12
LX ™ 10 MULTIPURPOSE DRILL (DB540) Technical Overview Copyright © 2011 Boart Longyear. All rights reserved.
LX™10 MULTIPURPOSE DRILL (DB540)Technical Overview
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
LX™10 MULTIPURPOSE DRILLHIGH DRILLING POWER IN A VERSATILE TRACK BASED FORMAT, THE MULTIPURPOSE LX™10 IS AN ESSENTIAL TOOL ON TODAY’S JOB SITE.
Power and VersatilityThe LX10 features a powerful Deutz tier 3 liquid cooled diesel engine, producing 147KW (197hp) at 2,300 rpm. The LX10 has a maximum breaking torque of 44 kNm (31,140 lb-ft), 15 t of pull back force and 10 t of pulldown force
Multi-purposeThe LX10 is ideal for rotary, wireline & conventional coring, DTH drilling, double head rotary, auger and mini piling.
SafetyThe LX10 comes loaded with standard safety features. Thesafety cage ensures drillers remain a safe distance from the drillstring, while low speed and low torque rotation ensures safe rodmanagement. The steel crawlers coupled with the LX10’s upright stability make this machine extremely stable on uneven formations.
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Patents 7,770,668 and 7,779,932
For more information on the LX™10 scan with a QR code reader on your smart phone.
POWERFUL STEEL CRAWLERSEnsure mobility on difficult terrain.
1,000 MM MAST DUMPFor improved positioning on rough terrain
STANDARD HYDRAULIC SIDE SHIFTFor easy rod-pulling and clear access to center line
1
3
2
1
2
3
305 MM DOUBLE CLAMPFor making and breaking rod joints quickly
4
HYDRAULIC MAST RAISINGFor increased mobility
5
STANDARD SAFETY FEATURESSafety cage, low speed and low torque rotation for safe rod management
4
5
LX™10 TECHNICAL INFORMATION
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Drilling Depth GuidelinesMetric U.S.
Core DrillingNQ / NQ2” / NV / NV2” 955 m 3,130 ftHQ / HV 800 m 2,620 ftPQ / PV 580 m 1,900 ftSQ 450 m 1,475 ftRotary Drilling (Tricone)Hole diameter 216 mm (8.5 in) 280 m 920 ftAuger DrillingMaximum hollow stern ID 209 mm 8 1/4 inDTH Drilling PackageMaximum size DTH hammer 275 mm (11 in) @max 66m3 / min @ max 17 barMaximum depth capacity 200 m 656 ftRecommended hole size 305 mm 12 inMaximum hole size 406 mm 16 inRecommended rod size 6 5/8 API 6 5/8 API
Prime MoverMetric U.S.
Standard Unit Deutz TCD2012L062V liquid cooled engine, com IIIFuel DieselNo. of Cylinders 6Swept Volume 7146 ccm 436 cubic inPower 147 kW @ 2300 rpm 197 hp @ 2300 rpmTorque 702 Nm 500 lbf-ftFuel Tank Capacity 200 l 53 gSpecific fuel comsumption 200 g/kWhBattery Voltage 24V
Rotary Head DD54Metric U.S.
Hydraulic Motor1st gear 80 - 400 rpm 10120 - 2025 Nm 7468 - 1494 lb-ft2nd gear 110 - 550 rpm 4330 - 860 Nm 3195 - 634 lb-ftRotation Motor Rexroth hydraulic motor -variable / reversible with pressure
remoteMechanical Transmission 2 speedGear Ratio - 1st 10.18:1Gear Ratio - 2nd 4.36:1Bore I.D. 100 mm 4 inFloating Spindle I.D. 42 mm 1.65 in
3
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Rotary Head DD54 (continued)Floating Spindle - Stroke 125 mm 5 inDrive Flange 2 3/8” API or 2 7/8”Head carriage with hydraulic side shiftOptional rod handling assist system available
Rotary Head HY77Metric U.S.
Max. Torque1st Gear 0 - 50 rpm 10000 Nm 7375 lbf2nd Gear 0 - 120 rpm 5600 Nm 4130 lbf3rd Gear 0 - 800 rpm 745 Nm 550 lbfRotation Motor Danfoss Variable MotorsGear Ratio 5.19:1Bore I.D. 100 mm 4 inTop Drive Flange 2 7/8” API Reg BoxHead carriage with hydraulic Side Shift and front tip outHead includes Break-O-Matic system for additional torque when breaking rods
Double Rotary Head XRH - 21 / XRH2 - 10TSMetric U.S.
