TECE flushing technology Assortment List - Instalaţii de ... · 7.5 l 6.0 l 4.5 l 3.0 l 6...

1

TECE flushing technology Assortment List

TECE – International

AustriaTECE GmbHIgelschwang 10A - 3313 WallseePhone: +43-160 463 060Fax: +43-160 463 [email protected]

Belarus TECE Belarusul.Orlovskaja 40a, Office 33BY - 220053 MinskPhone: +375-17 239 22 73Fax: +375-17 239 22 [email protected]

BelgiumTECE BELGIUM BVBA-SPRLAvenue Pasteur 6HBE - 1300 WavrePhone: +32-2 401 61 37Fax: +32-2 401 61 [email protected]

CroatiaTECE Trgovina d.o.oFallerovo setaliste 16HR - 10000 ZagrebPhone: +38-513 079 000Fax: +38-513 079 [email protected]

FranceTECE France S.A.R.L.5, rue Jean RostandF - 69740 GenasPhone: +33-437 453 810Fax: +33-437 454 [email protected]

ItalyTECE Italia srl.Via dell’Industria, 24/AIT - 41051 Castelnuovo Rangone (MO)Phone: +39-0 595 334 011Fax: +39-0 595 334 [email protected]

LithuaniaTECE Baltikum UABSavanoriu pr 339 bLT - 52010 KaunasPhone: +37-037 314 078Fax: +37-037 313 [email protected]

NetherlandsTECE Nederland GmbHW.A. Scholtenweg 7 aNL - 9422 BR SmildePhone: +31-592 415 074Fax: +31-592 414 [email protected]

NorwayPROBATA ASTømteveien 12NO - 1410 KolbotnPhone: +47-66 82 33 00Fax: +47-66 82 33 [email protected]

PolandTECE Sp. z o.o.Wroclawska 61PL - 57-100 StrzelinPhone: +48-713 839 100Fax: +48-713 839 [email protected]

RomaniaTECE Romania SRLSoseaua de Centura, nr. 43-45RO - 077040 Chiajna, IlfovPhone: +40-21 203 47 08Fax: +40-31 030 47 [email protected]

RussiaOOO TECE Sytemsul. MITINSKAYA 30, build. 6, 3d. floor,RU - 125430 MoskauPhone: +7-495-988 07 94Fax: +7-495-988 07 [email protected]

Spain TECE Haustechnik, S.L.Enrique Mariñas, 36-5° Oficina 2Edificio Torre de CristalE - 15009 A CoruñaPhone: +34-881 89 50 25Fax: +34-881 89 50 [email protected]

Switzerland TECE Schweiz AGGewerbestrasse 8CH - 8212 Neuhausen am RheinfallPhone: +41-52 672 62 20Fax: +41-52 672 62 [email protected]

UkraineTOV TECE Ukraine18 Malins’ka Str.UA - 03680 Kyiv Phone: +38-044 450 17 24Fax: +38-044 450 17 [email protected]

2

3

Table of contents

PageTECEprofil / TECE flushing systemProduct description 6

Table of contents 7

Expert reports / certificates 50

TECEbox

Product description 52

Table of contents 53

TECEbox 8 cm



TECE push plates



Quick search for articles 103–105

4

TECEprofil Assortment List

TECEprofil pre-wall technology

TECEprofil is a pre-wall wall system that has proved its value over a period of many years. The trend-setting assembly method using section tubes and cor-ner joints is, like every good idea, simple and practical, and has not changed over the years.The four basic components and accessories can also be used to implement unusual bathroom plans. This means that there are hardly any limits to the customer’s and the planner’s imagination.

TECEprofil – system advantages:Cleaner and faster than traditional brick-wall construction �One-stop guarantee �Ideal sound insulation �“Open system” – toilet modules with cisterns from �

TECE, Geberit and DAL

TECEprofil – assembly advantages: Generous dimension tolerances when cutting section rods to �

lengthSimple to assemble with no special tools �Structural tolerances can be offset using angle brackets �

Sensible investment and environmental awareness with the TECE cisternSave water with a real 4.5 litre flush and dual flush technology

Huge amounts of water and energy are currently wasted with outdated technology. The newly developed drain valve for the TECE cistern offers the solution here: The combination of dual and economy flush enables water savings of more than 50 per-

For its water-saving technologyand functional design the new TECE valve was awarded the "Design Plus" prize 2009.

cent - compared to most conventional flushing technologies with six to nine litres. The fitter chooses between 4.5/6/7.5 and 9 litres for the full flush, while the economy flush of 3 litres remains constant.

Full flush: 4.5/6/7.5 and 9 litresEconomy flush: 3 litres

9.0 l

10 l

7.5 l

6.0 l

4.5 l

3.0 l

6

TECEprofil – product description

Page

Basic components 8

Toilet modules 9–14

Modules for washlet 15–16

Toilet connection units 17

Washstand modules 18–19

Washstand connection units 20–21

Urinal modules 22

Urinal connection units 23

Bidets and showers 24–25

Fitting connections 26–27

Safety support arms and mounting plates 28

Module attachments 29–30

Supporting frame accessories 31–33

Flushing technology accessories 34

Panel facing 35

Starter kit 36

Spare parts case 36

Spare parts 37–49

Expert reports and certificates 50

7

TECEprofil – table of contents

Notes:

Delivery unit 1 (DU1) = Minimum order quantity per item; sometimes it is not possible to order smaller quantities for technical reasons Delivery unit 2 (DU2) = Euro-pallets for modules

TECEprofil section tubeTo create a supporting framework to take TECEprofil structural com-ponents. Made of rolled steel, welded, galvanised.

WG 900 | RG 3

Order No. DU1 DU2 DU39.000.000 18 m 630 m 1890 m

TECEprofil corner jointTo ensure a solid, right-angled connection with TECEprofil section tubes. Pre-assembled unit made of galvanised steel.M5 socket head screw (SW3) and compression spring.

WG 900 | RG 3

Order No. DU1 DU2 DU39.010.002 30 pcs. 240 pcs. 1440 pcs.

TECEprofil angle bracketTo fix the TECEprofil section tubes to the structure. Pre-assembled galvanised steel unit including mounting materials.Optional: TECEprofil sound-insulation kit for angle bracket

WG 900 | RG 3


TECEprofil double jointTo mount two TECEprofil section tubes to the structure simultane-ously. For supporting structure heights of 140 mm to 220 mm. Pre-assembled galvanised steel unit including mounting materials.Optional: TECEprofil sound-insulation kit for angle bracket

WG 900 | RG 3


TECEprofil double joint, long versionTo mount two TECEprofil section tubes to the structure simultane-ously. For duct and supporting frame depths of 220 to 300 mm. Pre-assembled galvanised steel unit including mounting materials.Optional: TECEprofil sound-insulation kit for angle bracket

WG 900 | RG 3

Order No. DU1 DU2 DU39.030.013 2 pcs. 10 pcs. --

TECEprofil sound-insulation kit for angle bracketFor sound insulation of the angle brackets at the structural body

WG 900 | RG 3


8

TECEprofil – basic components

TECEprofil toilet module with TECE cistern,front actuation, assembly height 1120 mm

For fitting to TECEprofil section tubes or for installation in metal or wooden post-and-beam walls and as a pre-wall installation or corner module; also suitable for single block assembly.

For toilet flush handle and TECE push plates.

Fully pre-assembled unit consisting of:

TECE flush-mounted cistern with front actuation: Safety tank made of impact-resistant plastic �Cistern fully pre-assembled and sealed �Corner valve and cistern connection pre-assembled, cistern �

connection with 1/2” female thread 10-litre tank volume; 6-litre preset standard flush volume; �

4.5/7.5/9-litre flush volume can be set at any time; 3-litre part-flush with dual flush technology. Residual volume available for immediate cleaning rinse

Insulated against condensation water �Can be set as a single or dual flush cistern depending on the �

push plate usedTested in accordance with DIN 19542 - test certificate �

7391275-01z. Fitting group 1 in accordance with DIN 4109 - test certificate �

P-IX3837/ILow-noise hydraulic fill valve <= 17 dB(A) at a flow pressure of �

3 bar

Module consisting of:

Self-supporting assembly frame with powder-coated surface �Two M12 retaining bolts and M12 nuts �DN 90 toilet drain bend with DN 90/100 reducer, material PP �Reducer is also suitable for horizontal installation �DN 90 toilet connection set, including protective plug �

Heightened ceramic mounting for 48 cm seat height in accordance with DIN 18024-2 is possible. (DIN 18024-2: Barrier-free construc-tion - Part 2: Publicly accessible buildings and workplaces).

Please order separately:Toilet push plate (see push plates) �Fitting for individual pre-wall installation, corner or wooden �

post-and-beam structures (see page 29 ff.)

WG 905 | RG 3

Order No. DU1 DU2 DU39.300.000 1 pc. 10 pcs. 60 pcs.

The cistern for the toilet flush handle

9

TECEprofil – toilet modules

10


TECEprofil toilet module with TECE cistern; For top or front actuation, assembly height 980 mm

For installation in a TECEprofil pre-wall installation or in front of a solid wall.


Fully pre-assembled unit consisting of:TECE flush-mounted cistern for top or front actuation:

Safety tank made of impact-resistant plastic �Cistern fully pre-assembled and sealed �Corner valve and cistern connection pre-assembled. �

Corner connection with 1/2“ female thread 10-litre tank volume; 6-litre preset standard flush volume; �



cistern usedTested in accordance with DIN 19542 - test certificate �

7391275-01z.Fitting group 1 in accordance with DIN 4109 - test certificate �

P-IX3837/ILow-noise hydraulic fill valve <= 17 dB(A) at a flow pressure �

of 3 bar

Module consisting of: Self-supporting assembly frame with powder-coated surface �Two adjustable supports for floor projections of 0 – 200 mm �Two M12 retaining bolts and M12 nuts, �

180 or 230 mm fixing centresTwo depth-adjustable module attachments �DN 90 toilet drain bend with DN 90/100 reducer, material PP �

reducer is also suitable for horizontal installationDN 90 toilet connection set, including protective plug �

Please order separately:Toilet push plate (see push plates) �

Caution: If the push plate is fitted front and a compact ceramic system is used in the case of cisterns with a low assembly height, the toilet lid may occasionally drop down unintentionally. Use only when com-pact ceramic systems are used (e.g.: Ideal-Standard: San Remo slimline R 3493; V&B: Viala 765310, Viala 765210; Keramag: Renova-Comprimo 204550; Joly 203060), fit push plate with top actuation only.

WG 905 | RG 3



11


TECEprofil toilet module with TECE cistern, top or front actuation, assembly height 820 mm

For fixing to TECEprofil section tubes or as a pre-wall installation or corner module.


Fully pre-assembled unit consisting of:TECE flush-mounted cistern for top or front actuation:

Safety tank made of impact-resistant plastic �Cistern fully pre-assembled and sealed �Corner valve and cistern connection pre-assembled �Corner connection with 1/2“ female thread �Hydraulically optimised cistern for low assembly heights �10-litre tank volume; 6-litre cistern in accordance with DIN �

19542; 4.5/7.5/9-litre flush volume can be set at any time; 3-litre part-flush with dual flush technology. Residual volume available for immediate cleaning rinse.

Can be set as a single or dual flush cistern depending on the � push plate used

Depending on assembly, it can be used with top or front flush � controls

Tested in accordance with DIN 19542 - test certificate � 7391275-02

Fitting group 1 in accordance with DIN 4109 - test certificate � P-IX3837/I

Low-noise hydraulic fill valve <= 17 dB(A) at a flow pressure � of 3 bar

Module consisting of: Self-supporting assembly frame with powder-coated surface �Two M12 retaining bolts and M12 nuts �DN 90 toilet drain bend with DN 90/100 reducer, material PP �Reducer is also suitable for horizontal installation �DN 90 toilet connection set, including protective plug �Two depth-adjustable module attachments �


Caution: If the push plate is fitted front and a compact ceramic system is used in the case of cisterns with a low assembly height, the toilet lid may occasionally drop down unintentionally. Use only when com-pact ceramic systems are used (e.g.: Ideal-Standard: San Remo slimline R 3493; V&B: Viala 765310, Viala 765210; Keramag: Renova-Comprimo 204550; Joly 203060), fit push plate with top actuation only.

WG 905 | RG 3



12


TECEprofil toilet geronto module as a modular system, with TECE cistern, front actuation, ceramic mounting for seat height of 48 cm in accordance with DIN 18024-2, assembly height 1120 mm For the installation to TECEprofil section tubes or to flush-mounted profile walls or in front of a solid wall. Toilet module for barrier-free construction with raised ceramic mounting. Module with lateral steel frames and conduits for cable laying. Including mounting material.

Suitable for all TECE push plates, toilet electronics and toilet flush handles.

Partly assembled unit consisting of:TECE flush-mounted cistern with front actuation:

Safety tank made of impact-resistant plastic �Cistern fully pre-assembled and sealed �Corner valve and cistern connection pre-assembled. �

Corner connection with 1/2“ female thread 10-litre tank volume; 6-litre preset standard flush volume; �




7391275-01z Fitting group 1 in accordance with DIN 4109 - test certificate �

P-IX3837/ILow-noise hydraulic fill valve � ≤ 17 dB(A) at a flow pressure

of 3 bar

Module consisting of: Self-supporting assembly frame with powder-coated surface �Two adjustable supports for floor projections of 0 – 200 mm �Two M 12 retaining bolts and M 12 nuts, �

180 or 230 mm fixing centresTwo depth-adjustable module attachments �Four multi-clips for attachment to a TECEprofil wall �Lateral steel frames to hold the steel plate sets �DN 90 toilet drain bend with DN 90/100 reducer, material PP �


Please order separately:Steel plate set to hold the safety support arms (9.042.01x) �Toilet electronics (such as TECEplanus toilet remote triggering) �Toilet push plate (see push plates) �

Caution: Suitable steel plate set to hold the safety support arms have to be ordered separately!

WG 905 | RG 3


The cistern for the flush handle

13


Steel plate set TECEprofil to hold the safety support arms

Consisting of two steel plates including fastening material for installation to toilet geronto module, order No. 9.300.007.

Order No. Manufacturer Type9.042.010 Erlau

HewiKeucoLinidoNormbauPressalit

OvalgripLifesystem, 801/805Collection PlanLI2601 CombiLine, NylonLine, StainlessLineCare R3016-RF016, R3018-RF018

9.042.011 ErlauFrelu

Linido

Economy, Variogrip Premium10.052.00, 10.053.0010.052.01, 10.053.0110.054.00, 10.055.0010.054.01, 10.055.0110.074.00, 10.075.00LI2603

9.042.012 LehnenPBASAM

Evolution4CN4450000/4CN445000Rfree line

9.042.013 AMSDeubadEmcoFrelu

Lehnen

A and B seriesMaxima series5785 262 8210.036.01, 10.037.0110.056.00, 10.057.0010.056.01, 10.057.0110.056.02, 10.057.0210.056.03, 10.057.0310.058.00, 10.058.01, 10.058.02Function

WG 905 | RG 3

Order No. DU1 DU29.042.010 1 pc. 10 pcs.9.042.011 1 pc. 10 pcs.9.042.012 1 pc. 10 pcs.9.042.013 1 pc. 10 pcs.

14

TECEprofil toilet module with TECE cistern, with connection for odour extraction, assembly height 1120 mm

Design like 9.300.000, however with connection for odour extraction (DN 70).

