NA[ITE PARTNERINA[ITE PARTNERI

OUR PARTNERS2

ZA NASABOUT US: 3

Tehnoinvest e semejna kompanija os­novana vo 1991 godina.Za ovoj period se doka`avme deka sme lider vo segmentot na ponuda na trans­portni lanci vo Makedonija.Sega ~ekorime ponatamu so vos po s­tavuvawe na cvrsti relacii so na{ite novi partneri, so {to do nesuvame nov kvalitet i novi pro izvodi. Zaedno so novite i so na{ite pos to­e~ki partneri, sigurni sme deka } e n# prepoznaete kako najrelevan ten do­bavuva~ za proizvodite i re {e nijata prika`ani vo ovoj ka ta log.

Tehnoinvest is a family owned company founded in 1991.

During this period we have demonstrated that we are a leader in providing conveyor chains in Macedonia.

Now, we are heading forward with esta­blishing strong relations with our new partners, bringing new quality and new products.

Together with our new and existing par t­ners, we are confident that you will identify us as the most relevant pro vider for the products illustrated in this catalog.

INDUSTRISKI SEGMENTI OPFATENI VO OVOJ KATALOG:INDUSTRY AREA COVERED:

INDUSTRISKI TRANSPORTNI LANCICONVEYOR ChAINS

TRANSPORTNI SISTEMICONVEYOR SYSTEmS

OPREMA I USLUGI ZA METALOPRERABOTUVA^KATA INDUSTRIJAEQUIPmENT AND SERVICES FOR mETAL INDUSTRY

SISTEMI ZA OBRABOTKA I TRANSPORT NA @ITO I GRANULARNI PROIZVODISYSTEmS AND SOLUTIONS OF gRAIN AND gRANULAR PRODUCTS ExPLOITATION AND TRANSPORT

ELEMENTI ZA KREVAWE I FIKSIRAWE NA TOVARWEIghT LIFTINg AND FIxINg ELEmENTS

LANCIChAINS

^ELI^NI JA@IWASTEEL ROPES

MAGACINI I RE[ENIJA ZA SKLADIRAWEWAREhOUSINg AND STORAgE SOLUTIONS

FILTRIRAWE NA GASOVI PRI PROIZVODNI PROCESIINDUSTRIAL WASTE gASSES FILTERINg

LANCI ZA ZA[TITA I PODOBRUVAWE NA TRAKCIJATRACTION AND PROTECTION ChAINS

INOx OPREMA ZA PROIZVODSTVO NA VINOINOx WINEmAkEINg EQUIPmENT

NA[ITE PARTNERIINDUSTRISKI TRANSPORTNI LANCI

CONVEYOR ChAINS4

Lanec br: ^ekor Vnatre{na {irina

[irina na vnatre{na

spojka

Pre~nik na val~e

Pre~nik na osovina

[irina na lamela Maksimalna {irina na lanecot

Debelina na lamela vna-tre/nadvor

Sila na kinewe Masa

Chain No:Pitch Between in­

ner platesInner link

trackRoller

diametar Pin diametar Plate track Chain trackThickness plate inner/

outer

Breaking load Weight

tb1min

[mm]

b2max

[mm]

d1max

[mm]

d2

[mm]

g max

[mm]

a1max [mm]s max

[mm]Fmin [kN] g [kg/m]

