Knauf ‘CW’ Profile Studs
Galvanized lightweight steel sections to be used as vertical stud framing for Knauf partitions and wall linings.Our standard high quality metal section with detial labeling for easy identification on site. Knauf metal sectionsare cold-rolled from high grade galvanized steel sheets that complies with ASTM 645 - 09a Standard.
Technical Datasheet 05- 2015
Certified by
Notes:
Knauf Head Office
The constructional and structural properties, and characteristic building physics Knauf system can solely beensured with the exclusive use Knauf system components, or other product expressly recommended by Knauf.
Knauf Manufacturing PlantKnauf Qatar Branch
www. .ae
P.O.Box 27111Doha, State of QatarTel: +974 44528191Fax: +974 44528181
Phone: +971 4 337 7170
Fax: +971 4 334 9659
P.O. Box: 112871, Dubai
[email protected] information provided in this leaflet is only intended to give guidance in selecting and using Knauf products. While we make every effort to ensure its accuracy, neither Knauf LLC and its branchesnor any of this employees or affiliates warrant or assume any legal liability or responsibility for the completeness or usefullness of any failure in installation or constructing structure installation or builidingor caused by using this leaflet. Readers are adviced to independently verify this information prior to reply on it. In particular, readers must obtain appropriate independent advice on the use of products in specific structures, installations or buildings to ensure compliance with all regulations, in cluding health and safety regulations. Knauf reserves the right to amend technical specification without notice.
P.O.Box 50006Ras Al Khaimah, U.A.E.Tel: +971 7 221 5300Fax: +971 7 221 5301
Product Description
Knauf ‘CW’ Profile Studs ASTM
Technical Data
Dimensions (mm)
Thickness
0.5
0.5
0.5
0.5
0.5
0.9
0.9
0.9
0.9
0.9
41
64
89
102
152
41
64
89
102
152
33
33
33
33
33
33
33
33
33
33
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
480
480
432
384
588
480
480
288
288
204
160
160
96
144
96
160
160
96
144
64
216
216
273
261
252
384
384
323
347
317
Web Flange Length MetersPer PackPieces
Per PackWeight
(Kg approx.)
CW Studs
Galvanized lightweight steel sections to be used as vertical stud framing for Knauf partitions and wall linings. Our standard high quality metalsection with detial labeling for easy identification on site. Knauf metal sections are cold-rolled from high grade galvanized steel sheets that complieswith ASTM 645 - 09a Standard.
Knauf profiles are produced in 3000mm length, custom lengths are available on request.
available on request.
Other web sizes not mentioned in datasheet are also available, please contact Knauf LLC sales department for checking availabi lity.
Made in UAE
![Advances in CW Ion Linacs · Offine testing without external buncher-l Simulation with TRACK code Advances in CW Ion Linacs IPAC-15 7 -60 0 60 0 0.5 1 Phase [degrees] 20kV-60 0 60](https://static.documents.pub/doc/80x56/5fb5a5028c0b0032bd54ffb9/advances-in-cw-ion-linacs-offine-testing-without-external-buncher-l-simulation-with.jpg)
