When I was constructing my product, I used many different technologies. The main type of technology I used was photoshop. I am going to go through the many different tools I used and how they helped me create my product. From this I will be using screenshots, to show how the tools I used manipulated the image. I will show before and after photographs of the changes I made. This will demonstrate what I have learned over the time I have made my magazine. I am now going to analyse the techniques I used in my video. Therefore I can explain how these have enhanced and changed the construction of my product.

I changed the brightness of the image. I did this by going onto image, adjustments and then onto brightness/hue. I then increased the brightness of the image. This helps make the image look more professional and something that would be featured in a magazine. The first tool I used in my video is the quick selection tool, you can either select the outline of something in the image or you can use it to push the tool away from the outline. This allows for the

To finish cutting out the background of the image I used the polygonal lasso tool to neaten up the background I had missed when using the quick selection tool. This allowed for awkward parts

image to be cut away from the background and it is neat and precise. I then deleted the selected area of the image. The edges around Brooke are not neat, however I went back to this later on in the video. I then used the quick selection tool to select the other side of the image. I used the minus quick selection tool because the stripes on the costume were selected. I then deleted the selected areas. By using the quick selection tool I was able to delete the background of the image, this allows for the image to be put in front of another layer on photoshop. Therefore this is something that producers of a magazine would do. So this makes my product conventional. Also the background of the image is usually of a green or yellow colour. So by removing it the image looks clearer and more appealing.

of the image’s background to be deleted easily and quickly. This allowed the finished result to look professional. Also it allowed me to make sure none of Brooke’s hands or hair was deleted when I used the quick selection tool.

To remove dark circles and the shadow around Brooke’s eye I used the patch tool. This allowed me to even out her complexion. I first drew around the section of the face that needed changing. Then I dragged the selected area and moved it to the area of the face I wanted to replicate. This changedthe colour of the original selected area. After doing this Brooke’s face looked flawless, this is something the creators of magazines would do. This is because they want the model to appear perfect to the audience, so by erasing any imperfections they can do this. This is why I choose to edit Brooke’s face. It makes the photographs look professional.

The photograph I chose to demonstrate some techniques and tools I have learned to use had half of Brooke’s hair cut off. I chose this on purpose, this is because I wanted to show how I have learned to clone parts of the image. I used the clone stamp to create the other half of Brooke’s head. I did this by pressing alt and clicking on the part of the image I wanted to clone; then I drew the parts of the image I wanted to fill in. In this video I rushed editing Brooke’s hair. When I was making my magazine I tool I spent more time using the tool. This is because I wanted my product to look professional and neat.

To whiten Brooke’s teeth I used the polygonal lass tool to draw around her teeth. Once I had drawn around the teeth I went onto saturation and hue in the adjustments tab on the tool bar. Next I clicked on the option that gave me a list of colours, I clicked on yellows. Then I increased the brightness of the selected area. This made her teeth sparkling white, this method is something existing magazinesdo to their models featured in their magazine. In this video I rushed this and therefore Brooke’s outline of her teeth did not blend in or look natural. However when I was doing for my front cover it took me several hours to perfect her teeth. I merely rushed to show the effect of this technique I had learned.

I am now going to discuss and explain what camera I used to photograph my images for my product. The camera I used was the Canon EOS 1200d. I chose this because I knew the quality of the camera would reflect in my photographs. This camera is something that I would expect professional photographers to use, therefore the photographs I had taken for my product were to a very high standard. Along with using this camera I used the three point light system. This set up is where there are three different lights, two at either side just outside the frame and one in front of the camera. However to make sure the one in front of the camera does not appear in the frame, I moved it slightly to the left. This lighting system helps create a professional finish to the photograph. Also it helps the camera capture photographs without shadows. As in the green room where I was taking my photographs before I used these lights Brooke’s shadow was appearing on the white backdrop. I have now included diagrams of the three point lighting system, to show a visual of what the set up looks like.

I used both Microsoft Publisher and Powerpoint when I was doing my planning and research. Also I have used these when doing my evaluation. I have used Publisher for many different things but I have mostly used it for photoshop process step by step guides. This is because it is simple to use but also on Blogger you cannot upload Word documents, therefore I had to use Publisher. This is because I can save my files as an image. Using Publisher for my coursework has been useful, this is because I to use many different types of media on my blog. Also I made my digital drafts on Publisher, this helped me design my product. I have learned a lot this year about technology and one of the things I have learned is how to maximise the tools available on Publisher. This is because I now know that there are many tools on this software that helped my design process. Also I have used Powerpoint for my evaluation, I have either saved these as images or uploaded them on to SlideShare. Again this allows me to use different technologies and media. Powerpoint has been very helpful when I have been doing my evaluation. This is because it is very simple to use and helps make my work look organised.

Blogger is where all my coursework is uploaded, this ensures that it is organised, portable and easy to access. Before making my product I did not know how to use Blogger but now I have learned all the different aspects to the website. For example I have learned how to make blog posts and add images to these. However that is very simple and was something I learned quickly. Whereas learning how to embed YouTube videos and Prezis on my blog was more complex. By learning how to do this I got to add many different forms of media and technology onto my blog. Therefore my work became more interesting, as it was not just text. I thought of various ways I could incorporate the work I had been set into videos and prezis. This is because I wanted my blog to be different and to stand out. Using Blogger allowed me to format and organise my work. I made sure my work was easy to find and very clear. I did this by including titles to my blog posts. These clearly set out what is in the blog post. Below are print screens of my blog.

I learned how to upload videos to YouTube and also how to embed them onto Blogger. The videos I made and uploaded onto YouTube were for my planning and research or for my evaluation. Some of the videos I made I edited together. This is something I learned whilst making my product. Below I have included pictures of the videos I made for my coursework.

I used GoAnimate for question five of my evaluation. This is because I wanted to use various media platforms for my coursework. Using GoAnimate was quite easy. All I had to do was pick a setting, add characters and add speech. I am going to include a picture of the video I made for my evaluation.

I used SlideShare for my evaluation, this is because it looks professional and was easy to use. At first I found it difficult but then I soon realised I just needed to upload a Powerpoint to the website. Once they were on SlideShare I learned how to embed them onto my blog. Therefore you can access the slide show on my blog. This helps keep my work organised and tidy. I am going to include a picture of SlideShares I have put on my blog.

I have also used Prezi to present my work. This type of media is a type of slide show, where you can add images, videos and music. I have done all of the above on some of my Prezis. Also I created a custom theme for my Prezis; I did this because I wanted all of them to be the same colour and to have the same layout. This is because it provides continuity to my blog. I made a custom theme for my Prezis by going on customize, then going onto advanced. After I clicked this I created my chosen colour scheme for my theme. I have made many Prezis, these allow me to show my work on a different type of media. I am going to include a picture of one of my prezis and a picture of the advanced customize setting.