TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 1 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 4
SANS 19
SANS 21-2
SANS 67
SANS 105-B02
SANS 105-E01
SANS 105-E02
SANS 105-E04
SANS 164-0
SANS 164-4
SANS 181
SANS 207
SANS 289
SANS 290
2011-09-30
2012-06-30
2016-05-30
2017-03-31
2016-09-30
2016-08-31
2016-08-31
2016-08-31
2016-07-29
2016-08-01
2016-07-31
2017-03-31
TA
4
2
1
1
2
3
2
3
1.03
1.03
4
2
1.06
2
ED
Locks, latches, and associated furniture fordoors (Domestic Type)
The inspection, testing and examination ofmobile cranes
Safety of escalators and moving walks Part 2:Rules for the improvement of safety of existingescalators and moving walks
Technical type-approval requirements forswitching systems, for connection to the SouthAfrican public and private switching networks
Textiles - Tests for colour fastness Part B02:Colour fastness to artificial light: Xenon arcfading lamp test
Textiles - Tests for colour fastness Part E01:Colour fastness to water
Textiles - Tests for colour fastness Part E02:Colour fastness to sea water
Textiles - Tests for colour fastness Part E04:Colour fastness to perspiration
Plug and socket-outlet systems for householdand similar purposes for use in South AfricaPart 0: General and safety requirements
Plug and socket-outlet systems for householdand similar purposes for use in South AfricaPart 4: Dedicated system, 16 A 250 V a.c.
Thermostatic controls for electric storagewater heaters
The design and construction of reinforced soilsand fills
Labelling requirements for prepackagedproducts (prepackages) and generalrequirements for the sale of goods subject tolegal metrology control
Mineral insulating oils - Management ofpolychlorinated biphenyls (PCBs)
TITLE INTERNATIONAL RELATEDNESS
30.20
35.20
50.60
20.00
20.00
20.00
20.00
20.00
50.70
50.20
50.60
20.00
50.20
50.20
STAGE
2013-04-22
2014-08-20
2016-01-08
2014-08-15
2016-03-30
2016-02-12
2016-02-12
2016-02-12
2015-12-09
2016-04-19
2015-12-12
2014-03-14
2016-05-03
2016-04-19
STAGE DATE ICS
91.060.50
53.020.20
91.140.90
59.080.01
59.080.01
59.080.01
59.080.01
29.120.30
29.120.30
17.200.2091.140.65
93.020
55.020
29.040.10
EN 115-2:2010
ISO 105-B02:2014
ISO 105-E01:2013
ISO 105-E02:1994
ISO 105-E04:2008
IDT
IDT
IDT
IDT
IDT
1014-02
096
1082
074-04
038-01
038-01
038-01
038-01
067-03
067-03
075
098-06
070-04
028-02
COMMITTEESABS NUMBER
SABS 4
SABS ISO 105-B02
SABS ISO 105-E01
SABS ISO 105-E02
SABS ISO 105-E04
SABS 181
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 2 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 295
SANS 329
SANS 340
SANS 353
SANS 434
SANS 445
SANS 457-2
SANS 511
SANS 517
SANS 534-1
SANS 551
SANS 555-1
SANS 555-2
SANS 555-3
SANS 555-4
2017-01-31
2017-01-31
2016-09-30
2016-05-30
2016-09-30
2016-05-30
2016-10-31
2017-03-31
2016-11-30
2016-05-31
2017-02-28
2017-02-28
2017-02-28
2017-02-28
2017-02-28
TA
4
3
3
2
6
2
7
2
2
4
2
1
1
1
1
ED
Calcium hypochlorite
Industrial thermoprocessing equipment -Safety requirements for combustion and fuel-handling systems
Conveyor belts - Laboratory scale flammabilitycharacteristics - Requirements and testmethod
Rolling bearings - Plummer block housings -Boundary dimensions
Personal Protective Clothing
Rolling bearings - Radial bearings - Boundarydimensions, general plan
Wooden poles, droppers, guardrail posts andspacer blocks Part 2: Softwood species
Women's workwear
Light steel frame building
Vehicle security - Whole-of-vehicle markingPart 1: Microdot systems
Detonators, relays and explosives initiatingdevices for commercial applications
Fluids for electrotechnical applications Part 1:Unused inhibited mineral insulating oils fortransformers and switchgear
Fluids for electrotechnical applications Part 2:Unused uninhibited mineral insulating oils fortransformers and switchgear
Fluids for electrotechnical applications Part 3:Reclaimed inhibited mineral oil fortransformers and switch gear
Fluids for electrotechnical applications Part 4:Reclaimed uninhibited mineral oil fortransformers and switch gear
TITLE INTERNATIONAL RELATEDNESS
20.00
20.00
20.00
50.20
20.00
50.20
30.20
20.00
20.00
30.60
20.00
30.20
30.20
30.20
30.20
STAGE
2013-06-14
2014-10-03
2016-02-12
2015-12-15
2015-09-23
2015-12-15
2014-04-15
2014-01-17
2014-01-31
2015-12-22
2014-06-27
2014-12-01
2014-12-01
2014-12-01
2014-12-01
STAGE DATE ICS
71.100
25.180.01
53.040.20
21.100.20
13.340.10
21.100.20
79.08091.090
61.020
91.080.10
13.310
71.100.30
29.040.10
29.040.10
29.040.10
29.040.10
ISO 340:2013
ISO 113:2010
ISO 15:2011
IEC 60296:2013
IEC 60296:2013
MOD IEC 62701:2014
MOD IEC 62701:2014
IDT
IDT
IDT
MOD
MOD
MOD
MOD
1006-03
1019
045-01
004
1194-02
004
218
1195
098-03
1096-01
1064
028-02
028-02
028-02
028-02
COMMITTEESABS NUMBER
SABS 295
SABS 434
SABS 457-2
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 3 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 556-2-5
SANS 587
SANS 636
SANS 651-2
SANS 753
SANS 827
SANS 885
SANS 893-1
SANS 893-2
SANS 909
SANS 929
SANS 949
SANS 950
2016-12-31
2016-12-31
2017-03-31
2017-01-31
2016-10-31
2017-01-31
2016-09-30
2016-04-30
2016-04-30
2016-12-31
2014-07-31
2012-02-29
2017-03-31
TA
1
3
5
1
5
2
4
2
2
1
3
3
3
ED
Low-voltage switchgear Part 2-5: Earthleakage switches - Switches that incorporateresidual current protection
Canned fish, canned marine molluscs andcanned crustaceans, and products derivedtherefrom
Disinfectants based on quaternary ammoniumcompounds
Laundry detergents Part 2: Laundry detergentcapsules for use in automatic domesticwashing machines
Pine poles, cross-arms and spacers for powerdistribution, telephone systems and streetlighting
The installation of pipes and appliances foruse with natural gas
Processed meat products
Legionella- Part 1: Risk management
Legionella-Part 2: The control of Legionella inwater systems
Pet food - Nutritional and manufacturingrequirements
Plywood and composite board
Strongroom and vault doors
Unplasticized polyvinyl chloride rigid conduitand fittings for use in electrical installations
TITLE INTERNATIONAL RELATEDNESS
50.60
30.20
20.00
20.00
30.20
20.00
20.00
30.20
30.20
50.60
30.60
20.00
20.00
STAGE
2016-01-12
2015-12-01
2016-02-12
2015-02-27
2015-05-19
2013-08-23
2014-02-21
2016-02-05
2016-02-05
2015-03-20
2012-10-26
2010-10-22
2015-11-27
STAGE DATE ICS
07.100.3067.120.30
71.100.35
29.240.2079.040
75.06091.140.40
67.120.10
13.02013.020.3013.020.4013.060
13.02013.020.3013.020.4013.060
07.100.3065.120
79.060.10
13.31091.060.50
29.120.1083.140.30
067-02
234
1022
1006-02
218
1019
1027
147-04
147-04
034-13
1008
1014-01
067-03
COMMITTEESABS NUMBER
SABS 587
SABS 636
SABS 753
SABS 885
SABS 929
SABS 949
SABS 950
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 4 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 952-1
SANS 953-1
SANS 953-2
SANS 959-1
SANS 969
SANS 969-2
SANS 973
SANS 987
SANS 1035
ARP 1049-1
SANS 1050-1
SANS 1050-2
SANS 1083
SANS 1104
SANS 1116-1
SANS 1116-2
2017-08-31
2017-01-31
2016-09-30
2016-12-31
2016-12-31
2017-06-30
2012-03-31
2016-06-30
2016-12-31
2016-12-31
TA
2
2
1.02
1.02
1
1
1.01
1
1
1
1
1
2.05
1
3.01
5.01
ED
Polymer film for damp-proofing andwaterproofing in buildings Part 1:Monofilament and co-extruded products
Storage of firearms and ammunition Part 1:Safes
Storage of firearms and ammunition Part 2:Strongrooms
Photovoltaic systems for use in individualhomes, schools and clinics Part 1:Standardized requirements applicable to off-grid individual homes, schools and clinics
Clean-up of road chemical spillages
Clean-up of dangerous and non-dangerousgoods incidents Part 2 Rail occurrences
Number plate carriers
Adiabatic determination of spontaneouscombustion
Rail-bound rolling stock lifting jacks used forunderground and industrial applications
Wildlife rehabilitation- Specific housingrequirements- Birds
Laboratory controlled environments Part 1:Microbiological safety cabinets - Class I
Laboratory controlled environments Part 2:Microbiological safety cabinets - Class II
Aggregates from natural sources - Aggregatesfor concrete
Gas vehicle propulsion system
Retro-reflective number plates for motorvehicles Part 1: Blank plates (aluminium)
Retro-reflective number plates for motorvehicles Part 2: Number plates (aluminium)
TITLE INTERNATIONAL RELATEDNESS
30.20
20.00
50.60
35.60
30.20
30.20
50.60
20.00
35.20
30.20
35.20
35.20
50.20
20.00
50.60
50.60
STAGE
2016-04-05
2014-11-28
2015-08-13
2015-11-04
2016-01-20
2016-01-20
2016-02-16
2013-04-12
2015-11-19
2015-09-29
2015-10-31
2015-10-30
2016-03-22
2015-05-08
2016-03-30
2016-03-30
STAGE DATE ICS
83.140.1091.120.30
13.310
13.310
27.160
03.220
07.08007.100.01
07.08007.100.01
91.100.1591.100.25
43.040.60
43.040.60
NRS 052-1:2012 IDT
081-06
1014-01
1014-01
069
207
207
1070-01
027-05
1020
1040-07
048-01
048-01
081-01
1019
1070-01
1070-01
COMMITTEESABS NUMBER
SABS 953-1
SABS 953-2
SABS 1083
SABS 1116-1
SABS 1116-2
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 5 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 1116-4
SANS 1135
SANS 1140
SANS 1213
SANS 1237
SANS 1247
SANS 1251
SANS 1253
SANS 1295
SANS 1302
SANS 1325
SANS 1327
SANS 1329-4
SANS 1339
SANS 1369
SANS 1381-4
2017-03-31
2012-09-30
2016-05-30
