Termo solar - abtehnic.ro · MONTAJ/ASSEMBLY Tipuri de montaj si materiale / Assembly and materials...

Termo solar Solar thermal

switch on the sun!

comuta pe soare!

04

14161820222426

28

30

32333435

36373839

404141424243444445

46

De ce ar trebui sa alegeti energia solara?Why should you choose solar thermal power?

COLECTORI SOLARI/SOLAR COLLECTORS

colectori plani / flat plate collector P20colectori plani / flat plate collector AS30

colectori plani / flat plate collector H2000colectori modulari plani / large area module collector P20Gcolectori modulari plani / large area module collector AS3A

colectori modulari plani / large area module collector ASBcolectori modulari la comanda / custom module collector AS3AM0- P20GM0

PANOURI ABSORBANTE PENTRU PISCINE/SOLAR ABSORBERS FOR SWIMMING POOL

OKUMONTAJ/ASSEMBLY

Tipuri de montaj si materiale / Assembly and materials

REGULATOARE SOLARE/SOLAR REGULATORS

REGA01

REGTD1

REGTD2

REGC05/I5

UNITATI DE POMPARE INSTALATII SOLARE/PUMP UNITS

FST256

FST257

SST213

SST310

ACCESORII INSTALATII SOLARE/ACCESSORIES FOR PLANTS

agent frigorific / liquid solar

aerisitor / deaerator

vas de expansiune / expansion vessels

robinet cu doua cai / valve a two way

robinet cu trei cai / valve a three way

robineti de amestec / mixing valves

sonde de temperatura / temperature probe

racord sonda / probe collector connection

modul calorimetru / calorimeter designed

FORMULAR COLECTARE DATE SISTEME TERMO SOLARE/

DATA COLLECTION FORM FOR SOLAR THERMAL SYSTEMS

cuprins/index

SPF Solartechnik PrüfungForschung

04

Soarele este o sursa inepuizabila de energie. Nu toata energia produsa de soare ajunge insa pe suprafata pamantului; o parte este blocata de catre straturile superioare ale atmosferei, o parte este reflectata inapoi in spatiu, o parte este dispersata si difuzata in alte directii de catre moleculele de aer si particulele de praf din atmosfera, o parte este absorbita de catre vaporii de apa, bioxid de carbon si ozon.

Radiatia care ajunge pe o suprafata se numeste radiatie solara globala si este suma a trei factori:

• Radiatia directa: partea care nu este absorbita sau difuzata de catre particulele din atmosfera si astfel ajunge pe suprafata pamantului.

• Radiatia difuza: partea care este difuzata dar reuseste sa ajunga pe suprafata colectorului.

• Radiatia reflectata: radiatia care ajunge pe suprafata pamantului dupa ce a fost reflectata de catre alte suprafete sau de catre atmosfera.

Energia solara care ajunge pe suprafata pamantului este de aproximativ 1.000 W/m2. Totusi aceasta valoare variaza in functie de intrebuintarea optima a panourilor solare:

• Inclinarea panoului solar: in general, unghiul optim pentru a obtine cel mai mare nivel de energie este cu aproximativ 10 grade mai putin decat latitudinea in cauza . Pentru latitudinea noastra circa 42° (Italia), inclinarea optima a panoului in Italia este de 30°.

• Orientarea panoului: orientarea ideala este spre Sud, dar rezultate satisfacatoare se pot obtine si cu variatii spre sud-est si sud-vest.

• In functie de ora si de perioada anului

• In functie de latitudine

• Conditii meteo: intr-o zi cu nori componenta difuza are insemnatate mai mare decat componenta directa.

The sun is an inexhaustible source of energy. Not all the energy produced by the sun reaches the surface of the earth however; part is blocked by the outer layers of the atmosphere; part is refl ected back into space; part is dispersed and diffused in other directions by air molecules and dust particles in the atmosphere; part is absorbed by water vapour, carbon dioxide and ozone.

The radiation that strikes a surface is called global solar radiation and is the sum of three factors:

• Direct radiation: the part that isn’t absorbed or diffused by the particles in the atmospheric and therefore reaches the surface of the earth.

• Diffused radiation: the part diffused, but which in any case manages to strike the surface of the solar collector.

• Reflected radiation: the radiation that reaches the earth’s surface after having been refl ected off other surfaces or the earth’s atmosphere.

The solar energy that reaches the surface of the earth is equal to roughly 1,000 W/m2. This value varies however, in relation to the optimal use of solar panels, on the basis of:

• The inclination of the solar panel: in approximate terms, the optimal angle for the highest energy production is roughly 10 degrees less than the latitude in question. For our latitudes, roughly 42°, the optimal inclination in Italy is 30°.

• Orientation of the panel: the ideal orientation is South, but satisfactory results can also be obtained with southeast and southwest variations.

• The time of day and year.

• The latitude.

• Weather conditions: on a cloudy day the diffused component has a greater effect than the direct component.

Radiatia solaraDe ce ar trebui sa alegeti energia solaraSolar radiationWhy should you choose solar thermal power

05

In 15 minute soarele iradiazapamantul cu suficienta caldura incat poate satisface intreaga cerinta anuala de energie a populatiei mondiale.

In 15 minutes the sun irradiates the earth with enough heat to satisfy the entire annual energyrequirements of the world’spopulation.

Irradiation W/m2

Mainly diffused radiation Mainly direct radiation

In plus fata de protectia mediului (energia solara nu produce emisii poluante) exista si avantaje economice.

Folosirea sistemelor solare trebuie incurajata deoarece:

• Tehnologia sistemelor solare este foarte eficienta si are costuri rezonabile.

• Costurile de intretinere sunt minime.

• Costurile initiale ale instalatiei pot fi amortizate destul de repede; exista diverse programe publice de stimulare care fac aspectul economic si mai favorabil.

• Energia obtinuta nu depinde de variatiile de pret din decursul anilor.

• Energia solara este o sursa mereu disponibila si nu poate fi restrictionata si conditionata: face familia si comunitatea independenta.

O reducere a poluarii cu emisii de CO2, ce cauzeaza efectul de sera si incalzirea globala.

In addition to the protection of the environment (solar energy produces no polluting emissions) there are also economic advantages.

The use of thermal solar systems should be encouraged because:

• Solar thermal technology has a very reasonable cost and is very efficient.

• Minimum maintenance costs.

• The initial cost of the system can be paid off quite quickly; there are forms of public economic incentives that make the economic aspect even more favourable.

• The energy obtained isn’t subject to price variations over the years.

Safe investment.

• Solar energy is a source which is always available and isn’t subject to restrictions and conditions: it makes the family and community independent.

ENERGIA SOLARA ESTE O RESURSA CURATA SI SUSTENABILA, DE VALOARE ECONOMICA IMPORTANTA, DISPONIBILA TUTUROR.

SOLAR ENERGY IS A CLEAN AND SUSTAINABLE RESOURCE, OF A NOTABLE ECONOMIC VALUE, AVAILABLE TO ALL.

In principal radiatie difuza In principal radiatie directa

Radiatia w/mp

06

AplicatiiSolutii tehnice posibile ApplicationsThe technical variations possible

Diagrame ale traiectoriei solareSunpath diagrams

Aplicatiile uzuale sunt instalatiile de apa calda menajera, incalzire ambientala si incalzirea piscinelor; exista de asemenea o crestere a interesului in sectoarele industrial si agricol, cat si pentru instalatii hoteliere si chillere solare. Colectorii solari pentru piscine pot furniza pana la 100% din necesarul de incalzire. Cu atat mai mult, acestea sunt instalatiile cu montajul cel mai simplu.

The most common applications are DHW plants, ambient heating plants and swimming pool heating plants; and there is growing interest in industrial and agricultural sectors, as well as in installations for hotels and solar chillers. Solar collectors for swimming pools can supply up to 100% of the heating requirements. Furthermore, these are the simplest of all systems to install.

In prezent sistemele solare de pe piata folosesc tehnologie de varf foarte bine dezvoltata. Sectorul de aplicare cel mai popular este cel al panourlor solare pentru preparare ACM si/sau incalzire in locuinte private, unde se ajunge la economii de energie de la 50 la 80 % pentru ACM si de la 20 la 40% pentru necesarul total de energie la incalzire si preparare ACM.

Today, the solar systems on the market use technology which has reached the peak of its development. The most popular sector of application is solar thermal panels for the production of domestic hot water and/or for heating private homes, where energy savings range from 50 to 80% for DHW production and from 20 to 40% for the total heat demand in heating and DHW applications.

07

21 decembrie - 21 december

θ = 22°

θ = 35°

θ = 46°θ = 58°

θ = 69°

21 iunie - 21 June

21 aprilie/august - 21 april/august

21 martie/septembrie - 21 march/september

21 februarie/octombrie - 21 february/october

θ

altitudinea solara la ora 12

solar altitudeat midday

Unghiul de inclinare al panourilor influenteaza perioada de producere maxima de energie in timpul anului. O inclinare intre 30° si 45° conduce la o producere de energie maxima in tot cursul anului.Inclinare intre 50° si 80° in timpul lunilor de iarna.

The angle of inclination of the panels influences the period of highest energy production during the year.Angle of between 30° - 45°: maximum energyproduction throughout the year.Angle of between 50° - 80°: winter months.

