www.shoptanner.comTel: 800 456-2658 Fax: 888 434-3215
Minimize Cost Per Installed Kilowatt For rack system assembly & installation
Unistrut framing channel is well suited for framing photovoltaic solar panels because the material can be used to create an infinite number of dimensional lengths without the need to cut or fabricate the channel. Making a longer or shorter framing section is simple as removing the fastener with hand tools, sliding the channel to the appropriate length, and then re-securing the fastener to hold the panel in place. Because PV panels do not typically come in standard dimensions, Unistrut channel is the framing material of choice for many companies engaged in the fabrication and installation of solar panels.
UniPier™ Rooftop Pipe Support SystemThe UniPier Rooftop support system provides a simple and versatile way to support and manage channel, pipe, tubing, conduit, HVAC systems, and the like. The UniPier system supports without roof surface penetration and allows the parts to remain off the surface. • Deck base is 8” x 8” with a height of 3” • Coupler housing excepts 3/8”-16 all-thread • Structural housing accepts max 1-5/8” x 1-5/8” channel • Polycarbonate plastic (UV Resistant)
1-5/8” Channel • Standard lengths are 10 and 20 feet • Special cut lengths available • Available in Hot Dip Galvanized, Perma Green and Pre-Galvanized finishes
UNISTRUT® SOLAR INSTALLATION PRODUCTSGeneral Fittings
Flat Plate
Angle
“Z” and “U” Shape
Wing Shape
Post Bases
Adjustable Hinge Connections
Seismic Retrofit
Channel Nuts • Electro-galvanized finish • Available in stainless steel • With and without springs
Telestrut® Telescoping TubingBy joining infinitely-adjustable three-sided channel with incrementally adjustable, pre-punched four-sided tubing, the Telestrut system can be telescoped, spliced, adjusted and re-used faster and easier than anything in its class. So you can design, build and change support structures faster...and better...than you ever thought possible. Efficient assembly with no welding, drilling or other time-consuming fabrication, plus five different fastening options...including a rivet system for super-fast boltless fastening... gives you maximum project power. Other fasteners include the Unistrut spring nut and bolt, standard through-bolts and for temporary connections, a removable, self-locking gravity pin.
Accessories
Gravity Pin
Slot Adapter
Missing Link Fastener
Hex Head Cap Screw
Hex Nuts
Lock Washer
www.shoptanner.comTel: 800 456-2658 Fax: 888 434-3215
Minimize Cost Per Installed Kilowatt
For rack system assembly & installation
Lower-Hardness (HRC 28-34) loadbearing section provides ducility
Higher-Hardness (HRC 28-52) drill point and lead threads for
reliable drilling
Tanner offers self-drilling screws, designed specifically for the type of work performed in PV installations. High strength, corrosion resistance and long service life.The Right Type of Fastener Can Make the Difference Between Success and Failure!
Bi-Flex™ Stainless Steel Bi-Metal Self-Drilling ScrewsThe Fastener of Choice For Exteriors & Other Aggressive Environments • Head and Shank --- 300 Series Stainless • Tapping Thread and Drill Point --- Forged and Hardened Steel • Finish --- Stalgard® GB(Galvanic Barrier) Coating • Made In The USA
Dril-Flex® High Performance Structural Drill ScrewsImmune to Hydrogen Assisted Stress Corrosion Cracking (HASCC) • FlexTechnology® Dual-Hardening Process --- provides high strength and resistance to hydrogen embrittlement failures • Finish --- Stalgard® coating provides 1000 hrs. of salt spray resistance • Made In The USA
Alumi-Flex® 302 (18-8) Stainless Steel Drill ScrewsFor Fastening to Aluminum When Corrosion is a Primary Concern • Provides Strength and Corrosion Resistance • Finish --- Stalgard® GB(Galvanic Barrier) Coating • Made In The USA
Flo-Seal® Drill Screws with Integral Sealing WashersFor self-drilling applications requiring a weather-tight seal • EPDM Sealing Washer --- UV and Heat-Resistant • Special Underhead Design --- Reliable and consistent sealing • Made In The USA
SELF-DRILLING SCREWS SECURITY Where access is easy and the potential for tampering and theft is high, protect your investment with Tanner Security Fasteners. The cost of our security fasteners is minimal compared to the potential cost of replacing damaged or stolen solar panels.
SCREWS Torx® Tamper-Resistant 6-Lobe Torx Plus® Tamper-Resistant 5-Lobe • Cap Screws • Sheet Metal Screws • Self-Drilling Screws • Alloy Steel • Case Hardened • Zinc Plated, 18.8 & 410 Stainless Steel
BOLTS Trident™ Tamper-Resistant Bolts • Large diameter security fasteners, 5/8” and up • Steel and stainless steel • Made to order
NUTS Trident™ Tamper-Resistant Nuts • Zamak 5 Zinc Alloy • 316 Stainless Steel • Now Available Large Diameter Sizes • 5/8” • 3/4” • 7/8” • 1“A proprietary installation tool is available that is not for sale on the open market.
