1
GLUETEC Industrieklebstoffe GmbH & Co. KG Am Biotop 8a · D-97259 Greußenheim Tel.: +49 (0) 93 69 / 98 36 0 · Fax: +49 (0) 93 69 / 98 36 10 · www.gluetec.de · [email protected] Weldyx plas+c cleaner removes dirt and even the strongest traces of oils, greases, resins, glue, clutch and brake dust quickly, reliably and pore‐deep. Because of its extremely gentle cleaning it is specially designed for plas+c surfaces. Trading units Item no.: 500ml spray can WXCLP.D500 1000ml can WXCLP.D1000 page 1/1 Characteristics • Especially for plastic surfaces • Excellently suited for sensitive surfaces • Odourless Application Areas • Complete removal of dirt on plastic surfaces • Perfect cleaner for repair, maintenance and assembly • Removes quickly and efficiently even the most persistent staining as well as residues of oil, grease, adhesive and abrasion from brakes and couplings. Instructions Aerosol can: Apply the product directly from the aerosol can onto the designated parts and let the liquid run off. Wipe the parts with a clean cloth if necessary. Can: Apply the product with a cloth onto the designated parts and wipe the parts afterwards. In case of persistent staining, repeat the procedure, if necessary. Please test the compatibility of sensitive materials on spots that are not visible before applying the product. The information contained in this data sheet, especially the suggestions for processing and application of products, is based on our experience and newest expertise. Due to the facts that materials can be very diverse and that we have no inuence on the working conditions, we recommend to perform sufficient tests to validate the compatibility of the products. Our company shall neither be held liable for this information nor for a verbal or written consultation. Additionally, please consider the information of our safety data sheets. Technical Data Sheet TDS revised on 07/04/2016