MS FKK ISO mm inch/zoll

ednoreden simplex

dvoreden duplex

troreden triplex

145* 06 B 9,525 3/8 5,72 8,53 6,35 3,31 8,5 13,5 23,8 34 1,3/1,3 9 0,41

160 081 12,7 1/2 3,3 5,8 7,75 3,59 9,9 10,2 / / 1/1 8,2 0,28

165 082 12,7 1/2 2,38 4,6 7,75 3,59 9,9 8,6 / / 1/1 10 0,26

176 083 12,7 1/2 4,88 7,9 7,75 4,09 10,3 12,9 / / 1,95/1,6 12 0,42

167 084 12,7 1/2 4,88 8,8 7,75 4,09 11,1 14,8 / / 1,95/1,6 16 0,59

190 08 B­1 12,7 1/2 7,75 11,3 8,51 4,45 12 17 31 44,9 1,6/1,6 18 0,7

220** 10 B­1 15,88 5/8 9,65 13,28 10,16 5,08 14,7 19,6 36,2 52,8 1,6/1,6 22,4 0,95

240** 12 B­1 19,05 3/4 11,68 16,52 12,07 5,72 16,2 22,7 42,2 61,7 1,8/1,8 29 1,25

310** 16 B­1 25,4 1 17,02 25,4 15,88 8,28 21 36,1 68 99,9 4/3 60 2,7

350** 20 B­1 31,75 1 1/4” 19,56 29 19,05 10,19 26,4 49,3 85,1 122,1 4.4 / 4 95 3,6

380** 24 B­1 38,1 1 1/2” 25,4 37,9 25,4 14,63 33,4 60 107,6 156,6 6 / 5 160 6,7

430 28 B­1 44,45 1 3/4” 30,99 46,58 27,94 15,9 37 72,5 131,4 191,4 7 / 6 200 8,3

510** 32 B­1 50,8 2” 30,99 45,57 29,21 17,81 42,2 75,3 133,9 191,9 7 / 6 250 10,5

610 40 B­1 63,5 2 1/2” 38,1 55,7 39,37 22,89 52,9 92,6 164 237 8.5 / 7.5 355 16

710 48 B­1 76,2 3” 45,72 70,5 48,26 29,24 63,8 109,1 200 291 12 / 10 560 25

810 56 B­1 88,9 3 1/2” 53,34 81,3 53,98 34,32 77,8 125 232 341 13 / 12 850 35

* ­ samo so ramni lameli | straight plates only ** ­ i so ramni lameli | also with straight plates

Partneri /Partners: metal Sistemi | Filip kljajjc | CZ | Vamberk | Tsubaki

NA[ITE PARTNERIINDUSTRISKI TRANSPORTNI LANCI

CONVEYOR ChAINS 5

Tehnoinvest e dobavuva~ so najdolga tradicija vo Makedonija na transportni i specijalni lanci.

Na{iot magacin vo Skopje raspolaga so zaliha od standardni lanci, kako i od najbaranite specijalni izvedbi, a mo`eme da ga­rantirame i najbrza isporaka na site va{i barawa.

Spremni sme da odgovorime na site va{i specifi~ni potrebi za transportni lanci:

standardni izvedbi spored EU/USA standard ylanci za specijalni nameni yizrabotka na specijalni lanci spored crte`/primerok yspecijalni izvedbi na standardnite lanci (za ekstremni us­ ylovi temperaturi, vla`ni / abrazivni sredini, bez potreba za podma~kuvawe...)

Tehnoinvest is conveyor chains provider with greatest tradition in Macedonia.

Our warehouse in Skopje has on stock all types of standard chains, plus most required special chains, and we can guarantee quick delivery for all of your special requests.

We are able to answer all of your conveyor chains specific needs:standard chains EU/USA standard•special purposes’ chains•manufacturing according drawing/sample•special versions of standard chains (intended for use in extreme tempera­•tures, moist / abrasive conditions, without need for lubrication..)

Te`ok transporten lanec

Standarden troreden lanecRedler - transport na `ito

Heavy conveyor chain

Standard triplex chain Redler ­ grain transport

Partneri /Partners: metal Sistemi | Filip kljajjc | CZ | Vamberk | Tsubaki

TRANSPORTNI SISTEMICONVEYOR SYSTEmS

PROCESNA OPREMAPROCESSINg EQUIPmENT6

Spremni sme da vi ponudime dizajn i implementacija na re{enija za kontinuiran transport, spored specifi~nite barawa na proizvodniot proces vo:

Industrijata yProizvodstvoto na hrana i pijaloci yRudnici yVnatre{en transport za magacini” y

We can offer design and implementation of all types of con­veyor solutions, according your processes’ specific needs, intended for use in:

Industry yFood / beverages production yMining sector yInternal transport y

Partneri /Partners: metal Sistemi | milinostroj

Nudime:

Proektirawe i izrabotka na ~eli~ni konstrukcii, yoprema za povr{inska za{tita, za termoelektrani, rudarstvo.Uslugi na se~ewe i vitkawe na limovi, ma{inska yobrabotka, peskarawe i mokro farbawe, lasersko se~ewe na metali.”

