TENDER DOCUMENT FOR PURCHASE OF: DIFFERENT ......00070 SPME002455 Piston Valve(Forbes Marshall)...

SECURITY PAPER MILL,HOSHANGABAD - 461005 (M.P), INDIA(A Unit of Security Printing and Minting Corporation of India Limited)(Whollyowned by Government of India)(Miniratna Category-I CPSE & ISO 9001:2008 & ISO 14001:2004 CERTIFIED)Website:http://spmhoshangabad.spmcil.comE-Mail:[email protected]:91-7574-255259,Fax No:07574-255170VAT/TIN No:23134202419&Excise Asse.Code:AAKCS4610BXM001

PR Number PR Date Indenter Department

10003491 14.11.2013 machnical E-STORE

10006090 10.01.2013 S K Parsai E&I-2/13

10008887 11.09.2013 HK Choudhary STORE(E)



10009322 08.11.2013 SR Foreman WS(M)

10009398 16.11.2013 RAJARAM UIKE MECH.88/13

Not Transferable

Security Classification:NON-SECURITY

TENDER DOCUMENT FOR PURCHASE OF: DIFFERENT TYPE OFVALVES

Tender Number: 6000003469/ME03/2235, Dated:18.12.2013

This Tender Document Contains__________Pages.

Details of Contact person in SPMCIL regarding this tender:

Name: SUDESH PANWARDesignation: Officer(Technical)Address: SPMH (Security Paper Mill,Hoshangabd)

India

Regd. Office:-Jawahar Vyapar Bhawan, Janpath, New Delhi-110001T01.1

Tender Number:6000003469

Section1: Notice Inviting Tender (NIT)

6000003469 /ME03/2235 18.12.2013(SPMCIL's Tender SI No.) (Date)

1. Sealed tenders are invited from eligible and qualified tenderers for supply of following goods & services:

Schd.No.

Brief Descriptionof Goods/services

Quantity(with unit)

Earnest Money(In Rs.)

Remarks

1 XL Rotary Union Type XLS (R.H.)

SPME0032156.000 EA 16000.00INR

0.00 VISIT OUR WEBSITEFOR DETAILDESCRIPTION OFITEM & TERMS &CONDITIONS

2 XL Rotary Union Type XLS (L.H.)

SPGE0004176.000 EA ---- DO ----

3 Cast Iron Dezuric Pulp Valve Size

-150mm SPME001602

6.000 EA ---- DO ----

4 Cast Iron Gate Valve Size -

200mm SPME001605

4.000 EA ---- DO ----

5 Bronze Sluice Gate Valve Size -

3/4"NB SPME001553

30.000 EA ---- DO ----

6 Bronze Sluice Gate Valve -3"NB

SPME00155810.000 EA ---- DO ----

7 Piston Valve(Forbes Marshall)

Size-25NB SPME002455

20.000 EA ---- DO ----

8 Pneumatic cyl.opp. Valve 50 NB

SPEI0025256.000 EA ---- DO ----

9 Knife Gate Valve Cl. Opp. 65 NB

SPEI0025264.000 EA ---- DO ----

10 Pneumatic Cyl. opp. Valve 80 NB

SPEI0013974.000 EA ---- DO ----

11 Bronze Steam Stop Valve

Screwed - 20Mm SPME003052

10.000 EA ---- DO ----

12 SS screwed End Ball Valve -

25mm SPME002958

15.000 EA ---- DO ----

13 SS Ball Valve - 1/2" (15mm)

SPME00294715.000 EA ---- DO ----

14 Bronze Horizontal Check Valve-2"

(50Mm)5.000 EA ---- DO ----

Regd. Office:-Jawahar Vyapar Bhawan, Janpath, New Delhi-110001Sec01.1


Schd.No.

Brief Descriptionof Goods/services

Quantity(with unit)

Earnest Money(In Rs.)

Remarks

SPME001546

15 Bronze Blowoff Valve Size -

2-1/2"(65Mm) SPME001528

2.000 EA ---- DO ----

16 Bronze Pressure Gauge Cock BE

3/8"(10mm) SPME001550

10.000 EA ---- DO ----

17 Cast Iron Gate Valve Size -

200mm SPME001605

4.000 EA ---- DO ----

18 Bronze Sluice Gate Valve Size -

3/4"NB SPME001553

30.000 EA ---- DO ----

19 PVC Non Returen Valve

(Vertical)Size-50m SPME033795

10.000 nos ---- DO ----

Type of Tender (Two Bid/ PQB/ EOI/ RC/ Development/Indigenization/ Disposal of Scrap/ Security Item etc.)

