R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Contents
Technical Metal Industrial Co. L.L.C.
Introduction3
4
6
7
8
9
10
11
13
14
15
16
17
Wall Mounted SeriesFeaturesTechnical DrawingsColour OptionsSingle Section Wall MountedMaterial Speci�cationsDouble Section Wall MountedMaterial Speci�cations
Network & Server CabinetsNetwork CabinetServer CabinetFeaturesTechnical DrawingsOptional DoorsSupply IncludesColour OptionsPlain Doors CabinetMaterial Speci�cationsPerforated Doors CabinetMaterial Speci�cationsGlazed Doors CabinetMaterial Speci�cationsDouble Glazed Doors CabinetMaterial Speci�cations
Etisalat & Du Approved CabinetsDoor Design OptionsTechnical Drawings
18
19
21
22
23
24
25
26
27
28
30
32
33
Additional ProductsCupboardMaterial Speci�cationsSteel Mesh Cage
Surface Protection
AccessoriesRack ShelvesCooling SolutionCable ManagementPower Distribution Units (PDU)Castor Wheels Bolts, Nuts & Washers
Custom Designed Cabinets
4 Post Open Frame RackTechnical DrawingsMaterial Speci�cationsFeatures
2 Post Open Frame RackTechnical DrawingsMaterial Speci�cationsFeatures
Material Speci�cationsFeaturesColour OptionsFramed Flush MountWall MountMaterial Speci�cations
“We, at Technical Metal Industrial Co. L.L.C. take pride in declaring the company’s commitment to satisfy our customers by providing high quality products and promptly delivering them as per the agreed contractual requirements”.
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Industrial & IT CabinetsIntroduction
TMI is a privately owned company, established in 1997 in the Emirate of Abu Dhabi, United Arab Emirates and located on approximately 850,000 square feet in the Industrial City of Abu Dhabi (ICAD).
Specializes in metal processing and manufacturing of Expanded Metal & Plastering Accessories, Roll Formed Profiles,Suspended Ceiling Systems, Cable Management Systems, Metal Doors & Frames, Industrial Shelving, Metal Cabinets,Gratings, Metal Ladders and specialized building material products. We are an ISO 9001, 14001 & 18001 Certifiedcompany. Our emphasis is on quality products catering to today’s competitive and demanding businessenvironment. By introducing the latest, advanced technologies in our production lines, we ensure that our highproduction targets are achieved.
Furthermore, with deep knowledge within our manufacturing system capabilities, our products have achieved a veryhigh quality standard in this industry. Having earned a reputation as a manufacturer and supplier of quality products,we fully recognize that constant improvement is a vital requirement for our continued success.
TMI cabinets and racks offer a wide variety of products that protect and enhance the look of your electronic environment. Our server/networking racks are top efficient and ready to use for network distribution. Our TMI rack is cost effective and offers you the robust 19”(482.6mm) mounting frame. Cabinets and racks are available in standard height, width and depth, that ranges from 6U wall mounted racks to 47U fully enclosed and customizable cabinets. All TMI wall mounted and free standing cabinets have multiple cable entry from the top and bottom. They also can take load “weight” that meets and exceeds the industry standards. In addition, we offer a full range of accessories, such as shelves, PDUs and cable management accessories.
TMI cabinets and racks are constructed from steel sheets. They are specially designed using CAD software, punched and cut by CNC Turret Punch machines, folded by CNC Press Brake machines, then joined together by spot welding. Special knockouts are added to the bottom and top panels, offering effortless cable access. In the case of wall mounted racks, keyholes are added to the back for easy hanging. TMI cabinets and racks go through degreasing and phosphating treatment for corrosion prevention, before proceeding to our powder coating line.
globalgroupISO 9001/ISO 14001
MANAGEMENTSYSTEMS
U K A S
0039
®
ISO 9001:2008 Reg. No. 80Q08961 ISO 14001:2004 Reg. No. 80E08961
OHSAS 18001:2007 Reg. No. 18O08961
OHSAS 18001
3
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R4
TMI Network & Server Cabinet is specially designed for network servers of high density in IT environment. With accessories of brackets, cable managers, power distribution units (PDU) fixing slots and high quality locks.