Inclinarea panourilor solareInclination of solar panels

Sola

r rad

iatio

n (W

H/m

2 gla

ss d

ay)

DEC JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

/ Horizontal

Horizontal

South

North

East & West

/ Vertical

08

Distanta minima de amplasare dintre panouri.Minimum distance between panels.

Functionare doar pe perioada de varaOperation summer only

= 30° d = h * 2,0 mt

= 45° d = h * 2,2 mt

= 60° d = h * 2,3 mt

Functionare tot anulOperation annual

= 30° d = h * 2,6 mt

= 45° d = h * 3,2 mt

= 60° d = h * 3,5 mt

Deviatie fata de SudDeviation to South

UmbrireaShading

Unghiul de deviatie al panourilor fata de SUD afecteaza producerea de energie pe parcursul anului si al zilei. Deviatii de la -30° pana la +30° aduc cel mai bun rezultat energetic de-a lungul anului, cu furnizare de energie in miezul zilei. Deviatii peste 30° pana la 90° dau rezultate diminuate de performanta energetica, dar totusi acceptabila pentru instalatie. Deviatii peste 90° nu sunt indicate in folosirea panourilor solare.

The angle of deviation to the SOUTH of the panels affects the energy production during the year and daily utilization times. Deviations of between -30° and +30° give the highest energy production throughout the year, with energy supplied in the middle of the day. Deviations of over 30° and up to 90° produce less energy, but the plants will still have an acceptable performance. Deviations of over 90° are not recommended.

La instalarea panourilor solare se acorda atentie deosebita umbririi!

When installing solar panels, particular attention must be paid to shading!

Incl

inar

ea c

olec

toru

lui

Incl

inat

ion

of s

olar

col

lect

or

Randamentul unui sistem solar / Performance of a solar system

est/east azimut/azimuth ovest/west

09

In acest caz, soarele incalzeste fluidul termic care circula prin panourile solare si ulterior este circulat de pompa sistemului solar in schimbatorul de caldura instalat in rezervorul de apa menajera. In acest fel apa menajera este incalzita direct de la soare. Gradul de acoperire optim anual al cererii de energie pentru incalzirea ACM cu sisteme solare este de 50-80%.

In this case, the sun heats the heat-carrying fl uid circulating in the solar panels which, subsequently, is circulated by the solar pump in the heat exchanger installed in the domestic water tank. In this way, domestic water is heated directly by the sun! The optimal annual coverage of energy requirements for heating domestic hot water with solar systems is around 50% - 80%.

Dimensionare:

Pentru a obtine un grad de acoperire anual al cererii de energie de aprox. 70-85% pentru prepararea ACM, trebuie instalati 1-2 m² de colectori solari si aprox. 70-100 litri de acumulare apa per persoana.

Dimensioning:

To obtain a production of DHW with a solar system, and satisfy 70-85% of the demand we will have to install 1-2 m² of solar collectors and approximately 70-100 litres of water storage system per person.

Instalatii solare pentru incalzirea ACMSolar systems for DHW heating

Cladiri rezidentialeResidential homescomfort ridicathigh comfort

75 lt/persoana75 L/person

comfort mediumedium comfort

50 l/persoana50 L/person

comfort minimlow comfort


masina de spalatwashing machine

20 lt/spalare20 L/wash

Masina de vasedishwasher

20 lt/spalare20 L/wash

Pensiuni si agroturismBoarding houses and holidayfarmsnivel ridicathigh level


nivel mediumedium level


Hotel si restaurantHotel and restaurantscomfort ridicathigh comfort

75 lt/persona75 L/person

comfort mediumedium comfort


comfort minimlow comfort


Deservire bucatarieKitchen water supply

cerinta mediemedium demand

10 lt/masa-persoana10 L/meal-person

CEREREA ZILNICA DE APA CALDA LA 45°C

DAILY HOT WATERREQUIREMENT AT 45°C

Acoperirea solara a cererii de energie / Solar coverage of energy requirement

energia solara kWhSolar energy kWh

Cerinta totala de energie kWhTotal energy requirements kWh

010

Sisteme solare pentru incalzireambientala integrataSolar systems for theintegration of ambient heating

Schimbatoare de caldurain circuitul solarSolar heat exchangers

In acest caz soarele incalzeste fluidul termic care circula in panourile solare si este pompat de catre pompa sistemului solar in schimbatorul de caldura al rezervorului de apa calda - Puffer. Apa calda menajera este incalzita folosind un rezervor combinat de apa calda sau alt rezervor de acumulare ACM. In acest fel, apa calda menajera si sistemul de incalzire central sunt incalzite direct de catre soare.

In this case the sun heats the heat-carrying fl uid circulating in the solar panels, which is pumped by the solar pump into the heat exchanger in a hot water storage tank. The DHW is heated using a combined hot water storage tank or another boiler. In this way, domestic water and central heating system are heated directly by the sun!

Dimensionare:

Gradul optim anual de acoperire a cererii de energie trebuie calculat pentru fiecare instalatie in parte.

Dimensioning:

The optimal annual coverage of the energy requirements must be calculated for each single plant.

In instalatiile de dimensiuni mici si medii cel mai des se folosesc schimbatoare de caldura realizate din tevi spiralate integrate in acumulatoarele de apa calda sau boilere. In acest caz, suprafata exterioara a tevii trebuie sa fie de cel putin 0,5 m2/m2 de suprafata a colectorului. Pentru instalatiile mai mari se calculeaza puterea generata de catre instalatia de colectori solari si in baza acestor calcule se utilizeaza un schimbator de caldura in placi de dimensiuni adecvate.

The heat exchangers most often used in small and medium-size plants consist of spiral pipes in the hot water storage tank or boiler. In this case, the outer surfaces of the pipe must be equal to at least 0.5 m2/m2

the surface area of the solar collector. In bigger plants, the power generated by the collector installation requires the use of heat exchangers with plates of a suitable size, on the basis of project data.

SOLA

R PA

NEL

S

HO

T W

ATER

COLD

WAT

ER

SOLA

R CI

RCU

IT 2

2 X

1 M

M

19M

M A

RMAF

LEX

INSU

LATI

ON

Solar control unit

5 X SOLAR COLLECTORS MOD. P20000

CIRC

ULA

TIO

N

011

Temperatura max. giornaliera del collettore

Acoperirea solara a cererii de energie / Solar coverage of energy requirement

energia solara kWhSolar energy kWh

Cererea totala de energie kWhTotal kWh for energy requirements

Exemplu de instalatie pentru integrarea incalzirii ambientaleExample of plant forintegrating ambient heating

Cererile principale:

• Inclinarea optima a colectorilor intre 50 si 80°

• Sistem de incalzire la temperatura scazuta

• Spatiu disponibil pentru rezervorul de acumulare de dimensiune adecvata

• Casa cu izolatie termica buna (casa ecologica)

Main requirements:

• Optimal angle of collectors 50 - 80°

• Low temperature heating system

• Available space for hot water storage tank of a suitable size

• Insulated home (ecological home)

Rezultate/an ale sistemului solar pentru preparare ACM si integrarea incalziriiResults/year of solar system for the production of hot water and heating integrationRadiatia globala pe panouri / Global irradiation on panels 21,26 MWh 1.437,44 kWh/m2

Energia furnizata de catre panouri / Energy supplied by panels 6,48 MWh 437,87 kWh/m2

Energia furnizata de catre circuitul solar / Energy supplied by solar circuit 5,35 MWh 361,67 kWh/m2

Cererea de energie pentru apa calda / Energy requirements for hot water 3,15 MWh

Energia produsa de catre instalatia solara / Energy produced by solar plant 6,74 MWh

Energia integrata pentru indeplinirea cerintelor Energy integration to meet requirements 5,35 MWh

Radiatia solara totala pe colectori/ Total solar radiation on the collectors 6,78 MWh

Economia de gaz metan / Methane gas savings 842,4 m3

Reducerea de CO2 / CO2 reduction 2.106,25 kg

Gradul de acoperire total al energiei solare pentru preparare ACM si incalzire Total solar coverage for DHW production and heating requirements 44,1%

Randamentul sistemului / Plant performance 25,2%

Date locale/Local dataLocalitate/ Place

Bolzano (IT)

Radiatia anuala globala/ Global annual irradiation

1.329,14 kWh

Longitudine/ Longitude

46,5°

Latitudine/ Latitude

-11,35°

Date apa calda si incalzireWater and heating data

Apa calda/Hot water

Consumul mediu zilnicMean daily consumption 200 l

Temperatura ACMDHW temperature 45°C

Pentru consum la:For consumption of:

Locuinta familialaResidentialhome

Temperatura apei reci: iarna - varaCold water temperature:winter – summer

6°C-10°C

Incalzire/Heating

Casa ecologica clasa B/ Ecological home class B 51 Kwh/m2/a

Temp. min exterioaraMin. outdoor temperature -12°C

Temp. tur/retur incalzireHeating delivery andreturn temperature

30°C/25°C

Componente/Components

Panouri solare/Solar panels

Tip/ Mod. P20000

Cantitate/ Quantity 3

Supraf. bruta m2/ Gross surface area 6,042 m2

Supraf. neta m2/ Net surface area 5,547 m2

Inclinarea acoperisului/ Roof inclination

30°

Azimut/ Azimuth 0°

Boiler bivalent solar/Bivalent solar boiler

Tip/ Mod. E2ss05

Volum/Volume 500 l

Cazan integrat /Integrated boiler

Productie/ Production unit Cazan/ Boiler

Tip/ Type Gaz-in condensareGas-Condensation

Putere nominala./ Nominal output 15 kW

012

Instalatii solare pentru incalzirea apei din piscinaSolar systems for heating water in a swimming pool

In cazul piscinelor folosite in principal vara, se pot folosi panouri termo solare (model OKU) prin care curge direct apa din piscina. In acest fel instalatia este simplificata, reducandu-se numarul de parti componente si apa din piscina este incalzita direct de la soare!

