+ All Categories
Home > Documents > Technical Application Guide -...

Technical Application Guide -...

Date post: 28-Jul-2018
Category:
Upload: phungmien
View: 222 times
Download: 0 times
Share this document with a friend
8
LED InstantFit T8 with EasySmart technology Technical Application Guide Philips is now introducing a new line of connected LED lighting products with EasySmart technology. Philips InstantFit LED T8 with EasySmart technology is compatible with verified 1 electronic ballasts. It is the easiest way to replace fluorescent lamps with connected LED lamps without rewiring the fixture. It is true plug and play. The lamp offers standard ZigBee based connectivity that easily interoperates with various control devices. Compared with a non-connected LED solution, EasySmart technology realizes more energy savings by enabling advanced control options.
Transcript
Page 1: Technical Application Guide - Philipsimages.philips.com/is/content/PhilipsConsumer/PDFDownloads/United... · Technical Application Guide ... plug and play. ... • Quick and easy

LED

InstantFit T8

with EasySmarttechnology

Technical Application Guide

Philips is now introducing a new line of connected LED lighting products with EasySmart technology. Philips InstantFit LED T8 with EasySmart technology is compatible with veri�ed 1 electronic ballasts. It is the easiest way to replace �uorescent lamps with connected LED lamps without rewiring the �xture. It is true plug and play. The lamp o�ers standard ZigBee based connectivity that easily interoperates with various control devices. Compared with a non-connected LED solution, EasySmart technology realizes more energy savings by enabling advanced control options.

Page 2: Technical Application Guide - Philipsimages.philips.com/is/content/PhilipsConsumer/PDFDownloads/United... · Technical Application Guide ... plug and play. ... • Quick and easy

Drivers• Compatible with verified electronic ballasts

• Designed and approved to UL, CSA and FCC

Dimension• Compliant with IEC and ANSI standards

LED• Latest innovation in LED chip design

2

User comfort • Uniform light output with advanced optical design.• Personal light setting to enhance user comfort and

productivity.• Typical CRI 82.

Reliability• Reliable operation between -20°C and +45°C

ambient temperature.• Tested to B50 L70 requirement. Lamps are rated

for 50,000 hours.• 200,000 switching cycles.

Safety• Over voltage and over temperature protection.• Complies with relevant UL and CSA safety

requirements. • Shatterproof polycarbonate (PC) material.

Environment • No Mercury.• Low Carbon Footprint.

Ballast Compatibility• Innovative driver design that enables a

“plug-and-play” LED solution.• Compatible with veri�ed 1 electronic ballast.• Quick and easy installation.

Connectivity• ZigBee based wireless interface.• Reliable and secure wireless communication,

nominal range 40 feet.• Up to 50 lamps in one network.• Easy commissioning and (re-)con�guration from

the �oor.

Control Functionality• Automatic on/o� and dimming based on

occupancy detection and daylight variation. • Personal dimming and scene setting with ZigBee

wireless switch.• High-end trimming to help save energy and

extend lamp life.

Energy Savings• Energy savings of 50% or more* when used with

advanced control such as dimming, occupancy sensing and daylight harvesting.

• DLC listed.

Product Features

Optics• Advanced optical system with

high efficiency reflector

Connectivity• Standard ZigBee based wireless interface

• Integrated infrared (IR) receiver

Thermal• Enhanced thermal

management features

IR receiver

* 50% energy savings compared to an F32T8 when dimmed

at least 30% for 10% of the time product is on.

Page 3: Technical Application Guide - Philipsimages.philips.com/is/content/PhilipsConsumer/PDFDownloads/United... · Technical Application Guide ... plug and play. ... • Quick and easy

Applications

Private O�ce

Restroom

3

Communication between lamps, switches and sensors is ZigBee based. To facilitate the installation,

Philips provides an IR programming tool as accessory. Your control device manufacturer will provide

a tool (ie: mobile app), to commission the sensor and switch.

* Philips InstantFit LED T8 with EasySmart technology uses ZigBee protocol to communicate with each other and control devices.

* EasySmart IR programming tool communicates with individual lamp via infrared.

