TECHNICAL DATA SHEET SPARTAMAX GUN OIL SGO-758 BioCLP … · 2016-09-06 · SGO-758 TDS SpartaMax...

TECHNICAL DATA SHEET SPARTAMAX GUN OIL

SGO-758 BioCLP (Clean-Lube-Protect) P/N 866-634758 / NATO S-758

SGO-758 TDS SpartaMax Products, Rockford, IL USA (815) 637-1574 www.sgomp.com Pg 1 of 4

SGO-758 SpartaMax Gun Oil CLP (Clean-Lube-Protect) Product Information:

SGO-758 Proprietary Cleaner-Lube-Protection product. Formulated with advanced Bio Base aerospace / synthetic chemistry and metal surface treatment. Universal for gun barrel bore & mechanical parts with aerospace lubricant provides; high temperature durability, cold /sub-zero operation temperatures, reduced friction & long lasting features. Stay-ability upon surfaces with cleaner weapon performance (greatly reducing carbon, nitrite, residue particles & micro-dirt attraction).

Commercial Applications & Use:

SGO-758 (BioCLP) is Universal for multiple related Pistol, Gun & Rifle Applications (small medium & large) including small Hand gun (pistol), Shot Guns, Rifles (regular, semi and fully automatic).

SGO-758 (BioCLP) application & use during regular Cleaning & Lube of gun (barrel bore & parts).

Bio Cleanse & Lube Protection of Gun Barrel Bore (increases durability & service life cycles).

Bio Cleanse & Lube Protection of Internal & External Mechanical Parts, Bolt, Slide & Firing Pin Areas.

SGO Special Formulation embeds into barrel bore to reduce Carbon & Nitrite formation. SGO-758 Cleaner Fire Chamber Combustion Efficiency blows more Carbon out the muzzle - etc.

PROFESSIONAL USE – MILITARY & UNIVERSAL NEEDS to NATO S-758

SGO-758 Formulation to U.S. Army Specification MIL-63460E (4) Nov. 2014 / 2016 BioCLP.

Features & Benefits:

CARBON & CONTAMINATION MANAGEMENT. Designed to be left wet upon internal working and slide component surfaces. When Powder and contaminates come in contact with SGO-758 CLP, special bio chemistry dissipates & holds carbon in manageable suspension - later wipes away.

Compatible w/all metals, composites, surfaces & non-hazardous (flash point above 450°F).

Internal & external mechanical lubricant for extreme duty, hi-performance & long lasting requirements Aerospace synthetic (thin, light, durable for high & cold temp. stable) lubricant w/ surface stay-ability.

Performance Repeatability capabilities provide improved Barrel Bore Efficiency

Barrel Bore Efficiency provide increased target penetration, distance, accuracy & repeatability.

Gun barrel bore operates cooler w/ longer service life cycles (historic – performance time doubles).

Provides longer performance durations & maintenance cycles with reduced surface degradation.

Metal Surface - Static Condition is greatly reduced which slows micro particle / surface embedding.

Resists static carbon & micro dirt particle attraction into or upon barrel & mechanical components.

Gun Powder - Nitrite particles which normally imbeds into barrel and mechanical component surfaces are greatly reduced. During maintenance easily wipes away with bio-solvent cleansing action.

Anti- Oxidation (rust) protection upon metal surfaces in all theaters as required.

Special polarization / attraction absorbs the aerospace technology directly into the micron metal pours of component surfaces (barrel bore, firing pin, bolt, etc. no matter the surface).

USDA Bio-base, Bio-degradable and Bio-safe for personnel’s physical application and use.

Due to continual product research & development, the information contained herein is subject to change without notification. Typical Properties may vary slightly. MSDS's are available upon request.

IV.b-1




SpartaMax SGO-758 BioCLP is a completed hi-performance proprietary formulation Created with current - modern 21st Century materials; each main chemical material area (base oil, additives & rust protection etc.) was selected for need to fulfill either one or all of the following basic requirements: a) Environmental safe, biodegradable, user (worker safe) non-hazardous, non-dangerous good.

b) NOT listed as non-approved material under EPA, CDC, APHC MEG (Military Exposure Guidelines) etc.

c) Renewable resources: Plant, Forestry, Bio Base; Fermented by either natural or Synthetic MFG process.

d) Bio Base Content would be up to 10% ( 2X above requirement ) for current - MIL-PRF-63460E (4)

e) 90% chemical materials would be considered as biodegradable for the entire formulation co761lete.

