Ribbon CableInterconnect Solutions
TE
Connectiv
ityC
ata
log
82012
Revise
d4-12
te.com
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
82012 LUG Printer ?M 04/2012
TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
Rib
bon
Cable
Inte
rconnectSolu
tions
2Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Connector Selection Guide
Ribbon Cable Interconnect Solutions
Male-on-Wire215083 Series,
Page 12
Mates to .50" x .50"Micro-MaTch
Female Top Entry,215079 Series,PCB Connector
Page 8
.050" [1.27 mm]Cable Pitch
Male-on-Wire215083 Series,
Page 12
Mates to .050" x .050"Micro-MaTch
Female Side Entry,215460 Series,PCB Connector
Page 9
Male-on-Wire215083 Series,
Page 12
Mates to .050" x .050"Micro-MaTch
Female Top EntrySMD, 188275 Series,
PCB ConnectorPage 10
50/50 GridReceptacle
Connector with orwithout latch
50/50 GridReceptacleConnectors
without latch
Mates to 50" x 50"Right-Angle
Headers
Mates to 50" x 50"Vertical Headers
Paddle BoardConnector,
215570 Series,Page 13
Solders directly to2.54mm x 1.27mmStaggered 2 rowPCB Footprint
.050" [1.27 mm]Cable Pitch
(Continued)
System 50ReceptaclesPages 8-11
Mates to .050" x .100"2-Row Pin Header
GridPages 10 and 11
Ultra ATA BusReceptaclesPages 13-15
Mates to .100" x .100"2-Row Pin Header
GridPage 15
Solders to.075" x .100"
4-Row PCB Layout
.025" [0.64 mm]Cable Pitch
Mates to .078" [2 mm]x .078" [2 mm]
2-Row Pin HeaderGrid
See 5176264, 5178751 Series and Part Number 1775109
(Not in this Catalog)
.039" [1.00 mm]Cable Pitch
2 mmReceptacleConnectors
Pages 16 and 17
System 50Paddleboard
Page 12
RibbonCa
bleCo
nnectorS
electio
nGuide
3Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Connector Selection Guide (Continued)
Ribbon Cable Interconnect Solutions
Universal I/OPin ConnectorsPages 45 and 46
Mates to .100" x .100"Novo Type FemaleSocket Connector
Pages 48-51
EUROLATCHReceptacles
Page 47
Mates to .100" x .100"3-Row Eurocard
Type C & RSee Catalog 82721
NovoConnectorsPages 48-51
622 and 636Series Female
Socket ConnectorsPages 52 and 53
Mates to .100" x .100"2-Row Universal or
Low-Profile HeadersPages 75-96
609 SeriesFemale
Socket ConnectorsPages 54 and 55
.050" [1.27 mm]Cable Pitch
(Continued)
.100" x .300"Footprint
.100" x .100"Footprint
Mates to2-Row DIP Socketsor Solders to PCB
.100" x .600"Footprint
622 and636 SeriesDIP PlugsPage 57
609 SeriesDIP PlugsPage 56
DIP PlugsPage 58
TE ConnectivityTE ConnectivityDIP PlugsPage 59
TE ConnectivityDIP PlugsPage 60
SolderTransition
ConnectorsPage 61
Solders to.050" x .100"
4-Row PCB Footprint
.050" [1.27 mm]Cable Pitch
(Continued)
Ribbon
CableConnectorSelection
Guide
4Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Introduction
Ribbon Cable Interconnect Solutions
Restriction on the use of Hazardous Substances(RoHS)At TE Connectivity, we’re ready to support your RoHS require-ments. We’ve assessed more than 1.5 million end items/com-ponents for RoHS compliance, and issued new part numberswhere any change was required to eliminate the restricted mate-rials. Part numbers in this catalog are identified as:RoHS Compliant —Part numbers in this catalog are RoHSCompliant, unless marked otherwise. These products complywith European Union Directive 2002/95/EC as amended 1January 2006 that restricts the use of lead, mercury, cadmium,hexavalent chromium, PBB, and PBDE in certain electrical andelectronic products sold into the EU as of 1 July 2006.NOTE: For purposes of this Catalog, included within the defini-tion of RoHS Compliant are products that are clearly “Out ofScope” of the RoHS Directive such as hand tools and othernon-electrical accessories.NOTE: Information regarding RoHS compliance is providedbased on reasonable inquiry of our suppliers and represents ourcurrent actual knowledge based on the information provided byour suppliers. This information is subject to change. For latestcompliance status, refer to our website referenced at right.
Getting the Information You NeedOur comprehensive on-line RoHS Customer Support Centerprovides a forum to answer your questions and support yourRoHS needs. A RoHS FAQ (Frequently Asked Questions) isavailable with links to more detailed information. You can alsosubmit RoHS questions and receive a response within 24 hoursduring a normal work week. The Support Center also provides:� Cross-Reference from
Non-compliant to Compliant Products� Ability to browse RoHS
Compliant Products in ouron-line catalog
� Downloadable Technical DataCustomer InformationPresentation
� More detailed informationregarding the definitionsused above
� So whatever your questions when it comes to RoHS, wehave the answers at www.te.com/leadfree
RoHSCustomerSupportCenter
DisclaimerWhile TE has made every reasonableeffort to ensure the accuracy of theinformation in this catalog, TE doesnot guarantee that it is error-free, nordoes TE make any other representation,warranty or guarantee that the informa-tion is accurate, correct, reliable orcurrent. TE reserves the right to makeany adjustments to the informationcontained herein at any time withoutnotice. TE expressly disclaims all impliedwarranties regarding the informationcontained herein, including, but notlimited to, any implied warranties ofmerchantability or fitness for a particularpurpose. The dimensions in this catalogare for reference purposes only andare subject to change without notice.Specifications are subject to changewithout notice. Consult TE for the latestdimensions and design specifications.© 2012, 2009, 1999, 1998, 1996, 1995,1993, 1992, 1989, 1988, 1986, 1985,1983, 1982, 1977, 1976, 1974 and 1973Tyco Electronics Corporation.All Rights Reserved.AMP, AMPLIMITE, AMPMODU, CHAMP,EUROLATCH, TE Connectivity and theTE connectivity (logo) are trademarksof the TE Connectivity Ltd. family ofcompanies.Other logos, product and Companynames mentioned herein may betrademarks of their respective owners.
5Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Introduction (Continued)
Ribbon Cable Interconnect Solutions
Mass termination capabili-ties of the ribbon cableconnectors have helpedmake ribbon cable, andparticularly .050 [0.127]centerline cable, popularwithin the ElectronicsIndustry. The ability to termi-nate up to 64 conductorssimultaneously, withoutstripping or otherwise pre-paring the cable, presentsobvious labor savings.
Ribbon Cable Connectorsare wire-to-board devicesused to make the transitionbetween cable and pcboard circuitry. They findheavy use within equipmentto connect one board toanother or one subsystemto another. The connectorsare also used in input/out-put applications, connectingdifferent pieces of equipment.
Ribbon Cable Solutions areavailable on three separatecable centerline spacings.They include:
.025 [0.64] Centerlines� System 50 receptacles� System 50 paddleboards� Pin headers
.039 [1.00] Centerlines� 2.0 mm receptacles� Breakaway pin headers
.050 [1.27] Centerlines� 50/50 Grid connectors� Micro-MaTch connectors� Novo Receptacleconnectors
� DIP plugs� EUROLATCH receptacleconnectors per DIN41612 and IEC 603-2
� Pin Headers
System 50 ribbon cablereceptacles will terminatecable on .025 [0.64] center-lines. They are available inselect sizes from 20 thru100-positions, and acceptwire size range 30 AWG[0.05 mm2] solid orstranded wire and 32 AWG[0.03 mm2] stranded pvcinsulated wire. Housing andcover are made of high tem-perature tolerant thermo-plastic material, black, UL94V-0 rated. A single matingbeam, phosphor bronzecontact provides the inter-connect between the con-
ductor and the .0152 [0.382]posts on .050 x .100 [1.27 x2.54] grid. Also available inpaddleboard configurations.
2.0 mm [.079] ribboncable receptacles featurecontacts on a true 2.0 mm[.079 in.] mating grid for1.0 mm [.039 in.] pitchribbon cable. Selectconfigurations are availablebetween 8 and 50-positions.Receptacles featureinsulation displacementcontacts (IDC).