Matching fans, e.g.:Maico ER 100 �Lunos Skalar-2SG �

WG 905 | RG 3


TECEprofil toilet module with TECE cistern, for toilet ceramics with reduced seat surface (e.g. V&B: Momento, Sentique, Subway 2.0), assembly height 1120 mm

Design like 9.300.000, however with additional vertical reinforce-ment braces in the lower area.

WG 905 | RG 3





15

TECEprofil – modules for washlet

Toilet module TECEprofil with TECE cistern, for TOTO Neorest LE/SE washlet, assembly height 1120 mm

For fitting to TECEprofil section tubes or for installation in metal or wooden post-and-beam walls and as a pre-wall installation; also suitable for single block assembly.

Fully pre-assembled unit consisting of:TECE flush-mounted cistern with front actuation:

Safety tank made of impact-resistant plastic �Cistern fully pre-assembled and sealed �Corner valve and cistern connection pre-assembled, cistern �

connection with 1/2” female thread 10-litre tank volume; 6-litre preset standard flush volume; �



push plate usedTested in accordance with DIN 19542 - test certificate �


P-IX3837/ILow-noise hydraulic fill valve � ≤ 17 dB(A) at a flow pressure

of 3 bar

Module consisting of:

Self-supporting assembly frame with powder-coated surface �Two M12 retaining bolts and M12 nuts �DN 90 toilet drain bend with DN 90/100 reducer, material PP �

reducer is also suitable for horizontal installationDN 90 toilet connection set, including protective plug �Pre-mounted control cable for automatic flush triggering �

with TOTO Neorest washletPre-mounted hollow-wall box for power connection of the �

washletPre-mounted retaining plate for water connection of the washlet �1/2" x 1/2" wall disk including sound insulation �Two depth-adjustable wall attachments �

Heightened ceramic mounting for 48 cm seat height in accordance with DIN 18024-2 is possible. (DIN 18024-2: Barrier-free construction - Part 2: Publicly accessible buildings and workplaces).


Country-specific TOTO modules on request.

WG 905 | RG 3



16

TECEprofil – modules for washlet

TECEprofil upgrade set for washlet top frames

Sound-insulated shell set for installation to all TECEprofil dry-wall modules; suitable for pre-mounted water and power connection for washlet top frames, such as TOTO Washlet GL, Geberit AquaClean 4000/5000/5000plus.

Shell set consisting of:Hollow-wall mounting box �Retaining plate for hollow-wall mounting box �1/2" x 1/2" wall disk including sound insulation �Retaining plate for wall disk �Fastening screws �

WG 900 | RG 3

Order No. DU1 DU2 DU39.880.037 1 pc. -- --

TECEprofil upgrade set for wall-hung washlets

Shell set for mounting a washlet to TECEprofil dry-wall modules; suitable for Geberit AquaClean 8000/8000plus.

Shell set consisting of:Conduit with quick connectors �Replacement reinforced hose for cistern �Flush mounting box �Retaining plate for flush mounting box �Retaining plate for water connection �Fastening screws �

Caution:Only for TECE toilet modules, assembly height 1120 mm!

WG 900 | RG 3


17

TECEprofil toilet connection unit with TECE cistern, front actuation


Consisting of:TECE flush-mounted cistern with front actuation:

Safety tank made of impact-resistant plastic �Cistern fully pre-assembled and sealed �Corner valve and cistern connection pre-assembled �Cistern connection with 1/2” female thread �10-litre tank volume; 6-litre preset standard flush volume; �





P-IX3837/ILow-noise hydraulic fill valve <= 17 dB(A) at a flow pressure �

of 3 bar 180 or 230 mm crossbeams for attaching the toilet �Two M 12 retaining bolts and M 12 nuts �Two adjustable supports for floor projections of 0 – 200 mm �DN 90 toilet drain bend with DN 90/100 reducer, material PP �



WG 905 | RG 3


TECEprofil toilet connection unit for brick-wall construction cistern

To fit brick-wall construction cisterns into a TECEprofil pre-wall installation. Suitable for Geberit "Kombifix assembly element for wall-mounted toilet", Sanit "Assembly Element 980" and Jomo "Jomofix" elements.

Connection unit consisting of powder-coated supporting feet and spacer. Height adjustment of the wall is possible by means of brick-wall construction cistern only.

Caution: Cannot be fitted to free-standing walls.

Please order separately:Brick-wall construction cistern �

WG 900 | RG 3

Order No. DU1 DU2 DU39.020.016 Sale 1 pc. -- --


TECEprofil – toilet connection units

18

TECEprofil washstand module, assembly height 1120 mm

For fitting to TECEprofil section tubes - or for installation in metal or wooden post-and-beam walls and as a pre-wall installation or corner module.

Fully pre-assembled unit, consisting of:

Self-supporting assembly frame with powder-coated surface �Two M10 retaining bolts, height and side adjustable spacing �Protective plug �Sound-insulated mounting crossbeams to affix wall disks �DN 40/50 connecting elbow with NW 30/50 rubber collar �

(also serves as a seal), incl. protective plug

Please order separately:TECEflex wall disks 16 x 1/2”- order no. 9.021.015, �

TECE 1/2” x 1/2” - order no. 9.021.017 or TECElogo 16 x 1/2”- order no. 9.021.020 (page 27)

Fitting for individual pre-wall installation, corner or wooden � post-and-beam structures (see page 29 ff.)

Mounting crossbeam for flush-mounted and external fittings � 9.020.041 (page 26)

WG 900 | RG 3


TECEprofil washstand module, assembly height 980 mm

For fitting to TECEprofil section tubes or for installation in metal or wooden post-and-beam walls and as a pre-wall installation or corner module.

Fully pre-assembled unit consisting of:

Self-supporting assembly frame with powder-coated surface �Two M10 retaining bolts, height and side adjustable spacing �Protective plug �Sound-insulated mounting crossbeams to affix wall disks �DN 40/50 connecting elbow with NW 30/50 rubber collar �





WG 900 | RG 3


TECEprofil – washstand modules

19

TECEprofil – washstand modules

TECEprofil washstand module with flush-mounted odour trap, assembly height 1120 mm


For construction of washstand units with a ground clearance in accordance with DIN 18024-2 (Barrier-free construction - Part 2: Publicly accessible buildings and workshops)

Fully pre-assembled unit consisting of:Self-supporting assembly frame with powder-coated surface �Two M10 retaining bolts, height and side adjustable spacing �Protective plug �Sound-insulated fitting crossbeam for the attachment of wall �

panes, borehole gauges 80, 120, 150, 200 mmDN50 flush-mounted odour trap with removable NW 30 siphon �

insert (serves as seal at the same time)



Connection pipe for U-bend/washstand to be supplied by � customer (e.g. Dallmer 1-14000 5)

Fitting for individual pre-wall installation, corner or wooden � post-and-beam structures (seepage 29 ff.)

Mounting crossbeam for flush-mounted and external fittings � 9.020.041 (page 26)

WG 900 | RG 3


TECEprofil washstand module for sink, assembly height 1120 mm


Fully pre-assembled unit consisting of: Self-supporting assembly frame with powder-coated surface �Water-tight glued mounting plate made of structural veneer in �

accordance with DIN 68 705Protective plug �Mounting crossbeam for the attachment of external fittings �DN 40/50 connecting elbow with NW 30/50 rubber collar �





WG 900 | RG 3


20

TECEprofil – washstand connection units

TECEprofil connection unit for washstand

Sound-insulated crossbeam made of galvanised steel, for cus-tomer installation of wall disks, with pre-assembled DN 50/40 drain bend, NW 30/50 rubber sleeve, marking plug, fastening material for the attachment to TECEprofil section tubes, 2 x M10 fastening clips and washstand attachments.



WG 900 | RG 3

Order No. DU1 DU2 DU39.020.033 1 pc. 10 pcs. --

TECEprofil connection unit for washstand incl. TECEflex or TECElogo 16 x 1/2" wall disks

Sound-insulated crossbeam made of galvanised steel, for cus-tomer installation of wall disks, with pre-assembled DN 50/40 drain bend, NW 30/50 rubber sleeve, marking plug, fastening material for the attachment to TECEprofil section tubes, 2 x M10 fastening clips and washstand attachments.

WG 900 | RG 3

Order No. DU1 DU2 DU39.020.018 w. WD TECEflex 16 x 1/2“ 1 pc. 10 pcs. --9.020.044 w. WD TECElogo 16 x 1/2“ 1 pc. 10 pcs. --

TECEprofil connection unit for washstand with flush-mounted odour trap

Sound-insulated crossbeam made of galvanised steel, for cus-tomer installation of wall disks, with pre-assembled DN 50 flush-mounted odour trap, removable NW 30 siphon insert (serves as seal at the same time), including marking plug, fastening material for the attachment to TECEprofil section tubes, 2 x M10 fastening clips and washstand attachments.



Connection pipe for U-bend/washstand to be supplied by � customer (e.g. Dallmer 1-14,000 5)

WG 900 | RG 3


21

TECEprofil – washstand connection units

TECEprofil washstand support for the installation in metal or wooden post-and-beam walls

Pre-assembled unit consisting of: Assembly frame with powder-coated surface �Two M10 retaining bolts, height and side adjustable spacing �Fitting connection crossbeam �DN 40/50 connecting elbow with NW 30/50 rubber collar, �

marking plug



WG 900 | RG 3


22

TECEprofil urinal module with TECE flush valve housing

To take manual and electronic actuation systems. For fitting to TECEprofil section tubes or for installation in metal or wooden post-and-beam walls and as a pre-wall installation or corner module.

Fully pre-assembled unit consisting of:TECE urinal flush valve housing with inlet flow control and bare �

wall protection systemTwo adjustable supports for floor projections of 0–200 mm �Two M10 retaining bolts �Continuously adjustable fixing rails �Continuously height-adjustable drain connection �DN 50 drain bend including marking plug �Fixing material for urinal �Inlet fittings �

Please order separately: Manual actuation or electronics (see page 75 ff.) �Fitting for individual pre-wall installation, corner or wooden �

post-and-beam structures (seepage 29 ff.)

Caution:Not suitable for recessed urinals, e.g. Keramag Joly and Visit

WG 905 | RG 3


TECEprofil urinal module for external flush valve

To take external flush valves. For fitting to TECEprofil section tubes or for installation in metal or wooden post-and-beam walls and as a pre-wall installation or corner module.

Fully pre-assembled unit, consisting of:Self-supporting assembly frame with powder-coated surface �Two adjustable supports for floor projections of 0 – 200 mm �Two M8 retaining bolts �Continuously adjustable fixing rails �Continuously height-adjustable drain connection �DN 50 high-temperature drain bend including protective plug �Fixing material for urinal �

Please order separately: Fitting for individual pre-wall installation, corner or wooden �

post-and-beam structures (see page 29 ff.)

WG 900 | RG 3


TECEprofil – urinal modules

23

TECEprofil – urinal connection units

TECEprofil connection unit for urinal with TECE flush valve housing

To take manual and electronic actuation systems.

Fully pre-assembled unit consisting of:Sound-insulated galvanised steel crossbeam �TECE urinal flush valve housing with inlet flow control and bare �

wall protection system1/2” x 1/2” fitting connection �3 x M8 fixing brackets �Urinal attachment �Inlet fittings �

Please order separately: Manual actuation or electronics (see page 75 ff.) �

WG 905 | RG 3


TECEprofil connection unit for Keramag, Joly and Visit urinal with TECE flush valve housing

To attach recessed urinals to a TECEprofil wall. Top, left or right actuation to suit.

Consisting of:TECE urinal flush valve housing with inlet flow control and bare �

wall protection systemGalvanised steel retaining plate �M8 attaching bolts �DN 50 outlet odour trap with galvanised crossbeam �

Please order separately: Manual actuation (see page 75 ff.) �“Kerafix” and plumbing connection: see Keramag �

WG 905 | RG 3


24

TECEprofil – bidets and showers

TECEprofil bidet module for wall-mounted bidet, assembly height 1120 mm


Fully pre-assembled unit consisting of: Self-supporting assembly frame with powder-coated surface and �

two adjustable supports for floor projections of 0 – 200 mmTwo M12 retaining bolts and M12 nuts �Continuously height-adjustable drain connection �DN 40/50 connecting elbow with NW 30/50 rubber collar �

(also serves as a seal), including protective plug




WG 900 | RG 3


TECEprofil bidet module for wall-mounted bidet, assembly height 820 mm


Fully pre-assembled unit, consisting of:

Self-supporting assembly frame with powder-coated � surface and two adjustable supports for floor projections of 0 – 200 mm

Two M 12 retaining bolts and nuts �Continuously height-adjustable drain connection �DN 40/50 connecting elbow with NW 30/50 rubber collar �

(also serves as a seal), including protective plugTwo depth-adjustable module attachments �

In combination with telescopic attachment 9.380.001, it can be fitted in a TECEprofil pre-wall installation for assembly height 980 mm.

Please order separately:Fitting for corner or wooden post-and-beam structures �

(see page 29 ff.)TECEflex wall disks 16 x 1/2”- order no. 9.021.015, �


TECEprofil telescopic attachment for modules, 9.380.001 � (see page 29)

WG 900 | RG 3


25

TECEprofil – bidets and showers

TECEprofil bath/shower module for flush-mounted and external fittings, assembly height 1120 mm

To take external or flush-mounted fittings. For fitting to TECEprofil section tubes or for installation in metal or wooden post-and-beam walls and as a pre-wall installation or corner module.

Fully pre-assembled unit consisting of:Self-supporting assembly frame with powder-coated surface �Two adjustable supports for floor projections of 0 – 200 mm �Continuously adjustable crossbeam to take flush-mounted �

fittings or wall disks

WG 900 | RG 3


26

TECEprofil fitting cross-beams for flush-mounted and external fittings

Galvanised steel crossbeams for the customer to assemble flush-mounted or external fittings, including fixing material, to TECEprofil section tubes or for installation in metal or wooden post-and-beam walls. Fits Hansa Varox, Hansgrohe i-box and Kludi Flex-Box, for instance.



WG 900 | RG 3


TECEprofil mounting crossbeam for flush-mounted and external fitting for subsequent installation in washstand modules

Galvanised steel crossbeams for the customer to assemble flush-mounted or external fittings, including fixing material, to TECEprofil section tubes or for subsequent installation in metal or wooden post-and-beam walls. Fits Hansa Varox, Hansgrohe i-box and Kludi Flex-Box, for instance.



WG 900 | RG 3


TECEprofil mounting plate for flush-mounted fittings

Continuously height-adjustable assembly plate to attach flush-mounted fittings and other appointments.

Fully pre-assembled unit, consisting of:Base plate made of watertight, glued structural veneer in �

accordance with DIN 68705Mounting elbow, galvanised �Four multi-clips �

WG 900 | RG 3


TECEprofil connection unit for stop valve and water meter

Holder to firmly retain standard commercial stop valves and water meters using pipe clips; continuously adjustable in terms of spacing, depth and height.

Fully pre-assembled unit, consisting of:Two pipe clips with sound-insulated rubber �Fixing material for fitting to TECEprofil section tubes �

WG 900 | RG 3


TECEprofil – fitting connections

27

TECEprofil – fitting connections

TECEprofil connection unit for washing machine

For horizontal or vertical incorporation into a TECEprofil supporting frame.

