TECHNICAL AMENDMENT NO.: 01 DISCIPLINE: INSTRUMENTATION
Page 1 of 4
TECHNICAL AMENDMENT NO. : 01
TO
BIDDING DOCUMENT NO. : A918-160-16-50-EJ-T-0150
(ELECTRICAL & INSTRUMENTATION WORKS FOR GTU)
FOR
PROJECT: GTU, M/s BPCL, MUMBAI
A918-160-16-50-EJ-R-0150 (PART-B) 02.08.2018 ISSUED AS AMENDMENT IS DY KS
REFERENCE DOC. DATE REVISIONS BY CHECKED APPROVED
TECHNICAL AMENDMENT NO.: 01 DISCIPLINE: INSTRUMENTATION
Page 2 of 4
SUBJECT : Technical Amendment-1 BIDDING DOCUMENT NO. : A918-160-16-50-EJ-T-0150 (ELECTRICAL & INSTRUMENTATION WORKS FOR GTU) The terms, conditions of Bidding Document stand modified to the extent indicated under column “MODIFICATIONS/ ADDITIONS/ DELETIONS”. All other terms & conditions etc. of bidding Document issued earlier shall remain unaltered.
Sl.
No. Section No./ Document No. Clause No./ Item No. Subject Modifications/Additions/Deletions
1. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 9, 10, 11, 12 of
SOR Pressure Gauge
Installation Drawing No. HY-D-4-33700-39815 referred in the SOR clause is attached.
2. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 29 of SOR
Differential Pressure gauge Installation
Drawing No. HY-D-4-33700-39815 referred in the SOR clause is attached.
3. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 50, 51 of SOR
Pressure transmitter Installation
Drawing No. HY-D-4-33700-39815 referred in the SOR clause is attached.
4. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 60, 61 of SOR
Differential pressure transmitter Installation
Drawing No. HY-D-4-33700-39815 referred in the SOR clause is attached.
5. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 77 of SOR
Flow transmitter Installation
Drawing No. HY-D-4-33700-39815 referred in the SOR clause is attached.
6. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 19 of SOR
Pressure Gauge Installation
Refer sheet-4 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
TECHNICAL AMENDMENT NO.: 01 DISCIPLINE: INSTRUMENTATION
Page 3 of 4
Sl.
No. Section No./ Document No. Clause No./ Item No. Subject Modifications/Additions/Deletions
7. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 20 of SOR
Pressure Gauge Installation
Refer sheet-4 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
8. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 21 of SOR
Pressure Gauge Installation
Refer sheet-6 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
9. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 22 of SOR
Pressure Gauge Installation
Refer sheet-7 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
10. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 23 of SOR
Pressure Gauge Installation
Refer sheet-8 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
11. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 26 of SOR
Differential Pressure Gauge Installation
Refer sheet-2 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
12. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 27 of SOR
Differential Pressure Gauge Installation
Refer sheet-13 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
13. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 28 of SOR
Differential Pressure Gauge Installation
Refer sheet-14 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
14. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 46 of SOR
Pressure transmitter Installation
Refer sheet-3 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
15. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 47 of SOR
Pressure transmitter Installation
Refer sheet-3 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
16. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 48 of SOR
Pressure transmitter Installation
Refer sheet-9 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
TECHNICAL AMENDMENT NO.: 01 DISCIPLINE: INSTRUMENTATION
Page 4 of 4
Sl.
No. Section No./ Document No. Clause No./ Item No. Subject Modifications/Additions/Deletions
17. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 49 of SOR
Pressure transmitter Installation
Refer sheet-12 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
18. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 52 of SOR
Pressure transmitter Installation
Refer sheet-15 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
19. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 58 of SOR
Differential Pressure transmitter Installation
Refer sheet-1 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
20. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 59 of SOR
Differential Pressure transmitter Installation
Refer sheet-10 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
21. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 95 of SOR
Level transmitter Installation
Refer sheet-5 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
22. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 96 of SOR
Level transmitter Installation
Refer sheet-11 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.
