TD-14 TD-15 TD-20 - Dressta€¦ · TD-14 TD-15 TD-20 MID-SIZE CRAWLER DOZERS . When your business...

Road & Highway

Construction

Landfill

Forestry

Foundry

Quarry

STANDARD / LT / WT / LGP

TD-14 TD-15 TD-20 MID-SIZE CRAWLER DOZERS

When your business relies on equipment that is durable, productive and backed up by a global network – you can rely on Dressta. Over its 70+ year history, Dressta has developed a reputation for productive equipment tailored to the needs of its hardworking customers.

Dressta’s mid-size dozers have the muscle and finesse to get the job done quickly and efficiently.

Operator comfort, ease of serviceability and productivity are at the heart of their design, while outstanding power, agility and precision deliver the right performance at any job site.

Dressta mid-size dozers come loaded with features that deliver total lifetime value:

1. Powerful Cummins engines that deliver impressive power for efficient dozing and ripping.

2. Unique 2-Speed steering drive for continuous transfer of 100% engine power to both tracks for better load retention in turns.

3. Low drive track system allowing stability on slopes and excellent manoeuvrability in full power gradual turns.

4. Trimble options to improve productivity, maximize performance and enable pinpoint accuracy.

5. Travel speed preselection and automatic down-shifting mode for greater operator efficiency.

6. Exceptional all-round visibility, with clear line of sight to blade corners.

7. Ergonomically designed cab with deluxe seat, large LCD display, A/C, sound suppression and responsive controls for comfort, command and ease of operation.

8. Rugged undercarriage design for maximum durability and smooth, stable operation.

9. Highly efficient cooling system suitable for all climate conditions.

10. Able to operate in ambient temperatures from -40°C to +60°C.

11. Lifetime lubricated rollers and heavy duty chains and idlers for greatly extended track life, lower operating costs and maximum productivity.

12. High drawbar pull thanks to reliable mechanical transmission and steering drive clutches, providing 6F / 6R travel speeds.

Engineered for productivity and precision

13. Modular power train design and easily accessible diagnostic check ports, filters and sight gauges for excellent serviceability.

14. FOPS and 2-post ROPS certified cab, guaranteeing a safer environment for the operator.

2

TD-14OPERATING WEIGHT



HORSE POWER (NET)

HORSE POWER (NET)

HORSE POWER (NET)

16,100 kg (35,494 lb) –

16,570 kg (36,530 lb)

20,660 kg (45,547 lb) –

20,760 kg (45,768 lb)

24,200 kg (53,352 lb) –

24,250 kg (53,462 lb)

120 kW (160 Hp)

142 kW (190 Hp) –

154 kW (206 Hp)

179 kW (240 Hp) –

185 kW (248 Hp)

3

Designed for command and control

Controllability equals productivity.

Dressta mid-size dozers deliver precise and predictable control with outstanding pushing power.

WORK YOUR WAY - BETTER BLADE CONTROL & FASTER OPERATING SPEEDS

Dressta dozers put finesse at your fingertips, so that you get faster results, reach final grade in fewer passes, and move more material in less time. This adds up to greater efficiency, which translates to lower costs.

A responsive electro-hydraulic, left hand joystick controls travel direction and steering while the right hand joystick gives control of the blade.

Ergonomic joysticks enable precision, control and predictable response whether you’re operating the tracks, the blade or the ripper.

The steering system maintains full power to both tracks at all times for excellent traction and responsive turning – even on slopes or loose ground.

COMMAND AND CONTROL

Cleverly designed switches and displays help you easily control the dozer. All instruments and controls are conveniently located.

The headlights and adjustable work lights are controlled by a single light switch on the instrument panel for optimal visibility and safety in low light environments.

2-SPEED STEERING SYSTEM

Fewer passes means reduced cycle times and higher productivity.

Our unique 2-Speed Steering Drive delivers full power to both tracks at all times, resulting in vastly improved traction to push full loads effortlessly through turns, quickly and smoothly.

You also get better load retention, improved speed control in soft conditions, plus overall manoeuvrability and cycle times are improved.

TRAVEL SPEEDS

Variable travel and working speeds mean easy, precise control with full power turning for better load retention, less sprocket and bushing wear, better ripping performance and modulated directional control in all-terrain conditions, slope work and corner dozing.

The result is higher productivity and lower undercarriage costs thanks to increased traction and less track slippage.

The TD14, TD15 & TD20 set the standards for others to follow and are a result of Dressta’s experience in designing highly efficient and productive crawler dozers.

Key design features range from optimization of weight distribution to modular construction, a one-piece main frame, and a 3-point track mounting system.

The machine weight is perfectly matched to its power for unbeatable traction and unrivalled drawbar pull, so you can rip and move more material per hour.

4

PRODUCTIVE AND DEPENDABLE ENGINE

Dressta’s mid-size dozers are powered by a range of turbocharged Cummins engines which feature a high-pressure common-rail fuel system to ensure efficient performance while supplying the power you need for maximum productivity at the job site. Thanks to the proven common-rail fuel system, this technology delivers a precise quantity of fuel at high pressure and increases fuel economy and performance, decreasing exhaust and noise emissions with consistent performance at every rpm.

TD-14M EXTRA / TD-14R / TD-15R EXTRA

Engine: Cummins QSB 6.7Emission Standards: EPA Tier 3 – Tier 4 Interim - Tier 4 Final / EU Stage IIIA - IIIB - IV

Developed to meet U.S. Environmental Protection Agency (EPA) and EU emissions regulations, the Cummins QSB 6.7 engine features an advanced technology solution for total integration of the engine and the exhaust after-treatment system. Fuel economy is optimized above 5 percent compared to Tier 4 Interim engines, while achieving near-zero emissions at the same time. Thanks to the incorporated Cooled Exhaust Gas Recirculation (EGR) system, this next-generation engine minimizes Diesel Exhaust Fluid (DEF) consumption levels as well.

The Tier 3 and Stage IIIA Cummins QSB 6.7 features in-cylinder technology and proven electronic controls to handle the toughest job requirements. It offers improved cold-start capability and major enhancements that make Dressta products work harder, smarter, quieter and longer.

TD-15M EXTRA / TD-20M EXTRA

Engine: Cummins QSC 8.3Emission Standards: EPA Tier 3 / EU Stage IIIA

Cummins proven performance, dependability and durability is maintained while operating cleanly and efficiently with the QSC 8.3. By using in-cylinder technology, this engine meets EPA Tier 3 and EU Stage IIIA emissions standards. Advanced electronics provide enhanced engine performance for Dressta machines with higher torque and better throttle response at every rpm as well as increased fuel economy, precision diagnostics and engine protection. The QSC also features improved cold starting plus up to 50% quieter operation for better operator comfort.

TD-20R EXTRA

Engine: Cummins QSL 9Emission Standards: EPA Tier 4F / EU Stage IV

The QSL9 275 horsepower engine meets EPA Tier 4 / EU Stage IV Final near-zero emissions standards with a next-generation compact catalyst and selective catalytic reduction (CCC-SCR) after treatment system. The engine makes no performance compromises in order to meet the standard, retaining its proven fast engine response and reliability for the Dressta dozers. The compact after treatment system provides a fully passive, flow-through operation and enables the engine to further improve fuel efficiency.

5

Heavy duty design

Dressta dozers are built with a one-piece mainframe for exceptional strength so you can get on with the toughest of jobs with confidence.

The front section of the mainframe supports the radiator, engine, torque converter and transmission, while the rear section supports steering drive and the final drives. Working loads from the blade and rear mounted attachments are evenly distributed through the frame and undercarriage.

The robust design includes a heavy-duty undercarriage, available in various options, to enhance performance through stability in different types of conditions and terrains.

MODULAR CONSTRUCTION

Maximum uptime is critical to business success. Dressta’s modular design arranges components in a way that makes removal and replacement during servicing quick and easy, to get you back to work fast for minimum downtime and maximum profitability.

• All Dressta products have track chains with master links which makes servicing the tracks fast and without the need for special tools or hydraulic presses.

• Dressta dozers incorporate equalizer bars which do not require pins at the ends. Thanks to this feature, the equalizer bars are maintenance free for the life of the product.

MANAGING WEAR

Durable components that continue to perform through everyday wear and tear improve the lifetime value of your machine. Dressta’s Lubricated Track System (LTS) is designed for:

• Reduced wear of sprocket and external bushing;

• Eliminate track link counter bore wear and reduce chain warp or twisting;

• Increased track roller and idler life;

• Quieter track chain operation.

TRACK SHOES

A wide range of track shoe options helps perfectly match our dozers to all types of ground conditions.

Working loads from the blade and rear mounted attachments are evenly distributed through the frame and undercarriage.

6

TRACKS SHOES

Track gauge Track length on ground Shoes, each side Shoe width

TD-14 M Extra (Standard) 1,880 mm (74 in) 2,600 mm (102 in) 40 560 mm (22 in)

TD-14 M Extra (LT) 1,880 mm (74 in) 3,170 mm (125 in) 46 560 mm (22 in)

TD-14 M Extra (LGP) 2,136 mm (84 in) 3,170 mm (125 in) 46 915 mm (36 in)

TD-14 R (Standard) 1,930 mm (76 in) 2,600 mm (102 in) 40 560 mm (22 in)

TD-14 R (LT) 1,930 mm (76 in) 3,170 mm (125 in) 46 560 mm (22 in)

TD-14 R (LGP) 2,240 mm (88 in) 3,170 mm (125 in) 46 915 mm (36 in)




TD-15 R Extra (Standard) 1,930 mm (76 in) 2,640 mm (104 in) 39 508 mm (20 in)

TD-15 R Extra (LT) 1,930 mm (76 in) 3,050 mm (120 in) 43 508 mm (20 in)

TD-15 R Extra (LGP) 2,160 mm (85 in) 3,050 mm (120 in) 43 940 mm (37 in)




TD-20 R Extra (Standard) 1,980 mm (78 in) 2,860 mm (113 in) 40 560 mm (22 in)

TD-20 R Extra (LT) 1,980 mm (78 in) 3,080 mm (121 in) 42 560 mm (22 in)

TD-20 R Extra (LGP) 2,180 mm (86 in) 3,080 mm (121 in) 42 864 mm (34 in)

7

Comfort zone When you’re on the job site from dawn to dark, you want a cab that is comfortable all day long.

Dressta operators will enjoy exceptional in-cab comfort from the performance of the air conditioning system to the location of the controls for optimal operator comfort.

The FOPS and 2-post ROPS certified cab provides more space and is equipped with:

• Large tinted side and rear sliding windows for cross ventilation and an enhanced view of both the blade and ripper equipment.

• Air recirculation system.

• Air conditioner / heater / pressurizer.

• Noise reduction trim.

• Deluxe air suspension seat including 6-way adjustment and arm rests.

• Ergonomically designed joystick controls for direction, blade and ripper operation.

• Optional ROPS Canopy.

The comfortable suspension seat is adjustable to the operator’s weight and sitting position and is equipped with full arm rests and seat belt. It swivels to the right for better ripper viewing and reduced operator fatigue during long ripping runs.

High resolution 7 inch

LCD

NOISE AND VIBRATION MANAGEMENT

Isolated cab mounts reduce vibration for enhanced comfort and noise reduction, while the low drive undercarriage system ensures minimal vibration and noise from the final drives.

AIR CONDITIONING

The air conditioning system creates the right environment in any weather, all year round. The heater, the A/C evaporator unit and fan are mounted under the operator’s seat for consistent cab temperature throughout the day, while fresh air filters are mounted below the cab rear windows and the condenser unit is mounted at the rear of the cab.

EASY MONITORING

A high resolution 7” LCD display screen provides real-time system values for temperatures, pressures and forward/reverse direction shift and ground-speed ranges.

• Multiple language options

• Large anti-glare full color monitor

• Generous memory storage

• Dual (metric/imperial) units

display screen

8

The cab provides a clear view to the blade and ripper working areas, as well as the entire job site.

RESPONSIVE AND PREDICTABLE STEERING CONTROL

TD14, TD15 and TD20 feature a steering drive that is controlled with the left-hand joystick. The joystick controls the transmission in high or low range as well as left or right gradual speed turns. Brakes for parking and downhill control are activated by a foot pedal, and are spring applied and hydraulically released.