2017-09-30
2005-12-24
2017-04-30
2016-09-05
2016-10-30
2016-11-30
2016-12-31
2016-08-29
2016-12-31
2016-12-31
2016-12-31
TA
5.01
1
1
3
4
1
3
3.01
1
2
1
1.05
4
5.01
1
3
ED
Retro-reflective number plates for motorvehicles Part 4: Number plates (plastics)
Wireless communication site engineering
Requirements for webbing material, chainsand ropes for cargo securement
Mechanical cable glands
Single-stage regulators for liquefied petroleumgas (LPG)
Aluminium pigments for paints
Engine cooling system protectors
Fire-doors and fire-shutters
Rational use of energy - Thermal efficiency ongas appliances
Toothpaste
Classification of high visibility clothing
Electrical connectors for towing and towedvehicles (7-pole connectors)
Retro-reflective and fluorescent warning signsfor road vehicles Part 4: Retro-reflectivechevron signs and decals
Electric cables - Cross-linked polyethylene(XLPE) insulated cables for rated voltages3,8/6,6 kV to 19/33 kV
Organic agriculture production and processing
Materials for thermal insulation of buildingsPart 4: Reflective foil laminates (rolls, sheetsand sections)
TITLE INTERNATIONAL RELATEDNESS
50.60
30.70
30.20
20.00
20.00
30.20
20.00
50.20
20.00
20.00
20.00
50.20
20.00
50.60
50.60
20.00
STAGE
2016-03-30
2011-09-17
2013-05-30
2015-09-23
2016-01-22
2015-05-08
2016-03-11
2016-03-22
2013-05-24
2015-12-11
2016-02-19
2011-02-01
2015-09-23
2016-04-11
2014-12-22
2016-02-19
STAGE DATE ICS
43.040.60
29.100.20
23.060.4075.160.30
87.060.10
43.060.3071.100.45
13.220.2091.060.50
11.060.2011.120.99
43.040.10
43.040.20
29.060.2029.240.20
91.100.6091.120.10
ISO 1247:1974 +AM 1:1982 IDT
1070-01
074-05
1067
066
1019
035-03
028-02
021-03
1019
217
1194-02
022-08
1070
066
2110
1021
COMMITTEESABS NUMBER
SABS 1116-4
SABS 1213
SABS 1237
SABS 1251
SABS 1253
SABS 1302
SABS 1327
SABS 1329-4
SABS 1339
SABS 1381-4
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 6 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 1395-2
SANS 1395-3
SANS 1411-1
SANS 1438
SANS 1461
SANS 1496
SANS 1515-5
SANS 1516
SANS 1517
SANS 1518
SANS 1520-1
SANS 1520-2
SANS 1524-1-1
SANS 1535
2016-12-31
2016-12-31
2016-07-31
2016-09-30
2016-09-30
2017-01-31
2016-02-29
2017-03-31
2017-03-31
2016-12-30
2016-03-31
2016-08-31
2016-09-30
2016-06-30
TA
1
1
3
1.01
1
2
1
4
4
4.01
2
2
1.01
3
ED
Road transport management systems Part 2:Consignor requirements - Goods
Road transport management systems Part 3:Consignee requirements - Goods
Materials of insulated electric cables andflexible cords Part 1: Conductors
Portable light assemblies for underground usein mines
Major Hazard Installation - Risk Assessments
Wheel flaps fitted to motor vehicles
Gas measuring equipment primarily for use inmines Part 5: Fire detectors
High performance engine lubricating oil forpetrol engines (for API Service Category SL)
High performance engine lubricating oil fordiesel engines (for API Service Category CI-4)
Transport of dangerous goods - Design,construction, testing, approval andmaintenance of road vehicles and portabletanks
Flexible electric trailing cables for use in minesPart 1: cables with operating voltages of640/1100 V and 1900/3300 V
Flexible electric trailing cables for use in minesPart 2: cables with operating voltages of3,8/6,6 kV to 19/33 kV
Electricity payment systems Part 1-1:Mounting and terminal requirements forpayment meters
Glass-reinforced polyester-coated steel tanksfor the underground storage of hydrocarbonsand oxygenated solvents and intended forburial horizontally
TITLE INTERNATIONAL RELATEDNESS
20.00
20.00
20.00
50.60
20.00
30.20
50.60
20.00
20.00
50.60
50.60
30.20
50.20
30.20
STAGE
2012-02-17
2012-02-17
2015-10-02
2016-04-11
2012-11-02
2015-04-20
2015-06-28
2015-12-04
2015-12-04
2016-01-08
2015-08-18
2015-06-04
2016-02-11
2016-02-23
STAGE DATE ICS
29.05029.060.20
29.060.2029.220.2073.100.20
43.040.60
13.220.2029.260.20
75.100
75.100
13.30043.080.10
29.060.2029.260.20
29.060.2029.260.20
17.220.2029.240.9991.140.50
23.020.10
NRS 009-1-1:2013 IDT
241
241
066
065
292-02
022
065
028-02
028-02
1060-01
066
066
062
280
COMMITTEESABS NUMBER
SABS 1411-1
SABS 1496
SABS 1516
SABS 1517
SABS 1518
SABS 1520-1
SABS 1520-2
SABS 1535
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 7 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 1543
SANS 1545-1
SANS 1545-2
SANS 1545-6
SANS 1548-1
SANS 1557
SANS 1590
SANS 1604
SANS 1605
SANS 1608
SANS 1633
SANS 1634
SANS 1638
SANS 1647
SANS 1654
SANS 1661
SANS 1675
SANS 1685
2016-12-31
2016-08-30
2017-05-31
2017-01-31
2016-10-30
2017-03-31
2016-04-30
2016-08-31
2016-05-29
2016-12-30
2016-09-30
2016-12-31
2016-10-22
TA
2.04
3.06
3.05
1.04
1
4
1
1
1
1
1
1
3
1
2.02
3.01
2
1
ED
Escalators and passenger conveyors
Safety rules for the construction andinstallation of lifts Part 1: Electric lifts
Safety rules for the construction andinstallation of lifts Part 2: Hydraulic lifts
Safety rules for the construction andinstallation of lifts Part 6: Rack-and-pinion lifts
Use of recycled plastic material intended tocome into contact with food Part 1: PET
Sunscreen products
Supply chain specifications for whitepetroleum products
Cleaning and degreasing compounds -Biologically-based
Consumer product recall - Guidelines forsuppliers
Paperbags for direct food packaging
Part-worn tyres fitted to vehicles
Barrier protection systems for treated woodenpoles
Pneumatically powered chain hoists
Approved market names for South African fishand related seafood species
DC-powered (battery-operated) machines foruse in hazardous locations in mines
Cord extension sets
The manufacture, production, processing andtreatment of canned meat products
Theatre safety
TITLE INTERNATIONAL RELATEDNESS
50.60
50.20
50.60
50.60
20.00
20.00
20.00
30.20
50.60
20.00
50.60
30.20
50.60
20.00
50.60
50.70
20.00
20.00
STAGE
2016-03-27
2016-01-26
2016-03-27
2016-03-27
2013-02-08
2015-11-27
2013-04-12
2016-04-15
2014-03-27
2013-05-17
2016-01-28
2015-09-18
2016-03-27
2013-09-20
2016-04-11
2015-12-11
2015-12-04
2014-01-31
STAGE DATE ICS
91.140.90
91.140.90
91.140.90
91.140.90
11.120.10
03.080.3013.120
83.160.10
53.020.99
29.260.20
29.120.30
67.120.10
ISO 10393:2013 IDT
1082
1082
1082
1082
1001-06
217
028-03
1006-02
007
006-02
031
218
1020
234
065
067-03
1027
264
COMMITTEESABS NUMBER
SABS 1543
SABS 1545-1
SABS 1545-2
SABS 1557
SABS 1638
SABS 1654
SABS 1661
SABS 1675
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 8 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 1688
SANS 1694
SATS 1705
SATS 1706
SANS 1718-1
SANS 1718-2
SANS 1718-3
SANS 1718-4
SANS 1718-9
SANS 1725
SANS 1728
SANS 1731
SANS 1732
SANS 1741
SANS 1743
SANS 1744
2016-10-31
2016-07-31
2016-03-31
2017-12-31
2016-12-30
2016-06-30
2017-12-31
2016-06-30
2017-03-31
2017-06-15
2016-12-31
2017-09-30
2017-02-28
2016-08-31
2016-11-30
TA
1
1
1
1
3
4
3
3
3
1
1
1
1
1
1
1
ED
Conformity assessment for African traditionalmedicine preparations
The welfare of dairy cattle
Rational designs and assessments for energyusage in buildings in terms of SANS 10400-XA: A modelling and simulation protocol
UVGI Luminaires - Safety and performancerequirements
Gaming equipment Part 1: Casino equipment
Gaming equipment Part 2: Limited payoutgaming equipment
Gaming equipment Part 3: Monitoring andcontrol systems for gaming equipment
Gaming equipment Part 4: Wagering record-keeping software
Gaming equipment Part 9: Central monitoringsystem for limited payout machines
End user related Quality of Service parameterdefinitions and measurements; Part 1: GSMvoice
The requirements for the marking andidentification of degradable plastics
Polyethylene storage tanks for water andchemicals
Greywater Reuse Systems - GeneralRequirements
Cable markings for theft mitigation
Reaction to fire tests for products -Determination of the gross heat of combustion(calorific value)
Insulation for special equipment used inrefrigerated transport - Requirements and testmethod
TITLE INTERNATIONAL RELATEDNESS
20.00
20.00
20.00
30.20
20.00
50.60
35.20
30.20
35.20
30.20
20.00
30.20
20.00
20.00
20.00
20.00
STAGE
2014-08-15
2015-07-17
2014-08-08
2015-04-24
2015-09-23
2016-03-19
2016-01-26
2016-01-22
2016-01-22
2015-05-06
2014-09-12
2016-01-27
2015-08-21
2015-08-21
2016-02-26
2015-10-16
STAGE DATE ICS
91.040.0191.060.01
29.140.40
35.240.9997.200.99
35.240.9997.200.99
35.240.9997.200.99
35.240.9997.200.99
35.240.9997.200.99
01.040.3333.070.50
ISO 1716:2010 IDT
1097
1094
060
064-02
1095
1095
1095
1095
1095
074
122
138-03
224
066
021-03
086-01
COMMITTEESABS NUMBER
SABS 1718-1
SABS 1718-2
SABS 1718-3
SABS 1718-4
SABS 1718-9
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 9 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 1747
SANS 1750
SANS 1751
SANS 1752
SANS 1752
SANS 1753-1
SANS 1753-2
SANS 1755
SANS 1756
SANS 1757
SATR 1759
SATR 1759
SANS 1761
SATR 1767
SANS 1768-1
SANS 1768-2
2017-09-01
2017-04-30
2016-12-31
2016-09-30
2016-09-30
2017-05-31
2017-05-31
2017-12-31
2017-06-10
2016-04-30
2016-04-30
2016-04-30
2016-04-30
2017-11-30
TA
1
1
1
1
1
1
1
1.04
1
1
1
1
1
1
1
1
ED
Geotechnical Design Code
Servicing Valves For Domestic TerminalWater Fittings or Appliances
Storage of chemicals in laboratoryenvironment.