Consisting of:Galvanised steel crossbeams to attach U-bend and wall disk �In-built U-bend for washing machine, DN 40/50 �Chromed hose connection �Chromed anchor plate �Fixing material for attachment to a TECEprofil brace �



�

WG 900 | RG 3


TECEprofil fitting connection

To fit an individual tap connection to the TECEprofil supporting frame.

Fully pre-assembled unit, consisting of:Wall disk (WS) TECEflex 16 x 1/2", long type or �

wall disk TECE 1/2” x 1/2”, long type or wall disk TECElogo 16 x 1/2”, long type

Sound insulation from supporting frame �Self-adhesive seal collar to seal between panel and wall disk �Fixing material for fitting to TECEprofil section tubes �Cover plugs �

WG 900 | RG 3

Order No. DU1 DU2 DU39.020.020 WS TECEflex 16 x 1/2“ 1 pc. 6 pcs. --9.020.004 WS TECE 1/2“ x 1/2“ 1 pc. 6 pcs. --9.020.045 WS TECElogo 16 x 1/2“ 1 pc. 6 pcs. --

TECEprofil system wall disk

Long dry-wall wall disk for customer to mount with washstands, bidet and externally mounted fittings in the TECEprofil system.

Consisting of:Wall disk (WS) TECEflex 16 x 1/2”, long type or �

wall disk TECE 1/2” x 1/2”, long type or wall disk TECElogo 16 x 1/2”, long type

Self-adhesive seal collar to seal between panel and wall disk �Fixing material �Cover plugs �

WG 900 | RG 3

Order No. DU1 DU2 DU3 D d L9.021.015 WS TECEflex 16 x 1/2“ 1 pc. 20 pcs. 120 pcs. 1/2" female thread 16 mm TECEflex 82 mm9.021.017 WS TECE 1/2“ x 1/2“ 1 pc. 20 pcs. 120 pcs. 1/2" female thread 1/2" female thread 82 mm9.021.020 WS TECElogo 16 x 1/2“ 1 pc. 20 pcs. 120 pcs. 1/2" female thread 16 mm TECElogo 69 mm

28

TECEprofil module for safety support arms and support systems

For installation in a flush-mounted profile post-and-beam wall or as a pre-wall installation element.

Fully pre-assembled unit consisting of: Self-supporting assembly frame with powder-coated surface �Watertight, multi-glued structural veneer plate in accordance �

with DIN 68705Fixing material for attachment in a flush-mounted profile wall �

Please order separately:Depth-adjustable module attachment 9.380.000 for pre-wall installation (see page 29)

WG 900 | RG 3


TECEprofil mounting plate for safety support arms and support systems

For stable attachment of safety support arms and support systems in a TECEprofil supporting frame. Fully pre-assembled unit, consisting of:

Mounting plate to be screwed to a TECEprofil universal module, � made of watertight, glued structural veneer in accordance with DIN 68705

Two multi-clips for fixing to the TECEprofil supporting frame �

WG 900 | RG 3


TECEprofil mounting plate for additional appointments, 200 x 200 mm

Mounting plate for stable attachment of additional appointments, e.g. mirror cupboards, in a TECEprofil supporting frame.

Made of watertight, glued structural veneer in accordance with DIN 68705

WG 900 | RG 3


TECEprofil – safety support arms and attachment plates

29

TECEprofil – module attachments

Depth-adjustable TECEprofil module attachment

To attach modules to a solid structural wall, 180 or 230 mm fixing centres.

Consisting of: Two depth-adjustable module attachments �Fixing material �

WG 900 | RG 3


TECEprofil hanger bolts for solid walls

Module attachment using hanger bolts in front of solid walls. For supporting structure heights of 145 mm to 175 mm.

Consisting of: Two hanger bolts with dowels �Four flange nuts �

WG 900 | RG 3


TECEprofil telescopic attachment for modules

To extend the lateral module braces and to fix to a horizontal TECEprofil brace.

Consisting of: Two height-adjustable module attachments �Fixing material for fitting to TECEprofil section tubes �

WG 900 | RG 3


30

TECEprofil – module attachments

Height-adjustable TECEprofil module attachment for individual assembly

To attach TECEprofil modules to a solid or lightweight wall. Permits variable depth and height adjustment for storage surfaces.

Fully pre-assembled unit consisting of: Assembly crossbeam with galvanised surface �Two wall attachments, height-adjustable, for adjustment to tile �

pattern Mounting material for assembly in front of the wall �

WG 900 | RG 3


TECEprofil module attachment for variable corner assembly

To attach TECEprofil modules in front of a structural corner. Space-saving corner assembly, including fitting of downpipes, ventilation pipes or supply pipes behind the module, is an option with all modules.

Consisting of: Two wall attachments for corner assembly, variable elbow �Mounting material for assembly in front of the wall �

WG 900 | RG 3


TECEprofil module attachment for wall corner assembly

To attach TECEprofil modules at a 45° angle to a solid or lightweight wall. Only one side needs to be screwed to the wall.

Fully pre-assembled unit consisting of: Assembly crossbeam with galvanised surface, height �

adjust-able, for adjustment to tile patternGalvanised light weight wall profile to attach facing �Mounting material for assembly on the wall �

WG 900 | RG 3


31

TECEprofil – supporting structure accessories

TECEprofil mounting set for wooden post-and-beam walls

Fixing material to attach TECEprofil modules to lateral post-and-beam structures.

Consisting of: Four hexagonal head wood screws �Four washers �

WG 900 | RG 3


TECEprofil mounting set for flush-mounted profile walls

Fixing material to attach TECEprofil modules to lateral flush-mount-ed profiles. Suitable for flush-mounted 50 profiles in accordance with DIN 18182 Part 1.

Consisting of: Four bolts with nuts �Eight washers �

WG 900 | RG 3


TECEprofil universal joint

To connect TECEprofil section tubes at any angle. Pre-assembled unit made of galvanised steel.

WG 900 | RG 3


TECEprofil multi-clip

To fix non-system materials to TECEprofil section tubes.

Consisting of:M8 bolt and nut �Galvanised steel plates �

WG 900 | RG 3


SW13

32


TECEprofil M8 anchoring clip

To take an M8 threaded rod. Pre-assembled galvanised steel unit, without threaded rod.

WG 900 | RG 3


TECEprofil M10 anchoring clip

To take an M10 threaded rod. Pre-assembled galvanised steel unit, without threaded rod.

WG 900 | RG 3


TECEprofil 4.2 x 13 attaching screw

Self-tapping Phillips screw to fix non-system materials to TECEprofil section tubes and crossbeams.

WG 900 | RG 3


TECEprofil section tube connection

To create a stable axial connection between two TECEprofil section tubes.

WG 900 | RG 3


33


TECEprofil support for stand-alone walls

To brace stand-alone TECEprofil supporting frames.

Consisting of:Galvanised steel supporting foot �Mounting material for fitting to shell floor �Mounting material for fixing to the TECEprofil supporting frame �

WG 900 | RG 3


TECEprofil module feet, extended design

For installation in TECEprofil modules with floor extensions of min. 20 cm and max. 50 cm.Zinc-coated design with TECEprofil module foot.

WG 900 | RG 3


TECEprofil plug-in foot

Levelling foot and end cap for insertion into a TECEprofil section tube.

The levelling foot is suitable for load bearing, e.g. supporting steel bathtubs. No additional steel bathtub foot is required.

Consisting of:Levelling foot to adjust height of TECEprofil section tubes �End cap with rubber overlay �

WG 900 | RG 3


34

TECEprofil – flushing technology accessories

TECEprofil 90° toilet connection elbow, DN 90/90

To connect toilet modules to a DN 90 drain pipe, PE-HD material (weldable)

WG 900 | RG 3


TECEprofil 90° toilet connection elbow, DN 90/100

To connect toilet modules to a DN 100 drain pipe, PE-HD material (weldable)

WG 900 | RG 3


TECEprofil DN 90/100 toilet reducer

To connect toilet modules horizontally to a DN 100 drain pipe, PP material

WG 900 | RG 3


TECEprofil sound-insulation set for toilet and bidet

For sound insulation between the toilet or bidet ceramics and tile layer

WG 900 | RG 3


TECEprofil inlet fittings for urinal

Set consisting of:1/2“ connection sleeve �Urinal connector �

WG 900 | RG 3


35

TECEprofil – panel facing

TECEprofil panel plate

Moistureproof plate for facing the TECEprofil supporting frame and TECEprofil modules. Made of DIN 4102-A2 impregnated plasterboard, non-flammable.

WG 900 | RG 3


TECEprofil knifing filler, impregnated

To fill gaps in the TECEprofil panel facing. Supplied in 5 kg bags.

Filling in accordance with quality level Q1; higher quality levels must be considered in tenders.

WG 900 | RG 3

Order No. DU1 DU2 DU39.200.001 5 kg 20 kg --

TECEprofil panel screw, self-tapping

To attach TECEprofil panels to TECEprofil section tubes. Steel, 3.5 x 35 mm

WG 900 | RG 3


36

TECEprofil – starter set and spare parts case

TECEprofil starter kit

Assortment of basic components, toilet and washstand unit to construct TECEprofil walls.

Consisting of:

Item Order No. Description Quantity1 9.300.000 Toilet module with TECE cistern 12 9.240.200 TECEambia push plate, dual flush, white 13 9.020.033 Connection unit for washstand 14 9.010.002 Corner joint 305 9.030.002 Angle bracket 106 9.030.011 Double attachment 5

WG 900 | RG 3


Spare parts box for TECE cistern

Plastic assortment case with spare parts for the TECE cistern

Consisting of:

Item Order No. Description Quantity1 9.820.223 Drain valve A2 with valve seat and throttle set 12 9.820.229 Pull rod for electrical actuation (A2) 13 9.820.233 Base gasket (A2) 14 9.820.005 O-ring seal for valve seat (A1 and A2) 105 9.820.003 Packer for drain valve A1 56 9.820.004 Guide valve for drain valve A1 57 9.820.006 Fill valve F1, complete 18 9.820.009 Sealing set 59 9.820.010 Lever with seal 3

10 9.820.026 Reinforced hose with O-ring seal 111 9.820.025 O-ring seal 4012 9.820.016 Actuation block, complete 113 9.820.018 Clamping screws 414 9.820.019 Attaching rods 315 9.820.022 Actuation rods 516 9.820.020 Button spring 1017 9.820.024 Rubber buffer 1018 9.820.030 Extension set 1

WG 905 | RG 3


37

TECEprofil – spare parts for toilet modules

9.300.000 - Toilet module, assembly height 1120 mm

Item Order No. Description RG/WG

1 See ET cistern

Cistern, front actuation (page 48 ff.) --

2 9.820.040 Assembly kit for cistern 3/9053 9.820.145 Toilet drain bend holder 3/9054 9.820.042 Bracket for toilet drain bend holder 3/9055 9.820.134 Toilet drain bend DN 90 (PP) 3/9056 9.820.139 Seal for toilet drain bend /adapter 3/9057 9.820.015 Flush pipe seal 3/9058 9.820.011 Flush pipe with O-ring seal 3/9059 9.820.044 Module foot including service brake 3/900

10 9.820.043 By-pack for toilet module 3/90511 9.820.057 Connection set DN 90 for toilet 3/90512 9.820.071 Insert nut 3/90013 9.820.072 Service brake 3/90014 9.820.136 Adapter DN 90 /DN 100 (PP) 3/90515 9.820.254 Flush pipe holder 3/905



1 See ET cistern


2 9.820.040 Assembly kit for cistern 3/9053 9.820.145 Toilet drain bend holder 3/9054 9.820.042 Bracket for toilet drain bend holder 3/9055 9.820.134 Toilet drain bend DN 90 (PP) 3/9056 9.820.139 Seal for toilet drain bend /adapter 3/9057 9.820.015 Flush pipe seal 3/9058 9.820.099 Flush pipe 3/9059 9.820.044 Module foot including service brake 3/900

10 9.820.043 By-pack for toilet module 3/90511 9.820.057 Connection set DN 90 for toilet 3/90512 9.820.071 Insert nut 3/90013 9.820.072 Service brake 3/90014 9.380.000 Pre-wall installation attachment 3/90015 9.820.136 Adapter DN 90 /DN 100 (PP) 3/90516 9.820.254 Flush pipe holder 3/905

38




1 See ET cistern

Cistern, front actuation (page 48 ff.)

--

2 9.820.040 Assembly kit for cistern 3/9053 9.820.145 Toilet drain bend holder 3/9054 9.820.042 Bracket for toilet drain bend holder 3/9055 9.820.134 Toilet drain bend DN 90 (PP) 3/9056 9.820.139 Seal for toilet drain bend /adapter 3/9057 9.820.015 Flush pipe seal 3/9058 9.820.044 Module foot including service brake 3/9009 9.820.043 By-pack for toilet module 3/905

10 9.380.000 Pre-wall installation attachment 3/90011 9.820.057 Connection set DN 90 for toilet 3/90512 9.820.071 Insert nut 3/90013 9.820.072 Service brake 3/90014 9.820.136 Adapter DN 90 /DN 100 (PP) 3/90515 9.820.254 Flush pipe holder 3/905

9.300.007 - Toilet geronto module


1 See ET cistern


--



39


9.300.003 - Toilet module with connection for odour extraction


1 See ET cistern


2 9.820.040 Assembly kit for cistern 3/9053 9.820.145 Toilet drain bend holder 3/9054 9.820.042 Bracket for toilet drain bend holder 3/9055 9.820.134 Toilet drain bend DN 90 (PP) 3/9056 9.820.139 Seal for toilet drain bend/adapter 3/9057 9.820.015 Flush pipe seal 3/9058 9.820.078 Flush pipe with odour extraction DN 70 3/905

9 9.820.044 Module foot including service brake 3/90010 9.820.043 By-pack for toilet module 3/90511 9.820.057 Connection set DN 90 for toilet 3/90512 9.820.071 Insert nut 3/90013 9.820.072 Service brake 3/90014 9.820.136 Adapter DN 90/DN 100 (PP) 3/90515 9.820.254 Flush pipe holder 3/905 - 9.820.126 Flush pipe with odour extraction DN 70 “left” 3/905 - 9.820.127 Flush pipe with odour extraction DN 50 “right” 3/905



1 See ET cistern




40


9.300.044 - Toilet module for TOTO Neorest LE/SE washlet, assembly height 1120 mm


1 See ET cistern




41

TECEprofil – spare parts for toilet connection units

9.041.006 - Toilet connection unit with cistern


1 See ET cistern


--

2 9.820.065 Assembly kit for cistern 3/9053 9.820.034 Drain bend holder DN 50 3/9054 9.820.134 Toilet drain bend DN 90 (PP) 3/9055 9.820.066 By-pack for toilet module 3/9056 9.820.011 Flush pipe with O-ring seal 3/9057 9.820.015 Flush pipe seal 3/9058 9.820.063 Module foot 3/9009 9.820.037 Spacer for the installation of the toilet module

feet3/905

10 9.820.139 Seal for toilet drain bend/adapter 3/90511 9.820.057 Connection set DN 90 for toilet 3/90512 9.820.136 Adapter DN 90/DN 100 (PP) 3/905

9.020.016 - Toilet connection unit (sell-off)