MAXIMUM VISIBILITY

The cab provides clear view to the blade and ripper working areas and the entire job site, with a direct line of sight to the cutting edge, making it easy to follow the flow of material under the blade.

9

Attachments enhance productivity and versatility A great dozer can only deliver great results with the right attachments. Dressta’s robust blades and rippers are designed to power through even the toughest of material and are suited to a wide range of applications.

BLADES

The Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is ideal for applications like road and highway construction.

The 6-way blade control system is designed for performance and final grade control. With its motion capabilities, these blades are adept at finish grade work in construction and landscaping applications.

Dressta also offers large blades for increased capacity and incorporating full width cutting edges for prolonged durability.

Cutting edge angles and blade mouldboard geometry are designed to provide a balance between fine-light dozing and aggressive heavy material movement. This enables the dozers to perform at maximum productivity over a broader variety of applications.

All blades can be equipped with hydraulic blade tilt and angle as well as manual blade pitch adjustment to increase the versatility of the dozer.

Blades (Standard)TD-14 M Extra

(Standard)TD-14 R

(Standard)TD-15 M Extra

(Standard)TD-15 R Extra



(Standard)

Types 6-way; Semi-U 6-way; Semi-U Semi-U; Angle Semi-U; AngleSemi-U; Full-U; Angle; Straight

Semi-U; Full-U; Angle; Straight

SAE capacity3.2 m³ (4.2 yd³) – 4.28 m³ (5.6 yd³)

3.4 m³ (4.5 yd³) – 4.28 m³ (5.6 yd³)

3.80 m³ (5.0 yd³) – 7.04 m³ (9.2 yd³)

3.80 m³ (5.0 yd³) – 7.04 m³ (9.2 yd³)

3.88 m³ (5.1 yd³) – 8.45 m³ (11.1 yd³)

3.88 m³ (5.1 yd³) – 8.45 m³ (11.1 yd³)

10

Ripper (Standard)TD-14 M Extra

(Standard)TD-14 R





(Standard)

Types Parallelogram ripperParallelogram ripper with hydraulic pitch

adjustment

Triple shank Single shank; triple shank

RIPPERS

The single shank ripper option offers a standard shank with exceptional penetration, allowing full use of the remarkable drawbar pull of the machine.

An adjustable parallelogram multi-shank ripper also offers outstanding penetration in various ground conditions and can be used with up to three shanks.

Both the single and multi-shank rippers are equipped with best-in-class (largest diameter) pitching cylinders to change the angle of the attack of the ripper shank according to ripping conditions.

11

Servicing made easy

Controlling servicing and maintenance costs is critical to achieving maximum lifetime value from your equipment.

Keeping your Dressta dozer in top running condition requires less effort, thanks to ground-level access to the engine and all daily maintenance checkpoints.

The modular power train layout means every major component can be serviced or replaced in the field in just a few hours.

The cooling system features aluminium bar plates for improved heat transfer and reduced resistance to air flow.

The modular design makes it easier to access for maintenance and regular cleanouts while an optional reversible fan provides maximum radiator cleaning performance while you work.

Dressta provides clear, easy to follow maintenance instructions to guide you through typical maintenance and service routines and can offer a variety of training programs to help you get the best from your machine.12

EASY ACCESS

All service and maintenance points are clearly marked and easily accessible, with diagnostic points conveniently grouped together. Built-in reminders in the on-board monitoring system help to ensure that servicing is taken care of when needed.

AUTOMATIC GREASING

An optional automatic greasing system makes servicing even easier, helping to lower maintenance costs and improve machine productivity. This automatic system improves bearing life and reduces the need for repairs by delivering frequent and exact amounts of grease to each bearing.

13

Work your wayDifferent jobs have different requirements. Dressta makes it easy to get the best result in any operation by designing versatile equipment, and working directly with customers to meet their special requirements.

14

TRIMBLE OPTIONS

All of Dressta’s models come with a ‘plug and play’ option for installation of a Trimble Grade Control System. Trimble equipped machines make it easier to finish jobs with less re-work, less staking, less checking, lower costs and improved material yields.

DRESSTA DOZERS ARE IDEALLY SUITED TO A FURTHER RANGE OF APPLICATIONS, HELPING OUR CUSTOMERS ACHIEVE MORE IN THE JOBS THEY DO.

ROAD & HIGHWAYS

Building roads just got easier. Dressta’s mid-size dozers are packed with features for road and highway applications, including our unique two-speed steering drive, pre-selection mode and auto-down shifting to help you to push through any task with ease and move more material at less cost.

Dressta also offers Trimble grade control, so you can stay in full command and make the grade with precise control and better finish.

CONSTRUCTION

Construction is a deadline-driven environment where reliable, productive equipment is essential. Dressta’s powerful mid-size dozers have the muscle to take on any construction challenge, from ground breaking work to final grade.

LANDFILL

Landfill operations are tough on equipment and operators. Dressta’s mid-size dozers are built to excel in landfills, where they deliver excellent waste compaction and can be fitted with large blades with trash racks and single or multi-shank rippers.

Talk to Dressta about Special Feature Requests for specific customization needs. If different applications require unique attachments, components or design features, Dressta will work with you to maximize the operational efficiency of your machines.

FORESTRY

Dressta’s dozers have a range of features suited to challenging forest environments. Talk to Dressta about optimal performance specifications and the range of Special Feature Requests including cyclonic air filtration, fire suppression, auxiliary hydraulics and more.

FOUNDRY

One of the most testing applications for a dozer is the handling of hot materials such as iron slag. Dressta dozers are built to survive and thrive in the most challenging environments and keeping operators safe, comfortable and productive.

QUARRY

Dressta dozers are ideally suited for material handling and extraction of valuable minerals and resources from quarries. The machines efficiently perform a range of quarry functions.

ARCTIC

Extreme conditions are no match for Dressta’s dozers. Refined for supreme performance in arctic conditions, Dressta machines are optimised to perform in temperatures as low as -40°C.

With Trimble’s VisionLink, you can easily see where your equipment is, what it is doing and how productive it is, utilizing user-friendly management tools combined with GPS-based positioning and wireless hardware.

15

Support when and where you need it

Dressta knows that its equipment is put to the test each and every day, and its machines are engineered to stand up to the challenges and demands of the toughest jobs.

WARRANTY

When you purchase a Dressta dozer, your investment is backed by one of the most comprehensive warranties in the industry. In addition to the standard 12 month warranty, Dressta offers extended warranty protection programs for additional peace of mind.

EASY PARTS SUPPLY

Genuine Dressta parts are engineered to fit right the first time and to provide the highest levels of performance and reliability while meeting strict quality controls. The global parts network, with seven regional distribution centers and advanced logistics systems, means you can be assured of rapid parts supply of whatever you need, wherever you are.

GET THE MOST OUT OF YOUR EQUIPMENT

Dressta’s stringent quality assurance ensures all products meet the exact needs of customers. Technical support teams offer fast access to factory expertise and information systems while ongoing aftersales support is available via dealerships with factory trained engineers who are available as and when you require.

16

Our products are supplied worldwide through a well-established network of independent distributors who are as passionate about the industry as you are.

17

TD-14M Extra TD-14R TD-15M Extra TD-15R Extra TD-20M Extra TD-20R Extra

Make and model Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSC 8.3 Cummins QSB6.7 Cummins QSC 8.3 Cummins QSL 9

Emissions standardEPA Tier 3/EU Stage

IIIAEPA Tier 4 Interim/

EU Stage IIIBEPA Tier 3/EU Stage

IIIAEPA Tier 4f/EU

Stage IVEPA Tier 3/EU Stage

IIIAEPA Tier 4f/EU

Stage IV

Displacement 6.7 L (408 in3) 6.7 L (408 in3) 8.3 L (505 in3) 6.7 L (409 in3) 8.3 L (505 in³) 8.9 L (543 in³)

Bore and stroke107 x 124 mm (4.21 x 4.88 in)

107 x 124 mm (4.21 x 4.88 in)

114 x 135 mm (4.49 x 5.32 in)

107 x 124 mm (4.21 x 4.88 in)

114 x 135 mm (4.49 x 5.32 in)

114 x 144.5 mm (4.49 x 5.69 in)

Gross horsepower, SAE J1995 129 kW (173 Hp) 129 kW (173 Hp) 153 kW (205 Hp) 168 kW (225 Hp) 194 kW (260 Hp) 205 kW (275 Hp)

Net horsepower, SAE J1349/ISO 9249

120 kW (160 Hp) 119 kW (160 Hp) 142 kW (190 Hp) 154 kW (206 Hp) 179 kW (240 Hp) 185 kW (248 Hp)

Rated RPM 1,800 2,100 1,950 2,000 2,200 2,200

Max. torque893 Nm (659 lb-ft)

@ 1,350 rpm801 Nm (591 lb-ft)

@ 1,350 rpm1,010 Nm (745 lb-ft)

@ 1,450 rpm949 Nm (700 lb-ft)

@ 1,500 rpm1,180 Nm (870

lb-ft)1,213 Nm (895 lb-ft)

@ 1,500 rpm

Air cleaner

2-stage, dry type, with dash mounted electronic service

indicator


indicator


indicator

Cummins Filtration Direct FlowTM,

dry type, exhaust aspiration, with dash-mounted

electronic service indicator


indicator

Cummins Filtration Direct FlowTM, dry type, with dash-

mounted electronic service indicator

Cold-starting aid Grid heater Ether Grid heater Ether Grid heater Ether

Slope operation, max. angle 45˚

TD-14M Extra/TD-14R TD-15M Extra/TD-15R Extra TD-20M Extra TD-20R Extra

Voltage 24 V

Number of batteries 2

Battery capacity 960 CCA 815 CCA 815 CCA

Alternator rating 70 A 50 A 50 A 80 A

Lights 8 total; cab mounted (2F & 2R), 2F lift cylinders and 2R fuel tank mounted

TD-14M Extra/TD-14R TD-15M Extra/TD-15R Extra TD-20M Extra/TD-20R Extra

Service Spring applied hydraulically released multi-disc wet brakes. Foot pedal controlled.

Parking The steering brakes also act as service and parking brakes. Service brakes are locked automatically when the transmission safety

lever is actuated or when the engine is cut off.

ENGINE

TD-14M Extra TD-14R TD-15M Extra TD-15R Extra TD-20M Extra TD-20R Extra

Type

Suction-type fan, belt driven with

perforated engine side sheets and

heavy duty louvered front grill

Suction-type variable-speed fan, hydraulically driven

with perforated engine side sheets

and heavy duty louvered front grill













Engine coolant rating –37˚C (–34˚F)

COOLING

ELECTRICAL

BRAKES

18


Type Open-center hydraulic system with fixed-displacement tandem-gear pumpsOpen-center hydraulic system with fixed-displacement multiple-pumps gear type

Pump displacement 135 L/min (35.7 gpm) 173 L/min (46 gpm) / 204 L/min (53.9 gpm) 239.7 L/min (63.3 gpm)

System relief pressure 17.5 MPa (2,540 psi) 17.2 MPa (2,500 psi)blade lift & ripper 17.3 MPa (2,500 psi);

blade tilt 18.6 MPa (2,670 psi)

Control single joystick lever

HYDRAULICS


ROPS (ISO 3471 - 2008) and FOPS (ISO 3449 - 2005)

OPERATOR STATION

TD-14M Extra/TD-14R TD-15M Extra TD-15R Extra TD-20M Extra TD-20R Extra

Refill Capacities

Fuel tank 380 L (100 US gal) 380 L (100.4 US gal) 330 L (87.2 US gal) 490 L (130 US gal) 420 L (115 US gal)

Cooling system 34 L (9 US gal) 50 L (13.2 US gal) 27 L (7.1 US gal) 50 L (13.5 US gal) 37 L (9.8 US gal)

Engine oil 18.5 L (4.9 US gal) 23 L (6.1 US gal) 18.5 L (4.9 US gal) 22.5 L (6 US gal)

Transmission system 125 L (33 US gal) 153 L (40.4 US gal) 173 L (45.8 US gal)

Final drive, each sideSTD & LT 28 L (7.4 US gal)

LGP 46 L (12 US gal)40 L (10.6 US gal) 38 L (10 US gal)

Hydraulic reservoir 59 L (15.6 US gal) 60 L (16 US gal) 115 L (30.4 US gal)

AdBlue (DEF) - - 20 L (5.3 US gal) - 37.5 L (10 US gal)

SERVICEABILITY

19


Transmission Single stage torque converter drives to transmission through a double universal joint. Modular, countershaft type power shift

transmission, electro-hydraulic control. Preset travel speed and auto-downshift.

