Section 570QSIG

Reference

Technical Manual

®3DQDVRQLF

DBS 576 (USA) Ver. 2.5Issued June, 1999

The contents of this document are subject to change without notice and do not constitute a commitment on the part of Panasonic Telecommunication Systems Company (PTSC). Every effort has been made to ensure the accuracy of this document. However, due to ongoing product improvements and revisions, Panasonic cannot guarantee the accuracy of printed material after the date of publication nor can it accept responsibility for errors or omissions. Panasonic will update and revise this document as needed.

The software and hardware described in this document may be used or copied only in accordance with the terms of the license pertaining to said software or hardware.

Reproduction, publication, or duplication of this manual, or any part thereof, in any manner, mechanically, electronically, or photographically, is prohibited without permission of Panasonic Telecommunication Systems Company (PTSC).

Copyright 1999 by Panasonic Telecommunication Systems Company (PTSC)

All rights reserved.

576-25-570 DBS 576 (USA), issued June 1999 3

Contents

Chapter 1. About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 2. Introduction to the QSIG Line . . . . . . . . . . . . . . . . . . . . . 7The QSIG Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Network Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Incoming Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Tandem Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Feature Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9MCO Outgoing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Message Wait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Caller ID Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11QSIG Interface Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Master/Slave Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Layer 1: Sync. Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Network Sync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Layer 2: Direction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Layer 1 level Master/Slave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

For instance; Connection and Master /Slave Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15TDM Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Chapter 4. Quick-Start Programming. . . . . . . . . . . . . . . . . . . . . . . . 19Minimum Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Chapter 5. Programming Reference. . . . . . . . . . . . . . . . . . . . . . . . . 29System Programming (FF1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29QSIG Line (FF2 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Contents Section 570 - QSIG Reference

4 DBS 576 (USA), issued June 1999 576-25-570

List of Tables

Table 1. Maximum Number of QSIG Interface Cards per System . . . . . . . . . 10Table 2. Switch Setting for SW2-2 on ASIG (PRI) Card . . . . . . . . . . . . . . . . . . 11Table 3. Card Type Setting (PRI/30 Card) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

List of Figures

Figure 1. 2-System PBX Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 6Figure 2. 3-System PBX Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 6Figure 3. 4-System PBX Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 7Figure 4. Card Installation in Flexible Slots of CAB96 and CAB96B . . . . . . . . 11Figure 5. Connection of QSIG Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Figure 6. Connection & Master/Slave Setting: TDM Connection . . . . . . . . . . . 14Figure 7. Connection & Master/Slave Setting: NTE . . . . . . . . . . . . . . . . . . . . . . 15Figure 8. Connection & Master/Slave Setting: Direct Connection . . . . . . . . . . 15Figure 9. Cable connection between DBS 576 and DBS 576 . . . . . . . . . . . . . . 15Figure 10. Example: Installation on TSW288 Card . . . . . . . . . . . . . . . . . . . . . . . 16

576-25-570 DBS 576 (USA), issued June 1999 5

Chapter 1. About This Manual

Overview

This manual provides an overview of the DBS 576 Q-signaling (QSIG) interface card, along with installation and programming instructions. The following table summarizes each chapter contained in this manual.

Related Documents

For general instructions on DBS 576 hardware installation, see the Section 300: Installation manual.

Chapter Title Purpose

1 About This Manual Provides an outline of the chapters and lists related documents

2 Introduction to the QSIG Line

Provides an overview of the DBS 576 QSIG inter-face card, plus information on pre-installation requirements.

3 Installation Provides step-by-step instructions on installing the DBS 576 QSIG hardware.

4 Quick-Start Pro-gramming

Summarizes the programs that are essential to qsig installation.

5 Programming Ref-erence

Contains a complete list of aqig programming commands. Each command description includes a list of the available options and the associated pro-gramming addresses.