f) 10% chemical materials (non-biodegradable) would NOT be listed or considered as hazardous etc.

g) ALL materials no matter the origin, accepted within established exposure guidelines from EPA, CDC etc.

h) ALL materials would be commercially & readily available without restriction or reservation for MFG.

i) BioCLP Cleaning / Maintenance Performance; provide a positive / improved experience for worker / user.

j) During Weapon Operation; contamination control, barrel bore efficiency, performance repeatability.

k) BioCLP Qualified Rust Protection without use of Hazardous materials including: Barium & Heavy Metals.

l) BioCLP complete all qualification performance requirements of NATO S-758

TECHNOLOGY DESCRIPTION for BIOBASE - BIODEGRADABLE - ENVIRONMENTAL ACCEPTABLE

SGO-758 BioCLP product is designed to be biodegradable, environmentally acceptable / safe & non-toxic.

SGO-758 BioCLP DESIGNED TO REDUCE health hazards from skin contact & respiratory exposure.

U.S. Department of Agriculture (USDA) defines a Biobased product as a commercial or industrial product, an intermediate ingredient, or feed stock that is composed, in whole or in significant part, of biological products including renewable domestic agricultural materials and forestry materials.

Biodegradability, technical grade structure, material cleanliness along with short and long term reactivity to land, water and air is noted as a key factor(s) by the U.S. Environmental Protection Agency (EPA) and other related agencies at the local, state, region, national and international levels (collectively) determine if chemical material is to be considered as “environmentally acceptable”

Biobased, Biodegradable & Environmentally Acceptable / Safe materials are made from conventional and synthetic plant-based feed stocks, either used directly or from fermented processes which in many applications offer higher lubricity, enhanced (oxygenated) solvent characteristics, and substantially higher flash points than petroleum-based products.

SGO BioCLP product(s) use a combination of premium chemical materials that are certified as NSF / USDA H-1 Food Grade (incidental food contact) Technical Grade Clean Bio Based and Hi-Biodegradability

IV.b-2




BENEFITS: for BIOBASE - BIODEGRADABLE - ENVIRONMENTAL ACCEPTABLE BioLP PRODUCTS. SGO-758 BioLP benefits to the DoD & NATO operations will be realized through REDUCED:

• Human Health Impact, • Environmental, Safety Concerns & Waste Generation, • Storage, Transportation & Handling Requirements.

SGO-758 BioCLP proprietary formulation design is anticipated to improve mission readiness through improved carbon / contamination management, barrel bore efficiency, cooler operation temperatures and overall performance repeatability during weapon use. As compared to cleaning, lubricating & operation performance over previously used petroleum-based product that was not SGO-758 BioCLP design.

SGO-758 BioCLP use as instructed; provides efficiency within the cleaning event, further decreasing the use of previously used petroleum distillates, large volumes of solvents, and exposure to hazardous materials including but not limited to Lead, Barium and other hazardous chemical materials as listed by the EPA, CDC & MEG ( US Army Health Command – Military Exposure Guidelines ).

SGO-758 BioCLP has the potential to use less or lower amounts of product; which reduces the use and overall exposure to previous / non safe chemical products,

SGO-758 BioCLP should be used under current future Military Manual instruction(s) which normally states – when the weapon has completed its use for the day (no matter weapon size or platform); Weapon should be fully cleaned and prepared for the next day or next time of use.

SGO-758 BioCLP would provide efficiency (especially contamination management during weapon operations) to improve the cleaning event buy REDUCING: • Amount of time required to conduct cleaning & maintenance procedures • Amount of cleaning products (BioLP used) for disposal • Use of non/safe hazardous chemical materials & solvents • Waste management & disposal fees.

SGO-758 BioCLP DESIGN WITH PURPOSE to PROVIDE:

• Improved environmental and personal safety as compared to previous hazardous chemicals . • Sustainability & performance for the valued warfighter • Decrease in weapons failures from improved contamination control during weapon & universal use • Cooler barrel & component temps through cleaner operations w/ improved heat transfer capability • Improved Cleaning Event with advanced SGO-758 BioCLP chemistry increases the warfighter’s

capability along with weapon functionality & performance repeatability. • Potentially increasing the sustainment of the warfighter in the battlefield. • Longer maintained rate of fire with less weapon malfunctions during training & field operations. • SGO-758 BioCLP formulation design advantage allows more time for training and operations. • Lifecycle cost benefit from lower SGO-758 BioCLP product cost as compared to previous products. • Reduced labor & disposal of used cleaning materials. • Assist in meeting sustainability goals & help domestically produced agriculture products.