Torque converter stall ratio 2.1:1 2.6:1 2.3:1 2.3:1

Steering

Exclusive 2-speed geared steering module provides gradual turns while maintaining full power to both tracks plus conventional clutch-brake performance for tight or pivot turns. Coupled to 3-speed transmission, the 2-speed steering provides 6 speeds forward and 6 reverse. The left hand joystick controls transmission and steering drive for up and down shifting, steering, Hi/Lo selection and LH/RH

gradual turn.

Final drivesDouble-reduction final drives mounted

independently of track frames and dozer push arms for isolation from shock loads

Double-reduction final drives mounted independently of track frames and dozer push arms for isolation from shock loads

Double-reduction planetary type final drives mounted independently of track frames and dozer push arms for isolation from shock

loads

Total ratio 10.32 to 1 12.1 to 1 17.56 to 1

POWERTRAIN

Travel speeds TD-14M Extra/TD-14R

Gear Range Forward Reverse

1st Low 2.9 km/h (1.8 mph) 3.6 km/h (2.2 mph)

High 4.0 km/h (2.5 mph) 4.8 km/h (3.0 mph)

2nd Low 5.0 km/h (3.1 mph) 6.0 km/h (3.7 mph)


3rd Low 8.2 km/h (5.1 mph) 9.8 km/h (6.1 mph)


Maximum drawbar pull 355 kN (79,807 lb)

Travel speeds TD-15M Extra TD-15R Extra

Gear Range Forward Reverse Forward Reverse

1st Low 2.7 km/h (1.7 mph) 3.2 km/h (2.0 mph) 2.8 km/h (1.7 mph) 3.3 km/h (2.1 mph)

High 3.6 km/h (2.2 mph) 4.3 km/h (2.7 mph) 3.8 km/h (2.4 mph) 4.5 km/h (2.8 mph)

2nd Low 4.9 km/h (3.0 mph) 5.7 km/h (3.5 mph) 5.0 km/h (3.1 mph) 6.0 km/h (3.7 mph)


3rd Low 7.7 km/h (4.8 mph) 9.0 km/h (5.6 mph) 8.0 km/h (5.0 mph) 9.3 km/h (5.8 mph)


Maximum drawbar pull 535.3 kN (118,688 lb)

Travel speeds TD-20M Extra TD-20R Extra

Gear Range Forward Reverse Forward Reverse

1st Low 2.9 km/h (1.8 mph) 3.6 km/h (2.3 mph) 2.9 km/h (1.8 mph) 3.4 km/h (2.1 mph)


2nd Low 5.2 km/h (3.2 mph) 6.1 km/h (3.8 mph) 5.2 km/h (3.2 mph) 6.1 km/h (3.8 mph)


3rd Low 9.0 km/h (5.6 mph) 9.7 km/h (6.0 mph) 8.2 km/h (5.1 mph) 9.6 km/h (6.0 mph)


Maximum drawbar pull 620 kN (139,382 lb) 640 kN (143,878 lb)

20

TD-14M Extra (STD & LT) TD-14M Extra (LGP) TD-14R (STD & LT) TD-14R (LGP)

Suspension Oscillation-type with equalizer bar and forward mounted pivot shafts

Tracks Large deep-heat-treated for maximum wear resistance

Track gauge 1,880 mm (74 in) 2,136 mm (84 in) 1,930 mm (76 in) 2,240 mm (88 in)

Track shoe width 560 mm (22 in) 915 mm (36 in) 560 mm (22 in) 915 mm (36 in)

Chain and rollers Sealed and lubricated track links and through-hardened, sealed, and lubricated rollers

Shoes, each side STD 40 / LT 46 46 STD 40 / LT 46 46

Track rollers, each side STD 7 / LT 8 8 STD 7 / LT 8 8

Track length on groundSTD 2,600 mm (102 in) LT 3,170 mm (125 in)

3,170 mm (125 in)STD 2,600 mm (102 in) LT 3,170 mm (125 in)

3,170 mm (125 in)

Ground contact areaSTD 29,000 cm2 (4,495 in2) LT 36,000 cm2 (5,580 in2)

58,000 cm2 (8,990 in2)STD 29,000 cm2 (4,495 in2) LT 36,000 cm2 (5,580 in2)

58,000 cm2 (8,990 in2)

Ground pressureSTD 55.5 kPa (8.0 psi)LT 47.5 kPa (6.9 psi)

31.4 kPa (4.6 psi)STD 55.5 kPa (8.0 psi)LT 47.5 kPa (6.9 psi)

30.4 kPa (4.4 psi)

Track pitch 215.9 mm (8.5 in)

Sprocket sements, each side 1

TD-20M Extra/R Extra (STD & LT) TD-20M Extra/R Extra (LGP)



Track gauge 1,980 mm (78 in) 2,180 mm (86 in)

Track shoe width 560 mm (22 in) 864 mm (34 in)


Shoes, each side STD 40 / LT 42 42

Track rollers, each side 7

Track length on ground STD 2,860 mm (113 in) / LT 3,080 mm (121 in) 3,080 mm (121 in)

Ground contact area STD 32,000 cm² (4,972 in²) / LT 34,000 cm² (5,324 in²) 53,000 cm² (8,228 in²)

Ground pressure STD 72.4 kPa / LT 68.8 kPa 52 kPa

Track pitch 215.9 mm (8.5 in)


UNDERCARRIAGE

TD-15M Extra/R Extra (STD & LT) TD-15M Extra/R Extra (WT) TD-15M Extra/R Extra (LGP)



Track gauge 1,930 mm (76 in) 2,030 mm (80 in) 2,160 mm (85 in)

Track shoe width 508 mm (20 in) 762 mm (30 in) 940 mm (37 in)


Shoes, each side STD 39 / LT 43 43 43

Track rollers, each side STD 6 / LT 8 8 8

Track length on groundSTD 2,640 mm (104 in)LT 3,050 mm (120 in)

3,050 mm (120 in) 3,050 mm (120 in)

Ground contact areaSTD 27,000 cm2 (4,160 in2)LT 31,000 cm2 (4,800 in2)

46,000 cm2 (7,200 in2) 57,000 cm2 (8,880 in2)

Ground pressureSTD 75.4kPa (10.9 psi)

LT 65.8 kPa (9.5 psi)44.9 kPa (6.5 psi) 45.7 kPa (6.7 psi) 36.9 kPa (5.4 psi) 37.4 kPa (5.5 psi)

Track pitch 215.9 mm (8.5 in) - 215.9 mm (8.5 in)


21

TD-14M Extra/14R (STD & LT) TD-14M Extra/14R (LGP)

Base weight (with 6-WAY blade, standard equipment, cab ROPS/FOPS, full fuel tank, and 79 kg (175 lb) operator)

STD 16,100 kg (35,494 lb) / LT 17,100 kg (37,699 lb) 18,200 kg (40,124 lb)

Optional Components

Ripper 3-shank type 1,644 kg (3,551 lb)

Track shoes

610 mm (24 in) STD 128 kg (282 lb) / LT 146 kg (322 lb)

TD-20M Extra (STD & LT) TD-20M Extra (LGP) TD-20R Extra (STD & LT) TD-20R Extra (LGP)

Base weight with Semi-U blade w/tilt, drawbar, standard equipment, cab ROPS/FOPS, full fuel tank, and 79 kg [175 lb] operator)

STD 24,200 kg (53,352 lb) LT 24,760 kg (54,587 lb)

25,230 kg (55,623 lb)STD 24,250 kg (53,462 lb) LT 24,810 kg (54,700 lb)

25,280 kg (55,733 lb)

Optional Components

Ripper 3-shank type 456 kg (1,874 lb) - 456 kg (1,874 lb) -

Track shoes

610 mm (24 in) 176 kg (388 lb) - 176 kg (388 lb) -

660 mm (26 in) 336 kg (775 lb) - 336 kg (775 lb) -

OPERATING WEIGHTS

TD-15M Extra/R Extra (STD & LT) TD-15 M Extra/R Extra (WT) TD-15 M Extra/R Extra (LGP)

Base weight with Semi-U blade w/tilt, drawbar, standard equipment, cab ROPS/FOPS, full fuel tank, and 79 kg (175 lb) operator

STD 20,660 kg (45,547 lb)LT 20,810kg (45,878 lb)

STD 20,760kg (45,768 lb)LT 20,910kg (46,099 lb)

21,315 kg (46,991 lb)

21,415 kg (47,212 lb)

21,620 kg (47,663 lb)

21,720 kg (47,884 lb)

Optional Components

Ripper single-shank type 1,546 kg (3,408 lb) 1,546 kg (3,408 lb) 1,546 kg (3,408 lb) - -

Ripper 3-shank type 1,743 kg (3,843 lb) 1,743 kg (3,843 lb) 1,554 kg (3,427 lb) - 2,160 mm (85 in)

Track shoes 508 mm (20 in) 762 mm (30 in) 940 mm (37 in)

508 mm (20 in) - -877 kg (-1,933 lb) -

560 mm (22 in) 125 kg (276 lb) -740 kg (-1,631 lb) -

610 mm (24 in) 265 kg (584 lb) -585 kg (-1,290 lb) -

660 mm (26 in) 406 kg (895 lb) -430 kg (-948 lb) -1,100 kg (-2,425 lb)

22

TD-14M Extra/14R (STD & LT) TD-14M Extra/14R (LGP)

Semi-U / 6-way Straight / 6-way

A Overall height -ROPS 3,240 mm (128 in) 3,240 mm (128 in)

B Grouser height 65 mm (2.56 in) 65 mm (2.56 in)

C Ground clearance 430 mm (16.9 in) 430 mm (16.9 in)

D Overall length, base machine STD 3,630 mm (143 in) / LT 4,200 mm (165 in) 4,200 mm (165 in)

D1 Length with blade and drawbar STD 5,130 mm (16’ 10”) / LT 5,690 (18’ 8”) 5,500 mm (18 ft) 5,540 mm (18 ft 2 in)

D2 Length with blade and 3-shank ripper

STD 6,300 mm (20’ 8”) LT 6,870 mm (22’ 1.6”)

STD 6,490 mm (21’ 4”) LT 6,720 mm (22’ 1”)

-

E Track length on ground STD 2,600 mm (102 in) / LT 3,170 mm (125 in) 3,170 mm (125 in)

F Width over track 2,490 mm (98 in) 3,050 mm (120 in)

TD-14M Extra (LGP) TD-14R (LGP)

F1 Width over trunnions 2,710 mm (8’ 11”) 2,760 mm (9’ 1”) 3,305 mm (10’ 10”) 3,400 mm (11’ 2”)

G Track gauge 1,880 mm (74”) 1,930 mm (76”) 2,136 mm (84”) 2,240 mm (88”)

MACHINE DIMENSIONS

TD-15M Extra/R Extra (STD & LT) TD-15M Extra/R Extra (WT) TD-15M Extra/R Extra (LGP)

Semi-U Angle Semi-U 6-way Straight 6-way

A Overall height - FOPS cab 3,350 mm (132 in)

A1 Overall height -ROPS 3,450 mm (136 in)

B Grouser height 64 mm (2.52 in)

C Ground clearance 445 mm (17.5 in)

D Overall length, base machineSTD 4,050 mm (13’ 3.3”)

LT 4,220 mm (13’ 10”)4,220 mm (13’ 10”)

4,220 mm (13’ 10”)

4,220 mm (13’ 10”)

4,220 mm (13’ 10”)

4,220 mm (13’ 10”)

D1 Length with blade

STD 5,230 mm (17’ 2”)