23. SOR no. A918-160-16-51-EJ-SOR-
0150-B Instrumentation works Sr. no. 267 of SOR
Supply of Fiber optic Patch chords 5 m length
each with necessary connectors at both ends
Consider the unit of measurement in SOR as “NOS” instead of “M”
(SIGNATURE AND STAMP OF BIDDER)
1
HYDERABAD
COMMENT COMPLIANCE
Date
03/05/2018
Prepared
PUNNAM
Approved
ANJI
Ref doc: Comments Dt.: 05/04/2018
1) HY-DG-4-33700-39815-R00: Instrument Installation and hookup drawings
EIL COMMENT BHEL CLARIFICATION
The drawing is updated as per comments. Please accord approval for our records.
BHEL to follow approved Hookup of BPCL DHT Project (copy attached with this
document) and modify the hook up accordingly. Noted and incorporated.
HY-DG-4-33700-39815-Hookup 1 of 1
Rev. 0 1 2 3 4 NEA Document No.:
Date 12.03.2018 09.05.2018 27.06.2018
160-K-0001-970509-02-08 Created JW JW JW
Checked VF VF VF
Approved SKP SKP SKP
NNEEUUMMAANN && EESSSSEERR
GGRROOUUPP
Cover Sheet
Instrument Hook ups Customer : BPCL, MAHUL MUMBAI Consultant : Engineers India Limited. Customer Order No. : - Installation Site : Mahul Mumbai, India Service : H2 Make Up Compressor
Item : 160-K-0001 A/B Equipment Tag No. : As Shown on Document Supplier : Neuman & Esser NEA Order No. : 970509 Compressor type : 1 TEL 30 Quantity : 2
Material Requisition No. : A918-160-KA-MR-5010
Purchase Requisition No: A918-160-KA-PR-5010-07
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 1 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
• Final BOM & Routine is as per Isometric drawing.
Instrument description:
Differential Pressure Transmitter
(Gauge Board Mounted)
Tag no: 160-GPDT-1230/1265
No. Qt
y. UNIT MATERIAL DESCRIPTION
14 2 Nos. Differential Pressure Transmitter with Integral 5 Valve Manifold - flanged x ½”NPTF SS316 with mounting bolts and PTFE O-ring.
1 4 Nos. Pipe 3/4".(MOC As Per PMS:- B5A)
2 4 Nos. Equal Tee ¾” X ½” (MOC As Per PMS:- B5A)
3 4 Nos. Pipe 3/4".(MOC As Per PMS:- B5A)
4 4 Nos. Pipe nipple PE X ½” NPT.(MOC As Per PMS:- B5A)
5 4 Nos. Vent Gate Valve, 1/2" SW.(MOC As Per PMS:- B5A)
6 4 Nos. Equal Tee, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)
7 6 Nos. Elbow, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)
8 30 Mtrs. Pipe 1/2" .(MOC As Per PMS:- B5A)
9 4 Nos. Pipe 1/2" (PE X TH) .(MOC As Per PMS:- B5A)
10,11,12,13 12 Nos. ½” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)
15,16,17,18 4 Nos. ¾” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)
Service: Gas (Process Gas)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 2 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
• Final BOM & Routine is as per Isometric drawing.
Instrument description:
Differential Pressure Gauge (Gauge Board Mounted)
Tag no: 160-GPDG-1231/1266
No. Qty. UNIT MATERIAL DESCRIPTION
14 2 Nos. Differential Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M)
1 4 Nos. Pipe 3/4".(MOC As Per PMS:- B5A)
2 4 Nos. Equal Tee ¾” X ½” (MOC As Per PMS:- B5A)
3 4 Nos. Pipe 3/4".(MOC As Per PMS:- B5A)
4 4 Nos. Pipe nipple PE X ½” NPT.(MOC As Per PMS:- B5A)
5 4 Nos. Vent Gate Valve, 1/2" SW.(MOC As Per PMS:- B5A)
6 4 Nos. Equal Tee, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)
7 6 Nos. Elbow, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)
8 30 Mtrs. Pipe 1/2" .(MOC As Per PMS:- B5A)
9 4 Nos. Pipe 1/2" (PE X TH) .(MOC As Per PMS:- B5A)
10,11,12,13 12 Nos. ½” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)
15,16,17,18 4 Nos. ¾” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)
19 2 Nos. 5 Valve manifold 1/2" NPTF x 1/2” NPTF, SS316 & 1/4" NPT vent hole with plug
Service: Gas (Process Gas)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 3 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
• Final BOM & Routine is as per Isometric drawing.