Dates of sale of tender documents:

Place of sale of tender documents

Closing date and time for receipt of tenders

Place of receipt of tenders

Time and date of opening of tenders

Place of opening of tenders

Nominated Person/ Designation to Receive BulkyTenders (Clause 21.21.1 of GIT)

ONE-BIDNational Competetive Bid

From 28.01.2014 to 17.03.2014 during office hours.

ADMN. OFFICE SPM, HOSHANGABAD

18.03.2014 11:00:00


18.03.2014 15:00:00


SUDESH PANWAROfficer(Technical)

2. Interested tenderers may obtain further information about this requirement from the above office selling thedocuments. They may also visit our website mentioned below for further details.

3. Tender documents may be purchased on payment of non-refundable fee of Rs 250/-(Rs. Two hundred and fiftyonly) per set in the form of account payee demand draft/ cashier#s cheque/ certified cheque, drawn on a scheduledcommercial bank in India, in favour of SECURITY PAPER MILL payable at HOSHANGABAD.

4. If requested, the tender documents will be mailed by registered post/ speed post to the domestic tenderers and byinternational air-mail to the foreign tenderers, for which extra expenditure per set will be Rs.100/-. The tenderer is toadd the applicable postage cost in the non-refundable fee mentioned in Para 3 above.

5. Tenderer may also download the tender documents from the web site http://spmhoshangabad.spmcil.com andhttp://eprocure.gov.in and submit its tender by utilizing the downloaded document, along with the requirednon-refundable fee as mentioned in Para 3 above.

6. Tenderers shall ensure that their tenders/ quotation/offer, duly sealed and signed, complete in all respects as perinstructions contained in the Tender Documents, may sent or dropped in the tender box or send by SpeedPost/Regd. Post/Courier/located at the address given below on or before the closing date and time indicated in the



Para 1 above, failing which the tenders will be treated as late and rejected.

7. Please quote our tender enquiry no., dated and date of opening of tenders on the top of the sealed envelopecontaining the signed quotation failing which the quotation treat as ignored and rejected.

8.In the event of any of the above mentioned dates being declared as a holiday/ closed day for the purchaseorganization, the tenders will be sold/ received/ opened on the next working day at the appointed time.

9. The tender documents are not transferable.

Note: - Bidder should confirm in your quotation, "Acceptance of all terms and condition of tender document withoutany deviation."

Sudesh PanwarOfficer Material - IIFor General Manager

CORRESPONDING ADDRESS---------------------THE GENERAL MANAGERSECURITY PAPER MILLHOSHANGABAD-461 005 (M.P.)Website: http://spmhoshangabad.spmcil.comE-MAIL:- [email protected], [email protected] :- 07574 - 279041-60 Ext.6587,6848 & 6947.FAX :- 07574-255170

COPY TO :- SK(E)/ DCE(M)/ OFFICE COPY

..........................................

..........................................(Name Designation, Adress telephone number etcof the officer signing the document)

For and on behalf of...........................................



Section II: General Instructions to Tenderers (GIT)Part 1: General Instructions Applicable to all type of Tenderers

Kindly refer http://spmhoshangabad.spmcil.com/spmcil/uploaddocument/GIT.pdf for further details.(GIT contains 32 pages).



Section II: General Instructions to Tenderers (GIT)Part II: Additional General Instructions Applicable to Specific type of Tenderers

Kindly refer http://spmhoshangabad.spmcil.com/spmcil/uploaddocument/GIT.pdf for further details.(GIT contains 32 pages).



Section III: Specific Instructions to Tenderers (SIT)The following Special Instructions to Tenderers will apply for this purchase. These special instructions will modify/substitute/ supplement the corresponding General Instructions to Tenderers (GIT) incorporated in Section II. Thecorresponding GIT clause numbers have also been indicated in the text below:In case of any conflict between the provision in the GIT and that in the SIT, the provision contained in the SIT shallprevail.(Clauses of GIT listed below include a possibility for variation in their provisions through SIT. There could be otherclauses in SIT as deemed fit.)

Sr No GIT ClauseNo.

Topic SIT Provision

04 11.2 Tender Currency SUPPLIER IS REQUESTED TO QUOTE PRICEWITHIN 2 DECIMAL PLACE.QUOTATION WITHPRICE QUOTE BEYOND 2 DECIMAL PLACE ISIGNORED

07 19 Tender Validity 90 DAYS

08 20.4 Number of copies of Tender to be submitted ONE COPY



Section IV: General Conditions of Contract (GCC)

Kindly refer http://spmhoshangabad.spmcil.com/spmcil/uploaddocument/GCC.pdf for further details.GCC contains (28 pages).



