T E A K P R O D U C T S F O R

H O M E • P A T I O • B O A T • R V

1

Welcome to Whitecap TeakMade of the �nest teak lumber certi�ed by the government of Thailand as harvested fro

m man

aged

fore

sts.

TABLE OF CONTENTS

1 Teak Cleaning 2 Deck 4 Teak Swim Platforms5 Poly Swim Platforms6 Table Tops7 Cockpit Tables8 Kitchen/Galley 12 Bathroom/Head14 Devise Storage14 Name Plates 15 Storage18 Molding20 Trim21 Covers 21 Trim Rings22 Louvered Inserts23 Cabinet Doors23 Cabinet Drawers24 Grate Material 25 Lumber25 Louvered Door Material26 Racks27 Drink Racks30 Tables32 Seating

luster. No other species or origins of wood are used in our products, nor are veneers. All our products are

made of solid teak.

Care and Maintenance of TeakTeak does not require any type of finish to maintain long life or preserve it’s surface. When left unfinished, teak weathers in the elements to a silver grey color. It can be easily cleanedusing a soft brush and some soap and water. Some prefer this look for exterior applications. To maintain teak’s rich luster, clean often with a damp cloth and apply Whitecap Golden Teak Oil. To restore weathered teak to a rich luster, clean with Whitecap teak maintenance products. Our 3-Step System cleans, brightens and preserves teak wood. These products are ideal for use on teak furniture and marine teak accessories. Step 1, cleaning. Clean dirty and/or stained wood with Whitecap Premium Teak Cleaner. Step 2, brightening. To bring out the natural wood grain and wood color treat with Whitecap Premium Teak Brightener. Step 3, preserving. To preserve, seal and protect cleaned teak, apply Whitecap Premium Golden Teak Oil which is custom formulated with special natural oils that protect and beautify teak wood. To maintain the rich luster of teak, apply Whitecap Golden Teak Oil annually or more often in harsher environments. Avoid chemical cleaners.

Teak Cleaning Teak CleanerPart DescriptionTK-81000 16 oz. Premium Teak Cleaner TK-81000C*• Cleansweathered&stainedteakwithout hardrubbing •Willnotharmfiberglassorpaintedsurfaces • Easytouse

Teak BrightenerPart DescriptionTK-91000 16oz.PremiumTeakBrightenerTK-91000C*• Brightensandenhancesthenaturalwood grainandcolor • Easytouse,nohardrubbing •Willnotharmfiberglassorpaintedsurfaces

Teak OilPart DescriptionTK-71000 16oz.PremiumGoldenTeakOilTK-71000C*• Preserves,sealsandprovidesaprotective finishtoteakwood • Penetratesdeepintotheteakforultimate protection • Driesquickly*PackagedforsaleinCanada

WeatheredTeakBeforeTreatment Step1CLEAN Step2BRIGHTEN Step3PRESERVE

WhitecapispleasedtoannouncetheadditionthreenewWhitecapteakmaintanenceproducts.Our3-StepSystemcleans,brightensandpreservesteakwood.Theseproductsareidealforuseonteakfurnitureandmarineteakaccessories.

STEP 1 CLEANINGCleandirtyand/orstainedwoodwithWhitecapPremiumTeakCleaner.

STEP 2 BRIGHTENINGTobringoutthenaturalwoodgrainandwoodcolortreatwithWhitecapPremiumTeakBrightener.

STEP 3 PRESERVINGTopreserve,sealandprotectcleanedteak,applyWhitecapPremiumGoldenTeakOilwhichiscustomformulatedwithspecialnaturaloilsthatprotectandbeautifyteakwood.Tomaintaintherichlusterofteak,applyWhitecapGoldenTeakOilatthefirstsignofweathering.

Teak Packaging

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Whitecapistheleaderinhighqualityteakmarinedeckandcabinaccessories.AllofourproductsarehandcraftedfromthefinestteakwoodcertifiedbythegovernmentofThailandasharvestedfromsustainablemanagedforests.Inanefforttoaddevenmorevaluetoourexceptionalproductswearepackagingsomeofourmorepopularitemsinnewshrinksealedpackagingwithfullcolorlabeling.Ournewcolorfulpackagingoffersaddedprotection,shelfappealandprovidesmoreproductinformationtotheconsumer.

About Our Teak ProductsWhitecap teak is produced in the same factory in Thailand that has been supplying the North American marine industry for over 40 years. Whitecap teak accessories are produced from the finest teak lumber certified by the government of Thailand as harvested from managed forests. Teak

is one of the world’s most desired hardwoods.

Teak’s naturally high oil content makes it incredibly durable. Teak

resists warping, rotting,termites and other insects.

Teak will last for decades. Teak can withstand the most extreme weather conditions including salt, sun, snow and rain. Not only is teak durable, it’s beautiful to see and touch. Its intricate grain patterns and color variations make each piece unique unto it’s self. There are no other hardwoods that

can match the soft, warm, silky feel of teak that comes from the rich oil contained in the wood.Whitecap teak products are made from kiln

dried, fully aged teak wood. To ensure strength and durability, each of our handcrafted products uses traditional assembly techniques, such as dove-tail and mortice & tenon joints. All screw fittings are countersunk and plugged. Only high-quality waterproof adhesive is used. Each item is sanded and finished by hand to a rich elegant