IV.b-3




SGO –BioCLP is formulated to perform to the following requirements:

PERFORMANCE SPECIFICATION to- North Atlantic Treaty Organization (NATO) Code Number S-758.

LUBRICANT AND PRESERVATIVE FOR WEAPONS, WEAPONS SYSTEMS UNIVERSAL NEEDS

Intended use. SGO-758 (BioCLP) Product is for use in lubricating & short-term preservation of small & large caliber military weapons, operating in minimum temp range requirement of -51 to + 71 °C (-60 to +160 °F ). Highly penetrating, mobile liquid and is intended for field application to satisfy the complete need of lubricating, and short term preservation of military weapons and universal needs / applications

1. Product Requirements.

a) SGO-758 (BioCLP) CONTAINS NO Graphite, Moly, Teflon, BARIUM, powdered or heavy metals.

b) BioCLP contains No - Ozone depleting substances (ODSs) or Volatile Organic Chemistry VOC. .

c) Toxicity and hazardous materials. SGO-758 (BioCLP) has no adverse effect on the health of

personnel when used for its intended purpose. DOD & GSA “GREEN” Compliant with Chemistry Materials

including 80% Biodegradable & 10% Biobase Materials from plant forestry renewable resources.

2.Environment Performance Requirements.

a) Humidity resistance.700 hours exposure in a humidity cabinet shall have ittle to no corrosion upon metal

surface.

b) Salt-spray resistance. when applied, shall protect the metal surfaces after 72 hours exposure to a spray

of 5 % salt solution.

Should any further questions, information or clarifications be required email send inquire to:

[email protected] IV.b-4

Properties Values

Flash Point, min 120 °C (249 °F) +

Pour Point, max -59 °C (-74 °F)

Viscosity, Kinematic (w/ solvent) @ +40 °C (104 °F), min 10.0 cSt

Viscosity, Kinematic (w/ solvent evaporated) @ -40 °C (-40 °F), max 5000 cSt

Wear Preventive Characteristics, avg., Scar Diameter, maz 0.8 mm

Load Carrying Capacity, Jaw Load, min 500 lbs

mailto:[email protected]

NATO S-758 NATO S-761 SGO- BioCLP 3C’s Performance Technical Overview www.sgomp.com Pg 1 of 6

SGO-BioCLP (BioSafe- Clean Lube Protect) for Mil 63460E (4) / NATO S-758 & NATO S-761

BioSafe Formulation w/ Carbon-Contamination & Heat Dissipation Management.

BioCLP Weapon Product: Concern (problem) Cause (creates problem) Conclusion (answer)

PART ONE – TECHNICAL REVIEW:

This is a general overview of SGO-BioCLP performance which can work with multiple weapon platforms.to

address the specific issue(s) of extreme duty requirements to provide weapon performance repeatability w/

multiple platforms (pistol, rifle etc. including standard, semi & fully automatic operations) through:

a) Weapon Cleanliness (Aerospace Engineering level) w/ a fresh and advanced look at weapon preparation.

b) Carbon, contamination and powder management – increasing rounds fired per cleaning cycle (as required)

c) Barrel Bore, Slide, working components areas with improved heat dissipation (heat transfer) which results

in cooler metal surfaces and weapon operation temperatures.

d) Increased component durability and longer weapon life cycles with improved Barrel Bore Efficiency & FPS.

e) Bio-base with non-hazardous oxygenated co-solvents with easy application; that is worker and user safe.

This is a weapon maintenance and performance dream list;

With decision and application engineering this is accomplished with: SGO- (BioCLP) and SGO-RBC

Through a combination of chemistry application engineering to the hi-performance weapon requirement; these

goals are achieved; by using a specific selection of advanced - 21st century chemical materials available for the

Bio Based Clean Lube Protection and Rifle Bore Cleaner business model.

We shall now address the 3 C’s which apply to this issue resolution:

Concern ( what is the problem)

Cause ( what situation or issue of events creates the problem)

Correction (Answer).

CONCERN:

Standard issue(s) or common problem(s) in the modern era ( 21st Century ) with most small arms and rifle

weapon system(s) normally is not the engineer design of the component; but chemistry used during both the

maintenance procedures and function operation(s).

Most common weapon maintenance products are designed to take care of cleaning and lubrication duties after

weapon use; normally do not focus carbon contamination prevention or management (best as possible) during

weapon functions and duties during daily and extreme duty use for protection and security requirements.