Dimensionare:

Urmatorii factori se iau in considerare la proiectarea instalatiei solare pentru piscina:

• Conductivitatea termica a bazinului spre exterior (sol)

• Conductivitatea termica la suprafata apei spre exterior (aer)

• Evaporarea apei din piscina

Indicat este sa se instaleze de la 50 – 100% m² de colectori solari pentru fiecare m² de piscina.

In the case of swimming pools used mainly in summer, solar thermal panels with the water of the swimming pool running inside can be used (OKU model). This simplifies the plant, reducing also the number of components used.

Dimensioning:

The following factors must be considered when planning a solar thermal plant for a swimming pool:

• the thermal dispersion to the ground through the walls of the swimming pool

• the thermal dispersion through the surface of the water

• the evaporation of the water in the swimming pool.

Exemplu de instalatie / Example of plant

013

Cererea termica pentru incalzirea unei piscine variaza, depinzand de temperatura apei (20 – 27°C), intre 500 si 1500 kWh/an si m² de suprafata a piscinei. Sistemele de incalzire a piscinei cu energie solara ofera avantaje considerabile prin:

• Simultaneitatea cererii de energie termica si a radiatiei solare maxime pe timp de vara;

• temperatura necesara scazuta;

• simplitatea instalatiei;

• nu sunt necesare schimbatoare de caldura sau rezervor de acumulare;

• Recuperarea rapida a investitiei, costuri de functionare si intretinere inferioare celor ce provin de la instalatiile clasice.

The thermal requirements for heating a swimming pool depend on the temperature of the water and can range from 500 - 1500 KWh/year per m2 of swimming pool surface area.

Swimming pool heating systems offer considerable advantages for exploiting solar energy thanks to:

• the simultaneous thermal demand and maximum solar radiation in summer;

• the low temperature required;

• plant simplicity;

• no hot water storage or heat exchangers required;

• fast pay-back times.

Incalzire direct de la soareDirect sun heating

014

Colectori solari art. P20000 cu eficienta ridicata, suprafata 2,0 m² cu cadru de inox - montaj vertical si orizontal.

Structura in forma de rezervor monobloc realizat din tabla de otel inox AISI 304L, cu marginile indoite si sudate. Rama suprafetei de sticla este realizata din otel inox AISI 304L, sudata de margine.Sistem de inchidere inspectabil cu garnitura perimetrala integrata din cauciuc EPDM vulcanizat, rezistenta la schimbari de temperatura si raze UV. Sticla solara securizata prismatica, cu transparenta ridicata si continut scazut de fier.Izolatia panoului si a marginilor este realizata cu vata minerala de calitate, fara formaldehida sau adezivi.Absorbant cu suprafata integral realizata din cupru cu placi inalt selective tratate metalo-ceramic, sudate cu ultrasunete sau laser. Cuplaje de alama conice cu infiletare si autoetansare, pentru racordarea directa a colectorilor si a setului de racordare.Garnituri circulare din silicon termorezistent, stabile mecanic si impermeabile. Colectorul este adecvat pentru montaj pe acoperis sau pe cadru si de asemenea pentru integrare in acoperis. Performante si calitate testate.

colectori solari solar collectors

Seria P20/P20 SeriesColectori plani / flat plate collector

Solar collector P20000 series high efficiency, 2,0 mq surface, stainless steel tank - vertical and horizontal assembly.

Made using top quality components only, they have a AISI 304L stainless steel monobloc tank. The moulding is also made of folded and welded AISI304L stainless steel. The perimeter vulcanized EPDM seals are integrated in the collector and are resistant to temperature changes and U.V. rays. Prismatic solar safety glass - high transparency, low iron content. Tank edges and bottom insulated with quality rock wool, free of formaldehyde and adhesives. Full copper absorber with highly-selective metal-ceramic ultrasonic welded plate. Conical, screw-on and self-retaining brass fittings for direct connection of collectors and fitting set. Circular heat-resistant silicone seals, mechanically stable and watertight. The collector is suitable for assembly on the roof or on a frame and for integration with the roofing. Performance and quality tested.

Pentru montaj si materiale vezi pag. 30 / For assembly and materials see page 30

CaracteristiciInstalare usoara: 4 conectori conici permit instalarea directa a mai multor panouri in paralel.

Durabile si rezistente: Materialul otel inox 304 este rezistent la cei mai agresivi agenti atmosferici si actiuni mecanice exterioare, garantand o durata lunga de functionare.

Eficienta ridicata: panou absorbant inalt selectiv, realizat cu inchidere ermetica pentru o protectie optima a absorbantului si pentru marirea efectului de sera.

Resistenta suprafetei de sticla: Rezistenta la trafic uman si la grindina.

Posibilitati multiple de montaj: peste tigla, integrat (impermeabilizat), pe acoperis de tabla, pe cadru inclinat; sunt posibile si alte solutii personalizate.

FeaturesEasy to install: 4 conical fittings let you connect various collectors in parallel directly

Reliable: AISI 304 stainless steel is resistant to even the most aggressive atmospheric agents and mechanical stress, guaranteeing a long life

High efficiency: highly selective absorber, hermetic seal for best protection of absorber, increasing the greenhouse effect

Strong glass: suitable for foot traffic, hail-proof

A wide range of installation solutions: over-tile, integrated (waterproofing), sheet steel roofing, sloping frame; custom solutions also available

POSIBILITATI DE CONECTARE / CONNECTION OPTIONS

Conectare in paralelParallel connection

max 6 colectorimax 6 collectors


Conectare mixtaMixed connection

in functie de pierderile de presiunebased on pressure drop

Conectare in serieSeries connection



015

Montaj/Assembly:

eficienta ridicatarezervor din otel inoxidabil

high efficiencystainless steel tank

PE ACOPERIS vertical/orizontalkit de fixare, cadru si accesorii

ON ROOF vertical/horizontalfixing kit, frames and accesories

INTEGRAT vertical/orizontalset placi de conectare si accesorii

INTEGRATED vertical/horizontalset of connecting plates and accesories

PE SUPORT vertical/orizontalcadru portant

ON SUPPORT vertical/horizontalframe

Date tehnice/Technical DataSuprafata bruta / Gross surface area 2,01 m2

Suprafata expusa / Exposed surface area 1,828 m2

Suprafata absorbanta neta / Net absorbing surface area 1,824 m2

Volum de lichid / Liquid content 1,38 l

Debit / Flow debit ridicat/debit scazuthigh flow / low flow

Pierderi de sarcina / Load loss 0,90 mbar cu /with 36 l/h

Grosime sticla solara / Solar glass thickness 4 mm

Coeficient de transmisie sticla Glass transmission coefficient 91%

Grosime izolatie termica / Thickness of insulation 55 mm panou/flat, 25 m laterale /sides

Absorbant / Absorber cupru in totalitate / full copper

Tratament absorbant / Absorber treatmentinalt selectiv metalo-ceramic sau nichel-crom / highly selective metal-ceramic or nickel-chrome

Absorbtie / Absorption 95%-96%

Emisii / Emission 5%-8%

Conexiuni / Fittings 4 conice/conical, Ø 22 mm

Presiunea de lucru / Working pressure 6 bar

Presiunea de testare / Test pressure 9 bar

Temperatura maxima / Max temperature 250°C

Greutate / Weight 48 kg (varianta integrat 58 kg / 58 kg if integrated)

Certificare / Certification EN 12975

Garantie / Warranty 12 ani (excluzand sticla) / 12 years (glass excluded)

Modele disponibile/Available ModelsCod/Part n. Dimensiuni exterioare/External dimensions

P20000 (vertical) 2003 x 1005 x 90 mm

P2000Q (orizontal/horizontal) 1005 x 2003 x 90 mm

Coeficienti de eficacitateEfficiency coefficients Total Deschidere/Aperture Absorbant/Absorber

η0 0,737 0,811 0,813

a1 4,02 4,43 4,44

a2 0,0066 0,0073 0,0073

016

Colector solar art. AS3000 cu rezervor de aluminiu - montaj vertical si orizontal.