Teak Winch PadsPart Description BaseDiameter TopDiameter Height Angle60164* 5-1/4” 4-1/4” 1-1/4” 0°60166* 7-1/8” 6-3/8” 1-1/4” 0°60169 8-3/4” 7-3/4” 1-1/2” 15°60464 4-3/8” 3-1/2” 1-1/4” 0°60465 4-5/8” 4” 1-1/4” 0°60466 5-3/8” 4-1/2” 1-1/4” 0°60467 6-1/4” 5-1/4” 1-1/4” 0°60468 6-3/4” 6” 1-1/4” 0°60469 7-7/8” 7” 1-1/8” 0°60470 3” 2-1/4” 1-1/8” 15°60471 4-3/8” 3-7/8” 1-1/8” 15°60473 5-1/2” 4-7/8” 1-1/8” 15°60474 6-1/8” 5-5/8” 1-1/4” 15°60475 6-3/4” 6” 1-1/4” 15°60476 7-1/4” 6-1/2” 1-1/4” 15°* Fullcolorretailpackaging

Teak Wedge/Door StopPart Description60478 1-3/4”Wx4-5/8”L 1-1/4”Thickonhighend, 3/8”onlowend

Deck

Teak Swim PlatformsPart Description60924 24”-24”W(back),22”W(front)18”D60972-OEM 72”-72”W(back),62-3/4”W(front)60980-OEM 80”-80”W(back),70-3/4”W(front)60990-OEM 90”-90”W(back),80”W(front)

Swim Platform Mounting BracketsPart Description60993 7”Hx14”Dx1-1/2”W •Useon60924,6592460995 9”Hx17”Dx1-1/2”W •Useon60972,60980,65984,6597260996 14”Hx21”Dx1-1/2”W •Useon60990•Bracketsare102º,or12ºoffof90º

•Largeplatformsare22”deep and1-5/16”thick

•Builtwithwaterproof resorcinolglueandscrews

•Allholesarecountersunkandplugged

•6”widebackplankallowsplatformstobe customfittedtomosttransoms

304StainlessSteel

60924

2 3

Teak Flooring PanelPart Description 60870 •Sheetsize:47-1/4”Widex78-3/4”Longx 1/4”Thick.Teakstripsare1-3/4”wide, blackSikaflexstripisapproximately1/8”wide •Solidteakstripsarebondedtogether withUV resistantpolyurethanebasedSikaflexjoint sealingcompound.Thisflexiblematerialis speciallyformulatedforcaulkingjointsin traditionalmarinedecking.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Teak Name BoardPart Description62720 30”Wx5-1/8”Hx5/8”Thick •Solidteak

Dorade Box Waterproof Venting SystemPart Description60310 16”Lx7”Wx5-3/8”H •Solidteak

Teak Outboard Mounting BracketPart Description60326 6-7/8”Wx6-5/8”Lx1-1/2”Thick •Formotorsupto12h.p.only •Fits7/8”or1”railings •Fullcolorretailpackaging

Teak Cooler/Box ChocksPart Description60329 Chockmeasures:4-1/2”Wx4-1/2”Dx5/8”Thick •Setoffour

Teak Deck StepsPart Description Size60502 15”Wx6”Dx1/2”Thick Large60504 11-1/2”Wx4-1/2”Dx1/2”Thick Medium60506 8-3/4”Wx3-1/2”Dx1/2”Thick Small

Deck

Base Diameter

Top Diameter

Height

Base Diameter

Top Diameter

HeightAngle

Canted Winch Pad

PlatformTop

PlatformUnderside

Teak Swim Platform w/Mounting Hardware for Boats w/ Outboard MotorsPart Description 60900 •304stainlesssteelhardware •Assemblyrequired

Teak Swim Platform w/Ladder and Mounting Hardwarefor Boats w/Outboard MotorsPart Description 60902 •304stainlesssteelhardware •Assemblyrequired

Teak Swim Platform w/Mounting Hardware for Boats w/ Inboard/Outboard MotorsPart Description 60901 •304stainlesssteelhardware •Assemblyrequired

Teak Swim Platform w/Ladder and Mounting Hardware for Boats w/ Inboard/Outboard MotorsPart Description 60903 •304stainlesssteelhardware •Assemblyrequired

Teak Ladder Step

Part Description 60944 •6”Wx1-7/8”Dx7/8”Thick

Teak Swim Platform - 18”Part Description 60918 •18”W(back),17”W(front)x15”Dx 1-5/16”Thick

Teak Swim Platforms

Poly SwimPlatforms

Platform Dimensions: 18”W(back),17”W(front)x15”Dx1-5/16”Thick

White Poly Swim Platform w/Mounting Hardware for Boats w/ Outboard MotorsPart Description 67900 •304stainlesssteelhardware •Assemblyrequired

White Poly Swim Platform w/Ladder and Mounting Hardware for Boats w/Outboard MotorsPart Description 67902 •304stainlesssteelhardware •Assemblyrequired

White Poly Swim Platform w/Mounting Hardware for Boats w/ Inboard/Outboard MotorsPart Description 67901 •304stainlesssteelhardware •Assemblyrequired

White Poly Swim Platform w/Ladder and Mounting Hardware for Boats w/ Inboard/Outboard MotorsPart Description 67903 •304stainlesssteelhardware •Assemblyrequired

GudgeonPart Pin Size Fastener Material6208 5/16” 4-5/8”L #10 316SS x1-1/4”H

Platform Dimensions: 18”W(back),17”W(front)x15”Dx3/4”Thick

4 5

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Replacement Stainless Steel RailsFor Swim Platforms Available Separately

6 7

Four Drinkholder w/ Removable Cockpit TablePart Description 61394 • TableTopDimensions:16”Wx24”L • Drinkholderholdsfourglassesor twoglassesandpairofbinoculars • Drinkholderscanbeusedwithoutthetable • Installswithoutdrillingpedestalguard • Inthedownposition,tabletophangson hooksandsecurestothepedestalguard withclips • Installson7/8”or1”diametertubing pedestalsteeringguardswithincluded nylonsteeringpedestalclamps(PN61395) •Tabletopiseasytoremove,canbeusedasa trayorstowed

The steering post cannot protrude beyond the front of the pedestal guard. If so, the table will not properly attach to the guard due to interference from the steering post.