We offer:

Design and production of steel constructions, surface protec­ ytion equipment, thermal powerplants, mining.Steel plates cutting and forming services, machining, sanding yand wet­painting, laser cutting.

Re{enie za industriski procesi Industrial process solution

TRANSPORTNI SISTEMICONVEYOR SYSTEmS 7

Partneri /Partners: metal Sistemi | milinostroj

Kontinuiran vertikalen transport na paleti - Lift veyor Pol`avest transporter

Teleskopski transporter Re{enie za transport na `ito

Re{enie za industriski procesi Vertical conveyor for pallets ­ Lift veyor Spiral conveyor

Telescop conveyor Grain transport solution

SISTEMI ZA OBRABOTKA I TRANSPORT NA @ITO I GRANULARNI PROIZVODISYSTEmS AND SOLUTIONS OF gRAIN AND gRANULAR PRODUCTS ExPLOITATION AND TRANSPORT 8

Vo sorabotka so na{ite partneri, nudime re{enija za in­dustriite za obrabotka na `ito, sto~na hrana, bra {no, proizvodstvo na suvi malteri i sli~no, kako:

Kontinuiran transport ­ site izvedbi na meha ni ~ ki i ypneumatski re{enijaOpremi za silosi, su{ari yOtpra{uvawe yOpremi za fabriki za sto~na hrana ­ me{alki, mela­ ysirki, mlinovi, ..^istewe i delewe ­ sita, aspiratori, cevni magne ti..” y

Together with our partners, we can provide solutions for industries for exploitation of grain products, livestock foodstuff , production of dry malter etc, such a:

Conveying solutions ­ all types of mechanical and ypneumatic implementationEquipment for Silos, dryers yOtpra{uvawe yLivestock foodstuff factories equipment ­ mixers, as­ ypiratori, cevni magneti..

Partneri /Partners: milinostroj

SISTEMI ZA OBRABOTKA I TRANSPORT NA @ITO I GRANULARNI PROIZVODISYSTEmS AND SOLUTIONS OF gRAIN AND gRANULAR PRODUCTS ExPLOITATION AND TRANSPORT 9

Partneri /Partners: milinostroj

10ELEMENTI ZA KREVAWE I FIKSIRAWE NA TOVAR”

WEIghT LIFTINg AND FIxINg ELEmENTS10

Partneri /Partners: marmet

ELEMENTI ZA KREVAWE I FIKSIRAWE NA TOVARWEIghT LIFTINg AND FIxINg ELEmENTS 11

Nudime integracija na elementi za krevawe i fiksirawe na seka­kov tovar od vrvni proizvoditeli i proizvodstvo na gotovi siste­mi spored specifi~ni barawa na klientot.

Kombinirani so sopstvenoto proizvodstvo, na{ite re{enija se primenlivi vo:

Industrija yGrade`ni{tvo yTransport yOd mali/sredni do najgolemi proizvodni pogoni ySo dijapazon na nosivost od najmali do pove}e od 50 toni y

Site re{enija se na raspolagawe vo izvedbi so lanci, ~eli~ni ja`iwa i tekstilni / poli esterski kai{i.

We are offering integration of weight lifting and weight fixing elements from top EU manufacturers, as well as production of complete systems according client’s specific requests.

Combined with our in­house production, our solutions are intended for implementation in:

General industry yCivil engeneering yTransport ySmall/mid­sized to biggest production facilities yRange of weight limits from smallest up to more than 50 tons y

Our products can be implemented with chains, steel ropes and textile / polyester belts.