Instrument Description:
Pressure Transmitter
(Gauge Board Mounted) Tag no: 160-GPT-1233/1268, 160-GPT-1236/1271A, 160-
GPT-1236/1271B, 160-GPT-1236/1271C,160-GPT-1235/1270
No. Qty. UNIT MATERIAL DESCRIPTION
14 10 Nos. Pressure Transmitter with Integral 2 Valve Manifold - flanged x 1/2” NPTF SS316 with mounting bolts and PTFE O-ring.
1 10 Nos. Pipe 3/4".(MOC As Per PMS:- B5A)
2 10 Nos. Equal Tee ¾” X ½” (MOC As Per PMS:- B5A)
3 10 Nos. Pipe 3/4".(MOC As Per PMS:- B5A)
4 10 Nos. Pipe nipple PE X ½” NPT.(MOC As Per PMS:- B5A)
5 10 Nos. Vent Gate Valve, 1/2" SW.(MOC As Per PMS:- B5A)
6 10 Nos. Equal Tee, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)
7 30 Nos. Elbow, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)
8 100 Mtrs. Pipe 1/2" .(MOC As Per PMS:- B5A)
9 10 Nos. Pipe 1/2" (PE X TH) .(MOC As Per PMS:- B5A)
10,11,12,13 30 Nos. ½” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)
15,16,17,18 10 Nos. ¾” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)
Service: Gas (Process Gas)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 4 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
• Final BOM & Routine is as per Isometric drawing.
Instrument Description:
Pressure Gauge
(Gauge Board Mounted) Tag no: 160-GPG-1232/1267, 160-GPG-1234/1269
No. Qty. UNIT MATERIAL DESCRIPTION
14 4 Nos. Pressure Gauge with 2-Valve Manifold
1 4 Nos. Pipe 3/4".(MOC As Per PMS:- B5A)
2 40 Nos. Equal Tee ¾” X ½” (MOC As Per PMS:- B5A)
3 40 Nos. Pipe 3/4".(MOC As Per PMS:- B5A)
4 40 Nos. Pipe nipple PE X ½” NPT.(MOC As Per PMS:- B5A)
5 40 Nos. Vent Gate Valve, 1/2" SW.(MOC As Per PMS:- B5A)
6 40 Nos. Equal Tee, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)
7 40 Nos. Elbow, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)
8 40 Mtrs. Pipe 1/2" .(MOC As Per PMS:- B5A)
9 4 Nos. Pipe 1/2" (PE X TH) .(MOC As Per PMS:- B5A)
10,11,12,13 12 Nos. ½” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)
15,16,17,18 4 Nos. ¾” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)
Service: Gas (Process Gas)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 5 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Level Transmitter (Local Mounted)
Tag no: 160-GLT-1230/(1236)
CRANKCASE /
CYLINDER
LUBRICATOR
TANK
INST.PIPING
1
23
4
5
6
7
5
9
8
No. Quantity UNIT MATERIAL DESCRIPTION
1 2 Nos. Level Transmitter 2 2 Nos. Integral 5 Valve Manifold flanged x ½”NPTF with mounting bolts and PTFE O-rings &
¼”NPT vent hole with plug 3 2 Nos. Tube Fitting 1/2" OD impulse line x ½ ”NPT (M) Connector, SS316 (Double
Compression type) 4 2 Nos. ½” NPTM male connector with bug screen 5 20 Mtrs. Tubing ½” OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 2 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 7 2 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 8 2 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting) 9 2 Nos. Tube Fitting 1/2" OD impulse line x 1” NPT (M) Connector, SS316 (Double
Compression type)
Service: Liquid (Lube Oil)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 6 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Pressure Gauge (Gauge Board Mounted)
Tag no: 160-PG-1238/(1273), 160-PG-1239/(1274), 160-PG-1257,160-PG-1258
PIPING INST.