Section V: Special Conditions of Contract (SCC)

The following Special Conditions of Contract (SCC) will apply for this purchase. The corresponding clauses ofGeneral Conditions of Contract (GCC) relating to the SCC stipulations have also been incorporated below. TheseSpecial Conditions will modify/ substitute/ supplement the corresponding (GCC) clauses.Whenever there is any conflict between the provision in the GCC and that in the SCC, the provision contained in theSCC shall prevail.(Clauses of GCC listed below include a possibility for variation in their provisions through SCC. There could be otherclauses in SCC as deemed fit)

Sl.No.

GCC ClauseNo.

Topic SCC Provision

07 19.3 Option Clause APPLICABLE (AS PER GCC)

09 21.2 Taxes and Duties APPLICABLE (AS PER GCC)

10 22,22.1,22.2,22.4,22.3,22.6

Terms and Mode of Payments 100%PAYMENT ON RECEIPT AND SUITABILITYOF MATERIAL ON PRODUCTION OF ALLREQUIRED DOCUMENTS BY SUPPLIER BYRTGS/NEFT ONLY

11 24.1 Quantum of LD APPLICABLE (AS PER GCC)

13 33.1 Resolution of Disputes APPLICABLE (AS PER GCC)



Section VI: List of Requirements

ScheduleNo.

Breif Description of goods and services (RelatedSpecifications etc.are in Section-VII)

AccountingUnit

Quantity Amount of EarnestMoney

00010 SPME003215 XL Rotary Union Type XLS (R.H.) EA 6.000 16000.00 INR 0.00

00020 SPGE000417 XL Rotary Union Type XLS (L.H.) EA 6.000

00030 SPME001602 Cast Iron Dezuric Pulp Valve Size-150mm

EA 6.000

00040 SPME001605 Cast Iron Gate Valve Size - 200mm EA 4.000

00050 SPME001553 Bronze Sluice Gate Valve Size -3/4"NB

EA 30.000

00060 SPME001558 Bronze Sluice Gate Valve -3"NB EA 10.000

00070 SPME002455 Piston Valve(Forbes Marshall)Size-25NB

EA 20.000

00080 SPEI002525 Pneumatic cyl.opp. Valve 50 NB EA 6.000

00090 SPEI002526 Knife Gate Valve Cl. Opp. 65 NB EA 4.000

00100 SPEI001397 Pneumatic Cyl. opp. Valve 80 NB EA 4.000

00110 SPME003052 Bronze Steam Stop Valve Screwed -20Mm

EA 10.000

00120 SPME002958 SS screwed End Ball Valve - 25mm EA 15.000

00130 SPME002947 SS Ball Valve - 1/2" (15mm) EA 15.000

00140 SPME001546 Bronze Horizontal Check Valve-2"(50Mm)

EA 5.000

00150 SPME001528 Bronze Blowoff Valve Size -2-1/2"(65Mm)

EA 2.000

00160 SPME001550 Bronze Pressure Gauge Cock BE3/8"(10mm)

EA 10.000

00180 SPME001605 Cast Iron Gate Valve Size - 200mm EA 4.000

00190 SPME001553 Bronze Sluice Gate Valve Size -3/4"NB

EA 30.000

00200 SPME033795 PVC Non Returen Valve(Vertical)Size-50m

nos 10.000

Required Delivery Schedule : Within 30 Days from the date of issue of Notification Of Award/ P.O. whichever isearlier SALIENT FEATURES

1. Destination/ Delivery of Material: F.O.R/F.O.T. SPM, HOSHANGABAD (door delivery basis)duly unloaded throughregistered common carriers only.

2. Any tender/quotation/offer valid for a shorter period shall be treated as unresponsive & rejected.

3. Any dispute, arising out of the supply order/ contract will be subject to the exclusive jurisdiction of the competentcourt at Hoshangabad.

4. In case of order material in your favour for Rs. 1,50,000/- or above, the supplier shall furnish the performancesecurity amount/ Security Deposit(S.D) (10% of the ordered value) within 21 days after issue of Notification of Awardof Contract (NAC)by SPM, Hoshangabad in favour of The Security Paper Mill payable at Hoshangabad. Theperformance security will be return back without any interest to successful tenderer after the completion of allcontractual obligations.



5. If the tenderer desires to ask for excise duty, sales tax, custom duty, etc. to paid extra, the same must bespecified stated and should be shown separately. In the absence of any such stipulation the price will be takeninclusive of such duties and taxes and no claim for the same will be entertained later. Sales Tax may be issued, ifany applicable, with concessional form - C. For work/ service contract, TDS or any other applicable taxes shall bededucted from the firms bill.

6. Prices quoted by the tenderer shall remain firm and fixed during the currency of the contract and not subject tovariation on any account.