System Overview

Philips InstantFit LED T8 with

EasySmart Technology ZigBee Wireless Switch

Philips EasySmart IR

Programming Tool Commission Tool, e.g. mobile app

Occupancy Sensor and

Daylight Sensor (optional)

Classroom

Open-plan O�ce Common Area

StairwellCorridor

Conference Room

Page 4: Technical Application Guide - Philipsimages.philips.com/is/content/PhilipsConsumer/PDFDownloads/United... · Technical Application Guide ... plug and play. ... • Quick and easy

Spectral Power Distribution

200 450 500400 550250 300 350 650 700 750600 800

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

0%

Inte

nsi

ty (

mW

/nm

) in

%

Wavelength (nm)

TLED 14W 3000K

200 450 500400 550250 300 350 650 700 750600 800

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

0%

Inte

nsi

ty (

mW

/nm

) in

%

Wavelength (nm)

TLED 14W 3500K

200 450 500400 550250 300 350 650 700 750600 800

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

0%

Inte

nsi

ty (

mW

/nm

) in

%

Wavelength (nm)

TLED 14W 4000K

200 450 500400 550250 300 350 650 700 750600 800

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

0%

Inte

nsi

ty (

mW

/nm

) in

%

Wavelength (nm)

TLED 14W 5000K

Photometric Diagrams

4

1 x TLED 14W 3000K 160D 9290012811 1 x 2000 lm

1 x TLED 14W 3500K 160D 9290012812 1 x 2000 lm

Page 5: Technical Application Guide - Philipsimages.philips.com/is/content/PhilipsConsumer/PDFDownloads/United... · Technical Application Guide ... plug and play. ... • Quick and easy

5

1 x TLED 14W 4000K 160D 9290012813 1 x 2100 lm

1 x TLED 14W 5000K 160D 9290012814 1 x 2100 lm

Lifetime and Lumen Maintenance

Philips InstantFit LED T8 with EasySmart

technology has a lifetime of 50,000 hours.

This is de�ned as the number of hours when

50% of a large group of identical lamps drop

below 70% of its initial lumen.

100%

95%

90%

85%

80%

75%

70%0 40000 5000020000 3000010000

Lu

me

n M

ain

ten

an

ce

Hours

Lifetime and Dimming

Dimming can help extend lifetime (ie: dimming

30% can extend lifetime by 9,000hrs)

40% 100%

80000

75000

70000

65000

60000

55000

50000

45000

4000020% 30%10% 80% 90%60% 70%50%

Lif

eti

me

(hrs

)

Light Output

Page 6: Technical Application Guide - Philipsimages.philips.com/is/content/PhilipsConsumer/PDFDownloads/United... · Technical Application Guide ... plug and play. ... • Quick and easy

6

Lifetime and Failure Rate

Lifetime vs. Failure rate @Ta 25°C Lifetime vs. Failure Rate vs. Tcase

Temperature

Dimensions

Operating temperature T operating min -20°C max +45°C

Storage temperature T storage min -40°C max +65°C

Maximum case temperature of tube at Tamb.=25°C T case +37°C

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

0

0 2000010000 60000500004000030000

Cu

mu

late

Fa

ilure

Ra

te

Lifetime (Hrs)

80%

70%

60%

50%

40%

30%

20%

10%

00 20000 30000 40000 50000 6000010000

TC=35

TC=45

TC=55

Tota

l Fa

ilure

Ra

te

Lifetime (Hrs)

25 35 45 55

60000

50000

40000

30000

20000

10000

0

F10L70

F50L70

Lif

eti

me

(h

rs)

TC (oC)TC (

oC)

100%

99%

98%

97%

96%

95%

94%

93%

92%

Lu

me

n (

%)

37 42 52 5747

TC Position

B

B

TC Position

White Side

Di�usive Side

SECTION B-B

Page 7: Technical Application Guide - Philipsimages.philips.com/is/content/PhilipsConsumer/PDFDownloads/United... · Technical Application Guide ... plug and play. ... • Quick and easy

Dimensions (mm)