Steering Pedestal ClampPart Description 61395 • Usetomountcockpittable(2-required) • Fits7/8”and1”pedestalguardtubing

Cockpit Table w/ Folding Leaves and Four DrinkholderPart Description 61392 • Brasshinges/stainlesssteelhardware • TabletopDimensions: Closed:16”Wx24”L Open: 32”Wx24”L • Drinkholderholdsfourglassesor twoglassesandpairofbinoculars • Fold-downsupportleg:30-1/2”long • Installson7/8”or1”diametertubing pedestalsteeringguardswithincluded nylonsteeringpedestalclamps(PN61395) • Installswithoutdrillingpedestalguard • 2-brassbarrelbolts(PNS-585B)included,to securetableleaveswhenthetableisinthe foldedposition • Unitcanberemovedforstorageby removingclamps • Naturalfinish • Someassemblyrequired

The steering post cannot protrude beyond the front of the pedestal guard. If so, the table will not properly attach to the guard due to interference from the steering post.

Cockpit TablesTable Tops

Solid Teak Pedestal Table Tops • Solidteaktabletopswithfinished,raisedlipedge• Mountstostandardpedestaltablehardware• Greatlightweight,durable,portabletable• Usercanadd3-7/8”diameterdrinkholder cutouts

Teak Rectangle Table TopPart Description 61398 •16”Wx28”Lx1-1/8”Thick •Solidteak

Teak Oval Table TopPart Description 61399 •18”Wx30”Lx1-1/8”Thick61400 •16”Wx30”Lx1-1/8”Thick •Solidteak

Teak Round Table TopPart Description 61397 •24”Diameterx1-1/8”Thick •Solidteak

Add Drinkholders To Teak Table Tops with Our Easy to Install Stainless Steel Flush Mounted Drinkholders!

UniqueLeaf Support

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

LED Illuminated Flush DrinkholderPart Cut-Out O.D. Depth Material ColorS-3511B 3-3/4” 4-1/4” 2-1/4-3-1/8” 304SS BlueS-3511R 3-3/4” 4-1/4” 2-1/4-3-1/8” 304SS Red•Includesmountinggasket,pad&3/8”draintube •Fitscans,bottles&cancoolers• 12Voperation,includes6”wireleads

Flush DrinkholderPart Cut-Out O.D. Depth MaterialS-3511 37/8” 43/8” 2-1/4-3-1/8” 304SS•Includesmountinggasket,pad&3/8”draintube •Fitscans,bottles&cancoolers

8 9

Bar RackPart Description 62550 •Holds4glasses,2bottles,storagefor baraccessories •17-3/4”Wx4-1/2”Hx8-1/4”D

Serving TrayPart Description 62418 •Oiledfinish •18-3/4”Lx12-1/4”Wx1-7/8”H

Cutting BoardPart Description 62416 •Solidteak •Protectivenon-skidfeet •11”Lx8”W

Large 8” Square TrivetPart Description 62421 •Oiledfinish

Small 6” Square TrivetPart Description 62420 •OiledFinish •Fullcolorretailpackaging

Stay-Put Napkin HolderPart Description 62434 •Holdsregularandcocktail sizenapkins •7-3/8”Wx2-3/4”Hx6-3/4”D •Preventnapkinsfromblowingaway •Oiledfinish

Traditional Napkin HolderPart Description 62432 •Standingunitholdsanysizenapkin •8-1/4”Wx5-1/2”Hx3-7/8”D •Oiledfinish

Napkin HolderPart Description 62433 •5-7/8”Wx3”Hx1-7/8”D •Oiledfinish

Kitchen/GalleyKitchen/Galley

Dish/Cup/Paper Towel RackPart Description 62402 •Holds4platesupto11”diameter •Holdsstandardpapertowelroll •Spring-loadedbar •22-1/4”Wx16”Hx4-1/8”D

Dish/Cup HolderPart Description 62406 •Holds4eachofplatesandcups •19-3/4”Wx11-1/2”Hx4-1/4”D

Dish/Cup/Utensil HolderPart Description 62404 •Holdscups,plates,andflatware •16-1/4”Wx9-7/8”Hx7-1/8”D

Cutlery RackPart Description 62414 •5-7/8”Wx8-5/16”Hx3-3/16”D •Threesilverwaresectionsandsixknifeslots

Modular Cup RackPart Description 62408 •Holds3-4cups •4-1/4”Wx10-3/8”Hx4-1/4”D

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

1110

Kitchen/Galley Kitchen/Galley

Wine Bottle RackPart Description 62618 •Holds750mlwinebottle •3-7/8”Wx5-1/2”Hx3-3/4”D •Bulkheadmount

Two-Bottle RackPart Description 62620 •Holdstwo750mlwinebottles •8-3/8”Wx5-1/2”Hx3-3/4”D •Bulkheadmount

