Orbiter 4.0 / 5.5Telescopic Conveyor Belt Car
Innovative Technologies for Ground Support Equipment
Telescopic Conveyor Belt Car Orbiter 4.0/5.5Adaptable to all types of aircraftEasy one-man-operationEfficient work-flow
Easy and effective handling is our plus
The Orbiter 4.0/5.5 is flexible and reliable even under extreme conditions. With its telescopic technology small aircraft can be handled without problems, too. Interesting equipment details like hydraulically suspended seats adjustable to the weight of the driv-er and also adjustable lengthwise and in height, show our claim for ergonomical vehicles as well as the clearly arranged operating controls in the driver‘s field of vision.
The design of our airport vehicles was based on an independent chassis especially developed for that purpose: Thus we achieve optimal load balance and outstanding dynamical characteristics, as well as quick and easy access to all important service points and components.
Ground Support with worldwide standards
The MULAG conveyor belt cars Orbiter 4.0/5.5 with electrical drive/diesel drive can be handled extremely well during maneuvering near the aircraft. Optional extras such as protection guards, load ramp, closed drivers cab, heating and preheating systems and much more guarantee an individual configuration to the customer‘s needs. The conveyor belt cars can be delivered with closed sound-isolated cab, cab without door or with an open driver‘s platform. With its telescopic conveyor the Orbiter 4.0/5.5 adapts flexibly and fast to different working conditions and deck heights.
MULAG-Quality makes an impact
Fully developed technology and more than 50 years of experience with the production of airport vehicles combined with the latest technical know-how are complemented by the highest manufac-turing quality, certified by DIN EN ISO 9001:2008. Thus we can guarantee high cost effectiveness with the use of our products:
� high availability and reliabilty � low cost of maintenance
Engine and PowertrainEngine * oil-/watercooled Deutz-Dieselmotor, 4 cylinders
D 2011 L04i , 36,4 kW / 50 HP at 2300 rpm
Drive Hydrostatic
Steering Hydraulic steering system
Brakes Dual circuit brake system with brake booster
Front axle Steering axle with disc brakes
Rear axle Wheel hub motors, flange-mounted to the frame
Electric system* 24 V, Batterien 2 x 100 Ah
Driving speed up to 25 km/h
Engine and PowertrainEngine 8 kW (AC)
Transmission Drive shaft onto differential axle
Steering Hydraulic steering system
Brakes Power brake, disc brakes in front, drum brakes rear, mechanical parking brake
Hydraulic aggregates 5 kW with tandem pump for belt drive, belt ciffing and steering / brake booster
Front axle Steering axle with disc brakes
Rear axle Differential axle with drum brakes
Electric system Continous drive with automatic deceleration
Driving speed up to 25 km/h
Diesel – approved drive technologySerial Equipment
� Robust industrial diesel engine � Telescopic conveyor belt with Rufftop-surface � Belt speed continously adjustable through hydraulics
(no motor speed change) � Two rubber wheels as protection at front end of boom � Step on rear belt frame � Hydraulic steering system � Standard road traffic lights and horn � Outside rear view mirrors � Hydraulically suspended driver‘s, individually adjustable � Safety belt � Roof window with safety guard ** � Wiper-washing system ** � Sun shield for driver ** � Fuel gauge � Working hour meter � Five emergency switch-offs � Guard railing for the driver ***
**with closed cab***only front with open cab
*other technical equipment on demand
Electrical drive - the alternative for GSESerial Equipment
� Telescopic conveyor belt with Rufftop-surface � Belt speed continously adjustable through hydraulics
(no motor speed change) � Two rubber wheels as protection at front end of boom � Step on rear belt frame � Hydraulic steering system � Dual circuit power-brake with brake booster � Standard road traffic lights and horn � Outside rear view mirrors � Hydraulically suspended driver‘s, individually adjustable � Safety belt � Roof window with safety guard *** � Wiper-washing system ** � Sun shield for driver ** � Indicator for Battery-Charging � Battery main switch � Five emergency switch-offs � Guard railing for the driver ***
*other technical equipment on demand**with closed cab***only front with open cab
Technical Data and Dimensions
approx. 150 mm
approx. 150 mm
Orbiter 4.0
Orbiter 5.5
Dimensions and Weights (4.0 / 5.5)Dead weight 3800 kg / 3950 kg (with battery)
Vehicle length 43570 mm / 5800mm (telescope retracted)
Vehicle width 1955 mm
Height over top of cab* approx. 2060 mm
Wheel base 2240 mm
Ground clearance approx. 150 mm
Turning circle 5380 mm / 5660 mm
Belt load, max. 100 kg/m
Single load, max. 200 kg
Belt speed 0 - 0,8 m/sec (36 m/min)
Belt length 4100 - 6100 mm / 5500 - 7500 mm
Belt height front, max. 3600 mm / 4200 mm
Belt height rear, max. 1250 mm / 1600 mm
Belt height front (Transp.) 1120 mm / 1200 mm
Belt height rear (Transp.) 830 mm / 710 mm
Inclination angle, max. 30°
Belt width 600 mm
Wheels/tires 195 R 14 C
*optional feature
Varia
tions
due
to d
iffer
ent c
onfig
urat
ions
pos
sible
(app
rox.
±5%
)
With the telescopic conveyor belt car Orbiter 4.0/5.5 pro-fessional ground support gets more flexible: Efficiently and fast all baggage loading/unloading tasks are accom-plished with any type of aircraft.
Through the high quality of workmanship long down times and service cycles are reduced to a minimum – ef-ficiency and economy on duty at airports!
At MULAG service comes first
Even the best vehicle design is of no avail without a strong and ef-ficient after-sales service during the whole lifecycle of a vehicle. This is where MULAG comes into play, with a reliable and quick supply of information and spare parts for our customers – you can count on us!
High-Tech is our crucial advantage!
The use of high-grade industrial components instead of standard components is crucial for the reduction of down times and need for service of our vehicles to a minimum! Overdimensioned power and loading capacities result in high reliability and safety – well known to our customers worldwide as MULAG Quality.
Our achievements in Ground Support are convincing!
Orbiter 4.0/5.5 – the telescopic Solution for Ground Support at airports
Efficient use under all working conditions – simply unbeatable!
Maximally lifted – conveyor in its highest working position
Flexible baggage loading/unloading with telescopic technology
Orbiter4.0 / 5.5
Visit us on Youtube and Facebook
MULAG FahrzeugwerkHeinz Wössner GmbH u. Co. KG
Gewerbestraße 877728 OppenauGermanyPhone +49 7804 913-0Fax +49 7804 913-159Email [email protected] www.mulag.com
© M
ULA
G F
ahrz
eugw
erk
Hei
nz W
össn
er G
mbH
u. C
o. K
G /
/ S
ubje
ct to
cha
nge
wit
hout
not
ice,
Dok
091
5_42
9en