LT 5,670 mm (18’ 7”)

STD 5,390 mm (17’ 8”)

LT 5,830 mm (19’ 2”)

5,670 mm (18’ 7”)

5,870 mm (19’ 3”)

5,520 mm (18’ 1”)

5,870 mm (19’ 3”)

D2 Length with blade and 1-shank /3-shank ripper

STD 6,250 mm/ 6,480 mm

(20’ 6”/21’ 3”) LT 6,760 mm/ 6,910

mm (22’ 2” /22’ 8”)

STD 6,400 mm/ 6,550 mm (21’ 6”)

LT 6,840 mm/ 6,990 mm

(22’ 5”/22’ 11”)

6,790 mm/ 6,940 mm

(22’ 3”/22’ 9”)

6,880 mm/ 7,030 mm

(22’ 7”/23’ 1”)- -

E Track length on ground

STD 2,640 mm (104 in)

LT 3,050 mm (120 in)

3,050 mm (120 in) 3,050 mm (120 in) 3,050 mm (120 in) 3,050 mm (120 in) 3,050 mm (120 in)

F Width over track 2,440 mm (96 in) 2,440 mm (96 in) 2,790 mm (110 in) 2,790 mm (110 in) 3,100 mm (122 in) 3,100 mm (122 in)

F1 Width over trunnions 2,810 mm (110.6 in) 2,810 mm (110.6 in) 2,910 mm (114.5 in) - 3,340 mm (131.5 in) -

G Track gauge 1,930 mm (76 in) 1,930 mm (76 in) 2,030 mm (80 in) 2,030 mm (80 in) 2,160 mm (85 in) 2,160 mm (85 in)

TD-20M Extra/TD-20R Extra

A Overall height - FOPS cab 3,480 mm (137 in)

A1 Overall height - ROPS 3,570 mm (141 in)

A2 Overall height - end of exhaust pipe 3,930 mm (12’ 11”)

B Grouser height 67 mm (2.63 in)

C Ground clearance 460 mm (18.1 in)

D Overall length, base machine 4,340 m (171 in)

D1 Length with blade STD 5,690 m (18’ 8”) / LT 5,910 m (19’ 5”)

D2 Length with blade and 1-shank /3-shank ripper

STD 6.89 m / 7.05 m (22’ 7”/23’ 2” ) / LT 7.11 m / 7.27 m (23’ 4”/23’ 10”)

E Track length on ground STD 2,860 mm (113 in) / LT 3,080 mm (121 in)

F Width over track 2,540 mm (100 in)

F1 Width over trunnions 2,890 mm (9 ft 6 in)

G Track gauge 1,980 mm (78 in) 23

TD-14M Extra/14R (STD & LT)

TD-14M Extra (STD & LT)

TD-14M Extra (LGP)TD-14R

(STD & LT)TD-14R (LGP)

Type Semi-U 6-way Straight 6-way 6-way Straight 6-way

SAE capacity 4.28 m3 (5.6 yd3) 3.2 m3 (4.2 yd3) 3.05 m3 (4.0 yd3) 3.8 m3 (5.0 yd3) 3.4 m3 (4.5 yd3) 3.17 m3 (4.14 yd3)

4 m3 (5.2 yd3)

H Blade height 1,230 mm (48 in) 1,200 mm (47 in) 1,020 mm (40 in) 1,170 mm (46 in) 1,170 mm (46 in) 1,030 mm (40.5 in)

1,170 mm (46 in)

I Blade width 3,370 mm (133 in) 3,220 mm (147 in) 3,700 mm (146 in) 3,830 mm (151 in) 3,720 mm (147 in) 3,840 mm (151 in)

3,980 mm (156.7 in)

J Blade lift height STD 990 mm (39 in) LT 1,060 mm (42 in)

STD 1,090 mm (42 .9 in) LT 1,086 mm (42.7 in) 1,056 mm (41.6 in) 1,085 mm (42.7 in) STD 1,090 m (42.9 in)

LT 1,086 mm (42.7 in)1,056 mm (41.6 in)

1,085 mm (42.7 in)

K Blade angle - 18,5 deg - 18,5 deg 23,5 deg - 23,5 deg

L Blade digging depth STD 515 mm (20.3 in) LT 500 mm (19.7 in)

STD 580 mm (22.8 in) LT 536 mm (21.1 in) 500 mm (19.7 in) 536 mm (21.1 in) STD 580 mm (22.8 in)

LT 536 mm (21.1 in)500 mm (19.7 in)

536 mm (21.1 in)

M Maximum tilt STD 545 mm (22 in) LT 510 mm (20 in) 510 mm (20 in) 595 mm (23 in) 595 mm (23 in) 510 mm (20 in) 595 mm (23 in)

N Maximum blade pitch adjustment 9 deg 7 deg 9 deg 8 deg 7 deg 9 deg 8 deg

O Overall width with blade angled - 3,220 mm (10’ 6”) - 3,980 mm (13 ft) 3,420 mm (11’ 3”) -3,980 mm

(13 ft )

BLADE SPECS

TD-14M Extra/14R TD-15M/R Extra TD-20M Extra/R Extra

Single-shank Multi-shank (3-shank) Single-shank standard Multi-shank (3-shank)

R Maximum clearance under tip (raised)

568 mm (22 in) 485 mm (19 in) 455 mm (17.9 in) 538 mm (21.2 in) 596 mm (23.5 in)

S Overall beam width 2,040 mm (80.3 in) 1,100 mm (43 in) 2,230 mm (88 in) 1,383 mm (54 in) 2,130 mm (84 in)

T Slope angle (full raise) 25 deg

U Ripping width 1,980 mm (74 in) - 2,030 mm (6’ 8”) - 1,982 mm (78 in)

V Spacing center to center 940 mm (37 in) - 1,015 mm (3’ 4”) - 991 mm (39 in)

X Maximum penetration 660 mm (26 in) 713 mm (28 in) 600 mm (24 in) 834 mm (32.8 in) 700 mm (27.6 in)

Z Maximum pitch adjustment - - - 25 deg 25 deg

Penetration force 67 kN (15,062 lb) 71.04 kN (15,970 lb) 64 kN (14,387 lb) 89.99 kN (20,230 lb) 91.1kN (20,479 lb)

Pryout force 191 kN (42,937 lb) 390.9 kN (87,874 lb) 268.7 kN (60,404 lb) 272.3 kN (61,213 lb) 282.2kN (63,439 lb)

Shank positions (vertical) 2

Weight of ripper w/ 1 shank 1,422 kg (3,135 lb) 1,546 kg (3,408 lb) 1,554 kg (3,427 lb) 2,845 kg (6,272 lb) 2,900 kg (6,400 lb)

Weight of shank 111 kg (245 lb) 111 kg (245 lb) 94.5 kg (208 lb) - 196 kg (432 lb)

Parallelogram ripper Parallelogram ripper with hydraulic pitch adjustment

RIPPER

24

BLADE SPECSTD-15M Extra/R Extra (STD & LT) TD-15M Extra/R Extra (WT) TD-15M Extra/R Extra (LGP)

Semi-U Angle Semi-U 6-way Straight 6-way

SAE capacity 5.7m3 (9.2 yd3) 3.8 m3 (5.0 yd3) 5.95 m3 (7.8 yd3) 3.8 m3 (5.0 yd3) 3.6 m3 (4.7 yd3) 4.0 m3 (5.2 yd3)

H Blade height 1,460 mm (58”) 1,120 mm (3’ 8”) 1,460 mm (58”) 1,360 mm (4’ 7”) 1,100 mm (43”) 1,360 mm (53,5”)

I Blade width 3,440 mm (135”) 4,130 mm (163”) 3,590 mm (141”) 3,680 mm (154”) 3,860 mm (152”) 3,830 mm (151”)

J Blade lift height STD 1,104 mm (43,5”)LT 1,102 mm (43,4”)

STD 1,102 mm (43,4”) LT 1,119 mm (44”) 1,102 mm (43,4”) 1,280 mm (50,4”) 1,240 mm (49”) 1,280 mm (50,4”)

K Blade angle - 25 deg - 23.5 deg - 23.5 deg

L Blade digging depth 463 mm (18,2”)STD 552 mm (21.7”) LT 542 mm (21.3”) STD 463 mm (18.2”) STD 692 mm (27”) 455mm (18”) 692mm (27”)

M Maximum tilt 742 mm (28,5”) 385 mm (15,2”) 782 mm (30,8”) 450 mm (18”) 698 mm (27,5”) 466 mm (18,3”)

N Maximum blade pitch adjustment 9 deg - 9 deg 8 deg 10 deg 8 deg

O Overall width with blade angled - 3,750 mm (12’ 4”) - 3,330 mm (10’ 11”) - 3,510 mm (11’ 6”)

TD-20M Extra / TD-20R Extra

Semi-U Full-U Angle Straight LGP

SAE capacity 7.04 m3 (9.2 yd3) 8.45 m3 (11.1 yd3) 3.88 m3 (5.1 yd3) 6.03 m3 (7.9 yd3)

H Blade height 1,600 mm (5’ 3”) 1,600 mm (5’ 3”) 1,090 mm (43 in) 1,360 mm (54 in)

I Blade width 3,500 mm (11’ 6”) 3,860 mm (152 in) 4,410 mm (174 in) 4,370 mm (172 in)

J Blade lift heightSTD 1,150 mm (45 in) LT 1,220 mm (48 in)

STD 1,150 mm (45 in) LT 1,220 mm (48 in)

STD 1,160 mm (46 in) LT 1,230 mm (48.4 in)

1,210 m (47.6 in)

K Blade angle - - 25 deg -

L Blade digging depthSTD 505 mm (19.9 in) LT 532 mm (20.9 in)

STD 505 mm (19.9 in) LT 532 mm (20.9 in)

STD 615 mm (24.2 in) LT 647 mm (25.5in)

522 mm (20.6 in)

M Maximum tilt 670 mm (26.3 in) 720 mm (28.3 in) 480 mm (19 in) 660 mm (26 in)

N Maximum blade pitch adjustment 25 deg 25 deg - -

O Overall width with blade angled - - STD 5,770 mm (18’ 11”) -

BLADE SPECS

25

STANDARD EQUIPMENT TD-14 M Extra /TD-14 R

ENGINE

TD-14 M Extra: Cummins QSB6.7, EPA Tier 3/EU Stage IIIA, turbocharged, direct start, direct injection, 120 kW (160 Hp)

TD-14 R: Cummins QSB6.7, EPA Tier 4 Interim/EU Stage IIIB, 119 kW (160 Hp), turbocharged (HPCR), direct injection, Diesel Particulate Filter (DPF) with catalyst, electronic control module (ECM)––––––––––––Antifreeze, -37°C (-34°F)

Cooling module; includes radiator, transmission oil cooler, charge air cooler; isolation mounted

Exhaust pipe extension with elbow

Filters, engine oil, full flow and by-pass with replaceable “spin-on” elements

Strainers, fuel and hydraulic tank

Muffler, under engine hood, insulated

Water separator, fuel system––––––––––––TD-14 M Extra: Air cleaner, dry type, dual stage with dust discharge valve

Fan, belt-driven, blower

TD-14 R: Air cleaner, dry type, dual stage with dust discharge valve and service indicator

Fan, hydraulically driven, suction type, variable speed

DRIVETRAIN

Torque converter, single stage

Transmission, power shift, 3 speeds forward, 3 reverse, combined with 2 speed steering provides 6 speeds forward, 6 reverse, preset travel speed selection and auto-downshift

Steering, planetary type, 2 speed, left hand single lever control (joystick)

Filters, power train, equipment hydraulics,“spin-on” micro glass type

Brakes, foot, spring applied, hydraulically released

Decelerator - right foot pedal, and brake - center foot pedal

Final drive, 2-stage

OPERATOR’S ENVIRONMENT

Air conditioner/heater/pressurizer/defroster, underseat mounted, A/C condenser behind roof

AM/FM radio ready

Cab with 2 post ROPS, with sound suppression, 4 wipers w/ washers, inside mirror, dome light, tinted safety glass and air recirculation system (approved according to ROPS - SAE J1040 and FOPS - SAE J231)

