The 20th International Conference onElectrical Machines and Systems
ICEMS 2017www.icems2017.org
11 ‐ 14 August 2017
International Convention CentreSydney, NSW, Australia
The 20th International Conference on Electrical Machines and Systems
(icems2017.org)
TECHNICAL PROGRAM
i
Korean Institute of Electrical Engineers (KIEE), EMECS Society
ICEMS 2017 would like to express our gratitude for the generous support received from the following:
Organizer and Sponsor
Technical Sponsors:
Financial Sponsors:
The 20th International Conference on Electrical Machines and Systems®
ii
Dear Colleagues, Started in Beijing, China, in 1987, the International Conference on Electrical Machines and Systems (ICEMS) has been run for 19 times. The 20th ICEMS or ICEMS2017 will be run in Sydney, Australia, on 11-14 August 2017. This event will be the 30th anniversary of ICEMS. As a regular annual event, ICEMS is sponsored by the China Electrotechnical Society (CES), Korean Institute of Electrical Engineers (KIEE), and Institute of Electrical Engineers of Japan Industry Applications Society (IEEJ-IAS), along with the technical co-sponsorship from the IEEE Industry Applications Society (IEEE-IAS). ICEMS2017 is also proudly sponsored by the office of the NSW Chief Scientist and Engineer, Australia. This conference aims to provide a forum for researchers, scientists, and engineers to present their latest R&D achievements and to exchange useful information and experiences in the field of electrical machines and systems, including electrical machines of all types and all aspects (such as new structures, materials, and analysis and design methods), power electronic converters, motion control, electrical drive, and application systems, as well as other relevant areas. As one of the largest cities in the southern hemisphere, Sydney has a great deal to offer to its visitors. Besides the natural beauties and famous constructions, such as the Harbour Bridge and the Opera House, Sydney features a unique blend of multiple cultures. In Sydney, you can find people from almost anywhere in the world, and you can enjoy different cuisine styles, such as Chinese, French, Indian, Italian, Japanese, Korean, and Thai. The conference venue is the International Convention Centre (ICC) Sydney located in the beautiful and exciting Darling Harbour, in the heart of Sydney and the most popular destination for international visitors and locals alike. It is next to the central business district and has many exciting attractions and events everyday. Dear friends, we sincerely welcome you to come to Sydney in 2017 and work together with us to make ICEMS2017 a new success in the ICEMS history! Thank you.
Prof. J.G. Zhu General Chairman ICEMS2017
Prof. Z.Q. Zhu Chairman, Technical Program CommitteeICEMS2017
iii
Conference Venue and Floor Plan
Venue: International Convention Centre (ICC) Sydney
iv
Daring Harbour Theatre
Skylight to pyrmont theatre foyer
Close-up View
Level 3 – Convention Centre
v
Guidelines for Transportation in Sydney UTS ⇔ ICC Sydney
Walk: 20 mins Taxi: 7 mins Train: L1 16 mins Paddy's Markets Station ⇔ICC Sydney Station
UTS ⇔ Airport Taxi: 30 mins Train: T2 24mins
Central Station⇔International Airport
ICC Sydney ⇔ Airport Taxi: 30 mins Train: T2 35mins
Museum Station ⇔ International Airport
vi
ICE
MS
2017
Pro
gram
Ou
tlin
e
Con
fere
nce
Ven
ue:
In
tern
atio
nal C
onve
ntio
n C
entr
e (I
CC
), S
ydne
y W
elco
me
Rec
epti
on –
Bui
ldin
g 11
, Bro
adw
ay C
ampu
s U
nive
rsit
y of
Tec
hnol
ogy
Syd
ney
(B11
, UT
S)
Ope
ning
Cer
emon
y, P
lena
ry O
ral S
essi
ons,
Pos
ter
Ses
sion
s, S
pons
ors’
Wor
ksho
ps, a
nd C
losi
ng C
erem
ony
– C
ockl
e B
ay R
oom
s, I
CC
, Syd
ney
Tim
e F
rida
y 11
Aug
ust 2
017
Sat
urda
y 12
Aug
ust 2
017
Sun
day
13
Aug
ust 2
017
Mon
day
14 A
ugus
t 201
7 8:
00
Reg
istr
atio
n D
esk
Ope
n R
egis
trat
ion
Des
k O
pen
Reg
istr
atio
n D
esk
Ope
n 9:
00
Ope
ning
Cer
emon
y P
lena
ry S
essi
on
(Coc
kle
Bay
Rm
2, I
CC
) P
lena
ry S
essi
on
(Coc
kle
Bay
Rm
2, I
CC
) 9:
40
Ple
nary
Ses
sion
(C
ockl
e B
ay R
m 2
, IC
C)
11:0
0 M
orni
ng T
ea B
reak
M
orni
ng T
ea B
reak
M
orni
ng T
ea B
reak
11:1
5 O
ral S
essi
ons
(Coc
kle
Bay
R
m 2
, C3.
1-3.
5)
Pos
ter
Ses
sion
s (C
ockl
e B
ay R
m 1
, IC
C)
Ora
l Ses
sion
s (C
ockl
e B
ay
Rm
2, C
3.1-
3.5)
Pos
ter
Ses
sion
s (C
ockl
e B
ay R
m 1
, IC
C)
Ora
l Ses
sion
s (C
ockl
e B
ay
Rm
2, C
3.1-
3.5)
Pos
ter
Ses
sion
s (C
ockl
e B
ay R
m 1
, IC
C)
12:4
5 L
unch
L
unch
L
unch
13
:00
Reg
istr
atio
n D
esk
Ope
n (C
B11
.02)
13
:45
Ora
l Ses
sion
s (C
ockl
e B
ay
Rm
2, C
3.1-
3.5)
Pos
ter
Ses
sion
s (C
ockl
e B
ay R
m 1
, IC
C)
Ora
l Ses
sion
s (C
ockl
e B
ay
Rm
2, C
3.1-
3.5)
Pos
ter
Ses
sion
s (C
ockl
e B
ay R
m 1
, IC
C)
Ora
l Ses
sion
s (C
ockl
e B
ay
Rm
2, C
3.1-
3.5)
Pos
ter
Ses
sion
s (C
ockl
e B
ay R
m 1
, IC
C)
14:0
0 T
utor
ial
Ses
sion
1A
(C
B11
.04.
400)
Tut
oria
l S
essi
on 1
B
(CB
11.0
3.30
1)
15:1
5 A
fter
noon
Tea
Bre
ak
Aft
erno
on T
ea B
reak
A
fter
noon
Tea
Bre
ak
15:3
0 O
ral S
essi
ons
(Coc
kle
Bay
R
m 2
, C3.
1-3.
5)
Pos
ter
Ses
sion
s (C
ockl
e B
ay R
m 1
, IC
C)
Ora
l Ses
sion
s (C
ockl
e B
ay
Rm
2, C
3.1-
3.5)
Pos
ter
Ses
sion
s (C
ockl
e B
ay R
m 1
, IC
C)
Ora
l Ses
sion
s (C
ockl
e B
ay
Rm
2, C
3.1-
3.5)
Pos
ter
Ses
sion
s (C
ockl
e B
ay R
m 1
, IC
C)
17:0
0
17:3
0 B
reak
B
reak
B
reak
C
losi
ng C
erem
ony
(Coc
kle
Bay
Rm
2, I
CC
)18
:00-
20:0
0 W
elco
me
Rec
epti
on
(CB
11.0
3.30
1)
ISC
Mee
ting
C
onfe
renc
e D
inne
r (P
arks
ide
1, I
CC
)
20:0
0-21
:00
IS
C D
inne
r
vii
ICEMS2017 Program
Registration .......................................................................................................................................... 1
Tutorial Sessions .................................................................................................................................. 1
Session 1A ......................................................................................................................................... 1
Session 1B ......................................................................................................................................... 1
Welcome Reception .............................................................................................................................. 1
Registration .......................................................................................................................................... 1
Opening Ceremony .............................................................................................................................. 1
Session 2: Plenary Sessions ................................................................................................................. 1
Morning Tea Break .............................................................................................................................. 2
Oral Sessions (3A – 3E) ....................................................................................................................... 2
Session 3A: Reluctance and Non-Rare-Earth Permanent Magnet Synchronous Machines and Control .............................................................................................................................................. 2
Session 3B: Switched Reluctance Motor ........................................................................................ 2
Session 3C: Flux Switching Machine (A) ....................................................................................... 3
Session 3D: Power Electronics in Power Systems ......................................................................... 3
Session 3E: Magnetics and Applications ........................................................................................ 4
Poster Sessions (3F – 3J) ...................................................................................................................... 4
Session 3F: Fault Detection and Tolerant Operation in Machines (A) ....................................... 4
Session 3G: Fault Detection and Tolerant Operation in Machines (B) ...................................... 5
Session 3H: Sensored and Sensorless Control of Electric Machines (A) .................................... 5
Session 3I: Motor Drives (A) ........................................................................................................... 6
Session 3J: Energy Storage ............................................................................................................. 7
Lunch Break ......................................................................................................................................... 7
Oral Sessions (4A – 4E) ....................................................................................................................... 8
Session 4A: Electric Machines Analysis and Design ..................................................................... 8
Session 4B: Brushless Motors ......................................................................................................... 8
Session 4C: Fault Detection and Tolerant Operation in Machines (C) ...................................... 8
Session 4D: High Power Converters (A) ........................................................................................ 9
Session 4E: Wind Farm and Power Plant ...................................................................................... 9
Poster Sessions (4F – 4J) .................................................................................................................... 10
Session 4F: Sensored and Sensorless Control of Electric Machines (B) ................................... 10
Session 4G: Control in Electric Machines (A) ............................................................................. 11
Session 4H: Brushless Machines ................................................................................................... 11
Session 4I: Motor Drives (B) ......................................................................................................... 12
Session 4J: Planning, Operation and Energy Markets ............................................................... 13
viii
Afternoon Tea Break ......................................................................................................................... 13
Oral Sessions (5A – 5E) ..................................................................................................................... 13
Session 5A: Permanent Magnet Machines .................................................................................. 13
Session 5B: Surface mounted Permanent Magnet Machines .................................................... 14
Session 5C: Electric Machines in Electric Vehicles (A) .............................................................. 14
Session 5D: Motor Drives (C) ....................................................................................................... 15
Session 5E: Energy Storage Systems ............................................................................................ 15
Poster Sessions (5F – 5J) .................................................................................................................... 16
Session 5F: Control in Electric Machines (B) .............................................................................. 16
Session 5G: Switched Reluctance Machines ................................................................................ 17
Session 5H: Flux Switching Machines (B) ................................................................................... 17
Session 5I: Wireless Power Transfer (A) ..................................................................................... 18
Session 5J: Fault diagnosis and Testing ....................................................................................... 18
ISC Meeting ........................................................................................................................................ 19
ISC Dinner .......................................................................................................................................... 19
Registration ........................................................................................................................................ 19
Session 6: Plenary Sessions ............................................................................................................... 19
Morning Tea Break ............................................................................................................................ 20
Oral Sessions (7A – 7E) ..................................................................................................................... 20
Session 7A: Electric Machines Analysis and Design (C) ............................................................ 20
Session 7B: Electric Machines in Electric Vehicles (B) .............................................................. 20
Session 7C: Wind Energy Generators .......................................................................................... 21
Session 7D: Discrete and Integrated Semiconductors ................................................................ 21
Session 7E: Modeling and Analysis of Magnetics ....................................................................... 22
Poster Sessions (7F – 7J) .................................................................................................................... 22
Session 7F: Electric Machine Analysis and Design (A) .............................................................. 22
Session 7G: Magnetic Materials for Machines (A) ..................................................................... 23
Session 7H: Magnetic Materials for Machines (B) ..................................................................... 24
Session 7I: Power Electronics for Renewable Energy Systems ................................................. 24
Session 7J: Analysis, Design and Control of Renewable Energy Systems ................................ 25
Lunch Break ....................................................................................................................................... 26
Oral Sessions (8A – 8E) ..................................................................................................................... 26
Session 8A: Control in Electric Machines (C) ............................................................................. 26
Session 8B: Electric Machines for Renewable Energy Generation ........................................... 26
Session 8C: Magnetic Materials for Machines (C) ..................................................................... 27
Session 8D: High Power Converters (B) ...................................................................................... 27
Session 8E: Microgrids (Power System) (A) ................................................................................ 28
ix
Poster Sessions (8F – 8J) .................................................................................................................... 28
Session 8F: Losses and Thermal Management of Electric Machines (A) ................................. 28
Session 8G: Losses and Thermal Management of Electric Machines (B) ................................ 29
Session 8H: Permanent Magnet Synchronous Machines ........................................................... 30
Session 8I: Microgirds (Power Electronics) ................................................................................ 30
Session 8J: Operation of Magnets and Machinery ..................................................................... 31
Afternoon Tea Break ......................................................................................................................... 32
Oral Sessions (9A – 9E) ..................................................................................................................... 32
Session 9A: Magnetic Materials for Machines (D) ..................................................................... 32
Session 9B: Electric Machine Analysis and Design (B) .............................................................. 32
Session 9C: Interior Permanent Magnet Machines .................................................................... 33
Session 9D: Motor Drives (D) ....................................................................................................... 33
Session 9E: Thermal and Mechanical Analysis (A) .................................................................... 34
Poster Sessions (9F – 9J) .................................................................................................................... 34
Session 9F: Optimization of Electric Machines (A) .................................................................... 34
Session 9G: Electric Machine Analysis and Design (C) ............................................................. 35
Session 9H: Electric Machine Analysis and Design (D) ............................................................. 36
Session 9I: DC/DC and AC/DC Converters ................................................................................ 36
Session 9J: Transients and Stability of Power System ............................................................... 37
Conference Dinner ............................................................................................................................. 38
Registration ........................................................................................................................................ 38
Session 10: Plenary Sessions ............................................................................................................. 38
Morning Tea Break ............................................................................................................................ 38
Oral Sessions (11A – 11E) ................................................................................................................. 38
Session 11A: Electric Machines Analysis and Design (D) .......................................................... 38
Session 11B: Control in Electric Machines (D) ........................................................................... 39
Session 11C: Sensored and Sensorless Control of Electric Machines (C) ................................ 39
Session 11D: Motor Drives (E) ...................................................................................................... 40
Session 11E: Applications of Electromagnetism ......................................................................... 40
Poster Sessions (11F – 11J) ................................................................................................................ 40
Session 11F: Electric Machine Analysis and Design (E) ............................................................ 40
Session 11G: Electric Machine Analysis and Design (F) ............................................................ 41
Session 11H: Electric Machine Analysis and Design (G) ........................................................... 42
Session 11I: Inverters, Matrix Converters and Control ............................................................. 43
Session 11J: Renewable Energy Applications ............................................................................. 43
