NEW PRODUCT SUPPLEMENT - SEPTEMBER 2014 SCUSL1 Portable Lithium-Ion Jumpstarter Pack, 12000mah • Lithium-Ion powered jumpstarter with 12,000 mah battery • Integrated battery management ensures polarity protection, over/under charge protection, and unlimited connection protection • Digital display to show voltage and charging status • Contoured design with textured grip for secure handling • Includes car and wall charger for added convenience Compact and powerful Lithium-Ion portable jumpstarter with integrated battery management offering protection against reverse connections, over and undercharging, as well as leaving the unit connected to a vehicle while running. This product comes with a digital display screen showing voltage and starting status and includes both a wall and car charger. The entire unit is shipped in a soft case for easy organization. Comes with a 1 year warranty. IRT2235QTiMAX 2235 Series 1/2" Quiet Impact Wrench IRT2235TiMAX 2235 Series 1/2" Impact Wrench • Power: Punish the toughest bolts with 1,350 ft-lbs of nut busting torque, powered by Ingersoll Rand’s finely tuned twin-hammer impact mechanism • Weight: At only 4.6 pounds, no other impact wrench on the market can match the combined power and weight of the 2235 Series • Reliability: Every component, every mechanism and every function of the 2235 Series has been put through hell to ensure it always performs in the face of the toughest jobs • Backed by a 2-Year warranty, the 2235 Series is a finely tuned workhorse • One-handed forward/reverse control, feather-touch trigger, and 4-position power regulator Introducing the Ingersoll Rand 2235 Series Impactool™, a tool that’s light in your hand but strong enough to punish the toughest jobs. With 1,350 ft-lbs. of nut busting torque and a weight of only 4.6 lbs., the 2235 has the best power-to-weight ratio of any impact wrench on the market. Making it powerful, durable, and reliable enough for any job that comes your way. Backed by a 2-Year warranty, the 2235 Series is a finely tuned workhorse. 1.350 FT-LBS OF NUT BUSTING TORQUE FIRST TO MARKET EXCLUSIVE 120XP™ Universal Spline XL Ratcheting Wrench Sets • 120XP™ Universal Spline XL Ratcheting Wrenches have double-stacked pawls to produce the 120 positions and three-degree swing arc, to turn a fastener in tighter confines • Reduced Diameter Ratcheting Box-End and Open-End for increased access • XL Beam Design is up to 25% longer for improved reach and leverage • Universal Spline Drive works on 5 different fasteners including 12-point, 6-point, Spline, E-Torx, square and also rounded 6-point, for convenience • Bright full polish chrome finish • Highly visible, recessed color size markings • Meet or exceed ASME performance requirements • Dual Direction Surface Drive® on the open end provides better grip and reduced fastener rounding • For organized storage, sets come with a compact, easy-grab V-rack KDT86426 - 14 Piece, Metric (6 - 19MM) KDT86450 - 11 Piece, SAE (1/4” - 3/4”) $260.85 $199.99 $458.35 $449.99 $183.35
Transcript
NEW PRODUCT SUPPLEMENT - SEPTEMBER 2014
SCUSL1Portable Lithium-Ion Jumpstarter Pack, 12000mah• Lithium-Ion powered jumpstarter with 12,000 mah battery• Integrated battery management ensures polarity protection, over/under charge protection, and unlimited connection protection
• Digital display to show voltage and charging status• Contoured design with textured grip for secure handling• Includes car and wall charger for added convenience
Compact and powerful Lithium-Ion portable jumpstarter with integrated battery management offering protectionagainst reverse connections, over and undercharging, as well as leaving the unit connected to a vehicle whilerunning. This product comes with a digital display screen showing voltage and starting status and includes both awall and car charger. The entire unit is shipped in a soft case for easy organization. Comes with a 1 year warranty.
IRT2235QTiMAX2235 Series 1/2" Quiet Impact Wrench
IRT2235TiMAX2235 Series 1/2" Impact Wrench• Power: Punish the toughest bolts with 1,350 ft-lbs of nut busting torque, powered byIngersoll Rand’s finely tuned twin-hammer impact mechanism
• Weight: At only 4.6 pounds, no other impact wrench on the market can match thecombined power and weight of the 2235 Series
• Reliability: Every component, every mechanism and every function of the 2235 Series hasbeen put through hell to ensure it always performs in the face of the toughest jobs
• Backed by a 2-Year warranty, the 2235 Series is a finely tuned workhorse• One-handed forward/reverse control, feather-touch trigger, and 4-position powerregulator
Introducing the Ingersoll Rand 2235 Series Impactool™, a tool that’s light in your hand butstrong enough to punish the toughest jobs. With 1,350 ft-lbs. of nut busting torque and aweight of only 4.6 lbs., the 2235 has the best power-to-weight ratio of any impact wrenchon the market. Making it powerful, durable, and reliable enough for any job that comes yourway. Backed by a 2-Year warranty, the 2235 Series is a finely tuned workhorse.
1.350 FT-LBSOF NUT BUSTING
TORQUE
FIRST TOMARKETEXCLUSIVE
120XP™ Universal Spline XL Ratcheting Wrench Sets• 120XP™ Universal Spline XL Ratcheting Wrenches have double-stacked pawls to produce the 120 positions and three-degree swing arc, to turn a fastener in tighter confines
• Reduced Diameter Ratcheting Box-End and Open-End for increased access• XL Beam Design is up to 25% longer for improved reach and leverage• Universal Spline Drive works on 5 different fasteners including 12-point, 6-point, Spline,E-Torx, square and also rounded 6-point, for convenience
• Bright full polish chrome finish• Highly visible, recessed color size markings• Meet or exceed ASME performance requirements• Dual Direction Surface Drive® on the open end provides better grip and reduced fastenerrounding
• For organized storage, sets come with a compact, easy-grab V-rack
AGSACRK-KLEDGEKledge-Lok Master Kit with Free Storage Cabinet• Complete automotive A/C repair solution• KLEDGE-LOK™ tool included• 10 foot lengths of reduced barrier A/C hose included• Metal storage cabinet to hold tackle box kits• Condenser repair ends and aluminum A/C tubing included
The KLEDGE-LOK™ master kit comes with everything needed to start repairing automotiveA/C systems quickly and economically. The metal storage cabinet will hold the KLEDGE-LOK™ tool and 4 tackle box assortments. The master kit comes with the SLK-2, ACRK-1,ACRK-2, ACRK-4, A/C reduced barrier hose, and hose cutter.