Strategic Facilities Management SystemStandard
Strategic Facilities Management SystemStandard
The construction, installation, commissioningand maintenance of any biogas plan, piping,controls and equipment, Part 1: Domestic andCommercial use of Biogas (below 0.5 GJ/hr)
The construction, installation, commissioningand maintenance of any biogas plan, piping,controls and equipment, Part 2: Commercialand Industrial use of Biogas (above 0.5 GJ/hr)
Petroleum jelly (petrolatum)
Packaging, paper potato bag
Aggregates from non-natural sources -Aggregates for concrete
Mapping of ISO/IEC 17021-1:2015 to ISO/IEC17021:2011
Mapping of ISO/IEC 17021-1:2015 to ISO/IEC17021:2011
Safes for domestic use
Quality assurance and quality management -Mapping the revised editions of ISO9001:2008 and ISO 9001:2015
Requirements for playground safety - Part 1Planning and equipment
Requirements for playground safety - Part 2Safety management
TITLE INTERNATIONAL RELATEDNESS
20.00
30.20
20.00
35.60
35.70
20.00
20.00
50.20
20.00
20.00
30.70
35.20
20.00
35.20
20.00
20.00
STAGE
2015-09-04
2016-02-02
2015-09-23
2016-04-21
2016-04-21
2015-10-23
2015-10-23
2016-03-15
2015-11-06
2015-11-20
2016-01-20
2016-01-20
2015-12-11
2016-01-20
2016-02-05
2016-02-05
STAGE DATE ICS
23.060.01
03.100.70
03.100.70
11.120.1075.140
098-06
138-02
1060-04
267
267
1019
1019
028-02
006-02
081-01
003
003
1014
176
1090
1090
COMMITTEESABS NUMBER
SABS 1755
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 10 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 1772
SANS 1774
SANS 1775-5
SANS 1775-6
SANS 1776
SANS 1783-5-1
SANS 1783-5-2
SANS 1795-5
SANS 1828
SANS 1838-1
SANS 1839
SANS 1842
SANS 1843
SANS 1866-1
2017-12-30
2017-03-31
2016-12-31
2016-12-31
2016-07-31
2016-07-31
2012-06-30
2016-07-31
2012-06-30
2017-03-22
2017-03-31
2017-03-31
2016-06-30
TA
1
2
1
1
1
1
1
2
2
2
2
3
3
1
ED
Flexible retort pouches for the food industry
Liquefied petroleum gases
Intravenous infusion and transfusionequipment (sterile-packed for single use) Part5: Extension sets
Intravenous infusion and transfusionequipment (sterile-packed for single use), Part6: Accessory items for use with infusionsystems
Paper for electrostatic (xerographic) copying
Sawn softwood timber - Part 5-1: Structuraltimber - Stress-grade assessment
Sawn softwood timber - Part 5-2: Structuraltimber - Stress-grading
Road traffic law enforcement systems Part 5:Data capturing and recording devices for roadtraffic law enforcement
Cleaning chemicals for use in the foodindustry
Electronic self-indicating road vehicle massmeasuring equipment for use by road trafficauthorities Part 1: Non-automatic massmeasuring equipment for static massmeasurement
Pre-diluted aqueous ethylene glycol base (40% by volume, minimum) engine coolingsystem protector
High performance engine lubricating oil forpetrol engines (for API Service Category SM)
High performance engine lubricating oil fordiesel engines (for API Service Category Cj-4)
Medical devices Part 1: Medical face masks
TITLE INTERNATIONAL RELATEDNESS
20.00
30.20
35.20
20.00
20.00
50.60
50.60
20.00
50.60
30.20
20.00
20.00
20.00
50.60
STAGE
2016-04-08
2015-08-26
2015-10-13
2015-10-09
2016-02-19
2015-03-25
2015-03-25
2010-05-28
2016-05-05
2013-10-24
2016-02-12
2015-12-04
2015-12-04
2015-12-07
STAGE DATE ICS
75.160.30
11.040.20
17.080
71.100.40
17.06017.100
71.100.45
75.100
75.100
11.040.3013.340.30
1027
028-03
1036
1036
006
1008
1008
078
1006-02
078
028-02
028-02
028-02
1039
COMMITTEESABS NUMBER
SABS 1774
SABS 1795-5
SABS 1828
SABS 1838-1
SABS 1839
SABS 1842
SABS 1843
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 11 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 1866-2
SANS 1876
SANS 1883-2
SANS 1883-2
SANS 1910
SANS 1934
SANS 2001-BE2
SANS 2001-BE6
SANS 2001-BE7
SANS 2001-BE8
SANS 2001-EC1
SANS 2001-EF1
SANS 2001-CC1
SANS 2001-CC2
SANS 2001-BG1
SANS 2001-DP7
SANS 2001-DR2
2016-06-30
2016-12-30
2016-12-30
2016-12-30
2017-02-28
2016-12-31
2011-09-30
2011-09-30
2011-09-30
2011-09-30
2011-09-30
2011-09-30
2016-09-30
2016-09-30
2016-11-30
2016-11-30
2017-03-31
TA
1
1
1
1
2
2
1
1
1
1
1
1
2
2
1
1
1
ED
Medical devices Part 2: Medical respirators
Minimum data content and feature instanceidentification standard
Adresses Part 2: Adresses data exchange
Adresses Part 2: Adresses data exchange
Portable refillable fire extinguishers
Live working - Portable equipment for earthingor earthing and short-circuiting - Nationalmodifications to international requirements
Standardized specification for constructionworks BE2: Earthworks (small works)
Standardized specification for constructionworks BE6: Small earth dams
Standardized specification for constructionworks BE7: Gabions and pitching
Standardized specification for constructionworks BE8: Earthworks (roads, subgrade)
Construction works EC1: Ceilings andpartitions
Construction works EF1: Floor coverings andwall linings
Construction works Part CC1: Concrete works(structural)
Construction works Part CC2: Concrete works(minor works)
Construction works Part BG1: Piling
Construction Works:Part DP7-Sewers forbuildings
Construction works DR2: Segmented paving
TITLE INTERNATIONAL RELATEDNESS
50.60
35.60
30.60
35.70
20.00
20.00
50.20
50.20
50.20
50.20
20.00
20.00
20.00
20.00
20.00
20.00
20.00
STAGE
2015-12-07
2016-04-01
2016-04-21
2016-04-21
2016-02-26
2015-11-27
2003-01-16
2003-01-16
2003-01-16
2003-01-16
2009-10-23
2009-10-23
2015-08-28
2015-08-28
2015-10-23
2015-10-16
2015-11-27
STAGE DATE ICS
11.040.1011.140
07.04035.240.70
13.220.20
13.26029.260.99
93.020
93.020
93.020
93.020
91.060.0191.060.30
91.060.0191.060.30
91.100.30
91.100.30
1039
211
211
211
021-04
067-05
1098
1098
1098
1098
1098
1098
1098
1098
1098
1098
1098
COMMITTEESABS NUMBER
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 12 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 2001-EF3
SANS 2001-EJ
SANS 2001-EM2
SANS 2001-ET1
SANS 2972
SANS 3000-1
SANS 3000-2-1
SANS 3000-2-2
SANS 3000-2-3
SANS 3001-AS24
SANS 3001-AG11
SANS 3001-AS5
SANS 3001-AS3
SANS 3001-AS4
2016-11-30
2016-11-30
2011-09-30
2011-09-30
2016-06-30
2016-07-25
2016-07-25
2016-07-25
2016-07-25
2016-08-26
2016-04-30
2016-05-01
2016-05-01
2016-05-01
TA
1
1
1
1
1
3
2
2
2
1
1
1
1
1
ED
Construction Works: Part EF3: Resilientthermoplastic and similar flexible floorcovering
Construction works: Part EJ: Joinery
Construction works EM2: Surface finishes -Concrete floors
Construction works ET1: Tiling
Lifting tackle - Inspections
Railway safety management Part 1: General
Railway safety management Part 2-1:Technical requirements for engineering andoperational standards - Electrical infrastructure
Railway safety management Part 2-2:Requirements for systemic requirements andoperational safety standards - Track andassociated civil infrastructure and installations
Railway safety management Part 2-3:Technical requirements for engineering andoperational standards - Rolling stock
Civil engineering test methods Part AS24:Determination of the moisture susceptibility ofasphalt mixes
Tests for mechanical and physical propertiesof aggregates - Part 8: Determination of thepolished stone value
Civil engineering test methods - Part AS5:Determination of the dynamic creep of asphalt
Civil engineering test methods Part AS3:Determination of the compactioncharacteristics of asphalt mixes using theSuperpave gyratory compactor
Civil engineering test methods Part AS4:Determination of the indirect tensile strength ofasphalt
TITLE INTERNATIONAL RELATEDNESS
20.00
20.00
20.00
20.00
35.20
35.20
35.20
35.20
35.20
30.20
50.60
30.20
30.20
50.60
STAGE
2015-10-16
2015-10-23
2009-10-23
2009-10-23
2016-03-02
2016-04-06
2016-04-05
2016-04-05
2016-04-05
2016-02-02
2016-04-12
2015-11-17
2015-11-16
2015-04-07
STAGE DATE ICS
91.060.30
91.060.01
45.02093.100
45.02093.100
45.02093.100
45.02093.100
91.220
91.100.15
93.080.20
93.080.20
91.100.1593.01093.080.20
EN 1097-8:2009 IDT
1098
1098
1098
1098
1020
1066
1066
1066
1066
081-08
081-04
081-08
081-08
081-08
COMMITTEESABS NUMBER