Lunch Break ....................................................................................................................................... 44
Oral Sessions (12A – 12E) ................................................................................................................. 44
x
Session 12A: Linear Machines ...................................................................................................... 44
Session 12B: Losses and Thermal Management of Electric Machines (C) ............................... 45
Session 12C: Optimization of Electric Machines (B) .................................................................. 45
Session 12D: Wireless Power Transfer (B) .................................................................................. 46
Session 12E: Photovoltaics ............................................................................................................ 46
Poster Sessions (12F – 12J) ................................................................................................................ 47
Session 12F: Control in Electric Machines (E) ............................................................................ 47
Session 12G: Control in Electric Machines (F) ........................................................................... 47
Session 12H: Control and Multilevel Inverters ........................................................................... 48
Session 12I: Power Electronics in Power System Applications ................................................. 49
Session 12J: Microgrids (Power System) (B) ............................................................................... 50
Afternoon Tea Break ......................................................................................................................... 50
Oral Sessions (13A – 13E) ................................................................................................................. 51
Session 13A: Microgrids (Power Electronics) ............................................................................. 51
Session 13B: Fault and Protection of Power System .................................................................. 51
Session 13C: Microgrids (Power System) (C) ............................................................................. 52
Session 13D: Renewable Energies ................................................................................................ 52
Session 13E: Online monitoring, Measurement and Analysis ................................................... 52
Poster Sessions (13F – 13J) ................................................................................................................ 53
Session 13F: Converters, Control and Applications ................................................................... 53
Session 13G: Cables, Transformers and Transmission in Power System ................................ 54
Session 13H: Electrical Systems Studies ...................................................................................... 54
Session 13I: Thermal and Mechanical Analysis (B) ................................................................... 55
Session 13J: Electric Machines Applications .............................................................................. 56
Closing Ceremony .............................................................................................................................. 56
1
Technical Program
Friday 11 August 2017
Registration
13:00 – 20:00 Location: Main entrance of UTS Building 11 (facing Broadway)
Tutorial Sessions
Session 1A 14:00 – 17:00 Location: UTS Building 11 (CB11.04.400) Design, Modelling and Control of Linear Induction Motors (LIM) for Industrial
Applications Prof. Wei Xu, SMIEEE, School of Electrical and Electronics Engineering,
Huazhong University of Science and Technology (HUST), China Dr. Marcello Pucci, Institute of Intelligent Systems for the Automation
(ISSIA), National Research Council of Italy (CNR), Italy Prof. Ion Boldea, Department of Electrical Machines and Drives,
University Politehnica of Timisoara (UPT), Romania
Session 1B 14:00 – 17:00 Location: UTS Building 11 (CB11.03.301) Introduction to Permanent Magnet AC Machines: Principles and Analysis
Associate Professor Wen Soong, Head, School of Electrical and Electronic Engineering, University of Adelaide, South Australia
Welcome Reception
18:00 – 20:00 Location: UTS Building 11 (CB11.03.301)
Saturday 12 August 2017
Registration
08:00 – 17:00 Location: International Convention Centre Sydney, Australia (ICC)
Opening Ceremony
09:00 – 09:40 Location: Cockle Bay Room 2, ICC Welcome from Prof. Jianguo Zhu
Session 2: Plenary Sessions
09:40 – 11:00 Location: Cockle Bay Room 2, ICC Chair: Jianguo Zhu
2
Current Developments and Trends in Permanent Magnet Machines and Drives Professor Z.Q. Zhu
The Return of Current-Source Inverters in Future PM Machine Drives Professor Thomas M. Jahns
Morning Tea Break
11:00 – 11:15 Location: ICC
Oral Sessions (3A – 3E)
Session 3A: Reluctance and Non-Rare-Earth Permanent Magnet Synchronous Machines and Control
11:15 – 12:45 Location: Cockle Bay Room 2, ICC Chairs: Rini Nur Hasanah and Jian-Xin Shen
11:15 – 11:30 Theoretical Analysis of Torque Performance in Permanent Magnetassisted Synchronous Reluctance Motor (ID:793) Feng Chai, Huiying Hu and Lina Geng
11:30 – 11:45 Design and Analysis of Permanent-Magnet Assisted Synchronous Reluctance Motor (ID:789) Thanh Anh Huynh, Min-Fu Hsieh, Kai-Jung Shih and Hsiu-Fu Kuo
11:45 – 12:00 Comparison of End Effect in Series and Parallel Hybrid Permanent Magnet Variable Flux Memory Machines (ID:674) Hao Hua, Z.Q. Zhu, Adam Pride, Rajesh Deodhar and Toshinori Sasaki
12:00 – 12:15 Comparison of a Flux Barrier and a Salient Pole Synchronous Reluctance Machine for High Rotational Speeds in Electric Traction Applications (ID:262) Matthias Hofer and Manfred Schroedl
12:15 – 12:30 Investigation on Torque Ripple of Synchronous Reluctance Machine with Square-Wave Drive (Invited) (ID:332) Jian-Xin Shen, Shun Cai, He Hao and Meng-Jia Jin
Session 3B: Switched Reluctance Motor
11:15 – 12:45 Location: Meeting Room C3.1, ICC Chairs: Chang Eob Kim and Decheng Wang
11:15 – 11:30 Fundamental Output Characteristics of a Claw Pole Type Half-wave Rectified Variable Field Flux Motor (ID:523) Yuta Nakashima, Yuya Eguchi, Takashi Abe and Tsuyoshi Higuchi
11:30 – 11:45 Performance and Design of a Novel Single-Phase Hybrid Switched Reluctance Motor for Hammer Breaker Application (ID:719) Kwang-Il Jeong, Dong-Hee Lee and Jin-Woo Ahn
11:45 – 12:00 An Inductive Position Sensor with Switched Reluctance Motor Structure (ID:841) Jun Cai, Linna Lu, Zeyuan Liu, Hongyun Jia and Xingqiang Zhao
12:00 – 12:15 An ELM Identifier and Inverse Controller Based Algorithm for Dynamic Decoupling Control of Bearingless Switched Reluctance Motor (ID:644) Zhiying Zhu, Qi Wan and Yukun Sun
12:15 – 12:30 Modeling of Switched Reluctance Motor Based on Combined Clustering RBF neural network (ID:080)
3
Suying Zhou 12:30 – 12:45 Torque Ripple Minimization For Switched Reluctance Motor with Predictive
Current Control Method (ID:244) Hui Cai, Mengqiu Li, Hui Wang, Shiqi Shen and Wenbing Wang
Session 3C: Flux Switching Machine (A)
11:15 – 12:45 Location: Meeting Room C3.2, ICC Chairs: Ming Cheng and Ying Fan
11:15 – 11:30 Design of High Speed Permanent Magnet Generator for Solar Co-Generation System Using Motor-CAD (ID:162) Khurram Shahzad, Youguang Guo, Li Li and David Dorrell
11:30 – 11:45 Comparison of Modular Linear Flux-switching Permanent Magnet Motors With Different Mover and Stator Pole Pitch (ID:112) Bangfu Zhang, Ming Cheng, Mingli Zhang, Wei Wang and Yunlei Jiang
11:45 – 12:00 A Novel E-core Hybrid-Excited Flux Switching Machine Based on Biased Flux (ID:466) Jian Li, Guohao Zhang, Chaoqun Ma, Kai Wang, Zhiliang Zhang and Chuang Liu
12:00 – 12:15 Double Stator and Single Rotor Type Single-Phase Flux Switching Axial Flux Permanent Magnet Motor (ID:361) Qurban Ali Shah Syed, Haris Kurtovic and Ingo Hahn
12:15 – 12:30 Investigation on an Arc-Linear Axial Flux Permanent-Magnet Synchronous Machine (ID:256) Jing Zhao, Congcong Zhu, Bin Li, Xiangdong Liu, Zhen Chen and Xuefei Mao
Session 3D: Power Electronics in Power Systems
11:15 – 12:45 Location: Meeting Room C3.4, ICC Chairs: Guoen Cao and Gao Congzhe
11:15 – 11:30 A Power Router based on Modular Multilevel Converter Integrating UltraCapacitor Energy Storage System (ID:171) Yingjie Wu, Congzhe Gao, Xiangdong Liu, Zhen Chen and Xuefei Mao
11:30 – 11:45 Large-Scale Photovoltaic Generation System Connected to HVDC Grid With Centralized High Voltage and High Power DC/DC Converter (ID:527) Xinke Huang
11:45 – 12:00 A DC-DC Conversion System for High Power HVDC-Connected Photovoltaic Power System (Invited) (ID:140) Guoen Cao, Zhicheng Guo, Yibo Wang, Kai Sun and Hee-Jun Kim
12:00 – 12:15 Three-level Dual Active Bridge with auxiliary inductor for Wide Zero Voltage Switching in Energy Storage System (ID:130) Zhiqiang Guo, Kai Sun and Tsai-Fu Wu
12:15 – 12:30 Novel Topology and Control of a Non-isolated Three Port DC-DC Converter for PV-Battery Power System (ID:237) Bowen Zhang, Ping Wang, Taizhou Bei, Xialin Li, Yanbo Che and Gengji Wang
12:30 – 12:45 Hybrid MMC Based on the Asymmetrical Double Commutated Cells and Half-bridge Cells and the DC Fault Clearance Capability (ID:026) Minglin Zhu and Guojie Li
4
Session 3E: Magnetics and Applications
11:15 – 12:45 Location: Meeting Room C3.5, ICC Chairs: Chengcheng Liu and Daming Zhang
11:15 – 11:30 Fault identification of Active Magnetic Levitation Bearing Displacement Sensor based on LabVIEW (ID:899) Ming Zong and Anqi Zheng
11:30 – 11:45 Design of a GMR-based magnetic encoder using TLE5012B (ID:394) Feng Jiang, Dezhang Lou, Huan Zhang, Lixun Tang, Songjun Sun and Kai Yang
11:45 – 12:00 Development of A New Standard Model of GIB Using Electromagnetic-Structural Coupled Analysis (ID:385) Chan Park and Taehun Song
12:00 – 12:15 Manufacturing Process of Soft Magnetic Composite Cores for Permanent Magnet Machines (ID:095) Chengcheng Liu, Bo Ma, Gang Lei, Youguang Guo, Youhua Wang and Jianguo Zhu
12:15 – 12:30 Lifetime Evaluation of HV Transformers (ID:913) Ali Khademlahashy, Gaurang Mehta, Li Li and Jianguo Zhu
Poster Sessions (3F – 3J)
Session 3F: Fault Detection and Tolerant Operation in Machines (A)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Youguang Guo
11:15 – 12:45 A New Fault Diagnosis Method for Hall Signals in Brushless DC Motor Drives (ID:189) Qian Zhang and Ming Feng
11:15 – 12:45 Analysis of Stator Faults in Induction Machines using Growing Curvilinear Component Analysis (ID:455) Rahul Kumar, Vincenzo Randazzo, Giansalvo Cirrincione, Maurizio Cirrincione and Eros Pasero
11:15 – 12:45 The Influence Analysis of Different Fault Modes on the Post-Fault Performance of Fault Tolerant Permanent Magnet Synchronous Motor (ID:579) Jinquan Xu, Yang Yuan, Zhihao Zhang and Hong Guo
11:15 – 12:45 Asymmetrical Short-Circuit Response of the Wound Rotor Brushless Doubly-Fed Generator (ID:820) Xi Chen, Xuefan Wang and Zhongchao Wei
11:15 – 12:45 Space Vector PWM of Double Star Winding Shifted by 30° Six-Phase Induction Motor with Stator One-Phase Open-Circuit (ID:315) Zheng Jian, Rong Fei, Gong Xichang, Liu Xiao and He Yigang
11:15 – 12:45 Five phase multi-layer drive with fault tolerant neuro-fuzzy features for safety critical applications (ID:828) Alessio Di Tullio, Marco Tursini, Francesco Parasiliti and Kan Akatsu
11:15 – 12:45 Research on modeling methods of permanent magnet machine winding faults (ID:825) Jian Huang, Wenying Jiang, Yunyi Jiang, Yanwu Xu and Zhuoran Zhang
11:15 – 12:45 Fault-Tolerant Method for Six-Phase PMSM by Adjusting Phase Angle (ID:386) Ting Dong, Fenghui Li and Li Shen
5
11:15 – 12:45 Fault-Tolerance Control Method for Open-Winding Multi-Disc Motor System (ID:163) Huan Zhang, Cheng Luo, Lixun Tang, Guoliang Xiao, Wenyi Tu and Kai Yang
11:15 – 12:45 High-Resistance Connection Fault Severity Detection in a Permanent Magnet Synchronous Machine Drive System (ID:165) Jun Hang, Yuanqi Li, Shichuan Ding, Chunyan Tang and Qunjing Wang
Session 3G: Fault Detection and Tolerant Operation in Machines (B)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Yam Siwakoti
11:15 – 12:45 Virtual Synchronous Control Strategy for Doubly-Fed Induction Generator under Asymmetrical Grid Faults (ID:124) Xuekun Cheng, Xudong Sun, Jianyun Chai and Yangyang Zhao
11:15 – 12:45 A New Detection Method for Broken Rotor Bar Fault in Induction Motors Based on WSF and BBPSO (ID:319) Boqiang Xu, Mingfei Zhu and Liling Sun
11:15 – 12:45 Diagnose and Analysis of Stator Inter-turn Short-circuit Fault in DFIG Considering Control Strategies (ID:120) Junqing Li, Zongyi Tong and Zhonghui Li
11:15 – 12:45 Influence of Inverter Short Circuit Fault on Electromagnetic Field for Permanent Magnet Synchronous Motor (ID:552) Jinyang Li, Lin Li, Weili Li, Yu Wang, Jiafeng Shen, Dong Li, Yu Fan and Purui Wang
11:15 – 12:45 Research on Interturn Short Circuit Fault Location of Rotor Winding in Synchronous Electric Machines (ID:166) Junqing Li, Weiming Shi and Qiujia Li
11:15 – 12:45 Model predictive current control for the semicontrolled open winding PMSG (ID:619) Xiaoguang Zhang and Keqin Wang
11:15 – 12:45 A Simplified Model Predictive Control for Open-Winding PMSM (ID:690) Chong Sun, Dan Sun and Zhihao Zheng
11:15 – 12:45 Study on Overload Performance Enhancement of Motor Based on Heat Storage of Phase Change Paraffin (ID:260) Xiong Bin, Gu Guobiao, Ruan Lin and Li Zhenguo
11:15 – 12:45 Influence of Anti-short-circuit Design on the Performance of Dual-redundancy PMSM (ID:506) Xiaolin Kuang, Hong Guo, Jinquan Xu, Tong Zhou and Guang Yang
11:15 – 12:45 A Comparative Study on Two Outer Rotor PMSMs for In-Wheel Direct Drive under Short-Circuit Faults (ID:010) Dong Yu, Xiaoyan Huang, Jien Ma and Youtong Fang
Session 3H: Sensored and Sensorless Control of Electric Machines (A)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Jiangfeng Zhang
11:15 – 12:45 Rotor Displacement Self-sensing of Permanent Magnet Bias Magnetic Bearings Using three-level Switching Amplifier Power Demodulation (ID:191) Yinxiao Jiang, Kun Wang and Haifeng Zhang
6
11:15 – 12:45 An Improved Position Detection Method for Permanent Magnet Linear Motor Using Linear Hall Sensors (ID:223) Leyang Yan, Peiqing Ye, Chunlei Zhang and Hui Zhang
11:15 – 12:45 Sensorless Control for Flux-Switching Permanent Magnet Machine Based on Sliding Mode Observer (ID:393) Guangkun Lian, Fuchuan Song, Biao Chen and Huitao Li
11:15 – 12:45 Research on Speed Sensorless Method for Permanent Magnet Linear Synchronous Motor Based on High Frequency Pulsating Voltage Signal Injection (ID:498) Meng Zhou, Ruihua Zhang, Yumei Du and Qiongxuan Ge
11:15 – 12:45 SRM mutual inductance sense for improved sensorless control (ID:871) Alex Stumpf, Darrell Elton, Howard Lovatt and John Devlin
11:15 – 12:45 Sensorless Control on Interior Permanent-Magnet Synchronous Motor Drive over Wide Speed Range Operation Based on the Current Derivative Measurements (ID:877) Deqi Guan, Faz Rahman and Dan Xiao
11:15 – 12:45 Parameter Sensitivity of Flux-Linkage based Sensorless Control for Permanent Magnet Synchronous Motors (ID:730) Jørgen Sivertsen Åsrud, Tommy Aas and Huynh Van Khang
11:15 – 12:45 Sensor-less Control of Maglev Permanent Magnet Linear Synchronous Motor based on Sliding Mode Observer (ID:431) Chaochao You, Ruihua Zhang, Yumei Du and Qiongxuan Ge
11:15 – 12:45 Sensorless Direct Power Control for High-speed PMSM Based on High-precision Rotor Position Estimation (ID:025) Xinda Song and Bangcheng Han
11:15 – 12:45 Sensorless Control of Five-phase IPM Motor Based on High-Frequency Sinusoidal Voltage Injection (ID:756) Ying Fan, Rui Wang and Li Zhang
Session 3I: Motor Drives (A)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Tao Wu
11:15 – 12:45 Pulsation Reduction method using notch filter with Pole-Zero cancellation and lead controller in single-inverter-based PMSM parallel operation (ID:154) Joo-Yong Park, Chul Yun, Byung-Keun Yoon, Tae-Ho Oh and Woo-Hyen Kwon
11:15 – 12:45 Parameters self-turning fuzzy control for controllable excitation linear synchronous motor magnetic suspension system (ID:181) Yipeng Lan and Yangyang Huang
11:15 – 12:45 Position sensorless control method of IPMSM applying three shunt sensing PWM inverter using predictive current (ID:484) Il-Kuen Won, Sung-Woo Hong, Kyoung-Min Choo, Woo-Jae Kim, Jun-Chan Kim, Jung-Hyo Lee and Chung-Yuen Won
11:15 – 12:45 A New Hybrid Asymmetric and Buck-Boost Fronted Converter for SRM with Active Boost Voltage Capability (ID:561) Zheng Qu, Huijun Wang, Shaofei Tang, Xinsheng Wei and Qi Chen
11:15 – 12:45 A Novel Reduced-Order Load Torque Observer Based Discrete-Time Sliding Mode Control for PMSM Speed Servo System (ID:023) Changming Zheng, Jiasheng Zhang, Wei Liu, Naigang Zhang and Wei Hua
11:15 – 12:45 High Power Factor Control of Brushless DC Motor Drive System without
7
Electrolytic Capacitor (ID:188) Xiaoyu Jiang, Jianbo Chu and Fan Li
11:15 – 12:45 A Novel Boost Chopper Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors (ID:122) Qingguo Sun, Jianhua Wu, Chun Gan and Jing Wang
11:15 – 12:45 A Study on a Novel Multistage-AFPM with Modular Stator Core Made of Different Materials of Silicon Steel and SMC (ID:219) Songjun Sun, Kai Yang, Chao Suo, Huan Zhang, Feng Jiang and Lixun Tang
11:15 – 12:45 Control and LC Resonance Damping for Multiple-Channel Indirect Matrix Converters Fed Dual Three-phase PMSM Drive (ID:480) Zheng Wang, Yang Xiao, Xiuyun Huang and Ming Cheng
11:15 – 12:45 Small Signal Modeling and Stability Analysis of Virtual Synchronous Generators (ID:283) Changbin Hu, Kaiyu Chen, Bingkai Zhou, Shanna Luo and Li Ding
11:15 – 12:45 Low Carrier Ratio Control for Dual Stator-Winding Induction Generator with Selective Harmonic Elimination Pulsewidth Modulation (ID:198) Yu Zhang, Wenxin Huang and Shenglun Zhuang
Session 3J: Energy Storage
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Dylan Lu
11:15 – 12:45 Experimental Application of Least-Squares Technique for Estimation of Double Layer Super Capacitor Parameters (ID:453) Nayzel Jannif, Giansalvo Cirrincione and Gianpaolo Vitale
11:15 – 12:45 A battery storage control scheme for AC microgrids (ID:879) Dmitry Semënov, Galina Mirzaeva, Christopher Townsend and Graham Goodwin
11:15 – 12:45 Research on Hybrid Energy Storage Configuration in Industrial estate (ID:544) Gongxiang Lv, Ling Wei, Wei Li, Shouzhen Zhu and Jinghong Zheng
11:15 – 12:45 An Optimal Frequency Division Control for Hybrid Energy Storage (ID:222) Aimeng Wang, Pudong Huang and Jianguo Zhu
11:15 – 12:45 Analysis on Impact of High Energy-consuming Enterprise in Exploitation of Renewable Energy (ID:015) Zhiwei Wen and Guobiao Gu
11:15 – 12:45 Design Techniques of Distributed Photovoltaic/Energy Storage System (ID:629) Zilong Yang, Lilong Guo, Yuanyuan Chen and Yibo Wang
11:15 – 12:45 Study on utilization of EV as storage battery (ID:814) Kazuho Hasegawa, Kazuto Yukita, Toshirou Matsumura and Yasuyuki Goto
11:15 – 12:45 Considerations for Sizing Energy Storage Technologies in Wave Energy Systems (ID:734) Eric Wu and Andrew Knight
11:15 – 12:45 State of Charge Estimation of Lead-carbon Batteries in Actual engineering (ID:503) Yuanyuan Chen, Zilong Yang, Yibo Wang, Lidong Guo and Xinke Huang
Lunch Break
12:45 – 13:45 Location: ICC
8
Oral Sessions (4A – 4E)
Session 4A: Electric Machines Analysis and Design