V-1


Concern / Issues to be solved:

Carbon & Contamination Management;

Heat / Thermal Dissipation;

Friction Reduction;

Easy Application & Cleaning Capability w/ non-hazardous & environmental friendly use.

Performance Repeatability with increased component durability.

Answer is simple: “decision for a qualified chemical engineered product to the application need”

CAUSE (creating the problem or what you do not need to happen):

a) Use of a common weapon CLP product that does not effectively deep cleaning of carbon, contamination

from the pores of the metal alloys (Steel, Aluminum, Brass, Copper, Lead etc.) or plastic surface(s).

b) Use of a common weapon CLP product that does not PROVIDE carbon, contamination MANAGEMENT from

the pores of the metal alloys (Steel, Aluminum, Brass, Copper, Lead etc.) or plastic surface(s).

c) Use of a common CLP product that either creates or allows an insulation coating (either by carbon

contamination from use or by the CLP product use / coating itself such as Teflon, Silicon or Natural mint

coating etc.; (that will hold heat and not allow heat dissipation during weapon operation & use);

WHY? – Insulation or coating upon weapon surfaces & components does not provide cooler operations:

1) Some common CLP Products create a heat soak (insulation) not allowing heat rejection or dissipation.

2) Coating of carbon & contamination direct upon metal surfaces (barrel bore, slide areas & moving components)

NOTE: Science of metallurgy (metal surface performance) cannot be forsaken:

a) LACK OF heat reaction or heat dissipation management will cause increased: friction, slowing of

performance; increased metal surface embrittlement shall reduce component durability & life cycle operation.

b) SURFACE HEAT REJECTION & HEAT DISSIPATION MANAGEMENT PROVIDES: performance

repeatability; DECREASES friction & surface embrittlement; INCREASING durability & life cycle duty.

CORRECTION (answer):

USE a specific BioCLP product with a formulation decision for the application requirement which provides:

a) Aerospace Engineered Cleanliness from the start with a fresh; advanced look at weapon preparation

b) Carbon, contamination and powder management – (as required increasing rounds per cleaning cycle)

c) Barrel bore, slide, working components areas with improved heat dissipation; resulting in cooler metal

surfaces and overall weapon operation temperature.

d) Increased component durability and longer life cycles with improved barrel bore efficiency & FPS.

e) Bio-base w/ non-hazardous oxygenated co-solvents w/ easy application; environmental and worker safe.

V-2


GOALS ACCOMPLISHED WITH THE USE OF SPARTAMAX GUN OIL BioCLP & BioRBC PRODUCTS;

Start with a modern design BioBased oxygenated solvent (Natural) material.

1) Advanced BioBased Industrial product formulation with the highest Kb Kauri-butanol

solvent power rating: Base Material must be an is an OXYGENATED CARBON KILLER.

KEY #1 overall carbon, contamination & powder management – not only for initial cleansing &

maintenance; yet most effective during extreme duty operations.

MOST IMPORTANT: worker safe - during product use (proper industrial hygiene practice while cleaning).

KEY #2 during weapon operations – (contrary to standard practice) – other than certain pistol fire pin areas;

you are allowed and encouraged to keep or provide a coating of the SGO-MP product upon the slide and

component areas. WHY? Reason is that we cannot simply make the carbon & powder “ disappear”

but we can manage powder contamination – when the carbon / powder comes in contact with SGO-BioCLP –

the High Kb rated Bio Solvent naturally breaks up and dissipates the carbon & contaminate. Further allowing

SGO-BioCLP to act as a long life hi-performance product - Unlike before with standard CLP products – the

CLP would become overwhelmed by the carbon and heat; then break down the oil to sticky varnish mess.

2) KEY #3 hi-performance lubricant: aerospace – cleanliness engineered formulation: tough, light weight

product providing viscosity stabilization (will not break down), anti-wear, friction & heat reduction properties.

3) KEY #4 capability to greatly reduce heat & static during the weapon operation;

(movement between two dissimilar metals etc. with friction action causing electrical charge).

Static will promote the attachment of carbon – followed by copper then lead etc. you need to manage this.

SGO- BioCLP w/ proprietary formulation greatly reduces (almost eliminates) static – which reduces allotment

of remaining carbon; carbon either leaving (pulled) w/ vacuum of bullet (ball) or being pushed out by next

bullet (ball); increases barrel bore efficiency, feet per second and smaller target grouping.