TIT55010Infrared Thermometer• Ideal for measuring surface temperature of objects• Temperature Range: -26 degrees Fahrenheit - 716 degrees Fahrenheit• Laser Sighting Power • Spot Ratio: 12:1• Emissivity: 1.10 - 1.00 • Accuracy: +/- 2%• Auto power off • Backlight• Display hold • Adjustable emissivity
TOT30313-1Aerospace Protectant Trigger Sprayer, 32 oz• Matte finish with no oily and greasy residue• Keeps treated surfaces looking new• Prevents fading and cracking, and restores lost color and luster• Powerful UV blockers• Anti-Static, repels smudges, dust, soiling, and staining
THX512Bosch Jumper Wire Test Kit• Bosch jumper wires allow the technician to test current inside circuits• Can be used as single test leads or as jumper wires• Jumper wire kit allows testing for connectors using Bosch BDK and JPT terminals• Terminal tools included to remove damaged terminals from connector• Includes carry case
IPA8086Ergonomic Light Socket Brush• Brass and stainless steel • Ergonomic handle• Cleans side and bottom of socket with one pass• 1157 light bulb sockets and similar applications• Made and assembled in the USA
65 Quart ProGear™ Elite Outdoor/Offshore Cooler• Up to 10 days ice retention, freezer grade gasket, 2" polyurethane insulation• Press and pull latches (wide for gloved use)• Non-skid and non-marking raised feet• Sloped drain and tethered threaded plug (garden hose attachable)• Integrated fish scale on lid• Dual handle system• Molded-in tie downs and lock hasp• Stainless steel hardware and corrosion resistant
PEL32-65Q-MC-WHT• White
PEL32-65Q-OC-TAN • Tan
TIT36006Pocket Flashlight• Overall length: 5.5" • Diameter: 5/8"• Includes 2 AAA batteries • Convenient pocket clip• 1 Watt LED bulb that generates 90 Lumens
$27.15
$391.65
$391.65
$24.99
$73.35
$28.15
$1,669.00
$44.99
or $53.00/48mo.*
4
NEWITEMS
OTC3940-HD550 Series Auto Ranging Multimeter Kit• Professional grade multimeter kit for heavy duty truck repair• Non-intrusive AC/DC current measurement• Powerful professional grade test functions: frequency, dutycycle, diode and continuity tests
• 5 ft. extended length test leads provide improved reach• Detachable probes allow use with amp probe
WAE76564COP (Coil-On-Plug) Interceptor• Real-time display of Breakdown (kV) and Burn Duration (mS)
• Easy two button operation• Auto-set gain calibration• Misfire indicator and counter• Identifies cylinder contribution
COP Interceptor provides advanced ignition diagnostics over and above scan tools and issimpler than an oscilloscope to operate. Measure, display, and save each coil on plug’ssecondary ignition data in real time for detailed ignition analysis. View Trend data forvisual verification of intermittent misfires that may not set codes. The 6’ cable with 9”probe (2 1/2” bendable arm) allows access to those hard to reach COP’s. The Auto-setfunction means COP Interceptor works on multiple styles of COP ignition systems. NoCOP removal required for use.
ESI618Mini Back Probes/Wire Piercers• Great for backprobing weather pack style connectors used with numerous automotive sensors
• Also very handy for piercing and tapping readings on smaller gauge wires - using the included probe adapters
• Works with most Test Lead Kits in the field - with standard 4mm banana plug test lead• Set includes four probes - red, black, green, yellow• Test probes 21 mm length
This is an affordable set of back probing test probes which serves dual purposes. Onefunction is to back probe the wire at the rear of the wire harness/connector. This way, thetech avoids having to poke holes in the wire. The small diameter probe can slip into theback of the wore connector and make connection with the signal under test. The secondfunction is the ability to pierce the wire if needed by using the supplied end piece adapter.Although piercing the wire is not advisable, sometimes it just can not be avoided. This setof probes can work with most standard test lead kits in the field. There are four probesincluded with this part number.
ESI183"Essentials of Electric Power Generation"By Dan Sullivan• 125 pages - full 8.5 x 11 inch page size - of everythingyou need to know about Electric Power Generation
• Power Factor explained, Basic Concepts, Data Plate vs.Load, RV Gensets, Real Power vs. Apparent Power
• Cable sizing, Prime Power vs. Standy Power, TransferSwitches and Breakers, Harmonics
• Loadbanking, Why?, What?, Cable Connections, Testing and Procedures
ADT14-420Key & Remote Programming, 11th Edition• Clear, step-by-step procedures for programming vehicle keys and remotes
• System operation explanations, including unusual features• Illustrated battery replacement information for keys and remotes• Notes whether special tools are needed for programming• Portable print format goes in the vehicle, in the bay, or on the road• Year Coverage: 2000 – 2014• Model Coverage: Domestic and imported cars, vans, and light-duty trucks
CAL74Amp Hound• Check current in a circuit without removing the fuse• Find parasitic drain quickly and easily• Saves time in diagnosing problems• Gives a reading on a live circuit• Intelligent audible tones and digital display
An all new way to measure amps! No need to remove a fuse which reduces the amount oftime to determine the current in the circuit. Finding parasitic drains can now be donewithout removing a fuse or resetting the offending circuit. No more pull a fuse, check themeter, pull a fuse, or check the meter. Instead check the complete fuse box quickly.
CDOBATPBattery Tester• The complete solution to testing all 12V batteries from SLI to AGM
• Performs battery test on or off the vehicle whiledisplaying results on the easy to read screen
• Tests the electrical system of the car including starter,alternator, and engine/chassis ground
• Integrated thermal printer lets you print out test resultsquickly for your customer
• Customize your PC printout to add your name and customer information
• Easy to use and fast
CDOOBDADSOBD II Memory Saver• Prevents data loss due to battery disconnection during replacement• Can be used on OBD II Compliant vehicles from 1996 and up• Strong clamps for a secure connection to an external 12v supply• Safer connection than cigarette lighter style connectors• Easy to carry and use
BA12 Volt Memory Maintainer. Accesses Vehicles OBD-II connectorand hooks directly to a 12 volt battery using alligator style clamps.Optional accessory to OBD Aid Diagnostic Breakout Box.