1
34
9
6
2
5
7 8
No. Quantity UNIT MATERIAL DESCRIPTION
1 6 Nos. Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 6 Nos. Snubber 1/2" NPT(F) x 1/2” NPT (M) SS316 3 6 Nos. 2-valve Manifold 1/2"NPTF x 1/2" NPTF, SS316 & 1/4"NPT vent hole with plug 4 6 Nos. Tube Fitting 1/2” OD impulse line x ½” NPT (M) Connector, SS316
(Double Compression type) 5 60 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 6 Nos. Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316 (Double Compression type) 7 6 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 8 6 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 9 6 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)
Service: Liquid (Lube oil & Cooling Water)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 7 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Pressure Gauge (Gauge Board Mounted)
Tag no: 160-PG-1249/(1284),
5
PIP
ING
INS
T.
6
1
34
5 2
No. Quantity UNIT MATERIAL DESCRIPTION
1 2 Nos. Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 2 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting) 3 2 Nos. Block & Bleed valve 1/2" NPTF x 1/2” NPTF, SS316 & 1/4"NPT vent hole with plug 4 2 Nos. Tube Fitting 1/2” OD impulse line x 1/2" NPT (M) Connector, SS316
(Double Compression type) 5 20 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 2 Nos. Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316 (Double Compression type)
Instrument description:
Pressure Gauge (Gauge Board Mounted)
Tag no: 160-PG-1260, 160-PG-1256(1291), 160-PG-1246/(1281)
Service: N2 Purge
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 8 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
PIPING INST.
1
34
9
6
2
5
7 8
No. Quantity UNIT MATERIAL DESCRIPTION
1 5 Nos Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 5 Nos. Gauge Saver 1/2" NPT(F) x 1/2” NPT (M) SS316 3 5 Nos Block & Bleed valve 1/2" NPTF x 1/2” NPTF, SS316 & 1/4"NPT vent hole with plug 4 5 Nos Tube Fitting 1/2” OD impulse line x 1/2" NPT (M) Connector, SS316
(Double Compression type) 5 50 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 5 Nos Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316 (Double Compression type) 7 5 Nos Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 8 5 Nos Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 9 5 Nos Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)
Service: Liquid (CW), purge & LO
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 9 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Pressure Transmitters (Gauge Board Mounted)
Tag no: 160-PT-1247/(1282A),160-PT-1247B/(1282B), 160-PT-1247C/(1282C),160-PT-1245/(1280)
4
PIPING INST.
51
2
3
4
8
6
7
No. Quantity UNIT MATERIAL DESCRIPTION
1 8 Nos. Pressure Transmitter 2 8 Nos. Integral 2 Valve Manifold flanged x 1/2"NPTF SS316 with mounting bolts and PTFE O-
ring & 1/4"NPT vent hole with plug 3 8 Nos. Tube Fitting 1/2” OD impulse line x 1/2"NPT (M) Connector, SS316
(Double Compression type) 4 80 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 5 8 Nos. Tube Fitting 3/4”NPTM x 1/2” OD male connector in SS316 (Double Compression type) 6 8 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 7 8 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 8 8 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)
Service: Liquid (Lube oil)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 10 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Differential Pressure Transmitter (Gauge Board Mounted)
Tag no: 18-PDT-1242/(1277), 18-PDT-1259
1
2 3
3
PIPINGINST.
PIPINGINST.
4
4
5
6
76
7
4
4
8
8
HP
LP
LP
HP
No. Quantity UNIT MATERIAL DESCRIPTION
1 3 Nos. Differential Pressure Transmitter
2 3 Nos. Integral 5 Valve Manifold flanged x ½”NPTF with mounting bolts and PTFE O-rings & ¼”NPT vent hole with plug
3 6 Nos. Tube Fitting 1/2” OD impulse line x ½” NPT (M) Connector, SS316 (Double Compression type)
4 60 Mtrs. Tubing ½” OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube
5 6 Nos. Tube Fitting ¾”NPTM x 1/2” OD male connector in SS316 (Double Compression type)
6 6 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type)
7 6 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug.