13:45 – 15:15 Location: Cockle Bay Room 2, ICC Chairs: Bi Chao and Lihua Zhu
13:45 – 14:00 The Study of Highly Demagnetization Performance IPMSM (Interior Permanent Magnet Synchronous Motor) under Hot Environments (ID:868) Noriyoshi Nishiyama, Hiroki Uemura and Yukio Honda
14:00 – 14:15 Comparative Study of Magnetic Gearing Effect in Integral Slot, Fractional Slot and Vernier PM Machines (ID:667) Yue Liu and Z.Q. Zhu
14:15 – 14:30 A Novel Flat Linear Switched Reluctance Motor with Doubly-excited Windings (ID:698) Liang Yan, Chao Li and Zongxia Jiao
14:30 – 14:45 Calculation of Core Losses Under DC Bias and Harmonics Based On Jiles–Atherton Dynamic Hysteresis Model Combined with Finite Element Analysis (ID:192) Yang Li, Lihua Zhu and Jianguo Zhu
14:45 – 15:00 A Dynamical Selective Harmonic Elimination for the Electrically Excited Synchronous Machines with a low switching frequency (ID:167) Qing-Qing Yuan, Wen-Qian Yin, Long-Yin Li and Chao Bi
Session 4B: Brushless Motors
13:45 – 15:15 Location: Meeting Room C3.1, ICC Chairs: Jin Woo Ahn and Zhiqiang Guo
13:45 – 14:00 A Novel Speed-Power Control Scheme of a High Speed BLDC Motor for a Blender Machine (ID:329) Dong-Hee Lee, Jongnam Bae, Yeongjun Jo and Jin-Woo Ahn
14:00 – 14:15 Parameter Matching and Structure Optimal Design of a Brushless DC Motor for a Battery Electric Vehicle (ID:436) Zhou Shi, Xiaodong Sun, Chen Long, Zebin Yang, Ke Li, Jianguo Zhu and Youguang Guo
14:15 – 14:30 Analytical Calculation and Analysis of Electromagnetic Torque for a Skewed Brushless DC Motor with Halbach Array (ID:212) Likun Xue, Ling Luo and Yan Gu
14:30 – 14:45 Speed-Torque Characteristics of Brushless DC Motor Based on Average Back EMF During Conduction Area (ID:144) Hongsheng Hou and Ruiqing Ma
14:45 – 15:00 Research and Design of Speed Control for High Speed Sensorless Brushless DC Motor with Commutation Compensation (ID:149) Guoliang Xiao, Kai Yang, Wenyi Tu, Chao Suo and Lixun Tang
Session 4C: Fault Detection and Tolerant Operation in Machines (C)
13:45 – 15:15 Location: Meeting Room C3.2, ICC Chairs: Matthias Hofer and Xiaoyan Huang
13:45 – 14:00 Bearing Fault Detection for Drivetrains using Adaptive Filters based Wavelet
9
Transform (ID:041) Asadullah Jacop, Van Khang Huynh, Kjell Gunnar Robbersmyr and Antonio J. Marques Cardoso
14:00 – 14:15 Novel Fault-Tolerant Stator Structure for Modular PMSMs with Fractional-Slot Overlapping Winding (ID:200) Keyi Wang, Heyun Lin, Hui Yang, Dong Wang, Shuhua Fang and Yunkai Huang
14:15 – 14:30 A two-stage detection and fault classification for electric pitch drives in offshore wind farms using support vector machine (ID:491) Surya Kandukuri, Jagath Srilal Senanayaka, Van Khang Huynh and Kjell G. Robbersmyr
14:30 – 14:45 Realistic and Very Fast Simulation of Electric Machines and Apparatus by using Massively Parallel Processing (ID:396) Kazuki Semba, Hirokatsu Katagiri, Tatsuya Asanuma, Masahiko Miwa, Hiroyuki Sano and Takashi Yamada
14:45 – 15:00 Detection of rotor broken bar fault of asynchronous motor based on Duffing and PSO algorithm (ID:918) Boqiang Xu, Zhiyuan Wang and Liling Sun
Session 4D: High Power Converters (A)
13:45 – 15:15 Location: Meeting Room C3.4, ICC Chairs: Guoen Cao and Ningyi Dai
13:45 – 14:00 A PI Controller with Current Feedforward to Improve the Steady-State Error Performance for a Current Controlled Direct Matrix Converter (ID:064) Jianwei Zhang, Li Li, David Dorrell and Youguang Guo
14:00 – 14:15 Space Vector Modulation based Proportional Resonant Current Controller with Selective Harmonics Compensation for Matrix Converter Systems (ID:062) Jianwei Zhang, Li Li, David Dorrell and Youguang Guo
14:15 – 14:30 Startup Strategy with Constant Peak Transformer Current for Hybrid Multilevel Energy Router (ID:291) Jianning Sun, Liqiang Yuan, Qing Gu and Zhengming Zhao
14:30 – 14:45 PET Applicable to 3-Phase Medium-Voltage AC Grid with DC Bus Self-Balancing Capacity (ID:524) You Wang, Zedong Zheng and Yongdong Li
14:45 – 15:00 Hybrid Railway Power Conditioner Based on Chopper Cell Modular Multilevel Converter with Four Legs (ID:065) Li Liu, Ningyi Dai and Zeng Xiang
15:00 – 15:15 Model Predictive Control Applied to a Single Phase Seven-Level Active Rectifier (ID:700) Shakil Ahamed Khan, Youguang Guo and Jianguo Zhu
Session 4E: Wind Farm and Power Plant
13:45 – 15:15 Location: Meeting Room C3.5, ICC Chairs: Huang Shoudao and Fujio Tatsuta
13:45 – 14:00 Simulation of a Large-Scale Wind Farm Consisting of Series-Connected Wind Generators when Considering Wind Speed Distribution (ID:434) Shota Konomi, Fujio Tatsuta and Shoji Nishikata
14:00 – 14:15 Reactive Power Coordinated Control Scheme of Double Fed Wind Farm under
10
Grid Fault (ID:126) Liling Sun, Nana Meng and Boqiang Xu
14:15 – 14:30 Frequency Control of Power System with Solar and Wind Power Stations Installed by Flow Control of HVDC Interconnection Line (ID:621) Kimiko Tada, Atsushi Umemura, Rion Takahashi, Junji Tamura, Yoshiharu Matsumura, Daisuke Yamaguchi, Hirooki Kudo, Masakazu Niiyama and Yasuhito Taki
14:30 – 14:45 Hybrid Power Plant Offering Strategy to Deal with the Stochastic Nature and Outage of Wind Generators (ID:414) Sahand Ghavidel, Mostafa Barani, Ali Azizivahed, Mojtaba Jabbari Ghadi, Li Li and Jiangfeng Zhang
14:45 – 15:00 Coordinated Power Dispatch of a DFIG based Wind Farm for Output Power Maximizing Considering Wakes and Electrical Loss (ID:735) Baohua Zhang, Weihao Hu and Zhe Chen
15:00 – 15:15 Analysis for sub-synchronous control interaction based on impedance model (ID:548) Chai Zhaosen, Li Hui and Hu Yaogang
Poster Sessions (4F – 4J)
Session 4F: Sensored and Sensorless Control of Electric Machines (B)
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Shuhong Wang
13:45 – 15:15 A Novel Rotor Position Detection Method of PMSM Based on MEMS Inertial Sensor (ID:040) Xiaokang Zhang, Zhaoyang Fu and Jinglin Liu
13:45 – 15:15 Speed Observer Based on Second-order Sliding Mode with the adaptive resistance for a Bearingless Induction Motor (ID:450) Weiming Sun, Zebin Yang, Xiaodong Sun and Dan Zhang
13:45 – 15:15 A Design of Sensorless Permanent Magnet Synchronous Motor Drive Based on V/f Control (ID:156) Wenyi Tu, Guoliang Xiao, Chao Suo and Kai Yang
13:45 – 15:15 A Novel Control Strategy for Electrolytic Capacitor-Less PMSM Drives System (ID:805) Chao Zhang, Hao Xu, Xiaoyong Zhu, Li Quan, Yi Du and Zixuan Xiang
13:45 – 15:15 Model Predictive Direct Power Control of Doubly Fed Induction Generator Under Unbalanced Grid Voltages (ID:826) Yongchang Zhang and Donglin Xu
13:45 – 15:15 A Novel Method for Improving Utilization Ratio of Power Supply Used in Variable Frequency Controlling System of PMSM (ID:855) Jiaxin Chen, Dayong Yang, Jinghui Kong, Youguang Guo and Jianguo Zhu
13:45 – 15:15 Control System and Simulation of Arc-Linear Permanent-Magnet Synchronous Machine with Compensation Windings (ID:648) Zhen Chen, Hui Zhao, Jing Zhao, Xiangdong Liu and Zhen Li
13:45 – 15:15 A Novel Combined Magnetic Encoder for External Rotor Motor Based on AS5304 and SG211V (ID:216) Lixun Tang, Huan Zhang, Chao Suo, Songjun Sun, Feng Jiang and Kai Yang
13:45 – 15:15 Comparative Research of Two Fluxweakening Method of PMSMs in High Speed Range (ID:421)
11
Yuan Xu, Wei Zhang and Dan Sun 13:45 – 15:15 Design of Integral Sliding Mode Controller for Flux-Weakening Control of
PMSM based on Single-Current Regulation (ID:588) Yu Cao and Song Chi
Session 4G: Control in Electric Machines (A)
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Ha Pham
13:45 – 15:15 Cloud Based Real-time Monitoring and Control of Diesel Generator using the IoT Technology (ID:428) Abel Chandra and Nayzel Jannif
13:45 – 15:15 Research on Two-Degree-of-Freedom PID Controller of Permanent Magnet Synchronous Motor Based on Fuzzy Inference (ID:492) Ning Dong, Xiaoyuan Li and Zhen Chen
13:45 – 15:15 Research on Stress of Magnetically Controlled Saturable Reactor under Practical Working Conditions (ID:595) Yan Rongge Yan Rongge, Liu Huaiwen Liu Huaiwen and Beng Tong Beng Tong
13:45 – 15:15 Finite-Control-Set Model Predictive Direct Torque Control with Extended Set of Voltage Space Vectors (ID:679) Tianshi Wang and Jianguo Zhu
13:45 – 15:15 Voltage Vector Selection Strategy of the DTC for SPMSM Based on Predictive Control (ID:788) Yaohua Li, Yafei Qu, Sen Jiao, Xiangzhen Meng and Haohao Shi
13:45 – 15:15 Design of Three-level Inverter in Permanent Magnet Synchronous Motor System Based on Repetitive Control (ID:151) Chen Yuanxi, Guo Xinhua, Li Shaoling, Fu Jinyuan, Fang Ruiming and Li Zhongshen
13:45 – 15:15 Model Predictive Torque-Vector Control for Four-Switch Three-Phase Inverter-fed PMSM with Capacitor Voltage Offset Suppression (ID:218) Junpan Su and Dan Sun
13:45 – 15:15 A New Slip Compensation Method for Induction Motors Based on Current Vector Decoupling (ID:443) Zeyu Yang, Xue Li, Congcong Zhang and Song Chi
13:45 – 15:15 Design and Comparison of Two Non-Rare-Earth Permanent Magnet Synchronous Reluctance Motors for EV Applications (ID:360) Lingyujin Ge, Xiaoyong Zhu, Wenye Wu, Fangjie Liu and Zixuan Xiang
Session 4H: Brushless Machines
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Wei Xu
13:45 – 15:15 Model Predictive Control of Brushless Doubly Fed Twin Stator Induction Generator: A Model Reduction Approach (ID:746) Xinchi Wei, Jianguo Zhu, Ming Cheng, Haitao Yang and Bo Ma
13:45 – 15:15 Reduction of Slot Harmonics in a Brushless Doubly-Fed Machine by Using the Tooth Notching (ID:424) Fei Xiong, Wei Xu, Yi Liu and Shengfen Xia
13:45 – 15:15 Brushless Doubly Fed Reluctance Machine Parametrisation (ID:474) David Gay, Robert Betz, David Dorrell and Andrew Knight
12
13:45 – 15:15 A New Stator Back Iron Design For Brushless Doubly Fed Machines (ID:627) Salman Abdi Jalebi, Ehsan Abdi Jalebi and Richard McMahon
13:45 – 15:15 Design Study on Novel Three-phase Rotary Transformer Used for Brushless Doubly Fed Induction Generators (ID:635) Hui Zhong, Chao Wu and Yingjie Wang
13:45 – 15:15 A New Optimized Rotor Design for Brushless Doubly Fed Machines (ID:176) Salman Abdi Jalebi, Ehsan Abdi Jalebi, Richard McMahon and Ashknaz Oraee
13:45 – 15:15 Comparison Research of Novel Brushless Hybrid-Excitation Axial Flux Machine (ID:089) Xin Liang, Caiyong Ye, Jiangtao Yang, Shengfen Xia and Wei Xu
13:45 – 15:15 Structural Design and Mechanical Performance Analysis of Dual-Stator Brushless Doubly-Fed Generator (ID:703) Fengge Zhang, Xiaolong Xu and Shi Jin
13:45 – 15:15 Research on Control Strategy of a Novel Axial Doubly Salient Electro-magnetic Machine (ID:892) Aimin Liu, Peng Sun and Jiachuan Lou
13:45 – 15:15 A Study on the Current Minimization for a Low Voltage BLDC Motor (ID:695) Han-Deul Kim, Sung-Ryul Hwang and Pan-Seok Shin
Session 4I: Motor Drives (B)
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Jing Zhao
13:45 – 15:15 Modeling of Electromechanical Actuators Using Multi-body Dynamics (ID:381) Jinhua Du, Kezhi Yang, Deliang Liang and Naming Zhang
13:45 – 15:15 A Novel Third Harmonic Current Injection Method to Optimize the Air-gap Flux for Multiphase Induction Machine (ID:121) Shan He, Jin Huang and Min Kang
13:45 – 15:15 A Simple Duty Cycle Modulated Direct Torque Control for Permanent Magnet Synchronous Motors (ID:146) Feng Niu, Zhenduo Han, Wenjing Xu, Xiaoyan Huang, Jian Zhang, Lijian Wu, Kui Li and Youtong Fang
13:45 – 15:15 Research on the Multilevel-Switching-Linear Hybrid Scheme for PMSM Drives (ID:174) Xi Chen, Congzhe Gao, Xiangdong Liu and Ning Dong
13:45 – 15:15 Control Strategy of DFIG Under Unbalanced Grid Voltage Conditions Based on Complex-Vector-Resonant Regulator (ID:378) Guofeng Yuan, Ruipeng Liang and Xiaojun Hou
13:45 – 15:15 A Study on the Life Cycle Cost Analysis of PWM modules in Auxiliary Power System (ID:529) Kye-Seung Lee, Wan-Il Kim, No-Geon Jung, Young-Choon Kim and Jae-Moon Kim
13:45 – 15:15 Analysis of Failure Code of Auxiliary Power System SIBCOS in 8200 Series Electric Locomotive Using Signal Analyzer (ID:511) Seung-Wook Huh, Whi-Seob Jeong, Young-Tae Ryu, Eun-Jin Choi, Jae-Moon Kim and Nogeon Jung
13:45 – 15:15 Optimal Design of Power Supply System for a Novel Permanent Bistable Electromagnetic Clutch (ID:334) Fan Yang and Chenglin Gu
13
13:45 – 15:15 A 12-Sector Torque Ripple Reduction Method Based on the New Zero Voltage Vectors in Direct Torque Control of BLDCM (ID:131) Shilun Dong, Jianfei Yang, Yiping Dou, Xin Qiu and Fuhong Min
13:45 – 15:15 Inductive Coupling Wireless Power Transfer with LC and LLC resonance operations according to distance between Tx and Rx (ID:048) Byoung-Hee Lee, Hyun-Won Moon and Kang Hyun Yi
13:45 – 15:15 An Improved Control Strategy Based on the Duty Ratio Modulation to Reduce the Torque Ripple in Direct Torque Control of BLDCM (ID:132) Wei Cao, Jianfei Yang, Yiping Dou, Minqiang Hu, Xin Qiu and Fuhong Min
13:45 – 15:15 A Modified General Model for SiC Power MOSFET in Rail Transportation Application (ID:400) Zhida Zhou, Qiongxuan Ge, Lu Zhao and Bo Yang
Session 4J: Planning, Operation and Energy Markets
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Li Li
13:45 – 15:15 Managing Cumulative Distribution Function of The profit: a Producer Risk Management Case (ID:791) Mohammad Hossein Abbasi, Mehrdad Taki, Amin Rajabi and Li Li
13:45 – 15:15 Study on Regulatory Position Commercial Grade Item Dedication for Digital Electrical Appliances in Nuclear Power Plant (ID:432) Sang-Hwa Lee, Hong-Seok Jang and Young-Sik Cho
13:45 – 15:15 Issues on Load Shedding in a Microgrid Operated At Constant Frequency (ID:297) Daming Zhang
13:45 – 15:15 Study on the Improvement of Power Utilization Efficiency of Industrial Consumers using Small Scale Microgrid (ID:195) Cherl-Jin Kim, Hong-Soon Chang, Sang-Won Park and Heung-Kyo Shin
13:45 – 15:15 A Novel Method for Optimizing Distributed Generation in Distribution Networks Using the Game Theory (ID:907) Arash Beiranvand, Mohammad Abuhilaleh and Li Li
13:45 – 15:15 Fractional-order Analysis Model and Control of Chaotic Oscillation in a 4D Power System Including Synchronous Generator Exciter (ID:005) Fuhong Min, Yaoda Wang, Yiping Dou, Jianfei Yang and Xin Qiu
Afternoon Tea Break
15:15 – 15:30 Location: ICC
Oral Sessions (5A – 5E)
Session 5A: Permanent Magnet Machines
15:30 – 17:00 Location: Cockle Bay Room 2, ICC Chairs: Mingyao Lin and Tomoyuki Shimono
15:30 – 15:45 Fault Tolerant Control of Axial Field Flux-Switching Fault Tolerant Machine Under Single-Phase Faults (ID:591) Weigang Gu, Mingyao Lin and Wei Zhang
14
15:45 – 16:00 Comparative Study of Flux-regulation method for Stator Permanent magnet memory machine (ID:241) Gongde Yang, Mingyao Lin, Nian Li and Guangying Tan
16:00 – 16:15 Sliding Mode Control of Axial Field Flux-Switching Permanent Magnet Machine (ID:235) Xiaoqiang Yuan, Wei Zhang, Feng Yu and Weigang Gu
16:15 – 16:30 Field-Weakening Performance of Permanent Magnet Memory Machines (ID:798) Nian Li, Jianguo Zhu, Mingyao Lin, Gongde Yang and Yong Kong
16:30 – 16:45 Comparison of Two Control Methods for Axial Field Flux-Switching Permanent Magnet Motor (ID:233) Wenlin Wang, Wei Zhang, Yi Yang and Weigang Gu
16:45 – 17:00 Static Characteristics of a Dual-Rotor Axial Field Flux-Switching Permanent Magnet Machine (Invited) (ID:824) Li Hao, Mingyao Lin, Nian Li and Da Xu
Session 5B: Surface mounted Permanent Magnet Machines
15:30 – 17:00 Meeting Room C3.1, ICC Chairs: Volodymyr Bilyi and Hongsheng Hou
15:30 – 15:45 Enhanced ride performance of electric vehicle suspension system based on genetic algorithm optimization (ID:494) Xinxin Shao, Fazel Naghdy and Haiping Du
15:45 – 16:00 Parameter Analysis of a new Axial Flux Interior Permanent Magnet Machine for Electric Vehicle Application (ID:094) Chengcheng Liu, Bo Ma, Gang Lei, Youguang Guo, Youhua Wang and Jianguo Zhu
16:00 – 16:15 Analytical Modeling of Air-Gap Flux Density for Surface Mounted Permanent Magnet Machines with Isodiametric Magnetic Pole (ID:074) Yujing Guo, Ping Jin, Shanshan Hou, Yu Fu, Qingqing Cai and Siman Zhou
16:15 – 16:30 An Improved Off-line Identification Technology for Parameters of Surface Permanent Magnet Synchronous Motors (ID:344) Hu Zhang, Wensheng Wu and Lin Wang
16:30 – 16:45 Investigation on surface mounted PM machines with magnet recycling concept for hybrid electrical vehicle applications (ID:772) Ziwei Li, Afef Lebouc, Radu Fratila, Jerome Legranger, Jean-Marc Dubus and Awais Ikram
Session 5C: Electric Machines in Electric Vehicles (A)
15:30 – 17:00 Meeting Room C3.2, ICC Chairs: Hugh Torresan and Shuhong Wang
15:30 – 15:45 Improved Analytical Model of a Dual-Rotor Permanent Magnet Reluctance Machine Based on Magnetic Networks (ID:382) Jinhua Du, Yuntian Xue, Quanwei Liu and Shuhong Wang
15:45 – 16:00 A Segmented Rotor Type Switched Reluctance Machine for BSGs of Hybrid Electric Vehicles: Concept, Design and Analysis (ID:356) Zhuicai Zhou, Xiaodong Sun, Long Chen, Zebing Yang, Shouyi Han, Ke Li, Jianguo Zhu and Youguang Guo
16:00 – 16:15 Efficiency Optimization Control of Permanent Magnet Synchronous Motor
15
System with SiC MOSFETs for Electric Vehicles (ID:134) Qignbo Guo, Chengming Zhang, Liyi Li, Mingyi Wang and Tiecheng Wang
16:15 – 16:30 Design Method on Induction Motor of Electric Vehicle for Maintaining Torque Performance at Field Weakening Region (ID:823) Sanghyeok Seo, Gyeong-Jae Park, Yong-Jae Kim and Sang-Yong Jung
16:30 – 16:45 Field-Circuit Coupled Design and Analysis for Permanent Magnet Synchronous Motor System Used in Electric Vehicles (ID:088) Jing Wang, Jianhua Wu, Qingguo Sun, Chun Gan and Yicheng Zheng
Session 5D: Motor Drives (C)
15:30 – 17:00 Location: Meeting Room C3.4, ICC Chairs: Rakib Islam and Guangtong Ma
15:30 – 15:45 Torque ripple minimization of an IPMSG with Fractional-Slot, Concentrated-Winding using Uncontrolled Rectifier-connected Boost Converter Control (ID:413) R.M.Hansika Madhavi Rathnayake, Rukmi Dutta, John E. Fletcher and Dan Xiao
15:45 – 16:00 Moving Average Filter-Based Model Predictive Control for Electric Vehicles Bidirectional Power Flow (ID:663) Tingting He, Jianguo Zhu, Dylan Lu and Linfeng Zheng
16:00 – 16:15 Direct Torque Control with a Modified Switching Table for a Direct Matrix Converter based AC Motor Drive System (ID:063) Jianwei Zhang, Li Li, David Dorrell and Youguang Guo
16:15 – 16:30 Highly Integrated Bidirectional Vehicle-to-Grid (V2G) System for Electric Vehicles Based on Open Winding Permanent Magnet Synchronous Motor (ID:775) Feilong Zhang, Xiaolin Wang, Qixin Liao and Cong Gu
16:30 – 16:45 Common-Mode Voltage Attenuation of an Active Common-Mode Filter in a Motor Drive System Fed by a PWM Inverter (ID:659) Shotaro Takahashi, Satoshi Ogasawara, Masatsugu Takemoto, Koji Orikawa and Michio Tamate
16:45 – 17:00 Impact of PWM Switching Frequency on the Radiated Acoustic Noise from a Traction Motor (ID:406) Hanna Amlinger, Ines Lopez Arteaga and Siv Leth
Session 5E: Energy Storage Systems
15:30 – 17:00 Location: Meeting Room C3.5, ICC Chairs: Quan Jiang and Jian Xun Jin
15:30 – 15:45 A Multifunctional Interface circuit for Battery-Ultracapacitor Hybrid Energy Storage System (ID:401) Shichuan Ding, Baolei Wei, Jun Hang, Peng Zhang and Min Ding
15:45 – 16:00 Experimental Analysis and Modeling of Temperature Dependence of Lithium-Ion Battery Direct Current Resistance for Power Capability Prediction (ID:737) Linfeng Zheng, Jianguo Zhu, Guoxiu Wang, Dylan Lu, Peter Mclean and Tingting He
