Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

1

Unique operating mechanism for accurate load calibration.

Interchangeable idle end

Diverse coil option for superior lift

Chain with adjustable chain stopper for safe and precise positioning

SunProject Shading System Feature Lite-Lift® a smooth state of the art easy lift activated mechanism.

• Lite-Lift® provides a smooth constant effortless lift of medium to large shades with finger tip control.

• Lite-Lift® mechanism effortless lift alleviates stress on the chain and avoids chain breakage (Major cause of maintenance associated with chain operated shades).

• Shade can be pulled down by the bottom bar (without stripping or damaging the mechanism) without having to pull from the chain.

• Shade mechanism cannot be stripped or damaged!

• Virtually lasts forever. Durable — Heavy use design, important in commercial applications where products are in some cases abused.

Lite-Lift® Operating System

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

2

Tekno® Lite-Lift®

Open Roll TR

With Shade Holder

Tekno® Lite-Lift®

With Cassette 70

Tekno® Lite-Lift®

With Cassette 95/125

Lite-Lift® Chain Operated Roller Systems

TM

5

TEKNO® LITE-LIFT®

TEKNO®

LITE-LIFT®

OPEN ROLL TRWITH SHADE HOLDER

TEKNO®

LITE-LIFT®

WITH CASSETTE 70

TEKNO®

LITE-LIFT®

WITH CASSETTE 95/125

CHAIN OPERATED ROLLER SYSTEMS

TM

5

TEKNO® LITE-LIFT®

TEKNO®

LITE-LIFT®

OPEN ROLL TRWITH SHADE HOLDER

TEKNO®

LITE-LIFT®

WITH CASSETTE 70

TEKNO®

LITE-LIFT®

WITH CASSETTE 95/125

CHAIN OPERATED ROLLER SYSTEMS

TM

5

TEKNO® LITE-LIFT®

TEKNO®

LITE-LIFT®

OPEN ROLL TRWITH SHADE HOLDER

TEKNO®

LITE-LIFT®

WITH CASSETTE 70

TEKNO®

LITE-LIFT®

WITH CASSETTE 95/125

CHAIN OPERATED ROLLER SYSTEMS

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

3

Tekno® Lite-Lift®

With Cassette 70

and Channels T-440

Tekno® Lite-Lift®

With Cassette 95

and Channels T-460

Tekno® Lite-Lift®

With Cassette 125

and Channels T-460/T-480

Lite-Lift® Chain Operated Roller Systems

TM

6

TEKNO® LITE-LIFT®

TEKNO®

LITE-LIFT®

WITH CASSETTE 70AND CHANNELS T-440

TEKNO®

LITE-LIFT®

WITH CASSETTE 95AND CHANNELS T-460

TEKNO®

LITE-LIFT®

WITH CASSETTE 125AND CHANNELS T-460/T-480

CHAIN OPERATED ROLLER SYSTEMS

TM

6

TEKNO® LITE-LIFT®

TEKNO®

LITE-LIFT®

WITH CASSETTE 70AND CHANNELS T-440

TEKNO®

LITE-LIFT®

WITH CASSETTE 95AND CHANNELS T-460

TEKNO®

LITE-LIFT®

WITH CASSETTE 125AND CHANNELS T-460/T-480

CHAIN OPERATED ROLLER SYSTEMS

TM

6

TEKNO® LITE-LIFT®