Network Cabinet
Model Rack Units Width Depth
ITR 168321 32 600 800ITR 188321 32 800 800ITR 180321 32 800 1000ITR 160321 32 600 1000ITR 188371 37 800 800ITR 180371 37 800 1000ITR 168421 42 600 800ITR 188421 42 800 800ITR 160421 42 600 1000ITR 180421 42 800 1000ITR 168471 47 600 800ITR 160471 47 600 1000ITR 188471 47 800 800ITR 160471 47 800 1000
(mm) (mm)
19” cabinet width 600, 800, 1000 / depth 800, 1000, 1200
FeaturesEfficiently designed 32U, 42U & 47U server cabinets.Solid steel welded & bolted frame to ensure stability.Ventilated glazed front door and ventilated steel rear door.Plug-in side wall.Bottom plate with multi piece gland plate.Heavy Duty leveling feet.Supplied as flat pack, easy to assemble. Earthing of all enclosure panel possible through copper coated bolts.Pre-punched holes on top and rear of the cabinet for good ventilation.Pre-punched holes and opening on top and bottom of the cabinet for cable entry maximum versatility.
Network & Server CabinetsNetwork Cabinet Supply Includes Material Specifications Server Cabinet Colour Options Glazed Doors CabinetFeatures Plain Doors Cabinet Material Specifications Technical Drawings Material Specifications Double Glazed Doors CabinetOptional Doors Perforated Doors Cabinet Material Specifications
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
1
2
3
45
6
7
89
10
Adjustable Mounting Rails
Optional Fans on the Top Cover
Adjustable Levelling Feet & Castors
Spring LockToughened Glass Front Door
Removable Side Panel
1. Rear Door2. Top Panel3. Right Side Panel4. Frame5. Cable Guider (Optional)6. 19” Rail7. Bottom Panel8. Security Glass Front Door 9. Left Side Panel10. Steel Front Door
5
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Colour Options
Powder Coating / Industrial PaintingTMI Cabinets factory offer any colour finished and etched primed paint. We offer a wide range of semi gloss finishes.
Supply Includes
Enclosure with doors, front glazed door, rear steel door, both are ventilated.19”-Mounting angles in the front and rear.Roof plate with cable entry and ventilation. Bottom with multi - piece gland plate.Plug-in side wall (optional with lock).Earthing of all enclosure panels possible.Leveling feet.RAL 7035 textured (Light Grey).Optional: RAL 9005 Textured (Black).
Technical Drawings
Optional Doors
The front door is made of toughened glass or vented holes, which is at your choice.
6
Network & Server Cabinets
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
44 TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Network cabinets are available in standard heights, widths and depths. Width:
Depth:600 x 800 mm
800 & 1000 mm
Material Specifications Material : Cold rolled steel.Thickness : 1.2 - 1.5mmLoading Capacity : 500kgSurface Finish : Degreased and phosphated for corrosion prevention.Finish : Powder Coating in RAL 7035 (Light Grey) - Textured.
Network & Server Cabinets32U, 42U & 47U
Plain Doors Cabinet
R
7 TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Network cabinets are available in standard heights, widths and depths.
Width:Depth:
600 x 800 mm
800 & 1000 mm
Material Specifications Material : Cold rolled steel.Thickness : 1.2 - 1.5mmLoading Capacity : 500kgSurface Finish : Degreased and phosphated for corrosion prevention.Finish : Powder Coating in RAL 7035 (Light Grey) - Textured.
Perforated Doors Cabinet
R
8 TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
6 TECHNICAL METAL INDUSTRIAL Co. L.L.C.
Network cabinets are available in standard heights, widths and depths.
