TECHNICAL BULLETIN July 1, 2016
TB 1601
www.maxionwheelsandrims.com For complete information or questions, please contact Maxion Wheels Sales or Engineering at 1-800-521-0515 (extension 75438 or 75652).
Evaluation of Wheels for Excessive Corrosion under Five-Year Limited Warranty
This Technical Bulletin (“TB”) refers to and supplements Maxion Wheels’ Five-Year Limited Warranty F-152F (07/01/16) applicable to the original MaxCoatTM Extra powder-coat finish on hub-piloted single and wide-base tubeless disc wheels. The purpose of this TB is to provide pictorial guidance for determining the presence of excessive corrosion covered by the limited warranty. “Excessive corrosion” occurring during the warranty period is defined as a significant accumulation of rust corrosion which detracts from the overall wheel appearance thus requiring refinishing. The presence or absence of excessive corrosion will be determined by Maxion Wheels. The following photographs display examples of “excessive corrosion” conditions warranted by Maxion Wheels:
TECHNICAL BULLETIN July 1, 2016
TB 1601
www.maxionwheelsandrims.com For complete information or questions, please contact Maxion Wheels Sales or Engineering at 1-800-521-0515 (extension 75438 or 75652).
The following photographs display examples which are not considered as “excessive corrosion” conditions and are not warranted by Maxion Wheels:
Flan
ge w
ear d
ue to
ove
rload
/ tir
e Hub bleed out / m
inor corrosion W
ear o
f the
dis
c m
ount
ing
surfa
ce
Contact of hose w
ith wheel
Frec
klin
g an
d hu
b / n
ut b
leed
out
Dam
age from tire iron or curbing