TECHNICAL AND VOCATIONAL EDUCATION
RENEWABLE ENERGY LABORATORY(5RTV)
* Center:
* Country:
* Date:
* Issue:
Quality Certificates:
Worlddidac Quality CharterCertificate
WorlddidacMember
European Union Certificate(total safety)
(Worlddidac Member)
ISO 9000: Quality Management(for Design, Manufacturing,
Commercialization and After-sales service)
Certificates ISO 14000ECO-Management and Audit Scheme
and
(environmental management)
Index
Technical and Vocational Education RenewableEnergy Laboratory(5RTV)
Ref.:5RTV-pre(01/11)
- Project content.
- Technical areas available.
- Main target.
- Project options covered.
- Project conditions.
- Teaching techniques used.
- Economical proposal.
- Main teaching units (included in priority 1).
- Classroom and Laboratory Lay Out (Example).
TRAININGMANUFACTURING
COMPLETEPACKAGE SUPPLYING
DESIGNING
(ORCAD)
ELECTRONICSELECTRONICS
(AUTOCAD)MECHANICAL DESIGNMECHANICAL DESIGN
CONTROLAPPLICATIONSDESIGN
CONTROLAPPLICATIONSDESIGN (SACED)
MANUALS
DESIGN
MANUALS
DESIGN (OFFICE)
Project content
Main blocks
Full units design
Products
Modern design
Technical and Vocational Education Renewable Energy Laboratory(5RTV)
Ref.:5RTV/pre(01/11)
Technical areas available
- Electricity.
- Fluids Mechanics & Aerodynamics.
-
-
- Complements, Instruments and Tools.
* Energy.
Thermodynamics & Thermotechnics.
Process Control.
Note: The complete technical design “is ready” at our premises
Technical and Vocational Education Renewable Energy Laboratory(5RTV)
*Main area directly related with Technical and Vocational Education Renewable EnergyLaboratory labelled in bold letters.
Ref.:5RTV-pre(01/11)
Economical Proposal
Ref.:5RTV-pre(01/11)
Technical and Vocational Education Renewable Energy Laboratory(5RTV)
Teaching Units:"Priority 1"0500. Energy 0530/20S:Basic Renewable Energies. (20 CAI + CAL).0530/PLC: PLCs Module0531/20S: Main Advanced Renewable Energies. (20 CAI + CAL).0531/PLC: PLCs Module.0532/20S:Fuel Cells. Renewable Energies (20 CAI + CAL).0532/PLC: PLCs Module.0533/20S: Bio. Renewable Energies (20 CAI + CAL).0533/PLC: PLCs Module.0534/20S: Sea. Renewable Energies (20 CAI + CAL).0534/PLC: PLCs Module0535/20S: Geothermal. Renewable Energies (20 CAI + CAL).0535/PLC: PLCs Module.0536/20S: Hidro. Renewable Energies (20 CAI + CAL).0537/20S: Organic. Renewable Energies (20 CAI + CAL)0537/PLC: PLCs Module.0538/20S: Turbine Troubleshooting. Renewable Energies (20 CAI + CAL).0538/PLC: PLCs Module.0500/ESN: EDIBON Scada-Net for Energy units .
"Priority 2"0400. Electricity 0453-450/20S: Energy Installations (20 CAI + CAL).0453-451/20S: Energy Installations (20 CAI + CAL). 0453-452/20S: Energy Installations (20 CAI + CAL). 0463K-460K/20S: Energy Installations "kit" (20 CAI + CAL).0463K-461K/20S: Energy Installations "kit" (20 CAI + CAL)0463K-462K/20S: Energy Installations "kit" (20 CAI + CAL). 0500. Energy 0510: Energy: Modular Power System Simulator. Basic Module0511: Energy: Modular Power Simulator (ESN).0520: Energy: Advanced Power Plant Simulator. Basic 0521: Energy: Advanced Power Plant Simulator. Medium 0522: Energy: Advanced Power Plant Simulator. Advanced 0800. Fluid Mechanics & Aerodynamics0813-810/20S: Elementary Fluid Mechanics (20 CAI + CAL).0813-811/20S: Elementary Fluid Mechanics (20 CAI + CAL). 0813-812/20S: Elementary Fluid Mechanics (20 CAI + CAL). 1000. Process Control 1010: Process Control. Basic Module.1010/PLC: PLC's Module 1011: Process Control. Medium Module1011/PLC: PLC's Module 1020: Industrial Process Module1020/PLC: PLC's Module 1000/ESN: EDIBON Scada-Net for Process Control units