Realizat cu ultimele sisteme de producere, folosind componente de inalta calitate. Rezervor monobloc din aluminiu de inalta calitate anti-coroziv (AlMg).Rama sticlei din aluminiu vopsit in camp electrostatic gri grafit (RAL 7024) cu colturi din aluminiu turnat.Sistem de inchidere inspectabil cu garnitura perimetrala integrata din cauciuc EPDM vulcanizat, rezistenta la schimbari de temperatura si raze UV. Sticla solara securizata prismatica, cu transparenta ridicata si continut scazut de fier.Izolatia panoului si a marginilor este realizata cu vata minerala de calitate, fara formaldehida sau adezivi.Absorbant cu suprafata integral realizata din cupru cu placi inalt selective tratate metalo-ceramic, sudate cu ultrasunete. Cuplaje de alama conice cu infiletare si autoetansare, pentru racordarea directa a colectorilor si a setului de racordare.Garnituri circulare din silicon termorezistent, stabile mecanic si impermeabile. Colectorul este adecvat pentru montaj pe acoperis sau pe cadru si de asemenea pentru integrare in acoperis. Performante si calitate testate.

Solar collector AS3000 series aluminium tank - vertical and horizontal assembly.

Built with the latest production systems, it is made using top quality components. High quality aluminium corrosion-proof one-piece tank (AlMg). Graphite grey powder-coated aluminium glass moulding (RAL 7024) with die-cast aluminium corners. Locking system designed to open for inspection with integrated perimeter vulcanized EPDM seals, resistant to temperature changes and UV rays. Prismatic solar safety glass with high transparency and low iron content. Tank edges and bottom insulated with quality rock wool, free of formaldehyde and adhesives. Full copper absorber with highly-selective metal-ceramic ultrasonic welded plate. Conical, screw-on and self-retaining brass fittings for direct connection of collectors and fitting set. Circular heat-resistant silicone seals, mechanically stable and watertight. The collector is suitable for assembly on the roof or on a frame and for integration with the roofing. Performance and quality tested.

CaracteristiciDimensiuni mari: suprafata de captare extinsa

Instalare usoara: 4 conectori conici permit instalarea directa a mai multor panouri in paralel.

Durabile si rezistente: cadru si rezervor realizate la presa, concepute pentru a da colectorului rezistenta si dimensiuni reduse.

Eficienta ridicata: panou absorbant inalt selectiv, realizat cu inchidere ermetica pentru o protectie optima a absorbantului si pentru marirea efectului de sera.

Resistenta suprafetei de sticla: Rezistenta la trafic uman si la grindina.

Posibilitati multiple de montaj: peste tigla, integrat (impermeabilizat), pe acoperis de tabla, pe cadru inclinat; sunt posibile si alte solutii personalizate.

Ecodesign: proiectate si fabricate pentru a respecta mediul.

FeaturesLarge dimensions: extensive absorbing surface area

Easy to install: 4 conical fittings let you connect various collectors together directly and quickly

Reliability: press-moulded frame and tank - strong, compact collector

High efficiency: highly selective absorber, hermetic seal for best protection of absorber, increasing the greenhouse effect


A wide range of installation solutions: over-tile, integrated (waterproofing), sheet steel roofing, sloping frame; custom solutions also available

Eco-design: designed and built to respect the environment



Seria AS30/AS30 SeriesColectori plani / flat plate collector


Conectare in paralel





Conectare in serie



017

Montaj/Assembly:

eficienta ridicatarezervor de aluminiu

high efficiencyaluminium tank







Modele disponibile/Available ModelsCod/Part n. Dimensiuni externe/External dimensions

AS3000 (vertical) 2148 x 1299 x 106 mm

AS300Q (orizontal/horizontal) 1299 x 2148 x 106 mm

Date tehnice/Technical DataSuprafata bruta / Gross surface area 2,790 m2

Suprafata expusa / Exposed surface area 2,340 m2

Suprafata absorbanta neta/ Net absorbing surface area 2,251 m2

Volum de lichid / Liquid content 1,6 l


Pierderi de presiune / Load loss 2,11 mbar cu/with 112 l/h

Grosime sticla solara / Solar glass thickness 4 mm

Coeficient de transmisie sticla / Glass transmission coefficient 91%

Grosime izolatie termica / Thickness of insulation 55 mm piano / flat

Absorbant / Absorber cupru-aluminiu / copper-aluminium

Tratament absorbant / Absorber treatment inalt selectiv metalo-ceramic / highly selective metal-ceramic

Absorbtie / Absorption 95%

Emisii / Emission 5%

Conexiuni / Fittings 4 conice / conical, Ø 22 mm

Presiune de lucru / Working pressure 6 bar

Presiune de testare / Test pressure 9 bar


Greutate / Weight 49 kg


Garantie / Warranty 10 ani (excluzand sticla)/10 years (glass excluded)


η0 0,609 0,725 0,755

a1 3,65 4,34 4,52

a2 0,0040 0,0048 0,0050

018

Colector solar art. H2000 cu eficienta ridicata, suprafata 2,0 m² cu cadru de aluminiu - montaj vertical si orizontal. Noul colector solar are o structura din profil de aluminiu de inalta calitate rezistent la coroziune (Al Mg).Sistem de inchidere cu garnitura perimetrala integrata din cauciuc EPDM vulcanizat, rezistenta la schimbari de temperatura si raze UV.Sticla solara securizata antireflex, cu transparenta ridicata si continut scazut de fier.Izolatia panoului este realizata cu vata minerala de calitate, fara formaldehida sau adezivi.Absorbant cu suprafata integrala din aluminiu si strat inalt selectiv de vacuum. Racorduri de compresiune.Colectorul este adecvat pentru montaj pe acoperis sau pe cadru si de asemenea pentru integrare in acoperis. Performante si calitate testate.

Solar collector H2000 Series high efficiency, aluminium tank – vertical and horizontal assembly.

The new solar collector has a high quality corrosion-resistant aluminium profile structure (Al Mg).Locking system with integrated perimeter vulcanized EPDM seal resistant to temperature variations and UV rays.Anti-reflex solar safety glass with high transparency and low iron content.Tank bottom insulated with high quality rock wool containing no formaldehyde and adhesives. Full aluminium absorber with highly-selective vacuum coating. Nose fittings. The collector is suitable for assembly on the roof or on a frame and for integration with the roofing.Performances and quality tested.

CaracteristiciAspect unic, design inteligent

Raport calitate/pret imbatabil

Precizie maxima de fabricare: realizate pe linie de productie robotizata

Concept de montaj inteligent: timp redus de montaj

Multiple posibilitati de montaj: pana la 6 colectori in rand, peste tigla, acoperire plana, incastrat.

FeaturesUnique look, smart design

Unbeatable quality/price ratio

Highest manufacturing accuracy: robotized manufacture lines

Smart assembly: reduced assembly times

Wide range of assembly solutions: up to 6 collectors in a row, over tile, flat roofing, built-in.

Vertical and horizontal assembly.



Seria H2000/H2000 SeriesColectori plani / flat plate collector


Conectare in paralelParallel connection





Conectare in serieSeries connection

in functie de pierderile presiunebased on pressure drop


019

Montaj/Assembly:









Modele disponibile/Available modelsCod/Part no. Dimensiuni externe/External dimensions

H2000 1730 x 1170 x 83 mm

Coeficienti de eficacitateEfficiency coefficients Deschidere/Aperture Absorbant/Absorber

η0 0,814 0,814

a1 4,061 4,061

a2 0,013 0,013

Date tehnice/Technical DataSuprafata bruta / Gross surface area 2,02 (m²)

Suprafata expusa / Exposed surface area 1,84 (m²)

Suprafata neta / Net surface area 1,84 (m²)

Capacitate / Capacity 1,56 (l)

Debit / Flow debit ridicat/debit scazuthigh flow/low flow

Grosime sticla / Glass thickness 3,2 mm


Grosime izolatie termica / Thickness of insulation 40 mm panou/bottom

Absorbant / Absorber Aluminiu cu strat de vacuum inalt selectiv Aluminium with highly-selective vacuum coating

Absorbtie / Absorption 95 %

Emisii / Emission 5 %

Conexiuni / Fittings 4 x 22 mm




Greutate / Weight 35 kg

Certificare / Certification EN 12975 + Keymark

Garantie / Warranty 10 ani (excluzand sticla)/10 years (glass excluded)

020

Colectori solari plani cu randament ridicat si suprafata mare, seria P20G, pentru montaj orizontal.

Structura formata din tuburi de otel inox AISI 304L sudate si autoportante pe sectiune rectangulara 100 x 40 mm si rezervor posterior din otel inox AISI 304L.Rama suprafetei de sticla din otel inox AISI 304L cu colturi sudate.Sistem de inchidere inspectabil cu garnitura perimetrala integrata din cauciuc EPDM vulcanizat, rezistenta la schimbari de temperatura si raze UV. Sticla solara securizata prismatica, cu transparenta ridicata si continut scazut de fier.Izolatia panoului si a marginilor este realizata cu vata minerala de calitate, fara formaldehida sau adezivi.Absorbant cu suprafata integral realizata din cupru cu placi inalt selective tratate metalo-ceramic, sudate cu ultrasunete. Cuplaje de alama conice cu infiletare si autoetansare, pentru racordarea directa a colectorilor si a setului de racordare.Garnituri circulare din silicon termorezistent, stabile mecanic si impermeabile. Colectorul este adecvat pentru montaj pe acoperis sau pe cadru si de asemenea pentru integrare in acoperis. Performante si calitate testate.

