R744 Service KitFor service, R&D and production
R744 Service KitFor service, R&D and production
One of the challenges in the development of any new technology has been the transition
from a pure R&D environment to practical application – and R744 is no exception.
To support your development, AGRAMKOW Fluid System has designed the R744 service
kit, covering sub & trans critical R744 applications. This kit is designed for use in the
appliance, automotive and after sales markets, with functionality, reliability and safety as
the major driving considerations .
The coupling design complies with the SAE-J2769 standard and is tested according to
EC regulations, to ensure lasting performance in the toughest applications.
AGRAMKOW Fluid Systems A/S
Augustenborg Landevej 19 · DK-6400 Sonderborg
Tel: +45 74 12 36 36 · Fax: +45 74 43 36 46
www.agramkow.com
744-450001A-00
Applications
The R744 Service Kit is designed for the
following application areas:
• Research and Development
• MAC Service
• Heat pumps
• Commercial Refrigeration
Advantages
Quick couplings:
• Tested according to VDA specifications
• Operator safety
• Stainless steel used on wearable parts
• Pressure-less disconnection
• Low valve torsion due to pressure
equalization
• Low friction connection
(easy connection)
• Only one serviceable part (O-ring)
• Long service intervals
(5000 connections/disconnections)
• Improved accessibility
• Unique serial numbers for traceability
• Colour coded
• Build in valve eliminates hose venting
Service ports:
• Service port with build-in VENTREX
valve
• Stainless steel
• Specification according to SAE J639
Hoses:
• Colour coded
• High pressure design
• Stainless steel fittings
• Flexible with protective rubber surface
What is in the package
The service Kit is a high quality set of
unique innovatively designed components
intended for R&D, production or mainte-
nance areas.
CO2 systems present unique safety re-
quirements, and each component has been
individual tested according to
CE regulations to ensure full safety
compliance.
The complete content of the Service kit is
as follows:
• 2 x Quick couplings (HP/LP)
• 2 x Service hoses with fittings (HP/LP)
• 2 x Service ports incl. VENTREX valve,
protection cap and washer (LP/HP)
• 1 x Maintenance toolkit
• 1 x Sparepart kit
• Instruction manuals
Technical specifications
High pressure (HP) Low pressure (LP)
General
Working pressure 100 barg (100 kPa)
Max pressure 176 barg (176 kPa) 132 barg (132 kPa)
Burst pressure > 352 barg (352 kPa) > 264 barg (264 kPa)
Working ambient 10°C – 50°C (50°F to 122°F) @max 85% humiditytemperature
Media Temperature -30°C to 95°C (22°F to 203°F)
Storage temperature -30°C to 85°C (22°F to 185°F) @max 85% humidity
Coupling
Weight 365 gram (12.9 oz) 390 gram (13.8 oz)
Surface/Colour Red Blue
Dimensions D: 41mm, L: 80/85mm D: 41mm, L: 85/90mm
Standards * SAE J639 and SAE J2769 (draft 13 oct. 2008)
Connection * ¼”- 19 NPT - ISO 7/1
Hoses
Weight 320 gram (11.3 oz)
Length 3 m
Inner diameter 3 mm
Surface/Colour Red Blue
Connection * Ø6 mm - Straight pin
Fittings Swagelok® Ø6-¼” NPT female
Service ports
Weight 85 gram (3 oz) 75 gram (2.6 oz)
Valve type VENTREX push-pin
Material Stainless steel
Standards Complies to SAE J639
Connection ¼” - 19 Parallel - ISO 228-1
*Connection deviates from SAE J2769 (draft 13 oct. 2008) standard
Code numbers
Complete Service Kit 744-000020A
Low Pressure Coupling 744-000021A
High Pressure Coupling 744-000022A
Low Pressure hose with connectors 744-000023A
High Pressure hose with connectors 744-000024A
Low pressure service port incl VENTREX valve 744-000025A
High pressure service port incl VENTREX valve 744-000026A
Maintenance toolkit 744-000027A
Sparepart kit 744-000028A
Alterations reserved.