+ All Categories
Home > Documents > TECHNICAL DATA SHEET · USE To wax furniture, beams, doors, marble or stone. PREPARATION Sand the...

TECHNICAL DATA SHEET · USE To wax furniture, beams, doors, marble or stone. PREPARATION Sand the...

Date post: 25-Sep-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
1
1L 5L 0,5L Q uality wax T ECHNICAL DATA SHEET PRODUCT DESCRIPTION A traditional wax made with natural raw materials like African beeswax, candellilla wax, carnauba wax and pure turpentine oil. TECHNNICAL DATA APPEARANCE paste ODOUR turpentine DENSITY 0,8 SOLID CONTENT 30% USE To wax furniture, beams, doors, marble or stone. PREPARATION Sand the new wood with a 150 grit sandpaper and remove the sanding dust. You can use Aquacolor, reactive stain or Aquavintage Ciranova first to colour the wood. USER TIPS Apply a thin coat with a paintbrush or cloth in the direction of the grain. Leave to dry for 12 hours and buff with a furniture brush or cloth. DRYING TIMES 12 hours at room temperature. APPLYING QUANTITY AFTER TREATMENT Use several layers of Ciranova Quality Wax. For maintenance, use Ciranova® Liquid Wax. Do not use varnish over wax polish. PRODUCT INFORMATION Available colours : clear, yellow, brown, medium, antique, dark and mahogany. Storage : store in a well ventilated and cool place for up to 2 years. SPECIAL QUALITIES This product is made from natural raw materials, including car- nauba, candellilla, natural African beewax and pure turpentine oil. Attention: Ciranova® Quality Wax is flammable. Produced by Debal Coatings nv Industrieweg 29 - 8800 Beveren-Roeselare Belgium tel. +32 (0) 51 30 11 40 fax +32 (0) 51 31 26 48 [email protected] As with all wood finishing always do a test area first to safeguard against an undesirable outcome. This tech- nical data sheet is merely a guide and not a guarantee. All products are formulated to the best of our know- ledge. The information is given as a result of many years experience. This product has had extensive tests carried out. depending of the type of wood and preparation.
Transcript
Page 1: TECHNICAL DATA SHEET · USE To wax furniture, beams, doors, marble or stone. PREPARATION Sand the new wood with a 150 grit sandpaper and remove the sanding dust. You can use Aquacolor,

1L5L 0,5L

Quality wax

TECHNICAL DATA SHEET

PRODUCT DESCRIPTION A traditional wax made with natural raw materials like African beeswax, candellilla wax, carnauba wax and pure turpentine oil.

TECHNNICAL DATA APPEARANCE pasteODOUR turpentine DENSITY 0,8SOLID CONTENT 30%

USETo wax furniture, beams, doors, marble or stone.

PREPARATIONSand the new wood with a 150 grit sandpaper and remove the sanding dust. You can use Aquacolor, reactive stain or Aquavintage Ciranova �rst to colour the wood.

USER TIPSApply a thin coat with a paintbrush or cloth in the direction of the grain. Leave to dry for 12 hours and bu� with a furniture brush or cloth.

DRYING TIMES12 hours at room temperature.

APPLYING QUANTITY

AFTER TREATMENTUse several layers of Ciranova Quality Wax. For maintenance, use Ciranova® Liquid Wax. Do not use varnish over wax polish.

PRODUCT INFORMATION Available colours : clear, yellow, brown, medium, antique, dark and mahogany. Storage : store in a well ventilated and cool place for up to 2 years.

SPECIAL QUALITIES This product is made from natural raw materials, including car-nauba, candellilla, natural African beewax and pure turpentine oil. Attention: Ciranova® Quality Wax is �ammable.

Produced by Debal Coatings nvIndustrieweg 29 - 8800 Beveren-Roeselare

Belgiumtel. +32 (0) 51 30 11 40fax +32 (0) 51 31 26 [email protected]

As with all wood � nishing always do a test area � rst to safeguard against an undesirable outcome. This tech-nical data sheet is merely a guide and not a guarantee. All products are formulated to the best of our know-ledge. The information is given as a result of many years experience. This product has had extensive tests carried out.

depending of the type of wood and preparation.

Recommended