Casing Head XRH3 - 21 3 speedMax. Torque
1st Gear 26 rpm 21 kNm 15,500 ft-lbf2nd Gear 52 rpm 14 kNm 10,325 ft-lbf; 5,170 ft-lbf3rd Gear 79 rpm 7 kNm 413 ft-lbfInner Rod Head XRH2 - 10TS 2 Speed
Max. Torque1st gear 44 rpm 10 kNm 7,400 ft-lbf2nd gear 89 rpm 5 kNm 3,700 ft-lbfElectrically controlled, hydraulically shifting for each gearDouble head carriage with hydraulic side shiftAll additional head tooling available (Flushing head, shock absorber, adapter flanges, etc)
Hydraulic SystemMetric U.S.
Primary Pump A10VO60 Rexroth bent axis, variable displacementMaximum Flow 120 lpm @ 2200 rpm 31.7 gpm @ 2200 rpmMaximum Pressure 20 MPa 2,900 psiSecondary Pump A11VO75 Rexroth bent axis, variable displacementMaximum Flow (1st) 150 lpm @ 2200 rpm 38.1 gpm @ 2200 rpmMaximum Flow (2nd) 150 lpm @ 2200 rpm 38.1 gpm @ 2200 rpmMaximum Pressure (1st) 25 MPa 3,625 psiMaximum Pressure (2nd) 25 MPa 3,625 psiOil Tank Capacity 600 l 158 gal
4
LX™10 TECHNICAL INFORMATION
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Drill Mast and Feed System with Feed CylinderMetric U.S.
Total Length 7,25 m 24 ftFeed Stroke 4,0 m 13.2 ftFeed Speed Normal / fastUp 7 / 22 m/min 23 / 72 ft/ minDown 11/ 32 m/min 36 / 104 ft/minPull down 100 kN 22,480 lbfPull Back 150 kN 33,700 lbfMast Dump 1000 mm 3.3 ftDrilling Inclination 45° off horizontal to 90° vertical down
UndercarriageMetric U.S.
Type Crawler mounted with steel tracksMax. Driving Speed 1,7 km/hr 1.1 mphAxis Distance 2,530 mm 100 inMax. Ground Pressure 0,066 MPa 0.96 psiWidth of Track Shoe 500 mm 19.7 inClimbing Capacity 60% (approx. 30°)
Additional Included EquipmentHydraulic Leveling Jacks 4 pcsNight Lights 5 pcsTowing Hook Rear of rigFixed Rod Storage RackHydraulic Mast Raising CylindersSafety Guarding and Emergency Stop Switches
Optional EquipmentRod Clamp 305 mm (12”)
Metric U.S.Maximum Clamping Diameter 305 mm 12 inMaximum Clamping Force 330 kN 75,000 lbfMaximum Breaking Torque 30 kNm 22,140 lbf-ft
Rod Clamp 406 mm (16”)Metric U.S.
Maximum Clamping Diameter 406 mm 16 inMaximum Clamping Force 400 kN 90,000 lbfMaximum Breaking Torque 44 kNm 31,200 lft-ft
5
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Main Hoist S45VMetric U.S.
Line Pull 57 kN 12,800 lbftRope Speed @ 50 lpm 50 m/min 164 ft/minFor Cable Ø18 mm (0.7 in) 50 m 164 ft
Support PL5 HoistMetric U.S.
Line Pull 19 kN 4271 lbfRope Speed @ 59 lpm 35 m/min 115 ft/minCable Ø12mm (0.47 in) 38 m 125 ft
Support PL2 HoistMetric U.S.
Line Pull 9 kN 2023 lbfRope Speed @ 50 lpm 30 m/min 98 ft/minCable Ø8mm (0.32 in) 40 m 131 ft
Wireline Hoist WL54Metric U.S.
Line Pull 6,5 kN 1461 lbfLine Speed @ 50 lpm 100 m/min 328 ft/minCable Ø6mm (0.24 in) 350 m 1150 ft
Wireline Hoist WL100Metric U.S.