16:00 – 16:15 Investigation and comparison of the Integration of Flywheel Energy Storage Systems (FESS) in Hybrid Electric (HEV) and Electric Vehicles (EV) using Bond-Graphs (ID:362)
16
Abdollah Ebadi and Jinchen Ji 16:15 – 16:30 Study on Equalizer and Equilibrium Strategy of Battery (ID:305)
Yufei Dou and Xuan Zhang 16:30 – 16:45 Verification of charge and discharge system composed of multiple lithium ion
batteries (ID:457) Nobuo Satoh, Atsushi Kosugi, Hiroshi Arai and Masato Uchida
16:45 – 17:00 Analysis and Simulation on Active Damping Control of Resonance in Multi-parallel Grid-Connected Inverters System (Invited) (ID:078) Zhengrong Li, Kun Xia, Quan Jiang, Yiming Wang and Po Xu
Poster Sessions (5F – 5J)
Session 5F: Control in Electric Machines (B)
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Jia Xin Chen
15:30 – 17:00 Force ripples suppression of Tubular Transverse-Flux and Flux-Reversal Linear Permanent Magnet Motor based on ADRC (ID:197) Qi Wang, Wenxin Huang and Dingfeng Dong
15:30 – 17:00 Comparison of Switched-Mode Rectifier and Inverter Control of Surface PM Generators (ID:851) Lujie Chen and Wen L. Soong
15:30 – 17:00 A Torque-injection-based Method for Stator Temperature Estimation of Direct-Torque-Controlled Permanent Magnet Synchronous Motors (ID:170) Jun Hang, Ye Zhang, Shichuan Ding, Yourui Huang and Qunjing Wang
15:30 – 17:00 Robustness Improvement of Predictive Current Control for PMLSM Integrating Adaptive Internal Model with Time Delay Compensation (ID:391) Yang Rui, Wang Mingyi, Zhang Chengming and Li Liyi
15:30 – 17:00 A Study on Induction Generator Control Methods for Commercial Vehicle based on Slip- and Vector Control (ID:464) Sanghun Lee and Minsuk Sim
15:30 – 17:00 Direct Torque and Flux Control of a Fractional-Slot Concentrated-Winding IPMSM in Deep Flux-Weakening Region (ID:652) Sithumini Ekanayake, Rukmi Dutta, Dan Xiao and Fazlur Rahman
15:30 – 17:00 MRAS Based Parameter Identification and Integration on Deadbeat-Direct Torque and Flux Control (ID:367) Jiawei Sun, Zedong Zheng and Yongdong Li
15:30 – 17:00 Application of μ synthesis to the control of active magnetic bearings with parametric uncertainty (ID:589) Jinxiang Zhou, Shiqiang Zheng and Bangcheng Han
15:30 – 17:00 Emergency Power Control of Diesel Generator for Commercial Building Applied DC Distribution (ID:688) Seok-Jin Hong, Kyung-Min Kang, Seung-Hyun Cho and Chung-Yuen Won
15:30 – 17:00 Integrated Optocoupler Circuit Design in High Voltage Bipolar-CMOS-DMOS Process (ID:616) Chia-Hsin Lee, Yuan-Ta Hsieh, Hann-Huei Tsai and Ying-Zong Juang
15:30 – 17:00 Optimal Design of Cooling System for Water Cooling Motor Used for Mini Electric Vehicle (ID:568) Cuiping Li, Zhengwei Guan, Junhui Li, Bing Zhao and Xiucui Ding
17
Session 5G: Switched Reluctance Machines
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Daohan Wang
15:30 – 17:00 Comparison of Torque Characteristics for a Novel Segmented and a Conventional Switched Reluctance Motors (ID:316) Yichen Shen, Xiaodong Sun, Long Chen, Zebin Yang, Ke Li, Jianguo Zhu and Youguang Guo
15:30 – 17:00 Comparative Study of Wound Field Flux-Switching Machines and Switched Reluctance Machines (ID:375) Guishu Zhao, Wei Hua and Ji Qi
15:30 – 17:00 A Novel Axial-Flux Switched Reluctance Machine with Segmented Stator and Rotor (ID:628) Zhe Pan, Shoujun Song and Ruiqing Ma
15:30 – 17:00 Predicting Eddy Current Loss of Winding in Switched Reluctance Motor (ID:796) Zheng Qu, Huijun Wang, Mingqi Pang and Xinsheng Wei
15:30 – 17:00 Performance Analysis of Segmental Type SRMs for HVAC Application (ID:720) Grace Firsta Lukman, Pham Trung Hieu, Dong-Hee Lee and Jin-Woo Ahn
15:30 – 17:00 Speed Control of Switched Reluctance Drive Systems Based on Correlative Angle Switching Technique for Traction Applications (ID:408) Essam Eddin Rashad, Mohamed El-Nemr and Samer Abohashesh
15:30 – 17:00 Study on efficiency of firing angles of switched reluctance motors (ID:773) Ryosuke Takahashi, Kenji Suzuki and Hideo Dohmeki
15:30 – 17:00 Comparison between Two Combined Star-Delta Configurations on Synchronous Reluctance Motors Performance (ID:079) Mohamed Nabil Fathy Ibrahim, Ayman Abdel-Khalik, Essam Rashad and Peter Sergeant
15:30 – 17:00 Design and Analysis of Reluctance Synchronous Motor with Asymmetric Salient Pole (ID:683) Qian Chen, Guohia Liu, Xun Fan and Lu Liu
Session 5H: Flux Switching Machines (B)
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Wei Xu
15:30 – 17:00 Direct Thrust Control of Complementary and Modular Linear Flux-switching Permanent Magnet Motor (ID:844) Liqi Zhang, Ruiwu Cao and Ning Jiang
15:30 – 17:00 Design and Comparison of Two Types of Flux-switching Permanent Magnet Machines with Different Stator Topologies (ID:608) Chen Yunyun, Ding Yun, Quan Li, Zhu Xiaoyong and Xiang Zixuan
15:30 – 17:00 Unity Power Factor Control of Hybrid Excited Axial Field Flux-Switching Permanent Magnet Machine (ID:398) Jilong Zhao, Mengdie Jing, Xiangdong Sun and Nian Li
15:30 – 17:00 Field-Oriented Vector Control System on Flux-Switching Permanent Magnet Machines (ID:502) Huitao Li, Guangkun Lian, Biao Chen and Guobiao Gu
15:30 – 17:00 Speed Control of Double-sided Linear Flux-Switching Permanent Magnet Motor System for Electromagnetic Launch System (ID:728)
18
Zheng Zhang, Ruiwu Cao, Minghang Lu and Yi Jin 15:30 – 17:00 A Study on the Iron Losses in Flux-Switching Permanent Magnet Machines
(ID:016) Heung-Kyo Shin, Tae Heoung Kim and Cherl-Jin Kim
15:30 – 17:00 Flux Switching Machines: A Review on Design and Applications (ID:761) Nuwantha Fernando, Inam Ullah Nutkani, Subrato Saha and Mehdi Niakinezhad
15:30 – 17:00 Research on Fast Design of Key Variables of Bearingless Flux-switching Motor Based on Variable Structure Magnetic Network (ID:190) Fei Fang and Yangzhong Zhou
15:30 – 17:00 An investigation of a Linear Flux Switching Machine with Tapered Ferromagnetic Poles (ID:227) Ahmed Almoraya, Nick Baker, Kristopher Smith and Mohammd Abdul Hakim Raihan
15:30 – 17:00 Design of a Double-Stator Hybrid Flux Switching Permanent Magnet Machine for Direct-Drive Robotics (ID:550) Jincheng Yu and Chunhua Liu
Session 5I: Wireless Power Transfer (A)
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Xiangdong Liu
15:30 – 17:00 Optimal Power Transfer with Aluminum Shielding for Wireless Power Transfer Systems (ID:324) Jing Zhou, Yuqing Gao, Chenxi Zhou, Jien Ma, Xiaoyan Huang and Youtong Fang
15:30 – 17:00 Analytic Solution for Transfer Efficiency of Magnetically-Coupled Inductive Wireless Power Transfer System with Constant Power Load (ID:581) Zhihao Zhang, Jinquan Xu, Hao Huang and Hong Guo
15:30 – 17:00 Comparison of Two Structural Magnetic Coils for Wireless Power Transfer (ID:799) Lijiao Gong, Xinheng Li, Yang Li, Hui Li and Honglei Cen
15:30 – 17:00 Misalignment Based Electric Circuit of a Wireless Power Transfer Transformer for Light Rail Transit (ID:668) Joao Victor Pinon Pereira Dias and Masafumi Miyatake
15:30 – 17:00 Study on a High Coupling Coefficient Contactless Transformer for the ICPT System in Railway Transportation (ID:057) Hang Zhang, Yumei Du, Ruihua Zhang and Liming Shi
15:30 – 17:00 Reluctance Circuit Analysis and Structure Optimization of Contactless Transformer with Asymmetrical Windings (ID:056) Luona Xu, Yumei Du and Liming Shi
15:30 – 17:00 Efficiency Analysis of Inductive Coupled Power Transfer with Multi-pickups (ID:103) Facong Zhang, Liming Shi, Zhenggang Yin, Manyi Fan and Longbin Jiang
Session 5J: Fault diagnosis and Testing
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Xuefei Mao
15:30 – 17:00 The Gas Regulator Fault Diagnosis Based on PCA-RBF Neural Network (ID:113)
19
Wang Yahui, Zhang Fucheng and Chen Fangwen 15:30 – 17:00 Detection Method of Low Voltage Series DC Arc based on the Pattern Matching
Algorithm (ID:923) Meng Chen, Xiaoming Liu, Yefei Xu, Hai Chen and Longnv Li
15:30 – 17:00 Fault Detection and Diagnostic Coverage for The Domain Control Units of Vehicle E/E Systems on Functional Safety (ID:631) Kyubong Yeon and Doho Lee
15:30 – 17:00 Development of Image Processing Technique Based System for Measuring the Locus of Spindle Vibration with High Speed (ID:857) Jiaxin Chen, Chenyang Hu, Youguang Guo and Jianguo Zhu
15:30 – 17:00 Alarm Threshold Settings and Field Test of Non-contact MEMS UHVDC Electroscope (ID:909) Weiwei Pan, Yuqun Fang, Tian Wu, Ziheng Pu and Yujiao Zhang
15:30 – 17:00 Development of a Wireless Telemetry-Based Traffic Sensor Technology to Overcome the Lead Cable Breakage in AVC (ID:441) Sang Hyup Lee
15:30 – 17:00 Finite Element Analysis of Positive and Negative Discharge in Atmospheric Air (ID:340) Ho-Young Lee, Suhun Kim and Se-Hee Lee
15:30 – 17:00 Parameter Estimation of Linear Oscillatory Actuator with RLS Method (ID:438) Tao Zhang and Haitao Yu
15:30 – 17:00 Design of a generalised charge-based self-sensing model for quasi-static piezoelectric actuators (ID:702) Louis Masson, Yoan Civet, Yves Perriard and Paolo Germano
ISC Meeting
18:00 – 20:00 Location: TBA
ISC Dinner
20:00 – 21:00 Location: TBA
Sunday 13 August 2017
Registration
08:00 – 17:00 Location: International Convention Centre Sydney, Australia (ICC)
Session 6: Plenary Sessions
09:00 – 11:00 Location: Cockle Bay Room 2, ICC Chair: Thomas Jahns
Recent Development of Switched Reluctance Motors for Hybrid Electrical Vehicles
Professor Akira Chiba Robust Design Optimization for High Quality Production of Electrical Machines
20
and Drive Systems Professor Jian Guo Zhu
Power Electronics in Modern Power Grids Professor Zhengming Zhao
Morning Tea Break
11:00 – 11:15 Location: ICC
Oral Sessions (7A – 7E)
Session 7A: Electric Machines Analysis and Design (C)
11:15 – 12:45 Location: Cockle Bay Room 2, ICC Chairs: Rakib Islam and Zheng Wang
11:15 – 11:30 Stator Design Techniques to Reduce Noise and Vibration in 12-slot/10-pole Permanent Magnet Synchronous Machines (ID:837) Iftekhar Hasan, Yilmaz Sozer, Alejandro Pina Ortega, Rakib Islam, Subhra Paul and Jeff Klass
11:30 – 11:45 Study on Commutation Control Method for Reducing Noise and Vibration in SRM (ID:317) Sungyong Shin, Naoki Kawagoe, Takashi Kosaka and Nobuyuki Matsui
11:45 – 12:00 Monitoring and Damping Unbalanced Magnetic Pull Due to Eccentricity Fault in Induction Machines: A Review (ID:068) Ahmad Salah, Youguang Guo and David Dorrell
12:00 – 12:15 Influence of Slot/Pole Combinations and Magnet Thickness on Unbalanced Magnetic Force in PM Machines with Different Rotor Eccentricity and Magnetization (ID:033) Jie Ma, Z.Q. Zhu and L.J. Wu
12:15 – 12:30 Influence Mechanism on Vibration and Noise of PMSM for Different Structures of Skewed Stator (ID:147) Zexiu Han, Jinglin Liu, Chao Gong and Jiadong Lu
Session 7B: Electric Machines in Electric Vehicles (B)
11:15 – 12:45 Location: Meeting Room C3.1, ICC Chairs: Sang Hyup Lee and Ping Zheng
11:15 – 11:30 Wide Driving Range Realization by Multi-Layer Multi-Phase Motor for Electric Vehicle (ID:769) Shoyama Takumi and Akatsu Kan
11:30 – 11:45 Optimal Rotor Design of Permanent Magnet Synchronous Motor for Electric Vehicle Applications (ID:495) Xinhua Li, Jinchao Liu, Xiaoguang Wang, Jimin Ma and Zheran Li
11:45 – 12:00 Implementation of Motor Control System for Electric Bus based on DSP (ID:859) Xiaojin Men, Youguang Guo, Jianguo Zhu and Gang Wu
12:00 – 12:15 Optimized Structure Design of a Bridge-like Piezoelectric Energy Harvester Based on Finite Element Analysis (ID:501) Tianyun Guo, Zhike Xu, Long Jin and Minqiang Hu
12:15 – 12:30 Studies of High-Frequency Iron Core Loss for Synchronous Electric Machines
21
Used in Electric Vehicles (ID:578) Ruilin Pei, Lubin Zeng, Shuhui Li and Tim Coombs
12:30 – 12:45 Safe turn-off strategy for Electric Drives in EV (ID:672) Aravind Ramesh Chandran, Martin D. Hennen and Antero Arkkio
Session 7C: Wind Energy Generators
11:15 – 12:45 Location: Meeting Room C3.2, ICC Chairs: Guojie Li and Kenichiro Yamashita
11:15 – 11:30 Research on Parallel Stator Winding Open Circuit Faults of Permanent Magnet Wind Turbine (ID:560) Jinyang Li, Weili Li, Zhijuan Zhang, Dong Li, Jiafeng Shen, Weijie Yang and Purui Wang
11:30 – 11:45 Design and Analysis of a Novel Linear Rotary Permanent Magnet Generator for Wind-Wave Combined Power Generation System (ID:264) Xinghe Fu, Jianhao Wang and Mingyao Lin
11:45 – 12:00 Steady-State Characteristics of Self-Excited Synchronous Generators with Damper Windings for Current-Source Type Wind Farm (ID:338) Kenichiro Yamashita and Shoji Nishikata
12:00 – 12:15 Studies on Characteristics of PMSGs Used for Current-Source Type Wind Farm Composed of Series-connected Wind Generators (ID:335) Fujio Tatsuta and Shoji Nishikata
12:15 – 12:30 A Direct Power Control Strategy of Open-Winding Brushless Doubly-Fed Wind Power Generator on Grid and Machine Sides (ID:563) Shi Jin, Mingyang Li, Liancheng Zhu and Fengge Zhang
Session 7D: Discrete and Integrated Semiconductors
11:15 – 12:45 Location: Meeting Room C3.4, ICC Chairs: Xiao Liu and Huang Shoudao
11:15 – 11:30 Comparison of Two Gate Drivers for SiC MOSFETs on Switching Performance and Over Current Protection (ID:518) Jiye Liu, You Wang, Zedong Zheng, Zhong Peng and Yongdong Li
11:30 – 11:45 Implementation of a Phase Shift Full-Bridge Converter for LDC using GaN HEMT (ID:575) Jaegon Yoo, Dong-Myoung Joo, Byoungkuk Lee, Donghee Kim and Jongsoo Kim
11:45 – 12:00 Electro-thermal based junction temperature estimation model and thermal performance analysis for IGBT module (ID:207) Xin Xin, Chengning Zhang and Jing Zhao
12:00 – 12:15 Fuzzy-Based Self-Tuning Model Predictive Direct Power Control of Grid-Connected Power Converters (ID:736) Mahlagha Mahdavi Aghdam, Ricardo P. Aguilera, Li Li and Jianguo Zhu
12:15 – 12:30 An improved MPPT strategy for depression junction temperature fluctuation of IGBT module in doubly FED wind power converter (ID:638) Hui Li, Pengfei Bai, Yaogang Hu, Haitao Liu, Yang Li and Zhangjian Huang
12:30 – 12:45 Decoupling Control Strategy of Series-Connected DC-DC Boost Converter for HVDC-connected Photovoltaic Unit (ID:606) Changbin Ju, Huan Wang, Runbiao Liu, Xinke Huang, Shanshan Meng and Yibo Wang
22
Session 7E: Modeling and Analysis of Magnetics
11:15 – 12:45 Location: Meeting Room C3.5, ICC Chairs: Jun Cai and Johannes Wagner
11:15 – 11:30 The Engineering Design and Magnetic-thermal Coupled Analysis of Phase-shifting Reactor (ID:807) Dongsheng Yuan and Shuhong Wang
11:30 – 11:45 Ferroresonance assessment in a case study wind farm with 8 units of 2 MVA DFIG wind turbines (ID:911) Massood Keshavarz Siahpoosh, David Dorrell and Li Li
11:45 – 12:00 Investigation of the Dynamic Characteristics of a Coaxial Magnetic Gear under Loading Condition Based on Analytical Model (Invited) (ID:096) Xiao Liu, Yunyun Zhao, Xiaoxu Zhang, Derong Luo and Shoudao Huang
12:00 – 12:15 Multi-field Coupling Analysis of High Speed Permanent Magnet Machine (ID:139) Zezhi Xing, Xiuhe Wang and Mengmeng Tian
12:15 – 12:30 Feature Selection for The Classification of Clinical Data of Stroke Patients (ID:836) Onny Setyawati, Aji Seto Arifianto and Moechammad Sarosa
Poster Sessions (7F – 7J)
Session 7F: Electric Machine Analysis and Design (A)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Jianguo Zhu
11:15 – 12:45 Analysis of a Novel Axial Flux Permanent Magnet Eddy-Current Coupling with a Movable Stator Ring (ID:109) Yibo Li, Heyun Lin, Hui Yang, Shuhua Fang, Haitao Wang and Keyi Wang
11:15 – 12:45 Axial Magnetic Force Analysis of the Direct-drive Radial Axial Flow Turbine with Conical-rotor PM Generator (ID:251) Jiabao Wang, Chao Guo, Shoudao Huang, Xiao Liu and Qicheng Dai
11:15 – 12:45 Numerical Evaluation on the Cooling Performance of a Wound Field Synchronous Motor with Dual Cooling Passages (ID:915) Sungjin Yang, Byungho Yoo, Myungsung Lee and Joo Han Kim
11:15 – 12:45 Research on Shaft Voltage in Permanent Magnet Synchronous Machine with Sectionalized Stators (ID:337) Bo Peng, Xiuhe Wang, Wenliang Zhao and Mengmeng Tian
11:15 – 12:45 The Inductance Parameter Calculation for Coarse-Exact Coupling Co-magnetic Reluctance Resolver (ID:577) Shang Jing, Liu Xueyuan and Liu Chengjun
11:15 – 12:45 A Dual Permanent Magnet Machine for High-Torque Low-Speed Applications (ID:584) Yulong Liu, Weinong Fu, Xinhua Guo, Zhongshen Li and Ruiming Fang
11:15 – 12:45 Research on the Performance Simulation of Multi-stator Traveling Wave Type Ultrasonic Motors (ID:598) Zhike Xu, Peng Pan, Desong Dai and Long Jin
11:15 – 12:45 Novel Variable Reluctance Hybrid Magnet Memory Machines (ID:699)
23
Hui Yang, Heyun Lin, Z. Q. Zhu and Shukang Lyu 11:15 – 12:45 Design and Research of High-capacity Doubly-fed Start-up Low-speed High-
torque PMSM (ID:822) Guojun Pang, Zhongchao Wei and Xi Chen
11:15 – 12:45 Design and Analysis of a Novel Two-speed Line-start Permanent Magnet Motor (ID:713) Leimin Xu, Jin Wang, Zhihao Cui, Libing Zhou and Shuanghong Wang
11:15 – 12:45 Design and Analysis of Magnetic-Geared Permanent Magnet Synchronous Motor for Driving Electric Vehicles (ID:301) Chan-Bae Park and Geochul Jeong
Session 7G: Magnetic Materials for Machines (A)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Xuefei Mao
11:15 – 12:45 Design and Analysis of Outer-Rotor Permanent Magnet Synchronous Machine with Amorphous Stator Core (ID:781) Yong Kong, Mingyao Lin, Da Xu, Nian Li, Xinghe Fu and Kai Liu
11:15 – 12:45 A Design Method with Iron Powder Core for a Claw Pole Type Half-wave Rectified Variable Field Flux Motor (ID:522) Yuya Eguchi, Yuta Nakashima, Takashi Abe and Tsuyoshi Higuchi
11:15 – 12:45 Numerical Simulation of the Thermo-Electromagnetic Properties of Coated Superconductor Magnets in Traveling Magnetic Field (ID:341) Guangtong Ma, Tianyong Gong and Zhitao Wang
11:15 – 12:45 Investigation of the Flux Leakage Effects in Transverse-Flux Magnetic Gear (ID:665) Xianglin Li, Shengwei Liu, Yubin Wang and Ying Fan
11:15 – 12:45 Eddy Current Loss Analysis of Two Degrees of Freedom Permanent Magnet Wind Power Generator (ID:031) Zheng Li and Lingwei Zhang
11:15 – 12:45 Analysis and Experiment of Temperature Gradient Method for Modal Improving apply to Magnetic High-speed Rotor (ID:133) Kun Wang, Bangcheng Han, Yun Le and Xiquan Liu
11:15 – 12:45 Discussion on Comparison of Magnetic Geared Linear Motors with Different Magnetization Direction (ID:504) Mizuki Ubukata and Tomoyuki Shimono
11:15 – 12:45 Influence of axial ventilation structures on Electromagnetic field and Heat Transfer of Traction Motor used for High - speed EMU (ID:574) Junci Cao, Zhigang Wu, Weili Li, Dong Li, Xiaochen Zhang, Yihuang Zhang and Jing Huang
11:15 – 12:45 Insulation Design and Performance Analysis for Direct-Type Lead Exit of UHV Transformer (ID:636) Jiantao Sun, Hejun Zhang, Jinzhong Li, Wei Hu, Shuqi Zhang, Xiaoqi Gong, Chao Wu, Xinru Yu and Xueli Liu
11:15 – 12:45 Influence of Design Parameters on Characteristics of External-Rotor Permanent Magnet Synchronous Machine (ID:046) Tao Fan, Qi Li, Xuhui Wen, Ye Li and Xingming Zhuang
24
Session 7H: Magnetic Materials for Machines (B)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Yam Siwakoti
11:15 – 12:45 Measurement, Modeling and Simulation on Magnetostrictive Properties of Magneto-Rheological Elastomers (ID:723) Jianbin Zeng and Haiquan Zeng
11:15 – 12:45 Research on the Magnetic Hysteresis of Soft Magnetic Composite Material (ID:801) Weijie Xu, Nana Duan, Yongjian Li, Shuhong Wang, Youguang Guo and Jianguo Zhu
11:15 – 12:45 Design of a Distributed Winding on a Ceramic Carrier for an Ironless, High Speed Axial-Flux PM-Machine (ID:395) Tobias Micklitz and Wilfried Hofmann