TEKNO®

LITE-LIFT®

WITH CASSETTE 70AND CHANNELS T-440

TEKNO®

LITE-LIFT®

WITH CASSETTE 95AND CHANNELS T-460

TEKNO®

LITE-LIFT®

WITH CASSETTE 125AND CHANNELS T-460/T-480

CHAIN OPERATED ROLLER SYSTEMS

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

4

Tekno® Lite-Lift® Tandem

Open Roll TR

Shade Holder — Not Available

Tekno® Lite-Lift® Tandem

With Cassette 95/125

Tekno® Lite-Lift® Tandem

With Cassette 95/125

and Channels T-460

Lite-Lift® Tandem Chain Operated Roller Systems

TM

7

TEKNO® LITE-LIFT® TANDEM

TEKNO®

LITE-LIFT®, TANDEMOPEN ROLL TRSHADE HOLDER - NOT AVAILABLE

TEKNO®

LITE-LIFT®, TANDEMWITH CASSETTE 95/125

TEKNO®

LITE-LIFT®, TANDEMWITH CASSETTE 95/125AND CHANNELS T-460

CHAIN OPERATED ROLLER SYSTEMS

TM

7

TEKNO® LITE-LIFT® TANDEM

TEKNO®

LITE-LIFT®, TANDEMOPEN ROLL TRSHADE HOLDER - NOT AVAILABLE

TEKNO®

LITE-LIFT®, TANDEMWITH CASSETTE 95/125

TEKNO®

LITE-LIFT®, TANDEMWITH CASSETTE 95/125AND CHANNELS T-460

CHAIN OPERATED ROLLER SYSTEMS

TM

7

TEKNO® LITE-LIFT® TANDEM

TEKNO®

LITE-LIFT®, TANDEMOPEN ROLL TRSHADE HOLDER - NOT AVAILABLE

TEKNO®

LITE-LIFT®, TANDEMWITH CASSETTE 95/125

TEKNO®

LITE-LIFT®, TANDEMWITH CASSETTE 95/125AND CHANNELS T-460

CHAIN OPERATED ROLLER SYSTEMS

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

5

Bracket and Cassette Details

Side Channel Type

T-440

T-460

T-480

T-3

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

6

Lite-Lift® Tandem

Chain Operated Roller System

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

7

Elektra offers the following motorized options for the Tekno® Roller Systems: Open Roll HP, Cassette 95 and 125.

• Elektra 24V/DC is low voltage motorized roller system.

— Cost effective, can be easily interfaced with any centralized home automation system and sleek for small to medium sized windows

— Available in remote control, individual and group controls, and an array of decorative switches

• Elektra 120V/AC is a line voltage motorized roller system for medium to large windows in available options:

— 120V/AC features our easy “Quick Connect” plugs allow for easy pre-wiring by electrician. Available in remote control, individual and group controls, and an array of decorative switches

— 120V/AC RTS plug-in unit comes with an AC Plug and can be plugged into any wall outlet

• Eliminates problems of integration and installation specific to the wiring

• Comprehensive range of radio control using remote controls switches, timers and integration controls are available