7. Discrepancy in prices

a. If, in the price structure quoted by a tenderer, there is discrepancy between the unit price and the total price(which is obtained by multiplying the unit price by the quantity), the unit price shall prevail and the total pricecorrected accordingly ,unless SPM feels that the tenderer has made a mistake in placing the decimal point in theunit price, in which case the total price as quoted shall prevail over the unit price and the unit price correctedaccordingly.

b. If there is an error in a total price, which has been worked out through addition and/or subtraction of subtotals, thesubtotals shall prevail and the total corrected

c. If there is a discrepancy between the amount ex pressed in words and figures, the amount in words shall prevailIf, as per the judgment of SPM , there is any such arithmetical discrepancy in a tender, the same will be suitablyconveyed to the tenderer by registered /speed post .If the tenderer does not agree to the observation of SPMCIL,the tender is liable to be ignored.

8. SPMs Right to Accept any Tender and to Reject any or All Tenders SPM reserves the right to accept in part or infull any tender or reject any tender without assigning any reason or to cancel the tendering process and reject alltenders at any time prior to award of contract, without incurring any liability, what so ever to the affected tenderer ortenderers.

9. Authorized representatives of the tenderers, who have submitted tenders on time may attend the tender opening,provided they bring with them letters of authority through firm.

10. The supplier shall be responsible till the entire stores contracted for arrive in good condition at SPM,Hoshangabad. The transit risk in this respect shall be covered by the Supplier by getting the stores duly insured

11. The supplier shall repair or replace the defective goods or parts thereof, free of cost, at the ultimate destinationi.e. SPM, Hoshangabad, if the material is rejected by SPM, Hoshangabad. The supplier shall take over the replacedparts/ goods after providing their replacements and no claim, whatsoever shall lie on SPM, Hoshangabad for suchreplaced parts/ goods thereafter.

12. If the supplier fails to deliver any or all of the goods or fails to perform the services within the timeframe(s)incorporated in the contract, SPM shall, without prejudice to other rights and remedies available to SPMunder the contract, deduct from the contract price, as liquidated damages, a sum equivalent to the 0.5 % percent ofthe delivered price of the delayed goods and/ or services for each week of delay or part thereof until actual deliveryor performance, subject to a maximum deduction of the 10% of the delayed goods# or services contract price(s).

13. EARNEST MONEY DEPOSIT:

Tender should be accomplished with Earnest /money Deposit (Non-interest bearing) of Rs.16,000/-(Rs SixteenThousand only) in the forms as given below.(a) Account Payee Demand Draft or(b) Fixed Deposit Receipt or



(c) Banker#s cheque.The demand draft, fixed deposited receipt or banker#s cheque shall be drawn on any scheduled commercial bank inIndia, in favour of SECURITY PAPER MILL PAYABLE AT HOSHANGABAD. The earnest money shall be valid for aperiod of fourty five days beyond the validity period of the tender.

14. TENDER VALIDITY:

The tender shall remain valid for acceptance for a period of 90 days after the date of tender opening prescribed inthe tender document. Any tender valid for a shorter period shall be treated as unresponsive & rejected.

15. PAYMENT TERMS

a. 100% Payment shall be done on receipt and acceptance of goods by the purchaser and on production of all required documents by the supplier.

b. Payment shall be done through RTGS/NEFT facility. Bidder should provide Bank Account details including Bank Account No, IFSC code No, RTGS/NEFT code No. Bank and branch Name along with their Bid. (GCC Clause No. 22.1)

16. COMPARISON ON F.O.R HOSHANGABAD BASIS

The comparison of the responsive tenders shall be on Total Price quoted FOR Hoshangabad basis as per PriceSchedule in Section-XI of the Tender document. The tenders received and accepted will be evaluated to ascertainthe best and lowest evaluated tender in the interest of the purchaser for the complete scope of supply as perTechnical specifications covered in the document.

17. OPTION CLAUSE

The General Manager, Security Paper Mill, Hoshangabad may reserve the right to increase the ordered quantity by25% at any time, till final delivery date of contract, by giving reasonable notice even through the quantity orderedinitially has been supplied in full before the last date of delivery period.

18. PRICE SCHEDULE

i) The bidders shall quote the price and other elements of price as per the format given as Section XI of this tender document. Insertion, post script, addition and alteration shall not be entertained. If any will not be calculated to decide the price.

ii) Price quoted by the tender shall remain firm and fixed during the currency of the contract and not subject to variation on any account (As per clause 14.1 of GIT)

iii) Conditional offer shall liable to rejection.

iv) Firm has to accept and confirm all the terms and conditions of tender enquiry without any deviations.