11:15 – 12:45 Research of the Amorphous Alloy Transformer with Runway Shape Winding Based on the Magnetic-Vibration-Noise Coupling Calculation Method (ID:454) Ying Zhang, Jian Guo and Shuhua Fang
11:15 – 12:45 Stress Analysis of Motor Cores Based on the Measurement of Magnetostriction of Non-oriented Silicon Steel Sheet (ID:507) Tong Ben, Qingxin Yang, Rongge Yan and Lihua Zhu
11:15 – 12:45 Magnetic Properties Analysis of the Soft Ferrites Cores in High Frequency Transformer under Non-Sinusoidal Excitations (ID:709) Shuaichao Yue, Qingxin Yang, Yongjian Li and Guizhi Xu
11:15 – 12:45 Influence of Electrical Steel Characteristics on Efficiency of Industrial Induction Motors (ID:618) Sungho Lee and Jangho Yun
11:15 – 12:45 Core Losses Calculation of Nanocrystalline Alloy High Frequency Transformer Considering Magnetic Hysteresis Effects (ID:790) Hailin Li, Shuhong Wang and Jianguo Zhu
11:15 – 12:45 Study on Topology of Magnetic Gear Considering shape of Pole Piece (ID:832) Jae-Hak Lee, Dae-Woo Kim, Yong-Jae Kim and Sang-Yong Jung
11:15 – 12:45 Design and Analysis of Axial Flux Permanent Magnet Motor for Electric Bicycles with Hybrid Stator Core (ID:779) Se Hyun Rhyu, Salman Khaliq, Rae Eun Kim and Ki Doek Lee
Session 7I: Power Electronics for Renewable Energy Systems
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Dylan Lu
11:15 – 12:45 Load frequency control using H infinity control in case of considering PV (ID:762) Shunsuke Horie, Kazuto Yukita, Toshiro Matsumura and Yasuyuki Goto
11:15 – 12:45 Implementation of Genetic Algorithm-Based SHE for a Cascaded Half-Bridge Multilevel Inverter Fed from PV Modules (ID:206) Kotb M. Kotb, Abd El-Wahab Hassan and Essam Eddin Rashad
11:15 – 12:45 A Three-Phase Cascaded H-Bridge Quasi-Switched Boost Inverter for Renewable Energy System (ID:482) Van-Thuan Tran, Minh-Khai Nguyen, Youn-Ok Choi, Geum-Bae Cho and Myoung-Han Yoo
25
11:15 – 12:45 Research of a Double-Galfenol-Rods Magnetostrictive Transducer (ID:289) Yafang Li, Wenmei Huang, Bowen Wang, Xiaojing Cui, Rongge Yan and Zeyu Yang
11:15 – 12:45 A Flexible Topology Converter for Photovoltaic Micro-inverter (ID:076) Jiarong Kan, Yunya Wu and Zhilei Yao
11:15 – 12:45 50kW-class integral transformer / reactor design for solar PCS to improve power density (ID:309) Su Yong Kim, Ju Hee Cho and Ju Lee
11:15 – 12:45 An Integrated Boost Three-phase Half-bridge Converter (ID:053) Zhilei Yao, Jing Xu, Chi Wang and Xiulin Wang
11:15 – 12:45 Comparison and Analysis of a Novel Passive Damping for LCL Filtered Voltage Source Inverters (ID:172) Miaomiao Wei and Congzhe Gao
11:15 – 12:45 Vector Control with d-q Transformation Self-correction for Stand-alone Brushless Doubly Fed Induction Generator Power System (ID:637) Min Lu, Yu Chen, Lei Sun, Debin Zhang and Yong Kang
11:15 – 12:45 An Improved Single-stage Buck-boost Grid-connected Inverter (ID:795) Zhilei Yao, Jing Xu, Xiulin Wang and Chi Wang
Session 7J: Analysis, Design and Control of Renewable Energy Systems
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Jiangfeng Zhang
11:15 – 12:45 Power Gain by Series Voltage Compensation (ID:159) Byungkeun Yoon, Chul Yun, Taeho Oh, Jooyoung Park, Sang-Back Choi, Yong-Su Jin and Woohyen Kwon
11:15 – 12:45 Input Current Ripple Reduction and High Efficiency for PEM Fuel Cell Power Conditioning System (ID:658) Yuedong Zhan, Youguang Guo, Jianguo Zhu and Li Li
11:15 – 12:45 Management of Solar Energy in Microgrids Using IoT-Based Dependable Control (ID:758) Manh Duong Phung, Michel Villefromoy and Quang Ha
11:15 – 12:45 Design And Analysis of 50KW Dual - Stator Brushless Doubly - Fed Generator for Wind Turbine (ID:738) Fengge Zhang, Tianchu Tong and Hao Liu
11:15 – 12:45 Design and Analysis of Dual-Stator HTS Reluctance-Rotor Brushless Doubly-Fed Wind Generator (ID:743) Xinkai Zhu, Ming Cheng, Peng Han, Gan Zhang and Xinchi Wei
11:15 – 12:45 Application of Hysteretic Current-mode Control Technology for Electrostatic Precipitator (ID:087) Qiang Bo, Haitao Xu, Wei Duan, Di Yang, Chongjian Li and Chunyi Zhu
11:15 – 12:45 Design and Simulation of Multi-Energy Hybrid Power System Based on Wave and Wind Energy (ID:647) Minshuo Chen, Lei Huang, Jian Yang and Yifan Lyu
11:15 – 12:45 State-of-Charge Monitoring of a Lithium Iron Phosphate Battery at Various Temperatures (ID:490) Jonghoon Kim, Seongjun Lee, Seonghyeon Ju, Younok Choi and Guembae Cho
11:15 – 12:45 The Joint Simulation of a Stand-Alone Photovoltaic System Based on PSIM and Matlab (ID:760)
26
Shan Lei, Haifeng Wang and Guangkun Lian 11:15 – 12:45 Excitation Control System of Large -capacity Energy Storage Generator with an
Dynamic DC Load (ID:557) Liu Jinli, Ma Weiming, Zhai Xiaofei, Teng Teng and Duan Yaoqiang
Lunch Break
12:45 – 13:45 Location: ICC
Oral Sessions (8A – 8E)
Session 8A: Control in Electric Machines (C)
13:45 – 15:15 Location: Cockle Bay Room 2, ICC Chairs: Jiefeng Hu and Huang Shoudao
13:45 – 14:00 Torque Control of Permanent Magnet Synchronous Motor Using Flux Vector (ID:310) Meng Xiao, Yan Yan, Weihe Xu, Tingna Shi and Changliang Xia
14:00 – 14:15 Eccentricity Fault Analysis in PMSM based Marine Propulsion Motors (ID:347) Kazi Ahsanullah, Elango Jeyasankar and Sanjib Panda
14:15 – 14:30 Improved Model Predictive Torque Control of Permanent Magnet Synchronous Motor with Duty Ratio Optimization and Cost Function Correction (ID:558) Ming Liu, Jiefeng Hu and Ka Wing Chan
14:30 – 14:45 Optimal Design and Vector Control of an Interior Ferrite Permanent Magnet Synchronous Motor (ID:462) Yong-Tao Tan and Jian-Xin Shen
14:45 – 15:00 A Fuzzy Clustering Algorithm-Based Dynamic Equivalent Modeling Method for All-DC Offshore Wind Farm with permanent magnet synchronous generators (ID:711) Wei Li, Hui Wang, Shoudao Huang, Derong Luo, Mingcheng Lv and Jiabao Wang
15:00 – 15:15 A High Performance feed-forward Control of the Permanent Magnet Synchronous Motor for the Pitch Control System in Wind Turbine (ID:778) Shoudao Huang, Mingcheng Lyu, Xiao Liu, Xuan Wu and Wei Li
Session 8B: Electric Machines for Renewable Energy Generation
13:45 – 15:15 Location: Meeting Room C3.1, ICC Chairs: Shuangxia Niu and Ying Zhu
13:45 – 14:00 Influence of Load on Discharge Performance of high-speed Flywheel Energy Storage System (ID:555) Jinyang Li, Linkui Du, Weili Li, Jiafeng Shen, Jianjun Zeng, Dong Li and Purui Wang
14:00 – 14:15 Influence of winding layout and airgap length on radial forces in large synchronous hydrogenerators (ID:407) Erlend L. Engevik, Mostafa Valavi and Arne Nysveen
14:15 – 14:30 Study on the Nonlinear Characteristics of the Inclined Self-circulating Evaporative Cooling System for Wind Power Generator (ID:540) Jing Yan, Lin Ruan and Shunzhou Yu
27
14:30 – 14:45 Output Power Smoothing Control for the PMSG Based Wind Farm by Using the Allocation of the Wind Turbines (ID:055) Ying Zhu, Rui Zhao and Jingtao Zhao
14:45 – 15:00 Optimization and Performance of Linear PM-Assisted Reluctance Synchronous Machine for Wave Energy Generation (ID:003) Xuedong Ma, Qinfen Lu, Xiaoyan Huang and Yunyue Ye
Session 8C: Magnetic Materials for Machines (C)
13:45 – 15:15 Location: Meeting Room C3.2, ICC Chairs: Ayman El-Refaie and Yongjian Li
13:45 – 14:00 Multi Magnetic Material Laminated Cores: Concept and Modelling (ID:463) Subrato Saha, Nuwantha Fernando and Lasantha Meegahapola
14:00 – 14:15 Frequency-dependent complex magnetic permeability and magnetic losses of Fe-Ga alloy (ID:365) Ling Weng, Xiaoning Cao, Hang Xv, Wenmei Huang, Bowen Wang and Zeyu Yang
14:15 – 14:30 Cogging Torque Minimization of SMC Motor with Axially Tapered Stator Tooth Tip (ID:639) Canruo Chen, Dawei Li, Ronghai Qu, Haiyang Fang, Xinggang Fan, Manoj Shah and Peiyu Zhang
14:30 – 14:45 Design and Analysis of a Novel 2-D Magnetization Structure for Magnetic Properties Measurement in Wide Range of Frequency (ID:587) Xinran Yu, Qingxin Yang, Yongjian Li, Changgeng Zhang and Guizhi Xu
14:45 – 15:00 Approach to Increase the Measurement Accuracy of Magnetic Characteristic of Open Circuit Test Sample Material (ID:373) Qiming Zhao, Yunqi Shangguan, Jun Zou and Jiansheng Yuan
15:00 – 15:15 Role of Advanced Materials in Electrical Machines (ID:024) Ayman El-Refaie
Session 8D: High Power Converters (B)
13:45 – 15:15 Location: Meeting Room C3.4, ICC Chairs: Wen Soong and Yongchang Zhang
13:45 – 14:00 Harmonic Mitigation of a Grid-connected Photovoltaic System using Shunt Active Filter (ID:693) Mohamed J.M.A Rasul, H.V Khang and Mohan Lal Kolhe
14:00 – 14:15 A Sag and Harmonic compensation Method without Harmonic Detection for Dynamic Voltage Restorer (ID:691) Shuai Yuan, Alian Chen, Yiwei Pan and Chenghui Zhang
14:15 – 14:30 Capacitor Voltages Balancing of a Symmetrical Hybrid Nine-Level Inverter with reduced voltage sensors (ID:252) Dabo Wei, Yongdong Li, Zhe Wang, You Wang and Kui Wang
14:30 – 14:45 Zero-Voltage-Transition Interleaved Bi-directional Low Voltage DC–DC Converter with Switching Frequency Modulation for MHEV (ID:460) Soon-Ryung Lee, Jong-Young Lee, Won-Sang Jung, Yun-Ji Park and Chung-Yuen Won
14:45 – 15:00 Current Control for H6 Topology Based PV Inverter subject to Grid Voltage Harmonics (ID:208)
28
Xiaohua Wang, Yun Wang and Chengxiang Liu 15:00 – 15:15 An Improved Phase-Shifted PWM Method for a Symmetrical Hybrid Nine-Level
Inverter (ID:476) Kui Wang, Dabo Wei and Yongdong Li
Session 8E: Microgrids (Power System) (A)
13:45 – 15:15 Location: Meeting Room C3.5, ICC Chairs: Guoen Cao and Takashi Kosaka
13:45 – 14:00 A Voltage Ripple Suppression Method of DC Microgrid Under Unbalanced Load (ID:333) Xiaorong Zhu, Yumeng Zhang and Jin Yang
14:00 – 14:15 Multi-Area Economic Emission Dispatch Considering Load Uncertainty (ID:307) Ali Azizivahed, Sahand Ghavidel, Mojtaba Jabbari Ghadi, Li Li and Jiangfeng Zhang
14:15 – 14:30 Large Signal Stability Analysis of the DC Microgrid with the Storage System (ID:327) Xinbo Liu and Yawei Bian
14:30 – 14:45 Congbo Wang, Ke Jia, He Zhao, Tianshu Bi, Zijin Li and Bohan Liu A New Protection Scheme for DC Substation System Based on Single-ended Measurement (ID:243) ( abstract )
14:45 – 15:00 An Improved Strategy of Aviation Power Generation System Based on Dual Excitation Control (ID:286) Jianmei Xu, Yanbo Che, Yuancheng Zhao, Jinhuan Zhou, Guojian Liu and Gengji Wang
15:00 – 15:15 Static Var Compensator Allocation Considering Transient Stability, Voltage Profile and Losses (ID:306) Sahand Ghavidel, Ali Azizivahed, Mostafa Barani, Jamshid Aghaei, Li Li and Jiangfeng Zhang
Poster Sessions (8F – 8J)
Session 8F: Losses and Thermal Management of Electric Machines (A)
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Quang Ha
13:45 – 15:15 Rotor Loss Calculation and Thermal Analysis of a Dual-Stator Axial-Flux Permanent Magnet Machine with Combined Rectangle-Shaped Magnets (ID:722) Cong Wang, Ronghai Qu, Jian Li, Xinggang Fan, Dawei Li and Yang Lu
13:45 – 15:15 Experimental and Theoretical Study of Interlaminar Eddy Current Loss in Laminated Cores (ID:623) Sahas Bikram Shah, Paavo Rasilo, Anouar Belahcen and Antero Arkkio
13:45 – 15:15 Fast Thermal Analysis of an ISG in Hybrid Electric Vehicle Drive System (ID:383) Jinhua Du, Quanwei Liu, Yuntian Xue and Shuhong Wang
13:45 – 15:15 Field-Circuit Coupled Time-Stepping Finite Element Analysis of Rotating Core Loss for Induction Motor (ID:601) Xuezhi Wan, Yongjian Li, Changgeng Zhang, Qingxin Yang and Jianguo Zhu
13:45 – 15:15 Arc Characteristic Analysis of Railway Vehicle according to Excitation Frequency
29
using Simulator of Contact Loss (ID:542) Wan-Il Kim, Kye-Seung Lee, No-Geon Jung, Kyung-Wan Koo and Jae-Moon Kim
13:45 – 15:15 The analysis of eddy current loss in HSPMSM with improved experimental method based on drag system (ID:054) Gang Liu and Xu Liu
13:45 – 15:15 The Influence on Trust of a Down-to-hole Tubular Permanent Magnet Linear Hammer due to High Temperature in Deep Hole (ID:664) Tao Wu, Kaiyuan Fu, Jianguo Zhu and Gang Lei
13:45 – 15:15 Research of the influence of Third Harmonic Injection PWM Inverters on Iron Losses of Induction Motors (ID:886) Ze Song, Yongjian Li, Changgeng Zhang, Erping Li and Jianguo Zhu
13:45 – 15:15 Reduction Permanent Magnet Eddy Current Loss of PMSM in Flywheel Energy Storage System for Uninterruptable Power Supply (ID:562) Ping Wang, Gengji Wang and Xiaoyuan Wang
Session 8G: Losses and Thermal Management of Electric Machines (B)
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Youguang Guo
13:45 – 15:15 Rotor Design and Optimizations for Interior Permanent Magnet Machines in Motorized Spindle Application (ID:611) Jing Rao, Lichun Zhang and Guihou Zhou
13:45 – 15:15 Non-rotating High-accuracy Iron Loss Measurements on Motor Stator Stacks (ID:660) Howard Lovatt, Peter Watterson and James Schroth
13:45 – 15:15 Loss Reduction of Permanent Magnet Synchronous Machines based on Decoupling Control Strategy during Dynamic Processes (ID:654) Shichuan Ding, Min Ding, Jun Hang, Qunjing Wang, Baolei Wei and Peng Zhang
13:45 – 15:15 Lumped-Parameter Thermal Model and Testing of Permanent Magnet Machine (ID:259) Ye Li, Tao Fan, Qi Li and Xuhui Wen
13:45 – 15:15 Loss and Thermal Estimation Method of a Magnetic Bearing System Considering Electromagnetic and Temperature Coupling (ID:461) Xiaojun Ren, Yun Le, Bangcheng Han and Kun Wang
13:45 – 15:15 Calculation and Analysis of the Hot-Spot Temperature-rise for Large Power Transformer Based on 3D Electromagnetic-Fluid-Thermal Coupling Method (ID:470) Yongteng Jing, Yan Li, Xiaoguang Yuan and Huan Wang
13:45 – 15:15 Segmented Lamination Stator Optimization of Linear Oscillating Motor Based on Magnetic Field and Thermal Network Coupling Analysis (ID:783) Tianyi Wang, Zongxia Jiao and Liang Yan
13:45 – 15:15 Research on the flow characteristics of different cooling medium in the inner evaporative cooling turbo-generator (ID:617) Haihong Dong
13:45 – 15:15 Design of Control System for 1000MW Megawatt - class Evaporative Cooling Water Turbine Generator based on LabVIEW (ID:372) Guo Shuqin
13:45 – 15:15 Study and Design of Low-Speed Direct-Driven Permanent Magnet Synchronous Machines(PMSM) for Fan Used on Power Air Cooling Island (ID:186)
30
Xiaohui Xu, Guihou Zhou and Jing Rao
Session 8H: Permanent Magnet Synchronous Machines
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Daohan Wang
13:45 – 15:15 Practical Aspects of Implementing Skew Angle to Reduce Cogging Torque for the Mass-production of Permanent Magnet Synchronous Motors (ID:227) Rakib Islam and Alejandro Pina Ortega
13:45 – 15:15 Influence of Auxiliary Slot on Electromagnetic Vibration in PMSM with Similar Slot and Pole Number (ID:290) Ting Dong, Ruiqing Wang, Jicheng Zhang and Kun Liu
13:45 – 15:15 Trade-Off with Starting Capability to Maximize Efficiency of a Single-Phase Line-Start Permanent Magnet Motor (ID:293) Kazumi Kurihara, Hirotaka Fukuda and Tomotsugu Kubota
13:45 – 15:15 Airgap Magnetic Field Estimation for IPM Rotors Considering Their Non-Uniform Local Saturation (ID:496) Mohammad Farshadnia, Alireza Pouramin, Rukmi Dutta and John Fletcher
13:45 – 15:15 A Novel Flux Reversal PM Machine with Halbach Array Magnets in Stator Slot Opening (ID:754) Kangfu Xie, Dawei Li, Ronghai Qu, Yuting Gao and Yuan Pan
13:45 – 15:15 Electrical Field Generation by High Speed Rotation of a Bipole Magnet Configuration for Nerve Activation (ID:776) Peter Watterson
13:45 – 15:15 Magnetic Field Analysis of Hybrid Driven Permanent Magnet Multi-DOF Motor (ID:030) Zheng Li, Lingwei Zhang, Wei He, Yan Zhang and Qunjing Wang
13:45 – 15:15 Design and Analysis of a Single-Phase Oscillating Permanent-Magnet Linear Machine (ID:926) Mingqiao Wang, Jingang Bai, Yuan Wang, Guangyuan Qiao and Ping Zheng
13:45 – 15:15 No-Load Magnetic Field Distribution in Axial Flux Permanent Magnet Machine with Static Eccentricity (ID:725) Qiwei Wang, Lei Chen, Chai Feng and Lei Gan
13:45 – 15:15 Comparative Study of Double-Sided Toroidal-Winding Linear PM Vernier Machines with Different Secondary Configurations (ID:082) He Zhang, Yi Shao, Baoquan Kou, Ronghai Qu and Zi-Qiang Zhu
13:45 – 15:15 Design of Spoke-Type Ferrite Interior Permanent Magnet Synchronous Machines Considering the Number of Poles (ID:671) Weizhong Fei and Jian-Xin Shen
Session 8I: Microgirds (Power Electronics)
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Dylan Lu
13:45 – 15:15 Multi-cell DC-DC Converter based Solid-State Transformer Design Featuring MV grid tie applications (ID:202) Kazi Saiful Alam, Lew Andrew R. Tria, Dr. Daming Zhang, Dr. Dan Xiao and Prof. M.F. Rahman
31
13:45 – 15:15 Predictive Control for Single-Phase Multi-Module UPS Inverters with Output LC filter Modeling (ID:354) Jung-Min Park, Kang-Hyun Lee, Yun-Ji Park, Jung-Hyo Lee and Chung-Yuen Won
13:45 – 15:15 Multinomial Model of Droop Control Method for Parallel-Connected UPS Inverters (ID:456) Jung-Min Kim, Bum-Jun Kim, Jin-Ho Cho, Jung-Hyo Lee and Chung-Yuen Won
13:45 – 15:15 Design, Analysis and Control of a Magnetically-coupled Multi-port Multi-operation Mode Residential Micro-grid (ID:768) Mohammad Jafari, Zahra Malekjamshidi and Jianguo Zhu
13:45 – 15:15 Parallel-connected Two-generator Model Following Control for Grid-Interconnected Inverter (ID:784) Atsushi Umemura, Rion Takahashi and Junji Tamura
13:45 – 15:15 A Second-Order Generalized Differentiator Method for Eliminating DC Component in the Three-Phase PLL for Grid-Connected Inverters (ID:125) Choong-Ryeol Lee, Tae-Won Chun and Hong-Hee Lee
13:45 – 15:15 An Enhanced Control Strategy for Seamless Transfer of Grid-connected Single-Phase Inverter in Synchronous Rotating Frame (ID:481) Bum-Jun Kim, Jin-Ho Cho, Jung-Min Kim, Lee Jung-Hyo and Chung-Yuen Won
13:45 – 15:15 New Single Phase PLL Control Method for Electric Railway Converter System (ID:205) Euljae Lee, Chajoong Youn and Chanhoi Ahn
13:45 – 15:15 Application of Virtual Synchronous Generator Technology in Three-Phase Four-Leg Inverter (ID:610) Zisen Qu, Huan Yang and Yunyi Cai
Session 8J: Operation of Magnets and Machinery
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Yunkai Huang
13:45 – 15:15 Feed Rate Fluctuation Compensating NURBS Interpolator for CNC Machining (ID:158) Chang Nho Cho, Young Hun Song and Hong Ju Kim
13:45 – 15:15 The Effect of Spray Parameter on Heat Dissipation in Spray Evaporatvie Cooling High Power Density Motors (ID:179) Li Zhenguo and Liu Shaoyan
13:45 – 15:15 Research on the Two Phase Flow of Evaporative Cooling System In Higher Power Density ECRIS Magnet (ID:261) Xiong Bin, Gu Guobiao and Ruan Lin
13:45 – 15:15 Design of lower vibration reactors (ID:468) Rongge Yan, Luna Zhao and Lihua Zhu
13:45 – 15:15 Heat Dissipation Evaluation and Optimization of Air Cooling Induction Motor Used for Mini Electric Vehicle (ID:752) Cuiping Li, Shitao Cheng, Zuoming Liu, Hongbo Li and Junhui Li
13:45 – 15:15 Cecile Cuchet, Guillaume Burnand, Louis Masson, Yoan Civet and Yves Perriard Improved Analytical Model of Hyperelastic Magnetic Membranes (ID:770) ( abstract )
13:45 – 15:15 A Study on the Skin Effect and Eddy Current Distributions in Conductive Media (ID:242)
32
Jeong Sik Kim, Sang Hyeon Im and Gwan Soo Park 13:45 – 15:15 Research on Temperature Field Simulation of Dry Type Air-Core Reactor
(ID:019) Fa Ting Yuan, Zhao Yuan, Jun Xiang Liu, Yong Wang, Wen Xiong Mo and Jun Jia He
13:45 – 15:15 Temperature Characteristics Analysis of IPMSM according to Stator Design Parameter (ID:764) Duk-Hwa Go, Yong-Tae Kim, Heung-Kyo Shin, Gyu-Tak Kim and Ki-Bong Jang