"Priority 3"0400. Electricity 0413-410/20S: Domestic Electric Installations (20 CAI + CAL)0413-411/20S: Domestic Electric Installations (20 CAI + CAL)0413-412/20S: Domestic Electric Installations (20 CAI + CAL)
Complements, Instruments and Tools:5100. Complements, Instruments and Tools5110-1: Cupboard & Shelves Module 5120-10: Computer Module5122: Teaching Aids Module 5124: Complete Health & Safety 5142-1: Electricity Toolkit Module5143-20: Electronics Toolkit Module
Services:* Furnitures:* Electrical, Water and Air Installation and others laboratory services* Installation of all units supplied, Starting up, Training, Teacher Training and Technology Transfe
E: 1:100
25 cm
32 cm
48x35 cm
1,6 cm1,5 cm
3,3 cm
Web-cam
Computer for each Teaching Unit
Teacher and Student Desk withcomputers
Table for Teaching Unit
Table officeTeaching Unit
ElectronicInterface
INT
Cupboard
Unit
EDIBON ESN SCADA-NET
TOILET
TOILET
MAINELECTRICALCABINET
SERVICES
STAND ALONGAND
DANGEROUSUNITS
MANAGERROOM
ROOM 1
OTHER TEACHINGAND
NON TEACHING UNITS
MAINWATER
CABINET
MAINAIR
PANEL
EMERGENCY DOOR
PROJECTOR
ELEC
TR
ON
IC
BLA
CK
BO
AR
D
TEACHER
DESK
EDIBON
ESN
SCADA-NET
90
x40
90
x40
2,7
cm
STOCK
90
x60
90
x60
90x60
90x60
150x60
150x80 cm
15
0x8
0
90
x60
90
x40
90
x40
90x40
90x60 cm Shelves
15
0x8
0
90
x40
80x30 Table
ROOM 3
100x40
15
0x8
0
90
x40
15
0x8
0
90
x40
STU
DEN
TTO
ILET
90
x60
ROOM 2
150x80
SEMINARY
90
x60
COMPUTER
CONTROLLED
UNITS
1,4 cm
9cm
Classroom and Laboratory Lay Out
TECHNICAL AND VOCATIONAL EDUCATION
RENEWABLE ENERGY LABORATORY
(Example of Priority 1)(5RTV)
EXPA
NSIO
NS
SPA
CE
LOCAL NET
WITH SCADA-NET
SYSTEM
OTHER TEACHINGAND
NON TEACHING UNITS
INT INT INT INT INT INT INT INTINTINT EA5C
Unit
EC6C
Unit
EC5C
UnitEEEC
UnitEBDC
Unit
EBEC
UnitEESTC
Unit
EESFC
Unit
INTEBGC
Unit
INTINT INT INT INT INT INT INT INTINT
EG5C
Unit
ETMC
Unit
ECMC
Unit
EMMC
Unit
EG6C
Unit
THBLLC
Unit
SCE
Unit
TORC
Unit
EFTEC
Unit
INT
EOMC
Unit
INTMINI-EESTC
Unit
MIN
I-EESF
Unit
MINI-EEEC
Unit
INT
EFTNC
Unit
EBMC
Unit
Main Teaching Units(included in priority 1 )
Ref.:5RTV-pre(01/11)
Technical and Vocational Education Renewable Energy Laboratory(5RTV)
Priority 01:Priority 01:Priority 01:Priority 01:
MINI-EESTC Computer Controlled Thermal Solar Energy Basic Unit.
MINI-EEEC Computer Controlled Wind Energy Basic Unit.
MINI-EESF Photovoltaic Solar Energy Modular Trainer. (Complete Version).
EESTC Computer Controlled Thermal Solar Energy Unit.
EESFC Computer Controlled Photovoltaic Solar Energy Unit.
EEEC Computer Controlled Wind Energy Unit.
EC5C Computer Controlled PEM Fuel Cell Unit
EC6C Computer Controlled PEM Fuel Cell Advanced Unit
EA5C Computer Controlled Alkaline Fuel Cell Unit
EBDC Computer Controlled Biodiesel Process Unit.
EBEC Computer Controlled Bioethanol Process Unit.
EBGC Computer Controlled Biogas Process Unit.
EBMC Computer Controlled Biomass Process Unit.
EOMC Computer Controlled Waves Energy Unit.
EMMC Computer Controlled Tidal Energy Unit.
ECMC Computer Controlled Submarine Currents Energy Unit
ETMC Computer Controlled Ocean Thermal Energy Unit.
EG5C Computer Controlled Geothermal (low enthalpy) Energy Unit.
EG6C Computer Controlled Geothermal (high enthalpy) Energy Unit.
THBLLC Computer Controlled Heat Pump Unit (one condenser (water) and one evaporator (water)).