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 13 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 3001-PD1
SANS 3001-CO1-2
SANS 3001-CO2-2
SANS 3001-CO1-7
SANS 3001-CO2-7
SANS 3001-CO2-9
SANS 3001-CO2-10
SANS 3001-CO1-3
SANS 3001-CO2-6
SANS 3001-CO1-1
SANS 3001-CO2-1
SANS 3001-CO2-3
SANS 3001-CO1-6
SANS 3001-CO1-8
2016-04-01
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-09-30
TA
1
1
1
1
1
1
1
1
1
1
1
1
1
1
ED
Civil engineering test methods Part PD1:Determination of permanent deformation andmoisture sensitivity in asphalt mixes with theMMLS3
Civil engineering test methods Part CO1-2 :Sampling
Civil engineering test methods Part CO2-2:Making and curing of test specimens
Civil engineering test methods Part CO1-7:Density of compacted freshly mixed concrete.
Civil engineering test methods Part CO2-7:Initial drying shrinkage and wetting expansionof concrete
Civil engineering test methods Part CO2-9:Mortar tests - Compressive strength of mortar
Civil engineerings test methods Part CO2-10:Mortar tests - Initial drying shrinkage andwetting expansion of mortar
Civil engineering test methods - Part CO1-3:Consistence of freshly mixed concrete - Slumptest
Civil engineering test methods Part CO2-6:Tensile splitting strength of hardened concrete
Civil engineering test methods - Part CO1-1:Mixing fresh concrete in the laboratory
Civil engineering test methods - Part CO2-1:Dimensions, tolerances and uses of cast testspecimens
Civil engineering test methods - Part CO2-3:Compressive strength of hardened concrete
Civil engineering test methods Part CO1-6:Consistence of freshly mixed concrete - Flowtable test
Civil engineering test methods Part CO1-8: Aircontent of freshly mixed concrete - Pressuremethod
TITLE INTERNATIONAL RELATEDNESS
50.20
50.60
35.20
30.20
30.20
30.20
30.20
30.20
30.20
30.20
30.20
30.20
30.20
30.20
STAGE
2016-04-28
2015-06-23
2016-05-04
2016-05-04
2016-05-04
2016-05-04
2016-05-04
2016-05-04
2016-05-04
2016-05-04
2016-05-04
2016-05-04
2016-05-04
2016-05-04
STAGE DATE ICS
93.080.30
91.100.30
91.080.4091.100
EN 12350-1:2009 IDT
081-08
081-01
081-01
081-01
081-01
081-01
081-01
081-01
081-01
081-01
081-01
081-01
081-01
081-01
COMMITTEESABS NUMBER
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 14 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 3001-CO2-8
SANS 3001-CO1-4
SANS 3001-CO2-5
SANS 3001-CO3-5
SANS 3759
SANS 4381
SANS 4696-1
SANS 5667-13
SANS 5667-14
SANS 5667-15
SANS 5777
SANS 5850-1
SANS 5854
SANS 6240
2016-09-30
2016-09-30
2016-09-30
2016-09-30
2016-10-31
2016-05-30
2016-06-30
2016-10-31
2016-10-31
2016-10-31
2016-10-31
2016-12-10
2016-12-10
2016-12-10
TA
1
1
1
1
3
2
1
2
2
2
1
3
3
2
ED
Civil engineering test methods Part CO2-8:Density of hardened concrete
Civil engineering test methods - Part CO1-4:Consistence of freshly mixed concrete - Vebetest
Civil engineering test methods Part CO2-5:Flexural strength of concrete
Civil engineering test methods Part CO3-5:The drilling, preparation, and testing forcompressive strength of cores taken fromhardened concrete
Textiles - Preparation, marking and measuringof fabric specimens and garments in tests fordetermination of dimensional change
Plain bearings -Tin casting alloys for multilayerplain bearings
Iron ores for blast furnace feedstocks -Determination of low-temperature reduction-disintegration indices by static method Part 1:Reduction with CO, CO2, H2 and N2
Water quality - Sampling Part 13: Guidance onsampling of sludges from sewage and watertreatment works
Water quality - Sampling Part 14: Guidance onquality assurance of environmental watersampling and handling
Water quality - Sampling Part 15: Guidance onpreservation and handling of sludge andsediment samples
Air Con cleaning chemicals
Sulfates content of fines in aggregates Part 1:Water-soluble sulfates in fines in aggregates
pH Value of fines in aggregates for base-courses
Electric conductivity of fine aggregate
TITLE INTERNATIONAL RELATEDNESS
30.20
30.20
30.20
30.20
20.00
50.60
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
STAGE
2016-05-04
2016-05-04
2016-05-04
2016-05-04
2016-02-19
2016-01-26
2015-10-23
2016-02-19
2016-02-19
2016-02-19
2014-12-08
2007-08-03
2012-12-07
2012-12-07
STAGE DATE ICS
59.080.3061.020
21.100.1077.120.60
13.060.3013.060.45
13.060.0113.060.45
13.060.50
91.100.15
91.100.15
91.100.15
ISO 3759:2011
ISO 4381:2011
ISO 4696-1:2007
ISO 5667-13:2011
ISO 5667-14:2014
ISO 5667-15:1999
IDT
IDT
IDT
IDT
IDT
IDT
081-01
081-01
081-01
081-01
038-01
004
102
147-06
147-06
147-06
1006
081-04
081-04
081-04
COMMITTEESABS NUMBER
SABS ISO 3759
SABS ISO 5667-15
SABS SM 850-1
SABS SM 854
SABS SM 1240
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 15 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 7131
SANS 7404-3
SANS 7404-5
SANS 8443
SANS 9080
SANS 9623
SANS 10005
SANS 10019
SANS 10021
SANS 10043
SANS 10049
SANS 10082
SANS 10085-1
2017-12-30
2017-03-31
2017-03-31
2016-05-30
2016-10-30
2016-06-30
2016-07-31
2016-09-30
2016-10-31
2016-05-30
2016-12-31
2017-09-15
2012-11-30
TA
1
2
2
2
2
1
8
8
4
5
5
5
2
ED
Hot-applied thermoplastic road markingmaterials Part 1: Materials, mixtures andmanufacturing
Methods for the petrographic analysis ofbituminous coal and anthracite Part 3: Methodof determining maceral group composition
Methods for the petrographic analysis ofbituminous coal and anthracite Part 5: Methodof determining microscopically the reflectanceof vitrinite
Rolling bearings - Radial ball bearings withflanged outer ring - Flange dimensions
Plastics piping and ducting systems -Determination of the long-term hydrostaticstrength of thermoplastics materials in pipeform by extrapolation
Iron ores - Determination of magnesium -Flame atomic absorption spectrometricmethod
The preservative treatment of timber
Transportable pressure receptacles forcompressed, dissolved and liquefied gases -Basic design, manufacture, use andmaintenance
The waterproofing of buildings (includingdamp-proofing and vapour barrier installation)
The installation of wood and laminate flooring
Food safety management - Requirements forprerequisite programmes (PRPs)
Timber buildings
The design, erection, use and inspection ofaccess scaffolding Part 1: Steel accessscaffolding
TITLE INTERNATIONAL RELATEDNESS
20.00
20.00
20.00
50.60
20.00
20.00
50.60
30.20
20.00
30.20
20.00
20.00
20.00
STAGE
2013-06-14
2016-03-30
2016-03-30
2016-01-26
2016-02-19
2015-10-23
2016-01-19
2015-12-22
2013-03-15
2014-01-22
2013-05-10
2012-07-20
2012-02-10
STAGE DATE ICS
75.160.10
75.160.10
21.100.20
23.040.2083.080.20
71.100.5079.020
23.020.30
91.120.30
79.04091.060.30
67.020
91.040.0191.080.20
91.220
ISO 7404-3:2009
ISO 7404-5:2009
ISO 8443:2010
ISO 9080:2012
ISO 10204:2006
IDT
IDT
IDT
IDT
IDT
035-02
027-05
027-05
004
138-03
102
218
058
081-06
098-04
034-17
098-04
214
COMMITTEESABS NUMBER
SABS ISO 7404-3
SABS ISO 7404-5
SABS33
SABS 05
SABS 019
SABS 021
SABS 043
SABS 049
SABS 082
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 16 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 10086-3
SANS 10094
SANS 10100-3
SANS 10108
SANS 10124
SANS 10131
SANS 10134
SANS 10142-1
SANS 10142-3
SANS 10142-4
SANS 10145
SANS 10160-3
SANS 10160-4
SANS 10166
SANS 10198-13
2016-09-30
2016-06-15
2016-09-30
2016-09-30
2017-06-30
2017-02-28
2016-09-30
2016-12-31
2017-12-31
2017-06-30
2016-09-30
2016-07-30
2016-07-30
2012-04-30
2016-09-30
TA
2.02
5
1
6.01
4
2
3
2
1
1
2
2
2
2
2
ED
The installation, inspection and maintenanceof equipment used in explosive atmospheresPart 3: Repair and overhaul of equipment
The use of high-strength friction-grip bolts
The structural use of concrete Part 3: Waterretaining structures
The classification of hazardous locations andthe selection of equipment for use in suchlocations
The application of soil insecticides for theprotection of buildings
Above-ground storage tanks for petroleumproducts
Safety of private swimming pools
The wiring of premises Part 1: Low-voltageinstallations
The wiring of premises: Part 3: Low VoltageEmbedded Generators
The wiring of premises Part 4: Low-voltageinstallation in medical locations.