13:45 – 15:15 A Proposal of Magnetic Levitation System Without Using Sideslip-Sensors and Actuators in Guidance Control (ID:099) Yuki Arita, Kyosuke Ota, Ikuto Oikawa and Toshiko Nakagawa
Afternoon Tea Break
15:15 – 15:30 Location: ICC
Oral Sessions (9A – 9E)
Session 9A: Magnetic Materials for Machines (D)
15:30 – 17:00 Location: Cockle Bay Room 2, ICC Chairs: Xuefei Mao and Yves Perriard
15:30 – 15:45 Design of a novel high frequency 2-D magnetic tester with nanocrystalline material considering stress effects (ID:708) Li Angxuan, Li Yongjian and Zhang Changgeng
15:45 – 16:00 Measurement of Magnetic Properties of Soft Magnetic Composite Materials at High Frequencies and High Flux Densities (ID:021) Long Chen, Youhua Wang, Chengcheng Liu, Xiaolin Zhang and Zhao Wang
16:00 – 16:15 Studies on Grain-Oriented Silicon Steel Used in Traction Motors (ID:576) Ruilin Pei, Lubin Zeng, Shuhui Li and Tim Coombs
16:15 – 16:30 Experiment Research on Motor Efficiency Improvement through the Eddy Current Reduction using Segmentation of Rotor Magnet (ID:278) Sanghun Lee, Hongseouk Oh and Hansup Kim
16:30 – 16:45 Post-assembly magnetization of High Speed PM Rotor with Metallic Sleeve (ID:821) Yiliang Lv, Dong Xia, Liang Li and Qingjian Wang
16:45 – 17:00 Soft Magnets Implementation using a Stereolithography 3d Printer (ID:546) Cecile Cuchet, Paolo Germano, Yves Perriard and Augustin Muster
Session 9B: Electric Machine Analysis and Design (B)
15:30 – 17:00 Location: Meeting Room C3.1, ICC Chairs: Feng Niu and Erich Schmidt
15:30 – 15:45 Analysis and Experimental Study of a Novel Self-Differential Eddy Current Sensor for High-Speed Magnetic Electrical Machine (ID:204) Kun Wang, Lisheng Zhang, Shiqiang Zheng, Jinxiang Zhou and Xiquan Liu
15:45 – 16:00 Influence of Stator Slot and Pole Number Combination on Rotor Bar Current Waveform and Performance of Induction Machines (ID:036)
33
Tayfun Gundogdu, Z.Q. Zhu and Jean-Claude Mipo 16:00 – 16:15 High Specific Power Electrical Machines: A System Perspective (ID:029) Ayman
Ayman El-Refaie 16:15 – 16:30 Influence of Rotor Slot Number on Rotor Bar Current Waveform and
Electromagnetic Performance of Induction Machines (ID:035) Tayfun Gundogdu, Z.Q. Zhu and Jean-Claude Mipo
16:30 – 16:45 Evaluation of Iron Loss Models in Electrical Machines (ID:034) Shaoshen Xue, Jianghua Feng, Shuying Guo, Zhichu Chen, Jun Peng, Wenqiang Chu and Z.Q. Zhu
Session 9C: Interior Permanent Magnet Machines
15:30 – 17:00 Location: Meeting Room C3.2, ICC Chairs: Guohai Liu and Subrato Saha
15:30 – 15:45 Filter Setting for Improving Torque Control Performance of IPMSMs in Overmodulation Region of Inverter (ID:684) Yosuke Nakayama and Shinji Doki
15:45 – 16:00 Cogging Torque and Torque Ripple Reduction of Interior Permanent Magnet Machines by Using Asymmetric Flux-Barriers (ID:368) Tan-Wei Zhou and Jian-Xin Shen
16:00 – 16:15 Prediction and Evaluation of PWM-Induced Current Ripple in IPM Machines Incorporating Slotting, Saturation, and Cross-Coupling Effects (ID:403) Le Chang and Thomas Jahns
16:15 – 16:30 A Comparative Study of Optimally Designed V-Shaped Magnet IPM Synchronous Motors (ID:410) Buddhika De Silva Guruwatta Vidanalage, Mohammad Sedigh Toulabi and Shaahin Filizadeh
16:30 – 16:45 Restarting with Speed for IPMSM Based on Hybrid Synchronized PWM Control Schemes for Rail Train Traction System (ID:346) Guofeng Yuan, Xiaojun Hou, Chunyu Zheng, Zhengxi Li and Yixin Yin
Session 9D: Motor Drives (D)
15:30 – 17:00 Location: Meeting Room C3.4, ICC Chairs: Mohammad Farshadnia and Qingfang Teng
15:30 – 15:45 Sliding-Mode MRA Observer-based Model Predictive Current Control for PMSM Drive Systems with DC-link voltage Sensorless (ID:157) Qingfang Teng, Jie Tian, Junyi Duan, Hongwei Cui, Jianguo Zhu and Youguang Guo
15:45 – 16:00 An Efficient Two-Vector-Based Model Predictive Control for Induction Motor Drives (ID:675) Yongchang Zhang and Yuning Bai
16:00 – 16:15 A Study on the LCC Analysis of GTO in the Main Conversion System in 8200 series Electric Locomotive (ID:519) No-Geon Jung, Wan-Il Kim, Jae-Moon Kim, Kye-Seung Lee and Chin-Young Chang
16:15 – 16:30 A Study of Design Method of Full-Order Observer based on Extended Electromotive Force for Position Sensorless Control of IPMSMs (ID:512) Toshiya Mabuchi, Ayame Makimura, Mutuwo Tomita, Shota Kondo, Masaru
34
Hasegawa, Shinji Doki and Shinji Kato 16:30 – 16:45 The Research on the Current Source Controller of Asynchronous Motor (ID:059)
Haifeng Zhang, Xuejian Yuchi and Peng Wang 16:45 – 17:00 Position Sensorless Control of Synchronous Reluctance Motors at Very Low
Speeds Region Using High-frequency Current Control System (ID:086) Toshiya Mabuchi, Ayame Makimura, Mutuwo Tomita, Shota Kondo, Masaru Hasegawa, Shinji Doki and Shinji Kato
Session 9E: Thermal and Mechanical Analysis (A)
15:30 – 17:00 Location: Meeting Room C3.5, ICC Chairs: Wei Hua and Joris Jaguemont
15:30 – 15:45 Optimization Design of Heat Dissipation Structure of Integrated Motor Drives for Application in Aerospace (ID:847) Tian Wei, Qian Hao and Guo Hong
15:45 – 16:00 Design and Construction of a Single-Arm Crane Miniature for Stevedoring (ID:353) Rini-Nur Hasanah
16:00 – 16:15 Mechanical Characteristics Analysis of Defective Transformer Windings under Short-Circuit Fault Using 3-D FEM (ID:843) Shuang Wang, Shuhong Wang, Hailin Li and Dongsheng Yuan
16:15 – 16:30 Thermal investigation on HSPM with new alloy sleeve (ID:733) Xiaochen Zhang, Liwei Li, He Zhang, Chris Gerada, David Gerada and Jing Li
16:30 – 16:45 Optimized passive thermal management for battery pack (ID:028) Joris Jaguemont
Poster Sessions (9F – 9J)
Session 9F: Optimization of Electric Machines (A)
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Quang Ha
15:30 – 17:00 Performance Analysis and Optimization of Permanent Magnet Synchronous Motor Based on Deep Learning (ID:571) Fei Wang and Liang Jin
15:30 – 17:00 Analysis and Optimization of a New 2-D Magnet Array for Linear and Rotary Actuator (ID:880) Ping Jin and Yujing Guo
15:30 – 17:00 Efficiency Improvement of a 12-Pole 17.5 kW Induction Motor Using Converter-fed Wound Rotor (ID:253) Yanmei Yao, Chandur Sadarangani and Hui Zhang
15:30 – 17:00 Optimization of External Rotor Surface Permanent Magnet Machines Based on Efficiency Map over a Target Driving Cycle (ID:102) Qi Li, Tao Fan, Ye Li, Zuoliang Wang, Xuhui Wen and Jing Guo
15:30 – 17:00 Multi-Step Optimization Method for the Design of Electric Machines Using Shape and Topology Optimization (ID:827) Seok-Won Jung, Jong-Suk Ro and Hyun-Kyo Jung
15:30 – 17:00 Multi-objective Optimization of IPMSM based on Subspace Division (ID:655) Liu Liwen, Li Hongmei and Ban Dongpo
15:30 – 17:00 A Novel Plasma-Inspired Global Optimization Algorithm Applied to a Permanent
35
Magnet Synchronous Motor Design (ID:813) Jae-Woo Kang, Seok-Won Jung, Jong-Suk Ro and Hyun-Kyo Jung
15:30 – 17:00 Research on Optimization Algorithm of BP neural network for permanent magnet synchronous motor based on Cloud Computing (ID:322) Liang Jin, Dongmei Wang and Qingxin Yang
15:30 – 17:00 Optimal Design of Rotor Topology of PM Synchronous Machine for High Speed Electric Tools (ID:164) Chao Suo, Guoliang Xiao and Wenyi Tu
15:30 – 17:00 Data Interpolation based on Neural Network for Optimal Design of Interior PM Synchronous Machine (ID:816) Ji-Han Lee, Gyeong-Jae Park, Byung Kwan Son, Jong-Wook Kim and Sang-Yong Jung
Session 9G: Electric Machine Analysis and Design (C)
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Ha Pham
15:30 – 17:00 Performance Analysis of Electromagnet Actuator with Different Structures (ID:862) Jiaxin Chen, Zhenchuan Zhang, Youguang Guo and Jianguo Zhu
15:30 – 17:00 Investigation of Crosscoupling effect of a 3-DOF Magnetic Bearing Using Magnetic Circuit Method (ID:473) Yunlong Zhong, Lijian Wu, Youtong Fang and Xiaoyan Huang
15:30 – 17:00 Design of a Three Dimensional Magnetic Field Measurement System for TMS Pre-Testing (ID:682) Hui Xiong, Jianguo Zhu, Jinhua Shi, Shuai Meng and Xiaohui Luo
15:30 – 17:00 A Direct Drive Linear Actuator for a Heliostat Tracking System (ID:085) Ning Zhang, Mike Collins and Howard Lovatt
15:30 – 17:00 Design and Experiment of Surface-Mounted Permanent-Magnet Motors with Integrated Magnetizing Windings (ID:819) Yiliang Lv, Bin Luo, Junjie Wu, Liang Li and Qingjian Wang
15:30 – 17:00 Interior Permanent-Magnet Motor with a Novel Tangential-Magnetic Rotor for Applying to Refrigerant Compressor (ID:042) Ming-Tsung Chui, Jui-An Chiang, Zwe-Lee Gaing and Yao-Yang Hsieh
15:30 – 17:00 Magnetic Field Analysis and Optimum Design of Adjustable Magnetic Liquid Damper (ID:586) Xiaorui Yang, Qingxin Yang, Wenrong Yang and Guizhi Xu
15:30 – 17:00 Comparative Study of Integrated Radial-Axial Flux Rotor Motor using Ferrite Magnet (ID:681) Motohiro Ozeki and Shoji Shimomura
15:30 – 17:00 A Novel Doubly-Fed Flux-Modulation Machine for Electric Vehicle Propulsion (ID:452) Yuan Mao and Shuangxia Niu
15:30 – 17:00 Stable Operation Region Analysis of Direct Torque Control System for Permanent Magnet Synchronous Motor (ID:520) Haoyang Li, Dandan Su, Xin Qiu, Jianfei Yang, Yiping Dou and Baoguo Cao
15:30 – 17:00 A Sensorless Control of Surface-mount Permanent Magnet Synchronous Motor Based on Rotor Flux Estimation (ID:117) Xiaoguang Wang, Lixun Tang, Huan Zhang, Kai Yang and Guoliang Xiao
36
Session 9H: Electric Machine Analysis and Design (D)
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Jianguo Zhu
15:30 – 17:00 Verification for Improved Load Sequence Logic of Emergency Diesel Generator (ID:299) Kwang-Hwan Lee, Hong-Seok Jang and Young-Sik Cho
15:30 – 17:00 Design of DC Electromagnetic Pump and Performance Analysis (ID:111) Chang Eob Kim and Jae Young Lee
15:30 – 17:00 Analysis of Electromagnetic Exciting Force of Marine Permanent Magnet Propulsion Motor Based on Finite Element Method (ID:175) Gang Cui
15:30 – 17:00 Complex Vector Modelling and Simulation of Dual Stator-Winding Induction Machine (ID:248) Olatunji Ogunjuyigbe, Temitope Raphael Ayodele, Olorunfemi Ojo and Tunde Adetokun
15:30 – 17:00 Investigation of High Power Density Permanent Magnet Integrated Starter/Generator Based on Dual Air-Gap Design (ID:445) Po-Wei Huang, Mi-Ching Tsai and Chinweze Ubadigha
15:30 – 17:00 Traction-system Research Based on Different Proportion of Current in Double-end Supply for High-speed Maglev (ID:487) Qiang Tan, Rong Wei and Xiaoxin Wang
15:30 – 17:00 Design and Realization of a Novel Visual Educating Device for Rotating Magnetic Fields (ID:508) Li Yong, Meng Zhao, Qian Wang, Jing Shang, Fei Liu and Liuyang Ren
15:30 – 17:00 Analysis on Method of Calculating Transformer Residual Flux by Using the Integration of Port-voltage Waveform and its Implementation (ID:554) Weiying Yuan, Hua Zhang, Yunqi Shangguan, Jun Zou and Jiansheng Yuan
15:30 – 17:00 Design of a Ferrite PM Assisted-Synchronous Sever Motor (ID:521) Xiaoguang Wang, Lihui Wang, Xinhua Li, Jimin Ma and Zheran Li
Session 9I: DC/DC and AC/DC Converters
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Gao Congzhe
15:30 – 17:00 Stabilization of a Cascaded AC/DC System Based on Small Signal Analysis (ID:045) Bo Liu, Hongqi Ben, Xiaobing Zhang, Xuesong Wang and Tao Meng
15:30 – 17:00 Synchronized PWM Schemes for Discrete-Time Complex Vector Current Regulator of High Power Rectifier (ID:370) Guofeng Yuan, Haopeng Liu and Xiaojun Hou
15:30 – 17:00 A Study on Phase Shift Full Bridge Zero-Voltage-Switching PWM Converter (ID:397) Jae Du La, Kang Ryul Ryu and Wang Moon Kim
15:30 – 17:00 A Virtual Platform for the Performance Analysis of the LLC Resonant Converter for Magnetron in Microwave Oven (ID:864) Jiaxin Chen, Jialei Shen, Jinghui Kong, Youguang Guo and Jianguo Zhu
15:30 – 17:00 A Design of Single Phase Converter with Active Power Factor Correction Module
37
(ID:215) Huan Zhang, Lixun Tang, Songjun Sun, Feng Jiang, Kai Yang and Dayi Li
15:30 – 17:00 Consistently Achieving Lowest Losses with Dual-Loop Finite-Settling-Step DC-to-DC Converter Control by Using Real-Time Parameter Estimation (ID:280) Hung-Yen Ou Yang and Robert Lorenz
15:30 – 17:00 Nonlinear PR Control Strategy for Cascaded H-Bridge Rectifier Based on State Feedback Linearization (ID:416) Yuwei Sun, Jiaomin Liu and Chao Fu
15:30 – 17:00 The SVPWM and PR Control for Single-phase Three-level Rectifier (ID:152) Xue Jiangyu, Guo Xinhua, Li Shaoling, Fu Jinyuan, Fang Ruiming and Li Zhongshen
15:30 – 17:00 The Study of dead-time commutation and compensation in Dual Bridge Series Resonant DC/DC Converter (ID:238) Bo Yang, Qiongxuan Ge, Lu Zhao and Zhida Zhou
15:30 – 17:00 A Novel Semiconductor Switch Test Circuit for Power Converter Optimization (ID:325) Zhicheng Guo, Guoen Cao and Yibo Wang
Session 9J: Transients and Stability of Power System
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Li Li
15:30 – 17:00 Adaptive Multi-Variable Coordinated Control and Safe Operating Characteristics for MMC under Unbalanced AC Grid (ID:160) Minglin Zhu, Guojie Li and Da Xie
15:30 – 17:00 Inertia Control of DFIG-Based Wind Turbines for Interconnected Power System Stability Enhancement (ID:883) Shuang Wang, Xiangyu Zhang and Yi Wang
15:30 – 17:00 Non-intrusive Load Identification Method Based on Residents' Behavior and Improved Discrete Optimization Algorithm of Chickens (ID:599) Yifeng Ding, Shuo Yang and Xianglong Li
15:30 – 17:00 Analysis of Voltage Variation in LVDC distribution System with Load Variability (ID:884) Philemon Mahirane, Kyung-Won Park, Jae-Hun Cha, Jea-Hun Go, Tae-Seong Choi, Jin-Hong Oh and Jae-Eon Kim
15:30 – 17:00 The Effect of Load Condition on Dynamic Response Capability of Synchronous Condenser (ID:642) Zaixun Ling, Yibo Cui, Ling Ruan, Wanli Cai, Yi Zhang and Rui Yang
15:30 – 17:00 Analysis on Recursive Discrete Fourier Transform FLL Based on Delayed Signal Cancellation-PLL Method under Frequency Variations (ID:662) Jaedo Lee and Hanju Cha
15:30 – 17:00 Frequency Control of Power System with Large Scale Wind Farm Installed by HVDC Interconnection and Battery Systems (ID:715) Takamasa Sato, Atsushi Umemura, Rion Takahashi, Junji Tamura, Yoshiharu Matsumura, Daisuke Yamaguchi, Hirooki Kudo, Masakazu Niiyama and Yasuhito Taki
15:30 – 17:00 An Improved Synchronous Reference Frame Phase-Locked Loop for Stand-Alone Variable Speed Constant Frequency Power Generation Systems (ID:650) Yi Liu, Wei Xu, Longzhang Ke and Frede Blaabjerg
15:30 – 17:00 Stability Analysis of DFIG with SWITSC Fault in Weak Network (ID:127)
38
Liling Sun, Dongxia Xing and Boqiang Xu
Conference Dinner
18:00 – 21:00 Location: Parkside 1, ICC
Monday 14 August 2017
Registration
08:00 – 17:00 Location: International Convention Centre Sydney, Australia (ICC)
Session 10: Plenary Sessions
09:00 – 11:00 Location: Cockle Bay Room 2, ICC Chair: Zi Qiang Zhu
Key Technologies of Compound-Structure Permanent-Magnet Synchronous Machines for Hybrid Electric Vehicles
Professor Ping Zheng Design Optimization of IPMSM for Electric Vehicle Propulsion in Terms of NVH Characteristics and Energy Consumption
Professor Sang-Yong Jung Medium Voltage Power Electronics in the Smart Grid Applications
Professor Po-Tai Cheng
Morning Tea Break
11:00 – 11:15 Location: ICC
Oral Sessions (11A – 11E)
Session 11A: Electric Machines Analysis and Design (D)
11:15 – 12:45 Location: Cockle Bay Room 2, ICC Chairs: Daohan Wang and Wenxiang Zhao
11:15 – 11:30 Research on a Tubular Flux-Switching Permanent-Magnet Linear Machine (ID:925) Zuosheng Yin, Yi Sui, Liang Han, Ping Zheng, Guangyuan Qiao and Yong Liu
11:30 – 11:45 Study on Electromagnetic Force Ripple Reduction of Long Stator Linear Synchronous Motor Based on Unequal Pole Pitch (ID:105) Guang Yang, Ke Wang and Zhihua Zhang
11:45 – 12:00 A Simplified Model Predictive Control to Eliminate Common Mode Voltage of an AC Motor Fed by a Neutral Point Clamped Inverter (ID:870) Muslem Uddin, Galina Mirzaeva, Graham Goodwin and Peter Stepien
39
12:00 – 12:15 Improving Magnetic Gearbox Overload Torque with Cage Rotor Bars (ID:539) Yusuf Akcay, Tom Cox and Alessandro Costabeber
12:15 – 12:30 Multi-Physics Optimization of Air-Cooled Asynchronous Induction Machines for Railway Traction Drives (ID:363) Erich Schmidt, Jan Buschbeck and Markus Vogelsberger
12:30 – 12:45 Influence Research of Rotor Structure Parameters on the Performance of IPMSM (ID:240) Jinglin Liu, Chao Gong and Zengyan Wu
Session 11B: Control in Electric Machines (D)
11:15 – 12:45 Location: Meeting Room C3.1, ICC Chairs: Essam Rashad and Xiaodong Sun
11:15 – 11:30 Control strategy of Integrated Charger base on Split-winding Switched Reluctance Motor Drive (ID:661) Jianing Liang, Zhibin Song and Weimin Li
11:30 – 11:45 Control of a High Efficiency Generator with PM Exciter Using Frequency Weight Factor (ID:331) Dong-Hee Lee, Yeongjun Jo and Jin-Woo Ahn
11:45 – 12:00 Control Strategy for Harmonic Elimination in Stand-alone Dual-Stator Brushless Doubly Fed Induction Generators with Nonlinear Loads (ID:115) Yunlei Jiang, Ming Cheng and Qingsong Wang
12:00 – 12:15 Vortex Generation and Control in Baffling Housing of a Weather Protected Motor (ID:027) Sung-Hyun Moon and Joon-Yeob Lee
12:15 – 12:30 A Bearingless Induction Motor Speed Identification Based on Sliding Mode Variable Structure-Model Reference Adaptive System (ID:446) Zebin Yang, Lin Chen, Xiaodong Sun, Weiming Sun, Jianguo Zhu and Youguang Guo
Session 11C: Sensored and Sensorless Control of Electric Machines (C)
11:15 – 12:45 Location: Meeting Room C3.2, ICC Chairs: Howard Lovatt and Wei Xu
11:15 – 11:30 A Sensorless Vector Control of Brushless Doubly Fed Machine for Stand-alone Generator System (ID:882) Meijian He, Zhongchao Wei and Xi Chen
11:30 – 11:45 Sensorless Control of Induction Motors using an Extended Kalman Filter and Linear Quadratic Tracking (ID:493) David Håland, Surya Kandukuri and Van Khang Huynh
11:45 – 12:00 Extended State Observer-based Vector Control for PMSM Drive System with Single Phase Current Sensor (ID:919) Qingfang Teng, Hongwei Cui, Junyi Duan, Jianguo Zhu, Youguang Guo and Gang Lei
12:00 – 12:15 Estimation of disturbance torque for ballscrew drive system with using high resolution encoder (ID:296) Shunsuke Noguchi and Hideo Dohmeki
12:15 – 12:30 Sensorless Direct Voltage Control of the Stand-Alone Brushless Doubly-Fed Generator (ID:303)
40
Yi Liu, Wei Xu, Fei Xiong and Frede Blaabjerg
Session 11D: Motor Drives (E)
11:15 – 12:45 Location: Meeting Room C3.4, ICC Chairs: Rukmi Dutta and Fuhong Min
11:15 – 11:30 Novel DC-Link Voltage Variation Method for Interior Permanent Magnet Synchronous Motor Drive System with High-Efficient DC-DC Converter (ID:402) Kyoung-Min Choo, Il-Kuen Won, Sung-Woo Hong, Jung-Hyo Lee and Chung-Yuen Won
11:30 – 11:45 High Gain Single Stage Buck-Boost Inverter (ID:380) Ben Zhao, Alexander Abramovitz, Ruiqing Ma and Yigeng Huangfu
11:45 – 12:00 The Control Strategy of the Nine-Switch Converter for Dual Stator Doubly Salient Electro-magnet driving system (ID:173) Liwei Shi, Jiadan Wei, Taojing Zhang and Bo Zhou
12:00 – 12:15 Calculation of Converter losses for Switched Reluctance Motor (ID:916) Ali Asghar Memon, Urooj Yasir and Mohammed Aslam Uquali
12:15 – 12:30 Synchronous Reluctance Machine with Multiphase Stator Cage Winding (ID:891) Volodymyr Bilyi, Dmytro Bilyi, Oleg Moros, Gurakuq Dajaku and Dieter Gerling
12:30 – 12:45 The research on PMSM dynamic speed control method used in the follow-up control system (ID:066) Wang Decheng and Zhou Suying
Session 11E: Applications of Electromagnetism
11:15 – 12:45 Location: Meeting Room C3.5, ICC Chairs: Xuefei Mao and Onny Setyawati