Seat, air suspension type, adjustable with arm rests, swivel 14° to right

Seat belt (SAE J386) - 3” wide retractable

Sun visor for front cab window

Tools compartment

INSTRUMENTATION

Engine ECM failure warning lights and switches

Gear, range, drive train and engine diagnostic display

Gauges: fuel level, engine coolant temperature, engine oil pressure, drive train system oil temperature, voltmeter, hourmeter, tachometer

Warning lights: air cleaner filter, drive train oil filters, hydraulic oil filters, transmission/clutch oil low pressure, coolant high temperature, drive train oil high temperature, fan drive oil filter, engine inlet air heater

Audible and visual warning system: low engine coolant level, low engine oil pressure

ELECTRICAL

Alarm, back-up

Dual batteries 12 V, 960 CCA, cold start, maintenance free

Horn, electric

Lights for cab, 2 front, 2 rear

Lights with guards, 2 front - lift cylinders mounted, 2 rear - fuel tank mounted

Receptacle, starting/charging plug

Starting, 24 V

Starting aid - air grid heater

TD-14 M Extra: Alternator 50 A

TD-14 R: Alternator 70 A

UNDERCARRIAGE (STD)

Track adjusters, hydraulic

Track chain, sealed and lubricated (LTS) with split master link, 40 links

Track chain center guides

Track chain end guides, integral

Track shoes, 560 mm (22 in) square corner

TD-14 M Extra: Track frame, 7 roller, 1,880 mm (74 in) gauge, oscillating type, lifespan lubricated rollers and idlers

TD-14 R: Track frame, 7 roller, 1,930 mm (76 in) gauge, oscillating type, lifespan lubricated rollers and idlers

UNDERCARRIAGE (LT)






TD-14 M Extra: Track frame, 8 roller, 1,880 mm (74 in) gauge, oscillating type, lifespan lubricated rollers and idlers

TD-14 R: Track frame, 8 roller, 1,930 mm (76 in) gauge, oscillating type, lifespan lubricated rollers and idlers

UNDERCARRIAGE (LGP)




TD-14 M Extra: Track chain, sealed and lubricated (LTS) with split master link, 46 links

Track frame, 8 roller, 2136 mm (84 in) gauge, oscillating type, lifespan lubricated rollers and idlers


TD-14 R: Track chain, sealed and lubricated (LTS) with split master link, 46 links

Track frame, 8 roller, 2,240 mm (88 in) gauge, oscillating type, lifespan lubricated rollers and idlers


GUARDS

Crankcase, hinged, with front pull hook, transmission, fan, radiator, sprocket rock and dirt deflector

Engine hood, solid, sloped

Engine side doors, hinged, perforated type

Final drive seal guard

Radiator guard door, louvered, hinged

Tank guard, bolted (0.5 in plate protects fuel tank and hydraulic reservoir). Includes deduct for standard rear access platform

HYDRAULIC CONTROLS

3-spool valve, 1 lever with pilot operated blade control (lift/tilt), ready for ripper

OTHER STANDARD EQUIPMENT:

Diagnostic centers for power train and equipment hydraulic pressures

Ecological drains for engine oil, radiator coolant and hydraulic oil

Hitch, retrieval

Manuals, parts and operator’s

TD-14 M Extra: Rear access steps

26

OPTIONAL EQUIPMENT TD-14 M Extra /TD-14 R

BLADE EQUIPMENT (STD & LT)

Semi-U, 4.28 m³ (5.6 yd³), complete with all blade components, includes hydraulic tilt and manual pitch

TD-14 M Extra: 6-way, 3.2 m³ (4.2 yd³), full hydraulic, inside arm with hydraulic tilt and angle and manual pitch, complete with all blade components.

TD-14 R: 6-way, 3.4 m³ (4.5 yd³), full hydraulic, inside arm with hydraulic tilt and angle and manual pitch, complete with all blade components.

BLADE EQUIPMENT (LGP)

TD-14 M Extra: Straight, 3.05 m³ (4.0 yd³), complete with all blade components, includes hydraulic tilt and manual pitch

6-way, 3.8 m³ (5.0 yd³), full hydraulic, inside arm with hydraulic tilt and angle and manual pitch, complete with all blade components.

TD-14 R: Straight, 3.17 m³ (4.15 yd³), complete with all blade components, includes hydraulic tilt and manual pitch

6-way, 4.0 m³ (5.23 yd³), full hydraulic, inside arm with hydraulic tilt and angle and manual pitch, complete with all blade components.

REAR MOUNTED EQUIPMENT (STD & LT)

Fixed drawbar

Ripper, multi-shank beam, with three shanks

REAR MOUNTED EQUIPMENT (LGP)

Fixed drawbar

TRACK SHOES (STD)

610 mm (24 in) shoes, square corner

TRACK SHOES (LT)

610 mm (24 in) shoes, square corner


Heater/pressurizer/defroster, cab without air conditioner (A/C)

For use with cab:

• Air recirculation system with MSHA filters, severe service

• AM/FM CD radio

• Mirrors, 2 pcs, exterior

• Sun visors (2), additional, for side door windows

• Lights, 2 front, ROPS mounted

Canopy ROPS/FOPS

Includes deduction for standard cab and air conditioner.

Includes vinyl seat, operator platform covers, instrument panel guard

ROPS structure for use with sweeps

Includes vinyl seat, operator platform covers and instrument panel guard. Not for use with cab

GUARDS

Track roller guard (full length)

Transmission and engine crankcase guards, severe service. Crankcase guard with front pull hook

Engine hood, perforated

SCREENS

Sweeps, forestry, front and rear; include exhaust pipe extension with guard and guard for fuel tank and hydraulic reservoir

Screen rear (required for winch application), for use with forestry sweeps

Screen for all cab windows (front, rear, side, doors) bolted, painted black

Screen for cab lights (2 front, 2 rear), painted black

Screen for tractor lights (2 front, 2 rear)

Screen for ROPS mounted lights (2 front)

ADDITIONAL OPTIONS

Inspection lamp, 24 V, portable, with 6 m (20’) cable

Vandalism protection for use with engine enclosures

Maintenance tool kit, 17 items in a metal box

1000 h maintenance package (filters)



Starting/charging receptacle plug assembly (required to jump-start or charge batteries)

EXPORT PACKING

Export packing, drive on / drive off; machine on the trailer

Export packing, drive on / drive off machine on the railway wagon

SFRs

Trimble Ready Option: factory preinstalled hydraulics, harness and brackets for the Trimble

Grade Control System components

Beacon light, rotating

Centralized Lubricating System for machine with/without ripper

Fuel Filtration System Fleetguard

Fuel heater

27

STANDARD EQUIPMENT TD-15 M Extra /TD-15 R EXTRA

ENGINETD-15 M Extra: Cummins QSC 8.3, EPA Tier 3/EU Stage III A, turbocharged, direct start, direct injection, 142 kW (190 Hp)TD-15 R Extra: Cummins QSB 6.7, EPA Tier 4 Final/EU Stage IV, emission certified, turbocharged, High Pressure Common Rail (HPCR), Diesel Oxidation Catalyst (DOC) + selective catalytic reduction (SCR), electronic control module (ECM), 154 kW (205 Hp)–––––––––––– Antifreeze, -37°C (-34°F)Cooling module; includes radiator, transmission oil cooler, charge air cooler (CAC); isolation mountedCoolant filter conditionerExhaust pipe extension with elbowFilters, engine oil, full flow and by-pass with replaceable “spin-on” elementsWater separator, fuel system–––––––––––– TD-15 M Extra: Air cleaner, dry type with exhaust aspirated primary, safety elements and service indicatorFan, belt-driven, blowerMuffler, under engine hood, insulatedTD-15 R Extra: Air cleaner, Cummins Filtration Direct Flow™, dry type with pre-cleaner, dust ejector system, exhaust aspiration and electronic service indicatorFan, hydraulically driven, blower

DRIVETRAINTorque converter, single stageTransmission, power shift, 3 speeds forward, 3 reverse, combined with 2 speed steering provides 6 speeds forward, 6 reverse, preset travel speed selection and auto-downshiftSteering, planetary type, 2 speed, left hand single lever control (joystick)TD-15 M Extra: Filters, power train, equipment hydraulics, “spin-on” micro glass typeBrakes, foot, spring applied, hydraulically releasedDecelerator - right foot pedal, and brake - center foot pedalFinal drive, 2-stage

OPERATOR’S ENVIRONMENTAir conditioner/heater/pressurizer/defroster, underseat mounted, A/C condenser behind roofAM/FM radio readyCab with 2 post ROPS, with sound suppression, 4 wipers w/washers, inside mirror, dome light, tinted safety glass and air recirculation system (approved according to ROPS - SAE J1040 and FOPS - SAE J231)Seat, air suspension type, fabric cover, adjustable with arm rests, swivel 14° to rightSeat belt (SAE J386) - 3” wide, retractableSun visor for front cab windowTools compartment

INSTRUMENTATIONTD-15 M Extra: Gauges: fuel level, engine coolant temperature, engine oil pressure, torque converter oil temp, voltmeter, hourmeter, joystick control displayWarning lights: air cleaner filter, transmission oil filter, hydraulic oil filter, transmission / clutch oil low pressureAudible & visual warning system: low engine coolant level, low engine oil pressureTD-15 R Extra: Electronic Monitoring System, LCD display:Normal and diagnostic operating modes for engine and drive train, hourmeter, gear, rangeGauges: voltmeter (battery charge), drive train oil temperature, fuel level, coolant temperature, tachometer (engine rpm), AdBlue® tank levelEngine and drive train diagnostics program indicator lightsEngine intake air heating (grid heater) indicator lightWarning lights: engine ECM status, high drive train oil temperature, low coolant level, low engine oil pressure, high coolant temperature, low fuel level, high exhaust system temperature, AdBlue® tank low level, battery charge level, low transmission/clutch oil pressureWarning lights - filters: air cleaner filter, exhaust system (SCR) filter, fan drive system filter, hydraulic oil filters, drive train pressure filterAudible alarm for low coolant level, low engine oil pressure, high coolant temperature

ELECTRICALAlarm, back-upDual batteries 12 V, 960 CCA, cold start, maintenance freeHorn, electricLights for cab, 2 front, 2 rearLights with guards, 2 front - lift cylinders mounted, 2 rear - fuel tank mountedReceptacle, starting/charging plugStarting, 24 VStarting aid - air grid heaterTD-15 M Extra: Alternator 50 ATD-15 R Extra: Alternator 110 A

GUARDSCrankcase, hinged, with front pull hook, transmission, fan, radiator, sprocket rock and dirt deflectorEngine hood, solid, slopedEngine side doors, hinged, perforated typeFinal drive seal guardRadiator guard door, louvered, hinged

UNDERCARRIAGE (STD)Track adjusters, hydraulicTrack chain, sealed and lubricated (LTS) with split master link, 39 linksTrack chain end guides, integralTrack frame, 6 roller, 1,930 mm (76 in) gauge, oscillating type, lifespan lubricated rollers and idlersTrack shoes, 508 mm (20 in) severe service

UNDERCARRIAGE (LT)Track adjusters, hydraulicTrack chain, sealed and lubricated (LTS) with split master link, 43 linksTrack chain center guidesTrack chain end guides, integralTrack frame, 8 roller, 1,930 mm (76 in) gauge, oscillating type, lifespan lubricated rollers and idlersTrack shoes, 508 mm (20 in) severe service

UNDERCARRIAGE (WT)Track adjusters, hydraulicTrack chain, sealed and lubricated (LTS) with split master link, 43 linksTrack chain center guidesTrack chain end guides, integralTrack frame, 8 roller, 2,030 mm (80 in) gauge, oscillating type, lifespan lubricated rollers and idlersTrack shoes, 762 mm (30 in) severe service

UNDERCARRIAGE (LGP)Track adjusters, hydraulicTrack chain, sealed and lubricated (LTS) with split master link, 43 linksTrack chain center guidesTrack chain end guides, integralTrack frame, 8 roller, 2,160 mm (85 in) gauge, oscillating type, lifespan lubricated rollers and idlersTrack shoes, 940 mm (37 in) extreme clipped corner with bolt holes for third rail track

