TE Connectivity Rectangular DC jack

• Application: (Portable) Electronic devices:

• Double contacts (power and ground) enhance reliability

• Louvre contacts in receptacle provide max power transmission

• Plug detection contact allows for electrical switching• Power: 7A or 10.7A• Voltage: 25 V max• Durability: 5,000 cycles

Introduction

2

Features

3

Plug side

Rec side

Detectcontact

4 contact points enhance reliabilityand current capacity

Groundcontact

Power contact

Power contactPower contact

Detectcontact

Features

4

Plug side

Rec side

Mating sequence: Ground – Detect - Power

Symmetrical plug design allows for 180 deg insertion

GND Contact landing zone

Receptacle Features

5

Power

Ground connected to shell

Housing available in black and yellow

Power

Detect

Ground

Plug Features

6

Power

GroundDetect

Ground

Power

Detect

Plug and receptacle

7

cable mounted plug (10.7A, one size fits all)

Receptacle variations:• Cable mounted• DIP Type• Color Yellow/black• Solder tail length• Current

Dimensions

8

Receptacle Mounting style

9

Cable termination

Detect pin

Cable termination

Detect pin

DIP Type

Cable terminationw/o shell

Overview (partnumbers)

10

1-2129333-1 Receptacle Yellow N Cable N/A 16.2 17 6.5

1-2129333-2 Receptacle Black N Cable N/A 16.2 17 6.5

1-2129345-1 Receptacle Yellow Y DIP 1.4mm 15.1 16.2 6.5

1-2129345-2 Receptacle Yellow Y DIP 1.2mm 15.1 16.2 6.5

2-2129345-1 Receptacle Black Y DIP 1.2mm 15.1 16.2 6.5

2129516-1 Receptacle Black Y Cable N/A 16.2 15.6 6.5

1-2129458-1 Receptacle Black Y DIP 1.4mm 15.1 14.25 6.5

1-2129458-2 Receptacle Black Y DIP 1.2mm 15.1 14.25 6.5

2129567-1 Receptacle Black Y Cable N/A 15.1 17 6.5

1-2129334-1 Plug Yellow Y Cable N/A 11.9 23.7 4.65

Housing Color

Termination Type

Current Rating

PN ImageConnector

Type

7A

10.7A

Length (X)

Width (Y)

Height (Z)

DIP Solder Tail Length

Metal Shell

Non preferred pn

Sheet1

DC Jack QRG

Current RatingPNImageConnector TypeHousing ColorMetal ShellTermination TypeDIP Solder Tail LengthLength (X)Width (Y)Height (Z)

7A1-2129333-1ReceptacleYellowNCableN/A16.2176.5

1-2129333-2ReceptacleBlackNCableN/A16.2176.5

1-2129345-1ReceptacleYellowYDIP1.4mm15.116.26.5

1-2129345-2ReceptacleYellowYDIP1.2mm15.116.26.5

2-2129345-1ReceptacleBlackYDIP1.2mm15.116.26.5

2129516-1ReceptacleBlackYCableN/A16.215.66.5

10.7A1-2129458-1ReceptacleBlackYDIP1.4mm15.114.256.5

1-2129458-2ReceptacleBlackYDIP1.2mm15.114.256.5

2129567-1ReceptacleBlackYCableN/A15.1176.5

1-2129334-1PlugYellowYCableN/A11.923.74.65

Sheet2

Sheet3

Recommended PCB layout

11

Availability

All parts are available and in mass production from GuangdongCustomization can be discussed if needed (keying)

12

13

© 2015 TE Connectivity Ltd. family of companies. All Rights Reserved.

TE Connectivity, TE, TE connectivity (logo), and EVERY CONNECTION COUNTS are trademarks of the TE Connectivity Ltd. Family of companies. Other products, logos and company names mentioned herein may be trademarks of their respective owners.

While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIESREGARDING THE INFORMATION CONTAINED HEREIN, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event will TE be liable for any direct, indirect, incidental, special or consequential damages arising from or related to recipient’s use of the information. It is the sole responsibility of recipient of this information to verify the results of this information using their engineering and product environment. Recipient assumes any and all risks associated with the use of the information.

TE Connectivity Rectangular DC jackIntroductionFeaturesFeaturesReceptacle FeaturesPlug FeaturesPlug and receptacleDimensionsReceptacle Mounting styleOverview (partnumbers)Recommended PCB layoutAvailabilitySlide Number 13