Concrete masonry construction
Basis of structural design and actions forbuildings and industrial structures Part 3: Windactions
Basis of structural design and actions forbuildings and industrial structures Part 4:Seismic actions and general requirements forbuildings
The overhaul of diesel fuel injection equipment
The selection, handling and installation ofelectric power cables of rating not exceeding33 kV Part 13: On-site testing, commissioning,maintenance, diagnostics and fault location
TITLE INTERNATIONAL RELATEDNESS
50.60
20.00
30.60
50.60
20.00
20.00
50.60
30.20
20.00
20.00
30.20
20.00
50.60
20.00
50.60
STAGE
2016-02-10
2014-05-09
2015-03-03
2016-04-11
2016-01-29
2016-03-04
2015-09-01
2015-10-07
2015-07-10
2016-03-30
2015-05-22
2013-05-24
2014-07-15
2010-04-16
2015-10-20
STAGE DATE ICS
29.260.20
21.060.10
91.140.6093.025
29.260.20
65.100.1091.120.99
23.020.1075.200
97.220.10
91.140.50
91.080.3091.100.30
91.010.3091.080.01
91.010.3091.080.01
43.060.40
29.240.20
065
098-03
098-02
065
1028
280
059-05
067-06
067-06
067-06
081-01
098-01
098-01
022-05
066
COMMITTEESABS NUMBER
SABS 086-3
SABS 094
SABS 0108
SABS 0124
SABS 0134
SABS 0142-1
SABS 0145
SABS 0166
SABS 0198-13
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 17 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 10206
SANS 10216
SANS 10222-3
SANS 10229-1
SANS 10232-1
SANS 10232-4
SANS 10234
SANS 10241
SANS 10255
SANS 10260-1
SANS 10263-0
SANS 10263-3
SANS 10264-4
SANS 10280-1
2016-12-31
2016-09-30
2016-06-30
2016-12-15
2016-04-30
2016-09-30
2017-03-31
2012-08-31
2016-09-30
2017-02-28
2016-10-30
2016-10-30
2016-06-30
TA
3
6
5
3
4
1.03
2
2
3
2
1.02
1
1
2.01
ED
The handling, storage and disposal ofpesticides
Evaluation of vehicle test stations
Electrical security installations Part 3: Electricfences (non-lethal) and manufacturerequirements
Transport of dangerous goods - Packagingand large packaging for road and rail transportPart 1: Packaging
Transport of dangerous goods - Emergencyinformation systems Part 1: Emergencyinformation system for road transport
Transport of dangerous goods - Emergencyinformation systems Part 4: Transportemergency card
Globally Harmonized System of classificationand labelling of chemicals (GHS)
Tachograph centres and mobile workshops
Health, safety and environmental guidelinesfor the construction and operation of timbertreatment plants
Industrial gas pipelines Part 1: Design,Construction, Installation, Operation,Examination and Maintenance (ExcludingAcetylene)
The warehousing of dangerous goods Part 0:General requirements
The warehousing of dangerous goods Part 3:The storage and handling of flammableliquids.
Disaster management Part 4: All-hazarddisaster risk reduction strategy development
Overhead power lines for conditions prevailingin South Africa Part 1: Safety
TITLE INTERNATIONAL RELATEDNESS
20.00
50.60
50.60
20.00
50.60
50.60
20.00
30.20
30.20
20.00
50.20
20.00
20.00
50.70
STAGE
2015-08-07
2016-04-21
2016-03-12
2013-01-25
2015-06-07
2015-06-07
2011-07-04
2011-01-13
2015-01-09
2014-11-07
2015-09-29
2015-07-10
2014-02-14
2015-10-02
STAGE DATE ICS
13.030.3065.100.01
03.120.2043.180
13.31091.090
03.22013.30055.020
13.300
13.300
13.300
35.16043.180
13.10079.020
23.040.0171.100.20
13.300
29.240.20NRS 041-1:2013 IDT
1060-04
1033
068
1060-03
1060-02
1060-02
1060-02
022
218
1019
1060-04
1060-04
292-02
067-05
COMMITTEESABS NUMBER
SABS 0206
SABS 0216
SABS 0222-3
SABS 0232-1
SABS 0241
SABS 0255
SABS 0260-1
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 18 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 10284
SANS 10287
SANS 10320
SANS 10330
SANS 10343
SANS 10366-1
SANS 10366-2
SANS 10368
SANS 10375
SANS 10377
SANS 10386
SANS 10388
SANS 10393
SANS 10400-A
SANS 10400-C
2016-09-30
2011-09-30
2016-10-30
2016-12-31
2012-06-30
2017-07-31
2017-07-31
2016-12-31
2012-06-30
2016-10-30
2017-06-30
2012-03-31
2017-03-31
TA
3
2
2
3
2
1
1
2
2
1
2
2
2
3.01
3.01
ED
Conveyor belts - Electrical conductivity -Specification and test method
Automatic sprinkler installations for fire-fightingpurposes
Systematic evaluation of coal explorationresults, inventory coal, coal resources andcoal reserves
Requirements for a Hazard Analysis andCritical Control Point (HACCP) system
Verification of non-automatic electronic self-indicating road vehicle mass measuringequipment for use by road traffic authorities
SANS 10366 Part 1 - Health and safety atevents, Part 1 Requirements
Health and safety at events, Part 2 Medicalrequirements at sporting events
Transport of low-hazard goods in bulk -Emergency information for road vehicles
The inspection, testing and examination ofoverhead cranes
Consumer product safety - Practical guidancefor suppliers
The care and use of animals for scientificpurposes
The inspection, examination and testing of lifttrucks
Hair care products - General requirements
The application of the National BuildingRegulations Part A: General principles andrequirements
The application of the National BuildingRegulations -- Part C: Dimensions
TITLE INTERNATIONAL RELATEDNESS
50.20
50.60
30.20
20.00
30.20
20.00
20.00
20.00
20.00
50.60
20.00
35.20
20.00
50.60
50.60
STAGE
2016-05-05
2015-05-09
2015-03-18
2013-05-10
2015-02-18
2016-04-15
2016-04-15
2015-09-23
2010-05-28
2014-03-27
2014-02-21
2014-08-21
2015-04-17
2014-10-07
2015-09-02
STAGE DATE ICS
53.040.20
13.220.1091.140.60
73.040
03.120.1067.020
17.06043.020
13.300
53.020.20
03.080.3013.12097.020
07.08011.040.0111.100
43.10053.020.20
71.100.70
91.040.01
91.040.01
ISO 284:2012
ISO 10377:2013
IDT
IDT
045-01
021-01
027
034-17
078
264
264
1060-02
096
007
1040-04
110
217
060
060
COMMITTEESABS NUMBER
SABS 0287
SABS 0330
SABS 0343
SABS 0368
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 19 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 10400-F
SANS 10400-H
SANS 10400-J
SANS 10400-L
SANS 10400-Q
SANS 10400-W
SANS 10400-XA
SANS 10407
SANS 10408
SANS 11257
SANS 11820
SANS 11863
SANS 11925-2
2016-11-30
2016-05-31
2016-09-30
2016-06-30
2016-04-30
2016-04-30
2016-04-30
TA
3.01
3.01
3.01
4
3.01
3.01
2
2.01
2
1
2
1
1
ED
The application of the National BuildingRegulations Part F: Site operations
The application of the National BuildingRegulations Part H: Foundations
The application of the National BuildingRegulations Part J: Floors
The application of the National BuildingRegulations Part L: Roofs
The application of the National BuildingRegulations Part Q: Non-water-borne meansof sanitary disposal
The application of the National BuildingRegulations Part W: Fire installation
The application of the National BuildingRegulations Part X: Environmentalsustainability Part XA: Energy usage inbuildings
Thatched roof construction
Repairs to tyres for motor vehicles, tubes andvalves
Iron ores for shaft direct-reduction feedstocks -Determination of the low-temperaturereduction-disintegration index and degree ofmetallization
Reaction to fire tests for building products -Non-combustibility test
Buildings and building-related facilities -Functional and user requirements andperformance - Tools for assessment andcomparison
Reaction to fire tests - Ignitability of productssubjected to direct impingement of flame -Part 2: Single-flame source test
TITLE INTERNATIONAL RELATEDNESS
50.60
50.60
50.60
20.00
50.60
50.60
20.00
50.20
30.20
50.60
20.00
50.60
20.00
STAGE
2014-10-28
2015-05-26
2015-12-22
2015-02-13
2014-12-23
2014-11-11
2015-05-29
2016-03-08
2014-08-18
2016-02-26
2015-12-11
2016-03-03
2015-12-11
STAGE DATE ICS
91.040.01
91.040.01
91.040.01
91.040.01
91.040.01
91.040.01
91.040.01
91.060.20
83.160.10
73.060.10
13.220.5091.100
91.040.01
ISO 11257:2007
ISO 1182:2010
ISO 11863:2011
ISO 11925-2:2010 +Cor 1:2011
IDT
IDT
IDT
IDT
060
060
060
060
060
060
060
098-04
031
102
021-03
1098
021-03
COMMITTEESABS NUMBER
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 20 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 12353
SANS 13822
SANS 14452
SANS 14785
SANS 15459-1
SANS 15459-3
SANS 15459-4
SANS 15459-5
SANS 15459-6
SANS 15686-1
SANS 15961-1
SANS 15962
SANS 16336
2017-03-31
2016-06-30
2016-10-30
2016-08-30
2016-08-30
2016-08-30
2016-08-30
2016-08-30
2016-08-30
2016-04-30
2016-09-30
2016-08-30
2016-08-30
TA
3
1
1
1
2
2
2
2
2
1
1
1
1
ED
Chemical disinfectants and antiseptics -Preservation of test organisms used for thedetermination of bactericidal,mycobactericidal, sporicidal and fungicidalactivity
Bases for design of structures - Assessmentof existing structures
Network services billing - Requirements
Tourist information offices - Tourist informationand reception services - Requirements
Information technology - Unique identifiersPart 1: Unique identifiers for transport units