1 9.820.063 Module foot for toilet connection unit 3/9002 9.820.037 Spacer for the installation of the toilet module

feet3/900

42

TECEprofil – spare parts for washstand modules

Washstand modules

9.310.000 - Washstand module, assembly height 1120 mm9.310.022 - Washstand module, assembly height 980 mm

Item Order No. Description RG/WG1 9.820.034 Drain bend holder DN 50 3/9002 9.820.059 KA rubber sleeve NW 30 /50 3/9003 9.820.035 Drain bend DN 50 /DN 40 3/9004 9.820.044 Module foot including service brake 3/9005 9.820.067 By-pack for washstand module 3/9006 9.820.072 Service brake 3/900

9.310.004 - Washstand module with flush-mounted odour trap


1 9.820.070 Flush-mounted siphon (Dallmer) 3/9002 9.820.044 Module foot including service brake 3/9003 9.820.067 By-pack for washstand module 3/9004 9.820.072 Service brake 3/900

9.310.002 - Washstand module for sink


1 9.820.034 Drain bend holder DN 50 3/9002 9.820.059 KA rubber collar NW 30 /50 for washstand

drain bend3/900

3 9.820.035 Drain bend DN 50 /DN 40 3/9004 9.820.044 Module foot including service brake 3/9005 9.820.067 By-pack for washstand module 3/9006 9.820.072 Service brake 3/900

43

TECEprofil – spare parts for urinal modules and connection units

9.510.003 - Washstand support


1 9.820.034 Drain bend holder DN 50 3/9002 9.820.059 KA rubber collar NW 30/50 for washstand

drain bend3/900

3 9.820.035 Drain bend DN 50/DN 40 3/9004 9.820.133 By-pack for washstand support 3/900

Urinal modules/connection units

9.320.008 - Urinal module


1 9.820.074 Urinal flush valve housing with plug 3/9052 9.820.075 Bare wall protection, support, screws 3/9053 9.820.044 Module foot including service brake 3/9004 9.820.076 By-pack for urinal module 3/9055 9.820.055 Inlet fittings for urinal, DN 15 3/9006 9.820.072 Service brake 3/900

9.320.010 - Urinal module for external flush valve


1 9.820.044 Module foot including service brake 3/9002 9.820.079 By-pack for external urinal module 3/9003 9.820.072 Service brake 3/900

44

TECEprofil – spare parts for bidet modules

9.020.038 - Connection unit for urinal


1 9.820.074 Urinal flush valve housing with plug 3/9052 9.820.075 Bare wall protection, support, screws 3/9053 9.820.076 By-pack for urinal module 3/9054 9.820.055 Inlet fittings for urinal, DN 15 3/905

9.020.039 - Connection unit for Keramag Joly and Visit urinal


1 9.820.074 Urinal flush valve housing with plug 3/9052 9.820.102 Holder for urinal flush valve housing 3/9053 9.820.076 By-pack for urinal module 3/9054 9.820.105 Odour extraction trap DN 50 3/905

Bidet modules

9.330.000 - Bidet module, assembly height 1120 mm


1 9.820.034 Drain bend holder DN 50 3/9002 9.820.035 Drain bend DN 50 /DN 40 3/9003 9.820.059 KA rubber sleeve NW 30 /50 3/9004 9.820.044 Module foot including service brake 3/9005 9.820.047 By-pack for bidet module 3/9006 9.820.071 Insert nut 3/9007 9.820.072 Service brake 3/900

45

TECEprofil – spare parts for bath and shower modules

9.330.005 - Bidet module, assembly height 820 mm


1 9.820.034 Drain bend holder DN 50 3/9002 9.820.035 Drain bend DN 50 /DN 40 3/9003 9.820.059 KA rubber sleeve NW 30 /50 3/9004 9.820.044 Module foot including service brake 3/9005 9.820.047 By-pack for bidet module 3/9006 9.820.071 Insert nut 3/9007 9.820.072 Service brake 3/900

Bath/shower module

9.340.000 - Bath/shower module


1 9.820.044 Module foot including service brake 3/9002 9.820.072 Service brake 3/9003 9.820.096 By-pack for bath /shower module 3/900

46

TECEprofil – spare parts

Mounting set for TECE modules

Order No. Description RG/WG

9.820.054 Mounting set 3/900

Seal collar for wall disk


9.820.125 Seal collar for wall diskx 3/900

End cap with rubber overlay for TECEprofil section tube


9.820.128 End cap with rubber overlay for section tube 3/900

Toilet drain bend DN 90 for dry-wall construction, PP


9.820.134 Toilet drain bend DN 90 for dry-wall construction, PP

3/905

Toilet drain bend DN 90 for brick-wall construction, PP


9.820.135 Toilet drain bend DN 90 for brick-wall construction, PP

3/905

47

TECEprofil – spare parts

Seal for flush pipe connection


9.820.213 Seal for flush pipe connection 3/905

Toilet flush pipe connection 20 cm, black, PP


9.820.246 Seal for toilet flush pipe connection 20 cm - /905

Extended toilet connection set 30 cm, DN 90, PE


9.820.214 Extended toilet connection set 30 cm, DN 90, PE-HD

3/905

Toilet mounting set


9.820.245 Toilet mounting set 3/905

48

TECEprofil – spare parts for TECE cisterns

TECE cistern, complete


1 9.820.103 Cistern 1120 3/9052 9.820.101 Cistern 980 3/9053 9.820.100 Cistern 820 3/905

TECE cistern, component parts


1 9.820.027 Bare-wall protection 3/9052 9.820.019 Attaching rods 3/9053 9.820.017 Cistern lid 3/9054 9.820.018 Attaching screws 3/9055 9.820.012 Cistern connection 3/9056 9.820.014 O-ring seal 3/9057 9.820.011 Flush pipe seal 3/9058 9.820.015 Sealing ring 3/9059 9.820.022 Actuation rods 3/904

10 9.820.016 Actuation block 3/90511 9.820.099 Flush pipe, length 185 mm 3/905

TECE cistern, inlet fittings


1 9.820.012 Cistern connection 3/9052 9.820.013 Corner valve 3/9053 9.820.026 Reinforced hose with O-ring seal 3/9054 9.820.025 O-ring seal 3/905

49

TECEprofil – spare parts for TECE cisterns

Fill valve F1


1 9.820.006 Fill valve F1, complete 3/9052 9.820.007 Top-hat membrane 3/9053 9.820.008 Packer 3/9054 9.820.009 Sealing set 3/9055 9.820.010 Lever with seal 3/905

Drain valve A2


1 9.820.223 Drain valve A2 with valve seat and throttle set 3/9052 9.820.233 Foot seal (drain valve) 3/9053 9.820.231 Valve seat with standard throttle

(42 mm diam.)3/905

4 9.820.005 O-ring seal for valve seat (A1 and A2) 3/9055 9.820.230 Throttle set 3/9056 9.820.229 Pull rod for electrical actuation 3/905

Drain valve A1


1 9.820.003 Packer 3/9052 9.820.005 O-ring (valve seat) 3/9053 9.820.004 Guide valve 3/9054 9.820.132 Setting pin (10 pcs.) 3/9055 9.820.029 Flush-pipe throttle 3/905

50

TECEprofil – expert reports and certificates

g

f

e

The full versions of all valid TECEprofil certificates are available on our website www.tece.biz

d

c

b

a

a) Fraunhofer Institute – Report on sound insulation in the TECEprofil system

b) LGA – German registration for TECE flush-mounted cistern

c) KIWA – Dutch registration for TECE flush-mounted cistern

d) SUISSETEC-VSA – Swiss registration recommendation for TECE flush-mounted cistern

e) Sanitized – Evidence of manufacturer quality for the TECEantibac push plate

f) Forschungsinstitut Hohenstein – Investigation Report into the efficacy of the TECEantibac push plate

g) TIN – Polish registration for the TECEprofil pre-wall installation system and flush-mounted cistern

TECEbox – brick-wall construction Assortment List

52

TECEbox – product description

TECEbox for bricked-in pre-wall installation

TECEbox – The TECE cistern for brick-wall construction

For years, the TECE cisterns have been proven thousands of times in practice. They are supplied as the TECEbox for brick-wall installation. The TECE cistern can be used flexibly as a compo-nent of the TECEbox brick-wall modules.

Pre-assembled and sealed

Large 10-litre safety tank

Cistern made of impact-resistant plastic

Water-saving dual flush system, optionally 4.5/6.0/7.5/9.0 litres (large volume) and 3.0 litres (small volume)

Compatible with commercial spare parts (standard fill valve, bell-type seal, etc.)

Suitable for all TECE push plate series (TECEsquare, TECEloop, TECEplanus, TECEambia, TECEbase and toilet flush handles from a range of manufacturers)

Soundproofing tested in accordance with DIN 4109

TECEbox plus –

Brick-wall construction can be this easy:seal in, tile, done.

Small but practical details make fitting the TECEbox plus child’s play.

The height-adjustable bases make it easy to set the correct installation height accurately.The assembly area cover that is available as an accessory creates a complete surface of glass fibre light concrete plates. This means that tiling can be done immediately following installation.

Easy to assemble: Bases and angle brackets are adjustable.

Accessories: The practical assembly area cover for tiling.

Page

TECEbox brick-wall construction cistern 54–55

TECEbox plus 56

TECEbox washstand 57

TECEbox urinal connection units 57

TECEbox spare parts 58–59

53

TECEbox – table of contents

Notes:

Delivery unit 1 (DU1) = Minimum order quantity per item; sometimes it is not possible to order smaller quantities for technical reasons Delivery unit 2 (DU2) = Euro-pallets for modules

TECEbox brick-wall-mounted cistern, front actuation, assembly height 1060 mm

For the installation in a bricked pre-wall construction in front of a solid wall. For flush handle and TECE push plates.

Consisting of:TECE brick-wall construction cistern Safety tank made of impact-resistant plastic Cistern fully pre-assembled and sealed Corner valve and cistern connection pre-assembled Corner connection with 1/2“ female thread 10-litre tank volume; 6-litre preset standard flush volume;

4.5/7.5/9-litre flush volume can be set at any time, 3-litre part-flush with dual flush technology. Residual volume available for immediate cleaning rinse.

Insulated against condensation water Can be set as a single or dual flush cistern depending on the

cistern usedTested in accordance with DIN 19542 – test certificate

7391275-01z Fitting group 1 in accordance with DIN 4109 - test certificate

P-IX3837/I;Low-noise hydraulic fill valve <= 17 dB(A) at a flow pressure

of 3 bar Galvanised steel frame Two M12 retaining bolts and M12 nuts,180 or 230 mm fixing

centresDN 90 toilet drain bend with DN 90/100 reducer, material PP

reducer is also suitable for horizontal installationDN 90 toilet connection set, including protective plug

Please order separately: Toilet push plate (see push plates)

Tip: Ideal for assembly in rows by fixing directly with corner joints and TECEprofil tube as an aid to alignment.

WG 903 | RG 3


TECEbox assembly feet for brick-wall-mounted cistern 9.370.000 Assembly aid for installing TECEbox brick-wall-mounted cisterns.

Consisting of:Two galvanised assembly feet Attachment material for floor attachment

Note: TECEbox assembly feet are not suitable for the installation to a TECEprofil or wooden post-and-beam wall.

WG 903 | RG 3



54

TECEbox – brick-wall construction cistern

TECE brick-wall construction cistern for floor-standing toilet, front actuation

For the installation in a bricked-in pre-wall construction in front of a solid wall. For flush handle and TECE push plates.

Consisting of:Safety tank made of impact-resistant plastic Cistern fully pre-assembled and sealed Corner valve and cistern connection pre-assembled, cistern

connection with 1/2“ female thread10-litre tank volume; pre-set 6-litre standard flush volume;

4.5/7.5/9 -litre flush volume can be set as an option at any time; 3-litre part-flush with dual flush technology

Residual volume available for immediate cleaning rinse Insulated against condensation water Can be set as a single or dual flush cistern depending on the

push plate usedTested in accordance with DIN 19542 – test certificate

7391275-01zFitting group 1 in accordance with DIN 4109 - test certificate

P-IX3837/I;Low-noise hydraulic fill valve <= 17 dB(A) at a flow pressure

of 3 barIncl. wall attachment - mounting plate and fixing material Flush pipe splashproof

WG 905 | RG --


TECEbox brick-wall-mounted cistern, assembly height 820 mm Top or front actuation, for the installation in a bricked-in pre-wall construction in front of a solid wall, height-adjustable. For flush handle and TECE push plates.

Consisting of:TECE brick-wall-mounted cistern, hydraulically optimised for low

assembly heightsDepending on assembly, it can be top or front actuated 6 litre cistern in accordance with DIN 19542, test certificate

7391275-02, 4.5/7.5/9-litre flush volume can be set at any time;

3-litre part-flush with dual flush technology. Residual volume available for immediate cleaning rinse.

Front tile base made of 30 mm structural board DN 90 toilet drain bend with DN 90/100 reducer, material PP

reducer is also suitable for horizontal installationDN 90 toilet connection set, including protective plug

Please order separately: Toilet push plate (see push plates)

Caution: If the push plate is fitted in front and a compact ceramic system is used in the case of cisterns with a low assembly height, the toilet lid may occasionally drop down unintentionally. Use only when compact ceramic systems are used (e.g.: Ideal-Standard: SAN REMO slimline R 3493; V&B: Viala 765310, Viala 765210; Keramag: Renova-Comprimo 204550; Joly 203060) fit push plate with top actuation only.

WG 903 | RG 3



55

TECEbox – brick-wall construction cistern

56

TECEbox plus

TECEbox plus brick-wall-mounted cistern, front actuation, with front facing made of glass-fibre light-weight concrete slab

For the installation in a bricked-in pre-wall construction. Closed surface suitable for tiling. For flush handle and TECE push plates.

Consisting of:TECE brick-wall construction cistern Safety tank made of impact-resistant plastic Cistern fully pre-assembled and sealed Corner valve and cistern connection pre-assembled Corner connection with 1/2“ female thread 10-litre tank volume; 6-litre preset standard flush volume;

4.5/7.5/9-litre flush volume can be set at any time, 3-litre part-flush with dual flush technology. Residual volume available for immediate cleaning rinse.

Insulated against condensation water Can be set as a single or dual flush cistern depending on the

cistern usedTested in accordance with DIN 19542 – test certificate

7391275-01zFitting group 1 in accordance with DIN 4109 – test certificate

P-IX3837/ILow-noise hydraulic fill valve <= 17 dB(A) at a flow pressure

of 3 barGalvanised steel hinge Two M12 retaining bolts and M12 nuts,Z180 or 230 mm fixing

centresIncluding pre-assembled height-adjustable supporting feet DN 90 toilet connection set, including protective plug DN 90 toilet outlet bend with DN 90/100 reducer, material PP

reducer is suitable also for horizontal installation

Please order separately:TECEbox plus build space cover, order no. 9.200.012Toilet push plate (see push plates)

WG 903 | RG 3


TECEbox plus build space cover

Steel sheet with screw-on glass fibre light concrete plate. For full-surface facing of the lower building site of TECEbox plus. Suitable for immediate tiling.

Consisting of:Steel sheet with screw-on glass fibre light concrete plate Fixing material

WG 903 | RG 3



57

TECEbox – washstands and urinals

Bare-wall protection for brick-wall construction cisterns for flush-mounted installation

Larger bare-wall protection to prepare the installation of the instal-lation frame for toilet push plates. Suitable for use with TECE brick- wall cisterns (order no. 9.370.000, 9.371.000, 9.375.000)Caution! Thickness of finish at least 25 mm!