11:15 – 11:30 Electromagnetic and Thermal Design of Superconducting Fault Current Limiters for DC Electric Systems using Superconducting Cables (ID:873) Kezhen Qian, Zhuoran Guo, Yutaka Terao and Hiroyuki Ohsaki
11:30 – 11:45 Design Optimization of a Novel Electromagnetic Clutch System Based on Dynamic Analysis (ID:153) Weiguang Yu, Lei Zhang and Chenglin Gu
11:45 – 12:00 Sensorless Position Control of Novel Electromagnetic Linear Actuator for Tactile Display (ID:345) Takuya Noguchi and Astuo Kawamura
12:00 – 12:15 FEM for Sub-span Oscillation of Bundle Conductor Lines Considering Electromagnetic Forces (ID:032) Mengqi Cai, Huixiao Yang, Linshu Zhou, Zhenmao Sun and Qian Xu
12:15 – 12:30 Research on Electromagnetic Detection emission System for Spread Spectrum Code (ID:257) Yaning Han and Zhizhong Zhao
Poster Sessions (11F – 11J)
Session 11F: Electric Machine Analysis and Design (E)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC
41
Chairs: Jing Zhao
11:15 – 12:45 Electromagnetic Performance Comparison of 18-slot/26-pole and 18-slot/10-pole Fractional Slot Permanent Magnet Surface-Mounted Machines (ID:666) Yue Liu and Z.Q. Zhu
11:15 – 12:45 3-D Dynamic Simulation of an Integrated Levitation, Guidance and Propulsion System by a Superconducting Transverse Flux Linear Motor (ID:067) Zhitao Wang and Guangtong Ma
11:15 – 12:45 Design and Analysis of a Bearingless Doubly Salient Permanent Magnet Machine (ID:745) Hongyun Jia, Ming Cheng, Jianguo Zhu, Jun Cai, Yongjuan Cao and Zhou Jia
11:15 – 12:45 Characteristic analysis of the cryogenic permanent magnet synchronous motor for the submerged LNG pump (ID:748) Chao Guo, Jiabao Wang, Shoudao Huang and Yaojing Feng
11:15 – 12:45 Torque Ripple and Back EMF Harmonic Reduction of IPMSM with Asymmetrical Stator Design (ID:811) Hyun Mi Kim, Yong-Jae Kim and Sang-Yong Jung
11:15 – 12:45 Design of Interior Permanent Magnet Synchronous Machine for Torque Characteristic Improvement by Leakage Flux Reduction (ID:590) Muhammad Ayub, Hong - Soon Chang and Byung-Il Kwon
11:15 – 12:45 Design Optimization of Interior PM Starter-Generator for Aerospace Applications (ID:471) Guohao Zhang, Chaoqun Ma, Chao Xia and Kai Wang
11:15 – 12:45 Optimization Design and Analysis of Permanent magnet synchronous motor based on VC (ID:060) Haifeng Zhang, Zhi Dong and Jinghua Zhou
11:15 – 12:45 Design and Analysis of Low-Speed High Torque Direct-Driven Permanent Magnet Synchronous Machines(PMSM) with Fractional-Slot Concentrated Winding Used in Coal Mine Belt Conveyor System (ID:185) Guihou Zhou, Xiaohui Xu and Lichun Zhang
11:15 – 12:45 Model Predictive Thrust Control on Parallel-connected Double-sided Linear Induction Motor (ID:097) Xiao Sun, Liming Shi, Zhihua Zhang and Yaohua Li
Session 11G: Electric Machine Analysis and Design (F)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Shuhong Wang
11:15 – 12:45 Computational and Experimental Segregation of Deformations due to Magnetic Forces and Magnetostriction (ID:514) Sabin Sathyan, Anouar Belahcen, Ugur Aydin, Juhani Kataja, Vesa Nieminen and Janne Keränen
11:15 – 12:45 An End-Effect Equivalent Factor for back-EMF Analysis of PMSM (ID:543) Ki-Yong Nam, Sung-Ryul Hwang and Pan-Seok Shin
11:15 – 12:45 Performance Calculation for a Canned Solid-Rotor Induction Motor with Squirrel-cage (ID:593) Rui Yang, Libing Zhou, Jin Wang, Yang Xiao and Zaixun Ling
11:15 – 12:45 Fractional Order Model of Three-winding Series-connected Single-phase Motor (ID:613) Yingjie Wang, Hui Zhong and Baodong Wang
42
11:15 – 12:45 Research on the Simulation of Vacuum Arc under Low Current Interruption (ID:902) Yixiong Liu, Meng Chen, Xianjun Shao, Hai Chen, Longnv Li and Xiaoming Liu
11:15 – 12:45 Analysis of Torque and Eddy Current Characteristics for Induction Motor using Equivalent Circuit and Field Parameters (ID:712) Kang Won Lee and Young Sun Kim
11:15 – 12:45 Study on Planar Coil with Multi-Frequency Stimulations Applied to an Eddy Current Non-Destructive Testing (ID:605) Naming Zhang, Shuhong Wang, Shuya Ning and Song Wang
11:15 – 12:45 Investigation of a Novel 2-D Halbach Magnet Array for Magnetically Levitated Planar Motor (ID:849) Lu Zhang, Baoquan Kou and Yinxi Jin
11:15 – 12:45 Calculating the Transient Electromagnetic Phenomena of the Truss Bridge by Direct Lightning Strikes (ID:771) Yan Zhang, Zheng Li, Yanping Guo and Yingjun Guo
11:15 – 12:45 The Modal Analysis of the Stator of the Interior Permanent Magnet Machine (ID:594) Kang Wang, Xiuhe Wang and Mengmeng Tian
11:15 – 12:45 A New Regression Modeling Method for PMSLM Design Optimization Based on K-Nearest Neighbor Algorithm (ID:339) Juncai Song, Fei Dong, Jiwen Zhao, Jing Zhao, Zhe Qian and Qian Zhang
Session 11H: Electric Machine Analysis and Design (G)
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Ricardo Aguilera Echeverria
11:15 – 12:45 Effect of Stator and Rotor Notches on Cogging Torque of Permanent Magnet Synchronous Motor (ID:009) Guang Ma, Guoli Li, Rui Zhou, Lufeng Ju, Xiwen Guo and Fang Xie
11:15 – 12:45 Joint Temperature Prediction Method for Segment-powered Linear Motor with Working Condition Based on Nonlinear Autoregressive with Exogenous Input Neural Network (ID:536) Teng Teng, Zhao Zhi-Hua, Ma Wei-Ming, Liu Jinli and Duan Yaoqiang
11:15 – 12:45 Comparison of Torque Characteristic between Two Transverse Flux Motors with Passive External Rotor Structure (ID:255) Baoquan Kou, Xiaobao Yang, Jun Luo, Yiheng Zhou and He Zhang
11:15 – 12:45 Rotor Strength Analysis for Stator-Permanent Magnet Electrical Machines (ID:750) Changsheng Zhu and Liangliang Chen
11:15 – 12:45 Design and Characteristic Analysis of High-Speed High Temperature Superconducting Maglev Train (ID:607) Lie Jun Ba, Jie Gang Peng and Jian Xun Jin
11:15 – 12:45 Impedance-Model-Based SSR Study considering DFIGs at Different Locations (ID:013) Xinyu Zhu and Zaiping Pan
11:15 – 12:45 Torque Ripple Mitigation of PM-assisted Synchro-Reluctance Machine : Design and Optimization (ID:213) Benjamin Gaussens, Julien Boisson, Abdenour Abdelli, Luca Favre and Davide Bettoni
43
11:15 – 12:45 A Discrete Elements Model for Ironless DC-Machines with Graphite Brushes (ID:685) Johannes Wagner and Ingo Hahn
11:15 – 12:45 Tradeoffs in High-Speed Performance Characteristics in Optimization of Saliency Ratio and Efficiency for Designing FSCW IPM Machines (ID:670) Alireza Pouramin, Mohammad Farshadnia, Rukmi Dutta and M. F. Rahman
11:15 – 12:45 Design and Analysis of a Novel Modular Six-Phase Linear Primary Permanent-Magnet Vernier Machine (ID:123) Yang Shen, Mei Kang, Jinghua Ji, Fangqun Wang and Wenxiang Zhao
11:15 – 12:45 Model Predictive Torque Control of an Open-End Winding PMSM with Reduced Computation Time (ID:559) Yixiao Luo and Chunhua Liu
Session 11I: Inverters, Matrix Converters and Control
11:15 – 12:45 Location: Cockle Bay Room 1, ICC Chairs: Ha Pham
11:15 – 12:45 A Comprehensive Study of Relationship of Two Simplified Space Vector Modulation Methods and the Application in NPC Three-level Inverters (ID:061) Xi Chen, Shenghua Huang and Bingzhang Li
11:15 – 12:45 Comparison of DC/DC Converters in DCM for Reducing Low-Frequency Input Current Ripple of Single-Phase Two-Stage Inverters (ID:839) Dylan Lu
11:15 – 12:45 Implementation of Random SVPWM Strategy for Three-Phase Voltage Source Inverter Based on FPGA (ID:323) Tianyu Pu, Feifei Bu, Wenxin Huang and Lin Zhu
11:15 – 12:45 Analysis on Harmonic Characteristic of the Input Current in Indirect Matrix Converter (ID:093) Yang Mei, Lisha Chen and Shanshan Wang
11:15 – 12:45 Effects of Input Filter Designing and Input Voltage Measurement on Stability of Direct Matrix Converter (ID:740) Zahra Malekjamshidikhanehzenyani and Mohammad Jafari
11:15 – 12:45 Design and Analysis of Protection Circuits for Safe Operation of Direct Matrix Converters (ID:741) Zahra Malekjamshidikhanehzenyani and Mohammad Jafari
11:15 – 12:45 A Simplified DQ Current Controller for Single-Phase Grid-connected Inverters with LCL Filters (ID:182) Bingzhang Li, Shenghua Huang and Xi Chen
11:15 – 12:45 The reduction of zero-sequence voltage for open-end winding asynchronous motor driver with dual inverter (ID:196) Le Wang, Wenxin Huang and Feifei Bu
11:15 – 12:45 A study on Low-profile DC-DC Converter Module by Applying Electromagnetic Induction type Wireless Power Transmission and Bluetooth Feedback Controller (ID:499) Yongman Gil, Taeyoung Ahn, Gwichiol Park and Soonsang Hwang
Session 11J: Renewable Energy Applications
11:15 – 12:45 Location: Cockle Bay Room 1, ICC
44
Chairs: Jianguo Zhu
11:15 – 12:45 Piezoelectric Energy Harvesting From Vortex Induced Vibration Using a Modified Circular Cylinder (ID:549) Feifei Pan, Zhike Xu, Peng Pan and Long Jin
11:15 – 12:45 Study of Earth Fault Protection System for Substation of Battery Powered Railway Vehicle (ID:556) Kenichi Yamamori and Yuta Tanaka
11:15 – 12:45 A DC-Type Dynamic Voltage Restorer Based on Hybrid Energy Storage (ID:924) Xiao Dong Liu, Jian Xun Jin, Xiao Yuan Chen and Jie Gang Peng
11:15 – 12:45 Calculation of Motor Electromagnetic Field for Flywheel Energy Storage System in Discharge Mode (ID:551) Lin Li, Weili Li, Dong Li, Jinyang Li, Jiafeng Shen, Yu Fan and Purui Wang
11:15 – 12:45 Enhancement of Transient Stability of Synchronous Generators Using Kinetic Energy of Variable Speed Wind Generators (ID:128) Masaki Yagami, Yoshihiro Ichinohe, Yohichiro Kojima, Kenji Misawa and Junji Tamura
11:15 – 12:45 A Novel Method to Avoid Degradation Due to Demagnetization of Linear PM Generators for Oceanic Wave Energy Extraction (ID:803) Omar Farrok, Md. Rabiul Islam, Md. Rafiqul Islam Sheikh, Youguang Guo, Jianguo Zhu and Gang Lei
11:15 – 12:45 Investigation of a Doubly Salient Halbach Array Linear Permanent Magnet Machine for Wave Energy Converters (ID:845) Mohammad Abdul Hakim Raihan, Nick Baker, Kristopher Smith and Ahmed Almoraya
11:15 – 12:45 A comparative study of modified swarm intelligence based algorithms for solving multi-objective optimal power flow incorporating wind power and load uncertainties ( ID: 927) Isaree Srikun and Budhapon Sawetsakulanond
Lunch Break
12:45 – 13:45 Location: ICC
Oral Sessions (12A – 12E)
Session 12A: Linear Machines
13:45 – 15:15 Location: Cockle Bay Room 2, ICC Chairs: Xiangdong Liu and Jing Zhao
13:45 – 14:00 Investigation of a Novel Hybrid Radial and Axial Magnetic Circuit Permanent Magnet Motor with Flux Weakening Capability for EVs (ID:349) Daohan Wang, Chunlei Shao and Xiuhe Wang
14:00 – 14:15 Thrust Ripple Reduction of a Five-Phase Double-Sided C-Core Modular Linear Permanent-Magnet Synchronous Machine (ID:104) Xiangdong Liu, Keyu Guo, Jing Zhao, Zhen Chen and Hao Chen
14:15 – 14:30 Design and Control Optimization of Linear Induction Motor Drive for Efficiency Improvement (ID:570) Dong Hu, Wei Xu, Gang Lei and Jianguo Zhu
45
14:30 – 14:45 Force Ripple Reduction of a Linear Flux Switching Motor with Segmented Secondary (ID:351) Daohan Wang, Xingfei Du and Xiuhe Wang
14:45 – 15:00 Comparative Study and Optimal Design of Alternative PM Configuration Transverse Flux Linear Machine (ID:350) Shaohong Zhu, Tom Cox, Chris Gerada and Zeyuan Xu
Session 12B: Losses and Thermal Management of Electric Machines (C)
13:45 – 15:15 Location: Meeting Room C3.1, ICC Chairs: Yves Perriard and Zhuoran Zhang
13:45 – 14:00 FEA Based Analysis on Effect of Slot Pole Combination on Motor Torque and Magnet Eddy Current Loss With Bonded NdFeB Halbach Rotor (ID:258) Amit Jha, Afef Kedous-Lebouc, Lauric Garbuio, Jean-Paul Yonnet and Jean-Marc Dubus
14:00 – 14:15 Dual-Inverter Counteracting PWM Schemes for Iron Loss Reduction in Twin-Coil Induction Motors (ID:384) Jian-Xin Shen, Zhi-Cheng Sun, Gui-Yu Zhou, Wei Sun and Meng-Jia Jin
14:15 – 14:30 Extra End Effect of Axially Segmented Stator Core of High Speed High Power Permanent Magnet Electric Machines (ID:389) Yi Sun and Jian-Xin Shen
14:30 – 14:45 Effect of AC Losses on Temperature Rise Distribution in Concentrated Windings of Permanent Magnet Machines with Parallel Strands (ID:357) Xinggang Fan, Dawei Li, Ronghai Qu, Cong Wang and Canruo Chen
14:45 – 15:00 Core Loss Measurement Under Elliptical Loci of Magnetic Flux Density (ID:320) Ashraf Rohanim Asari, Youguang Guo and Jianguo Zhu
Session 12C: Optimization of Electric Machines (B)
13:45 – 15:15 Location: Meeting Room C3.2, ICC Chairs: Yunkai Huang and In-Dong Kim
13:45 – 14:00 Validation by Measurements of a Windage Losses Model for Very-High-Speed Machines (ID:505) Guillaume Burnand, Douglas Martins Araujo, Christian Koechli and Yves Perriard
14:00 – 14:15 Multi-Objective Optimization Algorithm of A Magnetic Field Modulation Motor Based on Advanced Differential Evolution (ID:304) Tonghao Pei, Dawei Li, Ronghai Qu, Manoj Shah and Peiyu Zhang
14:15 – 14:30 Rotor Design and Optimization of the Single-phase Line-start Synchronous Reluctance Motor (ID:225) Kang Tang, Libing Zhou, Jin Wang, Yang Xiao and Shuanghong Wang
14:30 – 14:45 Multilevel Design Optimization Method for Permanent Magnet Motors (ID:677) Gang Lei, Chengcheng Liu, Youguang Guo, Jianguo Zhu and Yanbin Li
14:45 – 15:00 Integrated Design of 10MW High Speed Solid Rotor Induction Motor Based on Multi-Physics Fields Analysis (ID:404) Rui Huan Cai, Li Han, Guang Hou Zhou and Chao Fan Shen
46
Session 12D: Wireless Power Transfer (B)
13:45 – 15:15 Location: Meeting Room C3.4, ICC Chairs: Ruiwu Cao and Kyu-Tae Kim
13:45 – 14:00 New Design Concept of a Bidirectional Wireless Power Transfer System using Dual Active Bridge Topology (ID:904) Ha Pham
14:00 – 14:15 Design of a Temperature Transmitter with Contactless Power and Data Transmission (ID:467) Xi-Wen Li, Jian-Xin Shen, Wei Sun and Zhenfeng Zhong
14:15 – 14:30 Surface Spiral Parallel and Antiparallel Winding Designs for Low Spatial Voltage Stress, High Efficiency, Inductive Wireless Power Transfer Systems (ID:084) Guangqi Zhu and Robert D. Lorenz
14:30 – 14:45 Optimal Charging Method for Mismatched Transceiver Coils in Wireless Power Transfer (ID:287) Jing Zhou, Yuqing Gao, Chenxi Zhou, Jien Ma, Xiaoyan Huang and Youtong Fang
14:45 – 15:00 A Medium-Voltage Motor Drive Based on Diode-clamped Modular Multilevel Converters (ID:187) Tong Zheng, Congzhe Gao, Xiaozhong Liao, Xiangdong Liu, Baiyan Sun and Jingliang Lv
Session 12E: Photovoltaics
13:45 – 15:15 Location: Meeting Room C3.5, ICC Chairs: Guoen Cao and Benjamin Gaussens
13:45 – 14:00 Parameter Identification of Simplified Engineering Model for PV Array Based on Shuffled Frog Leaping Algorithm (ID:037) Yan Xu, Zhao Gao and Xiaorong Zhu
14:00 – 14:15 Economic Optimization of Hybrid PV-Battery Systems Using Hourly Satellite Insolation and Daily Temperature Data: A Case Study (ID:230) Jeremy Every, Li Li and David Dorrell
14:15 – 14:30 Parameter Identification of Photovoltaic Cell Based on Improved Least Square Method (ID:049) Yan Xu, Weijia Jin and Xiaorong Zhu
14:30 – 14:45 Research on Parameter Identification of Photovoltaic Array Based on Measured Data (ID:050) Yan Xu, Zhao Gao and Xiaorong Zhu
14:45 – 15:00 An Improved Coordinated Control Strategy for PV System Integration with VSC-MVDC Technology (ID:234) Wenxun Li, Yanbo Che, Xialin Li, Jinhuan Zhou, Gengji Wang, Shengnan Li and Xinze Xi
15:00 – 15:15 Distributed Series Direct Current System for Electricity Collection, Voltage Promotion and Grid Access of Large-scale Photovoltaic Station (ID:448) Yibo Wang, Honghua Xu and Changbin Ju
47
Poster Sessions (12F – 12J)
Session 12F: Control in Electric Machines (E)
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Jia Xin Chen
13:45 – 15:15 Deep Flux Weakening Control with Six-Step Overmodulation for a Segmented Interior Permanent Magnet Synchronous Motor (ID:890) Jian Li, Sithumini Ekanayake, Fazlur Rahman, Rukmi Dutta, Xiaoyan Huang, Jien Ma and Youtong Fang
13:45 – 15:15 Performance of Runge-Kutta family numerical solvers for calculation of transient processes in AC machines (ID:279) Olga Korolova, Michael Popp, Wolfgang Mathis and Bernd Ponick
13:45 – 15:15 Torque Ripple Reduction of Permanent-Magnet Synchronous Motors Based on Predictive Sequence Control (ID:254) Chen Li, Changliang Xia, Zhanqing Zhou, Yan Yan and Tingna Shi
13:45 – 15:15 Online Inductance Estimation of PMSM based on the Current Derivative Measurement (ID:876) Xuan Minh Bui and Faz Rahman
13:45 – 15:15 Load characteristics-oriented Control Strategy for Air Conditioners during Voltage Sags (ID:459) Qin Wang, Huan Yang, Rongxiang Zhao and Haibing Wang
13:45 – 15:15 Research on the Influence of Time Delay on Fundamental Flux Controllable Reactor (ID:038) Tianbao Yu, Dayi Li and Liwen Ye
13:45 – 15:15 Novel Nonsingular Terminal Sliding Mode Variable Structure Control for a Bearingless Induction Motor (ID:449) Zebin Yang, Dan Zhang, Xiaodong Sun, Weiming Sun, Jianguo Zhu and Youguang Guo
13:45 – 15:15 Research on Harmonic Current Suppression Technology of Permanent Magnet Synchronous Motor Based on Surrogate Model (ID:615) Guangwei Liu, Yan Zhang, Shi Jin and Fengge Zhang
13:45 – 15:15 Uncontrollable Phenomenon and Digital Control Delay Analysis for High-Speed Permanent Magnet Synchronous Motor Drive (ID:744) Cong Gu, Xiaolin Wang and Zhiquan Deng
13:45 – 15:15 An Optimal Design of an AFPMSM using Analytical Approach and Particle Swarm Optimization (ID:318) Junxian Qu, Yunkai Huang, Baocheng Guo, Hui Yang and Shuhua Fang
13:45 – 15:15 Tubular Permanent Magnet Linear Machine Using Transverse-Flux Flux-Reversal Topology (ID:477) Dingfeng Dong, Wenxin Huang, Feifei Bu and Qi Wang
13:45 – 15:15 Direct Thrust Control for Five-Phase Tubular Linear PM Motor Based on Third-Harmonic Current Suppression (ID:231) Xu Huang, Guohai Liu, Huawei Zhou and Jinghua Ji
Session 12G: Control in Electric Machines (F)
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Qingfang Teng
48
13:45 – 15:15 Analysis and Investigation on the Behavior and Performance of Single Phase Grid Connected Induction Generators System (ID:547) Nuttapong Prapurt, Budhapon Sawetsakulanond and Vijit Kinnares
13:45 – 15:15 An Optimal Switching Table for PMSM DTC System Using Zero Voltage Vector (ID:707) Yaohua Li, Yafei Qu, Haohao Shi and Xiangzhen Meng
13:45 – 15:15 Performance Improvement for a FMPM in-Wheel Motor Based on DB-DTFC with a New Current Observer (ID:155) Ying Fan, Wusen Wang, Qiushi Zhang and Ling Li
13:45 – 15:15 Research on An Improved Virtual Flux Droop Control Method with Better Dynamic and Static Performance (ID:221) Aimeng Wang, Jia Zhang and Jianguo Zhu
13:45 – 15:15 Examining the Unstable Behaviour of a Phenomenological Three Dimensional, Dipole-Based Hysteresis Model (ID:392) Johannes Wagner, Christoph Hittinger and Ingo Hahn
13:45 – 15:15 Development of a Network with Double Level Communication Used in Motor-Driven Spindle Spinning Frame (ID:856) Jiaxin Chen, Cheng Qian, Youguang Guo and Jianguo Zhu
13:45 – 15:15 Comparative Analysis of Pulsating Torque Reduction Methods of Variable Flux Reluctance Machines for Electric Vehicles (ID:284) Yang Liu, Jinjun Yin, Bo Gong and Gao Yang
13:45 – 15:15 The Analysis of the Influences of Switching Opportunity for a Novel 6/8 Pole Changing Line-Start Permanent Magnet Synchronous Motor (ID:145) Mengmeng Tian, Xiuhe Wang and Daohan Wang
13:45 – 15:15 The proposition of torque ripple estimation method in the d, q-axis voltage equation (ID:765) Gyu-Hwa Gim, Gyu-Won Cho, Ki-Bong Jang, Gyu-Tak Kim and Heung-Kyo Shin
13:45 – 15:15 Comparison of Direct-Drive Permanent-Magnet Synchronous Motor and Permanent-Magnet Flux-Modulated Motor for Electric Vehicles (ID:022) Yuanzhe Wang, Yinyin Li, Xiaoyan Huang, Youtong Fang and Jien Ma