Note: THE FOLLOWING SECTION'S ARE NOT APPLICABLE FOR THIS TENDER: SECTION -XIII BANK GUARANTEE FORM FOR EMD SECTION XVIII SHIPPING ARRANGEMENTS FOR LINER CARGOES



Section VII: Technical Specifications

1. "XL" Roary Union type XLS having C.I. body and nikle plated M.S. shaft size: 3/4" BSP and with Right Handthread.

2. "XL" Roary Union type XLS having C.I. body and nikle plated M.S. shaft size: 3/4" BSP and with Left Handthread.

3. Cast Iron pulp valve (Gate valve) Body cast iron, gate S.S.316, spindle S.S.410, Flange face to face 57mm,PCD 235mm, 4 hole trapped & 4 hole free, size -150mm(6").MAKE:-HM,Sant,Leader,KSB,Forbes Marshall and D.P.Enterprises

4. Cast iron double flange gate valve with C.I. round handle non rising spindle and renewable G.M. working parts.Size-8"(200mm), flange IS:780 PN-10 (face to face distance-318mm),center to top 780mm, body 300 PSIG Hyd.seat 200 PSIG Hyd.MAKE:-HM,Sant,Leader,KSB,Forbes Marshall and D.P.Enterprises

5. Bronze gate valve size:-3/4" (20mm)GM sluice gate valve ISI Marked as per IS:778,class-1,screwed in side bonnet,inside screwed non rising spindleetc.BTM-1.5MPA hydrolic and seat 1.0MPA hydrolic with MFG T/C.Make: HM,Sant,Leader,KSB,Forbes Marshall and D.P.enterprises."

6. Bronze Sluice Gate Valve -3# NBAs per IS: 778/1980 class-I ISI Mark screwed in bonnet inside non rising steam integral seat sold wedge-Trim cualloy screwed female threads to IS:554(parallel)BTP=1.5mpa hyd stp 1.0mpa hyd.MAKE:-Leader,sant,KSB,Crescent,Skilt,Forbes-Marshal/Kiloskar/GG.

7. Seatless and glandless piston valve , forged carbon steel body screwed ends Size:-25NB Make;Forbes-Marshal,KSB,Leader,sant Crescent,

8. Pneumatic cyl.opp. Valve 50 NBPneumatic cylinder operated double acting split body knife gate valve application for 4% consistency pulp(zeroleakage) flange pn 10.Make - Orbinox/ vabs/lohse/festo.

9. Knife Gate Valve Cl. Opp. 65 NBPneumatic cylinder operated double acting split body knife gate valve application for 4% consistency pulp(zeroleakage) flange pn 10.Make - Orbinox/ vabs/lohse/festo.

10. Pneumatic cylinder operatted double acting split body knife gate valve. size: 80nb flange pn 10 app-pulp 4% cnsitency(zero leakge)Make - Orbinox/ vabs/lohse/festo.

11. Bronze steam stop valve screwed # 20mmBronze globe steam stop valve (straight Type) screwed rising stem spindle with bolt seat arrangement in SS partsscrewed female ends with BSPT thread suitable for 250 PSI working pressure with IBR test certificate.MAKE:-Leader,sant,KSB,Crescent.

12. SS AISI(304) forged steel screwed end BSP female thread handle operated ball valve size:-1"(25mm).MAKE:-Leader,sant,KSB,Crescent.

13. SS AISI(304) forged steel screwed end BSP female thread handle operated ball valve size:-1/2"(15mm).



MAKE:-Leader,sant,KSB,Crescent.

14. G.M. horizontal lift check valve screwed bonnet body tested to 1.0mpa hydraulic female screwed end, valveconfirming to 778 class III ISI marked. Size-2"(50mm).MAKE:-Leader,sant,KSB,Crescent.

15. Bronze Blowoff Valve Size- 2-1/2# (65 mm)Bronze parallel slide blow Down valve with SS/manual working partsRack and piston operated heavy pattern flanged ends with operating key flanges to BS-10 table"H" max B.O.P. 250PSIG max. temp. 428 Degree F(220 Degree C)tested to 500 PSIG Hyd. with IBR test certificate. Flange to flangedistance 219mm .seat 500 PSIG.

16. Gun metal pressure gauge cock Size:-3/8"(10mm) screwed female threads both ends, Body test pressure 300PSIG hydraulic , sheet test pressure 100 PSIG. With work test certificate.

