charging stand. Tape GuideKGA100 TGAid for aligning tape under seam.
Feedback
How It WorksProducts
Carpet
Tool
Tape
Pad
Technology powered by
®
“Because the KoolGlide is completely reversible in an instant, we’ve saved complete jobs and virtually eliminated the potential of costly error.”
– Garlin FarrisGM – Fleetwood Homes
“With the old hot irons, we had to worry about dripping glue or even burning the carpet and backing during installation. We don’t have to worry about any of that with the KoolGlide system. You don’t smell anything, and there’s no risk of fire.”
– Melvin Santiago Owner – Floor Tech of Central Florida, Inc.
“I haven’t gotten a single complaint about smell since I started using the new system. The quality is 100% better, and the usability of the tool is amazing.”
– Oscar Carsey Owner – Oscar Carsey Carpet
No Odor…
No Mess…
Superior Seams…
No Kidding.
outside inside
Impax Technology Group, LLC431 Ohio Pike, Suite 312Cincinnati, OH 45255
Seam Master Industries5211 Southern AvenueSouth Gate, CA 90280
PHONE: 800-255-1401FAX: 323-569-3040
www.seammaster.com
Introducing a revolutionary non-heating carpet seaming system thatʼs simple to use, offering faster, smarter and more profitable results. By never getting hot and never touching the adhesive, The KoolGlide® Carpet Seaming System is redefining the art of carpet installation.
And, because the KoolGlide® Carpet Seaming System is reversible minutes or years after installation, repairs and patches can be done from the top of the carpet in minutes.
Sinch Technology uses a light-weight, handheld electronic tool that melts the proprietary adhesive from the top of the carpet using a pre-programmed heating cycle, controlled by a state-of-the-art microprocessor. Precise amounts of adhesive and tightly-controlled heating provide for a consistent low-profile seam, instantly delivering quality installation with the simple push of a button.
• No smoke or odor
• No heat distortions
• No dripping glue
• No burning – tool never gets hot
• No damage to carpet
• No time-consuming clean up
• Superior seams
• Works with all backings
KoolGlide® ProKG200 PROThis tool has three heat settings. It can be adjusted for use over wood, concrete and other hard surfaces, as well as in cooler environments.
KoolGlide® Tape –Uncoated - KGT450 UC 41/2 inch tape with reinforcing scrim. Recommended for most seaming. Ideal for repairs, borders, custom rugs and decorative work because the tape can be over-lapped. This tape works on all common backings.
KoolGlide® Tape -Coated - KGT450 SC41/2 inch tape with reinforcing scrim and silicone backing. This tape eliminates sticking to the pad but cannot be overlapped. This tape works on all common backings.
KoolGlide® Tape – DoublestickKGT450 DS41/2 inch tape with reinforcing scrim and pressure-sensitive backing. This tape is for “direct glue” and “double glue” applications.
KoolGlide® Tape - UtilityKGT350 UT31/2 inch tape with pressure- sensitive backing but no reinforcing scrim. This tape is used for a variety of bonding applications such as backsplash, cove corners, stair treads and wood or laminate flooring. KoolSticks - Seam SealerKS100 SS Glue sticks designed to re-activate at the same temperature as the KoolGlide® tape. Perfect for seam sealing with the KoolGlide® System.
Cordless Glue GunKS200 GG Cordless glue gun and electric charging stand. Tape GuideKGA100 TGAid for aligning tape under seam.
Feedback
How It WorksProducts
Carpet
Tool
Tape
Pad
Technology powered by
®
“Because the KoolGlide is completely reversible in an instant, we’ve saved complete jobs and virtually eliminated the potential of costly error.”
– Garlin FarrisGM – Fleetwood Homes
“With the old hot irons, we had to worry about dripping glue or even burning the carpet and backing during installation. We don’t have to worry about any of that with the KoolGlide system. You don’t smell anything, and there’s no risk of fire.”
– Melvin Santiago Owner – Floor Tech of Central Florida, Inc.
“I haven’t gotten a single complaint about smell since I started using the new system. The quality is 100% better, and the usability of the tool is amazing.”
– Oscar Carsey Owner – Oscar Carsey Carpet
No Odor…
No Mess…
Superior Seams…
No Kidding.
GREEN!
Now KOOLGLIDE Technology for Hard SurfacesIntroducing – the Instafast SystemNow, with the Instafast System from KOOLGLIDE, unsightly face nail-ing can be eliminated and tedious board replacement is made easy. Just put the board in place over the KOOLGLIDE Utility Tape. Then use the KOOLGLIDE PRO-W to activate the tape right through the board. This system uses patented Sinch® Technology to remotely activate a specially designed tape.
It’s safe, fast, easy and strong. If you make a mistake just reverse the bond and redo. And, it works on carpet too.
KOOLGLIDE ADVANTAGESEliminates face nailing. KOOLGLIDE installa-tion of the starter and finish rows gives you a smooth, attractive surface. No nail holes to putty. Also, it’s much easier than face nailing on concrete.
Easy board replacement. Removing and gluing a perfectly fitting board is one of the hardest tasks in board replacement. With KOOLGLIDE, once the board fits, just activate.
Easy to use. The KOOLGLIDE System is mi-croprocessor controlled so all the operator needs to do is place the tool over the tape and push the button.
Easy repairs. With hardwood installation,
reactivating tape is a lot easier than pulling out nails. Also works on tile and laminate.
Safe. The Sinch® technology operating is low frequency and very save to use.
Clean. With KOOLGLIDE the tool and the tape never touch. No messy glue.
Carpet Seaming. The PRO-W also doubles as a carpet seaming tool.
Utility TapeItem # KGT 350UT• For hardwood, tile and composite• 3 ½’ wide• 66’ roll• Installation and board replacement
Starter and finish rows without face nailing – For many hard wood fastening jobs, face nailing is the only answer. But face nailing is visible from the surface and requires matching and filling. With the KOOLGLIDE, simply put the boards in place and hit the power button.
Board replacement – The trouble with conventional methods of board replacement is that once you have the board in place, you have to carefully remove it. This is difficult and sometimes damages the board. With KOOLGLIDE you put the tape behind the board. Then when the board fits perfectly, activate the tool.
Decorative tile – The KOOLGLIDE with utility tape is great for decorative tile applications such as base and back splash. Remember, the adhesive on the utility tape is non-structural adhesive and should be used only where the tile is supported.
Lab tests show that the bond made with the Instafast system from KOOLGLIDE is more than three times stronger than with a finish nail.