SCE Computer Controlled Generating Stations Control and Regulation Simulator (System Engineering).
TORC Computer Controlled Organic Rankine Cycle Unit
EFTEC Computer Controlled Turbine Electric Hub Troubleshooting Learning System
EFTNC Computer Controlled Turbine Nacelle Troubleshooting Learning System
Main target
* To help the students:
- By “quick” understanding.
- By “clear” understanding (clear concepts).
- By “saving” time.
- By “extending” the laboratory to their homes.
* To help the teachers:
- By “easy” teaching.
- By increasing the teaching “efficiency”.
- By “reducing” teaching costs (less time consume).
- By “integrating” classroom and laboratory in the same place.
Ref.:5RTV-pre(01/11)
Technical and Vocational Education Renewable Energy Laboratory(5RTV)
Project options covered
This will
cover the following:
“Technical and Vocational Education Renewable Energy Laboratory”
a) To train students at laboratory.
b) To train trainers.
c) To be used for training and update educators in current teaching
technologies.
d) To give courses to workers in the industry, as it simulates industrial
process.
e) To be used for carrying out applied research, in several processes
and different technical areas.
f) To be used as research tool for international projects.
g) To train other countries teachers.
Technical and Vocational Education Renewable Energy Laboratory(5RTV)
Ref.:5RTV-pre(01/11)
Project conditions
The includesthe following technical and commercial conditions:
“Technical and Vocational Education Renewable Energy Laboratory”
- Laboratories adaptation.- Installation of all units supplied.- Starting up for all units.- Training about the exercises to be done with any unit.- Teacher training related with the teaching unit and the teaching techniques
used.- Technology transfer.
- Packing.
- Financing Charges.
- C.I.F. Charges.
. Required services manual.
. Assembly and installation manual.
. Interface and software/control console manual.
. Set in operation manual.
. Safety norms manual.
. Practices manual.
. Maintenance manual.
. Calibration manual.
b) Commercial conditions:
c) Other conditions:
- 8 Manuals for each teaching equipment:
a) Technical conditions:
Ref.:5RTV-pre(01/11)
Technical and Vocational Education Renewable Energy Laboratory(5RTV)
3D. EDIBON THREE DIMENSIONS SYSTEM
CAI. COMPUTER AIDED INSTRUCTION SYSTEM
EDAS. EDIBON DATA ACQUISITION SYSTEM
RTC. EDIBON SYSTEM FOR HIGH ELECTRONICS (Real time control)
Unit
Unit
Unit
Unit
TeacherSoftware
StudentSoftware
Used for:Physics ( Magnetic fields,Electrical fields, Mechanics,Acoustics, Optics,Thermodynamics andFluid Mechanics)
Used for:Basic Electronics.Communications.Electricity.
Used for:High Tech Electronics(Control Electronics,Digital Electronicsand Industrial Electronics).
Used for:Basic Electronics andElectricity.Communications.Basic Mechanics.Basic Fluid Mechanics.
Interface
Interface
Data AcquisitionSoftware
Control Software
Option:SimulationSoftware
Software included:-Control-Data Acquisition-Data Management
Data acquisitonboard
Data acquisitonboard
Dataacquisiton
board
Software
Software
Software
Software
Software
+
QQ++
EE
xx
WEB: www.edibon.com
TEACHING TECHNIQUES USED
SACED. EDIBON COMPUTER CONTROL SYSTEM:Control+Data Acquisition+Data Management
PHOTOELASTICITY
HYBRID. EDIBON TEACHING HYBRID SYSTEM (ENERGY)
ESN. EDIBON SCADA-NET SYSTEM
Unit
Alarms
Some Probes
Used for:EnergyPowerPlants.
Used for:Strength
ofMaterials.
Used for:Fluid Mechanics.Aerodynamics.Thermodymanics&Thermotechnics.Process Control.ChemicalEngineering.Food Technology.Water Technology.Environment.
-Control-Data Acquisition-Data Management
Software included:
Data Acquisitonboard
Software
SimulationRESULTS
Diferences betweenthe simulation and
the photoelasticreality.
Real
WEB: www.edibon.com
UnitInterface
PLCoption
ST-4
hhCC and Humidityand Humidity
ST-5ST-5
hhBB and Humidityand Humidity
� H
(ST12, SP-2)(ST12, SP-2)
ST13, SP-1)ST13, SP-1)
14, SP-2)14, SP-2)
: This energy is absorbedThis energy is absorbed
y the refrigerant systemy the refrigerant system
((
(ST(ST
Evaporation Process
on ensa on rocessCondensation Process
�� HH:
bb
Used for:Complex Processes andComplete Laboratories