8150 Series Terminal Boxes C INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357 Ready-Term ® 8150 Terminal Boxes Features • Enclosures made of stainless (AISI 304) or (AISI 316L) • Optional hinges with cam locks or screws cover • Hinged Versions 130° opening angle • -60°C to +70°C Ambient tem- perature Standard Range • Circumferential protection channel prevents water entry • External Grounded connection • Flange plate screwed on from the outside enables simple installation • Degree of protection IP66 • including IECEx, ATEX, NEC & CEC (Class 1, Division2) INMETRO, GOST TERMINATION
Transcript
8150 Series Terminal Boxes
C
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
Ready-Term ®8150 Terminal Boxes Features
• Enclosures made of stainless ������������� ������� �(AISI 304) or (AISI 316L)
• Optional hinges with cam locks or screws cover
• Hinged Versions 130° opening angle
• -60°C to +70°C Ambient tem-perature Standard Range
• Circumferential protection channel prevents water entry
• External Grounded connection • Flange plate screwed on from
the outside enables simple installation
• Degree of protection IP66 • �������������������� ��������
including IECEx, ATEX, NEC & CEC (Class 1, Division2) INMETRO, GOST
TERMINATION
C1
TERMINATION Ready-Term® 8150 Terminal Boxes
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
ELECTRICAL AND MECHANICAL DATA SHEET
Explosion Protection
Marking
Version IECExGas Explosion Protection
Dust Explosion Protection
Europe (ATEX)Gas Explosion Protection
Dust Explosion Protection
USA Gas Explosion Protection
Class 1, Zone 1 AEx e IIC (T.*)Class 1, Zone 1 AEx de IIC (T.*)Class 1, Division 2, Groups ABCD-60°C to +40°C(T6)*-60°C to +55°C(T5)*-60°C to +85°C(T4)*IP54 (with breather)IP66 (without breather)Enclosure Type 3,4,4X, IP66
Electrical Data Rated Operation Voltage
Rated Operation Current
Mechanical Data Environmental Protection Material Enclosure Gaskets Cover Options
Flange Plate Standard Version Special Version Wall Thickness Enclosure Cover Cover screws tightening torque Extrenal Connection Wire Size
Ex tb IIIC IP66 T80 °C (Ta= -60...+40 °C)Ex tb IIIC IP66 T95 °C (Ta= -60...+55 °C)Ex tb IIIC IP66 T130 °C (Ta= -60...+70 °C)
II 2 G Ex db eb ia/ib mb IIA, IIB, IIC T6 (Ta= -60...+40 °C)
II 2 G Ex db eb ia/ib mb IIA, IIB, IIC T5 (Ta= -60...+55 °C)
II 2 G Ex db eb ia/ib mb IIA, IIB, IIC T4 (Ta= -60...+70 °C)
II 2 D Ex tb IIIC IP66 T80°C (Ta= -60...+40°C)
II 2 D Ex tb IIIC IP66 T95°C (Ta= -60...+55°C)
II 2 D Ex tb IIIC IP66 T130°C (Ta= -60...+70°C)
CanadaGas explosion protection
Class 1, Zone 1 Ex e IIC (T.*)Class 1, Zone 1 Ex de IIC (T.*)Class 1, Division 2, Groups ABCD-60°C to +40°C(T6)*-60°C to +55°C(T5)*-60°C to +85°C(T4)*IP54 (with breather)IP66 (without breather)Enclosure Type 3,4,4X, IP66
II 2 G Ex ia/ib IIA, IIB, IIC T6 (Ta= -60...+75 °C)
II 2 D Ex tb IIIC IP66 T80°C(Ta= -60...+40 °C)
IECEx IECEx PTB 09.0048
Europe-ATEX PTB 09 ATEX 1108
USA/Canada File #E1177842
Technical Data
���������
Max. 1100 V depending on terminal types and explosion protected components usedMax. 630 A depending on terminal types and explosion protected components used
See Explosion Protection Datadepending on terminal types and explosion protected components usedIP66 acc. to IEC/EN 60529��� ������������������!�������"����������#$%�����&�����&Silicone foamed-with captive M6 stainless steel combo head screws or -with hinges/ cam locksDouble-bit key no.5 for cam lock included
'��&����< ����� ��'��&�< ����� ���(1.5mm) min~14 ga (2mm)4.5 NmM8 hex screw Max. 600 kcmil (300mm2)depending on terminal types and explosion protected components used
TERMINATION
ADVANTAGES OF THE SERIES 8150
Preselection table:
Ready-Term® 8150 Terminal Boxes
The new form of the edges allows quick water drainage and prevents water from accumulating around the gasket.This solution helps to increase the safety inside
the enclosure.
The flange plate mounted from the outside is another advan-tage of this enclosure:This guarantees a perfect accessibility - even if the cables are already built-in.
The large beam width allows you a comfortable access and an easy and fast han-dling.
If a regular access is required, the version equipped with a sash lock (or a hinge) is rec-ommended.
The enclosure comes with an external ground connection.
8150/ a - bbbb - cccc - ddd - e f g h - i jjj - kk L
a (regulations)1 = Ex e or Ex e ia/ib or AEx2 = Ex i
Example: 8150/1-0400-0300-230-2311-a012-fpabc
Description: 400x300x230, 304sst, no hinge, with 2.5mm2 (12)
� �?�� ��@�< ����� ������������@�J@�Q
bbbb (width) 0176 mm (6.93”)0236 mm (9.39”)0300 mm (11.81”)0360 mm (14.17”)0400 mm (15.75”)0550 mm (21.65”)0600 mm (23.62”)0727 mm (28.62”)0787 mm (30.98”)0800 mm (31.50”)1000 mm (39.37”)
ddd (depth) 091 mm (3.58”)150 mm (5.91”)190 mm (7.48”)230 mm (9.06”) 300 mm (11.81”)
jjj (terminal quantity)# of terminals (ie. 012 = 12 terminals)
cccc (height) 0166 mm (4.57”) 0176 mm (6.92”)0200 mm (7.87”)0360 mm (14.17”) 0300 mm (11.81”)0400 mm (15.75”)0600 mm (23.62”) 0760 mm (29.92”) 0787 mm (30.98”)1000 mm (39.37”) 1200 mm (47.24”)1600 mm (62.99”)
f (surface)3 = brushed
���� ����������FP = Flange Plate (optional)
g (cover attachment)1 = screws only2 = cover with hinge and sash lock
��� ������������������A = Flange Plate Side AB = Flange Plate Side BC = Flange Plate Side CD = Flange Plate Side D
h = 1 always
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357 C2
C3
TERMINATION
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
DIMENSIONS OF SCREW COVER ENCLOSURES
Note: To specify intrinsically safe terminals, change to 8150/2. To change to 304 stainless, change “3” to a “2” (ie 3311 to 2311). Custom sizes are available. Contact R. STAHL for more information.
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
TERMINATION
C4
Ready-Term® 8150 Terminal BoxesJUNCTION BOX DIMENSIONAL DATA
9,5
G H
E
F
ø 7 mm / 0.28 "
7 m
m /
0.2
8 "
25 mm / 0.98 "
b1
c1
c2b2
a2
a1
D
C
A B
C5
TERMINATION
INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357
Ready-Term® 8150 Terminal Boxes
Note: To specify intrinsically safe terminals, change to 8150/2. To change to 304 stainless, change “3” to a “2” (ie 3321 to 2321).Custom sizes are available. Contact R. STAHL for more information.