Product A1

14T8/48 1198.1 1205.2 1212.3 25.6 27.8

D1 D2A2 A3A1

A2

A3

Technical Speci�cation

Product Description Bare Average Standby Initial Lifetime Cap Length Bulb CCT RF Product

Lamp System Power* Lumens Base Type Range number Watts* Watts*

( W ) ( W ) ( W ) ( lm ) ( hrs ) ( lm ) ( K ) ( ft )

14T8/48-3000 IF 10/1 EasySmart 14 17 ≤0.5 2000 50,000 G13 48 T8 3000 40 929001281104

14T8/48-3500 IF 10/1 EasySmart 14 17 ≤0.5 2000 50,000 G13 48 T8 3500 40 929001281204

14T8/48-4000 IF 10/1 EasySmart 14 17 ≤0.5 2100 50,000 G13 48 T8 4000 40 929001281304

14T8/48-5000 IF 10/1 EasySmart 14 17 ≤0.5 2100 50,000 G13 48 T8 5000 40 929001281404

Control Compatibility

Brand Model ID/Order Code Product Description

Accessory

Ordering Code Product Number Product Description

473504 929001390604 EasySmart IR Programming Tool 10/1

* Test based on reference instant-start ballast

D2 D1

Please visit www.philips.com/EasySmart for latest information on ballast compatibility.

Philips InstantFit LED T8 with EasySmart technology now work with:

Product must be used with compatible control devices. Please visit www.philips.com/EasySmart for latest

information on control compatibility.

Intellect Decora Lumina RF 1-Button multi-function BLE keypad with room

controller and LED feedback functionality, 120-277VAC, 50/60Hz, White

Intellect Decora Lumina RF 2-Button multi-function BLE keypad with room

controller and LED feedback functionality, 120-277VAC, 50/60Hz, White

Intellect Decora Lumina RF 4-Button multi-function BLE keypad with room

controller and LED feedback functionality, 120-277VAC, 50/60Hz, White

Intellect Decora Lumina RF 8-Button multi-function BLE keypad with room

controller and LED feedback functionality, 120-277VAC, 50/60Hz, White

Lumina RF PIR Occupancy Sensor, 450 sq ft

Lumina RF PIR Occupancy Sensor, 1,500 sq ft

Lumina RF Wireless Photocell

Neuron App

Leviton DLDNK-01W

Leviton DLDNK-02W

Leviton DLDNK-04W

Leviton DLDNK-08W

Leviton ZSC04-IxW

Leviton ZSC15-IxW

Leviton LURPC-00W

Leviton FREE

7

Page 8: Technical Application Guide - Philipsimages.philips.com/is/content/PhilipsConsumer/PDFDownloads/United... · Technical Application Guide ... plug and play. ... • Quick and easy

© 2017 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in speci�cations and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.

EasySmart TAG 03/2017 www.philips.com/lighting

Philips Lighting North America Corporation200 Franklin Square Drive, Somerset, NJ 08873Tel. 855-486-2216

Philips Lighting Canada Ltd.281 Hillmount Rd, Markham, ON, Canada L6C 2S3Tel. 800-668-9008

Philips InstantFit LED T8 with EasySmart technology strictly follows applicable legislation and standard.

The product complies with UL, CSA, NSF and RoHS.

Product is DLC quali�ed.

Philips is a member of ZigBee Alliance. Product is ZigBee certi�ed.

Approbation & Certi�cates

Application Notes

• Product is dimmable by wireless control

• Suitable for damp locations

• Reliable operation between -20°C to + 45°C ambient temperature

• Suitable to replace T8 fluorescent lamps that operate on instant-start ballasts

Please refer to www.philips.com/EasySmart for latest ballast compatibility list

• Require use of shunted lamp holders

• Not intended for use in emergency luminaires

• Not compatible with luminaires that use a remote starter

• Modifications to the product void the limited warranty.

For warranty information, please see www.philips.com/warranties

• You are required to read and understand the Quick Installation Guide and all warnings,

cautions and other materials related to installation published at:

www.philips.com/EasySmart before commencing installation work.

Footnotes

1 Veri�ed as compatible by Philips. Visit www.philips.com/EasySmart for latest ballast compatibility guide.


Recommended