T u r n i n g Y o u r A ss e ts i n t o D o ll a r s Public Auction PLANT CLOSED EVERYTHING MUST SELL! Asset Sales, Inc. Corporate Headquarters 301 Post Office Drive, Suite C Indian Trail, NC 28079 Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]European Headquarters 6 Hill End Close, Norwood Green Halifax, West Yorkshire, HX3 8RH Tel / Fax 07836.347880 [email protected]PLANT CLOSED SSM DOWNHOLE TOOLS, INC. LATE MODEL CNC MACHINE TOOLS & EQUIPMENT FROM AN OILFIELD MFG. 7037 ELTON COURT - CASPER, WY 82604 TUESDAY, JANUARY 30TH @ 10:00 A.M. MST Inspection: Monday, January 29th, From 8:00 A.M. - 4:00 P.M. MST NOV TORQUEMASTER 1689 HYDRAULIC BREAKOUT MACHINE OKUMA LB45II C2000 HOLLOW SPINDLE CNC TURNING CENTER KINGSTON CK3000 HOLLOW SPINDLE OIL FIELD CNC FLAT BED LATHE DOOSAN PUMA 300LC CNC TURNING CENTER 2010 2011 12" BORE 10.5" BORE 2009 INSTL NEW 2015
Transcript
Turn
ing Your Assets into Dollars
Public AuctionPLANT
CLOSED
EVERYTHINGMUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Inspection: Monday, January 29th, From 8:00 A.M. - 4:00 P.M. MST
NOV TORQUEMASTER 1689 HYDRAULIC BREAKOUT MACHINEOKUMA LB45II C2000 HOLLOW SPINDLE CNC TURNING CENTER
KINGSTON CK3000 HOLLOW SPINDLE OIL FIELD CNC FLAT BED LATHE
DOOSAN PUMA 300LC CNC TURNING CENTER
2010 2011
12"BORE
10.5"BORE 2009
INSTLNEW2015
MACHINERY INSPECTION DATE & TIME – MONDAY, JANUARY 29TH FROM 8:00 A.M. - 4:00 P.M. MST
2
ATTENDING THE AUCTION IN PERSON?
What you need to bring.....• Your Driver’s License
• Business Card• Tax Exempt Form if Non Taxable
• Bank Letter of Guarantee if Paying via Company Check
OKUMA LB45II C2000 HOLLOW SPINDLE CNC TURNING CENTER
LARGE BORE & CNC TURNING CENTERS
OKUMA Model LB45II C2000 Hollow Spindle CNC Turn-ing Center with Dual Front & Rear 24” 4-Jaw Chucks, 10.5” Thru-Hole, 86” Centers to Tailstock, 12 Station Turret, Chip Conveyor, OKUMA OSP-P300L CNC Pendant Con-trol with Remote Pulse Generator, Approx. 30 Run Hours, sn:180478, mfg.9/2014, Installed NEW 2015
APPROX30 RUNHOURS
INSTLNEW2015
AUCTION SALE DATE & TIME – TUESDAY, JANUARY 30TH @ 10:00 A.M. MST
3
KINGSTON CK3000 HOLLOW SPINDLE OIL FIELD CNC FLAT BED LATHE
2010
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location
or Can Arrange for a Third Party Logistics Firm to Manage the Removal Process for Them.
LARGE BORE & CNC TURNING CENTERS (continued)
KINGSTON Model CK3000 Hollow Spindle Oil Field CNC Flat Bed Lathe with Double Front & Back 24” 4-Jaw Chucks, 12-1/2” Thru-Hole, 31” Swing x Ap-prox. 140” Centers, 8 Position Turret Front & Rear Chip Conveyors, 30KW, 3 Point Roller Steady Rest & FANUC Oi-TD CNC Control with Remote Pulse Gen-erator, sn:30K9802250, mfg.2010
MACHINERY INSPECTION DATE & TIME – MONDAY, JANUARY 29TH FROM 8:00 A.M. - 4:00 P.M. MST
4
DOOSAN PUMA 300LC CNC TURNING CENTER
2011
Want to Join Our Mailing List? Want to be Included in Email Blast announcing Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines and Tooling Featured in an Upcoming Auction? Want to Request a Brochure? Email Us at [email protected] or Fax a Request to (704) 821-4325!
