TECHNICAL SPECIFICATIONS
HDD 100T RIG
Technical Specs HDD100t Rig-2006 rev1.doc Page 1 of 7
201.16
OPERATOR DrillTec GUT GmbH
MANUFACTURER Prime Drilling GmbH
D-57482 Wenden-Gerlingen, Germany
MODEL PD 100/50 RP-L
YEAR 2006
TECHNICAL SPECIFICATIONS
HDD 100T RIG
Technical Specs HDD100t Rig-2006 rev1.doc Page 2 of 7
Rig & control cab
Table of Contents
HDD Rig with integrated hydraulic powerpack .........................................................................................3
Hydraulic Power Pack..............................................................................................................................3
Control Cab .............................................................................................................................................4
High Pressure Mud Pump .........................................................................................................................5
Mixing Unit – Mud System.......................................................................................................................6
Recycling Unit – Mud System..................................................................................................................7
TECHNICAL SPECIFICATIONS
HDD 100T RIG
Technical Specs HDD100t Rig-2006 rev1.doc Page 3 of 7
HDD Rig with integrated hydraulic powerpack
- Carriage travel Rack and pinion
- Working stroke length 11,000 mm
- Pull Force max. 1,100 kN
- Push Force max. 1,100 kN
- Push/Pull Travel 30 m/min in High gear
2 m/min in Low gear
- Torque (rotary power head) 50,300 Nm
- Max. Rotation 1st Gear 50 kNm / 40 RPM
2nd Gear 25 kNm / 80 RPM
- Drilling inclination 8° – 22° Mast is hydraulically driven
- Breakout vices Breakout torque 75 kNm
Clamping range 105-215 mm
- Control cabin Joystick operation with electro-hydraulic
Air conditioned control cabin 4 kW
Instrumentation: analogue/digital
- Weight 27,000 kg
- Size Length: 15,300 mm
Width: 2,500 mm
Height: 3,200 mm
- Chassis Length of moving gear (tracks) 3,900 mm
Width of moving gear (tracks) 2,450 mm
- Transport Low-loading truck (heavy haul)
- Carriage calibration Forces and torque readings can be inspected and configured. Calibration of
sensors can be carried out on site.
Hydraulic Power Pack
- Drive: 6-Cylinder DEUTZ Turbo Diesel with super noise reduction
- Performance: 273kW at 2,400 RPM
- Hydraulic pump for Push/Pull: max. pressure 320 bar
- Hydraulic pump for fan drive: max. pressure 120 bar
TECHNICAL SPECIFICATIONS
HDD 100T RIG
Technical Specs HDD100t Rig-2006 rev1.doc Page 4 of 7
Bore unit with integreated hydraulic powerpack
Control Cab
- Container 10’ Shipping container
- Interior layout Insulation, heater, air conditioner, vandal-proof
- Controls Precise, sensitive control over all functions. Limits for push/pull forces can be
set and the torque adjusted separately for each direction.
- Weight 1,850 kg
- Size Length: 3,000 mm
Width: 2,400 mm
Height: 2,500 mm
Control cab
Controls & instrumentation
TECHNICAL SPECIFICATIONS
HDD 100T RIG
Technical Specs HDD100t Rig-2006 rev1.doc Page 5 of 7
High Pressure Mud Pump
- Manufacturer: Halliburton or METAX equivalent
- Length: 6,058 mm
- Height: 2,591 mm
- Width: 2,438 mm
- Weight: 12,500 kg
- Technical Details:
- Plunger: ∅ 5 inch
- Max. Volume: up to 1870 l/min / pump
- Max. Pressure: 400 bar
- Power engine: 400 kW
- RPM: 2100 min -1
- Suction connection: 6” Perrot
- Pressure connection: 3” Weco
Pictured: Halliburton HT400 pump
TECHNICAL SPECIFICATIONS
HDD 100T RIG
Technical Specs HDD100t Rig-2006 rev1.doc Page 6 of 7
Mixing Unit – Mud System
- Weight and Dimensions
- Length: 6,058 mm
- Height: 2,591 mm
- Width: 2,438 mm
- Weight: 6,500 kg
- Technical Details
- Tank volume: 2 x 7 m³
- 2 x Agitator with 2,2 kW Electric Motors
- 1 x Hopper
- 1 x Centrifugal pump 15kW (Transfer pump)
- 1 x Centrifugal pump 30kW (Mixing pump)
- Solids addition 200 kg / min (Bentonite)
- Power requirement 80 kVA
TECHNICAL SPECIFICATIONS
HDD 100T RIG
Technical Specs HDD100t Rig-2006 rev1.doc Page 7 of 7
Recycling Unit – Mud System
- Standard 20´ Container tank
- Weights and Dimensions:
- Length: 6,050 mm
- Height: 2,591 mm
- Width: 2,438 mm
- Weight: 7,800 kg
- Technical Details
- 2 x Agitators
- 2 x Centrifugal pump
- 1 x DERRICK shaker double deck
- Screen area 5,6m² including 3 x 10“ Hydrocyclones (Desander)
- 1 x DERRICK shaker 3P
- Screen area 2,8m² including 14 x 4“ Hydrocyclones (Desilter)
- Recycling capacity approx. 2,500 L/min with 20% solids at a Viscosity of 80s