HYDRAULIC CONTROLS3-spool valve, 1 lever with pilot operated blade control (lift/tilt), ready for ripper

OTHER STANDARD EQUIPMENT:Diagnostic centers for power train and equipment hydraulic pressuresEcological drains for engine oil, radiator coolant and hydraulic oilHitch, retrievalRear access platformManuals, parts and operatorsTD-15 R Extra: Filters: power train, equipment hydraulics, fuelTD-15 M Extra: Fuel strainer and hydraulic tank

28

OPTIONAL EQUIPMENT TD-15 M Extra /TD-15 R EXTRA

BLADE EQUIPMENT (STD & LT)Semi-U, 5.70 m3 (7.45 yd³), complete with all blade components, includes hydraulic tilt and manual pitch or hydraulic tilt/pitchAngle (manual angle), 3.8 m3 (5.0 yd³), complete with all blade components, includes heavy duty struts, with or without hydraulic tilt(WT) Semi-U, 5.95 m3 (7.78 yd³), complete with all blade components, includes hydraulic tilt and manual pitch or hydraulic tilt/pitchAngle (6-way), 3.8 m3 (5.0 yd³), full hydraulic, inside arm with hydraulic tilt and angle and manual pitch, complete with all blade components and steps on track frame(LGP) Straight, 3.6 m3 (4.7 yd³), complete with all blade components, includes hydraulic tilt and manual pitchAngle (6-way), 4.0 m3 (5.2 yd³), full hydraulic, inside arm with hydraulic tilt and angle and manual pitch, complete with all blade components and steps on track frame

REAR MOUNTED EQUIPMENT (STD & LT) (WT)Fixed drawbar Replaces the standard retrieval hitchRipper, multi-shank beam, with three shanks, partially mounted, includes deduct for standard hitchRipper, single-shank beam, with shank, partially mounted, includes deduct for standard hitch

REAR MOUNTED EQUIPMENT (LGP)Fixed drawbar TRACK SHOES(STD)560 mm (22 in) shoes, severe service610 mm (24 in) shoes, severe service660 mm (26 in) shoes, severe service(LT)560 mm (22 in) shoes, square corner, severe service610 mm (24 in) shoes, square corner, severe service660 mm (26 in) shoes, square corner, severe service(WT)508 mm (20 in) shoes, square corner, severe service560 mm (22 in) shoes, square corner, severe service610 mm (24 in) shoes, square corner, severe service660 mm (26 in) shoes, square corner, severe service(LGP)660 mm (26 in) shoes, square corner, severe serviceStd 940 mm (37 in) shoes with third rail track system (adds half chain assembly to outer ends of 37 in shoes)

OPERATOR’S ENVIRONMENTHeater/pressurizer/defroster, cab without air conditioner (A/C)For use with cab: • Air recirculation system with MSHA filters, severe service• AM/FM CD radio• Mirrors, 2 pcs, exterior• Sun visors (2), additional, for side door windows• Lights, 2 front, ROPS mountedCanopy ROPS/FOPS (Includes vinyl seat, operator platform covers, instrument panel guard and lights, 2 front, 2 rear.)ROPS structure for use with sweeps (Includes vinyl seat, operator platform covers and

instrument panel guard)

SCREENSSweeps, forestry, front and rear, for standard cab with ROPSor open ROPS machine; include exhaust pipe extensionwith guard and guard for fuel tank and hydraulic reservoirScreen, rear (required for winch application),for use with forestry sweepsScreens for cab windows (front, rear, side, doors)bolted, black paintedScreens for cab lights (2 front, 2 rear), black paintedScreens for tractor lights (2 front, 2 rear)Screens for ROPS mounted lights, (2 front)

GUARDSFinal drive rock guardTrack roller guards, full lengthTransmission and engine crankcase guards, heavy duty; crankcase guard with front pull hookEngine hood, perforatedTank guard, bolted (0.5 in plate protects fuel tank and hydraulic reservoir)

ADDITIONAL OPTIONSTD-15 M Extra: Sound suppression package, for use with std solid hoodStarting/charging receptacle plug assembly (required to jump-start or charge batteries)Vandalism protection for use with engine enclosuresMaintenance tool kit, 17 items in a metal box1000 h maintenance package (filters)1500 h maintenance package (filters)2000 h maintenance package (filters)TD-15 M Extra: inspection lamp, portable

EXPORT PACKINGExport packing, drive on / drive off Machine on the trailer Export packing, drive on / drive off Machine on the railway wagon

SFRsCentralized Lubricating System, for machine with or without ripperTrimble Ready Option; factory preinstalled hydraulics, harness and brackets for the Trimble Grade Control System components

29

STANDARD EQUIPMENT TD-20 M Extra /TD-20 R EXTRA

ENGINE

TD-20 M Extra: Cummins QSC 8.3, EPA Tier 3/EU Stage III A, turbocharged, direct start, direct injection, 179 kW (240 Hp)

TD-20 R Extra: Cummins QSL 9, Tier 4 Final/EU Stage IV, turbocharged with high pressure injection (HPI), selective catalytic reduction (SCR), electronic control module (ECM), 185 kW (248 Hp)––––––––––––Antifreeze, -37°C (-34°F)

Cooling module; includes radiator, transmission oil cooler, hydraulic oil / fan drive oil cooler, charge air cooler (CAC); isolation mounted

Coolant filter conditioner

Exhaust pipe extension with elbow

Fan, hydraulically driven, suction type, variable speed

Filters, engine oil, full flow and by-pass with replaceable “spin-on” elements

Water separator, fuel system––––––––––––TD-20 M Extra: Air cleaner, dry type with exhaust aspirated primary, safety elements and service indicator

Muffler, under engine hood, insulated

TD-20 R Extra: Air cleaner, Cummins Filtration Direct Flow™, dry type with precleaner, exhaust aspiration and electronic service indicator

Diesel Particulate Filter with catalyst (DPF)

DRIVETRAIN

Torque converter, single stage

Transmission, power shift, 3 speeds forward, 3 reverse, combined with 2 speed steering provides 6 speeds forward, 6 reverse, preset travel speed selection and auto-downshift

Steering, planetary type, 2 speed, left hand single lever control (joystick)

Filters, power train, equipment hydraulics, “spin-on” micro glass type

Brakes, foot, spring applied, hydraulically released

Decelerator - right foot pedal, and brake - center foot pedal

Final drive, 2-stage, planetary


Air conditioner/heater/pressurizer/defroster, underseat mounted, A/C condenser behind roof

AM/FM radio ready

Cab with 2 post ROPS, with sound suppression, 4 wipers w/washers, inside mirror, dome light, tinted safety glass and air recirculation system (approved according to ROPS - SAE J1040 and FOPS - SAE J231)

Seat, air suspension type, fabric cover, adjustable with arm rests, swivel 14° to right

Seat belt (SAE J386) - 3” wide retractable

Sun visor for front cab window

Tools compartment

INSTRUMENTATION

TD-20 M Extra: Gauges: fuel level, engine coolant temperature, engine oil pressure, torque converter oil temp., voltmeter, hourmeter, joystick control display

Warning lights: air cleaner filter, transmission oil filter, hydraulic oil filter, transmission/clutch oil low pressure

Audible & visual warning system: low engine coolant level, low engine oil pressure

TD-20 R Extra: Electronic Monitoring System, LCD display: Normal and diagnostic operating modes for engine and drive train, houmeter, gear, range

Gauges: voltmeter (battery charge), drive train oil temperature, fuel level, coolant temperature, tachometer (engine rpm), AdBlue® tank level

Engine and drive train diagnostics program indicator lights

Warning lights: engine ECM status, high drive train oil temperature, low coolant level, low engine oil pressure, high coolant temperature, low fuel level, high exhaust system temperature, AdBlue® tank low level, battery charge level, low transmission/clutch oil pressure

Warning lights - filters: air cleaner filter, exhaust system (SCR) filter, fan drive system filter, hydraulic oil filters, drive train pressure filter

Audible alarm for low coolant level, low engine oil pressure, high coolant temperature

ELECTRICAL

Alarm, back-up

Dual batteries 12 V, 960 CCA, cold start, maintenance free

Horn, electric

Lights for cab, 2 front, 2 rear

Lights with guards, 2 front - lift cylinders mounted, 2 rear - fuel tank mounted

Receptacle, starting/charging plug

Starting, 24 V

TD-20 M Extra: Alternator 50 A

Starting aid - air grid heater

TD-20 R Extra: Alternator 110 A

UNDERCARRIAGE (STD)




Track frame, 6 roller, 1,981 mm (78 in) gauge oscillating type, lifespan lubricated rollers and idlers

Track shoes, 560 mm (22 in), grouser type

UNDERCARRIAGE (LT)





Track frame, 7 roller, 1,981 mm (78 in) gauge, oscillating type, lifespan lubricated rollers and idlers

Track shoes, 560 mm (22 in), grouser type

UNDERCARRIAGE (LGP)





Track frame, 7 roller, 2,180 mm (86 in) gauge oscillating type, lifespan lubricated rollers and idlers

Track shoes, 864 mm (34 in), extreme clipped corner grouser type

GUARDS

Crankcase, hinged, with front pull hook, transmission, fan, radiator, sprocket rock and dirt deflector

Engine hood, solid, sloped

Engine side doors, hinged, perforated type

Final drive seal guard

Radiator guard door, two-piece, louvered, hinged

HYDRAULIC CONTROLS

3-spool valve, 1 lever with pilot operated blade control (lift/tilt), ready for ripper

OTHER STANDARD EQUIPMENT:

Diagnostic centers for power train and equipment hydraulic pressures

Drawbar, rigid

Ecological drains for engine oil, radiator coolant and hydraulic oil

Rear access platform

Manuals, parts and operator’s

TD-20 M Extra: Fuel stainer

TD-20 R Extra: Strainers, fuel and hydraulic tanks

30

OPTIONAL EQUIPMENT TD-20 M Extra /TD-20 R EXTRA

BLADE EQUIPMENT (STD & LT)

Semi-U, 7.04 m3 (9.2 yd3), complete with all blade components, includes hydraulic tilt and manual pitch or hydraulic tilt/pitch

Full-U, 8.45 m3 (11.1 yd3), complete with all blade components, includes hydraulic and manual pitch or hydraulic tilt/pitch

Angle (manual), 3.88 m3 (5.1 yd3), complete with all blade components, with or without hydraulic tilt

BLADE EQUIPMENT (LGP)

Straight, 6.03 m3 (7.9 yd3), complete with all blade components, includes hydraulic tilt and manual pitch

REAR MOUNTED EQUIPMENT (STD & LT)

Drawbar, heavy-duty, counterweight

Ripper with hydraulic pitch, multi-shank beam, with three shanks

Ripper with hydraulic pitch, single-shank beam, with shank, with hydraulic pin puller

REAR MOUNTED EQUIPMENT (LGP)

Drawbar, fixed

TRACK SHOES (STD & LT)

610 mm (24 in) shoes, clipped corner

660 mm (26 in) shoes, clipped corner


Heater/pressurizer/defroster; cab without air conditioner (A/C)

For use with cab:

• Air recirculation system with MSHA filters, heavy duty

• AM/FM CD radio

• Mirrors, 2 pcs, exterior

• Sun visors (2), additional, for side door windows

• Lights, 2 additional, ROPS mounted

Canopy ROPS/FOPS (Includes vinyl seat, operator platform covers, instrument panel guard and lights, 2 front, 2 rear.)

ROPS structure for use with sweeps (Includes vinyl seat, operator platform covers and instrument panel guard)

SCREENS

Sweeps for forestry application, front and rear. Include exhaust pipe extension with guard and guard for fuel tank and hydraulic reservoir

Screen, rear (required for winch application), for use with forestry sweeps

Screens for cab windows (front, rear, side, doors) bolted, black painted

Screens for cab lights (2 front, 2 rear), black painted

Screens for tractor lights (2 front, 2 rear)

Screens for ROPS mounted lights, (2 front)

GUARDS

Track roller guards, full length

Transmission and engine crankcase guards, heavy duty; crankcare guard with front pool hook

Engine hood, perforated

Tank guard, bolted (0.5 in plate protects fuel tank and hydraulic reservoir)

ADDITIONAL OPTIONS

TD-20M Extra: Inspection lamp, 24 V, portable, with 6 m (20’) cable

Starting/charging receptacle plug assembly

Vandalism protection for use with cab, with engine enclosures.