50/50 Grid connectorsAlthough AMPMODU 50/50Grid Vertical Headers andReceptacles are designedfor parallel board-to-boardstacking in high densityapplications, Right-angleboard-to-board and cable-to-board applications arealso possible since thevertical receptacles alsomate with non-latchingright-angle headers and thevertical headers also matewith non-latching cable con-nectors.
Micro-Match connectorsMiniaturization and the trendtowards higher density ofelectronic functions on asubstrate led to the intro-duction of Micro-MaTch. Thesystem offers a range ofboard and wire connectors,enabling a variety of wire-to-
board and board-to-boardinterconnections. Its designprevents the traditionalfailure mode in tin-platedconnections, fretting corro-sion. An additional position-ing spring in the female partabsorbs relative movementscaused by vibrations andthermal expansion betweenmale and female contacts.By preventing movementson the contact spot, a gastight connection can beguaranteed under allcircumstances.
Novo receptacles featuretwo rows of contacts on.100 x .100 [2.54 x 2.54]centers on selected sizesof 10 thru 64-positionsand mate with .025 [0.64]square or round posts. TheNovo tuning-fork contactoffers a military-approveddesign, at an affordablecost. Polarization optionsinclude military, center andmilitary, or dual bar.
DIP (Dual In-Line Package)plugs provide a permanentconnection of ribbon cableto a pc board or matingto DIP sockets. Using thesame centerline dimensionsas DIP integrated circuits,DIP plugs offer spaceefficiency and a low profileof .253 [6.43].
Need more information?
Call Technical Support atthe numbers listed below.
Technical Support is staffedwith specialists well versedin all TE products. They canprovide you with:� Technical Support� Catalogs� Technical Documents� Product Samples� TE Authorized DistributorLocations
6Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Table of Contents
Ribbon Cable Interconnect Solutions
Ribbon Cable Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
.025 [0.64] Centerline Ribbon Cable ConnectorsSystem 50 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12Cable-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12Board-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
Ultra ATA Bus Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
.039 [1.00] Centerline Ribbon Cable Connectors2 mm [.079] Receptacle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17
AMPMODU 50/50 Grid Connector SystemIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Board-to-Board Vertical Receptacles and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Board-to-Board Vertical Receptacles, Double Row, .050 x .050[1.27 x 1.27] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Board-to-Board Vertical Headers, Double Row, .050 x .050 [1.27 x 1.27] Centers . . . 21Recommended PC Board Layouts for Vertical Connectors . . . . . . . . . . . . . . . . . . . . . 22
Board-to-Board Right-Angle Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Board-to-Board Right-Angle Headers, Double Row, .050 x .050 [1.27 x 1.27]Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cable-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Cable-to-Board Receptacle Connectors, Double Row, .050 x .050 [1.27 x 1.27]Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Terminating Covers for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Application Tooling for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Technical Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Micro-MaTch Connector SystemMiniature Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30System Overview/Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Applications (3 Dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Applications (2 Dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Female-on-Board Connector, Top Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Female-on-Board Connector, Side Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Female-on-Board Connector Surface Mount Device (SMD) . . . . . . . . . . . . . . . . . . . . . 36Male-on-Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Male-on-Wire Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Paddle Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Crimp On Snap In (COSI) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43Lead Assembly and Sample Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
.050 [1.27] Centerline Ribbon Cable ConnectorsUniversal I/O Pin Connectors without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Universal I/O Pin Connectors with Slotted Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . 46EUROLATCH Receptacles 64-Position (Three-Row Housings, Two Rows Loaded) . . . . 47Novo Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-51Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . 49Center and Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . 50Dual Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series . . . 52, 53Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . 54, 55DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . . . . . . . . . . . . . . . . 56DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series . . . . . . . . . . . . . . . . . . . . . . . . 57
7Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Table of Contents (Continued)
Ribbon Cable Interconnect Solutions
.050 [1.27] Centerline Ribbon Cable Connectors (Continued)DIP Plugs, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58DIP Plugs, .100 x .300 [2.54 x 7.62] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59DIP Plugs, .100 x .600 [2.54 x 15.24] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 604-Row PCB Solder Transition Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611-Row Horizontal Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
AccessoriesFlexible Pull Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Universal I/O Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Military Polarizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Strain Relief for 622 Series DIP Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Pull Loops, Permanent (For Receptacles and Pin Connectors) . . . . . . . . . . . . . . . . . . . 66Strain Relief for Universal I/O without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Strain Relief for 609 Series (Tulip Contact) Female Socket Connectors . . . . . . . . . . . . . 67Strain Relief for Novo and Ultra ATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Strain Relief for 2 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Strain Relief for 622 and 636 Series Female Socket Connectors . . . . . . . . . . . . . . . . . . 69
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-74
Low Profile Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-83Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54]Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77
Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54]Centerlines and “Kinked” Solder Tails for PCB Retention . . . . . . . . . . . . . . . . . . . 78, 79
IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches,Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . 80, 81
IDC Low Profile Ejection Style Pin Headers, Center Polarized, .100 x .100[2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83
Universal Ejection Style Pin Headers and Pinless HeadersUniversal Ejection Style Pin Headers, Military, Center and Dual Polarized,.100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-86
Universal Ejection Style Pin Headers, ACTION PIN Contacts, Military,Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . 87, 88
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,.100 x .100 [2.54 x 2.54] Centerlines, Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . 89-91
Universal Ejection Style Pinless Headers, Military, Center and Dual Polarized,.100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 93
Universal Ejection Style Pin Headers, with PCT Housing, .100 x .100[2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) . . . . . . . . . . . . . . . . 94, 95
Latches for Ejection Style Universal Pin Headers and Pinless Headers . . . . . . . . . . . . . 96
Cable Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97, 98
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
8Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable
Ribbon Cable Interconnect Solutions
.025
[0.64]Ce
nterlin
eRibbonCa
bleCo
nnectors
System
50Ca
ble-to-Board
Connectors
The System 50 RibbonCable connector is areceptacle connector thatwill terminate ribbon cableon .025 [0.64] centerlines.It is available in select sizesfrom 10 to 100 positionsand will accommodate 30AWG [0.05 mm2] solid orstranded and 32 AWG[0.03 mm2] stranded
conductors with PVC cableinsulation.
The housing and coverare of a high temperaturetolerant thermoplastic(black) with a UL 94V-0rating. A phosphor bronzesingle mating beam contactprovides the interconnectbetween the conductor andthe .015 [0.38] square posts
on the .050 x .100[1.27 x 2.54] grid. Thecontacts are plated with30 gold duplex plating. Thelatching feature is locatedon the receptacle, not theheader, and saves boardspace and eliminates futureproblems of “latch heightcompatibility.”
Product Facts� Preassembled housing and
cover
� One-step termination
� End and daisy chaintermination
� Positive end latching ofconnector to universalheader
� Terminates 30 AWG[0.05 mm2] solid orstranded and 32 AWG[0.03 mm2] stranded.025 [0.64] centerlineribbon cable with PVCinsulation
� Connectors are RoHScompliant
� Recognized under theComponent Programof the UnderwritersLaboratories, Inc.UL File No. E28476
� Certified by theCanadian StandardsAssociation,File No. LR 7189
R
R
9Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
.025[0.64]Centerline
Ribbon
CableConnectors
System50
Cable-to-BoardConnectors
Double Row Receptacle
Material and FinishHousing— Black thermoplastic,UL 94V-0 ratedLatches— Stainless steelContacts— Phosphor bronze, plated30 microinch gold over nickel with tinin termination area
Related Product DataMateable Connectors—See AMP Catalog 82178See Part Numbers 104068 and 104069Series on pages 10 and 11Mates with Posts— .015 [0.38]square, .125 [3.18] long, on.050 x .100 [1.27 x 2.54] grid
Technical DocumentsProduct Specification108-1109Application Specification114-25029
No. of DimensionsPos. A B C D E F
Part Number
.510 .445 .225 .200 .096 .29410 12.95 11.30 5.72 5.08 2.44 7.47 2-111196-5
.610 .545 .325 .300 .146 .39414 15.49 13.84 8.26 7.62 3.71 10.01 2-111196-6
.660 .595 .375 .350 .171 .44416 16.76 15.11 9.52 8.89 4.34 11.28 2-111196-7
.760 .695 .475 .450 .221 .54420 19.30 17.65 12.07 11.43 5.61 13.82 1-111196-8
.860 .795 .575 .550 .271 .64424 20.32 20.19 14.61 13.97 6.88 16.36 2-111196-8
.910 .845 .625 .600 .296 .69426 23.11 21.46 15.88 15.24 7.52 17.63 2-111196-9
1.010 .945 .725 .700 .346 .79430 25.65 24.00 18.42 17.78 8.79 20.17 1-111196-9
1.110 1.045 .825 .800 .396 .89434 28.19 26.54 20.96 20.32 10.06 22.71 3-111196-0
1.260 1.195 .975 .950 .471 1.04440 32.00 30.35 34.54 24.13 11.96 26.52 2-111196-0
1.360 1.295 1.075 1.050 .521 1.14444 34.54 32.89 27.31 26.67 13.23 29.06 3-111196-1
1.510 1.445 1.225 1.200 .596 1.29450 38.35 36.70 31.12 30.48 15.14 32.87 2-111196-1
1.760 1.695 1.475 1.450 .721 1.54460 44.70 43.05 37.47 36.83 18.31 39.22 2-111196-2
1.860 1.795 1.575 1.550 .771 1.64464 47.24 45.59 40.00 39.37 19.58 41.76 3-111196-2
1.960 1.895 1.675 1.650 .821 1.74468 49.78 48.13 42.55 41.91 20.85 44.30 3-111196-4
2.060 1.995 1.775 1.750 .871 1.84472 52.32 50.67 45.08 44.45 22.12 46.84 2-111196-3
2.260 2.195 1.975 1.950 .971 2.04480 57.40 55.75 50.17 49.53 24.66 51.92 3-111196-3
2.760 2.695 2.475 2.450 1.221 2.544100 70.10 68.45 62.87 62.23 31.01 64.62 2-111196-4
See Application Specification for termination tooling.Note: All part numbers are RoHS compliant.