Information technology - Unique identifiersPart 3: Common rules for unique identifiers
Information technology - Unique identifiersPart 4: Individual items
Information technology - Unique identifiersPart 5: Unique identifier for returnabletransport items (RTIs)
Information technology - Unique identifiersPart 6: Unique identifier for product groupings
Buildings and constructed assets - Service lifeplanning - Part 1: General principles andframework
Information technology - Radio frequencyidentification (RFID) for item management:Data protocol -Part 1: Application interface
Information technology - Radio frequencyidentification (RFID) for item management -Data protocol: data encoding rules and logicalmemory functions
Applications of statistical and related methodsto new technology and product developmentprocess -Robust parameter design (RPD)
TITLE INTERNATIONAL RELATEDNESS
20.00
50.20
50.60
50.60
50.60
50.60
50.60
50.60
50.60
50.60
50.60
50.70
50.60
STAGE
2016-02-12
2016-05-05
2014-03-27
2016-01-11
2015-12-10
2015-12-10
2015-12-10
2015-12-10
2015-12-10
2016-03-03
2016-05-04
2015-12-09
2015-12-11
STAGE DATE ICS
07.100.9911.080.2071.100.35
01.040.8383.060
03.080.3035.240.99
03.080.3003.200
35.040
35.040
35.040
35.04035.240.60
35.040
91.040.01
35.04035.240.60
35.04035.240.60
03.120.30
EN 12353:2013
ISO 13822:2010
ISO 14452:2012
ISO 14785:2014
ISO/IEC 15459-1:2014
ISO/IEC 15459-3:2014
ISO/IEC 15459-4:2014
ISO/IEC 15459-5:2014
ISO/IEC 15459-6:2014
ISO 15686-1:2011
ISO/IEC 15961-1:2013
ISO/IEC 15962:2013
ISO 16336:2014
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
1022
098-01
007
228
001-31
001-31
001-31
001-31
001-31
1098
001-31
001-31
169
COMMITTEESABS NUMBER
SABS EN 12353
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 21 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 16422
SATR 17026
SATS 17027
SANS 17258
SANS 17469-1
SANS 19103
SANS 19115-1
SANS 19135-1
SANS 19136-2
SANS 19147
SANS 19150-2
SANS 19153
SANS 19154
SANS 19160-1
2016-10-30
2016-06-30
2016-06-30
2016-09-30
2016-04-30
2016-08-30
2016-10-31
2016-08-30
2016-08-30
2016-06-30
2016-08-30
2016-08-30
2016-09-30
TA
2
1
1
1
1
2
1
1
1
1
1
1
1
1
ED
Pipes and joints made of orientedunplasticized poly(vinyl chloride) (PVC-O) forthe conveyance of water under pressure -Specifications
Conformity assessment - Example of acertification scheme for tangible products
Conformity assessment - Vocabulary relatedto competence of persons used forcertification of persons
Statistical methods - Six Sigma - Basic criteriaunderlying benchmarking for Six Sigma inorganisations
Document management - Strategy markuplanguage (StratML) - Part 1: StratML coreelements
Geographic information -- Conceptual schemalanguage
Geographic information - Metadata - Part 1:Fundamentals
Geographic information -- Procedures for itemregistration -- Part 1: Fundamentals
Geographic information - Geography MarkupLanguage (GML) - Part 2: Extended schemasand encoding rules
Geographic information - Transfer Nodes
Geographic information - Ontology - Part 2:Rules for developing ontologies in the WebOntology Language (OWL)
Geospatial Digital Rights ManagementReference Model (GeoDRM RM)
Geographic information - Ubiquitous publicaccess - Reference model
Addressing -- Part 1: Conceptual model
TITLE INTERNATIONAL RELATEDNESS
50.20
20.00
20.00
20.00
50.60
50.20
50.70
50.20
50.60
50.60
50.60
50.60
50.70
50.20
STAGE
2016-05-05
2016-01-22
2015-12-04
2016-04-08
2016-01-25
2016-04-21
2015-10-20
2016-04-21
2015-12-30
2016-01-19
2016-01-14
2015-11-06
2015-10-20
2016-04-21
STAGE DATE ICS
23.040.2023.040.4591.140.60
03.120.20
01.040.0303.120.20
35.240.30
35.240.70
35.240.70
35.240.70
35.240.70
35.240.70
35.240.70
ISO 16422:2006
ISO/IEC TR 17026:2015
ISO/IEC TS 17027:2014
ISO 17258:2015
ISO 17469-1:1111
ISO 19103:2015
ISO 19115-1:2014
ISO 19135-1:2015
ISO 19136-2:2015
ISO 19147:2015
ISO 19150-2:2015
ISO 19153:2014
ISO 19154:2014
ISO 19160-1:2015
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
138-03
003
003
169
171
211
211
211
211
211
211
211
211
211
COMMITTEESABS NUMBER
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 22 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 19162
SANS 20346
SANS 21101
SANS 21931-1
SANS 21931-1
SANS 22514-1
SANS 24611
SANS 24617-1
SANS 29167-11
SANS 30302
SANS 38500
SATS 38501
2016-08-30
2016-10-31
2016-04-30
2016-04-30
2016-04-30
2016-08-30
2016-07-31
2016-05-31
2016-08-30
2016-09-30
2016-05-31
2016-06-30
TA
1
2
1
1
1
1
1
1
1
1
2
1
ED
Geographic information - Well-known textrepresentation of coordinate referencesystems
Personal protective equipment - Protectivefootwear
Adventure tourism - Safety managementsystems - Requirements
Sustainability in building construction -Framework for methods of assessment of theenvironmental performance of constructionworks - Part 1: Buildings
Sustainability in building construction -Framework for methods of assessment of theenvironmental performance of constructionworks - Part 1: Buildings
Statistical methods in process management -Capability and performance - Part 1:Generalprinciples and concepts
Language resource management - Morpho-syntactic annotation framework (MAF)
Language resource management - Semanticannotation framework (SemAF) - Part 1: Timeand events (SemAF-Time, ISO-TimeML)
Information technology -Automaticidentification and data capturetechniques - Part 11: Crypto suite PRESENT-80 security services for air interfacecommunications
Information and documentation - Managementsystems for records-Guidelines forimplementation
Corporate governance of informationtechnology
Information technology - Governance of IT -Implementation guide
TITLE INTERNATIONAL RELATEDNESS
50.60
20.00
50.60
50.20
50.60
50.60
50.60
50.60
50.70
20.00
50.20
20.00
STAGE
2015-12-30
2016-02-19
2016-02-17
2015-11-03
2015-11-03
2016-01-08
2016-03-09
2016-04-01
2015-12-09
2016-03-18
2016-04-28
2015-12-11
STAGE DATE ICS
35.240.70
13.340.50
03.080.3003.200
91.040.01
91.040.01
03.120.30
01.020
01.020
35.04035.240.60
01.140.20
03.100.9935.02035.080
35.080
ISO 19162:2015
ISO 20346:2004
ISO 21101:2014
ISO 21931:2010
ISO 21931:2010
ISO 22514-1:2014
ISO 24611:2012
ISO 24617-1:2012
ISO/IEC 29167-11:2014
ISO 30302:2015
ISO/IEC 38500:2015
ISO/IEC TS 38501:2015
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
211
1194-01
228
1098
1098
169
037
037
001-31
046-11
001-40
001-40
COMMITTEESABS NUMBER
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 23 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SATR 38502
SANS 50054-1
SANS 50081-20
SANS 50081-22
SANS 50197-2
SANS 50958
SANS 51497
SANS 51992-1-1
SANS 51992-1-1SUPPLEMENT
SANS 51996-1-1
SANS 51996-1-2
SANS 51996-2
SANS 51996-3
2016-05-31
2016-05-31
2016-10-31
2017-02-28
2016-07-15
2016-07-31
2016-06-30
2016-07-31
2016-08-31
2016-06-30
2016-06-30
2016-06-30
2016-06-30
TA
1
3
1
1
2
1
1
1
1
1
1
1
1
ED
Information technology - Governance of IT -Framework and model
Fire detection and fire alarm systems Part 1:Introduction
Safety rules for the construction andinstallation of lifts - Lifts for the transport ofpersons and goods - Part 20: Passenger andgoods passenger lifts
Safety rules for the construction andinstallation of lifts - Lifts for the transport ofpersons and goods - Part 22: Electric lifts withinclined path
Cement Part 2: Conformity evaluation
Mountaineering equipment - Energy absorbingsystems for use in klettersteig (via ferrata)climbing - Safety requirements and testmethods
Personal fall protection equipment - Rescueharnesses
Eurocode 2:The design of concrete structures-Part 1-1:General rules and rules for buildings
Design of concrete structures - Part 1-1:General rules and rules for buildings
Eurocode 6 - Design of masonry structures -Part 1-1: General rules for reinforced andunreinforced masonry structures
Eurocode 6 - Design of masonry structures -Part 1-2: General rules - Structural fire design
Eurocode 6 - Design of masonry structures -Part 2: Design considerations, selection ofmaterials and execution of masonry
Eurocode 6 - Design of masonry structures -Part 3: Simplified calculation methods forunreinforced masonry structures
TITLE INTERNATIONAL RELATEDNESS
20.00
20.00
20.00
50.60
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
STAGE
2015-12-04
2016-02-12
2016-04-15
2016-01-08
2016-02-12
2016-02-12
2015-11-27
2015-12-11
2016-02-12
2016-02-12
2016-02-12
2016-02-12
2016-02-12
STAGE DATE ICS
35.020
13.220.20
91.140.90
91.140.90
91.100.10
97.220.40
13.340.60
91.010.3091.080.30
13.220.5091.010.3091.080.30
91.010.3091.080.30
91.010.3091.080.30
ISO/IEC TR 38502:2014
EN 54-1:2011
EN 81-20:2014
EN 81-22:2014
EN 197-2:2014
EN 958:2006
EN 1497:2007
