Auktionsgade 30, 6700 Esbjerg, Denmark / [email protected] / www.realsap.com / +45 26 11 44 66 / CVR: 30721861
Auktionsgade 30, 6700 Esbjerg, Denmark / [email protected] / www.realsap.com / +45 26 11 44 66 / CVR: 30721861
Description
The product is a tough, durable, self-adhesive anti-slip material for application in a wide range of areas.
The material is constructed from a self-adhesive plastic base film.
The adhesive is pressure sensitive and is protected by a siliconised treated release paper. The upper surface consists of abrasivealuminium oxide particles held in place by a polymer resin. Prior to setting, the granules are charged by static electricity to help point upwards, thus increasing grip levels.
Where to normally apply
Designed to provide grip in varied applications even if, once applied correctly, oil, water or othercontaminants are present. Prefect for pedestrian traffic or lightvehicular traffic.
Advantages of using Real Safety’s anti-slip tapes:
Sizes
Real Safety produces all sizes and shapes of tapes. The maximum width is 1168 mm and the max. length is 100 m.
Packaging
Boxed in a variety of methods dependent on size or customer requirements. The case is marked with a label showing size,quantity, batch number and Real Safety’s internal bar code. Other information is added as required.
Application instructions
Please refer to the detailedapplication instructions.
Product durability
When applied, tipically 3 years.
Disposal
This product can be incinerated or disposed of throughconventional methods. The waste disposal code is 20.01.04.
• Tough, durable.• High levels of Coefficient of Friction - this is how grip is measured.• Ease of application.• Withstands most chemicals that are present in commercial environments.• Will adhere to most surfaces if the Real Safety procedures are followed.
Size
Colour
25/50/150 mm x 18.3 meterBrown, Black, Yellow, Black&Yellow, Black&White (Luminescent)
REAL Anti-Slip tapesTechnical Data Sheet 1/2
General information
REAL Anti-Slip tape
Auktionsgade 30, 6700 Esbjerg, Denmark / [email protected] / www.realsap.com / +45 26 11 44 66 / CVR: 30721861
Auktionsgade 30, 6700 Esbjerg, Denmark / [email protected] / www.realsap.com / +45 26 11 44 66 / CVR: 30721861
Anti-Slip is our only business!
The independent test laboratory at Adhesive Technical Services Ltd performed the temperature test,England. (test results available)
The above test was conducted in accordance with Pendulum. The test was conducted at a recognised independent friction testing laboratory, and copy certificates are available on request. Pendulum is a
dynamic test. For static tests, we also have results ASTM C 1028-96.
All the above data is for reference only.
Back carrier
Type of adhesive
Mineral type
Adhesion to steel
(g/25.4 mm2)
Tensile strength
(Kg/25.4 mm2)
Tear resistance (g)
Elongation at break
Temperature range
Maximum size of
production roll
Resistance to water
(months)
Resistance to chemicals
(months)
Resistance to motor oil
Life (months)
0.1 mm PVC
Solvent Acrylic
Aluminium Oxide
1500 ^
6.0 ^
5600 ± 200
25% ^
-30°C to +70°C
1168 mm x 100 m
10
8
Excellent
12 to 24
Caliper method
N/A
N/A
PSTC-4
PSTC-31
PSTC-39
PSTC-31
See notes below.
N/A
PSTC-35
PSTC-35
PSTC-35
PSTC-9
REAL Anti-Slip Tape
Standard
Dry surface test result
102 TRL
Wet surface test result
71 TRL
REAL Anti-Slip tapesTechnical Data Sheet 2/2
Subject Result Test method
Coefficient of friction data