+ All Categories
Home > Documents > Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Date post: 20-Dec-2015
Category:
View: 215 times
Download: 1 times
Share this document with a friend
Popular Tags:
12
Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006
Transcript
Page 1: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Technical Topic Presentation

SPRINGS

Presented by: John Helme

November 15, 2006

Page 2: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

What’s the Problem?

3’x7’ curtains need to be extended and contracted.

What’s a Solution? Wrap the curtains around a shaft. Extend the

curtains using a motor, retract the curtains using springs.

Page 3: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Hook Law

BRIDGEPORT, Conn : The City Council approved a new ordinance requiring coat hooks in all public bathrooms.

The councilman who offered the proposal says no one should have to leave their coat or other belongings on unsanitary floors.

Page 4: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

What we already know.

Hooks LawF = -kx

F = restoring force

k = spring constant

x = displacement of spring from equilibrium

Potential Energy in a compressed springU=(1/2)kx2

Page 5: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Combinations of Springs

Two springs in parallel:

keff = k1 + k2

Two springs in series:

keff = k1*k2/(k1 + k2)

Page 6: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Types of Springs

Compression Extension

TorsionSpiral Torsion

Power TorsionClock, Constant Force

Page 7: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Where do springs come from? Distributor – McMaster-Carr

Stock Sizes Manufacture

Large quantities Sample kits Design assistance – software, engineering

Fabrication Shop Small quantities

Page 8: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Distributor Price Sheet

www.mcmaster.com

Page 9: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Design Software

Page 10: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Fabrication Shop

Pricing Equation: Cost of material Setup time Manufacturing time Cost for secondary and finishing work like plating Profit Shipping

Page 11: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

Spring Fabrication

Parts

Outside Housing

Coil

Coil Length = Extension length * = 36”

Number of turns = Extension length/(ID of housing * pi) *1.15

Minimum ID = Number of Turns * thickness of Coil material *2 + .25”

Page 12: Technical Topic Presentation SPRINGS Presented by: John Helme November 15, 2006.

How Does the Window Shade Work?

Do not know. They are impossible to take apart when a spouse is nearby.

Good thing it’s early in the design phase of the project.


Recommended