Width:Depth:
600 x 800 mm
800 & 1000 mm
Material Specifications Material : Cold rolled steel.Thickness : 1.2 - 1.5mmLoading Capacity : 500kgSurface Finish : Degreased and phosphated for corrosion prevention.Finish : Powder Coating in RAL 7035 (Light Grey) - Textured.
Glazed Doors Cabinet
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R 9
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R 7 TECHNICAL METAL INDUSTRIAL Co. L.L.C.
Network cabinets are available in standard heights, widths and depths.
Width:Depth:
600 x 800 mm
800 & 1000 mm
Material Specifications Material : Cold rolled steel.Thickness : 1.2 - 1.5mmLoading Capacity : 500kgSurface Finish : Degreased and phosphated for corrosion prevention.Finish : Powder Coating in RAL 7035 (Light Grey) - Textured.
Double Glazed Doors Cabinet
R
10 TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Wall Mounted SeriesFeatures Material Specifications Technical Drawings Double Section Wall MountedColour Options Material SpecificationsSingle Section Wall Mounted
Model Rack Units Width Depth
ITR 264061 6 600 450ITR 264091 9 600 450ITR 264121 12 600 450ITR 264151 15 600 450ITR 264181 18 600 450ITR 264211 21 600 450ITR 265061 6 600 550ITR 265091 9 600 550ITR 265121 12 600 550ITR 265151 15 600 550ITR 265181 18 600 550ITR 265211 21 600 550
(mm) (mm)
FeaturesWall mounting or less standing unit.Removable side and back panels.Fixed (welded) rear wall.Top and bottom panel cable entry.Ventilation fans are optional.Front glass and steel doors.Embedded grounding copper coated stud bolts.Optional: RAL 9005 Textured (Black).
TMI Wall Mounted Series are designed with provisions to integrate wall mounting, easy equipment access and cable management.
TMI Wall Mounted Series are perfect for network equipment in IT environment with limited floor space.
11
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R12
Wall Mounted Series
1
2
3
4
5
6
7
8
9
1. Rear Door (optional)2. Right Side Door3. Top Panel4. Cabinet Holder5. Bottom Panel6. Frame7. Steel Front Door8. Toughened Glass Front Door9. Left Side Door
Adjustable Mounting Rails
Optional Fans on the Top Cover
Small Round Lock Toughened Glass Front Door
Removable Side Panel Adjustable Levelling Feet & Castors
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
13
Technical Drawings
Colour Options
Powder Coating / Industrial PaintingTMI Cabinets factory offer any colour finished and etched primed paint. We offer a wide range of semi gloss finishes.
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R1410
19” Wall Mounted Cabinets are available in standard heights, widths and depths.
Width:Depth:
600 mm
450 & 550 mm
Material Specifications Material : Cold rolled steel.Thickness : 1.0 - 1.2mmLoading Capacity : 60 -100kgSurface Finish : Degreased and phosphated for corrosion prevention.Finish : Powder Coating in RAL 7035 (Light Grey) - Textured.
Wall Mounted Series6U, 9U, 12U, 15U, 18U & 21U
Single SectionWall Mounted
R
14 TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
15
Double SectionWall Mounted
Width:Depth:
600 mm
450 & 550 mm
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R 15
Material Specifications Material : Cold rolled steel.Thickness : 1.0 - 1.2mmLoading Capacity : 60 -100kgSurface Finish : Degreased and phosphated for corrosion prevention.Finish : Powder Coating in RAL 9005 (Black) - Textured.
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R16
Etisalat & Du Approved Cabinets
Door Design Options
1 2 3 4
Door Design Options Features Wall Mount Technical Drawings Colour Options Material Specifications Framed Flush Mount
Model Rack Units (U) Width (W)
ITR 86006 6 600ITR 86009 9 600ITR 86012 12 600ITR 86015 15 600ITR 86018 18 600ITR 86021 21 600
(mm)
Model Rack Units (U) Width (W) Depth (D) Type
ITR 561121 12 600 150 Flush MountITR 261121 12 600 150 Wall MountITR 263121 12 600 300 Wall Mount
(mm) (mm)
Choose your own design
Add the relevant - design number, either 1, 2, 3 or 4 behind your selected door Art - No.