Overhead Wineglass RackPart Description 62425 •Holdsupto12largewineglasses •16-5/8”Wx11-3/4”Dx7/8”Thick •Space-savingoverheadmount •Fullcolorretailpackaging

Wineglass Rack with ShelfPart Description 62426 •Holdsupto8smallwineglasses •17-1/2”Wx2-1/2”Hx5”D •Bulkheadmount •Fullcolorretailpackaging

Two-Tier Spice RackPart Description 62440 •Holdsupto6standardspicebottles oneachself •Shelvesare3”deep •13-1/8”Wx10-1/8”Hx4-1/4”D

Small Spice RackPart Description 62436 •Holdsupto9spicebottles •14”Wx2-7/8”Hx4”D •Fullcolorretailpackaging

Large Spice RackPart Description 62438 •Holdsupto15spicebottles •23-3/8”Wx2-7/8”Hx4”D •Fullcolorretailpackaging

Stand-Up Paper Towel HolderPart Description 62444 •13-1/2”Hx5-7/8”Diameter •Fitsstandardorjumboroll •Oiledfinish

Spice Rack with Paper Towel HolderPart Description 62446 •13-1/16”Wx10”Hx3-3/4”D •Holdsstandardpapertowelroll •Spring-loadedbar

Wall-Mount Paper Towel HolderPart Description 62442 •Takesstandardorjumboroll •Spring-loadedbar •12-1/4”Wx1-7/8”Hx4-3/8”D •Fullcolorretailpackaging

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

1312

Porthole MirrorPart Description 62540 •Teakframewithbrassstuds •10-1/2”Diameter •Oiledfinish

Rectangular MirrorPart Description 62544 •11”Wx15”H •Oiledfinish

Medicine ChestPart Description 62354 •11”Wx15”Hx4-1/2”D •Canbemountedtoopenleftorright •Adjustableshelves •Glassmirror •Fullcolorretailpackaging

Tissue Box HolderPart Description 62344 •Usewith4-3/8”squaretissueboxes •5-1/4”Wx5-5/8”Hx5-1/4”D

Toilet Tissue RackPart Description 62322 •Spring-loadedbar •5-1/2”Wx1-7/8”Hx3-3/4”D

Towel BarPart Description 62330 •14”Wx1”Hx2-1/2”D •Includesmountinghardware

Long Towel Bar Part Description 62332 •23”Wx1”Hx2-1/2”D •Includesmountinghardware

Towel Ring Part Description 62338 •6”Wx9-1/2”Hx2”D

Towel Rack Part Description 62334 •16”Wx1-7/8”Hx3”D

Long Towel Rack Part Description 62336 •22”Wx1-7/8”Hx3”D

Toothbrush HolderPart Description 62310 •5-3/4”Wx1-7/8”D •Holds4standardtoothbrushes

Glass & Toothbrush HolderPart Description 62312 •4-3/4”Wx1-1/16”Hx3-1/4”D •Holds4standardtoothbrushes

Oval Soap DishPart Description 62315 •Slottedbase •7-1/8”Wx1-3/8”Hx3-9/16”D

Soap DishPart Description 62314 •Includesclearplasticinsert •4-3/4”Wx1-9/16”Hx3-1/4”D

Liquid Soap HolderPart Description 62316 •Holds10-1/2oz.ovalbottle •3-3/4”Wx4-3/8”Hx2-3/4”D

Bath/Head Bath/Head

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

1514

Devise Storage StorageiPad® RackPart Description 65855 •Outside:8”Wx9-5/8”Hx1-1/16”D •Inside:2-1/2”Wx9-5/16”Hx9/16”D •Chargingcablecut-out •Canbemountedhorizontallyorvertically •Pre-drilledmountingholes •Fullcolorretailpackaging

iPhone® RackPart Description 63272 •Outside:3”Wx4-3/16”Hx1”D •Inside: 2-1/2” Wx4”Hx1/2”D •Chargingcablecut-outinbottom •Holdsphonewithorwithoutprotectivecase •Pre-drilledmountingholes •Fullcolorretailpackaging

Adjustable Tablet RackPart Description 65856 •Outside:5-3/4”Wx7-5/16”Hx1”D •Inside:5-1/4”Wx7”Hx1/2”D •Chargingcablecut-out •Expandstoholdvarioustabletsizes •Canbemountedhorizontallyorvertically •Pre-drilledmountingholes •Fullcolorretailpackaging

Hardcover Book RackPart Description 62512 •15”Wx7-1/4”Hx7-1/4”D •DoublesasutilityshelfPaperbackBook

VHS Cassette/Paperback Book RackPart Description 62514 •15”Wx6”Hx5-1/4”D •Holds13VHScassettes •Holdsstandardsizepaperbackbooks

CD RackPart Description 62520 •8-5/8”Wx5-5/8”Hx5-1/4”D •Holds16jewelcaseCDs

Mini RackPart Description 62524 •5-7/8”Wx4-1/8”Hx3-7/8”D •Insidedimensions:4-5/8”Wx2-3/4”D

Audio Cassette RackPart Description 62522 •15”Wx4-1/4”Hx3-1/2”D •Holds21audiocassettetapes

Captain Name PlatePart Description 62670 •3-7/8”Wx1”Hx1/4”Thick •Oiledfinish

No Smoking Name PlatePart Description 62672 •3-7/8”Wx1”Hx1/4”Thick •Oiledfinish

Toilet Name PlatePart Description 62674 •3-7/8”Wx1”Hx1/4”Thick •Oiledfinish

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

1716

Storage Storage

Stow RackPart Description 62526 •13-1/2”Wx1-7/8”Hx3”D •Amulti-purposeholderforwallets,keys,etc. •Canalsobeusedasashowercaddy