QUALFIED HEAT DISSIPATION & REDUCTION with OVERALL COOLER WEAPON OPERATIONS:

Scientific fact: CARBON, GRAPHITE, MOLY, TEFLON & BARIUM IS AN INSULATOR, HOLD HEAT

(INCREASES HEAT SOAK) (less carbon = less heat). Manage carbon & contamination; you increase to

increase Heat Transfer efficiency.

Explained: When micron metal pores & fishers (cracks) are cold they are closed, when hot metal opens; if

the carbon & contaminates are not managed, the carbon (like a magnet + / -) is naturally polarized and drawn

into the metal pores (basic component of steel & moly is carbon).

When the metal becomes cold the metal pore closes and traps the carbon in the metal; further increasing

metal surface embrittlement – along with all the problems of holding heat etc.

With qualified heat dissipation performance during weapon operations and use; metal surfaces have

the improved ability to return itself back to a cooler and manageable state (in a shorter period of time).

V-3


GOAL: NOT ALLOW CARBON TO EMBED INTO THE METAL SURFACE (BARREL BORE, SLIDES

FIRE PIN OR MECHANICAL COMPONENTS) THROUGH CHEMICAL FORMULATION MANAGEMENT.

Goal is Not to allow the carbon etc. (stay in solvent/lubricant suspension or reduce static to move along)

during the operation of the weapon (while it is hot) not to allow the carbon etc. to get into the micron metal

pores and cracks to be held causing heat. When carbon & contaminates get into metal it is very tough to

scrub the carbon & contaminates out

Therefore; when you manage to reduce static along with the amounts of carbon & contaminates upon the

surfaces many of these problems are greatly reduces and eliminated.

SpartaMax Gun Oil products provide carbon & contamination management; (reasons stated) within the barrel

bore, slide, fire chamber operations including moving component parts; weapon platform shall operate

cleaner, efficient and cooler.

Further, we encourage the option to allow the surfaces of the slide areas and mechanical components to

remain slightly wet with a light film upon the surface (unless extreme dirt / dust conditions); reason for this;

when the carbon & contaminates come in contact with the oxygenated solvent & lubricant; the carbon is

dissipated & held in suspension; carbon & contaminates is managed to reduce the ability to dry upon surface.

One of the reasons this can take place; SGO BioCLP formulation naturally has a high solvent (Kb) Kauri-

butanol rating) & anti-carbon capability (up to 5Xs+ Kb solvent performance than common CLP products).

Common CLP or lubrication products during weapon operation use; when carbon etc. with heat and friction

etc. come in contact with common CLP; carbon and contaminates (without qualified solvent capability) would

overwhelmed common CLP and breakdown the CLP / lubricant product to its basic state of sulfur – forcing the

common CLP to change (plasticize) into a sticky varnish; along with the carbon and contaminates.

With SGO; chemical breakdown from carbon & contaminates is greatly reduced & almost eliminated.

SGO- (BioCLP) & SGO-RBC (Bio Rifle Bore Cleaner) products are Environmental Friendly; Non-Hazardous

and Non-Dangerous Good, regarding MSDS, State, Federal or International etc. SGO products are

considered “non-reportable”.

SGO- BioCLP FORMUATION PRODUCT GENERAL CLARIFICATION

SGO- BioCLP – Clean Lube Protection product is a multi-design use product (14-16cSt @40C) as

generally specified under Military specification performance (addressed later) within the formulation the

purpose is to have (3) three roles of function:

Common - Daily Cleaning and Maintenance procedures;

Lubrication duties to work during the function of the weapon;

Metal surface protection against humidity & salt corrosion etc. during use and storage conditions.

V-4


PART TWO – COMPARISON OVERVIEW:

OVERVIEW SGO-MP BioCLP vs. common Synthetic CLP products:

In the world of chemistry formulation and application engineering we need a general understanding:

a) If a product works to the specification and qualification performance to which is was designed (Military or

OEM Specification etc.) that is fine and the product works to the requested business model and requirement.

b) If any company (SpartaMax Products) reviews that certain specification ( example CLP military specification );

then through engineering decision with performance test and evaluation; creates a product which fulfills

additional operational needs beyond the original OEM or Military specification; then it fulfills a different model.

c) One product (A or B) is not better than the other – they are designed different to the need and specification.

Choice #1 is common CLP: need is for a weapon lubricant product with the need for Anti-Rust and salt

Corrosion prevention with acceptable Lubrication - Cleaning performance and small percentage of Bio Base

content, with a possible used of 10%+ chemistry as stated within the MSDS as hazardous to human touch in

order to conduct the salt corrosion prevention duties (Calcium Alkylnaphthalene Sulfonate CAS 57855-77-3)

or other related type of chemistries then QPL CLP MIL-PRF-63460(E) will work to that need.