P20G-series high efficiency flat solar collector for horizontal assembly with extensive surface area.

Structure consisting of welded and self-supporting AISI 304L stainless steel tubular profiles of 100x40 mm rectangular cross-section and AISI 304L stainless steel back tank.Glass moulding made of AISI 304L stainless steel glass with welded corners. Locking system designed to be opened for inspection with built-in perimeter seal resistant to temperature variations and UV rays made of vulcanized EPDM.Internally prismatic solar safety glass with high transparency and low iron content. Tank edges and bottom insulated with high quality rock wool containing no formaldehyde and adhesives.Full copper absorber with highly-selective metal-ceramic ultrasonic welded plate. Conical screw-on and self-retaining brass fittings for direct connection of collectors and fitting set.Circular heat-resistant silicone seals, mechanically stable and watertight.The collector is suitable for assembly on the roof or on a frame and for integration with the roofing.Performance and quality tested.

Caracteristici

Instalare usoara: 2 conexiuni conice realizabile pe oricare parte

Dimensiuni mari: 6, 8, 10 si 12 m²

Durabile si rezistente: Otel inox 304 si structura tubulara confera rezistenta la cei mai agresivi agenti atmosferici si actiuni mecanice exterioare, garantand o durata de functionare lunga

Eficienta ridicata: panou absorbant inalt selectiv

Resistenta suprafetei de sticla: Rezistenta la trafic uman si la grindina

Posibilitati multiple de montaj: peste tigla, integrat (impermeabilizat), pe acoperis de tabla, pe cadru inclinat; sunt posibile si alte solutii personalizate

Features

Easy to install: 2 conical fittings for any side

Large dimensions: 6, 8, 10 and 12 m2

Reliability and stiffness: AISI 304 stainless steel and the tubular structure can resist to the most aggressive weather agents and mechanical stresses, ensuring a long life.

High efficiency: highly selective absorber


Wide range of installation solutions: integrated (waterproofing), sheet steel roofing, sloping frame; custom solutions also available.



Seria P20G/P20G SeriesColectori modulari cu suprafata mare / large area module collector


Conectare in paralel Conectare mixta


Conectare in serie



021

Montaj/Assembly:Modele disponibile/Available modelsCod/Art. no. Dimensiuni externe/External Dimensions

P20G06 2036 x 3066 x 115 mm

P20G08 2036 x 4078 x 115 mm

P20G10 2036 x 5090 x 115 mm

P20G12 2036 x 6102 x 115 mm

Date tehnice/Technical DataModel P20G06 P20G08 P20G10 P20G12

Suprafata bruta / Gross surface area 6,24 m2 8,30 m2 10,36 m2 12,42 m2

Suprafata expusa / Exposed surface area 5,82 m2 7,76 m2 9,70 m2 11,65 m2

Suprafata neta absorbanta / Net absorbing surface area 5,58 m2 7,45 m2 9,30 m2 11,16 m2

Volum de lichid / Liquid content 3,34 l 4,47 l 5,60 l 6,70 l


Pierderi de presiune / Load loss5,30 mbar cu/with 200 l/h

7,0 mbar cu/with 270 l/h



Grosime sticla solara / Solar glass thickness 4 mm prismatica / prismatic


Grosime izolatie termica / Thickness of insulation 55 mm posterior/bottom, 25 mm laterale/sides

Absorbant / Absorber cupru in intregime / full copper

Tratament absorbant / Absorber treatment

inalt selectiv metalo-ceramic / highly selective metal-ceramic



Conexiuni / Fittings 4 conice / conical Ø 22 mm




Greutate / Weight 175 kg 235 kg 290 kg 350 kg



montaj rapideficienta ridicatarezervor din otel inox

quick assemblyhigh efficiencystainless steel tank

PE ACOPERIS orizontalkit de fixare, cadru si accesorii

ON SHEET STEEL ROOFING horizontalfixing kit, frames and accessories

INTEGRAT orizontalset placi de conectare si accesorii

INTEGRATED horizontalset of connecting plates and accessories

PE SUPORT orizontalcadru portant

ON SUPPORT horizontalload-bearing structure


η0 0,737 0,811 0,813

a1 4,02 4,43 4,44

a2 0,0066 0,0073 0,0073

022

Colectori solari plani cu randament ridicat si suprafata mare, seria AS3A, pentru montaj orizontal.

Structura formata din profile tubulare de aluminiu anticoroziv de inalta calitate, sudate si autoportante pe sectiune rectangulara100 x 40 mm si rezervor posterior de aluminiu.Rama suprafetei de sticla din aluminiu vopsit in camp electrostatic, cu colturi sudate.Sistem de inchidere inspectabil cu garnitura perimetrala integrata din cauciuc EPDM vulcanizat, rezistenta la schimbari de temperatura si raze UV. Sticla solara securizata prismatica, cu transparenta ridicata si continut scazut de fier.Izolatia panoului si a marginilor este realizata cu vata minerala de calitate, fara formaldehida sau adezivi.Absorbant cu suprafata integral realizata din cupru cu placi inalt selective tratate metalo-ceramic, sudate cu ultrasunete. Cuplaje de alama conice cu infiletare si autoetansare, pentru racordarea directa a colectorilor si a setului de racordare.Garnituri circulare din silicon termorezistent, stabile mecanic si impermeabile. Colectorul este adecvat pentru montaj pe acoperis sau pe cadru si de asemenea pentru integrare in acoperis. Rama suprafetei de sticla se poate realiza in diverse culori RAL. Performante si calitate testate.

Caracteristici

Dimensiuni mari: 6, 8, 10 si 12 m²

Durabile si rezistente: structura tubulara de aluminiu realizata pentru a rezista celor mai agresivi agenti atmosferici si actiuni mecanice exterioare, garantand o durata lunga de functionare

Eficienta ridicata: panou absorbant inalt selectiv



Features

Large dimensions: 6, 8, 10 and 12 m2

Reliability and stiffness: the aluminium tubular structure can resist to the most aggressive weather agents and mechanical stresses, ensuring a long life.

High efficiency: highly selective absorber


Wide range of installation solutions: integrated (waterproofing), sheet steel roofing, sloping frame; custom solutions also available.



Seria AS3A/AS3A SeriesColectori modulari cu suprafata mare / large area module collector

AS3A-series high efficiency flat solar collector for horizontal assembly with extensive surface area.

Structure consisting of welded and self-supporting high quality corrosion-resistant aluminium tubular profiles of 100x40 mm rectangular cross-section and aluminium back tank.Glass moulding made of powder-coated aluminium with welded corners.Locking system designed to be opened for inspection with built-in perimeter vulcanized EPDM seal resistant to temperature variations and UV rays.Internally prismatic solar safety glass with high transparency and low iron content. Tank edges and bottom insulated with high quality rock wool containing no formaldehyde and adhesives.Full copper absorber with highly-selective metal-ceramic ultrasonic welded plate. Conical screw-on and self-retaining brass fittings for direct connection of collectors and fitting set.Circular heat-resistant silicone seals, mechanically stable and watertight.The collector is suitable for assembly on the roof or on a frame and for integration with the roofing.Corners of feawer in different RAL colours.Performance and quality tested.


Conectare in paralel Conectare mixta


Conectare in serie



023

Montaj/Assembly:

eficienta ridicata rezervor de aluminiu





INTEGRATED horizontalset of connecting plates and accessories




AS3A06 2036 x 3066 x 115 mm

AS3A08 2036 x 4078 x 115 mm

AS3A10 2036 x 5090 x 115 mm

AS3A12 2036 x 6102 x 115 mm

Date tehnice/Technical Data Model AS3A06 AS3A08 AS3A10 AS3A12

Suprafata bruta / Gross surface area 6,24 m2 8,30 m2 10,36 m2 12,42 m2

Suprafata expusa / Exposed surface area 5,82 m2 7,76 m2 9,70 m2 11,65 m2

Suprafata neta absorbanta / Net absorbing surface area 5,58 m2 7,45 m2 9,30 m2 11,16 m2

Volum de lichid / Liquid content 3,34 l 4,47 l 5,60 l 6,70 l


Pierderi de presiune / Load loss5,30 mbar cu/with 200 l/h




Grosime sticla solara / Solar glass thickness 4 mm prismatica / 4 mm prismatic


Grosime izolatie termica / Thickness of insulation

55 mm panou posterior, 25 mm laterale / 55 mm bottom, 25 mm sides


Tratament absorbant / Absorber treatment inalt selectiv metalo-ceramic / highly selective metal-ceramic


Emisie / Emission 5%

Conexiuni / Fittings 4 conice / conical Ø 22 mm




Greutate / Weight 132 kg 175 kg 220 kg 265 kg



η0 0,737 0,811 0,813

a1 4,02 4,43 4,44

a2 0,0066 0,0073 0,0073

024

ASB series – high efficiency flat solar collector for horizontal assembly with extensive surface area.

The ASB-series collectors with extensive surface area are available in standard dimensions 5 m2 and 10 m2. The absorber’s special design and high performances make the collectors ideal for large solar thermal systems. The fixing system specially designed for quick assembly by means of a crane and easy connection considerably reduce assembly costs.