$483.35
$48.82
$365.00
$109.99
$11.65
$64.99
$381.67
$98.35
FLU233/AFLU88-5FLU87-5FLU115
5
NEWITEMS
CTE56-870Comfort Indicator With Cig Plug Connection• Charge your battery through your vehicles 12v socket• Lights give you status of battery - green, yellow, red• Easy and safe to use• Instantly tells your battery's status• Ideal for vehicles with hard to reach batteries*Note: Socket must be live when ignition is in the “off” position.Compatible with CTEK US 0.8, MUS 3300, MUS 4.3 & MUS 7002
CTE56-382Comfort Indicator With Eyelet Connection• Status of battery instantly once connected• Safe and easy to connect right to battery• Quick connect to CTEK battery when light goes to yellow or red• Accessory for all CTEK battery chargers• Leave it on your battery
CTE56-353MULTI US 7002 12V BatteryCharger and Maintainer • Battery charger for HD trucks, large boats, automobiles, and RVs• Reconditioning mode extends life of your battery• Safe and easy to use - automatic on/off with sensor to read battery• Supply mode feature to retain computer settings of vehicle while battery is removed• Smartest battery charger in the world• Includes two interchangeable connection leads, one with clamps, and one with eyelet terminals.
CTE56-674MULTI US 25000 Battery Charger - Shop Unit• Professional 12V Charger - For the mechanic/shop of Do it Yourselfer• Replaces 70 amp wheel charger - all the power in a much smaller unit• Safe and easy to use - reverse polarity protection• Supply mode to retail computer settings when battery is removed from car• Reconditioning mode extends battery life
CTE56-864MUS 4.3 12V Battery Charger and Maintainer• Battery Charger and Maintainer for cars, trucks, and boats• Reconditioning mode to extend the life of battery• Safe and easy to use - auto on/off with sensor to read battery• Shock proof and water resistant• Smartest charger in the world• 5-year warranty• Fully automatic charging and maintenance in 8 steps maximizes battery life andperformance
• Numerous accessories simplifies using the same charger for multiple batteries• Patented maintenance charge for a unique combination of maximized life andperformance
• Patented desulphation that extends the battery life• Automatic detection of end-of-life batteries that eliminates surprises
CTE56-865US 0.8 12V Battery Charger• 12V charger for motorcycles, ATVs, lawn tractors,snowmobiles, and small watercrafts
• Safe and easy to use - automatic shut off/on withsensor to read battery status
• Waterproof, shock proof, and reverse polarity protection• Patented desulphation to extend battery life• 5 year warranty• Fully automatic charging and maintenance in 6 steps maximizes battery lifeand performance
• Numerous accessories simplify using the same charger for multiple batteries• Patented maintenance charge for a unique combination of maximized life andperformance
• No sparks, short-circuit proof and reverse-polarity protected for untroubled usage
® ®
$86.65
$49.99
$153.35
$308.35
$15.49
$12.32
6
NEWITEMS
VIMWS575-in-1 Auto Tech Wiring Tool• 7" Long Automotive Electrical Wire Tool• Use for wire cutting and stripping• Use as pliers for grab and twisting• Use for crimping of insulated and non-insulated connectors• Satin chrome plated with red textured grips
Half Cut Impact Driver Sets• Impact Quality, Approved for Hand & Power Tools• S2 Steel, Fully Heat Treated, & Gun Metal Gray Plating• 1/2 Cut - Hi Torque Impact Divers• Heavy duty case with tray for hand held impact driver,extensions, or other accessories
VIMIMPACT-SFP610 Piece Half Cut, Flat and Phillips Head Screwdriver Set - 3/8" Sq. Drive• Approved for Hand and Power Tools• S2 Fully Heat Treated and Gun Metal Gray Plating• 1/2 Cut High Torque Impact Drivers• Impact Phillips Head P1 thru P4; Impact Flat Head 1/4" thru 3/4"
1/2 CUT IMPACT DRIVERS
Master Socket Sets• Surface drive technology virtually eliminates the rounding of fasteners• Entry angle guides fastener into socket• Large hard-stamped size identification• Double line (SAE) and knurled (METRIC) ring to easily identify Standard vs. Metric Sock• Full polish chrome finish cleans easily and resists corrosion
This high value socket set selection provides the full range of 1/4 sockets offered byGearWrench to solve just about any fastener challenge. Sets are packed on easy-to-useclip rails for quick access.
Ratchet and Drive Tool Sets• Gimbal ratchet design allows pivoting in two directions for easier access• Gimbal 72-tooth ratcheting mechanism for 5 degree swing• 84-tooth ratchet with 4.3 degree arc• 84-tooth ratchet has low profile head with flush mounted on/off lever and flex head foradjustable access angle
• 120-position ratchet gives 3 degree arc and increased access
Nobody knows ratcheting better than GearWrench. This set includes a wide selection ofratchets and extensions needed to attack any application.
KDT80328 - 18 Piece 1/4" KDT80575 - 17 Piece 3/8"
120XP Universal Spline XL GearBox™ Flex, 10 Piece Sets• 120 position ratcheting mechanism for 3 degree swing arc• Spline drive to work on more types of fasteners• Longer beam to increase reach• Reduced ratcheting end diameter for increased access• Dual Surface Drive on open end
120XP™ Universal Spline XL Ratcheting Wrench Sets with Flex-Head• 120XP™ Universal Spline XL Ratcheting Wrenches have double-stacked pawls to produce the 120positions and three-degree swing arc, to turn a fastener in tighter confines
• Reduced Diameter Ratcheting Box-End and Open-End for increased access• XL Beam Design is up to 25% longer for improved reach and leverage• Universal Spline Drive works on 5 different fasteners including 12-point, 6-point, Spline, E-Torx, squareand also rounded 6-point, for convenience
• Ratcheting Flex-head Box-End gives adjustable access angle• Bright full polish chrome finish• Highly visible, recessed color size markings• Meet or exceed ASME performance requirements
Introducing the Ingersoll Rand 2235 Series Impactool.™ A powerful, durable and reliable workhorse whose reputation is built on helping you build yours, because you don’t do a job halfway, and neither do our tools.
THE BAR DOESN'T RAISE ITSELF.