Partneri /Partners: marmet

MAGACINI I RE[ENIJA ZA SKLADIRAWEWAREhOUSINg AND STORAgE SOLUTIONS12

Partneri /Partners: metal Sistemi

MAGACINI I RE[ENIJA ZA SKLADIRAWEWAREhOUSINg AND STORAgE SOLUTIONS 13

Nudime konsalting, proektirawe i izvedba na magacinski i pro­da` ni prostori;

Izrabotkata od modularni elementi gi pravi na{ite re{enija le sno prilagodlivi za sekoja namena spored konkretnite ba­rawa za:

Optovaruvawe yNa~in na pristap yVid na roba (Zadovoluva kriteriumi na y HACCP)

Primena voIndustrija yDistributivni centri yProizvodstvo i skladirawe na prehranbeni proizvodi yFarmacija y

Na{ata prednost e vo mo`nosta na izrabotka na samonose~ki ma ­ga cini, pri {to modularnite elementi na regalite se i no se ~ka kon strukcija na samiot magacin. Ovie re{enija nudat naj efekt­i vno iskoristuvawe na korisniot prostor, a pred s# ­ naj brzo i naj eftino gradewe i opremuvawe na va{iot maga cinski prostor.

We offer consulting, design and implementation of warehouse and shop­fitting solutions.

Modular elements implementation makes our solutions easy adapt­able for any purpose according client’s requests for:

Weight utilization yManner of access yType of goods (meets HACCP criteria) y

Our solutions can be easily implemented in:General industry yDistributive centers yProduction and warehousing of food products yPharmacy y

Our point of strength is in the possibility to develop self­supporting warehouses, so the modular rack elements are building core of the warehouse itself. This type of solution offer most effective utilization of the usable space, ab above all ­ quickest and cheapest construc­tion of your warehouse.

Partneri /Partners: metal Sistemi

FILTRIRAWE NA GASOVI PRI PROIZVODNI PROCESIINDUSTRIAL WASTE gASSES FILTERINg 14

Dolgogodi{noto iskustvo na na{ite partneri i obemnata lista na instalirani proekti garantira efikasno otstranuvawe na zagadeniot vozduh proizvedeni pri proizvodniot proces.

Otstranuvaweto se vr{i lokalizirano od samiot izvor, so fiksna/podvi`na hauba ili direktno od rabotnata povr{ina, povrzana direktno na filtrira~kata stanica ili na centraliz­iran sistem za filtracija.

Over 25 years experience and extensive list of implementation of proj­ects installed guarantees effective air removal and filtering polluted during the industrial processes.

Removal is performed localized from the source, using fixed / mobile hood or directly from the operating surface, connected to the filtering station or to the centralized filtration system.

Partneri /Partners: New Air

FILTRIRAWE NA GASOVI PRI PROIZVODNI PROCESIINDUSTRIAL WASTE gASSES FILTERINg 15

Partneri /Partners: New Air

Rabotna masa so sistem za aspiracija

Zglobna hauba

Working bench with integrated aspiration

Flexible arm­hood

Garantirame efikasno otstranuvawe na:

Pra{ina y pri strugawe, polirawe, se ~e we, bojadisuvawe, obrabotka na drvo, kako i bra{no, cement..^ad y pri zavaruvawe, termi~ko se~eweMaslena magla y od ladewe so maslo/emulzija pri ma{inska obrabotka na metali

We can guarantee efficient polluted air re­moval, such as:

Dust caused by grinding, thermal cut ­ yting, turning, automotive, paintingSmoke from welding, thermal cutting yOil mist from cooling with oil / emul­ ysion during metals treatment

MA[INA ZA SE^EWE NA LIMOVI SO CNC PLAZMACNC PLASmA CUTTINg mAChINE16

ModelModel type

Dimenzii na se~eweOperating surface dimensions

[mm]

GeneratorPower generator

[A]

Filter / Kolektor na pra{inaFilter / Dust collector

TP1020 1000x2000 604KW

2500/3000 m3/hTP1530 1500x3000 80

TP2040 2000x4000 100

CNC plazma ma{inata ovozmo`uva evtino, brzo i precizno se~ewe na limovi so debelina do 25mm.

Ekstremno ednostavniot softver ovozmo`uva brzo optimizirawe na rabotata so minimizirawe na otpadniot materijal. Modular­nata i robusna rabotna povr{ina e lesno dostapna i prila­godena za brzo ~istewe na otpadniot materijal.