Example: You need a 12U door in design No. 3, then your order should show the following Art - No: ITR 760123
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
17
Technical Drawings
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R18
Material Specifications
Material : Cold rolled steel.Thickness : 1.0 - 1.2mmLoading Capacity : 60kg Surface Finish : Degreased and phosphated for corrosion prevention.Finish : Powder Coating in RAL 7035 (Light Grey) - Textured.
FeaturesEfficiently designed 12U server cabinets.Solid steel construction.Available on flush mounted and wall mounted.Adjustable 19” mount.Mechanical open / close lock.Lock handle.
Inner mount plate with grid mount.Top and bottom panel cable entry.Ventilation holes on front panel.Cabinet can be fitted with 1U patch panel.Embedded grounding copper coated stud bolts.Optional: different door designs - see page 16.
Colour Options
Powder Coating / Industrial PaintingTMI Cabinets factory offer any colour finished and etched primed paint. We offer a wide range of semi gloss finishes.
Etisalat & Du Approved Cabinets
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
19
Cabinets approved by Etisalat & Du are available in standard size of 12U.
Etisalat & Du Approved CabinetsStandard size12U
Framed Flush Mount
R
Wall Mount
R
Width:Depth:
600 mm
150 & 300 mm
Material Specifications Material : Cold rolled steel.Thickness : 1.0 - 1.2mmLoading Capacity : 60 -100kgSurface Finish : Degreased and phosphated for corrosion prevention.Finish : Powder Coating in RAL 7035 (Light Grey) - Textured.
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R 19
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R20
Etisalat & Du Approved Cabinets
Width:Depth:
600 mm
150 & 300 mm
Material Specifications Material : Cold rolled steel.Thickness : 1.0 - 1.2mmLoading Capacity : 60 -100kgSurface Finish : Degreased and phosphated for corrosion prevention.Finish : Powder Coating in RAL 7035 (Light Grey) - Textured.
20 TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
21
2 Post Open Frame RackTechnical DrawingsMaterial Specifications
Horizontal Beam
Pole
Castor(2 with brakes)
Plinth
Front ViewSide View
Top View
Technical Drawings
Model Width (W) Depth (D) Height (H)
POFR1185 600 600 1185 POFR1625 600 600 1625POFR1850 600 600 1850POFR2070 600 600 2070POFR2295 600 600 2295
(mm) (mm) (mm)
Material Specifications
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R 171022
R
Ideal for space constrained or cost conscious 19 inch rack mount applications. Multiple units can be bolted together side by side.
FeaturesSolid structure, modular design, easy mounting.Low cost, easy disassemble, delivery and assemble.Many accessories optional according to requirement.
2 Post Open Frame Rack19 inch
22 TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
23
Horizontal Beam
Pole
Castor(2 with brakes)
Plinth
Front ViewSide View
Top View
Model Width (W) Depth (D) Height (H)
POFR1187 600 600 1187 POFR1631 600 600 1631POFR1854 600 600 1854POFR2076 600 600 2076POFR2298 600 600 2298
(mm) (mm) (mm)
Material Specifications
Technical Drawings
4 Post Open Frame RackTechnical DrawingsMaterial Specifications
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R24
Ideal for space constrained or cost conscious 19 inch rack mount applications. Multiple units can be bolted together side by side.
FeaturesSolid structure, modular design, easy mounting.Low cost, easy disassemble, delivery and assemble.Many accessories optional according to requirement.
4 Post Open Frame Rack19 inch
R
24 TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
We provide you with a variety of accessories, which are compatible with the leading brands of racks & cabinets in the market.