FOLLOW US. #IRTOOLSFor these and more Mail-in Rebate forms visit
ingersollrandproducts.com/rebates
Purchase between Sep. 1 and Sep. 30, 2014to receive sn Ingersoll RandFender Cover via mail.
LOW PROFILE IMPACTOOLSTM
HAMMERHEAD 2015MAX & 2025MAX
SEPTEMBER 2014
• 180 �-lb of max torque and 7,100 rpm• Feather-touch trigger, 2-position
forward power regulator and convenient forward/reverse ring
• Head height under 2” and reactionless torque
8
NEWITEMS
SteelmanPRO Cobra XL Flex Head Locking Ratchets• 90 Tooth Mechanism requires only a 4 degree swing• Locks in 7 different positions• TPR Ergo Grip reduces hand fatigue• Longer than standard wrenches to increase torque performance• Tested over 150% of ANSI spec
SteelmanPRO Cobra Flex Head Ratchets have a 90 tooth mechanism requiring only a 4degree swing. They lock in 7 different positions allowing the user to get the best fitpossible on the fastener. These ratchets are longer than standard ratchets whichincreases allowable torque. The SteelmanPRO Cobra Flex Head ratchets test at 150%+of the ANSI spec.
VMPVT-001-7SJVamPLIERS™ Slip Joint Pliers With Patented Curved Jaw• VamPLIERS™ Technology - uniquely designed concave shaped jaws with vertical and horizontal serrations on the inside jaws which make it possible to grab on to a stripped/rusted/corroded screw or rounded nut for extraction
• Works on special screws like Torx, single-sided, tamper-proof, security, or any unique head
• Slip joint allows flexibility to remove bigger size screws or nuts/bolts; slim nose to access confined areas
• Made from treated high quality carbon steel from Kobe in Japan, inside jaws hardenedto provide strong grip to target screw or nut/bolt
Pneumatic Pilot Punches• Used with a pneumatic tool• Heavy duty S2 steel• Black oxide finish for additional rust protection• Made in the USA
MAY31950 • #8 1/4"
MAY31951 • #9 5/16
MAY31952 • #10 3/8"
MAY31953 • #11 7/16"
MAY31954 • #12 1/2"
TMRHC8609Hand Held Pinch Clamp Ratchet Crimper• Can be used with all standard pinch clamps for the repair of flexible and inflexible thin walled hoses
• Installs all standard pinch clamps• Unique "tab" design provides crimping access to hard to reach spaces• Constructed of high quality carbon steel• No gauging or tool calibration necessary
MAY3734510 Piece Screw and Pipe Extractor Set• Removes broken screws, bolt, and studs pipes• Removes pipes• Extractors designed to cover a range of 1/4" to 1- 1/2"• Storage case included
THE MAIN RESOURCE
FOW74-150-005Rotocal Reach Electronic Rotor Gauge• Measures most rotors while the wheels are still mounted on the vehicle• Range: 0-3.25"/0-82.5mm; Resolution: .0005"/.01mm (fractions in 1/64" increments)• Solid 1 piece construction• Water resistant to IP54 standards• Twin conical anvils with the ability to measure low points on both sides of the rotor
$111.65 $74.95$130.65$78.35$105.85$141.65
$47.49
$28.65
$29.15
$29.99
$30.85
$31.65
$116.65
$58.25
9
NEWITEMS
MLW2667-21CTM18™ Cordless 2-Speed 1/4" Hex Right Angle Impact Driver• 1.4" Head allows for greater access to complete a wider varietyof applications
• 2-Speed Drive-Control™ offers greater control over applications• 1/4" hex drive with 1" bit acceptance for tighter accessibilityand a wider range of useable accessories
• Extended paddle switch for multiple grip options
MLW2791-22CTM18™ FUEL™ Cordless 2-Tool Combo Kit, featuring M18™ FUEL™1/2" Drill/Driver and M18™ FUEL™ 1/4" Hex Impact Driver• POWERSTATE™ Brushless Motor: Drill Driver - Delivers up to 725 in-lbs of torque withmaximum sustained torque to complete the toughest of applications
• POWERSTATE™ Brushless Motor: Impact Driver - Delivers up to 1,600 in-lbs of torquewith maximum sustained torque to complete the toughest of applications
• REDLITHIUM™ Battery Technology: Superior pack construction, electronics, andperformance deliver more work per charge and more work over pack life than anybattery on the markets
• REDLINK PLUS™ Intelligence: The most advanced system of cordless power toolelectronics. Provides optimized performance and overload protection using total systemcommunication between tool, battery and charger
• Heavy duty carrying case and multi-voltage charger are also included
MLW2696-22CTM18™ Cordless Drill Driver / Hackzall Kit• Milwaukee® 4-Pole Frameless Motor: Features a robust design combinedwith rare-earth magnets for longer life, best-in-class 425 in-lbs of torqueand 0-500/0-1,500 RPM
• Single Sleeve Ratcheting Chuck: All-metal ½” chuck optimizes gripstrength and reduces slippage
• One-handed design provides superior control and versatility over astandard reciprocating saw
• Compact size allows for cutting in tight spaces, and light weight makesoverhead work easier
• REDLITHIUM™ Battery Technology: Superior pack construction,electronics, and performance deliver more work per charge and morework over pack life than any battery on the market
Milwaukee Step Drill Bits • JAM-FREE Performance: Dual-flute design provides greater speed and control• Up to 2X faster: Optimized for cordless drills in high speed• Rapid Strike™ Tip: Creates fast, accurate starts and generates less heat• Up to 4X longer bit life: Optimized geometry with Black Oxide coating to cutfaster and produce less heat
• Laser-engraved reference marks: Easily stop on any hole size
MLW48-89-9221Milwaukee 3 Piece Step Drill Bit Set (#1, #2, #4)• JAM-FREE Performance: Dual-flute design provides greater speed and control• Up to 2X faster: Optimized for cordless drills in high speed• Rapid Strike™ Tip: Creates fast, accurate starts and generates less heat• Up to 4X longer bit life: Optimized geometry with Black Oxide coating to cut fasterand produce less heat
• Laser-engraved reference marks: Easily stop on any hole size
M18 FUEL™ Impact Wrench Boots• Form-Fitting, Lightweight Design - Sleek design protects the tooland work surface while adding minimal size or weight to the tool
• Flexible - Designed for easy and tool-free install and removal• Durable - Boots are made of a proprietary rubber designed towithstand corrosive materials commonly found in maintenanceenvironments
• Weighs .3 lbs
MLW49-16-2754 - Compact• For use with Milwaukee M18 FUEL™ Compact Impact Wrenches2654-20, 2655-20, and 2655B-20 only
MLW49-16-2763 - High Torque• For use with Milwaukee M18 FUEL™ High Torque ImpactWrenches 2762-20, 2763-20, and 2764-20 only
WHILE SUPPLIES LAST!