Excellent performance when at rest and empty, thanks to the meander absorber specially dimensioned for large systems.Collector with aluminium frame ensuring high stability in the long term and meeting all demanded static requirements.

Colector solar plan cu randament ridicat si suprafata mare, seria ASB pentru montaj orizontal.

Colectorii cu suprafata mare din seria ASB sunt disponibili in dimensiuni standard de 5 m² si 10 m². Datorita designului special si performantelor ridicate ale absorbantului, acesti colectori sunt conceputi pentru instalatii termo-solare mari. Sistemul de fixare optimizat pentru montaj rapid cu macara si conectare rapida reduce considerabil costurile de montaj ale instalatiei.

Performante excelente la repaus si golire, datorita absorbantului cu profil serpuit .Colector cu rama de aluminiu ce asigura stabilitate ridicata pe termen lung, indeplinind toate cererile statice necesare.

Caracteristici

Posibilitate de legare in paralel sau in serie pana la 10 colectori cu pierderi de presiune minime (Debit scazut / Tichelmann)

Montaj rapid al colectorului datorita suportilor triunghiulari cu unghi de inclinare optimizat si conectare rapida a colectorului

Raport calitate pret excelent datorita absorbantului de aluminiu cu strat inalt selectiv si timp de montaj redus prin folosirea macaralei.

Intretinere simpla: suprafata de sticla si modulele pot fi inlocuite separat

Features

Connection of up to 10 collectors in parallel or in series with minimum load loss (Low Flow/Tichelmann).

Quick assembly of the collector thanks to the triangular supports with maximized tilt angle and easy connection of the same.

Excellent quality/price ratio guaranteed by the aluminium absorber with highly selective coating and reduced assembly time and use of crane during installation.

Easy maintenance: glass and modules can be replaced separately.



Seria ASB/ASB SeriesColectori modulari cu suprafata mare / large area module collector


Conectare in paralel



Conectare mixta


Conectare in serie



025

Montaj/Assembly:




ASB050 2441 x 2064 x 114 mm

ASB100 4867 x 2064 x 114 mm

Date tehnice/Technical DataASB050 ASB100

Suprafata bruta / Gross surface area 5,04 m² 10,05 m²

Suprafata expusa / Exposed surface area 4,70 m² 9,43 m²

Suprafata absorbanta neta / Net absorbing surface area 4,59 m² 9,17 m²

Capacitate / Capacity 4,5 l 9 l

Debit / Flow debit ridicat/debit scazut high flow/low flow

Grosime sticla / Glass thickness 3,2 mm


Grosime izolatie termica / Thickness of insulation

55 mm panou posterior / 25 mm laterale55 mm bottom / 25 mm lateral

Absorbant / Absorber Aluminiu / Aluminium



Conexiuni / Fittings 4x 1-1/4” AG




Greutate / Weight 95 kg 170 kg








INTEGRATED horizontal set of connecting plates and accesories

Coeficienti de eficacitateEfficiency coefficients Deschidere/Aperture Absorbant/Absorber

η0 0,789 0,804

a1 3,834 3,908

a2 0,011 0,011

026

Colector solar plan cu randament ridicat, suprafata mare si montaj personalizat.

Structura formata din profile tubulare si rezervor de inox sau aluminiu.Sistem de inchidere inspectabil cu garnitura perimetrala integrata din cauciuc EPDM vulcanizat, rezistenta la schimbari de temperatura si raze UV. Sticla solara securizata prismatica, cu transparenta ridicata si continut scazut de fier.Izolatia panoului si a marginilor este realizata cu vata minerala de calitate, fara formaldehida sau adezivi.Absorbant cu suprafata integral realizata din cupru cu placi inalt selective tratate metalo-ceramic sau nichel-crom, sudate cu ultrasunete sau Eldor-Plasma. Cuplaje de alama conice cu infiletare si autoetansare, pentru racordarea directa a colectorilor si a setului de racordare.Garnituri circulare din silicon termorezistent, stabile mecanic si impermeabile. Colectorul este adecvat pentru montaj pe acoperis sau pe cadru si de asemenea pentru integrare in acoperis. Rama suprafetei de sticla se poate realiza in diverse culori RAL. Performante si calitate testate.

Solar collector item, high efficiency, large surface area, for custom assembly.

Fiorini produces a range of custom solar collectors that integrate perfectly also in the most sophisticated architectural solutions. With the custom AS3AMO Fiorini solar collector, you can obtain roofing coefficients that would be impossible with standard collectors. Furthermore, you can realise installations that are perfectly integrated in the structure to emphasise the architectural characteristics of the roofing where the system is installed. The materials used are excellent quality. The frame and tank are made of aluminium plate, the removable moulding is made of painted aluminium (RAL 8019). Prismatic solar safety glass - high transparency, low iron content. Tank edges and bottom insulated with quality rock wool, free of formaldehyde and adhesives. Full copper absorber with highly-selective metal-ceramic or nickel-chrome ultrasonic or Eldor-Plasma welded plate. Conical, screw-on and self-retaining brass fittings for direct connection of collectors and fitting set. Circular heat-resistant silicone seals, mechanically stable and watertight. The collector is suitable for assembly on the roof or on a frame and for integration with the roofing. Corners of feawer in different RAL colours.

Caracteristici

Integrare arhitectonica: colectorii personalizati permit realizarea unui acoperis in totalitate solar

Instalare usoara: cele doua racorduri conice se pot amplasa pe oricare latura

Durabil si rezistent: structura tubulara de aluminiu realizata pentru a rezista celor mai agresivi agenti atmosferici si actiuni mecanice exterioare, garantand o durata lunga de functionare

Eficienta ridicata: absorbant inalt selectiv prezent pe toata suprafata utila a colectorului



Set racorduri: inclus

Features

Architectural integration: custom collector, lets you install a full solar roof

Easy to install: with just 1 collector you can install a large surface area

Reliable: tubular aluminium construction resistant to atmospheric agents and mechanical stress, guaranteeing long life

High efficiency: highly selective absorption over the entire useful surface area of the collector


A wide range of installation solutions: integrated (waterproofing), sheet steel roofing, sloping frame; custom solutions also available

Set of fittings: included



Seria AS3AM0-P20GM0/AS3AM0-P20GM0 SeriesColectori modulari personalizati / custom module collector

027

Montaj/Assembly:

eficienta ridicatarezervor de inox sau aluminiu

high efficiencystainless steel or aluminium tank

PE ACOPERIS kit de fixare, cadru si accesorii

ON SHEET STEEL ROOFfixing kit, frames and accesories

INTEGRAT set placi de conectare si accesorii

INTEGRATEDsheet steel fittings and accessories set

PE SUPORT cadru portant

ON SUPPORT frame

Modele disponibile/Available modelsCod/Part n. Dimensiuni externe/External dimensions

AS3AM0 personalizate / custom

P20GM0 personalizate / custom

Date tehnice/Technical DataSuprafata bruta / Gross surface area personalizata / made-to-measure

Suprafata expusa / Exposed surface area personalizata / made-to-measureSuprafata absorbanta neta/ Net absorbing surface area personalizata / made-to-measure

Volum de lichid / Liquid content

0,6 l/m² (suprafata neta / net surface area < 25m²)1,2 l/m² (suprafata neta / net surface area ≥ 25m²)

Debit / Flow debit ridicat/debit scazut high flow / low flow

Pierderi de presiune / Load loss in functie de colectorul solar / depending on solar collector

Grosime sticla / Solar glass thickness 4 mm prismatica / prismaticCoeficient de transmisie sticla / Glass transmission coefficient 91%

Grosime izolatie termica / Thickness of insulation 55 mm panou / flat, 25 mm laterale / lateral


Tratament absorbant / Absorber treatmentinalt selectiv metal-ceramic sau nichel-cromhighly selective metal-ceramic or nickel-chrome

Absorbtie / Absorption 95% - 96%

Emisii / Emission 5% - 8%

Conexiuni/ Fittings

variabile, Ø 22 mm (suprafata neta/ net surface area < 25m²)Ø 28 - 52 mm (suprafata neta/ net surface area ≥ 25m²)




Greutate / Weight 23,5 kg/m²


Garantie / Warranty 10 ani (excluzand sticla)/ 10 years (glass excluded)

PE FATADA vertical/orizontalkit de fixare, cadre si accesorii

ON FACADE vertical/horizontalfixing kit, frames and accesories

INTEGRAT IN FATADAvertical/orizontalset placi de conectare si racorduri

INTEGRATED IN FACADEvertical/horizontalset of connecting plates and accesories


η0 0,737 0,811 0,813

a1 4,02 4,43 4,44

a2 0,0066 0,0073 0,0073

028

Pentru incalzirea apei din piscina

Colector din HDPE certificat TÜV, rezistent la trafic pietonal, la inghet si agenti chimici, impermeabil si anticoroziv, prin care circula direct apa din piscina, incalzindu-se prin actiunea directa a soarelui si a atmosferei, cu pierderi de presiune minime la debit mare si eficienta ridicata (pana la 85%). Se poate asambla atat pe lungime cat si pe latime. Conectarea unei singure serii de panouri folosind metoda Tichelmann(aceleasi tevi pentru fiecare serie), cu maxim opt panouri absorbante in serie.Performante si calitate testate.