Break-Away Tamper-Resistant Nuts • Zamak 5 Zinc Alloy • 316 Stainless Steel
ANCHORS
Secure Wedge-Bolt® Heavy Duty Screw Anchor System • Button Head Torx® Tamper-Resistant Drive • One-Piece Heavy Duty Screw Anchor • Simple To Install, Fully Removable, Vibration Resistant • Designed to be used with a matched tolerance Wedge-Bit®
Fastener Sea l ing Sys tem
www.shoptanner.comTel: 800 456-2658 Fax: 888 434-3215
Minimize Cost Per Installed Kilowatt
For rack system assembly & installation
BoxBolt™
The Box Bolt™ is an expansion anchor for steel that can be used to make connections to structural tube sections. It is suitable for use with rectangular, square and circular sections where access is restricted to one side only. • No field drilling • No field welding • Quick assembly and installation of racks • Available in zinc plate finish, hot dip galvanized and stainless steel.
Wedge-Bolt®+ Hex Head Heavy Duty Screw Anchor SystemCode Compliant Anchors for Cracked & Uncracked ConcreteICC-ES Listed Building Code Solutions • Finished Hex Head • One-Piece Heavy Duty Screw Anchor • Simple To Install, Fully Removable, Vibration Resistant • Designed to be used with a matched tolerance Wedge-Bit®
Power-Stud®+ HD5 Wedge Expansion AnchorsGalvanized Body With Stainless Steel Clip • International Code Council, Evaluation Service (ICC-ES), ESR Pending • Tested in accordance with ACI 355.2 and AC193 criteria • Evaluated and qualified by an accredited independent testing laboratory for use in cracked and uncracked concrete including seismic and wind loading • Strength Design method according to ACI 318, Appendix D
ANCHORING SYSTEMS FASTENERS Tanner has supplied a full line of high quality fasteners at competitive prices to our customers for over thirty years. Our expert customer service staff will consult with you, evaluate your product and assembly requirements and recommend a fastener solution that lowers costs and improves efficiency.
304 and 316 Stainless Steel • Hex Cap Screws
• Hex Tap Bolts
• Hanger Bolts
• Lag Screws
• Nuts /Washers
• Socket Products
Rivets • Blind Rivets • Structural Rivets • Rivet Nuts • Hand Rivet Tools and Kits • Air/Hydraulic Rivet Tools
Solar Fastening SystemFor photovoltaic installations on wood and metal substructures • Direct transfer of loads into the substructure • No loads on the roof covering • Quick and simple retrofitting of existing roofs • Secure joint sealing of the roof penetrations • Minimal number of roof penetrations
Box Bolt ™
COMING SOON!
www.shoptanner.comTel: 800 456-2658 Fax: 888 434-3215
Minimize Cost Per Installed Kilowatt
For rack system assembly & installation
CORDED AND CORDLESS POWER TOOLS M.K. Morse CSM74B 7” Circular Metal Cutting Saw Premier 7" metal cutting circular saw designed to cut steel, stainless steel, aluminum and wood without producing sparks, heat, or burrs. The saw leaves a neat, clean finish every time - no need for coolant!
Makita LC1230 12” Metal Cutting Saw Fantastic for cutting light pipe, angle iron, tubing, conduit and channels, its D-shape handle means easy gripping.
Makita BCS550 18V LXT Lithium-Ion Cordless 5-3/8” Metal Cutting Saw Kit Cuts Unistrut® all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more
DeWalt DW268 VSR Versa-Clutch® Screwdriver The DW268 features the Versa-Clutch torque-adjustment system that dials the proper torque needed to efficiently drive fasteners without stripping or breaking them.
CUTTING TOOLS
Carbide Tipped Hole Cutters • Productive tool that is a cost effective alternative to bi-metal hole saws. • For cutting steel plate, iron, aluminum, copper, cast iron, stainless steel, fiberglass and plastics up to 1” thick.
Multi Step Drills Hex/Straight Shank • Multi Step Drills are an entire drill set in one cutting tool, and a must for all PV installers • Titanium Nitride Coated with a 1/4” Hex Shank or conventional straight shank
TOOLS
SAFETY EQUIPMENT
Fall ProtectionSafety at work means using the right equipment for your application. Engineered for safety in the most demanding environments, FallTech products are rugged, long lasting and constructed to provide quality, value and peace of mind.
• Harnesses
• Lanyards
• Rope Grabs
• Vertical & Horizontal Lifelines
• Roof Anchors
• Roofing Kits
Head, Hands, Eye and Ear Protection • Hard Hats
• Gloves
• Safety Glasses
• Earplugs
SEALANTSTITEBOND® WeatherMaster Metal Roof SealantSpecifically formulated to outperform all other sealant technologies, including silicones, tri-polymers, and polyurethanes • Offers exceptional adhesion to Kynar™ coated metal materials, along with standard metal, aluminum, steel, galvanized bonderized surfaces, plastics and glass • Available in over 50 colors, all of which match today’s popular metal roof and metal siding colors, regardless of the material or manufacturer. • It extrudes in extreme weather conditions (down to zero degrees Fahrenheit) and is UV-resistant, making it the ideal choice for exterior applications
DEWALT®