$299.99
$566.65
$283.35
$31.65$43.35$53.35$61.65
$124.99
$26.65
$36.65
10
NEWITEMS
NOSNSJ02012 Ton Aluminum Service Jack• Height range: 3.5" to 19.5"• Ultra light aluminum construction at just 49 lbs• Powerful and compact, lifts small to midsize vehicles• Side handle for easy carrying• Complies with the ASME PALD 2009 standard
WIL10300Extra Mounting Bracket for WIL10010• Mount ATV Vise on any horizontal work surface• Includes bracket and hardware• Allows user to transfer bracket to multiple work locations• Perfect for journeyman that works in multiple shops• Mount in a mobile work trailer
WIL10350Carrying Case for WIL10010• Secures with snap locks• Sturdy handle for easy carry• Bold and heavy duty design• Vise not included
This Heavy Duty Locking Hitch Pin has knurled ends for easy locking and un-locking. Madeof hardened steel which will discourage cutting the lock. The rubber cap seals the lock toreduce rust and corrosion. Two keys are included.
TIT41283Auto Darkening Welding Helmet - Skull and Pipewrench• Solar powered: Switching time -light to dark 1/30,000 of a second
• Large 3.86" x 2.17" viewing area• Variable shades from DIN 9 to DIN 13• Durable, light weight material is corrosion resistant and flame retardant
• Ultra high performance filters protects against UV and IR
KTI79800Emergency Safety Flare• Non-chemical safety flare • Positive buoyancy• Nine flash patterns including the USCG approved SOS• Runtime up to 100 hours depending on flash pattern• Shatter-proof, crush-proof, and water resistant• 1 CR-123 battery included
A non-chemical environmentally safety flare. Applications in automotive, industrial,and marine. Nine distinctive flash patterns for emergency situations and work areas.1 Year Warranty.
External Thread Repair Tools • External tools restore inch or metric, right handed or left handed fastener threads• Floating cutters are self-adjusting to any pitch and size within range• No need for calibration or identifying thread types• Automatically chases good thread sections to repair the damaged parts
The Nes ThreadMate is a universal external thread repair tool. This easy-to-use toolsoperate by adjusting the knob that sets the proper diameter of the tool to the thread,and the blades float to the correct pitch. Once the tool fits into a thread slot, beginrepairing the threads by simply rotating the tool. Comes equipped with blades madefrom hardened steel.
ANGNES06040 - 5/32" to 1/2"• Capacity is 5/32" to 1/2"
ANGNES1A - 5/32" to 11/16"• Capacity is 5/32" to 11/16"
ANGNES2 - 11/16" to 1 1/2"• Capacity is 11/16" to 1 1/2"
External/Internal Thread Repair Sets• One hand tool restores inch or metric, right handed or left handed fastener threads• No need for calibration or identifying thread types• Floating cutters are self-adjusting to any pitch and size within range
ANGNES1015 - 3 PieceSet comes with one external and two internal tools. The Nes 1A external thread repair,which has a working capacity from 5/32" - 11/16". Also the Nes 21 and Nes 22internal tools, which have a working capacity from 5/16" - 7/16" and 1/2" - 5/8".
ANGNES1017 - 4-PieceSet comes with one external and three internal tools. The Nes1A external thread repair,which has a working capacity from 5/32" - 11/16". Also the Nes21, Nes22 and Nes23internal tools, which have a working capacity from 5/16" - 7/16", 1/2" - 5/8", and11/16" - 13/16".
ANGNES1025 - 6-PieceContains external NES1A and NES2 with a working capacity of 5/32" - 1.1/2" andInternal NES21, NES22, NES23 and NES24 with a working capacity of 5/16" - 1.1/4".
ANGNES13003 Piece External Thread Repair Set, 5/32" to 6"• External Capacity is 5/32" to 6"• External tools restore inch or metric, right handed or left handed fastener threads• Floating cutters are self-adjusting to any pitch and size within range• No need for calibration or identifying thread types• Automatically chases good thread sections to repair the damaged parts
The Nes1300 is a 3-piece external thread repair set includes the Nes 1A, Nes 2, and Nes 3.The Nes 1A has a working capacity from 5/32" - 11/16". The Nes 2 has a working capacityfrom 11/16" - 1-1/2". Nes 3 goes from 1-3/8" - 6" and is used on large threads that couldbe part of large vehicles and machinery, such as trucks, buses, or tractors.
$299.99
$13.35
$83.35
$33.35
$127.65
$28.32
$35.85
$71.65
$102.49
$239.99
$316.65
$524.99
$536.25
11
NEWITEMS
FNTEM5EcoMaster Non-Heated Bench Top Washer
FNTEM1435HEcoMaster 1435 Portable Heated BrakeWasher, 15 Gallon Drum• Heavy-duty 120 volt pump and 1000 watt heater• Heavy-duty drum dolly with two locking casters and tworegular casters
• Dual filtration system with pre-filter screen and sock filterdesigned to insure clean solution
• Convenient flexible metal spigot for those tough cleaning jobs• Designed for easy servicing, remove basin from drum in minutes
Aqueous heated 120 volt portable brake washer. Heated washers improve detergent anddegreaser performance dramatically. Drum mounted for easy waste disposal. Our dualfiltration system helps to extend the life of the cleaning solution. Equipped with a flowthrough brush and spigot, making your cleaning job fast and easy. The dual purpose covercan be used as a cover or as a catch basin. Use it on alignment lifts, ramp lifts or place iton the floor. For use with an aqueous based cleaning solution.