Cooling solution accessories enhance the natural convection airflow within a cabinet when installed with standard 19” rack. It is mainly used for 19” rack-mounted equipment and data center for certain power of targeted heat.
25
Rack Shelves Cooling Solution
Accessories
Easy to install venter 19’ shelf mounts easily with screws onto rack rails of IT department.
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Power Distribution Units are an essential element in managing power capacity and functionality for critical network, server and data center equipment.
26
Cable Management Power Distribution Units (PDU)For routing and bunding cable on standard 19” rack, makes a complete cable management system when used with vertical and horizontal cable managers.
Accessories
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
A set of castor wheels. Maximum Loading capacity 250kg
Castor Wheels Bolts, Nuts & Washers
27
Accessories
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
ITR0003
ITR0001
ITR0005
ITR0004
Custom Designed CabinetsWe can do any customized fabrication for steel cabinets in any design or colour. Sample models are shown below.
28
ITR0002
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
29
ITR0011ITR0010
ITR0006
ITR0007 ITR0008
ITR0012
ITR0009
ITR0014ITR0013
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Additional Products
CUPBOARD
Material Specifications
Material : Galvanized Steel Thickness : 1.2mm Finish : Powder CoatingSize : As per client request
30
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
31
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
STEEL MESH CAGE
32
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Surface ProtectionThe treatment of outer surfaces
Degreasing of sheet steel.Sheet steel is then phosphated.Powder Coating (60-80 micron).Stove enameling.
Standard Powder Coating is resistant to
Mineral Oil.Lubricants.Solvents during cleaning.Weak acids and alkaline.
Coating Procedures Technical Properties
Degreasing and Phosphating
Textured Powder Coating
Used for passivation, as corrosion protection and to improve paint adhesion.
Powder coating is distinguished by a high level of mechanical resistance, excellent corrosion protection, good resistance to chemical and by its temperature, weather and its facility for decontamination.
33
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
Manufacturers of:Ceiling Suspension Systems & PartitionsExpanded Mesh & Metal ProductsCable Management SystemsIndustrial GratingsStone FixturesMetal Doors & FramesIndustrial & IT CabinetsHighway GuardrailFencing & BarriersIndustrial Shelving SystemsAluminium Ladders
In House Services:Steel FabricationPowder CoatingHot Dip GalvanizingIndustrial Painting
Manufacturers of:Ceiling Suspension Systems & PartitionsExpanded Mesh & Metal ProductsCable Management SystemsIndustrial GratingsStone FixturesMetal Doors & FramesIndustrial & IT CabinetsHighway GuardrailFencing & BarriersIndustrial Shelving SystemsAluminium Ladders
In House Services:Steel FabricationPowder CoatingHot Dip GalvanizingIndustrial Painting
TMI - Abu DhabiTel. : +971 (2) 5502025Fax : +971 (2) 5502024P.O. Box: 41558Abu Dhabi
TMI - Al AinTel. : +971 (3) 7224768Fax : +971 (3) 7224769P.O. Box: 99155Al Ain
TMI - DubaiTel. : +971 (4) 8852243Fax : +971 (4) 8852249 P.O. Box: 86029Dubai
TMI - Ras Al KhaimahTel. : +971 (7) 2282332Fax : +971 (7) 2282232P.O. Box: 33239Ras Al Khaimah
E-mail : [email protected]: www.tmi-co.com
34
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
3
Global GROUP Global GROUPOHSAS 18001
Reg. No. 18O08961
ISO 9001
UKASQUALITY
MANAGEMENT
Reg. No. 80Q08961
039
Metal Doors & FramesIntroduction
TMI is a privately owned company, established in 1997 in the Emirate of Abu Dhabi, United Arab Emirates and located on approximately 850,000 square feet in the Industrial City of Abu Dhabi (ICAD).