WG 903 | RG 3

Order No. DU19.030.029 1 pc.

TECEbox brick-wall construction frame for washstand

To be mounted in front of a massive wall with four depth-adjustable wall attachments, installation depth 8 – 19 cm, ceramic mounting centres 17 – 28 cm

Consisting of: nCircumferential steel hingenDN 40/50 outlet bend with NW 30/50 rubber collar (also serves as a seal), incl. protective plugn Two M10 threaded rods for ceramic mountingn Fixing material

WG 903 | RG 3

Order No. DU19.370.033 1 pc.

TECEbox urinal flush valve housing for brick wall with retaining clip

To fit the TECE urinal flush system to brick walls

Consisting of:

TECE urinal flush valve housing with inlet flow control and bare wall protection system

Galvanised steel retaining clip

Please order separately: Manual actuation or electronics (see page 83 ff.)

WG 903 | RG 3


58

9.370.000 - Brick-wall-mounted cistern, assembly height 1060 mm


1 See ET cistern

Cistern, front-actuated (page 48 ff.)

-

2 9.820.015 Flush pipe seal 3/9053 9.820.145 Toilet drain bend holder 3/9034 9.820.049 Bracket for toilet drain bend holder 3/9035 9.820.139 Seal for toilet drain bend/adapter 3/9056 9.820.135 Toilet drain bend DN 90 (PP) 3/9037 9.820.051 By-pack for brick-wall-mounted cistern 3/9038 9.820.057 Connection set DN 90 for toilet 3/9059 9.820.011 Flush pipe with O-ring seal 3/905

10 9.820.136 Adapter DN 90/DN 110 3/905

9.375.000 - Brick-wall-mounted cistern, assembly height 820 mm


1 See ET cistern

Cistern, front or top actuated (page 48 ff.)

-

2 9.820.050 Structural board with screws 3/9033 9.820.015 Flush pipe seal 3/9054 9.820.139 Seal for toilet drain bend/adapter 3/9055 9.820.145 Toilet drain bend holder 3/9036 9.820.049 Bracket for toilet drain bend holder 3/9037 9.820.135 Toilet drain bend DN 90 (PP) 3/9038 9.820.043 By-pack for toilet module 3/9059 9.820.057 Connection set DN 90 for toilet 3/905

10 9.820.136 Adapter DN 90/DN 110 3/905

9.371.000 - Brick-wall-mounted cistern with front facing


1 See ET cistern


-

2 9.820.015 Flush pipe seal 3/9053 9.820.145 Toilet drain bend holder 3/9034 9.820.049 Bracket for toilet drain bend holder 3/9035 9.820.139 Seal for toilet drain bend/adapter 3/9056 9.820.135 Toilet drain bend DN 90 (PP) 3/9037 9.820.051 By-pack for brick-wall-mounted cistern 3/9038 9.820.057 Connection set DN 90 for toilet 3/9059 9.820.073 TECEbox plus bases 3/903

10 9.820.011 Flush pipe with O-ring seal 3/90511 9.820.136 Adapter DN 90/DN 110 3/905

TECEbox – spare parts

59

TECEbox – spare parts

9.041.008 - Brick-wall construction cistern for floor-standing toilet, front actuation


1 See ET cistern


-

2 9.820.011 Flush pipe with O-ring seal 3/9053 9.820.015 Flush pipe seal 3/905

60

TECEbox 8 cm Assortment List

62

TECEbox 8 cm – product description

The 8 cm flush-mounted cistern from TECE fits in every wall.

The TECE cistern is extremely flat and thus ideal for installation in 8 cm masonry. The construction is based on German know-how and is the product of many years of experience of TECE in the field of flushing technology.

n Completely pre-mounted cistern – simply connect it up and that’s it!

n Water saving dual flush system (4.5/3 litres, 6/3 and 9/3 litres)

n 9.5 litre safety tank, enough water when it matters

n Smallest push plates on the market

n Easy servicing on account of bendable drain valve

n Low-noise hydraulic fill valve

n Single or dual flush system – using the same internal mechanism

n The standard setting is 6/3 litres

Saving water when possible, flushing well when neccessary.

n The TECE cistern can be set to a high flush volume (9 litres) if required. This means that reliable flushing of the drainpipes is ensured even under less than ideal conditions.

n Dual flush option to save water (4.5/3, 6/3 or 9/3 litres).

n Single flush option: Complete certainty with every flush – choice of either 4.5/6 or 9 litres.

n Residual water volume for additional flushing power, can be used for immediate after-flush when required.

Clearly arranged equipment:The TECE 8 cm cistern on the inside.

Adjustment of the flushing volume at the drain valve.

63

TECEbox 8 cm – table of contents

Page

Concealed cistern for brick walls 64–65

Toilet module and bidet module 66

Washstand module 67

Accessories 67

Spare parts 68–70

Clearly arranged equipment:The TECE 8 cm cistern on the inside.

64

Brick-wall construction cistern TECEbox basic for floor-standing toilet to be embedded in the wall, depth 8 cm, front actuation

For installation in a brick wall or in front of a solid wallFor flush handles and TECE push plates

Consisting of: TECE brick-wall construction cistern 8 cm nCistern completely pre-assembled and sealed nSafety tank made of high-impact resistant plastic, n

cistern connection with 1/2“ internal threadFlush pipe height-adjustable and shortenable, armouring net n9.5 litre cistern volume: 6 litre pre-set standard flushing volume, n

4.5/6 and 9 litre flush volume to be adjusted at any time, 3 litre partial flush volume in dual flush system, residual volume to be used for immediate cleaning flush

Cistern and flush pipe insulated against condensation water nDepending on the push plate to be used as single or n

dual flush system, low-noise hydraulic fill valve <= 17 dB(A) at 3 bar flow pressure

Please order separately: push plate (see push plates)TECEbox flush pipe connection

WG 912 | RG --

Order No. DU1 DU29.370.007 1 pc. 10 pcs.

Brick-wall construction cistern TECEbox for wall-hung toilet, depth 8 cm, front actuation

For installation in a brick-built wall or in front of a solid wallFor flush handles and TECE push plates

Consisting of: TECE brick-wall construction cistern 8 cm nSafety tank made of high-impact resistant plastic, cistern n

connection with 1/2“ internal thread, armouring net 9.5 litre cistern volume: 6 litre pre-set standard flushing volume, n


Insulated against condensate water nDepending on the push plate to be used as a single or n

dual flush systemLow-noise hydraulic fill valve <= 17 dB(A) at 3 bar flow pressure nDrain bend DN 90/90 nToilet connection fitting DN 90; including building protection n

stopper Mounting space 180 or 230 mm n

Please order separately: push plate (see push plates)TECEbox supporting feetTECEprofil sound absorption set

WG 912 | RG --


ThE CiSTERn foR ThE ToiLET fLuSh hAndLE

TECEbox 8 cm – brick-wall construction cistern

65

Brick-wall construction cistern TECEbox plus, sound-proofed, depth 80 mm, front actuation

For installation in a brick-built wall or in front of a solid wallFor flush handles and TECE push plates

Consisting of: TECE brick-wall construction cistern 8 cm nLower construction space sound-proofed and lined nSafety tank made of high-impact resistant plastic, cistern n

connection with 1/2“ internal thread, armouring net 9.5 litre cistern volume: 6 litre pre-set standard flushing volume, n


Cistern insulated against condensate water nDepending on the push plate to be used as single or n


Drain bend DN 90/90 nToilet connection fitting DN 90; including building protection n

stopper Sound-proofing set nMounting space 180 or 230 mm n

Please order separately: push plate (see push plates)TECEbox supporting feet

WG 912 | RG --


TECEbox supporting feet for 8 cm brick-wall construction cistern with steel groove

Suitable for 9.370.008 and 9.370.009

steel version, height-adjustable,including fastening material

WG 912 | RG --

Order No. DU1 DU29.030.026 1 pc. --


TECEbox 8 cm – brick-wall construction cistern

66

TECEprofil toilet module and TECEbox 8 cm bidet module

TECEprofil toilet module, with 8 cm cistern

To be mounted in a metal or wooden supporting wall or in front of a solid wallFor flush handles and TECE push plates

Complete pre-mounted unit, consisting of:TECE flush-mounted cistern for front actuation nSafety tank made of high-impact resistant plastic nCistern complete pre-mounted and sealed, corner valve and n

cistern connection pre-mounted Cistern connection with 1/2“ internal thread n9.5 litre cistern volume: 6 litre pre-set standard flush volume, n

4.5/6 and 9 litre flushing volume to be adjusted as an option at any time; 3 litre partial volume flush in dual flush system

Residual volume to be use for immediate cleaning flush nCistern insulated against condensate water nDepending on the push plate to be used as single or n


Module consisting of:Self-supporting mounting frame with powder-coated surface nMounting space 180 or 230 mm nDrain bend DN 90/90 nToilet connection set DN 90 nFastening for pre-wall installation n

Please order separately:push plate (see push plates)TECEprofil sound absorption set

WG 912 | RG --


Brick-wall protection for bare-wall cisterns for flush-mounted installation

Larger bare-wall protection to prepare the installation of the installation frame for toilet push plates. Suitable for use with TECE brick-wall construction cisterns (order no. 9.370.000, 9.371.000, 9.375.000)

Caution! Thickness of finish at least 25 mm!

WG 903 | RG 3

Order No. DU19.030.029 1 pc.

Brick-wall construction bidet module TECEbox, depth 8 cm

To be mounted in the wall or in front of a massive wall.

Consisting of:Surrounding steel groove nDrain bend 50 mm including flush pipe seal nTwo wall disks 1/2“ x 1/2“ internal thread nFastening material nCover rosettes n

WG 912 | RG --



67

TECEbox 8 cm – washstand module and accessories

Brick-wall construction washstand module TECEbox, 8 cm depth

To be embedded in the wall or set up in front of a solid wall,

consisting of: Surrounding steel groove nWashstand mounting spacing adjustable nTwo wall disks 1/2“ x 1/2“ internal thread nDrain bend n ø 50 mm including flush pipe seal,

fastening material

WG 912 | RG --


System wall disk TECEprofil

16 x 1/2“ TECEflex

WG 900 | RG --

Order No. DU1 DU29.021.015 1 pc. --

System wall disk TECEprofil

1/2“ x 1/2“

WG 900 | RG --

Order No. DU1 DU29.021.017 1 pc. --

TECEbox flush pipe connection pipe

For floor-standing toilets, white, including flush pipe seal and cover rosette

WG 912 | RG --

Order No. DU1 DU29.221.011 1 pc. --

TECEprofil sound-insulation set for toilet and bidet

For sound absorption between toiletor bidet ceramics and file cover.

WG 900 | RG --

Order No. DU1 DU29.200.010 1 pc. --

68

TECEbox – spare parts for 8 cm modules

9.370.007

Brick-wall construction cistern, depth 8 cm

For floor-standing toilets

Pos. Order No.1 9.820.015 Flush pipe seal2 9.820.251 Flush pipe PE-HD with flush pipe seal3 9.820.143 Polystyrene protection for flush pipe4 9.820.144 By-pack for cistern 8 cm

9.370.008


For wall-hung toilet

Pos. Order No.1 9.820.015 Flush pipe seal2 9.820.256 Toilet drain bend holder3 9.820.049 Bracket toilet drain bend holder4 9.820.038 Seal for drain bend5 9.820.150 Toilet drain bend PE-HD DN 90/906 9.820.192 Flush pipe PP with flush pipe seal7 9.820.146 By-pack for brick-wall construction cistern 8 cm8 9.820.057 Connection fitting DN 90 for toilet9 9.820.255 Flush pipe holder

9.370.009

Brick-wall construction cistern, sound-proofed, depth 8 cm

For wall-hung toilet

Pos. Order No.1 9.820.015 Flush pipe seal2 9.820.256 Toilet drain bend holder3 9.820.049 Bracket toilet drain bend holder4 9.820.038 Seal for drain bend5 9.820.150 Toilet drain bend PE-HD DN 90/906 9.820.192 Flush pipe PP with flush pipe seal7 9.820.146 By-pack for brick-wall construction cistern 8 cm8 9.820.057 Connection fitting DN 90 for toilet9 9.820.255 Flush pipe holder

9.300.040

Toilet module TECEprofil with 8 cm cistern

Pos. Order No.1 9.820.015 Flush pipe seal2 9.820.145 Toilet drain bend holder3 9.820.049 Bracket toilet drain bend holder4 9.820.038 Seal for drain bend5 9.820.150 Toilet drain bend PE-HD DN 90/906 9.820.192 Flush pipe PP with flush pipe seal7 9.820.147 By-pack for toilet module with 8 cm cistern8 9.820.057 Connection fitting DN 90 for toilet9 9.820.254 Flush pipe holder

69

TECEbox – spare parts for 8 cm bidet and washstand modules

9.370.031

TECEbox brick-wall construction bidet module depth 8 cm

Pos. Order No.1 9.820.148 By-pack for brick-wall construction bidet module2 9.820.149 Clamp for drain bend3 9.820.151 Drain bend 50 mm4 9.820.152 Rubber sleeve

9.370.032

Brick-wall construction washstand module TECEbox, depth 8 cm

Pos. Order No.1 9.820.153 By-pack for brick-wall construction washstand module2 9.820.149 Clamp for drain bend3 9.820.151 Drain bend 50 mm4 9.820.152 Rubber sleeve

9.820.228

Spare parts box for TECE 8 cm cistern

Pos. Order No. Quantity1 9.820.224 Drain valve A3 22 9.820.222 Towing ring abundance (A3) 23 9.820.163 Hold-down device (A3) 54 9.820.161 Base gasket (A3) 2 x 55 9.820.220 O-ring seal for valve seat (A3) 2 x 56 9.820.216 Connection for fill valve holder 57 9.820.215 Fill valve holder 58 9.820.217 Reinforced hose with O-ring seal 19 9.820.221 O-ring seal 4 x 10

10 9.820.006 Fill valve F1, complete 111 9.820.010 Lever with seal 312 9.820.009 Sealing set 513 9.820.190 Splash protection with clamping screws 214 9.820.191 Clamping screws 1 x 1015 9.820.189 Attaching rods, short 1 x 316 9.820.219 Attaching rods w/o screws 1 x 417 9.820.193 Actuation rods 2 x 1018 9.820.218 Button spring 10

70

TECEbox – spare parts for 8 cm cisterns


Pos. Order No.1 9.820.250 Cistern 8 cm, without flush pipe2 9.820.188 Bare wall protection3 9.820.189 Attaching rods4 9.820.190 Splash protection with clamping screws5 9.820.191 Clamping screw set6 9.820.012 Cistern connection7 9.820.014 O-ring seal for flush pipe8 9.820.192 Flush pipe PP with flush pipe seal9 9.820.251 Flush pipe PE-HD with flush pipe seal

10 9.820.015 Flush pipe seal11 9.820.194 Operating hook

TECE box 8 cm cistern, inlet fittings

Pos. Order No.1 9.820.012 Cistern connection 2 9.820.013 Corner valve 3 9.820.217 Reinforced hose with O-ring seal4 9.820.221 O-ring seal

Repair set for cistern made of PP

To eliminate damages (i.e. by start of drilling) up to a diameter of approx. 12 mm

Pos. Order No.1 9.221.013 Repair set for cistern made of PP

fill valve

Pos. Order No.1 9.820.006 Fill valve F1, complete2 9.820.007 Top-hat membrane3 9.820.008 Packer4 9.820.009 Sealing set5 9.820.010 Lever with seal

drain valve 8 cm cistern

Pos. Order No.1 9.820.224 Drain valve A32 9.820.161 Base gasket (A3)3 9.820.163 Hold-down device (A3)4 9.820.165 Valve seat with seal (A3)

TECE push plates Assortment List

72

TECE push plates – product description

The installation kit also includes two bow-type handles for the installation or de-installation of the glass surface.

