UP-DL98A-6-18WUP-DL98B-6-18W
Technical ApplicationGuide for UP-SHINELED Downlight
www.upshine.com [email protected]
Application notes•IP54 for indoor use only•The lamp must be installed by professional
electrician•Ensure the power supply is switched off before
fitting this product•Do not touch the lamp when in use•Keep away from hot steam and corrosive gas
Application AreasIt is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc.
Certificate
Introduction
A B
DL98 model is an integrated downlight provides the perfect combination of efficiency, light comfort and design, without compromising on lighting performance (color rendering and color uniformity). It offers a wide choice of options for creating the desired ambience.
Features 1. Integrated SMD LED down lights with Faceted / Specula Reflector. 2. No external driver required which facilitates easy installation. 3. A perfect alternative to traditional ceiling mounted luminaries. 4. Looping from luminaries to luminaries with mains through-wiring. 5. IP54 protection at room side, suitable for bathrooms, kitchens. 6. Triac Dimmable version available. 7. Good heat dissipating to ensure long life. 8. Internal Driver
www.upshine.com [email protected]
Fixture CompatibilityRated
WattageElectrical
ClassificationIngress
Protection Operating
TempOperatingHumidity
Storage Temp
18W Ⅱ IP54 -20oC~45oC 0~90% -20oC~65oC
Product Information2
Ø17
2Ø
146
71.395
Ø131
Technical Specifications
Model Voltage Power PowerFactor
Beamangle Dimmable Lumen
(±5%) CCT UGR Lifespan CRI Dimension
UP-DL98A-6-18WUP-DL98B-6-18W
AC100-277V 18W ≥0.9 90° No
1580 3000K
— 50,000h ≥80Ø172*95mm
cutout 150-165mm1890 4000K1840 5000K1850 5700K
UP-DL98A-6-18W-DUP-DL98B-6-18W-D
AC200-240V 18W ≥0.9 90° Yes
1530 3000K
— 50,000h ≥80Ø172*95mm
cutout 150-165mm1800 4000K
1730 5000K
1760 5700K
UP-DL98B-6-18W AC100-277V 18W ≥0.9 60° No
1690 3000K
≤19 50,000h ≥80Ø172*95mm
cutout 150-165mm1890 4000K
1840 5000K
1800 5700K
UP-DL98B-6-18W-D AC200-240V 18W ≥0.9 60° Yes
1660 3000K
≤19 50,000h ≥80Ø172*95mm
cutout 150-165mm1870 4000K
1800 5000K
1760 5700K
Driver data SheetDriver data Dim Non dim
Input rated Voltage AC230V AC100-277V
Frequency 50Hz 50/60Hz
Input Voltage AC200-240V AC90-305V
Efficiency ≥85% ≥86%
Total load Wattage 18W±1W 18W±1W
Power Factor ≥0.9 ≥0.9
Rated input current ≤0.1A ≤0.2A
Full load output Voltage DC65-75V DC65-75V
Rated output current 220mA 250mA
Output current range 220mA±5% 250mA±5%
Power tolerance ±5% ±5%
Current output tolerance ±5% ±5%
Dimming range 8%-100% —
Dimmer Triac dimmers —
Short circuit protection PASS PASS
Over voltage protection PASS PASS
Over temperature protection PASS PASS
THD ≤20% @ 230V ≤20% @ 230V
Withstand voltage — —
Photometric Diagram3000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 84.7 DEG
-/+180
-120
-90
-30
120
90
30
0
200
400
600
800
1000
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)10
9
8
7
6
5
4
3
2
1
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 84.03deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1296 lm
5000K 5700K
Polar intensity diagram Polar intensity diagramCartesian intensity diagram Cartesian intensity diagramBeam diagram Beam diagram
Height Eavg, Emax Angle: 84.02deg Diameter Height Eavg, Emax Angle: 84.45deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1507 lm Flux out: 1488 lm
UNIT: cdAVERAGE BEAM ANGLE(50%): 84.6 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
UNIT: cdAVERAGE BEAM ANGLE(50%): 84.8 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)15.0
13.5
12.0
10.5
9.0
7.5
6.0
4.5
3.0
1.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)15.0
13.5
12.0
10.5
9.0
7.5
6.0
4.5
3.0
1.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
4000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 84.6 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)15.0
13.5
12.0
10.5
9.0
7.5
6.0
4.5
3.0
1.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 84.12deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1507 lm
Spectral Distribution
3000K
380 500 600 700 800Wavelength(nm)
Max=5638 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0380 500 600 700 800
Wavelength(nm)
Max=8876 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
380 500 600 700 800 380 500 600 700 800Wavelength(nm) Wavelength(nm)
Max=8605 [1.0=20000] Max=8862 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
4000K
5000K 5700K
3.09 SDCM F4000K
x=0.3866 y=0.3860
5.63 SDCM F3000K
x=0.4481 y=0.4000
www.upshine.com [email protected]
2.37 SDCM F5000K
x=0.3490 y=0.3659
5.12 SDCM F5700K
x=0.3328 y=0.3527
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
065oC 75oC 85oC 95oC 105oC
Life
time
(hou
rs)
Capacitor Tc (oC)
Driver Lifetime
% L
umin
ous
Flux
FLUX
△ U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
Polar Diagram Comparison
AVERAGE BEAM ANGLE (50%): 84.8DEG
300
600
900
1200
1500
0O
-/+180O
150O-150O
120O-120O
90O-90O
60O-60O
30O-30O
UNIT: cd
C0/180, 84.7 deg
C30/210, 84.8 deg
C60/240, 84.9 deg
C90/270, 84.9 deg
0
LED Light Decay Rate
Temperature● The testing is operated at 25°C
● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
● The highest withstand temperature of IC, MOS could be 120°C
● The highest withstand temperature of LED junction temperature is 150°C
www.upshine.com [email protected]
80
70
60
50
40
30
20
10
0
18:3
7:46
19:0
7:44
19:3
7:44
20:0
7:44
20:3
7:44
21:0
7:44
21:3
7:44
22:0
7:44
23:0
7:44
23:3
7:44
0:07
:44
0:37
:44
1:07
:44
1:37
:44
2:07
:44
2:37
:44
3:07
:44
3:37
:44
4:07
:44
4:37
:44
5:07
:44
5:37
:44
6:07
:44
6:37
:44
7:07
:44
7:37
:44
8:07
:44
8:37
:44
9:07
:44
IC
Capacitor
MOS
PCB
LED
Fitting
Environmental temperature
Tem
pera
ture
(o C)
Time
Packaging Information
SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)
Carton 41*41*44 0.35 6 12
CTNS Q'TY(PCS) VOLUME(CBM)
20'' standardcontainer 372 4464 28
40'' standardcontainer 746 8952 56
www.upshine.com [email protected] Phone: +86 755 2919 7389Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China
InstallationInstall requirements
A-gap above the fitting 25mm
B-gap to the building material 25mm
C-gap to the thermal insulation 25mm
6. Make sure the downlight fixed tightly in ceiling, turn on the power.
1. Open a hole according to the cutout size of led downlight.
2. Open the line pressing cover, see Figure 1. ( M o d e l d e p e n d e n t ) : Choose the CCT by slide switch, see Figure 2.
Figure 1
3. Put the main AC wire through line pressing clip, feed the L.N to the fast connection terminal block respectively then compress the line pressing clip.
4. Close the line pressing cover tightly.
5. Hold back spring clips then push downlight into the hole.
Blue
BrownL =
N =
25mm 25mm25mm