Utility ShelfPart Description

62554 •21”Wx5”Hx6”D •Wall-mount •Fullcolorretailpackaging

Chart CaddyPart Description 62534 •Two-pieceset,surfacemount •24”Hx3-7/8”Dx1/2”Thick

Navigation TrayPart Description 62530 •17-1/2”Wx3-7/16”Hx2-3/4”D

Pencil HolderPart Description 62536 •4-3/4”Wx3-1/4”Hx1-1/8”D •Fullcolorretailpackaging

Navigation RackPart Description 62532 •16-3/4”Wx5”Hx3-1/2”D

Grate Front Magazine RackPart Description 62502 •Wallmount •10-1/2”Wx11-1/4”Hx4-3/8”D

Magazine/Utility RackPart Description 62504 •9-3/4”Wx9-1/2”Hx4-1/8”D •Wall-mountorfree-standing •Usetostoreplates,magazines, navigationbooksorcharts •Fullcolorretailpackaging

Magazine RackPart Description 62506 •Completewithrearmountingbar •14-3/4”Wx12”Hx4-1/4”D •Bulkheadmount •Fullcolorretailpackaging

Double-Wide Magazine RackPart Description 62508 •18-3/8”Wx9-1/2”Hx4”D •Wall-mountorstandalone •Extra-largecapacity,displaysmagazines side-by-side •Largeenoughforchartsand navigationbooks •Fullcolorretailpackaging

Utility HookPart Description 62560 •7”Hx3-3/4”Dx7/8”Thick •Sturdyhookholdsclothing,hatsorgear

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Rail Molding Part Description 60831 StraightLength RailMolding •5ft.length

Part Description 60833 OutsideCorner RailMolding •Insideradius:2” •Outsideradius:2-1/2”

Part Description 60832 InsideCorner RailMolding •Insideradius:1-3/4” •Outsideradius:2-1/4”

Edge Molding Part Description 60835 StraightLength EdgeMolding •5ft.length

Part Description 60837 OutsideCorner EdgeMolding •Insideradius:2” •Outsideradius:2-1/2”

Part Description 60836 InsideCorner EdgeMolding •Insideradius:1-3/4” •Outsideradius:2-1/4”

Bunk Rail Molding Part Description 60847 BunkRailMolding •5ft.length

Cap Molding Part Description 60840 LargeCapMolding ADimension:1/2” BDimension:7/8” CDimension:1-3/16” DDimension:3/4” •5ft.length

Part Description 60841 SmallCapMolding ADimension:3/8” BDimension:5/8” CDimension:7/8” DDimension:1/2” •5ft.length

“L” Molding Part Description 60843 Large“L”Molding ADimension:1-3/16” BDimension:1-3/16” CDimension:13/16” •5ft.length

Part Description 60844 Small“L”Molding ADimension:7/8” BDimension:7/8” CDimension:5/8” •5ft.length

Quarter Round Molding Part Description 60850 LargeQuarterRound ADimension:1/2” BDimension:1/2” •5ft.length

Part Description 60851 SmallQuarterRound ADimension:3/8” BDimension:3/8” •5ft.length

Stop Molding Part Description 60853 LargeStopMolding ADimension:3/8” BDimension:3/4” •5ft.length

Part Description 60854 SmallStopMolding ADimension:3/8” BDimension:3/8” •5ft.lengthMolding available in 5 ft. lengths

Molding

“A”Dimension:3/8”

Molding

14

58

12

78

1 58

78

12

1316

C

BA

D

A

BC

14

58

3161

34

1/2” Track Bulkhead Molding Part Description 60821 1/2”TrackStraightLength BulkheadMolding •5ft.length

Part Description 60823 1/2”TrackOutsideCorner BulkheadMolding •Insideradius:1-3/4 •Outsideradius:2-1/4”

Part Description 60822 1/2”TrackInsideCorner BulkheadMolding •Insideradius:1-3/4” •Outsideradius:2-1/4”

3/4” Track Bulkhead Molding Part Description 60825 3/4”TrackStraightLength BulkheadMolding •5ft.length

Part Description 60827 3/4”TrackOutsideCorner BulkheadMolding •Insideradius:2” •Outsideradius:2-1/2”

Part Description 60826 3/4”TrackInsideCorner BulkheadMolding •Insideradius:2” •Outsideradius:2-1/2”

Part Description 60805 3/4”Track CornerCap/HandHold BulkheadMolding •3/4”insidetrack •Usewith60825

1 38

78

12

1316

2 38

78

12

1316

B

A

38

12

134

5161

516

B

A

B

A

Pin Rails

L-Type Pin Rail Part Description 60703 •2-9/16”Hx7/8”Dx5’L •5ft.length

Standard Pin Rail Part Description 60705 •3-9/16”Hx7/8”Dx5’L •5ft.length

Battens Part Description 60855 •3”Widex3/8”Thick •5ft.length

Part Description 60857 •1-7/8”Widex3/8”Thick •5ft.length

Part Description 60858 •1-7/16”Widex3/8”Thick •5ft.length

Part Description 60859 •1-3/16”Widex3/8”Thick •5ft.length

Part Description 60860 •7/8”Widex3/8”Thick •5ft.length

Corner Wire Molding Part Description 60861 SeeIllustration fordimensions •5ft.length