For heating swimming pool

This TÜV certified HDPE collector has the water of the swimming pool running directly inside, heated by the combined action of the sun and atmospheric heat. The particular design of the Fiorini OKU collector allows a high flow with low pressure loss. Furthermore, the OKU collector is resistant to ice, suitable for foot traffic and resistant to atmospheric agents. It can be assembled both lengthways and widthways.Connection of the single series of absorbers using the Tichelmann method (same pipes for each series), with no more than eight absorbers in sequence.Tested performance and quality.

panouri absorbantesolar absorbers

Seria OKU/OKU Series


Mod. OKU001

Mod. OKU002

Mod. OKU000

Descriere si modele disponibile/Description and available modelsCod/Part n. Descriere/Description Dimensiuni/ Dimensions

OKU000 Panou absorbant pentru piscine de 1,08 m² cu teava colectoare integrata1,08 m² absorber for swimming pool with integrated collect pipe 1320 x 820 mm

OKU001 Panou absorbant pentru piscine de 1,05 m² cu racorduri integrate1,05 m² absorber for swimming pool with integrated connections 1280 x 820 mm

OKU002 Panou absorbant pentru piscine de 1,12 m² cu 2 tevi colectoare integrate1,12 m² absorber for swimming pool with 2 integrated collection pipes 1360 x 820 mm

029

Montaj/Assembly:

PE ACOPERIS kit de fixare, cadru si accesorii

PE SUPORT cadru portant

ON ROOFfixing kit, frames and accesories

ON SUPPORT frame

Tabel dimensionare in functie de suprafata piscineiSizing table according to the pool surfaceUnghi de inclinareAngle of inclination

Directia de inclinare Inclination direction

E SE S SO O

Procent % de suprafata absorbanta in functie de

suprafata piscinei

Percentage area of the absorbent than the surface

of the pool

90° 90 80 70 75 85

60° 80 65 55 60 70

45° 70 60 50 55 65

30° 60 55 45 50 55

15° 55 50 50 50 55

0° 50 50 50 50 50

Date tehnice/Technical data

Structura / Structure

Panou absorbant cu colector integrat Ø 40 mm si 2 suporti pentru racord Ø 25 mm / Absorber with integrated Ø 40 mm collector and 2 supports for the Ø 25 mm fitting

Dimensiuni / Dimensions 1320 x 820 x 16 mm

Capacitate lichid / Liquid capacity 6 l/m²

Pierderi de presiune / Load loss 0,003 bar la/on 200lt/h/m²

Absorbtie / Absorption pana la / up to 85%

Presiune maxima de functionare Max. working pressure 1,2 bar la/at 40° C

Presiune de testare / Test pressure 4,5 bar

Unitate de calcul / Calculation unit 0,5 - 0,6 Kwh/m² (randament energetic/h / energy yield/h)

Pierderi minime de presiune / Minimum load loss aprox 0,003 bar la/at 200 l/h/ m2

Rezistenta la temperatura/ Temperature resistance

rezistent la temperaturi de la / resistant to temperatures from -50°C pana la/to +115°C

Greutate / Weight 6 kg/m2

Certificare / Certification EN 12975 + TÜV

Garantie / Warranty 5 ani / years

030

Posibilitati multiple de instalareToate modelele de colectori solari sunt disponibile in mai multe versiuni de instalare, fixare si materiale. In functie de caracteristicile functionale si de tipul suportului (acoperis plan, acoperis inclinat cu tigle, cu tabla etc) se poate alege dintr-o gama larga de solutii pentru a asigura rezistenta structurala maxima a sistemului si eficienta schimbului de caldura a colectorului. Solutiile personalizate au ca obiectiv imbinarea armonioasa a sistemului solar cu arhitectura cladirii pentru a minimiza impactul vizual si obstructionarea elementelor structurale.

Wide range of installation solutions All models of the collector are available in several versions of installation, fixing and materials. Depending on the functional characteristics and the type of ground (flat roof, pitched roof with tile, on sheet, etc.) it’s possible to choose from a wide range of solutions to ensure maximum structural strength of the system and the heat exchange efficiency to the collector. Custom solutions are intended to match the solar system with the rest of the architecture to minimize the visual impact and structural obstructions.

Montaj si materialeAssembly and Materials

Montaj/Assembly Pe acoperis/On roof Integrat/Integrated Pe suport/On support

ModelModels

Pe acoperis de tigla Fixing on tiled roof

Pe acoperis de tabla Fixing on sheet steel

roof

Foaie de otel inox Stainless steel

sheet

Tabla zincata TDM

Galvanized steel sheet RAL

8019

Structura inox Stainless steel

structure

Structura otel zincat

Galvanized steel structure

Structura aluminiu

Aluminum structure

Serie P20 • • • • • • •

Serie AS30 • • • • • •

H2000 • • • • • •

P20G • • • • • •

AS3A • • • • • •

ASB • • • •

AS3AM0 • • • • • •

P20GM0 • • • • • •

OKU • • • • •

Tabel de compatibilitate Compatibility chart

031

Montaj/Assembly

PE ACOPERIS vertical/orizontalkit de fixare cadru si accesorii


Pe tigla / On tiles

Sistem de fixare a colectorului solar pe acoperis inclinat cu tigla prin cadre si carlige rezistente. / Fixing system for the solar collector on tiled pitched roof by resistant hooks and frames.

Pe tabla / On sheet

Sistem de fixare a colectorului solar pe acoperis inclinat de tabla, cu structuri rezistente de aluminiu si cleme de inox formate si sudate./ System for fixing the solar collector on pitched sheet roof, with resistant aluminium structures and shaped welded stainless steel clamps.

INTEGRAT vertical/orizontalset de placi conectoare si accesorii


Placa pentru montaj integrat, impermeabila la ploaie si zapada, cu caneluri si forma adecvata pentru un racord perfect intre colector si tigle.

Plate for integrated mounting, rain and snow-proof, grooved and shaped for a perfect match between collector and tiles.

PE SUPORT vertical/orizontalstructura portanta


Structura portanta din profile rectangulare pentru montajul colectorului in unghi de 30°/45°/60° fata de baza. Potrivit pentru acoperisuri plane sau inclinate sau pentru sol.

Supporting structure for mounting the solar collector in 30°/45°/60° from the base. Suitable with flat and pitched roof.

Accesorii disponibile/Available accessoriesProtectie de zapada / Snow barrier

Deflectoare de ploaie / Rain deflectors

Greutati de ciment ranforsate pentru balastul structurilor portante / Ballasting reinforced concrete weights for structures

Exemple de montaj / Mounting examples

30°45°60°

30°45°60°

032

controlere solare solar regulators

REGA01

Controler electronic pentru programarea unei temperaturi diferentiale de la 2 la 16 C°.Carcasa de plastic si design modern.

Electronic regulator for programming a differential temperature from 2 to 16° C.Modern plastic design.

Modele disponibile/Models availableCod/Part n. Descriere/Description

REGA01 Controler diferential pentru 1 sursa de caldura + 1 acumulator + 2 sondeDifferential regulator for 1 heat source + 1 water storage + 2 probes

1

2

1

CaracteristiciAfisaj: 1 Indicator luminos de control

Intrari: 2 sonde de temperatura PT1000 (incluse in livrare)

Iesire: 1 releu standard (contact de comutare) max. 4A

Alimentare: 230V

Protectie: IP20

Instructiuni de utilizare: in germana/italiana

FunctionsDisplay: 1 check luminous indicator

Inputs: 2 x PT1000 temperature probes (included in supply)

Output: 1 standard relay (switching contact) max 4A

Voltage: 230V

Protection: IP20

Instructions: in german/Italian

033

controlere solaresolar regulators

REGTD1


REGTD1 Controler diferential pentru 1 sursa de caldura + 1 acumulator + 3 sondeDifferential regulator for 1 heat source + 1 water storage + 3 probes

Unitatea de control diferential REGTD1 permite controlul eficient al sistemului solar sau al instalatiei de incalzire.Unitatea este practica si usor de utilizat, cu un meniu intuitiv. Unitatea de control are explicatii pentru setari si valori masurate, indicatii si simboluri de ajutor. Se poate utiliza ca unitate de control diferential pentru variante diferite ale instalatiei.

The REGTD1 differential control unit allows efficient control of the solar or heating plant.The control unit is practical and simple to use, with an easy-to-understand menu.The control unit menu has keywords for the settings and values measured, as well as help messages and graphics.The REG TD1 can be used as a differential control unit for various plant setups.

