+ All Categories
Home > Documents > Technical Data Sheet - Eastern Win Enterprises DBS 9802 Foam… · Product Description ... Thermal...

Technical Data Sheet - Eastern Win Enterprises DBS 9802 Foam… · Product Description ... Thermal...

Date post: 08-May-2018
Category:
Upload: nguyenthuan
View: 267 times
Download: 7 times
Share this document with a friend
2
Zwaluw® DBS 9802-PUR & NBS Fire retardent polyurethane foam (handheld & gun foam) Technical Data Sheet Den Braven Denariusstraat 11, 4903 RC Oosterhout T +31 (0)162 491 000 | E [email protected] Product Description Zwaluw DBS 9802-PUR & NBS one component fire retardant isolation and construction foam developed to make a fire retardant seal between stony construction parts up till a joint depth and width of 40 mm. Zwaluw DBS 9802-PUR & NBS is available as handheld and gun foam. Benefits High quality professional. PU Foam Fire retarding quality. Tested according to EN 1366-4 tested. Applications Zwaluw DBS 9802-PUR & NBS can be used in joints between separation walls, ceiling and floors. Perimeter joints around window and door frames. In general the foam has an excellent adhesion on concrete, brick, stone, plaster, wood, metal and many plastics like polystyrene foam, rigid PU foam and uPVC. Directions of Use For liniear joint up till 40 mm width. For a complete overview see our website or contact Den Braven. Additional information Application Temperature +10°C till +35°C Base Polyurethane Curing Time FEICA TM1005 2-24 hours Cutting Time 40 minutes Density 15-20 kg/m3 Fire Behaviour B1 Tack free time FEICA TM1014 8-12 minutes Temperature Resistance -40°C till +90°C Thermal conductivity 35 mWm.K Yield FEICA TM1003 750 ml = 45 litre Surface Preparations and Finishing Surfaces must be sound, clean, free of oil and grease. Surfaces moisten slightly (spray) using a spray bottle. In cold temperatures, the foam at least one hour before use in warm to room temperature. Gun Foam: Screws the can on the gun with NBS thread, preferably Zwaluw NBS M Gold. Adapter Foam: Remove the cap and screw the spray nozzle onto the adapter on top of the can. Shake the can vigorously before use (at least 20 times). Protect eyes and wear gloves and working clothes. Tapestry, floor-covering and furniture to be covered with paper or plastic foil. Fresh foam can be removed directly with Zwaluw Universal PU-Cleaner. After curing the surplus of the foam can be removed with a knife or spatula and the foam surface can be finished. Cleaning Fresh foam can be removed directly with Zwaluw Universal PU-Cleaner. After curing the surplus of the foam can be removed with a knife or spatula and the foam surface can be finished. Colour(s) Pink Packaging Can 750 ml
Transcript

Zwaluw® DBS 9802-PUR & NBSFire retardent polyurethane foam (handheld & gun foam)

Technical Data Sheet

Den BravenDenariusstraat 11, 4903 RC OosterhoutT +31 (0)162 491 000 | E [email protected]

Product DescriptionZwaluw DBS 9802-PUR & NBS one component fire retardant isolationand construction foam developed to make a fire retardant seal betweenstony construction parts up till a joint depth and width of 40 mm. ZwaluwDBS 9802-PUR & NBS is available as handheld and gun foam.

Benefits• High quality professional.

• PU Foam

• Fire retarding quality.

• Tested according to EN 1366-4 tested.

ApplicationsZwaluw DBS 9802-PUR & NBS can be used in joints betweenseparation walls, ceiling and floors. Perimeter joints around window anddoor frames. In general the foam has an excellent adhesion onconcrete, brick, stone, plaster, wood, metal and many plastics likepolystyrene foam, rigid PU foam and uPVC.

Directions of UseFor liniear joint up till 40 mm width. For a complete overview see ourwebsite or contact Den Braven.

Additional information

Application Temperature +10°C till +35°C

Base Polyurethane

Curing Time FEICA TM1005 2-24 hours

Cutting Time 40 minutes

Density 15-20 kg/m3

Fire Behaviour B1

Tack free time FEICA TM1014 8-12 minutes

Temperature Resistance -40°C till +90°C

Thermal conductivity 35 mWm.K

Yield FEICA TM1003 750 ml = 45 litre

Surface Preparations and FinishingSurfaces must be sound, clean, free of oil and grease. Surfacesmoisten slightly (spray) using a spray bottle. In cold temperatures, thefoam at least one hour before use in warm to room temperature.

Gun Foam: Screws the can on the gun with NBS thread, preferablyZwaluw NBS M Gold.Adapter Foam: Remove the cap and screw the spray nozzle onto theadapter on top of the can.

Shake the can vigorously before use (at least 20 times). Protect eyesand wear gloves and working clothes. Tapestry, floor-covering andfurniture to be covered with paper or plastic foil. Fresh foam can beremoved directly with Zwaluw Universal PU-Cleaner. After curing thesurplus of the foam can be removed with a knife or spatula and thefoam surface can be finished.

CleaningFresh foam can be removed directly with Zwaluw UniversalPU-Cleaner. After curing the surplus of the foam can be removed with aknife or spatula and the foam surface can be finished.

Colour(s)• Pink

Packaging• Can 750 ml

Technical Data Sheet

Zwaluw® DBS 9802-PUR & NBSFire retardent polyurethane foam (handheld & gun foam)

Den BravenDenariusstraat 11, 4903 RC OosterhoutT +31 (0)162 491 000 | E [email protected]

All information in this document and in all our other publications (including electronic ones) is based on our current knowledge and experience and is the exclusive (intellectual) property of Den Braven. No part of this document may be copied, shown to third parties,reproduced, communicated to the public or used in any other way without Den Braven's written consent. The technical information in this document serves as an indication and is non-exhaustive. Den Braven is not liable for any damage, either direct or indirect, due to(editorial) errors, incompleteness and/or incorrectness of this document. This includes, but is not limited to, incompleteness and/or incorrectness due to technological changes or any research conducted between the date of publication of this document and the date onwhich the product is acquired. Den Braven reserves the right to amend the wording of this document. Den Braven cannot be held liable for any damage, either direct or indirect, due to the use of the product depicted in this document. The user must read and understandthe information in this document and other documents relating to the products prior to the use the product. The user is responsible for performing all the requisite tests to make sure that the product is suitable for its intended use. We have no influence in what way theproduct is applied and/or any circumstances relating to events occurring during storage or transport and therefore we do not accept any liability for damage. All deliveries are made exclusively in accordance with our general terms of conditions which have been filed atthe Dutch Chamber of Commerce.

Shelf LifeIn ongeopende originele verpakking, tussen +5°C en +25°C, tot 12maanden houdbaar na productiedatum mits bewaard op een drogeplaats.

Health & SafetyProduct Health and Safety Data Sheet must be read and understoodbefore use. These are available on request and via the Den Bravenwebsites.

Warranty & GuaranteeDen Braven warrants that its product complies, within its shelf life, to itsspecification.


Recommended