1918

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Outlet Cover, Receptacle PlatePart Description 60170 •3-5/8”Wx5-1/16”H •2-pack

Ground Fault Outlet Cover,Receptacle PlatePart Description 60171 •3-5/8”Wx5-1/16”H •2-pack

Switch Cover, Switch PlatePart Description 60172 •3-5/8”Wx5-1/16”H •2-pack

Blank Cover, Cover PlatePart Description 60174 •3-5/8”Wx5-1/16”H •2-pack

Teak Trim RingsPart Description 61973 5-3/8”DiameterTrimRing •3”DiameterOpening(ID) •3/8”Thick •5”InnerDiameter(insideflange)

61974 6-3/8”DiameterTrimRing •4”DiameterOpening(ID) •3/8”Thick •6”InnerDiameter(insideflange)

•Pre-drilledmountingholes •Backrecessed,1/8”flange •Usetotrimoutportholes

Finger Pull Part Description 60145 5/8”BarrelLength •1-1/4”O.D. •Recessmount

60146 1”BarrelLength •1-1/4”O.D. •Recessmount

Oblong Drawer PullPart Description 60124 •4-1/16”W •Recessmount, 1/2”Deep •2-pack

Round Drawer PullPart Description 60127 •1-3/8”Round •Recessmount, 3/8”Deep •2-pack

Rectangular Drawer PullPart Description 60135 •3-1/4”W •Recessmount, 1/2”Deep •2-pack

Large Rectangular Drawer PullPart Description 60142 •4-1/2”W •Recessmount, 1/2”Deep •2-pack

Oval Drawer PullPart Description 60147 •4”W •Surfacemount •2-pack withhardware

Trim

• 20 per package

• 2 per packageCovers & Trim RingsTeak Plugs

Part Description 60150 1/4”Plug62516 5/16”Plug60151 3/8”Plug60152 1/2”Plug60153 5/8”Plug60154 3/4”Plug60155 1”Plug

Teakplugsareavailableindividuallyorinbulkpacksof20,100and500pieces.Callforpriceandavailability.

Thru-Hull PlugPart Description 60148 4”Thru-HullPlug60149 6”Thru-HullPlug

Round Drawer KnobPart Description 60120 •2”Diameter •Surfacemount •2-packwithhardware

Square Drawer KnobPart Description 60130 •1-1/8”Square •Surfacemount •2-packwithhardware

Rectangular Drawer KnobPart Description 60131 •2-3/4”W •Surfacemount •2-packwithhardware

Handle Drawer PullPart Description 60137 •3-5/8”fromcenter tocenter •Surfacemount •2-pack

2120

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

2322

Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge. All items have a 1/2” rabbet and use a cutout size one inch less than the listed dimension. Hardware is not included with drawer and door fronts.

LouveredInserts

Doors &Drawers12” x 12” Louvered Door & FrameRight Hand OpeningPart Description 60720 •Cutout:11”Wx11”H

12” x 12” Louvered Door & FrameLeft Hand OpeningPart Description 60721 •Cutout:11”Wx11”H

15” x 15” Louvered Door & FrameRight Hand OpeningPart Description 60722 •Cutout:14”Wx14”H

15” x 15” Louvered Door & FrameLeft Hand OpeningPart Description 60723 •Cutout:14”Wx14”H

15” x 20” Louvered Door & FrameRight Hand OpeningPart Description 60724 •Cutout:14W”x19H”

15” x 20” Louvered Door & FrameLeft Hand OpeningPart Description 60725 •Cutout:14”Wx19”H

12” Drawer/Door Front & FramePart Description 60730 •12”Wx6”H

15” Drawer/Door Front & FramePart Description 60732 •15”Wx7”H

18” Drawer/Door Front & FramePart Description 60734 •18”Wx8”H

21” Drawer/Door Front & Frame Part Description 60736 •21”Wx9”H (NOTPICTURED)

1/2” Stainless Steel Offset HingesPart Description S-3025 •Canbeusedwithteakdrawerandlouvered doorfronts •Soldindividually

Size Offset Fastener Material 1-1/2”x2-1/4” 3/8”x1/2” #8(5) 304SS

Louvered InsertPart Description 60712 •9-1/8”Wx7-1/2”Hx3/4”Thick •Cutout:8-1/2”Wx6-1/2”H

Louvered InsertPart Description 60710 •9-1/8”Wx16”Hx3/4”Thick •Cutout:8-1/8”Wx15”H

Louvered InsertPart Description 60714 •11-3/16”Wx6-3/8”Hx3/4”Thick •Cutout:5-3/8”Hx10-3/16”W

Louvered InsertPart Description 60716 •18”Wx9-3/8”Hx3/4”Thick •Cutout:17”Wx8-3/8”H

Air Conditioning VentPart Description 60629 •Adjustableslatscontrolairdirection •9-3/4”Wx5-3/4”Hx1-1/2”Thick •Cutout:8-3/4”Wx4-3/4”H

DOOR 1/2"o�set

Hinge

FRAME

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

24 25

Build Your Own Teak Cockpit GrateBuildyourowncustomizedcockpitgrate.Whitecapoffersnotchedgratingmaterialinthreethickness/cutoutsizeswithcorrespondingflatgratestrips.Agratecanbebuilttwoways:Usenotchedstripsinbothdirections,orusenotchedstripsinonedirectiononthebottomlayerandflatstripsintheoppositedirectiononthetoplayer.Thisconstructionstylewillallowwatertodrainunderneathgratesinstalledonflatsurfaces.