17. Cast iron double flange gate valve with C.I. round handle non rising spindle and renewable G.M. working parts.Size-8"(200mm), flange IS:780 PN-10 (face to face distance-318mm),center to top 780mm, body 300 PSIG Hyd.seat 200 PSIG Hyd.MAKE:-HM,Sant,Leader,KSB,Forbes Marshall and D.P.Enterprises

18. Bronze gate valve size:-3/4""(20mm)GM sluice gate valve ISI Marked as per IS:778,class-1,screwed in side bonnet,inside screwed non rising spindleetc.BTM-1.5MPA hydrolic and seat 1.0MPA hydrolic with MFG T/C.Make: HM,Sant,Leader,KSB,Forbes Marshall and D.P.enterprises."

19. PVC Vertical Non Return Valve Size-2"(50 mm ).Female thread 2"BSP.

Note:- Bidder should confirm technical specification of material as per the tender document.



Section VIII: Quality Control Requirements

As per technical specification of Section VII of tender document.



Section IX: Qualification/Eligibility Criteria

NOT APPLICABLE



Section X: Tender FormDate:

To,Security Paper Mill, HoshangabadA Unit of Security Printing & MintingCorporation of India Limited(Wholly Owned by Govt. of India)Hoshangabad

Ref: Your Tender document No.6000003469 /ME03/2235 dated 18.12.2013

We, the undersigned have examined the above mentioned tender enquiry document, including amendmentNo............., dated.......... (if any), the receipt of which is hereby confirmed. We now offer to supply and deliver........................................ (Description of goods and services) in conformity with your above referred document forthe sum of _____________ (total tender amount in figures and words), as shown in the price schedule(s), attachedherewith and made part of this tender.If our tender is accepted, we undertake to supply the goods and perform the services as mentioned above, inaccordance with the delivery schedule specified in the List of Requirements.We further confirm that, if our tender is accepted, we shall provide you with a performance security of requiredamount in an acceptable form in terms of GCC clause 6, read with modification, if any, in Section V - 'SpecialConditions of Contract', for due performance of the contract.We agree to keep our tender valid for acceptance for a period up to ................, as required in the GIT clause 19,read with modification, if any in Section-III - 'Special Instructions to Tenderers' or for subsequently extended period,if any, agreed to by us. We also accordingly confirm to abide by this tender up to the aforesaid period and thistender may be accepted any time before the expiry of the aforesaid period. We further confirm that, until a formalcontract is executed, this tender read with your written acceptance thereof within the aforesaid period shall constitutea binding contract between us.We further understand that you are not bound to accept the lowest or any tender you may receive against yourabove-referred tender enquiry.

...................................(Signature with date)

...................................... (Name and designation)

Duly authorized to sign tender for and on behalf of

...................................................

...................................................



Section XI: Price Schedule

The Price bid should clearly indicate the break-up of the price as under:-------------------------------------------------------------Sr.No. Price Break Up ---- Rate For item No.-1 to item No.-19.

------------------------------------------------------------1. Basic Price per unit------------------------------------------------------------2. Packing and Forwarding charges------------------------------------------------------------3. Ex.Duty in percentage(%)only------------------------------------------------------------4. CST (with/without#C#form)/VAT in percentage (%) only------------------------------------------------------------5. Freight charges (Please specify)------------------------------------------------------------6. Total Price (F.O.R, SPM, H#bad) (in figures only) per unit Rs.--------------------------------------------------------------------7. Total Quantity------------------------------------------------------------8. Total Price (F.O.R, SPM, H#bad) (in figures only) Rs. --------------------------------------------------------------------9. Total Price (in words only) Rupees ----------------------------------------------------------------------Special Condition:

1.Destination/ Delivery of Material: F.O.R/F.O.T. SPM, HOSHANGABAD Only.2. Tender Validity: 90 days after the date of tender opening prescribed in the tender document.3. Payment terms: 100% payment will be made after satisfactory completion of order.4. Delivery Schedule: Within 30 Days.5. Levies/Taxes would not be paid on Forwarding & Freight charges.6. Bidder should mention separately regarding Duties/Taxes etc., whether they are chargeable extra or inclusive inthe price.7. Price bids are to be given in the above format only. Conditional price bids may liable to be rejected.8. Bidder should accept all the above condition without any deviation otherwise offer will be rejected without anycommunication.Note: Quote your rates in your quotation as per the given above price schedule format only.

EVALUATION CRITERIA FOR L1 BIDDERThe method of evaluation of L1 bidder for awarding the Contract shall be on item wise price quoted by the bidder asper Section-XI(Price Schedule) of this tender document.