LARGE BORE & CNC TURNING CENTERS (continued)DOOSAN Puma Model 300LC CNC Turning Center with 12” 3-Jaw Power Chuck, Approx. 55” Max. Distance to Tailstock, 12 Position Turret, 4” Base, Tool Presetter, Chip Conveyor, FANUC I Series CNC Control, sn:P30L3566, mfg.2011
AUCTION SALE DATE & TIME – TUESDAY, JANUARY 30TH @ 10:00 A.M. MST
5
FLAT BED LATHE
HYDRAULIC BREAKOUT MACHINENOV TORQUEMASTER Model 1689 Hydraulic Breakout Machine with 12” Diameter, Hydraulic Push/Pull Cylinder Approx. 21’ OA Length, Control Cabinet, Hydraulic Steady Rest Support Jacks, Spindle Cylinder Rotation, Headstock / Tailstock, Clamp / Unclamp, sn:1689-569, Approx. mfg. 2009
NOV TORQUEMASTER HYDRAULIC BREAKOUT MACHINE
Can’t Attend the Sale? Still Want to Bid? Visit Our Website at www.asset-sales.com For More Bidding Options. Check Out Our Upcoming Auction Calendar!
You Can Also Sign Up to Receive Email Notifications by Joining Our Mailing List!
2009
MACHINERY INSPECTION DATE & TIME – MONDAY, JANUARY 29TH FROM 8:00 A.M. - 4:00 P.M. MST
6
VERTICAL MILLING MACHINE
ACER E-Mill Model FVS-5VK Vertical Milling Machine with Variable Speeds to 3750 RPM, R-8, 10” x 50” Power Feed Table, Power Feed Infeed & Knee, Maxi Torque-Rite Power Drawbar, NEWALL 2-Axis D.R.O., sn:N12010016, mfg.2012
HORIZONTAL BANDSAWCOSEN Model SH-500M Mitre Cutting Horizontal Bandsaw 11” x 11” Sq., 11” x 19” Rectangle, 13” Rounds, Mitres to 60 ,̊ Hyd. Vise, Discharge Table, Variable Blade Speeds, sn:SH1002088, mfg.10/2011
MUD PUMPS, MOTORS & PARTS
Large Assortment of New Mud Motor Inventory Inculding: 3-1/2" to 6-3/4" Mud Motors (Straight & Fixed Bent), Dyna Drill Rotors & Stators, Bearing Assembly & Power Secitons, Etc.
ASSORTED MUD PUMPS, MOTORS & PARTS
COSEN SH-500M MITRE CUTTING HORIZONTAL BANDSAW
ACER E-MILL FVS-5VK VERTICAL MILLING MACHINE
2011
2012
Download a lot book at www.asset-sales.com
Turn
ing Your Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – North Carolina License #6625 * 6003
DIRECTIONS: From Casper Natrona County International AirportExit Airport to turn left onto US-20 E / US-26 E for 1.7 miles. Turn right onto 6N Rd for .5 miles. Turn left onto W. Derick Drive. Continue onto N Derrick Drive. Turn left onto Elton Ct. Plant is at the end of the drive. Follow auction signs.
HOTELSHAMPTON INN & SUITES CASPER 1100 N. Poplar St. - Casper, WY 82601 (307) 235-6668
HILTON GARDEN INN CASPER 1150 N. Poplar St. - Casper, WY 82601 (307) 266-1300
PRIVATE SALECOMPLETELY RENOVATED CAPE
CANAVERAL CONDO Ocean Front Furnished 2
Bedroom Condo, Swimming Pool, Jacuzzi, Work Out Room, Garage, Tennis Courts, Quiet
But Near Everything! Priced at $450,000
Call 704-905-0341 for More Information
PUBLIC AUCTIONPLANT CLOSED
SSM DOWNHOLE TOOLS INC.LATE MODEL CNC MACHINE TOOLS & EQUIPMENT
FROM AN OILFIELD MANUFACTURERCASPER, WY
TUESDAY, JANUARY 30TH @ 10:00 A.M. MST
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes. Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
PresortedFirst Class Mail
U.S. PostagePAID
Kokomo, INPermit No. 154
REAL ESTATE FOR SALE• 2,400 Square Foot of Office Space• 11,203 of Shop Space• 5 Ton Crane
• Fire Suppression & Loading Dock• 1.18 Acres * Zoned Industrial• Located in Westgate Parking Lot 5
CALL ASSET SALES FOR MORE INFORMATION, (888) 800-4442