.254[6.45]
.228[5.79]
.054[1.37]
.430[10.92]
.102[2.59]
.228[5.80]
.335[8.51]
.246[6.25]
.580[14.73]Before
Termination
.198[5.03]
.100[2.54]
.100[2.54] .050
[1.27]
F
E
D
ACover
Latch
Contact
Housing
Typ.
Position #1Indicator
C
B
System 50 Cable-to-Board Connectors,.025 [0.64] Centerline Ribbon Cable (Continued)
10Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
System 50 Board-to-Board Connectors, Through-Hole Headers
Ribbon Cable Interconnect Solutions
.025
[0.64]Ce
nterlin
eRibbonCa
bleCo
nnectors
System
50Bo
ard-to-Board
Connectors
Shrouded,Double RowVertical
Material and FinishHousing— Black thermoplastic,UL 94V-0 ratedContacts— Copper alloy, plated.000030 [0.00076] gold in mating area,.000150 [0.00381] tin on solder posts,with entire contact underplated .000050[0.00127] nickel
Related Product DataMateable Receptacles— page 9
Technical DocumentsProduct Specification108-1093Application Specification114-25031
No. of Dim. PartPositions A Number
.38010 9.65 5-104068-2
.43012 10.92 5-104068-8
.48014 12.19 5-104068-9
.53016 13.46 6-104068-0
.63020 16.00 5-104068-1
.73024 18.54 6-104068-1
.78026 19.81 6-104068-2
.88030 22.35 5-104068-3
No. of Dim. PartPositions A Number
.98034 24.89 6-104068-3
1.13040 28.70 5-104068-4
1.23044 31.24 6-104068-4
1.38050 35.05 5-104068-5
1.63060 41.40 5-104068-6
1.83068 46.48 6-104068-8
1.93072 49.02 6-104068-5
2.13080 54.10 6-104068-6
2.630100 66.80 6-104068-7**Point of measurement for gold thickness.**Circuit identification feature omitted on 8, 10, 12 and 14position headers.Note: All part numbers are RoHS compliant.
.284[7.21]
.100[2.54]
.100[2.54]
.092[2.34]
.390[9.91]
A
.015[0.38]
.344[8.74]
.060[1.52]2 Plc.
.055*[1.40]
.050[1.27] Typ.
Circuit IdentificationFeature**
11Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
System 50 Board-to-Board Connectors, Through-Hole Headers (Continued)
Ribbon Cable Interconnect Solutions
.025[0.64]Centerline
Ribbon
CableConnectors
System50
Board-to-BoardConnectors
Shrouded,Double RowRight-Angle
Material and FinishHousing— Black thermoplastic,UL 94V-0 ratedContacts— Copper alloy, plated.000030 [0.00076] gold in mating area,.000150 [0.00381] tin on solder posts,with entire contact underplated .000050[0.00127] nickel
Related Product DataMateable Receptacles— page 9
Technical DocumentsProduct Specification108-1093Application Specification114-25031
Circuit IdentificationFeature**
.540[13.72]
.100[2.54]
.350[8.89]
.290[7.37]
.050[1.27]
Typ.
Note 2
Note 1
.060[1.52]2 Plc.
A
.055*[1.40]
.100[2.54]
.160 [4.06]at Post Tips
.100[2.54]at PostTips
.408[10.36]
Hold downpost
No. of Dim. PartPositions A Number
.3308 8.38 5-104069-8
.38010 9.65 5-104069-4
.63020 16.00 5-104069-1
.73024 18.54 6-104069-2
.78026 19.81 6-104069-3
.88030 22.35 5-104069-5
.98034 24.89 6-104069-4
No. of Dim. PartPositions A Number
1.13040 28.70 5-104069-6
1.38050 35.05 5-104069-2
1.63060 41.40 5-104069-7
1.83068 46.80 6-104069-8
1.93072 49.02 6-104069-6
2.13080 54.10 5-104069-3
2.630100 66.80 6-104069-7
**Point of measurement for gold thickness.**Circuit identification feature omitted on 8, 10, 12 and14 position headers.Notes: 1. Hold down posts located as shown for
16 through 100 position headers.Notes: 2. Hold down posts located as shown for
8 through 14 and 60 through 100 positionheaders.
Notes: 3. All part numbers are RoHS compliant.
12Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable
Ribbon Cable Interconnect Solutions
.025
[0.64]Ce
nterlin
eRibbonCa
bleCo
nnectors
System
50Ca
ble-to-Board
Connectors
Paddleboard
Material and FinishHousing— LCP thermoplastic,UL 94V-0 rated, blackCover— Polyester, UL 94V-0 rated,blackContacts— Phosphor bronze, plated.000100 [0.00245] min. tin over .000050[0.00127] min. nickel underplating
Technical DocumentsProduct Specification108-1109Application Specification114-25040
.024[0.61]
.118[3.00]
.040[1.02] .030
[0.76]Standoffs
(Various Locations)
B
.100[2.54]
A
.020[0.51]
.045[1.19]Ref.
.050[1.27]
No. of PCB Dimensions KinkedPos. Layout A B Legs
.436 .20010 1 11.07 5.08 5111595-1
.536 .30014 1 13.61 7.62 5111595-2
.586 .35016 2 14.88 8.89 5111595-3
.686 .45020 2 17.42 11.43 5111595-4
.786 .55024 2 19.96 13.97 5111595-5
.836 .60026 1 21.23 15.24 5111595-6
.886 .65028 2 22.50 16.51 2-5111595-0
.936 .70030 1 23.77 17.78 5111595-7
1.036 .80034 1 26.31 20.32 5111595-8
1.186 .95040 2 30.12 24.13 5111595-9
Typ..050[1.27]
Typ.
.168[4.27]
.075[1.91]
Typ.
.304[7.72]
.008[0.20]Typ.
.340[8.64]
(Unterminated)Position 1Indicator
.273[6.93]
(Terminated)
.050[1.27]
Typ.
.075[1.91]
Typ.
.304[7.72]
.031[0.79]
Typ.
Printed Circuit Board Hole Layout #1
No. of PCB Dimensions KinkedPos. Layout A B Legs
1.286 1.05044 2 32.66 26.67 1-5111595-0
1.336 1.10046 1 33.93 27.94 1-5111595-7
1.436 1.20050 1 36.47 30.48 1-5111595-1
1.686 1.45060 2 42.82 36.83 1-5111595-2
1.786 1.55064 2 45.36 39.37 1-5111595-3
1.886 1.65068 2 47.90 41.91 1-5111595-9
1.986 1.75072 2 50.44 44.45 1-5111595-4
2.186 1.95080 2 55.52 40.53 1-5111595-5
2.686 2.450100 2 68.22 62.23 1-5111595-6
See Application Specification for termination tooling.Note: All part numbers are RoHS compliant.
B.050[1.27]
Typ.
.075[1.91]
Typ.
.304[7.72]
.031[0.79]
Typ.