SIGNATURE OF BIDDER(WITH NAME, DESIGNATION AND SEAL)



Section XII: QuestionnaireThe tenderer should furnish specific answers to all the questions / issues mentioned below. In case a question /issue does not apply to a tenderer, the same should be answered with the remark "not applicable".Wherever necessary and applicable, the tenderer shall enclose certified copy as documentary proof / evidence tosubstantiate the corresponding statement.In case a tenderer furnishes a wrong or evasive answer against any of the under mentioned question/ issues, itstender will be liable to be ignored.1. Brief description and of goods and services offered:2. Offer is valid for acceptance up to .....................................................3. Your permanent Income Tax A/ C No. as allotted by the Income Tax Authority of Government of India:Please attach certified copy of your latest/ current Income Tax clearance certificate issued by the above authority.4. Status :a) Are you currently registered with the Directorate General of Supplies & Disposals (DGS&D), New Delhi, and / orthe National Small Industries Corporation (NSIC), New Delhi, and / or the present SPMCIL and / or the Directorate ofIndustries of the concerned State Government for the goods quoted ? If so, indicate the date up to which you areregistered and whether there is any monetary limit imposed on your registration.b) Are you currently registered under the Indian Companies Act, 1956 or any other similar Act?Please attach certified copy(s) of your registration status etc. in case your answer(s) to above queries is inaffirmative.5. Please indicate name & full address of your Banker(s) :6. Please state whether business dealings with you currently stand suspended/ banned by any Ministry/ Deptt. ofGovernment of India or by any State Govt.

................................(Signature with date)

..............................

..............................(Full name, designation & address of thePerson duly authorized sign on behalf of the tenderer)For and on behalf of

...............................

................................ (Name, address and stamp of the tendering firm)



Section XIV: Manufacturer's Authorization FORMTo,Security Paper Mill, HoshangabadA Unit of Security Printing & MintingCorporation of India Limited(Wholly Owned by Govt. of India)Hoshangabad

Dear Sirs,

Ref.: Your Tender document No..................................................... dated..............

We..................................................................... who are proven and reputable manufacturers of................................... (name and description of the goods offered in the tender) having factories at......................................... here by authorize Messrs........................................... (name and address of the agent) tosubmit atender, process the same further and enter into a contract with you against your requirement as contained in theabove referred tender enquiry documents for the above goods manufactured by us.We further confirm that no supplier or firm or individual other than Messrs................................. (name and addressof the above agent) is authorized to submit a tender, process the same further and enter into a contract with youagainst your requirement as contained in the above referred tender enquiry documents for the above goodsmanufactured by us.We also hereby extend our full warranty, as applicable as per clause 16 of the General Conditions of Contract readwith modification, if any, in the Special Conditions of Contract for the goods and services offered for supply by theabove firm against this tender document.Yours faithfully,

.............................................

.............................................. [Signature with date, name and designation]

Note: This letter of authorization should be on the letter head of the manufacturing firm and should be signed by aperson competent and having the power of attorney to legally bind the manufacturer.



Section XV: Bank Guarantee Form for Performance Security....................................................[insert: Bank's Name, and Address of issuing Branch or Office]Beneficiary: .............................. [insert: Name and Address of SPMCIL]Date:.........................PERFORMANCE GUARANTEE No.: ..................................WHEREAS................................................................................... (name and address of the supplier) (hereinaftercalled "the supplier") has undertaken, in pursuance of contract no..................................... dated ..............to supply(description of goods and services) (herein after called "the contract").

AND WHEREAS it has been stipulated by you in the said contract that the supplier shall furnish you with a bankguarantee by a scheduled commercial bank recognized by you for the sum specified therein as security forcompliance with its obligations in accordance with the contract;

AND WHEREAS we have agreed to give the supplier such a bank guarantee;

NOW THEREFORE we hereby affirm that we are guarantors and responsible to you, on behalf of the supplier, up toa total of .............................................................................. (amount of the guarantee in words and figures), and weundertake to pay you, upon your first written demand declaring the supplier to be in default under the contract andwithout cavil or argument, any sum or sums within the limits of (amount of guarantee) as aforesaid, without yourneeding to prove or to show grounds or reasons for your demand or the sum specified therein.

We hereby waive the necessity of your demanding the said debt from the supplier before presenting us with thedemand. We further agree that no change or addition to or other modification of the terms of the contract to beperformed thereunder or of any of the contract documents which may be made between you and the supplier shallin any way release us from any liability under this guarantee and we hereby waive notice of any such change,addition or modification.

We undertake to pay SPCMIL up to the above amount upon receipt of its first written demand, without SPMCILhaving to substantiate its demand.

This guarantee will remain in force for a period of forty five days after the currency of this contract and any demandinrespect thereof should reach the bank note later than the above date.

.........................................................................(Signature with date of the authorized officer of the Bank)

.............................................................