8 6 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)
Service: Liquid (Lube oil & CW)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 11 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Level Transmitter (Local Mounted)
Tag no: 160-GLT-1235
COOLING
WATER TANK
160-T-0001
7 8
H P
2
4
3
1
6
5
4
3
10
L P
9
No. Quantity UNIT MATERIAL DESCRIPTION
1
1 No Level Transmitter, 1/2” NPT (Female).
2 1 No. 5 valve manifold With plug , SS316 material, connections: 1/2” NPT (Female) X 1/2” NPT (Female)
3 2 Nos. Fitting 1/2” OD impulse line x 1/2” NPT (Male) Connector, Material: SS316, (Double Compression type)
4 10 Mtrs. Tubing 1/2” OD, Thickness: 0.065”, Material: SS316L. 5 1 No Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 6 1 No. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 7 1 No. Isolation valve flange Connections: 2”CL300RF. 8 1 SET Bolts, Nuts & Gaskets (As per Mechanical Hardware List).MOC As per PMS A1A 9 1 No. 2” 300#RF Blind Flange with 1/2” NPT (F) tapping. MOC As per PMS A1A 10 1 No. Vent/mud protector 1/2” NPT (M).
Service: Liquid (Cooling Water)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 12 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Pressure Transmitter (Gauge Board Mounted)
Tag no: 160-GPT-1262A, 160-GPT-1262B, 160-GPT-1262C,160-GPT-1261, 18-GPT-1263
4
PIPING INST.
51
2
3
4
8
6
7
No. Quantity UNIT MATERIAL DESCRIPTION
1 5 Nos. Pressure Transmitter
2 5 Nos. Integral 2 Valve Manifold flanged x 1/2"NPTF SS316 with mounting bolts and PTFE O-ring & 1/4"NPT vent hole with plug
3 5 Nos. Tube Fitting 1/2" OD impulse line x 1/2"NPT (M) Connector, SS316 (Double Compression type)
4 50 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube
5 5 Nos. Tube Fitting 3/4” NPTM x 1/2” OD male connector in SS316 (Double Compression type)
6 5 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type)
7 5 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug.
8 5 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)
j
Service: Liquid (Cooling Water)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 13 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Differential Pressure Gauge (Gauge Board Mounted)
Tag no: 160-GPDG-1242/(1277),18-GPDG-1259
PIPING INST.
PIPING INST.
5
5
6
2
3 3
3
1
4
4
3
5
5
5
5
9
7
8
9
7
8
No. Quantity UNIT MATERIAL DESCRIPTION
1 3 Nos. Differential Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 3 Nos. 5 Valve manifold 1/2" NPTF x 1/2" NPTF, SS316 & 1/4"NPT vent hole with plug 3 12 Nos. Tube Fitting 1/2” OD impulse line x 1/2” NPT (M) Connector, SS316
(Double Compression type) 4 6 Nos. Tube Fitting 1/2” OD impulse line x 1/2” NPT(F) connector in SS316
(Double Compression type) 5 60 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 6 Nos. Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316 (Double Compression type) 7 6 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 8 6 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 9 6 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)
Service: Liquid (Cooling Water) & Lube Oil
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 14 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Differential Pressure Gauge (Gauge Board Mounted)
Tag no: 160-GPDG-1248/(1283)
No. Quantity UNITS MATERIAL DESCRIPTION
1 2 Nos. Differential Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 2 Nos. 5 Valve manifold 1/2" NPTF x 1/2” NPTF, SS316 & 1/4"NPT vent hole with plug 3 8 Nos. Tube Fitting 1/2" OD impulse x 1/2” NPT(M) connector in SS316
(Double Compression type) 4 4 Nos. Tube Fitting 1/2” OD impulse x 1/2” NPT(F) connector in SS316
(Double Compression type) 5 40 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 4 Nos. Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316
(Double Compression type) 7 4 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type
fitting)
Service: Gas (N2 Gas)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 15 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Pressure Transmitter (Gauge Board Mounted)
Tag no: 160-GPT-1254/(1289), 160-GPT-1255/(1290)
1
2
4
5
3
PIPING
INST.