Vandalism protection for use with canopy ROPS/FOPS, with engine enclosures.

Maintenance tool kit, 17 items in a metal box

1,000 h maintenance package (filters)



EXPORT PACKING

Export packing, drive-on/drive-off, machine on the trailer

Export packing, drive-on/drive-off, machine on the railway wagon

SFRs

Centralized Lubricating System, for machine with or without ripper

Trimble Ready Option, factory preinstalled hydraulics, harness and brackets for the Trimble Grade Control System components

31

[email protected]

Specifications may change from time to time and this brochure may not reflect the latest specifications. Photographs in this brochure may not reflect market configuration. Please consult your dealer to confirm specifications and configurations.

Dressta encourages safe worksites. Please consult operator’s manual before use of any Dressta equipment.

DR-PB-TD14/15/20-T3/T4F-WW-A4-20022019-ENG

TD-15

Make and model Cummins B6.7

Emissions standard EPA Tier 4f/EU Stage V

Displacement 6.7 l (409 in3)

Bore and stroke 107 x 124 mm (4.21 x 4.48 in)

Gross horsepower, SAE J1995 232 hp (173 kW)

Net horsepower, SAE J1349/ISO 9249

213 hp (159 kW)

Rated rpm 2000

Max. torque 949 Nm (700 lb-ft) @ 1500 rpm

Air cleaner Cummins Filtration Direct Flow™, dry type, exhaust aspiration,

with dash-mounted electronic service indicator

Cold-starting aid intake- mounted air -inlet grid heater

Slope operation, max. angle 45 deg

ENGINETD-15

Type Suction- type variable-speed fan, hydraulically driven with perforated engine side sheets and heavy duty

louvered front grill

Engine cooling rating –37 deg C (–34 deg F)

COOLING

TD-15

ROPS ROPS (ISO 3471 - 2008)

FOPS FOPS (ISO 3449 - 2005)

OPERATOR STATION

TD-15

Type Open-center hydraulic system with variable-displacement multi-piston

pump

Pump displacement 163 l/min (43.1 gpm)

System relief pressure 17.0 MPa (2466 psi)

Control single joystick lever

Cylinders,bore and stroke lift (STD) lift (LT,WT,LGP) tilt tilt/pitch

100 x 1233.5 mm (3.94” x 48.6”)100 x 1095 mm (3.94” x 43.1”) 150 x 297.5 mm (5.9” x 11.7”)

130 x 520 mm (5.1” x 20.5”)

HYDRAULICSTD-15

Voltage 24 V

Number of batteries 2

Battery capacity 950 CCA

Alternator rating 110 A

Lights 10 total; cab mounted (2L, 2R & 2 side), 2F lift cylinders and 2R

fuel tank mounted

ELECTRICAL

TD-15CRAWLER DOZERS

EPA Tier 4f / EU Stage VSTANDARD, LT, WT, LGP*

* LT - LONG TRACK, WT - WIDE TRACK, LGP - LOW GROUND PRESSURE

TD-15 (STD & LT) TD-15 WT TD-15 LGP

Type Semi-U Angle Semi-U 6-way Straight 6-way

A Overall height - Cab 3450 mm (11 ft 4 in) 3450 mm (11 ft 4 in) 3450 mm (11 ft 4 in) 3450 mm (11 ft 4 in) 3450 mm (11 ft 4 in) 3450 mm (11 ft 4 in)

A1 Overall height - Beacon 3620 mm (12 ft 11 in) 3620 mm (12 ft 11 in) 3620 mm (12 ft 11 in) 3620 mm (12 ft 11 in) 3620 mm (12 ft 11 in) 3620 mm (12 ft 11 in)

B Grouser height 64 mm (2.52 in) 64 mm (2.52 in) 64 mm (2.52 in) 64 mm (2.52 in) 64 mm (2.52 in) 64 mm (2.52 in)

C Ground clearance 445 mm (17.5 in) 445 mm (17.5 in) 445 mm (17.5 in) 445 mm (17.5 in) 445 mm (17.5 in) 445 mm (17.5 in)

D Overall length, base machine STD 4050 mm (13 ft 3.3 in) LT 4220 mm (13 ft 10 in)

4220 mm (13 ft 10 in)

4220 mm (13 ft 10 in)

4220 mm (13 ft 10 in)

4220 mm (13 ft 10 in)

4220 mm (13 ft 10 in)

D1 Length with blade STD 5230 mm (17 ft 2 in)

LT 5670 mm (18 ft 7 in)

STD 5390 mm (17 ft 8 in),

LT 5830 mm (19 ft 2 in)

5670 (18 ft 7 in) 5870 (19 ft 3 in) 5520 (18 ft 1 in) 5870 (19 ft 3 in)

D2 Length with blade and 1-shank / 3-shank ripper

STD 6250 mm /6480 mm (20 ft 6 in /21 ft 3 in) LT 6760 mm

/6910 mm (22 ft 2 in/22 ft 8 in)

STD 6400 mm /6550 mm (21 ft

/21 ft 6 in), LT 6840 mm/6990

mm (22 ft 5 in /22 ft 11 in)

6790 mm/ 6940 mm(22 ft 3 in / 22 ft 9 in)

6880 mm / 7030 mm (22 ft 7 in / 23 ft 1 in)

E Track length on ground STD 2640 mm (104 in), LT 3050

mm (120 in)3050 mm (120 in) 3050 mm (120 in) 3050 mm (120 in) 3050 mm (120 in) 3050 mm (120 in)

F Width over track 2440 mm (96 in) 2440 mm (96 in) 2790 mm (110 in) 2790 mm (110 in) 3100 mm (122 in) 3100 mm (122 in)

F1 Width over trunnions 2810 mm (110.6 in)

2810 mm (110.6 in)

2910 mm (114.5 in)

3340 mm (131.5 in)

G Track gauge 1930 mm (76 in) 1930 mm (76 in) 2030 mm (80 in) 2030 mm (80 in) 2160 mm (85 in) 2160 mm (85 in)

MACHINE DIMENSIONS

DRESSTA

TD-15

F1

G

I

F

M

E

EDD1ED2

H

J

L

A2A A1

V

V

U S

K

O

TR

XZ

B

DRESSTADRESSTA

TD-15

2


Type Semi-U Angle Semi-U 6-way Straight 6-way

SAE capacity5.7 m3

(7.45 cu yd)3.8 m3

(5.0 cu yd)5.95 m3

(7.8 cu yd)3.8 m3

(5.0 cu yd)3.6 m3

(4.7 cu yd)4.0 m3

(5.2 cu yd)

H Blade height1460 mm (4 ft 10 in)

1120 mm (3 ft 8 in)

1460 mm (4 ft 10 in)

1360 mm (4 ft 7 in)

1100 mm (43 in) 1360 mm (53.5 in)

I Blade width3440 mm (11 ft 3 in)

4130 mm (13 ft 7 in)

3590 mm (11 ft 9 in)

3680 mm (12 ft 1 in)

3860 mm (12 ft 8 in)

3830 mm (12 ft 7 in)

J Blade lift heightSTD 1104 mm

(43.5 in), LT 1102 mm (43.4 in)

STD 1102 mm (43.4 in), LT 1119

mm (44 in)

1102 mm (43.4 in)

1280 mm (50.4 in)

1240 mm (49 in)

1280 mm (50.4 in)

K Blade angle - 25 deg - 23.5 deg - 23.5 deg

L Blade digging depth 463 mm (18.2 in)STD 552 mm (21.7 in), LT

542 mm (21.3 in)463 mm (18.2 in) 692 mm (27 in) 455 mm (18 in) 692 mm (27 in)

M Maximum tilt 742 mm (28.2 in) 385 mm (15.2 in) 782 mm (30.8 in) 450 mm (18 in) 698 mm (27.5 in) 466 mm (18.3 in)

N Maximum blade pitch adjustment 9 deg - 9 deg 8 deg 10 deg 8 deg

O Overall width with blade angled -3750 mm(12 ft 4 in)

-STD 3330 mm

(10 ft 11 in)-

3510 mm (11 ft 6 in)

BLADE SPECS

TD-15

Type Parallelogram ripper with hydraulic pitch adjustement

Single-shank Multi-shank (3-shank)

R Maximum clearance under tip (raised) 485 mm (19 in) 455 mm (17.9 in)

S Overall beam width 1100 mm (43 in) 2230 mm (88 in)

T Slope angle (full raise) 25 deg 25 deg

U Ripping width - 2030 mm (6 ft 8 in)

V Spacing center to center - 1015 mm (3 ft 4 in)

X Maximum penetration 713 mm (28 in) 600 mm (24 in)

Penetration force 71.04 kN (15970 lb) 64 kN (14387 lb)

Pryout force 390.9 kN (87874 lb) 268.7 kN (60404 lb)

Shank positions (vertical) 2 2

Weight of ripper incl. shank(s) 1546 kg (3408 lb) 1743 kg (3843 lb)

Weight of shank 197 kg (434 lb) 94.5 kg (208 lb)

RIPPER

TD-15Refill capacities

Fuel tank 390 l (103 US gal)

Cooling system 27 l (7.1 US gal)

Engine oil 18.5 l (4.9 US gal)

Transmission system 153 l (40.4 US gal)

Final drive, each side 40 l (10.6 US gal)

Hydraulic reservoir 60 l (16 US gal)

Diesel Exhaust Fluid (DEF) tank 20 l (5.3 US gal)

SERVICEABILITY

3



Oscillation-type with equalizer bar and forward mounted pivot shafts

Oscillation-type with equalizer bar and forward mounted pivot shafts

Tracks Large deep-heat-treated, sealed, and lubricated track links and

through-hardened, sealed, and lubricated rollers for maximum wear

resistance

Large deep-heat-treated, sealed, and lubricated track links and


resistance

Large deep-heat-treated, sealed, and lubricated track links and


resistance

Track gauge 1930 mm (76 in) 2030 mm (80 in) 2160 mm (85 in)

Track shoe width 508 mm (20 in) 762 mm (30 in) 940 mm (37 in)

Chain Sealed and lubricated Sealed and lubricated Sealed and lubricated

Shoes, each side STD 39 LT 43 43 43

Track rollers, each side STD 6 LT 8 8 8

Track length on ground STD 2640 mm (104 in) LT 3050 mm (120 in)

3050 mm (120 in) 3050 mm (120 in)

Ground contact area STD 27000 cm2 (4160 in2) LT 31000 cm2 (4800 in2)

46000 cm2 (7200 in2) 57000 cm2 (8880 in2)

Ground pressure STD 75.4 kPa (10.9 psi) LT 66.2 kPa (9.6 psi)

45.7 kPa (6.7 psi) 37.4 kPa (5.5 psi)

Track pitch 215.9 mm (8.5 in) 215.9 mm (8.5 in) 215.9 mm (8.5 in)

Sprocket sements, each side 1 1 1

UNDERCARRIAGE


Base Weight with Semi-U blade w/tilt, drawbar, standard equipment, Cab ROPS/FOPS, full fuel tank, and 79-kg (175 lb) operator

STD 20760kg (45768 lb) LT 20910kg (46099 lb)

21415 kg (47212 lb) 21720 kg (47884 lb)

Optional components

Ripper

Single-shank type + 1605 kg (3538 lb)

3-shank type + 1743 kg (3843 lb)

Track shoes

508 mm (20 in) - -877 kg (1933 lb)

560 mm (22 in) + 125 kg (276 lb) -740 kg (1631 lb)

610 mm (24 in) + 265 kg (584 lb) -585 kg (1290 lb)

660 mm (26 in) + 406 kg (895 lb) -430 kg (948 lb) -1100 kg (2425 lb)

OPERATING WEIGHTS

4

TD-15

Transmission Single stage 370 mm (14.6 in) torque converter with a 2:3:1 stall ratio drives to transmission through a double universal joint. Modular, countershaft type power shift transmission, electro-hydraulic control. Preset travel speed and auto-downshift

Steering Exclusive 2-speed geared steering module provides gradual turns while maintaining full power to both tracks plus conventional clutch-brake performance for tight or pivot turns. Coupled to 3-speed transmission, the 2-speed steering provides 6 speeds forward and 6 reverse. The left hand joystick controls transmission and steering drive for up and down shifting, steering, Hi/Lo selection and LH/RH gradual turn.