Printed Circuit Board Hole Layout #2
B
13Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable
Ribbon Cable Interconnect Solutions
.025[0.64]Centerline
Ribbon
CableConnectors
Ultra
ATABus
Connectors
Product Facts� IDC termination
� Backward compatible withcurrent IDE Interfaces
� Improved signal integrity:1 to 1 signal to ground ratio
� Improved crosstalk whencompared to existing IDECable Assembly
� Color coded connectorsfor “System board,” and“Master HDD” and“Slave HDD”
� Cable impedance 80 ohms
� Up to 3 connectors per cableassembly
� 15 microinches gold plating
� Recognized under theComponent Programof the UnderwritersLaboratories, Inc.UL File No. E28476
� Certified by theCanadian StandardsAssociation,File No. LR 7189
� Terminates 30 AWG solid orstranded PVC insulated 80conductor ribbon cable
R
R
Ultra ATA is the next genera-tion IDE (Integrated DriveElectronics) bus. The currentIDE bus has a maximumdata transfer rate of about16.5 MB/second. As the busspeeds and disk drive per-formances increase, thecable assembly betweenthe motherboard and harddrive becomes a limitingfactor in data transfer fromthe drive.
The Ultra ATA connectorand cable assembly fromTE provide the customerwith improved electricalperformance by creating a1:1 signal-to-ground ratio.The connector design incor-porates an IDC bus bar tocommon the 40 additionalground signals. The cable is.025" centerline PVC ribboncable. The connector is fullybackward compatible withexisting 40-position headerswith pin 20 removed onmotherboards and diskdrives.
The new connectors arecolor coded to identify:
1. system board connector2. primary or master hard
drive connector3. slave drive connector
Standard Issues
The Ultra ATA cable per-formance specification ispart of the Small FormFactor Committee No. 8049.Compaq Computer andWestern Digital are themajor sponsors of thestandard.
Contacts Available:
� 80 position IDC contactterminations
� 40 signal contacts� 40 ground terminations tospecial IDC bus bar
14Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued)
Ribbon Cable Interconnect Solutions
.025
[0.64]Ce
nterlin
eRibbonCa
bleCo
nnectors
UltraATABu
sCo
nnectors
GroundBus Bar
Max.
SignalContacts
ContactOptional Center*Polarizer Bar
Position 1 Position 1 Position 1
Cover
OddGnd
Housing
Pos. No. 1Indicator
.420[10.67]
.492[12.50]
Ref..610[15.49]
.240[6.10]
2.186[55.52]
1.90[48.26]
.100[2.54]
.100[2.54]
“System” BoardConnector
“Slave”Connector
“Master” or“Primary”Connector
Configuration A
“System” BoardConnector
“Slave”Connector
“Master” or“Primary”Connector
Configuration B
Terminated View
Color CodedConductor No. 1
Pin 34Conductor Cutper SFF-8049
Related Product DataStrain Relief — Part Number 499252-1Mateable Headers — page 15
Material & FinishHousing and Cover —Thermoplastic, UL 94 V-0 rated, colorper tableContacts — Phosphor bronze, platedgold per table on mating end, .000050[0.00127]min. tin in wire terminationarea, over .000050 [0.00127] min nickelon entire contact.
Technical DocumentsProduct Specification108-1740Application Specification114-40056See Application Specification fortermination tooling.
AccessoriesStrain Relief — page 68Keying Plug — page 64Pull Loops — page 66Pull Tabs — page 63
Circuit 20Molded Shut
*Center & Military Polarized Military PolarizedConnector Type
15µ" Gold Housing Cover 15µ" Gold Housing CoverColor Color Color Color“System” Board 1658619-2 Blue Black 1658618-2 Blue Black
“Primary” or “Master” 1658619-1 Black Black 1658618-1 Black Black“Slave” 1658619-3 Gray Black 1658618-3 Gray Black
Notes: 1. All connectors are “ODD GROUND” configuration, ie. all odd cable conductors are grounded. “EVEN GROUND” connectors are not available.See Customer Drawings for detailed electrical connection descriptions.
2. All part numbers are RoHS compliant.
15Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued)
Ribbon Cable Interconnect Solutions
.025[0.64]Centerline
Ribbon
CableConnectors
Ultra
ATABus
Connectors
Universal Headers — Pin 20 OmittedPost Housing Latch Part Contact Finish Solder Tail CommentsType Material Type Number (Plating Code) Length
Vertical Nylon or PBT Long 5111824-9 D .1102.79
Vertical Nylon or PBT Short 6489700-1 B .123 PP3.12
Legend: PP — Polarization Peg
Ultra ATACompatible Headers
Low Profile Headers — Pin 20 OmittedPost Housing Latch Part Contact Finish Solder Tail HousingType Material Type Number (Plating Code) Length Color
Vertical Nylon None 1888188-1 A .120 Black3.05
Vertical Nylon None 1888188-2 B .120 Black3.05
Vertical Nylon 6T None 2-1734161-4 C .122 Black3.10
Vertical Nylon 6T None 2-1734161-5 C .122 Blue3.10
Vertical Nylon None 1734162-2 C .110 Black2.79
Vertical Nylon None 1734162-4 C .110 Blue2.79
Plating Code A— Duplex plated, gold flash on mating surfaces, .000100 [0.00254] min. tin on solder area, with entirepost underplated .000050 [0.00127] min. nickel.Plating Code B— Duplex plated, gold flash over palladium-nickel, .000015 [0.00038] min. total on mating surfaces,.000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015[0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated.000050 [0.00127] min. nickel.Plating Code C— Gold flash over nickel underplate on entire post.Plating Code D— Duplex plated, gold flash over palladium-nickel, .000030 [0.00076] min. total on mating surfaces,.000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015[0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated.000050 [0.00127] min. nickel.
Note: All part numbers are RoHS compliant.
16Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
2.0 mm [.079] Receptacle Connectors
Ribbon Cable Interconnect Solutions
METRICDimensions are
millimeters over inches
.039
[1.00]Ce
nterlin
eRibbonCa
bleCo
nnectors
.079
[2.00]ReceptacleCo
nnectors
Product Facts� True hard metric 2.0 x 2.0
[.079 x .079] mating grid for1.0 [.039] pitch ribbon cable
� Wide selection ofconfigurations, 8-50positions
� Insulation displacement(IDC), beryllium coppercontacts, duplex platedgold-over-nickel
� Top/bottom single beamcontact orientation
� UL 94V-0 rated thermo-plastic components
� Assemblies are furnishedpreassembled withtermination covers
� Optional polarization
� Optional strain reliefavailable
� Connector assembliespackaged for ease ofhandling and protection
� Recognized under theComponent Programof the UnderwritersLaboratories, Inc.UL File No. E28476
� Certified by theCanadian StandardsAssociation,File No. LR 7189
Performance DataDurability— 150 cyclesTermination Resistance—25 milliohms max.Mating Force—1.67 N max. per contactUnmating Force—0.14 N min. per contactOperating Temperature—-65°C to +105°C
Technical DocumentsProduct Specification108-1372
Application Specification114-40038
R
R
The 2.0 [.079] receptacleconnector family featurescontacts on a true 2.0 x 2.0[.079 x .079] mating gridfor 1.0 [.039] pitch 28 AWGribbon cable. A variety ofconfigurations are availablefrom 8 through 50 positions.This small, compactconnector is finding wideacceptance throughout theelectronic industry, particu-larly in the smaller laptopand notebook type comput-ers with 63.5 [2.5] drives.Other areas of applicationinclude point-of-sale termi-nals, fax machines, photo-copiers, printers, consumerelectronics, and other com-puter peripheral equipment.
These receptacles featureinsulation displacementcontacts (IDC) with atop/bottom single-beamcontact orientation.Contacts are berylliumcopper, duplex plated0.00076 [.000030] gold
in the mating area and0.00254 [.000100] min.tin on termination end, allover 0.00127 [.000050]nickel underplating. Contactmating area is 1.54 [.061]from the face of the housingand they accept 0.50mm[.0197] round or squareposts.
Housings are made ofUL 94V-0 rated polyesterwith optional center barpolarization. Completeassemblies are furnishedpreassembled with termina-tion covers. The completeassembly presents a com-pact design only 5.2 [.203]wide over the terminationcover by 4 [.157] deep by4 [.157] wide mating end.Terminated height is 8.48[.334]. Optional strain reliefavailable. Assemblies arepackaged for ease ofhandling and protection.
17Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
METRICDimensions are
millimeters over inches
.039[1.00]Centerline
Ribbon
CableConnectors
.079[2.00]R
eceptacleConnectors
2.0 mm [.079] Receptacle Connectors,Non-Polarized and Center Polarized Bar
Material and FinishHousing and Termination Cover—UL 94V-0 rated polyester, blackContacts— Beryllium copper, duplexplated 0.00076 [.000030] min. gold onmating end, 0.00013 [.000005] min.gold on termination end, all underplated0.00127 [.000050] min. nickelNote: Accepts 0.08-0.09mm2 [28 AWG]ribbon cable, PVC insulated 1.00 [.039]pitch. See Application Specification fordetails.
Technical DocumentsProduct Specification108-1372Application Specification114-40038
Mateable Connectors — pages 9and 12, or see Application Specificationfor header requirements
AccessoriesPull Loops — page 66Keying Plugs — page 64Strain Relief — page 68
8.48[.334]
5.16[.203]
A
2.00[.079]Typ.
2.00[.079]Typ.
1.90 ± 0.05[.075 ± .002]
10.24[.403]
4.000[.1575]
B
Position Number1 Indicator
Position Number 1
Terminated View,Typical
Optional Center Polarizer Bar
1.54[.061]
5.00[.197]
No. of Dimensions Center Non-PolarizedPositions A B Polarized
8 13.18 8.41 3-111623-0 2-111626-4.519 .331
10 15.16 10.41 1-111623-8 1-111626-7.597 .410
12 17.15 12.40 3-111623-1 —.675 .488
14 19.18 14.40 1-111623-9 1-111626-8.755 .567
16 21.18 16.41 2-111623-0 2-111626-5.834 .646
20 25.17 20.40 2-111623-1 1-111626-9.991 803
22 27.18 22.40 2-111623-9 —1.070 .882
24 29.18 24.41 2-111623-7 2-111626-61.149 .961
26 31.17 26.42 2-111623-2 2-111626-71.227 1.040
30 35.18 30.40 2-111623-3 —1.385 1.197
34 39.17 34.42 2-111623-8 2-111626-01.542 1.355
40 45.19 40.41 2-111623-4 2-111626-11.779 1.591
44 49.17 44.40 2-111623-5 2-111626-21.936 1.748
50 55.17 50.39 2-111623-6 2-111626-32.172 1.984
Note: All part numbers are RoHS compliant.
18Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
AMPMODU 50/50 Grid Connector System
Ribbon Cable Interconnect Solutions
Produced under a QualityManagement Systemcertified to ISO 9001A copy of thecertificate is availableupon request.
Vertical Headers,Board-to-Board(Page 21)
Vertical Headers,Board-to-Board(Page 21)
Right-Angle Headers,Board-to-Board (Page 24)
Vertical Headers,Board-to-Board(Page 21):.250 [6.35] Stack Height.320 [8.13] Stack Height.390 [9.91] Stack Height
Vertical Receptacles,Board-to-Board(Page 20)
Vertical Receptacles,Board-to-Board(Page 20)
Receptacles,Cable-to-Board,With Latch(Page 26)
Receptacles,Cable-to-BoardWithout Latch(Page 26)
ISO
Certifie
d9001
Boar
d-to
-Boa
rdVe
rtic
alR
ecep
tacl
esan
dH
eade
rs
19Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Board-to-Board Vertical Receptacles and Headers
Ribbon Cable Interconnect Solutions
Product Facts� Surface-mount products for
parallel board-to-boardapplications, as well asright-angle board-to-boardand cable-to-boardapplications
� High density .050 x .050[1.27x1.27] centerline grid
� Three board-to-board stackheights: .250 [6.35], .320[8.13] and .390 [9.91]
� Non-protrusive metallicholddowns
� Reliable dual beamreceptacle contacts forredundant contact
� Duplex plated receptacleand post contacts; goldplated on mating areas,tin plated on tails
� Compatible with standardsurface-mount processing(VPR and IR)
� Receptacle and header allowfor drainage ofprocessing fluids
� Tape and reel packagingavailable. ContactTE for details
� Polarized header andreceptacle assemblies
� Sizes of 10, 20, 30, 40, 50,60, 70, 80 and 100 positions
� Recognized under theComponent Program ofUnderwritersLaboratories Inc.,File No. E28476
� Certified byCanadian StandardsAssociationFile No. LR7189
AMPMODU 50/50 GridVertical Headers andReceptacles are designedfor parallel board-to-boardstacking in high densityapplications.
Right-angle board-to-boardand cable-to-boardapplications are alsopossible, since the verticalreceptacles also mate withnon-latching right-angleheaders (page 24) and thevertical headers also matewith non-latching cableconnectors.
Available are double row,vertical shrouded headersand receptacles in sizesranging from 10 through100 positions (in 10 positionincrements).
Parallel board-to-boardstack heights of .250 [6.35],.320 [8.13] and .390 [9.91]are achievable by selectionof the appropriate header.The receptacle is the samefor all three stack heightheaders.
Non-protrusive metallicholddowns are designed foruse in .062 [1.57] or thicker
PC boards and allowsurface mounting to bothsides of the board. Inaddition to providingretention during processing,the holddowns are solderedduring reflow and thereforeprovidelong-term strain relief forthe solder joints.
AMPMODU 50/50 GridVertical Headers andReceptacles are designedto be compatible withstandard surface-mountprocesses; IR (infrared) andVPR (vapor phase reflow).The surface-mountconnectors have beendesigned so thatdimensioning, tolerances,referenced datums,
holddown characteristicsand packaging methodsresult in a system that iscompatible with roboticassembly.
The headers and receptaclesfeature polarization toprevent misalignment.
Three Board Stack Heights
Non-ProtrusiveMetallic Holddowns
.250±.006[6.35±0.15]
.320±.006[8.13±0.15]
.390±.006[9.91±0.15]
R
R
Board-to-BoardVertical
Receptacles
andH
eaders
20Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Receptacles, Double Row, .050 x .050[1.27 x 1.27] Centerline
Vert
ical
Rec
epta
cles
,Dou
ble
Row
Note: All part numbers are RoHS compliant.
Material and FinishHousing—Glass-filled thermoplastic,black, 94V-0 ratedContacts—Copper alloy; duplex plated.000030 [0.00076] gold in mating area,.000150 [0.00381] tin on solder tail,with entire contact underplated .000050[0.00127] nickelHolddown—Copper alloy; plated.000150 [0.00381] tin over .000050[0.00127] nickel
Related Product DataMating Headers— pages 21 and 24PC Board Layouts— page 22Performance Specifications—page 29
Technical Documents —page 29Product Specification 108-1332Application Specification114-7010Packaging— Tube or Tape and Reel
No. of DimensionReceptacle
Pos. APart Numbers
Tube Tape and Reel* No Hold Down w/Vacuum Cover10 .266 [6.75] 5-104652-1 5-147384-1 5-147413-120 .516 [13.11] 5-104652-2 5-147384-2 5-147413-330 .766 [19.46] 5-104652-3 5-147384-3 5-147413-440 1.016 [25.81] 5-104652-4 5-147384-4 —50 1.266 [32.16] 5-104652-5 5-147384-5 5-147413-260 1.516 [38.51] 5-104652-6 5-147384-6 —70 1.766 [44.86] 5-104652-7 5-147384-7 —80 2.016 [51.21] 5-104652-8 5-147384-8 —100 2.516 [63.91] 6-104652-0 5-147384-9 —
* Parts packaged in tape and reel have vacuum pick and place cover.See PC Board Layout on page 22.
Polarizing Tab(For Polarization toMating Header)
A .028[0.71]
.187[4.75]
.120[3.05]
.050[1.27]
.050[1.27]
.050[1.27]
21Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Vertical Headers, Double Row, .050 x .050[1.27 x 1.27] Centerline
VerticalHeaders,D
oubleR
ow
Note: All part numbers are RoHS compliant.