Whenbuildingagrateusematerialsthatareallthesamethickness,1/2”,3/4”or1”.Seechartonleft.

1/2” Grate MaterialUseforiceboxgratingorwherethegratewillnotneedtosupportasignificantload.

3/4” Grate MaterialUseinshowersorcockpitswithrelativelyflatconfigurations.

1” Grate MaterialUseincockpitswithasignificantslope,orplaceswheregratingwouldberequiredacarryaheavyload.

Use these material ordering guidelines: 1/2” Grating:Onestripofeachtypeofgratingforeachinchoftheareayouarecoveringinbothdirections.3/4” Grating:Onestripofeachtypeofgratingforevery1-1/2”oftheareayouarecoveringinbothdirections.1” Grating:Onestripofeachtypeofgratingmaterialforevery2”oftheareayouarecoveringinbothdirections.

If framing is required, consider Dimension A of framing material.

AssemblyMeasure,cut,assemblewithglue,drillwithacountersinkbit,andscrewtogetherwithbrassorstainlessscrews.Werecom-mendapplyingwaterproofgluetoeverygrateintersection,andusingascrewateveryotherintersection.Theuseofscrewsduringconstructionisespeciallyimportantinthetwolargersizesofgratingmaterial.

Grate Material

Louvereddoormaterialmakesiteasytobuildyourowncustom-sizedlouvereddoor.Assembleswithsimpletools.Justmeasure,cut,drillandassemble.Todeterminetheamountofslatmaterialneeded,subtract4”fromtheoverallwidthofthedoorand4”fromtheoverallheightofthedoorandmultiplythetwonumbers.Thiswillequalthetotalnumberofinchesoflouverslatsrequired.Don’tforgetthedowelpins.

4’ Louvered Door Side RailsPart Description 60880 •Pair-leftandright •1-7/8”Wx4’Lx7/8”Thick

4’ Louvered Door Top or Bottom StilePart Description 60881 •1-7/8”Wx4’Lx7/8”Thick

4’ Louver Slat MaterialPart Description 60882 •1-3/16”Wx4’Lx3/16”Thick

Dowel PinsPart Description 60883 •1-1/2”Lx1/2”Diameter •Packageof8

Build Your Own Teak Louvered Door

Teak Grate And Framing Material DimensionsPart Description A B C

60862 1/2”GratingMaterial 15/32” 1/2” 15/32”

60875 1/2”FlatGratingMaterial 15/32”

60887 1/2”FramingMaterial 1-3/4” 15/32”

60863 3/4”GratingMaterial 11/16” 3/4” 11/16”

60876 3/4”FlatGratingMaterial 11/16”

60888 3/4”FramingMaterial 2-3/4” 11/16”

60864 1”GratingMaterial 15/16” 1” 15/16”

60877 1”FlatGratingMaterial 15/16”

60889 1”FramingMaterial 2-3/4” 15/16”

Grating & Framing Materials Available in 4’ Lengths Only

Cockpit GrateMaterial Dimensions

A

Flat Grating Material

A

Grate FrameMaterial

A

B

C

A

Grating Material

C

Teak LumberPart Thickness Width Length

60808 3/8” 5-3/4” 12”

60809 3/8” 5-3/4” 36”

60810 3/8” 5-3/4” 60”

60811 1/2” 1-3/4” 30”

60812 1/2” 1-3/4” 36”

60813 1/2” 1-3/4” 72”

60814 7/8” 7/8” 30”

60815 7/8” 1-3/4” 48”

60816 7/8” 3-3/4” 12”

60817 7/8” 3-3/4” 3-7/8”

60818 7/8” 4” 36”

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Louvered Door Material

Teak Lumber

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Grate Frame MaterialGrating MaterialFlat Grating Material

26 27

Compass RackPart Description 60461 •Inside:3-1/2”Wx3-1/2”Hx1-5/8”D •Outside:4-1/4”Wx4-1/8”Hx2-1/4”D •Pre-drilledmountingholes

Binocular RackPart Description 62702 •Inside:7-7/8”Wx4-3/8”Hx2-7/8”D •Outside:8-3/4”Wx4-7/8”Hx3-1/2”D •Fullcolorretailpackaging

Large Binocular RackPart Description 62704 •Inside:8-1/2”Wx4-3/4”Hx3-5/8”D •Outside:9-1/4”Wx5-1/8”Hx4-1/4”D •Designedforcompassmodels •Fullcolorretailpackaging

Cell Phone RackPart Description 62710 •Outside3-1/4”Wx6”Hx2-3/16”D

Handheld VHF/GPS RackPart Description 62708 •Outside3-7/8”Wx6”Hx3-1/8”D

Large Handheld VHF/GPS RackPart Description 62706 •Outside:4-1/2”Wx6”Hx4-3/8”D

Racks

Curved Two Drink RackPart Description 63218 •12”Wx3”Hx5”D •Holdstwoglasses,cansorbottles •2-7/8”drinkcut-outs •Pre-drilledmountingholes •Use61395steeringpedestalclamptomount to7/8”and1”pedestalguardtubing

Curved Four Drink RackPart Description 63219 •17-3/8”Wx2-7/8”Hx6”D •Holdsfourglasses,cansorbottles •2-7/8”drinkcut-outs •Pre-drilledmountingholes •Use61395steeringpedestalclamptomount to7/8”and1”pedestalguardtubing