Installation frames for installation of the TECEloop glass/TECEsquare glass and TECEsquare metal push plates.

Flush-mounted installation of TECEloop glass and TECEsquare glass

The optional flush-mounted installation of the glass push plates is an outstanding characteristic feature of TECEloop and TECEsquare series. Using the installation set, the instal-lation is as easy as it is precise.

The TECEloop modular system: TECEloop modular system – 104 possible combinationsThe TECEloop modular system consists of a standard range of 8 buttons and 13 covers. This produces a total of 104 different possible combinations.

Cover ...Buttons ... complete toilet push plate!

=+

The highlight: some of the glass covers coordinate with the products from Alape, Emco and Burgbad. Bathroom planners thus always have the right toilet push plate to match the accessories and furnishings of those manufacturers.

Installation of TECEsquare metal

For mounting TECEsquare metal, the installation frame is required.

TECE cisterns TECEsquare metal

For mounting TECEsquare metal, installation frame is required.

Toiletinstallation frame

ß

Installation of TECEsquare glass

TECE cisterns TECEsquare Glass

For flush-mountedTECEsquare glass, the installation frame is required.

Toiletinstallation frame

TECEsquare glass

For non flush-mounted TECEsquare glass, the frame is not required.

ß

ß

Page

TECEbase push plate 74–75

TECEambia push plates 76–77

TECEloop push plates 78–83

TECEsquare push plates 84–87

TECEplanus push plates 88–89

TECEplanus electronic flushing systems 90–94

TECEplanus electronic flushing systems and accessories 95

Spare parts 96–102

73

TECE push plates – table of contents

74

The TECEbase push plates with dual flush system form the "basis" for the TECE push plates. Thanks to their technical, clear design they are widely applicable.

Simple operation is facilitated by buttons using switching technology. Like all TECE push plates, the TECEbase push plates can also be combined with all the TECE cisterns.

TECEbase toilet push plate for dual flush system

Push plate for TECE cisterns, for front or top actuation. Plastic push plate, including actuating rods and mounting material.

214 x 145 x 18 mm

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEbase White 9.240.700 1 pc. 10 pcs. --TECEbase Bright chrome 9.240.701 1 pc. 10 pcs. --TECEbase Matte chrome 9.240.702 1 pc. 10 pcs. --

75

TECEbase push plates

76

TECEambia push plates, with their single or dual flush system, are the universal plastic stand-ard. Their compact dimensions fit harmoniously into every bathroom decor with their numerous

variations. Double-sided rubber buffers reliably prevent rattling noises. The antibacterial equipped version of TECEambia inhibits surface bacterial growth with silver

ions - ideal for public sanitary areas.

77

TECEambia push plates

TECEambia toilet push plate for dual flush system

Push plate for TECE cisterns, for front or top actuation. Plastic push plate with push buttons buffered with rubber on both sides, incl. actuating rods and mounting material.

214 x 152 x 22 mm

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEambia White 9.240.200 1 pc. 10 pcs. --TECEambia White, antibacterial 9.240.240 1 pc. 10 pcs. --TECEambia Pergamon grey 9.240.201 1 pc. 10 pcs. --TECEambia Matte chrome 9.240.225 1 pc. 10 pcs. --TECEambia Bright chrome 9.240.226 1 pc. 10 pcs. --TECEambia Frame matte chrome, buttons bright chrome 9.240.253 1 pc. 10 pcs. --TECEambia Frame bright chrome, buttons matte chrome 9.240.254 1 pc. 10 pcs. --

TECEambia toilet push plate for single flush system

Push plate for TECE cistern, for front or top actuation. Plastic push plate with push button buffered with rubber on both sides, including actuating rod and mounting material.

214 x 152 x 22 mm

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEambia White 9.240.100 1 pc. 10 pcs. --TECEambia White, antibacterial 9.240.140 1 pc. 10 pcs. --TECEambia Pergamon grey 9.240.101 1 pc. 10 pcs. --TECEambia Matte chrome 9.240.125 1 pc. 10 pcs. --TECEambia Bright chrome 9.240.126 1 pc. 10 pcs. --

TECEambia urinal push plate including cartridge

Fine assembly set for TECE flush valve housing Flush valve in accordance with DIN EN 12541, category 1.5 and 4Adjustable flush volume 1, 2 and 4 litres Usable from 0.5 bar minimum flow pressure

Consisting of:Flush valve cartridge with automatic jet cleaning needle �Plastic screw-down push plate �Actuating rod and mounting material �

100 x 120 x 15 mm

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEambia White 9.242.100 1 pc. 15 pcs. --TECEambia White, antibacterial 9.242.140 1 pc. 15 pcs. --TECEambia Pergamon grey 9.242.101 1 pc. 15 pcs. --TECEambia Bright chrome 9.242.126 1 pc. 15 pcs. --

78

TECEloop push plate with dual flush system, with their formal appearance, are reduced to a minimum. Numerous design options arise from the various material

and colour combinations of frames and buttons now further expanded with the TECEloop modular system. The unique option of flush-mounted installation is available with all

glass versions.

79

TECEloop push plates

TECEloop toilet push plate for dual flush system, plastic

Push plate for TECE cistern, for front or top actuation. Very flat plastic push plate with two spring-mounted push buttons.

216 x 145 x 6 mm

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEloop White 9.240.600 1 pc. 10 pcs. --TECEloop White, antibacterial 9.240.640 1 pc. 10 pcs. --TECEloop White, buttons bright chrome 9.240.627 1 pc. 10 pcs. --TECEloop Pergamon grey 9.240.601 1 pc. 10 pcs. --TECEloop Matte chrome 9.240.625 1 pc. 10 pcs. --TECEloop Bright chrome 9.240.626 1 pc. 10 pcs. --

TECEloop glass toilet push plate for dual flush system

Push plate for TECE cistern, for front or top actuation. Flat glass push plate with two spring-mounted push buttons. Suitable for flush-mounted installation in combination with TECEloop installation frame.

220 x 150 x 11 mm

Installation frame not contained in the scope of delivery.

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEloop Glass white, buttons white 9.240.650 1 pc. 10 pcs. --TECEloop Glass white, buttons matte chrome 9.240.659 1 pc. 10 pcs. --TECEloop Glass white, buttons bright chrome 9.240.660 1 pc. 10 pcs. --TECEloop Glass green, buttons white 9.240.651 1 pc. 10 pcs. --TECEloop Glass green, buttons matte chrome 9.240.652 1 pc. 10 pcs. --TECEloop Glass green, buttons bright chrome 9.240.653 1 pc. 10 pcs. --TECEloop Glass black, buttons white 9.240.654 1 pc. 10 pcs. --TECEloop Glass black, buttons matte chrome 9.240.655 1 pc. 10 pcs. --TECEloop Glass black, buttons bright chrome 9.240.656 1 pc. 10 pcs. --TECEloop Glass black, buttons black 9.240.657 1 pc. 10 pcs. --TECEloop Glass black, buttons gold-plated 9.240.658 1 pc. 10 pcs. --

80

TECEloop push plates – modular system

TECEloop modular system

The TECEloop modular system can be used to individually combine covers and buttons. The choice of twelve (glass) cover colours and a slate slab as well as eight different button colours produces a multitude of combinations. By matching the cover colours to the colours of manufacturers, such as Alape or EMCO, the bathroom can be designed harmoniously.

In combination with the installation frame for toilet push platessuitable for flush mounting.

Modular system consisting of:Actuation unit with button for TECEloop toilet push plate �Cover for TECEloop toilet push plate �

Actuation unit for TECEloop toilet push plate

Actuation unit with buttons for TECEloop push plate for front or top actuation, for combination with the cover of the TECEloop modular system.

Cover not contained in the scope of delivery.

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEloop Buttons white 9.240.663 1 pc. 10 pcs. --TECEloop Buttons white antibac 9.240.664 1 pc. 10 pcs. --TECEloop Buttons matte chrome 9.240.665 1 pc. 10 pcs. --TECEloop Buttons bright chrome 9.240.666 1 pc. 10 pcs. --TECEloop Buttons black 9.240.667 1 pc. 10 pcs. --TECEloop Buttons gold 9.240.668 1 pc. 10 pcs. --TECEloop Buttons brushed stainless steel (with anti-fingerprint) 9.240.669 1 pc. 10 pcs. --TECEloop Buttons pergamon grey 9.240.684 1 pc. 10 pcs. --

Cover for TECEloop toilet push plate

Cover for TECEloop push plate for front or top actuation, for com-bination with the actuation unit of the TECEloop modular system.

Actuation unit not contained in the scope of delivery.

WG 904 | RG 3

Description Colour Suitable for Order No. DU1 DU2 DU3TECEloop Glass, mint green 9.240.670 1 pc. 10 pcs. --TECEloop Glass, white Emco 9.240.671 1 pc. 10 pcs. --TECEloop Glass, asis green Emco 9.240.672 1 pc. 10 pcs. --TECEloop Glass orange 9.240.673 1 pc. 10 pcs. --TECEloop Glass black Alape and Emco 9.240.674 1 pc. 10 pcs. --TECEloop Slate slab 9.240.675 1 pc. 10 pcs. --TECEloop Glass silver-grey Alape 9.240.676 1 pc. 10 pcs. --TECEloop Glass blue-grey 9.240.677 1 pc. 10 pcs. --TECEloop Glass coffee brown 9.240.678 1 pc. 10 pcs. --TECEloop Glass ruby red Alape 9.240.679 1 pc. 10 pcs. --TECEloop Glass ivory Alape 9.240.680 1 pc. 10 pcs. --TECEloop Mirror 9.240.683 1 pc. 10 pcs. --TECEloop Glass grass green Burgbad 9.240.685 1 pc. 10 pcs. --

81


Installation frame for flush-mounted installation

Installation kit for flush-mounted installation of the TECEloop glass and TECEsquare glass toilet push plates as well as for the installa-tion of TECEsquare metal (assembly height 2 mm). Depth-adjustable tile frame from 5 to 18 mm for wall tiles, (with adjustment bolt 9.820.181 from 18 to 33 mm). Including disassembly tool for push plate.

Installation frame required during shell assembly!

Caution: Suitable for TECEprofil dry-wall toilet modules; also for brick walls in combination with the bare-wall protection (9.030.029).

WG 904 | RG 3

Order No. DU1 DU2 DU39.240.646 Tile frame white 1 pc. 10 pcs. --9.240.647 Tile frame black 1 pc. 10 pcs. --9.240.649 Tile frame bright chrome 1 pc. 10 pcs. --9.240.648 Tile frame gold-plated 1 pc. 10 pcs. --

Bare-wall protection for brick-wall cisterns for flush-mounted installation

Larger bare-wall protection to prepare the installation of the installa-tion frame for toilet push plates. Suitable for use with TECE brick-wall cisterns (order no. 9.370.000, 9.371.000, 9.375.000).

Caution:Thickness of finish at least 25 mm!

WG 903 | RG 3

Order No. DU19.030.029 1 pc.

82

TECEloop urinal push plate including cartridge

Fine assembly set for TECE flush valve housingFlush valve in accordance with DIN EN 12541, category 1.5 and 4Adjustable flush volume 1, 2 and 4 litres Usable from 0.5 bar minimum flow pressure

Consisting of: Flush valve cartridge with automatic jet cleaning needle �Very flat push plate made of plastic �Actuating rod and mounting material �

100 x 120 x 6 mm

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEloop White 9.242.600 1 pc. 15 pcs. --TECEloop White, antibacterial 9.242.640 1 pc. 15 pcs. --TECEloop White, button bright chrome 9.242.627 1 pc. 15 pcs. --TECEloop Pergamon grey 9.242.601 1 pc. 15 pcs. --TECEloop Matte chrome 9.242.625 1 pc. 15 pcs. --TECEloop Bright chrome 9.242.626 1 pc. 15 pcs. --

TECEloop glass urinal push plate incl. cartridge

Fine assembly set for TECE flush valve housingFlush valve in accordance with DIN EN 12541, category 1.5 and 4Adjustable flush volume 1, 2 and 4 litres Usable from 0.5 bar minimum flow pressure.

Consisting of:Flush valve cartridge with automatic jet cleaning needle �Flat glass actuation �Actuating rod and mounting material �

Suitable for flush-mounted installation in combination with TECEloop urinal installation frame

104 x 124 x 11 mm

Urinal installation frame not contained in the scope of delivery.

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEloop Glass white, button white 9.242.650 1 pc. 15 pcs. --TECEloop Glass white, button matte chrome 9.242.659 1 pc. 15 pcs. --TECEloop Glass white, button bright chrome 9.242.660 1 pc. 15 pcs. --TECEloop Glass green, button white 9.242.651 1 pc. 15 pcs. --TECEloop Glass green, button matte chrome 9.242.652 1 pc. 15 pcs. --TECEloop Glass green, button bright chrome 9.242.653 1 pc. 15 pcs. --TECEloop Glass black, button white 9.242.654 1 pc. 15 pcs. --TECEloop Glass black, button matte chrome 9.242.655 1 pc. 15 pcs. --TECEloop Glass black, button bright chrome 9.242.656 1 pc. 15 pcs. --TECEloop Glass black, button black 9.242.657 1 pc. 15 pcs. --TECEloop Glass black, button gold-plated 9.242.658 1 pc. 15 pcs. --


83

TECEloop urinal installation frame for flush-mounted installation

Installation kit for flush-mounted installation of the TECEloop glass toilet push plate in a brick wall. Depth-adjustable tile frame from 5 to 18 mm for wall tiles (with adjustment bolt 9.820.181 from 18 to 33 mm).

Including disassembly tool for push plate.Required during shell assembly.Caution: Only for dry-wall installation!

WG 904 | RG 3

Order No. DU1 DU2 DU39.242.646 Tile frame, white 1 pc. 10 pcs. --9.242.647 Tile frame, black 1 pc. 10 pcs. --9.242.649 Tile frame bright chrome 1 pc. 10 pcs. --9.242.648 Tile frame gold-plated 1 pc. 10 pcs. --


84

TECEsquare metal push plates with a dual flush system – natural effect made of pure stainless steel.

An extremely flat construction and three narrow joints stand out with a minimalist design. Equipped with a special switch technology and an abrasion-resistant

protective layer against fingerprints on the stainless steel version, the push plates ensure a perfect appearance in a modern bathroom architecture.

85

TECEsquare metal toilet push plate for dual flush system

Push plate for TECE cistern, for front or top actuation. Flat metal push plate with two spring-mounted actuation rocker buttons, assembly height 2 mm.

240 x 170 x 2 mm

Important notes: Installation only in combination with the installation frame for flush-mounted installation (order no. 9.240.647). Please order separately!