Material and FinishHousing—Glass-filled thermoplastic,black, 94V-0 ratedContacts—Copper alloy; duplex plated.000030 [0.00076] gold in mating area,.000150 [0.00381] tin on solder tail,with entire contact underplated .000050[0.00127] nickelHolddown—Copper alloy; plated.000150 [0.00381] tin over .000050[0.00127] nickel
Related Product DataMating Receptacles — pages 20 and26 (without latch only)PC Board Layouts— page 22Performance Specifications—page29
Technical Documents —page 29Product Specification 108-1332Application Specification114-7010Packaging— Tube or Tape and Reel
Header Part Numbers
No. of Dimension .250 [6.35] Mated Height .320 [8.13] Mated Height .390 [9.91] Mated HeightPos. A
TubesTape & Reel*
Tubes Tape & Reel*Tubes
Tape & Reel*Hold Down No Hold Down Hold Down No Hold Down
10 .372 [9.44] 5-104655-1 5-147381-1 5-147121-1 5-104656-1 5-147382-1 5-104693-1 — 5-147383-120 .622 [15.79] 5-104655-3 5-147381-2 5-147121-2 5-104656-2 5-147382-2 5-104693-2 — 5-147383-230 .872 [22.14] 5-104655-4 5-147381-3 — 5-104656-3 5-147382-3 5-104693-3 — 5-147383-340 1.122 [28.49] 5-104655-5 5-147381-4 — 5-104656-4 5-147382-4 5-104693-4 — 5-147383-450 1.372 [34.84] 5-104655-6 5-147381-5 — 5-104656-5 5-147382-5 5-104693-5 — 5-147383-560 1.622 [41.19] 5-104655-7 5-147381-6 — 5-104656-6 5-147382-6 5-104693-6 — 5-147383-670 1.872 [47.54] 5-104655-8 5-147381-7 — 5-104656-7 5-147382-7 5-104693-7 — 5-147383-780 2.122 [53.89] 5-104655-9 5-147381-8 — 5-104656-8 5-147382-8 5-104693-8 — 5-147383-890 2.372 [60.24] — — — 5-104656-9 — 5-104693-9 — —100 2.622 [66.59] 6-104655-1 5-147381-9 — 6-104656-0 5-147382-9 6-104693-0 5-147503-1 5-147383-9
*Parts packaged in tape and reel have vacuum pick and place cover.See PC Board Layout on page 22.
For .250 [6.35] Mated Height
For .320 [8.13] Mated Height
For .390 [9.91] Mated Height
.050[1.27]
.050[1.27]
.050[1.27]
.030[0.76]
.030[0.76]
.050[1.27]
.2255[5.728]
.225[5.71]
.2975[7.557]
.3675[9.335]
A
A
A
.030[0.76]
.050[1.27]
22Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Recommended PC Board Layouts for Vertical Connectors
Ribbon Cable Interconnect Solutions
Rec
omm
ende
dPC
Boar
dLa
yout
s
No. of Receptacle Dimensions Header DimensionsPos. B C D B C D
10 4 .200 [5.08] .320 [8.12] 4 .200 [5.08] .322 [8.17]20 9 .450 [11.43] .570 [14.48] 9 .450 [11.43] .572 [14.52]30 14 .700 [17.78] .820 [20.83] 14 .700 [17.78] .822 [20.87]40 19 .950 [24.13] 1.070 [27.19] 19 .950 [24.13] 1.072 [27.22]50 24 1.200 [30.48] 1.320 [33.53] 24 1.200 [30.48] 1.322 [33.57]60 29 1.450 [36.83] 1.570 [39.88] 29 1.450 [36.83] 1.572 [39.92]70 34 1.700 [43.18] 1.820 [46.23] 34 1.700 [43.18] 1.822 [46.27]80 39 1.950 [49.53] 2.070 [52.58] 39 1.950 [49.53] 2.072 [52.62]90 44 2.200 [55.88] 2.320 [58.93] 44 2.200 [55.88] 2.322 [58.97]100 49 2.450 [62.23] 2.570 [65.28] 49 2.450 [62.23] 2.572 [65.32]
D
D
.029[0.74]
B Spaces at .050 [1.27] = C
B Spaces at .050 [1.27] = C
C of Pattern
Detail A
Detail A
C of Pattern
.061[1.54]
.050[1.27]
.162[4.11]
.182[4.62]
.091[2.31]
.110[2.79]
.050[1.27]
.060[1.52]
.065[1.65]
.130[3.30]
.029[0.74]
L
L
Headers
Receptacles
Note: Refer to TE CustomerDrawings for additional PC boardlayout information and dimensionaltolerances.
.047[1.19]2 Plc.
.010[0.25]4 Plc.
Detail A
23Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Board-to-Board Right-Angle Headers
Ribbon Cable Interconnect Solutions
Board-to-BoardR
ight-AngleH
eaders
AMPMODU 50/50 GridRight-Angle Headers willaccommodate a variety ofhigh density packagingapplications; right-angleboard-to-board applicationswhen mated with verticalreceptacles (page 20) andright-angle cable-to-boardapplications when matedwith cable connectors(page 26). The small.050 x .050 [1.27 x 1.27]centerline contact spacingallows efficient use of thePC board area.
Mechanical support of theheaders to the PC board isprovided by non-protrusivemetallic holddownsdesigned for .062 [1.57] orthicker PC boards. Theseholddowns are of the same
design as those used in thevertical headers (page 21)and receptacles (page 20).There are also metallic tabsthat are soldered to the sur-faces of the PC board padsfor added support.
AMPMODU 50/50 GridRight-Angle Headers areavailable in double-row, ineither latching or non-latching versions, and insizes ranging from 10through 100 positions (in 10position increments). Thelatching version providespositive retention whenmated with the latchingcable connector (page 26).All headers feature polariza-tion to help prevent mis-alignment during mating.
Product Facts� Surface-mount products for
right-angle board-to-boardand cable-to-boardapplications
� Double-row, right-angleshrouded headers
� High density .050 x .050[1.27 x 1.27] centerline grid
� Latching and non-latchingversions available
� Non-protrusive metallicholddowns
� Metallic tabs, whensoldered to PC board pad,provide added mechanicalsupport
� Duplex plated post contacts;gold plated on mating area,tin plated on tails
� Compatible with standardsurface-mount processing(VPR and IR)
� Standoffs on headerhousings allow for drainageof processing fluids
� All headers are polarized� Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions� Recognized under the
Component Program ofUnderwritersLaboratories Inc.,File No. E28476
� Certified by CanadianStandardsAssociationFile No. LR7189
R
R
24Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Board-to-Board Right-Angle Headers, Double Row, .050 x .050[1.27 x 1.27] Centerline
Rig
ht-A
ngle
Hea
ders
,Dou
ble
Row
,La
tchi
ngan
dN
on-L
atch
ing
Note: All part numbers are RoHS compliant.
Material and FinishHousing — Liquid crystal polymer,black, 94V-0 ratedContacts —Copper alloy; duplexplated .000030 [0.00076] gold inmating area, .000150 [0.000381] tin onsolder tail, with entire contact under-plated .000050 [0.00127] nickelHolddown —Copper alloy; plated.0000150 [0.00381] tin over .000050[0.00127] nickel
Related Product DataMating Receptacles— pages 20and 26Performance Specifications —page 29
Technical Documents —page 29Product Specification 108-1443Application Specification114-7010Packaging —Tube
Recommended PC Board Layout
No. of DimensionsHeader
Pos.Part Numbers
A B C D Latching Non-Latching10 .630 [16.00] 9 .225 [5.72] .550 [13.97] 5-104895-1 5-104894-120 .880 [22.35] 19 .475 [12.07] .800 [20.32] 5-104895-2 5-104894-230 1.130 [28.70] 29 .725 [18.42] 1.050 [26.67] 5-104895-3 5-104894-340 1.380 [35.05] 39 .975 [24.77] 1.300 [33.02] 5-104895-4 5-104894-450 1.630 [41.40] 49 1.225 [31.12] 1.550 [39.37] 5-104895-5 5-104894-560 1.880 [47.75] 59 1.475 [37.47] 1.800 [45.72] 5-104895-6 5-104894-670 2.130 [54.10] 69 1.725 [43.82] 2.050 [52.07] 5-104895-7 5-104894-780 2.380 [60.45] 79 1.975 [50.17] 2.300 [58.42] 5-104895-8 5-104894-8100 2.880 [73.15] 99 2.475 [62.87] 2.800 [71.12] 6-104895-0 6-104894-0
A
.430[10.92]
.340[8.64]
.305[7.75]
B Spaces at.025 = C[0.64]
.085[2.16]
.140[3.56]
.175[4.45]
D
.100[2.54]Min
.063[1.57](2 Plc)
.190[4.83](2 Plc)
.047 Dia[1.19]Plated-Thru Hole(2 Plc)
.136[3.45](2 Plc)
.050[1.27]
.352[8.94]
.213[5.41]
.050[1.27]
.050[1.27]Typ.
.029[0.74]Typ
.065[1.65]Typ.
Note: Refer to TE CustomerDrawings for additional PC boardlayout information and dimensionaltolerances.