Elektra Motorized Options

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

8

Tekno® Elektra

24V/DC

Open Roll TR

With Shade Holder

Tekno® Elektra

24V/DC

With Cassette 95

Tekno® Elektra

24V/DC

With Cassette 95

and Channels T-460

Elektra 24V/DC

24V/DC Motor Operated Roller Systems

TM

11

TEKNO® ELEKTRA 24V/DC

24V/DC MOTOR OPERATED ROLLER SYSTEMS

TEKNO®

ELEKTRA, 24V/DCOPEN ROLL TRWITH SHADE HOLDER

TEKNO®

ELEKTRA, 24V/DCWITH CASSETTE 95

TEKNO®

ELEKTRA, 24V/DCWITH CASSETTE 95AND CHANNELS T-460

TM

11

TEKNO® ELEKTRA 24V/DC

24V/DC MOTOR OPERATED ROLLER SYSTEMS

TEKNO®

ELEKTRA, 24V/DCOPEN ROLL TRWITH SHADE HOLDER

TEKNO®

ELEKTRA, 24V/DCWITH CASSETTE 95

TEKNO®

ELEKTRA, 24V/DCWITH CASSETTE 95AND CHANNELS T-460

TM

11

TEKNO® ELEKTRA 24V/DC

24V/DC MOTOR OPERATED ROLLER SYSTEMS

TEKNO®

ELEKTRA, 24V/DCOPEN ROLL TRWITH SHADE HOLDER

TEKNO®

ELEKTRA, 24V/DCWITH CASSETTE 95

TEKNO®

ELEKTRA, 24V/DCWITH CASSETTE 95AND CHANNELS T-460

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

9

Tekno® Elektra

120V/AC

Open Roll TR

With Shade Holder

— 400, 500

— 500 RTS

Tekno® Elektra

120V/AC

With Cassette 95/125

— 400, 500

— 500 RTS

Tekno® Elektra

120V/AC

With Cassette 95/125

and Channels T-460

— 400, 500

— 500 RTS

Elektra 120V/AC

120V/AC Motor Operated Roller Systems

TM

12

TEKNO® ELEKTRA 120V/AC

TEKNO®

ELEKTRA, 120V/ACOPEN ROLL HPWITH SHADE HOLDER

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMS

TM

12

TEKNO® ELEKTRA 120V/AC

TEKNO®

ELEKTRA, 120V/ACOPEN ROLL HPWITH SHADE HOLDER

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMS

TM

12

TEKNO® ELEKTRA 120V/AC

TEKNO®

ELEKTRA, 120V/ACOPEN ROLL HPWITH SHADE HOLDER

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMS

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

10

Tekno® Elektra Tandem

120V/AC

Open Roll TR

With Shade Holder – Not Available

— 400, 500

— 500 RTS

Tekno® Elektra Tandem

120V/AC

With Cassette 95/125

— 400, 500

— 500 RTS

Tekno® Elektra Tandem

120V/AC

With Cassette 95/125

and Channels T-460

— 400, 500

— 500 RTS

Elektra Tandem 120V/AC

120V/AC Motor Operated Roller Systems

TM

13

TEKNO® ELEKTRA TANDEM - 120V/AC

TEKNO®

ELEKTRA, TANDEM - 120V/ACOPEN ROLL TRSHADE HOLDER - NOT AVAILABLE

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMS

TM

13

TEKNO® ELEKTRA TANDEM - 120V/AC

TEKNO®

ELEKTRA, TANDEM - 120V/ACOPEN ROLL TRSHADE HOLDER - NOT AVAILABLE

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMS

TM

13

TEKNO® ELEKTRA TANDEM - 120V/AC

TEKNO®

ELEKTRA, TANDEM - 120V/ACOPEN ROLL TRSHADE HOLDER - NOT AVAILABLE

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMS

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

11

Tekno® Elektra

120V/AC

With Cassete 95/125

and Channels type 2

— 400, 500

— 500 RTS

Tekno® Elektra

120V/AC

With Cassete 95/125

and Channels type 3

— 400, 500

— 500 RTS

Tekno® Elektra

120V/AC

With Cassette 95/125

and Channels Type 4 T-460

— 400, 500

— 500 RTS

Elektra 120V/AC

120V/AC Motor Operated Roller Systems

TM

14

TEKNO® ELEKTRA 120V/AC

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 2

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 3

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 4 T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

TM

14

TEKNO® ELEKTRA 120V/AC

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 2

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 3

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 4 T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

TM

14

TEKNO® ELEKTRA 120V/AC

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 2

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 3

-400, 500-500 RTS

TEKNO®

ELEKTRA, 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 4 T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

12

Tekno® Elektra Tandem

120V/AC

With Cassete 95/125

and Channels type 2

— 400, 500

— 500 RTS

Tekno® Elektra Tandem

120V/AC

With Cassete 95/125

and Channels type 3

— 400, 500

— 500 RTS

Tekno® Elektra Tandem

120V/AC

With Cassette 95/125

and Channels Type 4 T-460

— 400, 500

— 500 RTS

Elektra Tandem 120V/AC

120V/AC Motor Operated Roller Systems

TM

15

TEKNO® ELEKTRA TANDEM - 120V/AC

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 2

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 3

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 4 T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

TM

15

TEKNO® ELEKTRA TANDEM - 120V/AC

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 2

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 3

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 4 T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

TM

15

TEKNO® ELEKTRA TANDEM - 120V/AC

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 2

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 3

-400, 500-500 RTS

TEKNO®

ELEKTRA, TANDEM - 120V/ACWITH CASSETTE 95/125AND CHANNELS TYPE 4 T-460

-400, 500-500 RTS

120V/AC MOTOR OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

13

Manually crank operated roller shading systems are an alternative Lift system for large shades or in out of reach or irregular areas that typically require a motorized system.

A precision gear box drive with a 1:3 ratio offers an easy and controlled lift allowing for constant and steady rolling of the system.