Final drives Double-reduction final drives mounted independently of track frames and dozer push arms for isolation from shock loads

Total ratio 12.1 to 1

Travel speeds

Gear Range Forward Reverse

km/h (mph) km/h (mph)

1st Low 2.8 (1.7) 3.3 (2.1)

High 3.8 (2.4) 4.5 (2.8)

2nd Low 5.0 (3.1) 6.0 (3.7)

High 6.7 (4.2) 8.0 (5.0)

3rd Low 8.0 (5.0) 9.3 (5.8)

High 10.5 (6.5) 12.3 (7.6)

POWERTRAIN

Maximum drawbar pull

535.3 kN (118,688 lb)

Drawbar Pull - Speed 1 kN (lbf ) 535.3 (118688) - 1st Low

Drawbar Pull - Speed 1 '000 kgf ('000 lbf) 54.58 (118.68) - 1st Low

Drawbar Pull - Speed 2 kN (lbf) 390.0 (87675) - 1st High

Drawbar Pull - Speed 2 '000 kgf ('000 lbf) 39.77 (87.65) - 1st High

Drawbar Pull - Speed 3 kN (lbf) 283.5 (63733) - 2nd Low

Drawbar Pull - Speed 3 '000 kgf ('000 lbf) 28.91 (63.73) - 2nd Low

Drawbar Pull - Speed 4 kN (lbf) 199.6 (48872) - 2nd High

Drawbar Pull - Speed 4 '000 kgf ('000 lbf) 20.35 (48.87) - 2nd High

Drawbar Pull - Speed 5 kN (lbf) `

Drawbar Pull - Speed 5 '000 kgf ('000 lbf) 16.55 (36.48) - 3rd Low

Drawbar Pull - Speed 6 kN (lbf) 116.3 (26.145) - 3rd High

Drawbar Pull - Speed 6 '000 kgf ('000 lbf) 11.86 (26.14) - 3rd High

Brakes

Service Spring applied hydraulically released multi-disc wet brakes.Foot pedal linkage control

Parking The steering brakes also act as service and parking brakes. Service brakes are locked automatically when the transmission safety lever is actuated or when the engine is cut off.

5

STANDARD EQUIPMENT TD-15

ENGINEEngine, Cummins B6.7, Stage V, emission certified, turbocharged, High Pressure Common Rail (HPCR), Singel Module™ DPF/SCR EGR-free, Electronic Controls (ECM), 213 fwhp(159 kW)Air cleaner, Cummins Filtration Direct Flow™, dry type with precleaner, dust ejector system, exhaust aspiration and electronic service indicatorAntifreeze, -34°F (-37°C)Cooling module; includes radiator, transmission oil cooler, charge air cooler (CAC); isolation mountedCoolant filter conditionerFan, hydraulically driven blowerFilters, engine oil, full flow and by-pass with replaceable “spin-on” elementsMuffler, under engine hood, insulatedWater separator, fuel system

DRIVETRAINTorque converter, single stageTransmission, power shift, 3 speeds forward, 3 reverse, combined with 2 speed steering provides 6 speeds forward, 6 reverse, preset travel speed selection and auto-downshiftSteering, planetary type, 2 speed, left hand single lever control (joystick)

OPERATOR’S ENVIRONMENTAir conditioner/heater/pressurizer/defroster, behind roof mountedAM/FM radio with USB socketCab, ROPS/FOPS integrated, sound suppression, 4 wipers w/washers, inside mirror, dome light, tinted safety glass, 2 sliding side windows and air recirculation system (approved according to ROPS - EN ISO 3471 and FOPS - EN ISO 3449)Mirrors, 2 pcs, exteriorArm restsSeat belt (EN ISO 6683) - 3” wide, retactableSun visor for front cab windowFire extinguisher

INSTRUMENTATIONElectronic Monitoring System, LCD display:Normal and diagnostic operating modes for engine and drive train, houmeter, gear, rangeGauges: voltmeter (battery charge), drive train oil temperature, fuel level, coolant temperature, tachometer (engine rpm), AdBlue® tank levelEngine and drive train diagnostics program indicator lightsEngine intake air heating (grid heater) indicator lightWarning lights: engine ECM status, high drive train oil temperature, low coolant level, low engine oil pressure, high coolant temperature, low fuel level, high exhaust system temperature, AdBlue® tank low level, battery charge level, low transmission/clutch oil pressureWarning lights - filters: air cleaner filter, exhaust system (SCR) filter, fan drive system filter, hydraulic oil filters, drive train pressure filterAudible alarm for low coolant level, low engine oil pressure, high coolant temperature

ELECTRICALAlarm, back-upAlternator 110 ADual batteries 12 V, 950 CCA, cold start, maintenance freeHorn, electricLights for cab, 2 left, 2 right, LEDLights with guards, 2 front - lift cylinders mounted, 2 rear - fuel tank mountedReceptacle, starting/charging plugStarting, 24 VStarting aid - air grid heater

GUARDSCrankcase, hinged, with front pull hook, transmission, fan, radiator, sprocket rock and dirt deflectorEngine hood, solid, slopedEngine side doors, hinged, perforated typeFinal drive seal guardRadiator guard door, louvered, hinged

UNDERCARRIAGE (STD)Track adjusters, hydraulicTrack chain, sealed and lubricated (LTS) with split master link, 43 linksTrack chain end guides, integralTrack frame, 6 roller, 1930 mm (76”) gauge, oscillating type, lifespan lubricated rollers and idlersTrack shoes, 508 mm (20”) severe service

UNDERCARRIAGE (LT)Track adjusters, hydraulicTrack chain, sealed and lubricated (LTS) with split master link, 39 linksTrack chain center guidesTrack chain end guides, integralTrack frame, 8 roller, 1930 mm (76”) gauge, oscillating type, lifespan lubricated rollers and idlersTrack shoes, 508 mm (20”) severe service

UNDERCARRIAGE (WT)Track adjusters, hydraulicTrack chain, sealed and lubricated (LTS) with split master link, 43 linksTrack chain center guidesTrack chain end guides, integralTrack frame, 8 roller, 2030 mm (80”) gauge, oscillating type, lifespan lubricated rollers and idlersTrack shoes, 762 mm (30”) severe service

UNDERCARRIAGE (LGP)Track adjusters, hydraulicTrack chain, sealed and lubricated (LTS) with split master link, 43 linksTrack chain center guidesTrack chain end guides, integralTrack frame, 8 roller, 2160 mm (85”) gauge, oscillating type, lifespan lubricated rollers and idlersTrack shoes, 940 mm (37”) extreme clipped corner with bolt holes for 3rd rail track

HYDRAULIC CONTROLS3-spool valve, 1 lever with pilot operated blade control (lift/tilt), ready for ripper

OTHER STANDARD EQUIPMENTDiagnostic centers for power train and equipment hydraulic pressuresEcological drains for engine oil, radiator coolant and hydraulic oilFilters, power train, equipment hydraulics, fuelHitch, retrievalManuals, parts and operator’sMaintenance tool kit (includes grease gun)Rear access platformRear view camera with displayTools compartmentVandalism protection, one key for all locks

6

OPTIONAL EQUIPMENT TD-15

BLADE EQUIPMENT (STD & LT)Semi-U, 5.70 m³ (7.45 yd³), complete with all blade components, includes hydraulic tilt and manual pitch or hydraulic tilt/pitchAngle (manual angle), 3.8 m³ (5.0 yd³), complete with all blade components, includes heavy duty struts, with or without hydraulic tilt

BLADE EQUIPMENT (WT)Semi-U, 5.95 m³ (7.78 yd³), complete with all blade components, includes hydraulic tilt and manual pitch or hydraulic tilt/pitchAngle (6-way), 3.8 m³(5.0 yd³), full hydraulic, inside arm with hydraulic tilt and angle and manual pitch, complete with all blade components and steps on track frame

BLADE EQUIPMENT (LGP)Straight, 3.6 m³ (4.7 yd³), complete with all blade components, includes hydraulic tilt and manual pitchAngle (6-way), 4.0 m³ (5.2 yd³), full hydraulic, inside arm with hydraulic tilt and angle and manual pitch, complete with all blade components and steps on track frame

REAR MOUNTED EQUIPMENT (STD & LT)(WT)Fixed drawbarReplaces the standard retrieval hitchRipper, multi-shank beam, with three shanks, partially mounted, includes deduct for standard hitchRipper, single-shank beam, with shank, partially mounted, includes deduct for standard hitch

REAR MOUNTED EQUIPMENT (LGP)Fixed drawbar

TRACK SHOES (STD)560 mm (22”) shoes, severe service610 mm (24”) shoes, severe service660 mm (26”) shoes, severe service

TRACK SHOES (WT)508 mm (20”) shoes, square corner, severe service560 mm (22”) shoes, square corner, severe service610 mm (24”) shoes, square corner, severe service660 mm (26”) shoes, square corner, severe service

TRACK SHOES (LT)560 mm (22”) shoes, square corner, severe service610 mm (24”) shoes, square corner, severe service660 mm (26”) shoes, square corner, severe service

TRACK SHOES (LGP)660 mm (26”) shoes, square corner, severe serviceStd 940 mm (37”) shoes with third rail track system (adds half chain assembly to outer ends of 37” shoes)

OPERATOR’S ENVIRONMENTFor use with cab:• Air recirculation system with MSHA filters, severe service• Seat, air suspension type, fabric cover, adjustable (includes empty seat sensor and belt sensor)• Sun visors (2), additional, for side door windows• Additional cab lights, 2 front, LED

GUARDSEngine hood, perforatedFinal drive rock guardTrack roller guard, full lengthTransmission and engine crankcase guards, severe service crankcase guard with front pull hookTank guard, bolted (0.5” plate protects fuel tank and hydraulic reservoir)

SCREENSSweeps, forestry, front and rear, for standard cab with ROPS or open ROPS machine; include exhaust pipe extension with guard and guard for fuel tank and hydraulic reservoirScreen, rear (required for winch application), for use with forestry sweepsScreens for all cab windows (front, rear, side, doors) bolted, black paintedScreens for cab lights (2 front, 2 rear & 2 side), black paintedScreens for tractor lights (2 front, 2 rear)

ADDITIONAL OPTIONSInspection lamp, 12 V, portable, with cableSound suppression package, for use with std solid hood or with perforated hood, includes sound suppressed radiator guard doorsStarting/charging receptacle plug assembly (required to jump-start or charge batteries)Vandalism protection for use with engine enclosures1000 h maintenance package (filters)1500 h maintenance package (filters)2000 h maintenance package (filters)

EXPORT PACKINGExport packing, drive on / drive off, machine on the trailerExport packing, drive on / drive off, machine on the railway wagon

SFRsCentralized Lubricating System for machine with or without ripper

7

DR-SP-TD15-T4F-A4-14032019-ENG

[email protected]

Specifications may change from time to time and this brochure may not reflect the latest specifications. Photographs in this brochure may not reflect market configuration. Please consult your dealer to confirm specifications and configurations.

Dressta encourages safe worksites. Please consult operator’s manual before use of any Dressta equipment.

At Dressta we take pride in innovating to help our customers to achieve more in the jobs they do.

Our dedicated team of application engineers can customize designs, modify standard equipment and adapt attachments for peak performance in specific application tasks, improving productivity and bottom line results.

Do you have a Special Feature Request? See how Dressta can help you achieve more in the jobs you do.

Date post:	30-Apr-2020
Category:	Documents
Upload:	others
View:	30 times
Download:	0 times

TD-14 TD-15 TD-20 - Dressta€¦ · TD-14 TD-15 TD-20 MID-SIZE CRAWLER DOZERS . When your business...

Documents