Non-Latching Header
Latching Header
25Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable-to-Board Connectors
Cable-to-BoardConnectors
Product Facts� Double-row receptacle
connectors provide cable-to-board connectioncapabilities for verticalheaders (non-latching) andright-angle headers(latching and non-latching)
� IDC (InsulationDisplacement Crimp) masstermination of solid orstranded round conductor.050 [1.27] centerlineribbon cable with PVC orpolyethylene insulation
� Accommodates ribbon cableconductor sizes of 28 AWG[0.08-0.09 mm2] and 30AWG [0.05 mm2] andinsulation diameters up to.036 [0.91] maximum
� Reliable single beamreceptacle contact design
� Duplex plated receptaclecontacts; gold plated inmating area, tin intermination area
� Terminating covers (soldseparately) provide bothstrain relief and protectionto the termination area
� Sizes of 10, 20, 30, 40, 50,60, 70, 80 and 100 positions
� Connectors available with orwithout metal latch
� Connectors without latchesare polarized to helpprevent mismating
� Recognized under theComponent Program ofUnderwritersLaboratories Inc.,File No. E28476
� Certified by CanadianStandardsAssociationFile No. LR7189
These double-row cableconnectors, with a .050 x.050 [1.27 x 1.27] centerlinecontact spacing, providecable-to-board connectioncapabilities for theAMPMODU 50/50 GridConnector System. Cableconnectors without a latchwill mate with the verticalheaders (page 21), whilecable connectors with orwithout a latch can be usedto mate with the right-angleheaders (page 24).
The cable connectorsfeature reliable single-beam IDC (insulationdisplacement crimp)contacts which are duplexplated with .000030[0.00076] gold. Thesecontacts can be massterminated to either solid or
stranded round conductorribbon cable with conductorsizes of 28 AWG [0.08-0.09mm2] and 30 AWG [0.05mm2] and a maximuminsulation diameter of .036[0.91]. During termination,the terminating covers,which must be purchasedseparately, assist in guidingthe wire into the IDCcontacts, then providestrain relief when fullyseated. Actual terminationis accomplished with the TEmanual tooling shown onpage 28.
The latching version ofthe cable connector isequipped with a metal latchwhich provides positiveretention of the receptaclecable connector whenmated with a surface-
mounted right-angle header.The cable connector withouta metal latch featurespolarization to help preventmismating. All connectorsare available in sizesranging from 10 through100 positions (in 10 positionincrements).
R
R
26Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050[1.27 x 1.27] Centerline
Rec
epta
cle
Conn
ecto
rs,D
oubl
eR
ow,
With
and
With
outL
atch
Note: All part numbers are RoHS compliant.
Material and FinishHousing — Thermoplastic, black,94V-0 ratedLatch —Stainless steelContacts —Phosphor bronze; duplexplated .000030 [0.00076] minimumgold in mating area, .000150 [0.00381]minimum tin on solder tail, with entirecontact underplated .000050 [0.00127]minimum nickel
Related Product DataMating Headers — pages 21 and 24(latching)Terminating Covers (Must bePurchased Separately, 2 Requiredper Connector) — page 27Termination Tooling — page 28Performance Specifications —page 29
Technical Documents —page 29Product Specification 108-1443Application Specification408-9817, 408-9909Packaging— Tube
A
No. of DimensionsReceptacle
Pos.Part Numbers
A B C D With Latch Without Latch10 .578 [14.68] 4 .200 [5.08] .266 [6.76] 5-104892-1 5-104893-120 .828 [21.03] 9 .450 [11.43] .516 [13.11] 5-104892-2 5-104893-230 1.078 [27.38] 14 .700 [17.78] .766 [19.46] 5-104892-3 5-104893-340 1.328 [33.73] 19 .950 [24.13] 1.016 [25.81] 5-104892-4 5-104893-450 1.578 [40.08] 24 1.200 [30.48] 1.266 [32.16] 5-104892-5 5-104893-560 1.828 [46.43] 29 1.450 [36.83] 1.516 [38.51] 5-104892-6 5-104893-670 2.078 [52.78] 34 1.700 [43.18] 1.766 [44.86] 5-104892-7 5-104893-780 2.328 [59.13] 39 1.950 [49.53] 2.016 [51.21] 5-104892-8 5-104893-8100 2.828 [71.83] 49 2.450 [62.23] 2.516 [63.91] 6-104892-0 6-104893-0
.280[7.11]
.627[15.94]
.690[17.56]
D
.120[3.05]
B Spaces at.050 [1.27] = C
.284[7.21]
.327[8.31]
.050[1.27]
.050[1.27]Typ
27Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Terminating Covers for Cable Connectors
CableConncetorTerm
inatingCover,
Double
Row
Note: All part numbers are RoHS compliant.
MaterialGlass-filled thermoplastic,black, 94V-0 rated
Related Product DataConnectors used with Covers —page 26Termination Tooling — page 28
Technical Documents —page 29Product Specification 108-1443Application Specification408-9817, 408-9909Packaging—Plastic bag
No. of Dimension Terminator CoverPos. A Part Numbers10 .565 [14.35] 104891-120 .815 [20.70] 104891-230 1.065 [27.05] 104891-340 1.315 [33.82] 104891-450 1.565 [39.75] 104891-560 1.815 [46.10] 104891-670 2.065 [52.45] 104891-780 2.315 [58.80] 104891-8100 2.815 [71.50] 1-104891-0
Note: Terminating covers must be purchased separately, two are required foreach cable connector.
.277[7.04]
.191[4.85]
A
28Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Application Tooling for Cable Connectors
IDC
(Ins
ulat
ion
Dis
plac
emen
tCri
mp)
Tool
ing
Note: All part numbers are RoHS compliant.
Manual Miniature Application Frame Assembly 91295-1with Cover Closing Kit 543518-1
The Manual MiniatureApplication FrameAssembly 91295-1,equipped with a CoverClosing Kit 543518-1, isused for the IDC termina-tion of ribbon cable to thecable connectors shown onpage 26.
Prior to termination, thecovers must be partiallyassembled onto a connec-tor housing, the cableinserted between the cov-ers and contacts and thecovers preclosed by hand,clamping the cable inplace.
In the Manual MiniatureApplication FrameAssembly, the covers arefully seated to complete themass termination and pro-vide strain relief for thecompleted connection.
For tooling information, callTechnical Support Center1-800-522-6752.
Note: Refer to TE InstructionSheets 408-9817 (Frame Assembly91295-1) and 408-9909 (CoverClosing Kit 543518-1) for completetermination/tooling information.
29Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Performance Specifications
Performance
Specifications/TechnicalD
ocuments
Note: All part numbers are RoHS compliant.
Board-to-Board Connectors, Vertical and Right-AngleMating Force— 6.4 oz (1.78 N] max. per contactUnmating Force— 1.0 oz [0.28 N] min. per contactDurability— Tested to 200 cycles min.Current Rating— (30°C T rise): .5 ampere per contactOperating Temperature Range— -65°C to +105°CTermination Resistance— 16 milliohms max. (initial)Insulation Resistance— 5000 megohms min. (initial)Dielectric Withstanding Voltage— 300 VAC
Cable-to-Board ConnectorsMating Force— 6.4 oz (1.78 N] max. per contactUnmating Force Without Latch— .5 oz [0.14 N] min. per contactDurability— Tested to 200 cycles min.Current Rating— (10°C T rise); .5 ampere per contactOperating Temperature Range— -65°C to +105°CTermination Resistance— 25 milliohms max. (initial and final)Insulation Resistance— 5000 megohms min. (initial)Dielectric Withstanding Voltage— 300 VAC
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verificationtests. They are intended for the Design, Component and Quality Engineer.
108-1332 AMPMODU 50/50 Grid Vertical Board-to-Board Connectors
108-1443 AMPMODU 50/50 Grid Right-Angle Board-to-Board and CableConnectors
Application Specifications describe requirements for using the product in its intendedapplication and/or crimping information. They are intended for the Packaging and DesignEngineer and the Machine Setup Person.
114-7010 AMPMODU 50/50 Grid Connector System
Instruction Sheets provide instructions for assembling or applying the product. They areintended for the Manufacturing Assembler or Operator.
408-9817 Manual Miniature Application Frame Assembly 91295-1
408-9909 Cover Closing Kit 543518-1
30Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System
Micro-M
aTch
Miniature
ConnectorS
ystem
Miniaturization and thetrend towards higher den-sity of electronic functionson a substrate led to theintroduction of smallerinterconnection systems.The Micro-MaTch connectorfamily, with it’s contactspacing of 1.27 mm, fullycomplies with the electronicpackaging requirements oftoday and the future. Thesystem offers a range ofboard and wire connectors,enabling a variety of wire-to-board and board-to-boardinterconnections.The Micro-MaTch contactconcept shown on this pageis essentially different fromother systems available.