Four Bottle/Glass HolderPart Description 62555 •22-1/4”Wx4-1/2”Hx4-1/2”D •Willholdbottles,insulatedcanholdersor tumbler-typeglasses

4 Glass Holder w/TrayPart Description 60218 •14-1/4”Wx3-1/2”Hx4”D •Holdsglasses,bottlesorcans

Drink Racks

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Drink Racks Drink Racks

Folding Drink HolderPart Description 62601 •Closed: 4-1/2”Wx3-3/4”Hx1-1/2”D •Fullcolorretailpackaging

Folding Insulated Drink HolderPart Description 62602 •Closed: 5-1/4”Wx3-3/4”Hx1-3/4”D •Holdscanininsulateddrinkholder

Two-Drink RackPart Description 62610 •7-1/2”Wx3-1/2”Hx3-5/8”D •Holdstwocansorbottles

Two Insulated Drink RackPart Description 62612 •8-7/8”Wx4”Hx4-1/2”D •Largeropeningsholdtwocansininsulated drinkholders,cupsorbottles

Two Insulated Drink/Binocular Rack w/ TrayPart Description 62616 •13”Wx3-3/4”Hx4-5/8”D •Largerholesizeholdstwoinsulated cansoronepairofbinoculars

Three Mug RackPart Description 62410 •11-1/8”Wx3-1/2”Hx4-1/8”D •Holdsmugsorcansininsulated drinkholders

Four Drink/Binocular RackPart Description 62632 •14-3/8”Wx3-3/4”Hx3-7/8”D •Holds4cansorbottles,or2drinks andonepairofbinoculars •Fullcolorretailpackaging

Four Insulated Drink/Binocular RackPart Description 62634 •16-1/2”Wx3-1/2”Hx4”D •Largerholeshold4glassesorcansin insulateddrinkholdersor2glassesorcansin insulateddrinkholdersandonepair ofbinoculars •Fullcolorretailpackaging

Three Insulated Drink/Bottle RackPart Description 62624 •13”Wx4”Hx4-3/4”D •Largerholeshold3glassesorcansin insulateddrinkholders

28 29

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Grate Top Fold-Away TablePart Description 60030 •Solidbrasshardware •Open:17-3/4”squarex18-1/2”H •Closed:17-3/4”Wx23”Hx2-3/4”D •Quickset-upandfoldsforstorage •Oiledfinish

Butler’s Table Part Description 60018 •Solidteakwithbrasshinges •Outeredgesfolduptoformhandles •Tabletopiseasilyremovedforuseasa servingtray •Measures: 37-1/4”Wx30”D(topopen)x21”H •Someassemblyrequired, brasshardwareincluded •Oiledfinish

Small Adjustable Slat Top TablePart Description 60028 •Top:19-3/4”Wx16”D •Height:14”or17-3/4” •Folded:16”Wx24-1/2”H •Oiledfinish

Large Adjustable Slat Top TablePart Description 60029 •Top:35-1/2”Wx27-5/8”D •Height:23”or27-1/2” •Folded:27-5/8”Wx43”H •Oiledfinish

Toopenthetable,lifttheleavesandrotate90°

Tables

Both tables feature a solid teak, under table locking height

adjustment mechanisim.

Tables

Grooved Top Fold-Away Table/StoolPart Description 60034 •Solidbrasshardware •Open:10-3/4”Wx11-3/4”Hx9-3/4”D •Closed:10-3/4”Wx14”Hx2-3/8”D •Quickset-upandfoldsforstorage •Oiledfinish

Cockpit Grate End TablePart Description 60020 •20”Wx18”Hx16”D •Assemblyrequired •Oiledfinish

Solid Top Fold-Away TablePart Description 60031 •Solidbrasshardware •Open:17-3/4”squarex18-1/2”H •Closed:17-3/4”Wx23”Hx2-3/4”D •Quickset-upandfoldsforstorage •Oiledfinish

Drop Leaf TablePart Description 60055 •TopOpen:27-3/4”Wx20-1/2”Hx18-1/2”D •DropLeavesDown: 18-1/2”Wx20-1/2”Hx10-5/8”D •Oiledfinish

30 31

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

Seating

FoldDownFootRest

Director’s ChairPart Description 60041 ChairWithBlueSeatCovers60044 ChairWithNaturalSeatCovers60040 ChairWithoutSeatCovers •Solidbrasshardware •100%cottoncanvasseatcovers •18”highfromfloortoseat •Foldsforeasystorage •Oiledfinish

Captain’s ChairPart Description 60045 ChairWithBlueSeatCovers60048 ChairWithNaturalSeatCovers60039 ChairWithoutSeatCovers •Solidbrasshardware •100%cottoncanvasseatcovers •30”highfromfloortoseat •Foldsforeasystorage •Oiledfinish

Glider ChairPart Description 60097 •24”Wx40”Hx31”D •Smoothglidingmotion •Contouredseatandback •Chairslatsarespacedclosetogether forcomfortandsupport •Oiledfinish

32

Made of the �nest teak lumber certi�ed by the government of Thailand as harvested from m

anag

ed fo

rests

.

©2014 Whitecap Industries, Inc. (0814) ©2014 Teak Photography HSD, Inc.Printed in the USA with Soy Ink on Recycled Paper

WhitecapIndustries,Inc.131EthelRoadWestSuite#5Piscataway,NJ08854

Phone:732-819-4666Fax:732-819-3559

E-mail:info@whitecapindustries.net

www.WhitecapTeak.com