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEsquare Brushed stainless steel (with anti-fingerprint) 9.240. 810 1 pc. 10 pcs. --TECEsquare Bright chrome 9.240. 811 1 pc. 10 pcs. --TECEsquare White 9.240.812 1 pc. 10 pcs. --

Installation frame for flush-mounted installation

Installation kit for flush-mounted installation of the TECEloop glass and TECEsquare glass toilet push plates as well as for the installa-tion of TECEsquare metal (assembly height 2 mm). Depth-adjustable tile frame from 5 to 18 mm for wall tiles, (with adjustment bolt 9.820.181 from 18 to 33 mm). Including disassembly tool for push plate.

Installation frame required during shell assembly!

Caution: Suitable for TECEprofil dry-wall toilet modules; also for brick walls in combination with the bare-wall protection (9.030.029).

WG 904 | RG 3

Order No. DU1 DU2 DU39.240.646 Tile frame, white 1 pc. 10 pcs. --9.240.647 Tile frame, black 1 pc. 10 pcs. --9.240.649 Tile frame bright chrome 1 pc. 10 pcs. --9.240.648 Tile frame gold-plated 1 pc. 10 pcs. --

TECEsquare push plates

86

TECEsquare glass toilet push plate for dual flush system

Push plate for TECE cistern, for front or top actuation. Flat glass push plate with two spring-mounted buttons. Suitable for flush-mounted installation in combination with installation frame for flush mounting.

220 x 150 x 11 mm

Installation frame for flush-mounted installation not contained in the scope of delivery. Please order separately!

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEsquare Glass white, buttons white 9.240.800 1 pc. 10 pcs. --TECEsquare Glass white, brushed stainless steel buttons 9.240.801 1 pc. 10 pcs. --TECEsquare Glass white, buttons bright chrome 9.240.802 1 pc. 10 pcs. --TECEsquare Glass green, buttons white 9.240.803 1 pc. 10 pcs. --TECEsquare Glass green, brushed stainless steel buttons 9.240.804 1 pc. 10 pcs. --TECEsquare Glass green, buttons bright chrome 9.240.805 1 pc. 10 pcs. --TECEsquare Glass black, brushed stainless steel buttons 9.240.806 1 pc. 10 pcs. --TECEsquare Glass black, buttons bright chrome 9.240.807 1 pc. 10 pcs. --TECEsquare Glass black, buttons gold 9.240.808 1 pc. 10 pcs. --TECEsquare Glass black, buttons black 9.240.809 1 pc. 10 pcs. --

Brick-wall protection for bare-wall cisterns for flush-mounted installation

Larger bare-wall protection to prepare the installation of the instal-lation frame for toilet push plates. Suitable for use with TECE brick-wall cisterns (order no. 9.370.000, 9.371.000, 9.375.000).

Thickness of finish at least 25 mm!

WG 903 | RG 3

Order No. DU19.030.029 1 pc.


87


TECEsquare glass push plates with dual flush system and the option of flush-mounted installation.

88

TECEplanus push plates made of stainless steel are robust, vandal-proof and, with a single or dual flush system, they are ideal for high operational demands.

A concealed screw safeguards them against theft. So they are particularly suitable for public sanitary areas, restaurants or hotels. Their especially compact dimensions and

elegant design harmonise with any ambience.

89

TECEplanus push plates

TECEplanus toilet push plate for dual flush system

Stainless steel push plate for TECE cisterns, for front or top actuation, attached with concealed screws. Stop buffered with rubber on both sides, including actuating rods and mounting material.

214 x 144 x 15 mm

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEplanus White, silk-mat 9.240.322 1 pc. 10 pcs. --TECEplanus White shiny 9.240.324 1 pc. 10 pcs. --TECEplanus Brushed stainless steel 9.240.320 1 pc. 10 pcs. --TECEplanus Bright chrome 9.240.321 1 pc. 10 pcs. --

TECEplanus toilet push plate for single flush technology

Stainless steel push plate for TECE cisterns, for front or top actuation, attached with concealed screws. Stop buffered with rubber on both sides, including actuating rods and mounting material.

214 x 144 x 15 mm

WG 904 | RG 3


TECEplanus urinal push plate including cartridge

Fine assembly set for TECE flush valve housing Flush valve in accordance with DIN EN 12541, category 1.5 and 4Adjustable flush volume 1, 2 and 4 litres Usable from 0.5 bar minimum flow pressure

Consisting of:Flush valve cartridge with automatic jet cleaning needle �Stainless steel push plate �Actuating rod and mounting material �

100 x 120 x 12 mm

WG 904 | RG 3


90

Toilet and urinal electronics from TECE– made of brushed stainless steel or chrome based on TECEplanus push plates

for diverse applications, these vandal-proof push plates are equipped with an infrared sensor. This allows hygienic and contactless triggering of toilet or urinal flushing.

91

TECEplanus toilet electronics with IR sensor, 6 V battery

For non-contact flush triggering of TECE cisterns. Suitable for all TECE cisterns with front actuation and actuation height of about 1 m.

Consisting of:Autofocus infrared sensor with two recognition areas for the �

recognition of standing or sitting persons Push plate made of stainless steel for optional manual flush �

triggeringWater-proof battery compartment including lithium battery, �

type 2CR5, 6 V DC Electric lifting device with servo-motor completely mounted on �

the actuation block Adjustable flush volume 6 or 9 litres �Actuating rod and mounting material �

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEplanus Brushed stainless steel 9.240.350 1 pc. -- --TECEplanus Bright chrome 9.240.351 1 pc. -- --TECEplanus White shiny 9.240.361 1 pc. -- --

TECEplanus toilet electronics with IR sensor, 230 /12 V mains

Like 9.240.350/9.240.351

but with mains operation by external 230/12 V transformer (not contained in the scope of delivery)

Please order separately:TECEplanus 230/12 V transformer – order no.: 9.810.003 �

(see page 97)TECEplanus 12 V connection cable – order no.: 9.810.004 �

(see page 97)

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEplanus Brushed stainless steel 9.240.352 1 pc. -- --TECEplanus Bright chrome 9.240.353 1 pc. -- --TECEplanus White shiny 9.240.362 1 pc. -- --

TECEplanus electronic flushing systems

92

TECEplanus toilet remote triggering for safety support arm, 6 V battery

For barrier-free construction, for remote triggering of TECE cisterns by remote switch in the safety support arm. Suitable for all TECE cisterns with front actuation.

Additional manual flush triggering by optional single-volume push plate is possible.

Suitable for safety support arms with remote triggering:HEWI series LifeSystem safety support arms 802.50.. �

with upgrade kit HEWI 802.50.060R (right) or HEWI 802.50.060L (left)

HEWI series 801 safety support arms 802.50.., � with upgrade kit HEWI 802.50.060

HEWI series 805 safety support arms 805.50.., � with upgrade kit HEWI 802.50.060

KEUCO Plan Care 34903 and 34905 with remote triggering �Consisting of:

Retrofittable battery-operated remote receiver �Electric lifting device with servo-motor completely mounted on �

the actuation blockAdjustable flush volume 6 or 9 litres �Water-tight battery compartment for installation in the cistern �Four batteries, type Mono/D/LR20 �

Please order separately: Single-volume push plate, e.g. TECEplanus stainless steel, �

Order No.: 9.240.310 (see page 91)

WG 904 | RG 3


TECEplanus toilet remote triggering for safety support arm, 230/12 V mains

Like 9.240.354, but for power supply by external 230/12 V transformer (transformer not contained in the scope of delivery).

Please order separately:TECEplanus 230/12 V transformer – Order No.: 9.810.003 �

(see page 97)TECEplanus 230/12 V connection cable – Order No.: 9.810.004 �

(see page 97)



WG 904 | RG 3



93

TECEplanus toilet remote release for cable-connected electric button, 6 V battery

For barrier-free construction, for remote triggering of TECE cisterns by cable-connected electric button in the safety support arm or in the wall. Suitable for all TECE cisterns with front actuation.

Additional manual flush triggering by optional single-volume push plate is possible (not contained in the scope of delivery).

Consisting of:Retrofittable, battery-operated lifting device with servo-motor �

completely mounted on the actuation blockAdjustable flush volume 6 or 9 litres �Water-proof battery compartment including lithium battery, �

type 2CR5, 6 V DC



WG 904 | RG 3


TECEplanus toilet remote triggering for cable-connected electronic button, 230/12 V mains

Like 9.240.356, but for power supply by external 230/12 V transformer (transformer not contained in the scope of delivery).



(see page 97)



WG 904 | RG 3



94

TECEplanus urinal electronics, 6 V battery

Fine assembly set for contact-free infrared flush device.Fits TECE urinal flush valve housing, usable from 0.5 bar minimum flow pressure. Flush time, water-saving break function, cleaning mode, pre-flush and hygienic flushing can be set.

Consisting of:Solenoid valve with large dirt filter �6 V DC battery �Screw-down metal cover with sensor field �Fixing material �Fixing material �

100 x 120 x 12 mm

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEplanus White, silk-mat 9.242.354 1 pc. 10 pcs. --TECEplanus Brushed stainless steel 9.242.350 1 pc. 10 pcs. --TECEplanus Bright chrome 9.242.351 1 pc. 10 pcs. --TECEplanus White shiny 9.242.356 1 pc. 10 pcs. --

TECEplanus urinal electronics, 230/12 V mains

Like 9.242.350/9.242.351/9.242.354

but withmains operation by external 230/12 V transformer �

(not contained in the scope of delivery)



(see page 97)

WG 904 | RG 3

Description Colour Order No. DU1 DU2 DU3TECEplanus White, silk-mat 9.242.355 1 pc. 10 pcs. --TECEplanus Brushed stainless steel 9.242.352 1 pc. 10 pcs. --TECEplanus Bright chrome 9.242.353 1 pc. 10 pcs. --TECEplanus White shiny 9.242.357 1 pc. 10 pcs. --


95

TECEplanus electronic flushing systems and accessories

TECEplanus transformer for 230/12 V mains electronics, toilet/urinal

For assembly in standard flush-mounted ø 60 mm sockets, up to 5 urinal or toilet power connectionsPower: 230 V Output: 12 V DC

WG 904 | RG 3


TECEplanus power cable for 12 V mains electronics, toilet/urinal

Twin-core power cable: 10 m

WG 904 | RG 3


TECEplanus remote button

Retrofit kit for supporting safety support arm, suitable for TECE toilet remote triggering system

WG 904 | RG 3


All toilet flush handles operate like a top-level bathroom fitting with high-quality ease of operation – don’t press - turn. For the first time, it is possible to operate the dual flush func-tion using a single control element.

TECE flush handle partners:

TECE flushing system – the toilet flush handle with a rotary mechanism

Why should attractive bathroom design stop when it comes to the toilet flush? The rotary mechanism developed by TECE makes ist possible to match toilet actuations with the design of high-quality fitting series for the first time.

The toilet flush handle - the idea underlying the series

The various handle manufacturers fit TECE’s rotary mechanism with a faceplate and control element to match the design of the handle series.

Company: HansaSeries: Designo

Company: Dornbrachtapplicable for all series

Company: Emcoapplicable for all series

Company: JadoSeries: Glance, Geometry, IQ

Company: KludiSeries: Kido

Company: International BathroomsSeries: St. James Collection

Company: KludiSeries: JOOP

Company: Emcoapplicable for all series

Company: SAMSeries: Way

Company: HansaSeries: Murano

Company: JadoSeries: Lighthouse

Company: OrasSeries: Il Bagno Alessi by Oras

96

Toilet flush handles

97

TECEbase toilet push plate


1 9.820.241 Button set, white 3/9042 9.820.020 Button springs, set of two 3/9043 9.820.022 Actuation rods 3/9044 9.820.030 Extension set (by max. 12 cm) 3/904

TECEambia toilet push plate


1 9.820.020 Button springs, set of two 3/9042 9.820.021 Locking rubber 3/9043 9.820.024 Rubber buffer, set of two 3/9044 9.820.022 Actuation rods 3/9045 9.820.030 Extension set (by max. 12 cm) 3/904

TECEplanus toilet push plate


1 9.820.020 Button springs, set of two 3/9042 9.820.021 Locking rubber 3/9043 9.820.024 Rubber buffer, set of two 3/9044 9.820.022 Actuation rods 3/9045 9.820.030 Extension set (by max. 12 cm) 3/904

TECE push plates – spare parts

98


TECEloop toilet push plate, glass


1 9.820.180 Bow-type handles 3/9042 9.820.181 Adjustment bolt 18 to 33 mm

(extension)3/904

3 9.820.196 Toilet support frame for flush-mounted installation

3/904

Toilet electronics

TECEplanus IR electronics, 6 V battery


1 9.820.092 6 V battery 2CR5 3/9042 9.820.195 Battery housing 3/9043 9.820.140 Motor with splash guard 3/9044

9.820.1999.820.200

TECEplanus push plateBrushed stainless steelBright chrome

3/9043/904

5 9.820.198 IR sensor 6 V 3/9046 9.820.080 Programming stick 3/904

TECEplanus IR electronics, 230/12 V mains


1 9.820.094 Mains connection adapter 3/9042 9.820.140 Motor with splash guard 3/9043

9.820.1999.820.200

TECEplanus push plateBrushed stainless steelBright chrome

3/9043/904

4 9.820.201 IR sensor 12 V 3/9045 9.820.080 Programming stick 3/904

99


TECEplanus toilet remote triggering, 6 V battery


1 9.820.202 Battery housing, long 3/9042 9.820.140 Motor with splash guard 3/9043 9.820.203 Remote electronics 6 V 3/904

TECEplanus toilet remote triggering, 230/12 V mains


1 9.820.094 Mains connection adapter 3/9042 9.820.140 Motor with splash guard 3/904 3 9.820.204 Remote electronics 12 V 3/904

TECEplanus toilet remote release for cable-connected electric push-button, 6 V battery


1 9.820.092 6 V battery 2CR5 3/9042 9.820.195 Battery housing 3/9043 9.820.140 Motor with splash guard 3/9044 9.820.205 Electronics 6 V, cable-connected 3/904

TECEplanus toilet remote release for cable-connected electric button, 230/12 V mains


1 9.820.094 Mains connection adapter 3/9042 9.820.140 Motor with splash guard 3/9043 9.820.206 Electronics 12 V, cable-connected 3/904

100


Urinal push plates

TECEambia urinal push plate


19.820.0819.820.1299.820.130

TECEambia push plateWhiteWhite, antibacterialPergamon grey

3/9043/9043/904

2 9.820.097 Fastening screw 3/9043 9.820.091 Hollow hexagon wrench 3/9044 9.820.020 Button springs, set of two 3/9045 9.820.024 Rubber buffer, set of two 3/9046 9.820.031 Cartridge 3/9047 9.820.095 Extension set (max. 13 cm) 3/904

TECEplanus urinal push plate


19.820.0829.820.0839.820.084

TECEplanus push plateWhite, silk-matBrushed stainless steelBright chrome

3/9043/9043/904

2 9.820.097 Fastening screw 3/9043 9.820.091 Hollow hexagon wrench 3/9044 9.820.020 Button springs, set of two 3/9045 9.820.024 Rubber buffer, set of two 3/9046 9.820.031 Cartridge 3/9047 9.820.095 Extension set (max. 13 cm) 3/904

TECEloop urinal push plate, plastic

Item Order No. Description RG/WG1

9.820.182 9.820.186 9.820.1879.820.1839.820.1849.820.185

TECEloop push plate White White antibacterial White, button bright chromePergamon greyMatte chromeBright chrome