By its design the traditionalfailure mode in tin platedconnections, fretting corro-sion, is prevented. Due toan additional positioningspring in the female part,
relative movements causedby vibrations/thermalexpansion between maleand female contacts areabsorbed. By preventingmovements on the contactspot, a gas tight connectioncan be guaranteed underall circumstances.
The contact spring islocated in the board con-nector and not in the cableconnector, which is usuallythe case. The counter part,incorporated in the cableconnector, is a simple pin,either with an insulation dis-placement section, suitablefor the mass-termination ofcable or with a kinked sol-der leg to be soldered ontoa PC Board. The separationof these two basic functionsof the contact system —contact force generationand wire termination —enables the independent
optimization of both func-tions and also leads torelatively simple contactshapes.
Because of their shapescontacts can be post-plated, leaving no bareedges in the contact andwire slot area. The contactspring system features anadditional spring member —the positioning spring —which compensates posi-tional tolerances. In this waythe contact spring can befully optimized for its basicfunction, so that the rela-tively high contact force,required for tin platedcontact systems, can beguaranteed under allcircumstances.
The Micro-MaTch contactspring system is absolutelyfretting corrosion proof byits design.
Features/ Benefits� Available in 2 to20 positions
� Applicable Wire:20~28 AWG
� Wire connectors suppliedon-tape and suitable formass termination of28 AWG [0.08 mm2 to0.09 mm2] ribbon cable
� Tin plated contact design
� Guaranteed minimumcontact force of 2.0 N
� Fretting corrosion proofthanks to additionalpositioning springmember
� Full range of applicationtooling from hand tool tofully automated equipment
1. Contact Pin
2. Contact Spring
3. Positioning
1
2
3
31Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Overview Technical Data
Micro-M
aTchMiniature
ConnectorSystemOverview
TechnicalData
Technical DataCenterline: 1.27 mm (staggered)Number of Positions: 4, 6, 8, 10, 12, 14, 16, 18, 20, and some 24 positionsContact Material: Phosphor bronzeContact Finish: Tin over NickelHousing Material: Thermoplastic polyester, red, glass-filled
For surface mount versions polyamide 4.6Flammability rating: per UL 94 V-0UL-recognized: File E28476 Vol. 23 Section 4Contact Resistance: 10 MΩ max.Insulation Resistance: 1.000 MΩ min.Nominal Voltage: 230 VCurrent Rating: 1.5 A max.Temperature Range: -40° C to +105° C (operating)Mating Force: 5N max. per contactUnmating Force: 1N min. per contactMinimum Contact Force: 2N min.Product Specification: 108-19052Application Specification: 114-19016, 114-19051RoHS Compliance Code: Always RoHS compliant (directive 2002/95/EC) for all typesLead-free Process Capable: Wave solder capable to 265° C for through hole versions
reflow solder capable to 260° C for SMD versions
PC Board ConnectorsPC Board Thickness: 1.6 mm nominalPC Board Hole Diameter: 0.8 mm for solder connectors
Ribbon ConnectorsCable Type: Ribbon cable, UL Style 2651Conductor Spacing: 1.27 mm (.050")Conductor Diameter: Solid 0.30 mm diameter Stranded 0.08 mm2
7 x 0.12 - 0.13 mm (other diameters and/or configurationson request)
Insulation Type: semi-rigid PVCInsulation Diameter: 0.9 ± 0.1 mm
Discrete Wire (COSI) ConnectorsCable Type : AWG 28-24 and 24-20
32Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Applications (3 Dimensions)
Micro-M
aTch
Miniature
ConnectorS
ystem
Applications
(3Dim
ensions)
Female Connectors
Male Connectors
Female Top Entry Part Number 215079
Male-on-WirePart Number 215083
Male-on-BoardPart Number 215464
COSIPart Number 338095Part Number 338096Part Number 338097
Paddle BoardPart Number 215570
Female Side Entry Part Number 215460
SMD Top EntryPart Number 188275
1 2 3
4 5/6 7
8 9 10
Image Description (see also page 33)1 Wire-to-Board through hole2 Board-to-Board through hole3 Wire-to-Board (discrete wire), through hole4 Wire-to-Board right angle, through hole5 Board-to-Board right angle, through hole6 Board-to-Board right angle, through hole7 Wire-to-Board right angle (discrete wire), through hole8 Wire-to-Board surface mount9 Board-to-Board surface mount, through hole10 Wire-to-Board (discrete wire), surface mount
33Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System Applications (2 Dimensions)
Micro-M
aTchMiniature
ConnectorSystemApplications
(2Dim
ensions)
B
A
C
AC
B
C
A
B
C
A
B
C
D
A
E
B
C
D
A
B
D
A
C
B
D
A
B
D
A C B
CGE
C BA
CD
F
Female Top Entry Part Number 215079
Male-on-WirePart Number 215083
Male-on-BoardPart Number 215464
COSIPart Number 338095Part Number 338096Part Number 338097
Paddle BoardPart Number 215570
Female Side EntryPart Number 215460
SMD Top EntryPart Number 188275
1 2 3
45
76
8 9 10
Female Connectors
Male Connectors
Dimensions (mm)Image
A (max) B (max) C D (max) E (max) F(max) G (max)1 5.2 7.5 2.54 — — — —2 5.2 6.2 2.54 — — — —3 5.2 9.7 2.54 — — — —4 8.4 5.9 2.54 1.5 — — —5 5.2 5.9 2.54 1.5 7.0 1.6 —6 5.2 5.9 2.54 1.5 — — 2.87 5.2 5.9 2.54 1.5 10.6 — —8 5.2 8.5 — 7.1 — — —9 5.2 7.1 2.54 7.1 — — —10 5.2 10.7 — 7.1 — — —
34Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —Female-on-Board Connector, Top Entry
Micro-M
aTch
Miniature
ConnectorS
ystem
—Female-on-Board
Connector,TopEntry
This connector versionincorporates the patentedMicro-MaTch contact springsystem and is designed tobe soldered onto PCBoards with a nominal thick-ness of 1.6 mm.
The solder legs areindented, providing firmretention of the connectorbefore and during thesoldering operations.
As polarization is accom-plished directly between theMicro-MaTch male connec-tors and the PC Board, thistop entry female connectordoes not have any polariz-ing features. Therefore, theorientation of the connectoron the PC Board is irrele-vant.
1.5[.059]
1.27[.050]
A
B Max.
3.1[.122]
1.9[.074]
4.0[.157]
5.1[.200]
Max.
2.54[.100]
2.54[.100]
1.27[.050]
1.40[.055]
1.80[.071]
1.50[.059]
0.80[.031]
Hole forPolarization Pin
Typical Hole PatternNot Solder Side Shown
No. of PositionsDimensions (mm) Part NumbersA B 2500 Connectors/Reel 250 Connectors/Box
4 3.81 7.1 215079-4 7-215079-46 6.35 9.7 215079-6 7-215079-68 8.89 12.2 215079-8 7-215079-810 11.43 14.7 1-215079-0 8-215079-012 13.97 17.3 1-215079-2 8-215079-214 16.51 19.8 1-215079-4 8-215079-416 19.05 22.4 1-215079-6 8-215079-618 21.59 24.9 1-215079-8 8-215079-820 24.13 27.4 2-215079-0 9-215079-0
Notes:1. Connectors are always sideways mounted onto an adhesive tape.2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm.3. At additional charge a special packaging option is available: 250 connectors on
a reel with a diameter of 250 mm, packed in a dedicated dispenser box.
Mates with:X-338095-XX-215083-XX-215464-XX-338728-X
METRICDimensions are
millimeters over inches
35Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —Female-on-Board Connector, Side Entry
Micro-M
aTchMiniature
ConnectorSystem—
Female-on-Board
Connector,SideEntry
This connector version isidentical to the top entryversion with two exceptions:
� The solder legs areparallel to the matingface of the connectorinstead of perpendicular.
� It's housing is polarized,so that polarization isaccomplished directlybetween the two matingconnectors. Properorientation of theconnectors on the PCBoard is relevant here.
0.90[.039]
1.27[.050]
2.54[.100]
3.85[0.15] 2.54
[0.09]
5.8[0.23]
3.1[0.12]
BMax.
A
5.3[0.21]
2.54[0.09]
2.54[0.09]
1.27[0.05]
0.80[0.03]
Nom.
Max.