FNTEM5HEcoMaster Heated Bench Top Washer• 500 Watt heater to make detergents and degreasers more effective• Corrosion resistant heavy-duty pump• Heavy-duty high density polyethylene fluid tank• Soaking capacity up to 4-gallons• Stainless steel lid
Heated table top aqueous parts washer equipped with flow-throughbrush - great for cleaning small parts. Heated parts washers greatlyincrease detergent and degreaser effectiveness.
FOUNTAIN INDUSTRIES
LIN3626Black Polyethylene Used Fluid Drain, 26-Gallon• Heavy-duty 26-gallon tank is molded of durable, lightweight,corrosion resistant polyethylene
• Durable 4” swivel casters and 10” fixed-axle wheels areresistant to shop chemicals and run smoothly across roughshop floors. Large handles on the front and back make thedrain easy to maneuver into position and for storing vital toolsand drain plugs
• Large 17” diameter offset funnel rotates to catch streaming oiland includes a removable filter screen
• Funnel height adjusts from 50 to 75 inches and a 3/4” male camlock styleconnector extends from the top of the tank for quick, clean fluid extraction using adiaphragm pump or other fluid transfer system
• Three large pocket recesses are ideal for allowing used filters to drain. Built-in,easy-to-read fluid level sight gauge
• Includes 6.5 ft. cable and carry case
AMM1100ACoats® 1100 Series Wheel Balancer• Direct Drive Motor With 40MM Shaft• Static-On-Screen®• Behind the spoke tape weight placement• Dual operator mode
The NEW Coats® 1100 Series combines theaccuracy and durability of Coats’ Direct Drivesystem with an exclusive set of easy to usebalancing features designed to get the job doneright the first time, every time.
SYMATFMulti-Fluid Transmission Fluid Exchanger• On Board 12V Battery Power with Charger• 0.1 Quart Increment Service Capability• 32 Quart New and Used On Board FluidTanks
• Three Separate Pumps• Expandable External 32 Quart New Fluid Tanks
All the same features of the Symtech ATF1, now with the new ability tocompletely eliminate cross contamination of new fluids with the use ofexternal new fluid tanks. Can be expanded with an unlimited number of newfluid tanks. No competitor offers the ability to offer unlimited expansion ofseparate new fluid tanks that truly offers the ability to prevent crosscontamination of ATF fluids.
SYMBFA1Brake Flush Assistant• One Person Operation• Single Wheel Application• Adjustable Pressure Regulator• 15 Minutes or Less to Service All Wheels• Includes Adapter Kit with 99% Vehicle Coverage
The BFA1 is a single wheel Brake Flush System that allows for a singleindividual to complete a full brake flush in less than 15 minutes.Includes Master Cylinder Adapter kit with 99% vehicle coverageincluding universal adapters.
UVU570000XVacufill™ 570000X with Waste Pump• Connects easily to all engine cooling systems• Tests for leaks while under vacuum• Refills the entire system in seconds while eliminating airlocks• Large 3 gallon new-coolant fill tank• Large 12 gallon waste-coolant reservoir with pump for easy disposal of old coolant• The most economical coolant exchanger on the market now features an auxiliarypump for emptying the waste coolant reservoir
or $94.00/48mo.*
$5,265.00
$1,999.00
$8,085.00
$2,945.00
$1,815.00
$381.67
$715.00
$831.67
or $64.00/48mo.*
or $58.00/48mo.*or $233.00/48mo.*
or $152.00/48mo.*
12
NEWITEMS
The Bone-ster™ Mechanics Creepers• 100% made in USA• Double ribbed body with 400 lb. capacity• Comfortable ergonomic design• Lifetime warranty on wheels and casters• 3 inch tires to roll smoothly over any shop surfaces
Who says small can't be strong? The Bone-ster™ may be our littlest creeper, but itsdouble-ribbed body gives it an incredible 400 pound capacity! The 3 inch diameter wheelswith grippy tires glide smoothly over shop floors, even if the surface is less than perfect!BNE4031B - BlackBNE4031BL - BlueBNE4031R - Red
The Tail Bone Rough Rider™ Mechanics Creeper Seats• 100% made in USA• 450 lb. capacity• Wide base will provides outstanding stability• Big 5 inch wheels and casters allow this creeper seat to be used in less than perfect realworld locations
• Comfortable ergonomic design with extra wide saddle
The Tail Bone Rough Rider™ has all the features of the standard Tail Bone™, but uses thewheels from the Rough Rider™ creeper, sitting you an extra inch higher off the ground,giving it extra ground clearance and allowing it to be used in outdoor conditions.BNE5131B - BlackBNE5131BL - BlueBNE5131R - Red
The Rough Rider™ Mechanics Creepers• 100% Made in USA• Huge 5 3/8" wheels will easily roll over dirt or gravel with a firm substrate• Comfortable ergonomic design• Lifetime warranty on wheels and casters• 400 lb. capacity
The Rough Rider™ is a beefed up version of the Bone™, made specifically to be usedoutdoors in less than ideal conditions. Extremely popular with military, police, and othergovernment agencies in the US and Canada. The Rough Rider™ is designed to be used onextremely rough pavement, dirt, and even grass and gravel with a firm substrate!BNE7031B - BlackBNE7031BL - BlueBNE7031R - Red
CMF120032000 Lb. ATV/UTV Winch Kit• 2,000 lb. rated pull• Permanent magnet motor• Universal mounting channel• 5/32 in. x 49 ft. galvanized super-duty aircraft cable• 153:1 gear reduction ratio• Kit includes 3 bonus accessories to ensure safe and easy winching.
CMF665253" Semi-Trash Pump• 3" NPT diameter of inlet and outlet• Self priming pump features internal checkvalve holds prime when not running
• Features Silicon Carbide shaft seals• 196cc Champion OHV single cylinder, 4-strokeair-cooled engine
• 3/4" max solids diameter• 343 gallons/minute flow rate• 1.18" Diameter tubular steel frame for protection and durability• Total head 85 ft.; Suction head 26 ft.
The unit is powered by a 196 cc Champion single cylinder 4 stroke OHV Engine with lowoil shut-off, and cast iron sleeve for durability. The unit has a .9 gallon fuel tank and selfpriming pump. The recoil start makes this pump easy to set up and run. CARB approvedfor sale in all 50 states. One year limited warranty.