A variable predetermined height 13 mm (1/2”) diameter Control Shaft connected to a universal joint supports angled and irregular position of shades allowing for effective operation of the shade system.

A Detachable Control Shaft option is available for removal and storage of the Control Shaft. This prevents unauthorized use of the shade system and eliminates hazards common for physically challenged patients or simply for improved visual appearance typically with hanging chains.

A Collapsible Folding Handle allows for improved Ratio Lift of the shade system reducing strain and effort to the user.

Internal Limit Stop mechanism allows for consistent down position stop of the shade system and prevents opposite re-winding of the fabric roller assembly preventing damageto the fabric assembly.

Crank

Crank Operated Roller Systems

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

14

Tekno® Crank

Open roll TR

With Shade Holder

Tekno® Crank

with Cassette 125

Tekno® Crank

with Cassette 125

and Channels T-460

Crank

Crank Operated Roller Systems

TM

17

TEKNO® CRANK

TEKNO®

CRANKOPEN ROLL TRWITH SHADE HOLDER

TEKNO®

CRANKWITH CASSETTE 125

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS T-460

CRANK OPERATED ROLLER SYSTEMS

TM

17

TEKNO® CRANK

TEKNO®

CRANKOPEN ROLL TRWITH SHADE HOLDER

TEKNO®

CRANKWITH CASSETTE 125

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS T-460

CRANK OPERATED ROLLER SYSTEMS

TM

17

TEKNO® CRANK

TEKNO®

CRANKOPEN ROLL TRWITH SHADE HOLDER

TEKNO®

CRANKWITH CASSETTE 125

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS T-460

CRANK OPERATED ROLLER SYSTEMS

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

15

Tekno® Crank

with Cassette 125

and Channels Type 2

Tekno® Crank

with Cassette 125

and Channels Type 3

Tekno® Crank

with Cassette 125

and Channels Type 4 T-460

Crank

Crank Operated Roller Systems — Channel Options

TM

18

TEKNO® CRANK

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS TYPE 2

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS TYPE 3

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS TYPE 4 T-460

CRANK OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

TM

18

TEKNO® CRANK

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS TYPE 2

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS TYPE 3

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS TYPE 4 T-460

CRANK OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

TM

18

TEKNO® CRANK

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS TYPE 2

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS TYPE 3

TEKNO®

CRANKWITH CASSETTE 125AND CHANNELS TYPE 4 T-460

CRANK OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

Tekno

This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.

16

Tekno® Crank Tandem

with Cassette 125

and Channels Type 2

Tekno® Crank Tandem

with Cassette 125

and Channels Type 3

Tekno® Crank Tandem

with Cassette 125

and Channels Type 4 T-460

Crank Tandem

Crank Operated Roller Systems — Channel Options

TM

19

TEKNO® CRANK TANDEM

TEKNO®

CRANK TANDEMWITH CASSETTE 125AND CHANNELS TYPE 2

TEKNO®

CRANK TANDEMWITH CASSETTE 125AND CHANNELS TYPE 3

TEKNO®

CRANK TANDEMWITH CASSETTE 125AND CHANNELS TYPE 4 T-460

CRANK OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

TM

19

TEKNO® CRANK TANDEM

TEKNO®

CRANK TANDEMWITH CASSETTE 125AND CHANNELS TYPE 2

TEKNO®

CRANK TANDEMWITH CASSETTE 125AND CHANNELS TYPE 3

TEKNO®

CRANK TANDEMWITH CASSETTE 125AND CHANNELS TYPE 4 T-460

CRANK OPERATED ROLLER SYSTEMSCHANNEL OPTIONS

TM

19

TEKNO® CRANK TANDEM

TEKNO®

CRANK TANDEMWITH CASSETTE 125AND CHANNELS TYPE 2

TEKNO®

CRANK TANDEMWITH CASSETTE 125AND CHANNELS TYPE 3

TEKNO®

CRANK TANDEMWITH CASSETTE 125AND CHANNELS TYPE 4 T-460

CRANK OPERATED ROLLER SYSTEMSCHANNEL OPTIONS