EN 1991-1-1:2004
EN 1996-1-1:1111
EN 1996-1-2:1111
EN 1996-2:1111
EN 1996-3:1111
+AM 1:2010
+Cor 1:2008
+Sup 1:2015
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
001-40
021-01
1082
1082
081-01
094-04
094-04
098-02
098-02
098-05
098-05
098-05
098-05
COMMITTEESABS NUMBER
SABS EN 54-1
SABS EN 197-2
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 24 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 53138-1
SANS 53138-2
SANS 53138-3
SANS 53823
SANS 54390
SANS 54470-1
SANS 54511-3
SANS 55392
SANS 60034-25
SANS 60034-27-3
SANS 60076-10-1
SANS 60076-15
SANS 60079-5
2016-08-31
2016-08-31
2016-08-31
2016-04-30
2016-04-30
2016-06-30
2016-06-30
2016-04-30
2016-03-31
2016-09-30
2016-12-30
2016-06-30
2016-07-31
TA
3
3
3
1
1
1
2
1
3
1
2
2
4
ED
Buoyant aids for swimming instruction Part 1:Safety requirements and test methods forbuoyant aids to be worn
Buoyant aids for swimming instruction Part 2:Safety requirements and test methods forbuoyant aids to be held
Buoyant aids for swimming instruction Part 3:Safety requirements and test methods forswim seats to be worn
Reaction to fire tests for building products -Building products excluding floorings exposedto the thermal attack by a single burning item
Fire test. Large-scale room reference test forsurface products
Fire safety cabinets Part 1: Safety storagecabinets for flammable liquids
Air conditioners, liquid chilling packages andheat pumps with electrically drivencompressors for space heating and coolingPart 3: Test methods
Sustainability in building construction -General principles
Rotating electrical machines Part 25:Guidance for the design and performance ofa.c. motors specifically designed for convertersupply
Rotating electrical machines - Part 27-3:Dielectric dissipation factor measurement onstator winding insulation of rotating electricalmachines
Power transformers Part 10-1: Determinationof sound levels - Application guide
Power transformers Part 15: Gas-filled powertransformers
Explosive atmospheres Part 5: Equipmentprotection by powder filling "q"
TITLE INTERNATIONAL RELATEDNESS
20.00
20.00
20.00
20.00
20.00
30.20
50.20
50.60
50.60
30.20
20.00
50.60
50.60
STAGE
2016-02-12
2016-02-12
2016-02-12
2015-12-11
2015-12-11
2015-10-29
2016-05-10
2016-04-05
2016-02-26
2016-04-19
2016-04-15
2016-03-07
2015-12-30
STAGE DATE ICS
97.220.40
97.220.40
97.220.40
13.220.4071.040.10
23.120
91.040.01
29.160.30
17.140.2029.180
29.180
29.260.20
EN 13138-1:2014
EN 13138-2:2014
EN 13138-3:2014
EN 13823:2010
EN 14390:2014
EN 14511-3:2013
ISO 15392:2008
IEC TS 60034-25:2014
IEC 60034-27-3:2015
IEC 60076-10-1:2016
IEC 60076-15:2015
IEC 60079-5:2015
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
1188
1188
1188
021-03
021-03
048-01
075
1098
061
061
067-05
067-05
065
COMMITTEESABS NUMBER
SABS IEC 60079-5
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 25 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 60079-7
SANS 60079-10-1
SANS 60079-10-2
SANS 60079-18
SANS 60079-26
SANS 60079-28
SANS 60079-29-2
SANS 60086-1
SANS 60086-2
SANS 60320-1
SANS 60320-3
SANS 60335-2-21
SANS 60335-2-76(MOD)
2016-07-31
2016-08-31
2016-07-31
2016-06-30
2016-07-31
2016-07-31
2016-03-31
2016-07-31
2016-05-31
2016-07-31
2016-03-31
2017-07-28
2016-01-31
TA
4
2
2
4
3
2
2
6
7
4
1
2
1
ED
Explosive atmospheres Part 7: Equipmentprotection by increased safety "e"
Explosive atmospheres Part 10-1:Classification of areas - Explosive gasatmospheres
Explosive atmospheres Part 10-2:Classification of areas - Combustible dustatmospheres
Explosive atmospheres Part 18: Equipmentprotection by encapsulation "m"
Explosive atmospheres Part 26: Equipmentwith equipment protection level (EPL) Ga
Explosive atmospheres Part 28: Protection ofequipment and transmission systems usingoptical radiation
Explosive atmospheres Part 29-2: Gasdetectors - Selection, installation, use andmaintenance of detectors for flammable gasesand oxygen
Primary batteries Part 1: General
Primary batteries Part 2: Physical andelectrical specifications Edition 7
Appliance couplers for household and similargeneral purposes Part 1: Generalrequirements
Appliance couplers for household and similargeneral purposes Part 3: Standard sheets andgauges
Household and similar electrical appliances -Safety Part 2-21: Particular requirements forstorage water heaters
Household and similar electrical appliances -Safety Part 2-76: Particular requirements forelectric fence energizers
TITLE INTERNATIONAL RELATEDNESS
20.00
20.00
50.60
50.60
30.20
30.20
50.60
50.60
50.60
50.60
50.60
30.20
30.20
STAGE
2016-02-12
2016-02-26
2015-12-05
2016-03-11
2016-03-14
2016-03-16
2016-03-11
2016-02-28
2016-02-28
2016-04-01
2015-10-23
2015-07-08
2015-07-22
STAGE DATE ICS
29.260.20
29.260.20
29.260.20
29.260.20
29.260.20
29.260.20
29.260.20
29.220.10
29.220.10
29.120.30
29.120.30
91.140.65
IEC 60079-7:2015
IEC 60079-10-1:2015
IEC 60079-10-2:2015
IEC 60079-18:2014
IEC 60079-26:2014
IEC 60079-28:2015
IEC 60079-29-2:2015
IEC 60086-1:2015
IEC 60086-2:2015
IEC 60320-1:2015
IEC 60320-3:2014
IEC 60335-2-21:2003
IEC 60335-2-76:2013 +AM 1:2006
+AM 1:2006
+AM 2:2013
+AM 2:2013
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
MOD
MOD
065
065
065
065
065
065
065
063
063
067-03
067-03
072
068
COMMITTEESABS NUMBER
SABS IEC 60079-7
SABS IEC 60079-18
SABS IEC 60086-1
SABS IEC 60320-1
SABS 60335-2-21
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 26 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 60364-7-712
SANS 60598-2-5
SANS 60654-1
SANS 60670-1
SANS 60704-2-4
SANS 60704-2-6
SANS 60730-1
SANS 60730-2-5
SANS 60865-2
SANS 60909-0
SANS 60968
SANS 60974-2
SANS 60974-5
2016-03-31
2016-05-30
2016-06-30
2016-06-30
2016-05-31
2016-06-30
2016-06-30
2016-08-30
2016-12-30
2016-12-30
2016-12-31
2016-06-30
2016-06-30
TA
1
2
1
2
1
1
4
2
2
2
3
2
2
ED
Electrical installations of buildings - Part 7-712: Requirements for special installations orlocations - Solar photovoltaic (PV) powersupply systems
Luminaires Part 2-5: Particular requirements -Floodlights
Industrial-process measurement and controlequipment - Operating conditions - Part 1:Climatic conditions
Boxes and enclosures for electricalaccessories for household and similar fixedelectrical installations Part 1: Generalrequirements
Household and similar electrical appliances -Test code for the determination of air airborneacoustical noise - Part 2-4: Particularrequirements for washing machines and spinextractors
Household and similar electrical appliances -Test code for the determination of airborneacoustical noise - Part 2-6: Particularrequirements for tumble dryers
Automatic electrical controls - Part 1: Generalrequirements
Automatic electrical controls - Parts 2-5:Patricular requirements for automatic electricalburner control systems
Short-circuit currents - Calculation of effects -Part 2: Examples of calculations
Short-circuit currents in three-phase a.c.systems Part 0: Calculation of currents
Self-ballasted lamps for general lightingservices - Safety requirements
Arc welding equipment Part 2: Liquid coolingsystems
Arc welding equipment Part 5: Wire feeders
TITLE INTERNATIONAL RELATEDNESS
50.60
50.60
30.20
50.70
50.60
50.60
50.60
50.20
50.20
50.20
50.60
50.20
50.60
STAGE
2016-01-18
2016-03-21
2016-02-09
2015-11-05
2016-01-08
2016-01-08
2016-03-27
2016-04-07
2016-05-06
2016-05-06
2016-03-28
2016-03-31
2016-01-08
STAGE DATE ICS
29.140.40
29.120.10
17.140.2097.060
17.140.2097.060
97.120
97.120
17.220.01
29.140.30
25.160.30
25.16025.160.30
IEC 60364-7-712:2002
IEC 60598-2-5:2015
IEC 60654-1:1993
IEC 60670-1:2015
IEC 60704-2-4:2011
IEC 60704-2-6:2012
IEC 60730-1:2013
IEC/TR 60865-2:2015
IEC 60909-0:2016
IEC 60968:2015
IEC 60974-2:2013
IEC 60974-5:2013
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
067-06
064-02
165
067-03
075
075
072
072
067-02
067-02
064-01
072
072
COMMITTEESABS NUMBER
SABS IEC 60598-2-5
SABS IEC 60730-1
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 27 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 61140
SANS 61243-3
SANS 61439-5
SANS 61481-1
SANS 61481-2
SANS 61511-1
SANS 61511-2
SANS 61511-3
SANS 61643-22
SATR 61850-90-2
SANS 61914
SANS 61921
2016-12-31
2016-06-30
2016-06-30
2016-06-30
2016-06-30
2016-06-30
2016-06-30
2016-06-30
2016-06-30
2016-12-30
2016-12-31
2016-12-30
TA
2
3
1
1
1
1
1
1
2
1
2
1
ED
Protection against electric shock - Commonaspects for installation and equipment
Live working - Voltage detectors Part 3: Two-pole low-voltage type
Low-voltage switchgear and controlgearassemblies - Part 5: Assemblies for powerdistribution in public networks
Live working - Phase comparators - Part 1:Capacitive type to be used for voltagesexceeding 1 kV a.c.