Otpadnite gasovi i ~ad lokalizirano se v{mukuvaat, vo zavis­nost od pozicijata na fakelot, i vo kombinacija so kompakt­niot filter/kolektor ovozmo`uvaat tivka rabota (<72dB(A)). Otpadniot prav se skladira vo kontejner od 120l, {to ja na­maluva potrebata za ~esto praznewe.

Filtriraniot vozduh so upotreba na ednostaven post­filter mo`e da se reciklira i da ostane vo rabotnata prostorija ili da se otstrani niz oxak.

CNC plasma cutting machine provides cheap, quick and precise cut­ting of plates up to 25mm thick.

Extremely easy­to­use software allows quick optimizing of waste materials from cutting. Modular and robust operating surface is easy accessible, allowing quick emptying operations.

Waste gasses and smoke are removed using localized suction de­pending of torch position, and combined with compact size filter/collector allows silent operation (<72dB(A)). Waste powders are stored in 120l container, which reduces the need of frequent empty­ing operations.

The filtered air can be easily recycled through a post­filter or put outside through a stack.

Partneri /Partners: New Air

LANCI ZA ZA[TITA I PODOBRUVAWE NA TRAKCIJATRACTION AND PROTECTION ChAINS 17

Konstantnoto izlo`uvawe na intenzivni nadvore{ni vlijanija, drasti~no go namaluva `ivotniot vek na gumite na specijalnite vozila.

So upotreba na ovoj vid na za{tita, pove}ekratno se zgolemuva vekot na upotreba na skapite gumi, nezavisno dali se raboti za kamenolom, povr{inski/podzemen kop, manipulacija so otpad/metal, sneg ili pri ekstremno visoki temperaturi.

RUD Erlau lancite pokrivaat 65% od svetskite potrebi za va­kov vid na za{tita!

Constant exposure to rough conditions drastically reduces special vehicles’ lifespan.

By using this kind of protection, the expected duration of such expen­sive tires is multiplied when used in queries, open­pit or underground mining, scrap/metal manipulation, in snow or for use in extremely high temperatures.

RUD Erlay TPC chains cover more than 65% of such demand in whole world!

Partneri /Partners: RUD Erlau

INOx OPREMA ZA PROIZVODSTVO NA VINOINOx WINEmAkEINg EQUIPmENT18

SK Grupacija e kompanija so pove}e od 40 godini tradicija.

Glaven fokus e staven na razvoj, proektirawe i proizvodstvo na oprema od INOX za proizveduvawe na vino i srodni pijaloci, kako i implementacii vo industrijata za proizvodstvo na hrana.

Proizvodnata programa od vinarskata industrija opfa}a:Tankovi za skladirawe na vino/pijaloci yFermentatori yPneumatski presi yKontrola i monitoring na temperatura y

SK group is a company with more than 40 years of tradition.

Main focus is put on development, design and construction of INOX equipment for winemaking, and beverages in general, as well as imple­mentations in food production industry.

Winemaking equipment (selection):Wine / beverages storage tanks yFermenters yPneumatic presses yTemperature monitoring and controlling equipment y

Rezervoar za vinoWine tanks

Kontrola na temperaturaTemperature control

Sistem na rezervoari

System of tanks

Potopen fermentatorPunch­down fermenter

Sistem na fermentatoriSystem of fermenters

Pneumatski presi Pneumatic presses

Partneri /Partners: Sk group

INOx OPREMA ZA PROIZVODSTVO NA VINO I PIJALOCIINOx WINEmAkEINg EQUIPmENT 19

Partneri /Partners: Sk group

Pokraj prehrana/pijaloci, ponudata sodr`i golem broj na in-dustriski re{enija, osobeno za potrebite na farmacevtskata industrija.

Besides the food/beverages implementations, the offer consists vast number of industry solutions, especially for the needs of pharmaceutics industry.

tel: +389 2 311 2064 | fax: +389 2 322 4032Naroden Front 19a/1/25a, 1000 Skopje, Macedoniacontact@tehnoinvest.mk | www.tehnoinvest.mk

Skopje

design: Brigada DSGNTi logo: Nikola Vojnov