3/9043/9043/9043/9043/9043/904

2 9.820.031 Cartridge 3/904

101


TECEloop urinal push plate, glass

Item Order No. Description RG/WG1

9.820.169 9.820.178 9.820.179

9.820.170 9.820.171 9.820.172

9.820.173 9.820.174 9.820.175

9.820.176 9.820.177

TECEloop push plate White glass white button, White glass, chrome matte button White glass, bright chrome button

Green glass, white push-button Green glass, chrome matte buttonGreen glass, bright chrome button

Black glass, button white Black glass, button chrome matte

Black glass, button bright chrome

Black glass, button black Black glass, button bright gold

3/9043/9043/904

3/9043/9043/904

3/9043/904

3/904

3/9043/904

2 9.820.031 Cartridge 3/9043 9.820.180 Bow-type handles 3/9044 9.820.181 Adjustment bolt 18 to 33 mm

(extension)3/904

5 9.820.197 Urinal support frame for flush-mounted installation

3/904

102


Urinal electronics

TECEplanus urinal electronics, 6 V battery


1 9.820.093 Battery connection adapter 3/904

2 9.820.092 6 V battery 3/904

39.820.0989.820.0859.820.086

TECEplanus cover plateWhite, silk-matBrushed stainless steelBright chrome

3/9043/9043/904

4 9.820.089 Urinal cartridge, electric 3/904

5 9.820.090 Sieve grid 3/904

6 9.820.080 Programming key 3/904

7 9.820.087 Infrared sensor 6 V battery 3/904

8 9.820.097 Fastening screw 3/904

9 9.820.091 Hollow hexagon wrench 3/904

10 9.820.211 Additional vandalproofing 3/904

TECEplanus urinal electronics, 230/12 V mains


1 9.820.094 Mains connection adapter 3/904

29.820.0989.820.0859.820.086

TECEplanus cover plateWhite, silk-matBrushed stainless steelBright chrome

3/9043/9043/904

3 9.820.089 Urinal cartridge, electric 3/904

4 9.820.090 Sieve grid 3/904

5 9.820.080 Programming key 3/904

6 9.820.088 Infrared sensor 12 V mains 3/904

7 9.820.097 Fastening screw 3/904

8 9.820.091 Hollow hexagon wrench 3/904

9 9.820.211 Additional vandalproofing 3/904

Order No. WG RG Page

9.000.000 900 3 8

9.010.002 900 3 8

9.010.003 900 3 31

9.010.009 900 3 32

9.018.002 900 3 31

9.018.007 900 3 32

9.020.004 900 3 27

9.020.016 900 3 17

9.020.018 900 3 20

9.020.019 900 3 26

9.020.020 900 3 27

9.020.033 900 3 20

9.020.034 900 3 20

9.020.036 900 3 27

9.020.038 905 3 23

9.020.039 905 3 23

9.020.040 900 3 26

9.020.041 900 3 26

9.020.044 900 3 20

9.020.045 900 3 27

9.021.015 900 3 27, 67

9.021.017 900 3 27, 67

9.021.019 900 3 8

9.021.020 900 3 27

9.030.002 900 3 8

9.030.011 900 3 8

9.030.013 900 3 8

9.030.017 900 3 33

9.030.024 903 3 54

9.030.026 912 65

9.030.028 900 3 33

9.030.029 903 3 57, 66,81, 86

9.040.001 900 3 32

9.040.004 900 3 32

9.041.006 905 3 17

9.041.008 905 55

9.042.003 900 3 28

9.042.005 900 3 28

9.042.010 905 3 13

9.042.011 905 3 13

9.042.012 905 3 13

9.042.013 905 3 13

9.140.000 900 3 33

9.150.000 900 3 26

9.200.000 900 3 35

9.200.001 900 3 35

9.200.002 900 3 35

9.200.010 900 3 34/67


9.200.012 903 3 56

9.221.011 912 67

9.221.013 70

9.240.100 904 3 77

9.240.101 904 3 77

9.240.125 904 3 77

9.240.126 904 3 77

9.240.140 904 3 77

9.240.200 904 3 77

9.240.201 904 3 77

9.240.225 904 3 77

9.240.226 904 3 77

9.240.240 904 3 77

9.240.253 904 3 77

9.240.254 904 3 77

9.240.310 904 3 89

9.240.311 904 3 89

9.240.312 904 3 89

9.240.314 904 3 89

9.240.320 904 3 89

9.240.321 904 3 89

9.240.322 904 3 89

9.240.324 904 3 89

9.240.350 904 3 91

9.240.351 904 3 91

9.240.352 904 3 91

9.240.353 904 3 91

9.240.354 904 3 92

9.240.355 904 3 92

9.240.356 904 3 93

9.240.357 904 3 93

9.240.360 904 3 95

9.240.361 904 3 91

9.240.362 904 3 91

9.240.600 904 3 79

9.240.601 904 3 79

9.240.625 904 3 79

9.240.626 904 3 79

9.240.627 904 3 79

9.240.640 904 3 79

9.240.646 904 3 81, 85

9.240.647 904 3 81, 85

9.240.648 904 3 81, 85

9.240.649 904 3 81, 85

9.240.650 904 3 79

9.240.651 904 3 79

9.240.652 904 3 79

9.240.653 904 3 79


9.240.654 904 3 79

9.240.655 904 3 79

9.240.656 904 3 79

9.240.657 904 3 79

9.240.658 904 3 79

9.240.659 904 3 79

9.240.660 904 3 79

9.240.663 904 3 80

9.240.664 904 3 80

9.240.665 904 3 80

9.240.666 904 3 80

9.240.667 904 3 80

9.240.668 904 3 80

9.240.669 904 3 80

9.240.670 904 3 80

9.240.671 904 3 80

9.240.672 904 3 80

9.240.673 904 3 80

9.240.674 904 3 80

9.240.675 904 3 80

9.240.676 904 3 80

9.240.677 904 3 80

9.240.678 904 3 80

9.240.679 904 3 80

9.240.680 904 3 80

9.240.683 904 3 80

9.240.684 904 3 80

9.240.685 904 3 80

9.240.700 904 3 75

9.240.701 904 3 75

9.240.702 904 3 75

9.240.800 904 3 86

9.240.801 904 3 86

9.240.802 904 3 86

9.240.803 904 3 86

9.240.804 904 3 86

9.240.805 904 3 86

9.240.806 904 3 86

9.240.807 904 3 86

9.240.808 904 3 86

9.240.809 904 3 86

9.240.810 904 3 85

9.240.811 904 3 85

9.240.812 904 3 85

9.242.100 904 3 77

9.242.101 904 3 77

9.242.126 904 3 77

9.242.140 904 3 77

103

Quick search for articles


9.242.310 904 3 89

9.242.311 904 3 89

9.242.312 904 3 89

9.242.314 904 3 89

9.242.350 904 3 94

9.242.351 904 3 94

9.242.352 904 3 94

9.242.353 904 3 94

9.242.354 904 3 94

9.242.355 904 3 94

9.242.356 904 3 94

9.242.357 904 3 94

9.242.600 904 3 82

9.242.601 904 3 82

9.242.625 904 3 82

9.242.626 904 3 82

9.242.627 904 3 82

9.242.640 904 3 82

9.242.646 904 3 83

9.242.647 904 3 83

9.242.648 904 3 83

9.242.649 904 3 83

9.242.650 904 3 82

9.242.651 904 3 82

9.242.652 904 3 82

9.242.653 904 3 82

9.242.654 904 3 82

9.242.655 904 3 82

9.242.656 904 3 82

9.242.657 904 3 82

9.242.658 904 3 82

9.242.659 904 3 82

9.242.660 904 3 80

9.300.000 905 3 9

9.300.001 905 3 11

9.300.003 905 3 14

9.300.007 905 3 12

9.300.022 905 3 10

9.300.033 905 3 14

9.300.040 912 66

9.300.044 905 3 15

9.310.000 900 3 18

9.310.002 900 3 19

9.310.004 900 3 19

9.310.011 900 3 18

9.320.008 905 3 22

9.320.010 900 3 22

9.330.000 900 3 24


9.330.005 900 3 24

9.340.000 900 3 25

9.360.000 900 3 28

9.370.000 903 3 54

9.370.007 912 64

9.370.008 912 64

9.370.009 912 65

9.370.021 903 3 57

9.370.031 912 66

9.370.032 912 67

9.370.033 903 3 57

9.371.000 903 3 56

9.375.000 903 3 55

9.380.000 900 3 29, 37 ff.

9.380.001 900 3 29

9.380.002 900 3 30

9.380.003 900 3 30

9.380.004 900 3 30

9.380.005 900 3 31

9.380.006 900 3 31

9.380.007 900 3 29

9.510.003 900 3 21

9.810.003 904 3 95

9.810.004 904 3 95

9.820.000 905 3 36

9.820.003 905 3 36, 49

9.820.004 905 3 36, 49

9.820.005 905 3 36, 49

9.820.006 905 3 36, 49, 69, 70

9.820.007 905 3 49, 70

9.820.008 905 3 49, 70

9.820.009 905 3 36, 49, 69

9.820.010 905 3 36, 49, 69, 70

9.820.011 905 3 37 ff., 58 ff.

9.820.012 905 3 48, 70

9.820.013 905 3 48, 70

9.820.014 905 3 48, 70

9.820.015 905 3 37 ff., 48 ff., 68 ff.

9.820.016 905 3 36, 48

9.820.017 905 3 48

9.820.018 905 3 36, 48

9.820.019 905 3 36, 48

9.820.020 904 3 36, 100

9.820.021 904 3 97

9.820.022 904 3 48, 97

9.820.024 904 3 97, 99

9.820.025 905 3 48

9.820.026 905 3 48


9.820.027 905 3 48

9.820.029 905 3 36, 49

9.820.030 904 3 97

9.820.031 904 3 100, 101

9.820.034 905 3 41 ff.

9.820.035 900 3 41 ff.

9.820.037 905 3 41

9.820.038 900 68

9.820.040 905 3 37 ff.

9.820.042 905 3 37 ff.

9.820.043 905 3 37 ff., 58

9.820.044 900 3 37 ff., 42 ff.

9.820.047 900 3 44, 45

9.820.049 903 3 58, 68

9.820.050 903 3 58

9.820.051 903 3 58

9.820.054 900 3 46

9.820.055 900 3 34, 43, 44

9.820.057 905 3 37 ff., 58, 68

9.820.059 900 3 42 ff.

9.820.063 900 3 41

9.820.065 905 3 41

9.820.066 905 3 41

9.820.067 900 3 42

9.820.069 900 3 34

9.820.070 900 3 42

9.820.071 900 3 37 ff., 45 ff.

9.820.072 900 3 37 ff., 42 ff.

9.820.073 903 3 58

9.820.074 905 3 43, 44

9.820.075 905 3 43

9.820.076 905 3 43, 44

9.820.078 905 3 39

9.820.079 900 3 43

9.820.080 904 3 98, 102

9.820.081 904 3 100

9.820.082 904 3 100

9.820.083 904 3 100

9.820.084 904 3 100

9.820.085 904 3 102

9.820.086 904 3 102

9.820.087 904 3 102

9.820.088 904 3 102

9.820.089 904 3 102

9.820.090 904 3 102

9.820.091 904 3 100, 102

9.820.092 904 3 98, 99, 102

9.820.093 904 3 102

104



9.820.094 904 3 98, 99, 102

9.820.095 904 3 100

9.820.096 900 3 45

9.820.097 904 3 100, 102

9.820.098 904 3 102

9.820.099 905 3 37, 48

9.820.100 905 3 48

9.820.101 905 3 48

9.820.102 905 3 44

9.820.103 905 3 48

9.820.105 905 3 44

9.820.125 900 3 46

9.820.126 905 3 39

9.820.127 905 3 39

9.820.128 900 3 46

9.820.129 904 3 100

9.820.130 904 3 100

9.820.132 905 3 49

9.820.133 900 3 43

9.820.134 905 3 37 ff., 46

9.820.135 905 3 46, 58

9.820.136 905 3 34, 37 ff., 58

9.820.139 905 3 37 ff., 58

9.820.140 904 3 98, 101

9.820.143 905 68

9.820.144 905 68

9.820.145 905 37 ff., 58, 68

9.820.146 905 68

9.820.147 905 68

9.820.148 905 69

9.820.149 905 69

9.820.150 905 68

9.820.151 905 69

9.820.152 905 69

9.820.153 905 69

9.820.161 905 69, 70

9.820.163 905 69, 70

9.820.165 905 70

9.820.169 904 3 100

9.820.170 904 3 100

9.820.171 904 3 100

9.820.172 904 3 100

9.820.173 904 3 100

9.820.174 904 3 100

9.820.175 904 3 100

9.820.176 904 3 100

9.820.177 904 3 101

9.820.178 904 3 101


9.820.179 904 3 101

9.820.180 904 3 98, 101

9.820.181 904 3 98, 101

9.820.182 904 3 100

9.820.183 904 3 100

9.820.184 904 3 100

9.820.185 904 3 100

9.820.186 904 3 100

9.820.187 904 3 100

9.820.188 905 70

9.820.189 905 69, 70

9.820.190 905 69, 70

9.820.191 905 69, 70

9.820.192 905 68, 70

9.820.193 905 3 69

9.820.194 905 70

9.820.195 904 3 98, 99

9.820.196 904 3 98

9.820.197 904 3 101

9.820.198 904 3 98

9.820.199 904 3 98

9.820.200 904 3 98

9.820.201 904 3 98

9.820.202 904 3 99

9.820.203 904 3 99

9.820.204 904 3 99

9.820.205 904 3 99

9.820.206 904 3 99

9.820.211 904 3 102

9.820.213 905 3 47

9.820.214 905 3 47

9.820.215 905 3 69

9.820.216 905 3 69

9.820.217 905 3 69, 70

9.820.218 905 3 69

9.820.219 905 3 69

9.820.220 905 3 69

9.820.221 905 3 69, 70

9.820.222 905 3 69

9.820.223 905 3 49

9.820.224 905 69, 70

9.820.228 905 3 69

9.820.229 905 3 49

9.820.230 905 3 49

9.820.231 905 3 49

9.820.233 905 3 49

9.820.241 904 3 97

9.820.245 905 47

105


9.820.246 904 3 97

9.820.251 905 70

9.820.254 905 3 37 ff., 68

9.820.255 905 68

9.820.256 905 68

9.850.016 900 3 36

9.880.034 900 3 16

9.880.037 900 3 16

9.980.067 900 3 34


Notes

DS

00

1 0

02

78

a

� TECEflex� TECElogo� TECEprofil� TECE flushing technology� TECEbox� TECEbox 8 cm� TECE push plates� TECEsystem � TECEdrainline� TECEdrainboard� TECEstandardline� TECEbasika drainage technology� TECEbasika separation technology� TECE software

TECE GmbHInternational Business

Hollefeldstraße 57 48282 EmsdettenGermany

Phone +49 (0) 25 72 / 928 999 Fax +49 (0) 25 72 / 928 204

[email protected] www.tece.biz

Date post:	04-Jun-2019
Category:	Documents
Upload:	vandien
View:	215 times
Download:	0 times

TECE flushing technology Assortment List - Instalaţii de ... · 7.5 l 6.0 l 4.5 l 3.0 l 6...

Documents