Live working - Phase comparators - Part 2:Resistive type to be used for voltages from 1kV to 36 kV a.c.
Functional safety - Safety instrumentedsystems for the process industry sector - Part1: Framework, definitions, system, hardwareand software requirements
Functional safety - Safety instrumentedsystems for the process industry sector - Part2: Guidelines for the application of IEC 61511-1
Functional safety - Safety instrumentedsystems for the process industry sector - Part3: Guidance for the determination of therequired safety integrity levels
Low-voltage surge protective devices Part 22:Surge protective devices connected totelecommunications and signalling networks -Selection and application principles
Communication networks and systems forpower utility automation - Part 90-2: Using IEC61850 for communication between substationsand control centres
Cable cleats for electrical installations
Power capacitors - Low-voltage power factorcorrection banks
TITLE INTERNATIONAL RELATEDNESS
50.60
50.60
50.70
50.60
50.60
50.60
50.60
50.60
50.60
20.00
50.60
30.20
STAGE
2016-05-04
2015-11-06
2015-11-05
2015-11-04
2015-11-06
2016-03-11
2016-03-11
2016-03-11
2015-12-21
2016-04-15
2016-05-04
2016-04-22
STAGE DATE ICS
13.26029.02091.140.50
29.260.99
29.130.20
13.26029.240.2029.260.99
13.26029.240.2029.260.99
25.040.40
25.040.4035.240.50
25.040.4035.240.50
29.120.50
29.120.10
IEC 61140:2016
IEC 61243-3:2014
IEC 61439-5:2014
IEC 61481-1:2014
IEC 61481-2:2014
IEC 61511-1:2003
IEC 61511-2:2003
IEC 61511-3:2003
IEC 61643-22:2015
IEC TR 61850-90-2:1111
IEC 61914:2015
IEC 61921:2003
+Cor 1:2015
+Cor 1:2015
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
067-06
067-05
067-02
067-05
067-05
165
165
165
067-05
067-07
067-03
067-05
COMMITTEESABS NUMBER
SABS IEC 61243-3
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 28 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SATR 61968-900
SANS 62054-11
SANS 62056-1-0
SANS 62056-3-1
SANS 62231-1
SANS 62264-1
SANS 62264-2
SANS 62264-3
SANS 62264-4
SANS 62264-5
SANS 62271-3
SANS 62271-37-013
2016-12-31
2016-07-31
2016-07-31
2016-07-31
2016-07-31
2016-10-30
2016-10-30
2016-10-30
2016-10-30
2016-10-30
2016-06-30
2016-06-30
TA
1
1
1
1
1
1
1
1
1
1
2
1
ED
Application integration at electric utilities -System interfaces for distribution management- Part 900: Guidance for implementation ofIEC 61968-9
Electricity metering (a.c.) - Tariff and loadcontrol - Part 11: Particular requirements forelectronic ripple control receivers
Electricity metering data exchange - TheDLMS/COSEM suite - Part 1-0: Smartmetering standardisation framework
Electricity metering data exchange - TheDLMS/COSEM suite-Part 3-1: Use of localarea networks on twisted pair with carriersignalling
Composite station post insulators forsubstations with AC voltages greater than 1000 V up to 245 kV - Part 1: Dimensional,mechanical and electrical characteristics
Enterprise-control system integration - Part 1:Models and terminology
Enterprise-control system integration - "Part 2:Objects and attributes for enterprise-controlsystem integration".
Enterprise-control system integration - Part 3:Activity models of manufacturing operationsmanagement
Enterprise-control system integration - Part 4:Object model attributes for manufacturingoperations management integration
Enterprise-control system integration - Part 5:Business to manufacturing transactions
High-voltage switchgear and controlgear Part3: Digital interfaces based on IEC 61850
High-voltage switchgear and controlgear - Part37-013: Alternating current generator circuit-breakers
TITLE INTERNATIONAL RELATEDNESS
20.00
50.60
50.60
50.60
50.60
30.20
30.20
30.20
20.00
30.20
50.60
50.60
STAGE
2016-02-19
2015-10-25
2015-10-25
2016-04-06
2016-03-11
2016-03-15
2016-03-15
2016-03-15
2016-03-11
2016-03-15
2016-01-18
2016-03-11
STAGE DATE ICS
91.140.50
29.130.10
IEC TR 61968-900:2015
IEC 62054-11:2004
IEC 62056-1-0:2014
IEC 62056-3-1:2013
IEC 62231-1:2015
IEC 62264-1:2013
IEC 62264-2:2013
IEC 62264-3:2007
IEC 62264-4:2015
IEC 62264-5:2011
IEC 62271-3:2015
IEC/IEEE 62271-37-013:2015
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
IDT
067-07
062
062
062
067-04
165
001
165
165
165
067-01
067-01
COMMITTEESABS NUMBER
TECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
A- 29 SABS STANDARDS TECHNICAL PROGRAMME APRIL 2016
SANS NUMBER
SANS 62271-104
SATR 62271-307
SANS 62282-3-200
SATS 62443-1-1
SANS 62443-2-1
SANS 62443-2-4
SATR 62443-3-1
SANS 62443-3-3
SANS 62675
SANS 62756-1
2016-06-30
2016-06-30
2016-08-30
2016-07-31
2016-07-31
2016-03-31
2016-06-30
2016-09-30
2016-05-31
2016-05-31
TA
2
1
2
1
1
1
1
1
1
1
ED
High-voltage switchgear and controlgear Part104: Alternating current switches for ratedvoltages higher than 52 kV
High-voltage switchgear and controlgear - Part307: Guidance for the extension of validity oftype tests of AC metal and solid-insulationenclosed switchgear and controlgear for ratedvoltages above 1 kV and up to and including52 kV
Fuel cell technologies Part 3-200: Stationaryfuel cell power systems - Performance testmethods
Industrial communication networks - Networkand system security - Part 1-1: Terminology,concepts and models
Industrial communication networks - Networkand system security - Part 2-1: Establishing anindustrial automation and control systemsecurity program
Security for industrial automation and controlsystems - Part 2-4: Security programrequirements for IACS service providers
Industrial communication networks - Networkand system security - Part 3-1: Securitytechnologies for industrial automation andcontrol systems
Industrial communication networks - Networkand system security - Part 3-3: Systemsecurity requirements and security levels
Safety requirements for secondary batteriesand battery installations - Part 1: Generalsafety information General requirements -System components
Digital load side transmission lighting control(DLT) - Part 1: Basic requirements
TITLE INTERNATIONAL RELATEDNESS
50.70
30.60
50.60
30.20
50.60
50.20
50.60
50.60
50.60
50.60
STAGE
2015-11-05
2016-02-01
2016-04-25
2015-08-15
2016-01-14
2016-02-11
2015-09-25
2016-04-06
2016-02-22
2016-02-28
STAGE DATE ICS
29.130.1029.130.99
27.070
25.040.4033.040
25.040.4033.040.40