CMF665262" Chemical Pump• EPDM rubber O-ring• 2" Diameter NPT inlet and outlet• 196cc Champion OHV single cylinder, 4-stroke air-cooled engine
• Pumps chemicals safely• 145 gallons per minute flow rate• .87 inch diameter tubular steel frame for protection and durability• Suction head 23 ft.; Total head 98 ft.
The Champion 66526 2" Chemical Pump is a powerful pump with fiberglassreinforced polyester pump housing impeller and volute for chemical resistance. Theunit has a .9 gallon fuel tank and easy pull recoil start, making it easy to set up andrun. CARB approved for sale in all 50 states. One year limited warranty.
CMF713214000 PSI Trigger Start Pressure Washer• 4000 PSI at 4.0 GPM• 389cc Champion OHV single cylinder, 4-strokeair-cooled engine
• 25 ft. quick connect high pressure hose• Thermal relief valve to protect the pump• CARB approved for all 50 states.
$1,665.00
$698.35
$665.00
$548.35
$148.35
Your Choice: $170.00
Your Choice: $241.67
Your Choice: $265.00
or $53.00/48mo.*
13
APPAREL
Redback Flexfit Hats• Flex-fit technology for premium fit• Designed with one of a kind Redback logo
RDBHATMBLACK - Black Size S/M
RDBHATLBLACK - Black Size L/XL
RDBHATMRED - Red Size S/M
RDBHATLRED - Red Size L/XL
Back
RDBSNPBCKGRYGrey Heathered Snapback Embroidered Redback Logo Cap• One size fits all Snapback hat• Embroidered name on front left• Embroidered spider on back right• Made by Yapoong - same company as Flexfit• Flat bill construction allows you to shape your bill as desired.
RDBUNPU10Puma Brown Water Resistant Leather Slip on Boot, Size 10• 100% Australian Made• Water resistant treated leather• Oil/ Acid/ Slip Resistant TPU Soles• 2.5-2.7mm Thick premium full grain leathers
RDBUSABK10Black Lace-up 6" Full Grain Leather Steel Toe Boot, Size 10• Built with a tough ASTM Certified 2412-05 Steel Toe to keep safety a #1 priority (OSHA Standards)
RDBUABK10Black Lace-up 6" Full Grain Leather Boot, Size 10• 100% Australian made• Oil / Acid / Slip resistant TPU soles• 2.5-2.7mm thick premium full grain leathers
RDBUSBBK10Black Slip-On Steel Toe Full Grain Leather Boot, Size 10• Built with a tough ASTM Certified 2412-05 Steel Toe to keep safety a #1 priority (OSHA Standards)
RDBUSACH8Brown Lace Up 6" Steel Toe Leather Boot, Size 8• Steel Toe- ASTM / ANZI certified to OSHA Standards
RDBUACH8Brown Lace-Up 6" Leather Boot, Size 8• Premium full grain leather construction• Oil / Acid / Slip resistant TPU oles for sure footing• 100% Australian made
RDBRRBN8Black Nappa Leather RETRO Boot, Size 8• 100% Full Grain H20 Resistant Black Nappa Leather• Oil / Acid / Slip resistant TPU Soles for sure footing on any terrain• Slip on design for easy on and off • 100% Australian made• Anatomic support system for maximum comfort ever step of the way
RDBRBBN8Black Nappa Leather BARMAN Boot, Size 8• 100% Made in Australia• 100% Black Nappa H20 Resistant Leather• Oil / Acid / Slip Resistant TPU soles formaximum traction on any surface
RDBUSOXBF8Black Steel Toe Walkabout Oxford Leather Shoe, Size 8• ASTM Certified Steel Toe Cap
RDBUOXBF8Black Oxford Walkabout Leather Shoe, Size 8• Premium Full grain leather construction• Oil / Acid Slip Resistant TPU Soles• 100% Australian made
RDBMBLT40 Mechanic's Leather Belts - Size 40• 100% Full Grain Leather• Adjustable belt loops• 1-1/2" wide full grain leather Belt• Fully covered brass buckle to prevent the bucklefrom scratching the surface you work on. (Imageshows belt buckle covered and uncovered).
ASK YOUR TOOL DEALER ABOUTADDITIONAL SIZES.*All Redback sizes are UK sizes. American sizes usually run one full boot size larger than UK.For example Redback UK size 10 is a mens size 11 American.
MOBILE EXCLUSIVE PRODUCTFront
RDBUBBK10Black Slip-On Full Grain Leather Boot, Size 10• 100% Australian made• Premium full grain leathers• Oil / Acid / Slip Resistant TPU Soles
Redback Black Hoodie with Zipper Closure• 80% Cotton, 20% Polyester • Full zipper closure for easy on/off• Split Kangaroo Pocket • Drawstring for comfort fit• Features our signature logos screen printed on chest, back, and left arm.
RDBRBHOODL - Large
RDBRBHOODXL - X-Large
RDBRBHOODXXL - XX-Large
Redback Black Twill Jacket by DICKIES• 8 oz lining to keep you warm• Hip Length & Button Cuffs• Slash front pockets and Inside Pocket• Bi-swing back for ease of movement
This Redback Jacket by DICKIES is constructed of poly/cotton blend and a nylon liningthat keeps you warm day in and day out. A hip length Black jacket with Slash frontpockets as well as a Inside Pocket. This jacket also has Bi-swing back which allows foreasy movement and to no feel constricted.
MST10120Rechargeable 122 SMD LED Hand Held Worklight• Super bright 122 SMD LED light technology• 750 lumens• Lasts up to 2.5 hours• Comfortable rubber grip• Offers two convenient hooks for multiple lighting positions• Compact design and lightweight
122 SMD LED
SUPER-STORE
A MOBILE EXCLUSIVE BRAND!