6
No. Quantity UNITS MATERIAL DESCRIPTION
1 4 Nos. Pressure Transmitter
2 4 Nos. Integral 2 Valve Manifold flanged x ½”NPTF SS316 with mounting bolts and PTFE O-ring & ¼”NPT vent hole with plug
3 4 Nos. Tube Fitting 1/2" OD impulse line x ½ ”NPT (M) Connector, SS316
4 40 Mtrs. Tubing ½” OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube
5 4 Nos. Tube Fitting ¾”NPTM x 1/2” OD male connector in SS316
6 4 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)
Service: Gas (N2 Gas)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 16 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Level Gauge (Reflex Type) Tag no: 160-GLG-1234
Cooling Water Tank
PIPING INST
INST.
3
4
1
3
4
PIPING
2
2
No. Quantity
UNIT MATERIAL DESCRIPTION
1 1 No. Reflex type Level Gauge, 2” 300Cl RF in CS
2 2 Nos Gauge cock on level Gauge (Part of level gauge) Valve body SS and trim material SS 316.
3 2 Nos. 3/4” SW gate valve in. MOC as per A1A.
4 2 Nos. Plug 3/4” NPT.MOC as per A1A.
Service: Water (Cooling Water)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 17 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Level Gauge (Reflex Type) Tag no: 160-GLG-1232/(1238)
PACKING
LEAKAGE LIQUID
COLLECTION POT
PIPING INST
INST.
3
4
1
3
4
PIPING
2
2
No. Quantity
UNIT MATERIAL DESCRIPTION
1 2 Nos. Reflex type Level Gauge, 3/4”CL 300 RF in CS
2 4 Nos. Gauge cock on level Gauge (Part of level gauge) Valve body SS and trim material SS 316.
3 4 Nos. 1/2” SW gate valve. MOC as per A1A
4 4 Nos. Plug 1/2” NPT.MOC as per A1A.
Service: Gas (N2 + Process Gas)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 18 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Level Gauge (Reflex Type) Tag no: 160-GLG-1233/(1239)
DISTANCE PIECE
LEAKAGE LIQUID
COLLECTION POT
PIPING INST
INST.
3
4
1
3
4
PIPING
2
2
No. Quantity UNIT MATERIAL DESCRIPTION
1 2 Nos. Reflex type Level Gauge, 3/4”CL 300 RF in CS
2 4 Nos. Gauge cock on level Gauge (Part of level gauge) Valve body SS and trim material SS 316.
3 4 Nos. 1/2” SW gate valve. MOC as per A1A
4 4 Nos. Plug 1/2” NPT.MOC as per A1A.
Service: Gas(N2)
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 19 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Temperature Element (Local Mounted)
Tag no: 160-GTE-1233/(1263), 160-GTE-1232A/(1262A), 160-GTE-1232B/(1262B),160-GTE-232C/(1262C),
No. Quantity UNIT MATERIAL DESCRIPTION
1 8 Nos. Thermometer Connection -1/2” NPT (M), K-Type Thermocouple Duplex.
2 8 Nos. Extension :Nipple Union Nipple , SS 316, all Threads’ size: 1/2” NPT (M)
3 8 Nos. Thermowell, connections: 1/2” NPT (F) to instrument, Flange connections 2”CL300 RF to piping, Thermowell Material - SS 316.
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 20 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Temperature Element (Local Mounted)
Tag no: 160-GTE-1240/(1270),160-GTE-1231/(1261) 160-GTE-1239/(1269),160-GTE-1246
No. Quantity UNIT MATERIAL DESCRIPTION
1 7 Nos. Thermometer Connection -1/2” NPT (M), K-Type Thermocouple Duplex.
2 7 Nos. Extension :Nipple Union Nipple , SS 316, all Threads’ size: 1/2” NPT (M)
3 7 Nos. Thermowell, connections: 1/2” NPT (F) to instrument, Flange connections 1-1/2” CL300 RF to piping, Thermowell Material - SS 316.