Line Pull - Bare Drum 933 kg 2190 lbfLine Pull - Full Drum 288 kg 502 lbfLine Speed - Bare Drum 145 m/min 475 ft/minLine Speed - Full Drum 433 m/min 1422 ft/minCable Ø4.8mm (0.19 in) 1000 m 3280 ft
Mud Pump Type FMC W1122BCDMetric U.S.
Working Pressure 50 bar 725 psiContinuous Delivery 72 l/min 19.0 gal/minMaximum Delivery 130 l/min 34.3 gal/minMud Pump Gardner Denver FG-FGX
Metric U.S.Working Pressure 21 bar 305 psiMaximum Flow 600 l/min 158 gal/min
6
LX™10 TECHNICAL INFORMATION
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Combi Block Mud Pump Group CB80-250Metric U.S.
Working Pressure 10 bar 145 psiMaximum Flow 2500 l/min 660 gal/min
Mud Pump Deltapump 200Metric U.S.
Working Pressure 30 bar 435 psiMaximum Flow 200 l/min 53 gal/min
Oil Line Lubricator For DTH-DrillingMetric U.S.
Oil Tank Capacity 20 l 5.3 galOperating Pressure 25 bar 363 psi
High Pressure Mist Washdown Pump - HPW 200/30Metric U.S.
Flow 30 l/min 8 gal/minOperating Pressure 200 bar 2900 psi
Radio Remote Control For Driving
ODEX Dust Deflector - Mounts Under Drill MastMetric U.S.
Diameter 305 mm 12 in
ToolboxIncludes all basic tools for rig maintenance and lubrication
Welding Generator With Auxillary PowerPower Output (Nominal) 6 kVaVoltage 400 / 230 VNorth American Voltage Available
Compressor For Pneumatic Tools - HK400Metric U.S.
Flow 400 l/min 14 cfmPressure 8 bar 116 psi
7
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
SPT (Standard Penetration Test) Auto Hammer With Automatic Blow CounterMetric U.S.
Impact Rate 1 - 30 bpmLength of Travel 762 mm 30 inHammer Weigth 63,5 kg 140 lbTotal Weigth 180 kg 397 lb
WeightOperational Weight = 16500 kg (36376 lb)
Consisting of:Diesel Power Unit Group DEUTZ TCD2012, 7.15 litre, 6 cylinderHydraulic ModuleMain Hoist c/w Cable S45VHydraulic Mast Raising (Independent)Lower Mast AssemblyRotation Unit Group DD54Crawler FrameBatteryLevelling Jacks (Hydraulic)Operator ControlsFoot Clamp and Breaking Clamp
MeasurementsWith Safety CageHeight = 3620 mm (11.9 ft)
8080 mm(26.5 ft)
7720 mm (25.3 ft)
8
3,150 mm (10.3 ft)
2300 mm(7.6 ft)
NOTES
9
NOTES
10
www.BoartLongyear.com March 2011
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All R
ight
s R
eser
ved.
MINING AND EXPLORATION DRILLING PRODUCTS
Genuine Q™ Wireline Tooling
Diamond Products
www.BoartLongyear.com • ASX: BLY
Rods and Casing
Jan 2012
Global Headquarters Boart Longyear10808 South River Front ParkwaySuite 600South Jordan, Utah 84095United States of [email protected]
Tel: +1 801 972 6430Fax: +1 801 977 3374
Latin America Boart LongyearPortal Riesco Av. El Salto 4001, HuechurabaSantiago, Chile 858 [email protected]
Tel: +56 2 595 3300 Fax: +51 242 671
Canada Boart Longyear 2442 South Sheridan WayMississauga, OntarioCanada L5J [email protected]
Tel: +1 905 822-7922 Fax: +1 905 822-7232
Europe Boart Longyear12 Avenue des MorginesCH1213 Petit-Lancy, Geneva, Switzerland [email protected]
Tel: +41 22 709 0800Fax: +41 22 709 0801
Sub-Saharan Africa Boart Longyear Cycad House, Constantia Office ParkCnr 14th Avenue and Hendrik Potgieter Weltevreden Park, 1709Gauteng, South [email protected]
Tel: +27 11 767 9300Fax: +27 11 767 9301
Asia PacificBoart Longyear 26 Butler BoulevardAdelaide, [email protected]
Tel: +61 8 8375 8375Fax: +61 8 8375 8497