MST97661Monster 9 Piece Tri-Lobe Handle Tamper Proof Torx Set• Tri-lobe handle design allows user to apply high torque with less effort• The handle is a Dual-Durometer construction with TPR over mold providing a comfort grip
• Hexagon bolster on shaft/shank works with wrenches providing more turning power
• Black-Oxide tip finish helps maintain rust prevention• Lifetime Warranty
MST97671Monster 4 Piece Tri-Lobe X-Long Screwdriver Set• Tri-lobe handle design allows user to apply high torque with less effort• The handle is a Dual-Durometer construction with TPR over moldproviding a comfort grip
• Hexagon bolster on shaft/shank works with wrenches providing more turning power
• Black-Oxide tip finish helps maintain rust prevention• Set includes: 1/4 x 18" without hex bolster, 1/4 x 26" without hexbolster, P2 x18" without hex bolster and P2 x 26" without hex bolster
• Lifetime Warranty
MST97676Monster Tri-Lobe Handle 6 Piece File Set• Made of chrome vanadium alloy steel for superior hardness and toughness combined
• Sand blasted finish enhances surface hardness and filing capability• Tri-lobe handle design allows user to apply high torque with less effort• Dual durometer construction with TPR over mold for handle providesadditional comfort grip
• Lifetime Warranty
MST97683Monster 8 Piece Tri-Lobe Handle Hook and Pick Set• Cold drawn chrome-vanadium alloy steel for high strength and durability• Tri-lobe handle design allows user to apply high torque with less effort• High polished chrome plated finish provides superior corrosion resistance• Dual durometer construction with TPR over mold for handle provides additionalcomfort grip
• Set includes: Straight pick, Full hook, 90 hook, small angle hook, X-LongStraight pick, X-Long Full hook, X-Long small angle hook and X-Long 90 hook
• Lifetime Warranty
MST106262 SMD LED Work Light• 400 Lumens max.• Run time 4.5 hours approx.
MST1062 - 62 SMD LED
MST1092 - 92 SMD LED
MST109292 SMD LED Work Light• 600 lumens max.• Run time 3.5 hours approx.
SMD LED Rechargeable Hand Held Work Lights• SMD Light Technology • Comfortable rubber grip• Two convenient hooks offering multiple lighting positions
$54.99 $61.65
$69.99
$61.99
$44.99
$49.99
$94.99
S U P E R S L I M D E S I G N
MST7195-6 1" Mini Impact Wrench with 6" Extended Anvil • Compact High Power Extended Anvil Impact Wrench• Weighs only 14.8 lbs - 40% less than the market leader• Max Torque 1,600 ft-lbs - 10% more than the market leader• Light weight and well balanced• Convenient side handle
A compact 1" extended anvil impact that offers all the power of the much heavier marketleaders. Weighs in at only 14.8 pounds with a whopping 1,600 ft-lbs of maximum torque!Convenient side handle for maximum comfort and balance.
MSTILITE1Rechargeable 24SMD LED Pocket Light• Sleek, sophisticated, and compact design similar to a smartphone• Adjustable, magnetic base allows for multiple working positions• Super bright, adjustable 24SMD LED provides 30-150 Lumen• Recharge anywhere from any powered USB Port• Up to 2.5 hours continous working time
MST3304GLimited Edition Monster Cart with 4 Drawers and Bumpers• 500 lbs capacity• Four 5" x 2" HD swivel casters• Four protective bumpers• Lid Includes two gas struts• Cart Dimensions: Height 39.5”; Length 33.25”; Width 20”; Weight 117 lbs
• Drawer/Shelf Dimensions: Depth Top Bin 5”; Twin Drawer 3.25”; Middle Drawer 4.25”; Bottom Drawer 5”; Bottom Shelf 3”
PROTECTIVECORNERBUMPERS
5 INCHDEEPBOTTOMDRAWER
CORDLESS RECHARGEABLE
ADJUSTABLE
30 - 150LUMENS
MST1011Super Thin LED Rechargeable Worklight• Super slim design with 9 high efficiency LED's• Weighs only 6 oz. and it generates 240Lumen @.5m• Lasts up to 5 five hours on a single charge• Micro USB receiver allows for multiple charging options• 3.7V Li-ion 2200 mah rechargeable battery
This Super Thin LED lamp is a must for mechanics that work on today’s compactvehicles. Top Facing LED allows the light to enter spaces as small as 1/4” tall.
• 1 year warranty on material and workmanship
MICRO USBRECEIVER
COMPACT DESIGN1” DR. IMPACT WRENCH
1,600 FT-LBSMAX TORQUE!
MSTMIG6140140-Amp Professional Portable (115-Volt) MIG Welder• Gas (MIG) and no gas (flux core)capable with 6 step output power
• Package includes TW1 torch 10', work clamp, adjustable gas regulator, mild steel.030 wire, 5-tips and operator manual.
• For warranty information please visit:http://nu-tecsys.com/Monster-Warranty.html
$766.65
$36.99
$366.65
$89.99
$999.00
NEW PRODUCT SUPPLEMENT - SEPTEMBER 2014
This Advertisement was Prepared in Advance, ThereforeMerchandise Availability is Subject to Delivery by Manufacturersas Scheduled. All Advertised Items Are Not Stocked By All Stores.Not Responsible for Typographical or Pictorial Errors.
Always wear appropriate safety equipment and observe safetyadvice and proper use of equipment as instructed in warningand caution labels and operational instructions.
PRICING GOOD SEPTEMBER 1 - 31, 2014
P.O Box 90009
Lakeland, Fl 33804
MLW2668-21CTM18™ Cordless 2-Speed 3/8" Right Angle Impact Wrench• 1.7" Head allows for greater access to complete a wider varietyof applications
• 2-Speed Drive-Control™ offers greater control over applications• 3/8" anvil with friction ring for fast, easy socket changes• Extended paddle switch for multiple grip options• LED Light to illuminate work surfaces
OUR#1UNIT
SOLJNC660Jump-N-Carry 12 Volt Jump Starter • Rugged, durable and reliable 12 Volt jump starting for professional applications
• Delivers 1700 Peak Amps, 425 cranking amps of jump starting power
• Long, 46" #4 gauge heavy duty cables
JSP91929SteelmanPro™ SmartEAR 2• Turns Smart Device into a sound and vibration detection system• Diagnose location of unwanted squeaks, noises, and rattles• Record feature allows for data capturing and the SmartEAR 2 can email test data forfurther review by others
• Sound level reading displays average, peak, and real-time values, also the sound levelreadings are displayed in analog or digital formats
• Download the app for free
HOTITEM
HOTITEM
TIT231533/4" Drive Digital Torque Adapter• Range: from 50-600 ft/lbs• Calibration device for torque wrenches• Converts any ratchet or breaker bar into a torque measuring tool• Swivels 240 degrees• LED backlight• Flip screen (180 degrees)• 10 memory settings• Includes a calibrating block & blow mold case