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 21 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Temperature Gauge (Gauge Board Mounted)
Tag no: 160-GTG-1241/(1271),160-GTG-1245, 160-GTG-1230/(1260),160-GTG-1234/(1264)
No. Quantity UNIT MATERIAL DESCRIPTION
1 7 Nos. Gas Filled Temperature Gauge, connection: 1/2”NPT (male).
2 7 Nos. Gas Filled Capillary Armoured type for Temperature Gauge. Material: SS316, capillary length 10 Mtrs. For each Gauge.
3 7 Nos. Temperature Gauge Stem Connection Fitting-1/2” NPT(M) Compression type fitting Material:SS316
4 7 Nos. Thermowell- Instrument Connection 1/2"NPT (F), Process Connection- 1-1/2” CL300 RF Material: SS316.
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 22 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Temperature Gauge (Gauge Board Mounted)
Tag no: 160-GTG-1249/(1273), 160-GTG-1250/(1274).
P
IPIN
G
INS
T
3
1
2PIP
E
No. Quantity UNIT MATERIAL DESCRIPTION
1 4 Nos. Gas Filled Temperature Gauge, connection: 1/2”NPT (male).
2 4 Nos. Gas Filled Capillary Armoured type for Temperature Gauge. Material: SS316, capillary length 10 Mtrs. For each Gauge.
3 4 Nos. Temperature Gauge Stem Connection Fitting-1/2” NPT(M) Compression type fitting Material:SS316
4 4 Nos. Thermowell- Instrument Connection 1/2"NPT (F), Process Connection- 1-1/2” CL300 RF Material: SS316.
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 23 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description:
Temperature Gauge (Gauge Board Mounted)
Tag no: 160-GTG-12335/1265
Cranckcase
3
1
2
No. Quantity UNIT MATERIAL DESCRIPTION
1 2 Nos. Gas Filled Temperature Gauge, connection: 1/2”NPT (male).
2 2 Nos. Gas Filled Capillary Armoured type for Temperature Gauge. Material: SS316, capillary length 10 Mtrs. For each Gauge.
3 2 Nos. Thermowell- Instrument Connection 1/2"NPT (F), Process Connection- 1” NPT. Material: SS316.
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 24 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description
Bimetallic Thermometer Local Mounted
Tag no: 601-GTG-1243, 601-GTG-1247, 601-GTG-1251(1275),601-GTG-1253, 601-GTG-1255
No. Quantity/ Machine
Description
1 6 Thermometer , connection: ½ " NPT (M),
2 6 Thermowell Connections ½ " NPT (F) to instrument, Flange connections:- 1½"- 300# RF
3 6 sets Bolts, Nuts, gasket (Included in Mechanical Hardware List). MOC as per A1A
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 25 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description
Bimetallic Thermometer Local Mounted
Tag no: 601-GTG-1236 (1266), 601-GTG-1237 (1267)
No. Quantity/ Machine
Description
1 4 Thermometer , connection: ½ " NPT (M),
2 4 Thermowell Connections ½ " NPT (F) to instrument, Flange connections:- 1½"- 300# RF
3 4 sets Bolts, Nuts, gasket (Included in Mechanical Hardware List). MOC as per SS304
Neuman & Esser
Instrument Hook Ups
Order no.: 970509
Project: GTU
Supplier: NEA INDIA
Compressor Type: 1 TEL 30
Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B
Page : 26 of 26
Rev. 0 1 02 Drawing no.:
Date: 12.03.2018 09.05.2018 27.06.2018
Drawn: JVW JVW JVW
Checked: VVF VVF VVF
160-K-0001-970509-02-08
Instrument description
Bimetallic Thermometer Local Mounted
Tag no: 601-GTG-1242
PIPING INST
2
13
COOLING WATER TANK
No. Quantity Description 1 1 Thermometer , connection: ½ " NPT (M),
2 1 Thermowell Connections ½ " NPT (F) to instrument, Flange connections:- 2"- 300# RF
3 1 set Bolts, Nuts, gasket (Included in Mechanical Hardware List). MOC as per A1A