Date post: | 19-Feb-2016 |
Category: |
Documents |
Upload: | xavier-rivas |
View: | 220 times |
Download: | 0 times |
american nicaraguan schoolconnecting the global community
technology.ans.edu.ni
Mimio Teach/Wireless Setup Checklist
Mimio Xi1|Mimio Mouse2|USB Cable or Hub
Mimio Power Cable
Data ShowPower Cable
Data ShowRemote Control
3|
Mimio StudioSo�ware
4|
Data ShowOutlet is ON
Connected to Computer
5|Computer6|
HDMI Cable7|8|9|10|11| Connected to Data Show
HDMI Cable
Using Mounted DataShow1) Make sure the datashow power outlet is on (active).2) Turn on the datashow.3) Make sure your computer HDMI cable is connected to the HDMI outlet and computer.
Press Key + P, to connect to the datashow. Choose a mode: duplicate, extend or just projector.
Having problems seeing your desktop into the whiteboard?
Speakers12|Speakers’Cables13|