Unless specified – most (if not all) - Calcium Alkylnaphthalene Sulfonate products designed for rust protection

include Barium ( up to 7%) – barium has a couple problems – a) Barium provides a coating within the barrel

and components which actually increases carbon attraction creating a multiplied mess – when product gets to

200F. b) ( when over the EPA daily exposure guidelines of 10 ppm) Barium in human health and safety

creates problems with the nervous system including but not limited to: Muscle disorders, dysfunction

with human nervous system as the Barium is a natural dialectic – increasing and disrupting the electrical flow

within the human body.

Choice #2 is advanced SGO- BioCLP: product which does not require a high level of salt corrosion capability

for theater of operations where sea salt is an issue (does have common humidity & storage protection):

The choice would be for a CLP product which has the focus not only for qualified cleaning and lubrication during

the maintenance event of the weapon; but worker & user safety with a hi percentage of bio-based content

chemistry; without containing common used hazardous materials;

BioCLP product that is designed for hi-performance during weapon functions and operations - equal to current MIL-PRF-63460(E) (including the ability addition to help control carbon and contamination management,

Improve FPS (feet per second); barrel bore efficiency and cooler component temperature as compared to other

products, for overall weapon performance repeatability. (FPS Historic Average Improvement = 3% to 5%)

Choice #2 BioCLP is the consideration for the use of a CLP product without hazardous chemical materials;

allowing improved use and worker personal safety with environmental friendliness and facility non reportability.

SGO- BioCLP is designed for Choice #2 as the Advanced CLP.

V-5


Human Health & Environment Safety:

2016 the Department of Defense through a positive effort along with US Army Safety – Industrial Hygiene

program with other agencies is pursuing the desire for the military to provide CLP products which are both equal

to the performance qualification requirement and higher Bio-Base content with worker safety and ease of use.

We encourage this effort especially for the elimination of any hazardous materials (such as Barium etc.) that

would cause harm to the human health of the user/ worker no matter the capacity.

SGO- (SpartaMax Gun Oil) products are designed with decision to perform beyond common CLP:

Spartamax Product chemical engineering & technical team took the positive direction of military performance

requirements of both standard requirement common CLP (Clean Lube and Protect) and RBC – (Rifle Bore

Cleaner) formulation into one single advanced valued product.

SGO-BioCLP Provides aerospace level cleaning with hi-performance lubrication properties, including carbon

and contamination management capability to provide improved barrel bore efficiency. SGO-BioCLP Advantage

increases the performance repeatability to allow more shots between cleaning events; with easy application.

SGO- Provides premium carbon, contaminate & rust cleaning capability with oxygenated solvent properties.

SGO- is ( 90%) Bio Based & Readily Biodegradable ; environmental safe, non-hazardous & non dangerous.

SGO- Effective bio-solvent is multi-surface safe including; steel, aluminum, alloys, hard plastics & coatings.

SGO- Provides accepted-standard humidity & storage protection; to all theater of operations (non-corrosive).

SGO- can be used with multiple weapon platform(s) that have hi-pressure gas impingement design as used

within semi-automatic & automatic operations w/ Rifles, Shot Guns & Pistols along with bolt & manual action.

SGO-BioCLP / NATO S-785 & NATO S-761 product is formulated for needs beyond common CLP duties;

Carbon & Contamination Management

Improved Heat Transfer for Cooler Components

Barrel Bore & Target Group Efficiency

Weapon & Component Performance Repeatability

Rust Protection & Management

Weapon lubricant products do not fall under ITAR (International Traffic in Arms Regulations).

Weapon lubricant products cannot be sold to any person or entity which not approved by: U.S. State Department.

SpartaMax Gun Oil Product(s) are Environmental & Worker / User Friendly; Non-Hazardous & NON-Dangerous

Good (shippable), “non-reportable” regarding EPA State, Federal (USA), Europe or International Regulations.

Information including: video & documentation demonstration of use w/ instruction & qualified approvals available.

Should there be further questions or additional information required please contact directly: [email protected]

V-6

Date post:	05-Aug-2020
Category:	Documents
Upload:	others
View:	10 times
Download:	0 times

TECHNICAL DATA SHEET SPARTAMAX GUN OIL SGO-758 BioCLP … · 2016-09-06 · SGO-758 TDS SpartaMax...

Documents