Specializes in metal processing and manufacturing of Expanded Metal & Plastering Accessories, Roll Formed Profiles,Suspended Ceiling Systems, Cable Management Systems, Metal Doors & Frames, Industrial Shelving, Metal Cabinets,Gratings, Metal Ladders and specialized building material products. We are an ISO 9001, 14001 & 18001 Certifiedcompany. Our emphasis is on quality products catering to today’s competitive and demanding businessenvironment. By introducing the latest, advanced technologies in our production lines, we ensure that our highproduction targets are achieved.
Furthermore, with deep knowledge within our manufacturing system capabilities, our products have achieved a veryhigh quality standard in this industry. Having earned a reputation as a manufacturer and supplier of quality products,we fully recognize that constant improvement is a vital requirement for our continued success.
Developing products applicable to the changing industry, TMI has a new state of art metal doors manufacturing facility. Fire rated and non-fire rated steel doors are available in different configurations for commercial, residential, Industrial and Institutional buildings based on the functional needs and economical considerations. Our quality products range from standard steel doors and frame profiles, to special custom designs for various architectural and engineering applications.
Several types of doors are available for different needs, and play a very important role in a building’s fire resistance; allow people to evacuate safely from a building or fire areas, while limiting the spread of fire. Fire doors serve as a regular door, while protecting life and property by reducing fire hazards.
TMI doorset tested in accordance with British Standard BS 476 Part 22 at Warrington Certification Limited UK and certified by certifire.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE OF APPROVALNo CF 705
This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products
The undermentioned products of
TECHNICAL METAL INDUSTRIAL CO. L.L.C P.O. Box: 41558, Abu Dhabi, United Arab Emirates
Tel: +971 2 5502025 Fax: +971 2 5502024 Website: www.tmi-co.com
P. O. Box: 86029, Dubai, United Arab Emirates Tel: +971 4 8858036 Fax: +971 4 8858658
Website: www.tmi-co.com
Have been assessed against the requirements of the Technical Schedule(s) denoted below and are approved for use subject to the conditions
appended hereto:
______________________________________________________________________________
CERTIFIED PRODUCT TECHNICAL SCHEDULE
Mineral Fibre CoredSteel Doors
TS12 Hinged or Pivoted FireResisting Pedestrian TypeDoorsets with Metallic Leavesand Frames
Signed and sealed for and on behalf of CERTIFIRE
Sir Ken Knight Issued: 28th October 2009 Chairman - Management Council Reissued: 21st October 2014
Valid to: 20th October 2019 Page 1 of 3
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE OF APPROVALNo CF 706
This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products
The undermentioned products of
TECHNICAL METAL INDUSTRIAL CO. L.L.C P.O. Box: 41558, Abu Dhabi, United Arab Emirates
Tel: +971 2 5502025 Fax: +971 2 5502024 Website: www.tmi-co.com
P. O. Box: 86029, Dubai, United Arab Emirates Tel: +971 4 8858036 Fax: +971 4 8858658
Website: www.tmi-co.com Have been assessed against the requirements of the Technical Schedule(s)
denoted below and are approved for use subject to the conditions appended hereto:
______________________________________________________________________________
CERTIFIED PRODUCT TECHNICAL SCHEDULE
Paper Honeycomb CoredSteel Doors
TS12 Hinged or Pivoted FireResisting Pedestrian TypeDoorsets with Metallic Leavesand Frames
Signed and sealed for and on behalf of CERTIFIRE
Sir Ken Knight Issued: 29th October 2009 Chairman - Management Council Reissued: 21st October 2014
Valid to: 20th October 2019 Page 1 of 3
Engi
neer
ing
Dep
artm
ent
R
R
TECHNICAL METAL INDUSTRIAL Co. L.L.C. R
ED 12-2015
globalgroupISO 9001/ISO 14001
MANAGEMENTSYSTEMS
U K A S
0039
®
ISO 9001:2008 Reg. No. 80Q08961 ISO 14001:2004 Reg. No. 80E08961
OHSAS 18001:2007 Reg. No. 18O08961
OHSAS 18001