.............................................................Name and designation of the officer

.............................................................Seal, name & address of the Bank and address of the Branch

............................................................Name and designation of the officer

............................................................

............................................................Seal name& address of the Bank and address of the Branch



Section XVI: Contract FormContract No..............dated.............This is in continuation to this office' Notification of Award No................... dated ....................1. Name & address of the Supplier: ..........................................2. SPMCIL's Tender document No........... dated...........and subsequent Amendment No............ dated........... (If any),issued by SPMCIL3. Supplier's Tender No............. dated...........and subsequent communication(s) No.............. dated......... (If any),exchanged between the supplier and SPMCIL in connection with this tender.4. In addition to this Contract Form, the following documents etc, which are included in the documents mentionedunder paragraphs 2 and 3 above, shall also be deemed to form and be read and construed as part of this contract:(i) General Conditions of Contract;(ii) Special Conditions of Contract;(iii) List of Requirements;(iv) Technical Specifications;(v) Quality Control Requirements;(vi) Tender Form furnished by the supplier;(vii) Price Schedule(s) furnished by the supplier in its tender;(viii) Manufacturers' Authorization Form (if applicable for this tender);(ix) SPMCIL's Notification of AwardNote: The words and expressions used in this contract shall have the same meanings as are respectively assignedto them in the conditions of contract referred to above. Further, the definitions and abbreviations incorporated underclause 0 of Section - V - 'General Conditions of Contract' of SPMCIL's Tender document shall also apply to thiscontract.5. Some terms, conditions, stipulations etc. out of the above-referred documents are reproduced below for readyreference:(i) Brief particulars of the goods and services which shall be supplied/provided by the supplier are as under:(ii) Delivery schedule(iii) Details of Performance Security(iv) Quality Control(a) Mode(s), stage(s) and place(s) of conducting inspections and tests.(b) Designation and address of SPMCIL's inspecting officer(v) Destination and dispatch instructions(vi) Consignee, including port consignee, if any(vii) Warranty clause(viii) Payment terms(ix) Paying authority......................................(Signature, name and address of SPMCIL's authorized official)For and on behalf of..............Received and accepted this contract..................................................(Signature, name and address of the supplier's executive duly authorized to sign on behalf of the supplier)For and on behalf of...........................................(Name and address of the supplier).................................. (Seal of the supplier)Date:Place:



Section XVII: Letter of authority for attending a Bid openingThe General Manger,Security Paper Mill, Hoshangabad.

Subject: Authorization for attending bid opening on 18.03.2014 in the Tender of DIFFERENT TYPE OF VALVES.

Following persons are hereby authorized to attend the bid opening for the tender mentioned above on behalf of___________________ __________(Bidder) in order of preference given below.

Order of Preference Name Specimen Signatures

1.

1.

Alternate representative

Signatures of bidder or

Officer authorized to sign the bid

Documents on behalf of the bidder.

Note:

1. Maximum of two representatives will be permitted to attend bid opening. In cases where it is restricted to one,first preference will be allowed. Alternate representative will be permitted when regular representatives are not ableto attend.2. Permission for entry to the hall where bids are opened may be refused in case authorization as prescribedabove is not recovered.



Section XIX: Proforma of Bills for Payments(Refer to Clause 22.6 of GCC)

Name and Address of the Firm.................................................................................................Bill No....................................................................Dated.......................................................Purchase order..................................................No...................................Dated......................Name and address of the consignee.........................................................................................

S.No Authority for Purchase Description of Stores No.orqty.

Rate Rs.P.

Priceper Rs.

Amount

Total

1. C.S.T./Sales Tax Amount

2. Freight (if applicable)

3. Excise Duty (if applicable)

4. Packing and Forwarding charges (if applicable)

5. Others (Please specify)

6. PVC Amount (with calculation sheet enclosed)

7. (-) deduction/Discount

8. Net amount payable (in words Rs.)

Despatch detail RR No. other proof of despatch...............................................Dated............................................................(enclosed)

Inspection Certificate No............................................Dated..................(enclosed)

Income Tax Clearance Certificate No...........................Dated..................(enclosed)

Modvat Certificate No...........................................................................(enclosed)

Excise Duty Gate pass........................................................................(enclosed)

Place and Date



Received Rs..............................(Rupees).........................................................

I hereby certify that the payment being claimed is strictly in terms of the contract and all the obligations on the part ofthe supplier for claiming that payment has been fulfilled as required under the contract.

Revenue stamp Signature and of Stamp Supplier



Mailing List (List of Vendors)

S.No. Vendor Number Vendor name Vendor Address

1 SPMCIL Security Printing and Minting Security Printing and MintingSPMLDelhi 110001


Date post:	02-Apr-2021
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times