13:45 – 15:15 Influence of Elementary Model Parameter Variations on Simulated Ferromagnetic Hysteresis Using a Ring-Shaped 3D Dipole Collective (ID:051) Christoph Hittinger, Johannes Wagner and Ingo Hahn
13:45 – 15:15 Sequential Multiobjective Optimization Method for Electromagnetic Inverse Problems (ID:277) Yanbin Li, Gang Lei and Lei He
Session 12H: Control and Multilevel Inverters
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Dan Sun
13:45 – 15:15 Single-Phase Five-Level Buck-Boost Inverter (ID:479) Hoan-Tien Luong, Minh-Khai Nguyen, Youn-Ok Choi, Geum-Bae Cho and Myoung-Han Yoo
13:45 – 15:15 Finite-State-Machine Model of Boundary Control for Dual-Active-Bridge Converter (ID:541) Renzhi Duan, Liqiang Yuan, Qing Gu and Zhengming Zhao
13:45 – 15:15 Strong parameters robustness model predictive current control method (ID:592) Xiaoguang Zhang and Liang Zhang
49
13:45 – 15:15 A Suppression Method of The Low Frequency Fluctuation of The Neutral Point Potential under 3-Level SHEPWM based on 3-Order Harmonic (ID:430) Bo Guan and Shinji Doki
13:45 – 15:15 Analysis and Performance of Two Dual Random SVPWM for Five-phase Inverter (ID:236) Lin Zhu, Feifei Bu, Wenxin Huang and Tianyu Pu
13:45 – 15:15 Control of Ultra-high Switching Frequency Converters using Virtual-flux based Direct Power Control (ID:083) Milad Golzar, Van Khang Huynh and Alf Magne Midtbø Versland
13:45 – 15:15 A Seven Level Switched Capacitor Multilevel Inverter with Asymmetric Input Sources for Microgrids (ID:110) Raghu Raman S., Ka Wai Eric Cheng and Jiefeng Hu
13:45 – 15:15 Neutral point Voltage Feedback Control Based on Double Modulation Wave Carrier-based PWM for Three-level Converters (ID:004) Luyao Xie, Feng Wen, Youbing Zhang, Gouqing Weng and Jun Qi
13:45 – 15:15 A Novel Gate Driver for High Speed Turn-on Switching of Ultra-low Feedback Capacitance SiC-VJFET (ID:108) Naoto Kikuchi, Tsuyoshi Ishikawa, Koji Yano and Yasunori Tanaka
13:45 – 15:15 Modified Carrier-Based Over-Modulation Technique for Improved Switching Performance of Multilevel Converters (ID:806) Md. Ashib Rahman, Md. Rabiul Islam, Youguang Guo, Jianguo Zhu and Gang Lei
Session 12I: Power Electronics in Power System Applications
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Ricardo Aguilera Echeverria
13:45 – 15:15 Study on the Closing State of High Voltage Disconnectors Based on the Modal Analysis (ID:435) Chao Bian, Yuqi Zhou, Weimin Guan, Jinggang Yang and Zhike Xu
13:45 – 15:15 Single-Phase To Three-Phase Converter with APF in House-Service Power Supply of Traction Substation (ID:553) Xu Peng, Xiaoqiong He and Xiaolan Lin
13:45 – 15:15 Analysis of Economical Replacement Cycle Considering Maintenance and Condition change of Power Transformers (ID:302) Jang Kyeong-Wook and Shon Jin-Geun
13:45 – 15:15 Time Domain Analysis and Efficiency Research of High Voltage Power Supply for Electron Beam Welder Based on LCC Resonance in DCM (ID:249) Shengwen Fan, Haisi Li, Zeting Wang and Yiqin Yuan
13:45 – 15:15 Control strategy for dual active bridge based DC solid state transformer (ID:417) He Sun, Jiancheng Zhang and Chao Fu
13:45 – 15:15 On-Load Automatic Voltage Regulation System Designed via Thyristor for Distribution Transformer (ID:070) Hongzhong Ma, Suwen Gu, Huafang Wang, Honghua Xu, Chunning Wang and Hao Zhou
13:45 – 15:15 Research on Short-circuit Force of Power Transformer Windings Considering Residual Stress (ID:352) Huan Wang, Yan Li, Bo Zhang and Yongteng Jing
13:45 – 15:15 Design and Research of Shared DC Bus of Converters (ID:604) Chuang Dong, Chun-Yi Zhu, Chong-Jian Li and Xiao Huang
13:45 – 15:15 A Novel Time Expansion Method to Cope with Simulator Delay in the Hardware-
50
In-the-Loop Study of Hysteresis Current Control (ID:012) Honglin Zhou, Xiao Tian Wu and Tongzhen Dai
13:45 – 15:15 Power Electronic Zigzag Transformer for Experimental Voltage Generator (ID:528) Chunpeng Zhang, Qingru Qi, Yu Shen, Qirong Jiang and Zhengming Zhao
Session 12J: Microgrids (Power System) (B)
13:45 – 15:15 Location: Cockle Bay Room 1, ICC Chairs: Yam Siwakoti
13:45 – 15:15 Multi-agent Systems Using Model Predictive Control for Coordinative Optimization Control of Microgrid (ID:533) Shanna Luo, Changbin Hu, Rui Ma, Liang Meng and Yongchang Zhang
13:45 – 15:15 Voltage Compensation Strategy Using Adaptive Virtual Impedance for Reactive Power Sharing in an Islanded Microgrid (ID:840) Shirong Liu and Yao Zhang
13:45 – 15:15 An Adaptive Droop Control Strategy of Energy Storage Control for Microgrid with Wind Power and Energy Storage Systems (ID:419) Haoling Xu and Zaiping Pan
13:45 – 15:15 A Power Flow Control Strategy of a Constant-speed Microturbine-generation based Series Hybrid Power System (ID:409) Hongyang Li, Xuhui Wen and Youlong Wang
13:45 – 15:15 Fast Identification of Active and Reactive Current Component for Single Phase Grid Interconnection (ID:815) Samir Gautam, Dylan Lu, Yuezhu Lu and Weidong Xiao
13:45 – 15:15 Reactive Power Optimization of Low Voltage Distribution Network Based on Improved particle swarm optimization (ID:072) Shengyu Gao, Huafang Wang, Chunning Wang, Suwen Gu, Honghua Xu and Hongzhong Ma
13:45 – 15:15 Frequency Control of Small Power System with Wind Generators Installed By Using DFIG Based Diesel Generator (ID:716) Kazuhito Suzuki, Atsushi Umemura, Rion Takahashi, Junji Tamura and Noriaki Hino
13:45 – 15:15 Harmonic Voltage Control for Five-Phase Induction Generator System With Direct Torque Control (ID:058) Haijun Xu, Wenxin Huang and Feifei Bu
13:45 – 15:15 Adaptive Virtual Inertia Control for DC Microgrid with Variable Droop Coefficient (ID:423) Chen Wang, Jianhui Meng, Yi Wang and Hui Wang
13:45 – 15:15 Multi-Source Coordinated Control Strategy Based the Battery SOC for Islanded DC Microgrid (ID:603) Peigen Zou, Jianhui Meng, Chen Wang and Yi Wang
Afternoon Tea Break
15:15 – 15:30 Location: ICC
51
Oral Sessions (13A – 13E)
Session 13A: Microgrids (Power Electronics)
15:30 – 17:00 Location: Cockle Bay Room 2, ICC Chairs: Gao Congzhe and Mi-Ching Tsai
15:30 – 15:45 Bi-directional Converter for Interfacing Electrical Appliances with HFAC Enabled Power Distribution Systems in Critical Applications (ID:833) Anand Fernando and Dylan Lu
15:45 – 16:00 Accurate Copper Loss Analysis of a Multi-winding High-frequency Transformer for a Magnetically-coupled Residential Micro-grid (ID:767) Mohammad Jafari, Zahra Malekjamshidi and Jianguo Zhu
16:00 – 16:15 The Control of a Three-phase Four-leg Grid-connected Inverter During Asymmetrical Fault (ID:676) Gao Fengyang
16:15 – 16:30 Power Management and Control Strategy for Hybrid AC/DC Microgrids in Autonomous Operation Mode (ID:749) Mohammad Abuhilaleh, Li Li, Jianguo Zhu and Mahmuda Begum
16:30 – 16:45 A Novel Small Signal Model of Multi-Bus Microgrids for Modeling Interaction of Droop Controllers through the Power Network (ID:043) Mohsen Eskandari and Li Li
16:45 – 17:00 Research of Microgrid Connecting Interface Based on Multi-port Power Electronic Transformer (ID:517) Wei Li, Hong Fan and Shouzhen Zhu
Session 13B: Fault and Protection of Power System
15:30 – 17:00 Location: Meeting Room C3.1, ICC Chairs: Khang Huynh and Erich Schmidt
15:30 – 15:45 A Fault-aware Low-power-dissipation Dynamic Mapping Algorithm Based on NoC (ID:169) Shuyan Jiang, Jian Zhou, Zhi Lu, Letian Huang, Chao Wu, Gang Luo, Qi Li and Guoming Song
15:45 – 16:00 Research on the defects in the field Installation of Insulated Tubular Bus-bar and its test method (ID:842) Zhu Sirui, Ruan Ling, Xiang Ren, Wenpei Li and Bin Xiang
16:00 – 16:15 Towards Online Bearing fault detection using Envelope Analysis of vibration signal and Decision Tree Classification Algorithm (ID:328) Jagath Sri Lal Senanayaka, Khang Huynh and Kjell G. Robbersmyr
16:15 – 16:30 Numerical Calculation of the End Region of Large Air-Cooled Turbo-Generator Under the Single-phase Earth Fault (ID:531) Purui Wang, Weili Li, Yong Li, Ying Su, Dong Li, Jianjun Zeng, Jinyang Li and Jiafeng Shen
16:30 – 16:45 Research on Sheath Development of Vacuum Circuit Breaker Based on Continuous Transition Model (ID:903) Yixiong Liu, Yunfei Huang, Deen Yu, Hai Chen, Longnv Li and Xiaoming Liu
16:45 – 17:00 Optimization Design and Application of Converter Parameters of DC Vacuum Circuit Breaker (ID:901) Yixiong Liu, Xiaohan Zhan, Renfeng Li, Hai Chen, Longnv Li and Xiaoming Liu
52
Session 13C: Microgrids (Power System) (C)
15:30 – 17:00 Location: Meeting Room C3.2, ICC Chairs: Zhen Li and Katsumi Yamazaki
15:30 – 15:45 Distributed Secondary Voltage Regulation for Autonomous Microgrids (ID:848) Mahmuda Begum, Mohammad Abuhilaleh, Li Li and Jianguo Zhu
15:45 – 16:00 New Energy Management Approach in Distribution Systems Considering Energy Storages (ID:308) Ali Azizivahed, Sahand Ghavidel, Mojtaba Jabbari Ghadi, Li Li and Jiangfeng Zhang
16:00 – 16:15 Simplified Model of Multi-port Energy Router in 10kV Distribution Network (ID:177) Shuxian Yi, Liqiang Yuan, Xing Weng and Zhengming Zhao
16:15 – 16:30 Active Stabilization Control Strategy for Storage System Paralleled with Constant Power Loads (ID:525) Xinbo Liu, Yawei Bian and Shengwen Fan
16:30 – 16:45 Distributed Control for Economic Dispatch Problem in Microgrid (ID:418) Changbin Hu, Li Ding, Feiran Wang, Shanna Luo, Kaiyu Chen and Hu Zhang
16:45 – 17:00 Impact of Using Current Limiting Reactor on the Existing Circuit Breakers in Micro-Grids (ID:239) Ali Khademlahashy, Gaurang Mehta, Li Li and Jianguo Zhu
Session 13D: Renewable Energies
15:30 – 17:00 Location: Meeting Room C3.4, ICC Chairs: Huang Shoudao and Masaki Yagami
15:30 – 15:45 Risk-Constrained Offering Strategies of a Price-Maker Demand Response Aggregator (ID:566) Mohammad Hossein Abbasi, Amin Rajabi, Mehrdad Taki and Li Li
15:45 – 16:00 Minimization of Building Energy Cost by Optimally Managing PV and Battery Energy Storage Systems (ID: 759) Rama K. Bonthu, Ha Pham, Ricardo P. Aguilera and Quang P. Ha
16:00 – 16:15 Control Strategy based on Virtual Synchronous Generator of DFIG-Based Wind Turbine under Unbalanced Grid Voltage (ID:808) Yingzong Jiao, Heng Nian and Guoqing He
16:15 – 16:30 Research on a Field Modulated Linear Generator for wave energy conversion (ID:425) Lei Huang, Minshuo Chen, Minqiang Hu and Fuchang Yue
16:30 – 16:45 Control Strategy of Direct-drive Wave Energy Conversion System Based on Biological Intelligent Control Algorithm (ID:831) Zhenggang Yu, Ming Fu, Chen Wang, Minshuo Chen and Lei Huang
Session 13E: Online monitoring, Measurement and Analysis
15:30 – 17:00 Location: Meeting Room C3.5, ICC Chairs: Heyun Lin and Yujiao Zhang
15:30 – 15:45 Design and Analysis of a Halbach Arc Linear Permanent Magnet Machine for
53
Large Telescope Application (ID:107) Haitao Wang, Shuhua Fang, Hui Yang, Heyun Lin, Yibo Li, Keyi Wang and Huimin Li
15:45 – 16:00 Study of Turbidity Analysis System Using Optical Devices (ID:247) Han-Byeol Oh, Ji-Sun Kim, Jin-Young Baek and Jae-Hoon Jun
16:00 – 16:15 Structure Optimization Design for 1000kV UHV Shield Ring Considering Fatigue Fracture (ID:138) Lan Jiang, Yujiao Zhang, Qi Yang, Li Zhi and Ziheng Pu
16:15 – 16:30 A Review on Clustering of Residential Electricity Customers and Its Applications (ID:194) Amin Rajabi, Li Li, Jiangfeng Zhang and Jianguo Zhu
16:30 – 16:45 Condition Monitoring of Power Electronic Converters in Power Plants-A Review (ID:651) Sai Srinivas Manohar, Animesh Sahoo, Aravinth Subramaniam and Sanjib Kumar Panda
16:45 – 17:00 Fault Diagnostic Techniques for Induction Machines through Finite Element Analysis (ID:625) Aravinth Subramaniam, Animesh Sahoo, Sai Srinivas Manohar and Sanjib Kumar Panda
Poster Sessions (13F – 13J)
Session 13F: Converters, Control and Applications
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Jiangfeng Zhang
15:30 – 17:00 An Improved Model-Free Predictive Current Control of PWM Rectifiers (ID:739) Yongchang Zhang and Jie Liu
15:30 – 17:00 A Study on Novel Active Clamp Snubber Applied DC-DC Quasi Resonant Flyback Converter to Effectively Reduce Switch Voltage Surge (ID:515) Jeong Sang Yoo, Taeyoung Ahn, Gyeongbu Yu, Jongmin Lee and Jaehak Lee
15:30 – 17:00 Generalized Space Vector PWM Technique for Multiphase Current Source Inverters (ID:411) Sherif M. Dabour, Mahmoud F. El-Morshedy and Essam Eddin Rashad
15:30 – 17:00 Comparison of Current Source Rectifier and Inverter Topologies of Induction Heating Power Supply for Forging Applications (ID:809) Seung-Soo Choi, Chang-Woo Lee, In-Dong Kim, Jang Han Jung and Dong Hoan Seo
15:30 – 17:00 Experimental Verification of Buck-boost Converter based Micro Inverter for Minimization of Magnetic Components (ID:869) Yuichi Noge, Masamichi Yamaguchi, Mitsuru Miyashita and Mingcong Deng
15:30 – 17:00 Energy Balanced Design and Control for Converters with Natural Trajectory Tracking (ID:047) Shi Bingqing, Zhao Zhengming, Li Jing and Yuan Liqiang
15:30 – 17:00 A Study of a Head-up Display Consisting of Multiple Virtual Image Windows (ID:889) Yongseok Chi
15:30 – 17:00 Analysis on Reliability Characteristics of Power Electronic Devices for Aerial Vehicles (ID:706)
54
Myungchin Kim, Sungwoo Bae and Seung H. Choung 15:30 – 17:00 Stability Analysis of Voltage Sampling Circuits applied to Switching Mode Power
Supply with Fully-immersed Evaporative Cooling (ID:388) Yingke Wen and Lin Ruan
Session 13G: Cables, Transformers and Transmission in Power System
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Li Li
15:30 – 17:00 Thermal Simulation of Fully-immersed Evaporative Cooling Switching Mode Power Supply (ID:390) Yingke Wen and Lin Ruan
15:30 – 17:00 Fault Diagnosis of Power Transformer Using Confidence Weight based Fusion Method (ID:069) Jae Yoon Lim, Dae Jong Lee and Pyeong Shik Ji
15:30 – 17:00 Uncertainty Propagation in Successive Step-up Measurements of DC High Voltage and Current up to 200 kV and 4000 A (ID:669) Kyu-Tae Kim, Jae Kap Jung and Hyung-Kew Lee
15:30 – 17:00 Study on Temperature Field Modeling and Operation Optimization of Soil Buried Double-circuit Cables (ID:071) Peifeng Shen, Xiangqi Guo, Mingxing Fu, Hongzhong Ma, Yongqiang Wang and Qiang Chu
15:30 – 17:00 A New Calculation Method for Fault Transient Expression of Ring DC Systems (ID:433) Yuan Fu, Jingyan Liu, Yan Xu, Yi Wang and Xiangyu Zhang
15:30 – 17:00 Influence of HTS DC Cable Capacitance on Harmonics in HVDC Transmission System (ID:612) Zheng Hua Chen, Jie Gang Peng and Jian Xun Jin
15:30 – 17:00 Simulation of the Effect of Bubble Defect on the distribution of Electric Field in Epoxy Resin Pouring Type Insulated Tubular Bus-bar (ID:792) Li Wenpei, Ren Xiang, Ruan Ling and Zhu Sirui
15:30 – 17:00 Power Cable Core Temperature Retrieval with Uncertain Parameters Identification of Calculation Models (ID:906) Li Zhou, Ying Peng, Jing Li, Jun Ma, Xiongfeng Huang and Yujiao Zhang
15:30 – 17:00 Current Distribution Analysis for a Multilayer High-Tc Superconducting Cable Considering Magnetic Hysteresis (ID:797) Nana Duan, Ze Guo, Shushu Feng, Weijie Xu, Shuhong Wang, Youguang Guo and Jianguo Zhu
15:30 – 17:00 Comparative Analysis of Different Cable of Electromagnetic Arresting Gear (ID:727) Xiaoxu Zhang, Weiming Ma and Yuxing Zhang
Session 13H: Electrical Systems Studies
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Wei Xu
15:30 – 17:00 The Design and Simulation of a Teaching Virtual Platform by Combining LabVIEW and Simulink for Undergraduates of Electrical Engineering (ID:300) Wenjuan Hao, Hui Liu and Yu Wang
55
15:30 – 17:00 A DSP Teaching Example based on Simulink for Undergraduates of Electrical Engineering (ID:673) Wenjuan Hao, Hui Liu and Yu Wang
15:30 – 17:00 Research of Efficient FEM Algorithm With Precise and Parallel Computing (ID:917) Haiwen Feng, Xiaoming Liu, Lianqiang Niu and Qi Wu
15:30 – 17:00 The teaching Reform on the “Electrical Machinery”Course Offered to the "Excellence Engineer" Class (ID:366) Junqing Li and Tianyu Shi
15:30 – 17:00 The Research on the Response Surface-Geometric Feature Charge Simulation Method (ID:905) Wu Qi, Liu Xiaoming, Yang Tian, Feng Haiwen, Li Longnv and Zhu Gaojia
15:30 – 17:00 Measurement and Analysis of UHV Transformer Noise with Sound Intensity and Vibration Method (ID:920) Zhumao Lu, Tianzheng Wang, Hua Yu, Zhipeng Wang, Chao Zhang, Cailian Li and Guoqiang Liu
15:30 – 17:00 Noise Analysis of UHV Power Transformer and Research on Active Noise Reduction System (ID:921) Tianzheng Wang, Bian Qiu, Zhumao Lu, Lu Bai, Chao Zhang, Cailian Li, Zhengwu Xia and Guoqiang Liu
15:30 – 17:00 Comparative Analysis of 3-D Magnetic Field for Axial Magnetic Field Vacuum Interrupter Contact with Different Iron Core Structure (ID:922) Yunfei Huang, Xiaoming Liu, Yixiong Liu, Longnv Li and Renfeng Li
15:30 – 17:00 Development of the Performance Measurement System for UPS Product (ID:865) Xiaoqiang Yu, Jiaxin Chen, Youguang Guo and Jianguo Zhu
Session 13I: Thermal and Mechanical Analysis (B)
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Huang Ha
15:30 – 17:00 Auxiliary Power Unit with SiC Device for Railroad Car (ID:412) Yeon-Woo Choi, Pyung-Ho So, Kang Hyun Yi and Byoung-Hee Lee
15:30 – 17:00 Power Losses of Si/SiC Semiconductors in Medium Voltage Energy Router Sub-modules with Hybrid Topology (ID:753) Liqiang Yuan, Jing Li, Qing Gu, Zhengming Zhao and Yu Shen
15:30 – 17:00 Mechanical design considerations of Halbach-array rotor for a new ironless stator axial-flux PM machine (ID:755) Weiwei Geng, Zhuoran Zhang and Chen Wang
15:30 – 17:00 Intelligent circuit breaker using thermoelectric hybrid overload protection (ID:893) Sen Lv and Ming Zong
15:30 – 17:00 Research on closed loop control system of double coil contactor (ID:896) Ming Zong and Lei Wang
15:30 – 17:00 Experimental Research on Atomization Parameters in Spray Cooling System (ID:582) Shaoyan Liu, Lin Ruan, Zhenguo Li, Ying Chen and Yuhui Kang
15:30 – 17:00 The Experimental Studies on Spray Parameters in Spray Evaporatvie Cooling Motors (ID:180) Li Zhenguo
56
15:30 – 17:00 Investigation of the Heat Characteristic Based on the Exergy Destruction Rate for High Power Density Motor (ID:098) Yongming Xu, Mengmeng Ai and Dajun Tao
Session 13J: Electric Machines Applications
15:30 – 17:00 Location: Cockle Bay Room 1, ICC Chairs: Youguang Guo
15:30 – 17:00 The Key Technology to Speed Sensor-less Vector Control of Locomotive Traction (ID:343) Hu Zhang, Wensheng Wu and Tianshuo Sun
15:30 – 17:00 A Novel Strategy of Resonant Frequency Tracking Control for Linear Compressor (ID:439) Tao Zhang and Haitao Yu
15:30 – 17:00 Torque Control of Power Assisted Bike via Planetary Gear Mechanism (ID:440) Chun-Lin Chen and Mi-Ching Tasi
15:30 – 17:00 A Novel Position-Sensorless Startup Method for DSEM (ID:114) Xingwei Zhou and Bo Zhou
15:30 – 17:00 Basic study for achieving stable magnetic levitation of a steel plate irrespective of its thickness (ID:100) Toshiki Kimura, Yuki Sudo and Toshiko Nakagawa
15:30 – 17:00 Study on Dynamic Coupling Characteristics of Thrust and Levitation Force for Maglev Train (ID:106) Jian Rao and Ke Wang
15:30 – 17:00 Thermal Performance of a Flux-Switching Permanent Magnet Machine For an Integrated Starter Generator in Hybrid Electric Vehicles (ID:687) Ming Chen, Wei Hua and Guishu Zhao
15:30 – 17:00 Three-Dimensional Automatic Generation Magnetic Equivalent Circuit Using Mesh-Based Formulation (ID:269) Youcef Benmessaoud, Frédéric Dubas, Raouf Benlamine and Mickeal Hilairet
Closing Ceremony
17:00 – 17:30 Location: Cockle Bay Room 2, ICC