Alte elemente disponibile/Other available elementsSonde temperatura PT1000, sonde imersate, protectie cu impamantare/PT1000 temperature probes, immersed probes, earth protection

Alte functii pentru placi de circuite suplimentare/Other functions for supplementary circuit boards

11

2

1

2

2

3

11

2

1

2

2

3

CaracteristiciDescrierea graficelor si afisarea mesajelor pe ecranControl simplu al valorilor curente masurateAnaliza si monitorizarea sistemului cu grafice statice etc.Meniu amplu de setari cu instructiuniBlocarea meniului ce poate fi activata pentru a preveni modificarileFunctie de resetare pentru valorile anterioare sau ale producatoruluiAsistenta la pornire1x iesire releu viteza variabila1x iesire releu standard3x intrari pentru sonda PT1000Bilant energetic, temperatura etc.Functie antilegionellaContor al orelor de functionarePrezentare graficaMesaje de eroareFunctie antiblocaj, anti-inghet si protectie solaraRacireFunctie mod economicTermostat cu temporizareFunctie mod PartyTmin pe sonda 3Data si oraAfisaj rapid al valorilor de servicePosibilitatea de alegere a diverse limbi de interfataInstructiuni de montaj si punere in functiune in italiana si germana3 sonde temperatura PT1000

FunctionsDescription of graphics and messages on displaySimple control of the current values measuredAnalysis and monitoring of the system with statistical graphics, etc.Generous settings menu with instructionsMenu block that can be activated to prevent modificationsReset function for previous values or manufacturer’s settingsStart-up assistant1 x variable speed relay output1 x standard relay output3 x PT1000 probe inputsEnergy balance, temperature, etc.Antilegionella functionOperating hours counter Graphic overviewError messagesAntiblocking, anti-icing and solarprotection functionCoolingEconomy functionTimed thermostatParty functionTmin on probe 3Date and timeFast display of service valuesPossibility of selecting various interface languagesInstallation and start-up instructions in Italian and German3 PT1000 temperature probes

034

controlere solare solar regulators

REGTD2

Unitatea de control diferential REGTD2 permite un control eficient al functionarii instalatiei solare sau a celei de incalzire. Unitatea este practica si usor de folosit, cu un meniu intuitiv. Unitatea de control are explicatii pentru setari si valori masurate, indicatii si simboluri de ajutor. REGTD2 se poate utiliza ca unitate de control diferential pentru variante diferite ale instalatiei.

The REGTD2 differential control unit allows effi cient control of the solar or heating plant. The control unit is practical and simple to use, with an easy-to-understand menu. The control unit menu has keywords for the settings and values measured, as well as help messages and graphics.The REGTD2 can be used as a differential control unit for various plant setups.


REGTD2 Controler diferential cu diverse sisteme pre-setate + 3 sondeDifferential regulator with various pre-set systems + 3 probes

Alte elemente disponibile/Other available elementsSonde temperatura PT1000, sonde imersate, protectie cu impamantare/PT1000 temperature probes, immersed probes, earth protection

Alte functii pentru placi de circuite suplimentare/Other functions for supplementary circuit boards

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3

13 14(ΔT centralina)

ΔT

15(2xΔT centralina)

2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

21

2

3

11

2

31

2

3

41

2 3

51

2

3

61

2

3

71

2

38

1

2

39

1

32

101

32

111

2 3

121

23

1

2 3


ΔT


2xΔT

CaracteristiciDescrierea graficelor si afisarea mesajelor pe ecranControl simplu al valorilor curente masurateAnaliza si monitorizarea sistemului cu grafice statice etc.Meniu amplu de setari cu instructiuniBlocarea meniului ce poate fi activata pentru a preveni modificarileFunctie de resetare pentru valorile anterioare sau ale producatoruluiAsistenta la pornire1x iesire releu viteza variabila1x iesire releu standard3x intrari pentru sonda PT1000Bilant energetic, temperatura etc.Functie antilegionellaContor al orelor de functionarePrezentare graficaMesaje de eroareFunctie antiblocaj, anti-inghet si protectie solaraRacireData si oraAfisaj rapid al valorilor de servicePosibilitatea de alegere a diverse limbi de interfataInstructiuni de montaj si punere in functiune in italiana si germana3 sonde temperatura PT1000

FunctionsDescription of graphics and messages on displaySimple control of the current values measuredAnalysis and monitoring of the system with statistical graphics, etc.Generous settings menu with instructionsMenu block that can be activated to prevent modificationsReset function for previous values or manufacturer’s settingsStart-up assistant1 x variable speed relay output1 x standard relay output3 x PT1000 probe inputsEnergy balance, temperature, etc.Antilegionella functionOperating hours counterGraphic overviewError messagesAntiblocking, anti-icing and solar protection functionCoolingDate and timeFast display of service valuesPossibility of selecting various interface languagesInstallation and start-up instructions in Italian and German3 PT1000 temperature probes

035

controlere solaresolar regulators

REGC05/I5

Controler solar pentru instalatii complexe, cu afisaj LCD cu meniu multilingvistic, 7 sisteme de baza variabile, 5 relee standard, 4 relee cu semiconductori penru reglarea vitezei, doi senzori de caldura, optiuni si functii integrabile, corelarea libera a temperaturii diferentiale si a functionarii termostatului. Interfete VBus si RS232. Carcasa de plastic si design modern.

Solar regulator also for complex plants, with multilanguage menu LCD, 7 variable basic systems, 5 standard relays, 4 semiconductor relays for speed adjustment, two heat meters, integrated options and functions, free correlation of differential temperature and thermostat function.VBus and RS232 interfaces. Modern plastic design.

Modele disponibile/Models availableCod/Part n. Descriere/Description Instructiuni de utilizare/Use instructions

REGC05

Controler diferential cu diverse sisteme presetate + 6 sonde/Differential regulator with variouspre-set systems + 6 probes

in germana / german

REGCI5

Controler diferential cu diverse sisteme presetate + 6 sonde/Differential regulator with variouspre-set systems + 6 probes

in italiana / italian

CaracteristiciAfisaj: cu LCD luminat clar cu 4 randuri

Comanda: prin intermediul a 3 taste de apasare pe fata unitatii

Intrari: 15 sonde pentru temperatura PT1000

Iesiri: 5 relee standard, 4 relee cu semiconductori pentru reglarea vitezei

Interfata: VBus, RS232

Alimentare: 230V

Protectie IP22

FunctionsDisplay Clearly lit LCD with 4 lines

Commands with three pressure keys on front

Inputs 15 PT 1000 temperature probes

Outputs 5 standard relays, 4 semiconductor relays for speed adjustment

Interface VBus, RS232

Voltage 230V

Protection IP22

036

grupuri de pompare pump units

FST256

Grup de pompare solar cu doua tevi (180 mm) alcatuit din:

RETUR:• Pompa: termo solara WILO ST 25/6• Debitmetru/controler de la 2 la 12 l/min. cu robineti de umplere si golire instalatie• Robinet cu sfera si flanse - 3 cai DN20 cu ventil anti-retur 10 mbar (ventilul anti-retur se poate ocoli rotind manerul la 45°) prevazut cu suport pentru termometru (termometru cu inel albastru; 0°C-120°C)• Grup de siguranta 6 bar cu manometru Ø 63 mm 0-10 bar cu racord ¾” pentru vas de expansiune

TUR:• Robinet cu sfera si flanse DN20 cu ventil anti-retur 10 mbar (ventilul anti-retur se poate ocoli rotind manerul la 45°) prevazut cu suport pentru termometru (termometru cu inel rosu; 0°C-120°C)• Aerisitor cu conexiune 22 mm prin compresie sau 1” tata

ALTE CARACTERISTICI:• Carcasa de izolare EPP (Dimensiuni: 250x380x190 mm) cu set de fixare pe perete• PN 10• Temperatura maxima de functionare 120°C (perioade scurte: 160°C pentru 20 sec.)• Conexiuni externe: 22 mm prin compresie sau 1” tata

The two-pipe solar station (180 mm) consists of the following components:

RETURN:• WILO ST 25/6 solar thermal pump.• Flow meter/regulator (2 - 12 L/min.) with plant filling and drain valves.• Flanged 3-way DN20 ball valve with 10 mbar non-return valve (the non-return valve can be bypassed by turning the handle 45°) with a thermometer handle (thermometer with blue ring; 0°C-120°C).• 6 bar safety unit with ø 63 mm 0-10 bar manometer - ¾” connection for expansion tank.

DELIVERY:• Flanged DN20 ball valve with 10 mbar non-return valve (the non-return valve can be bypassed by turning the handle 45°) with a thermometer handle (thermometer with red ring; 0°C-120°C).• Deaerator with 22 mm compression connection or 1” male connection.

OTHER FEATURES:• EPP insulation box (dimensions: 250x380x190 mm) with wall mount set.• Nominal pressure: 10 bar• Continuous temperature: 120°C (brief period: 160°C for 20 sec.).• External connections: 22 mm compression connection and 1” male connection.

Descriere/Description

Cod/Part n.


Distanta interax/ Centre

distance

FST256

Statie solara cu doua tevi si pompa Wilo ST25/6Two-pipe solar station with Wilo 25/6 pump

180 mm

[m]6.4

65.65.24.84.4

43.63.22.82.4

21.61.20.80.4 max

inaltime de pompare

eco

[kW]0.105

0.10.0950.09

0.0850.08

0.0750.07

0.0650.06

0.0550.05

0.0450.04

0.0350.03

0.0250.02

0.0150.01

0.005

Q[m3/h]

putere absorbita P1

0 0.4 0.8 1.2 1.6 2 2.4 2.8 3.2 3.6 4

max

eco

037

Grup de pompare solar cu doua tevi (180 mm) alcatuit din:

RETUR:• Pompa: termo solara WILO ST 25/7• Debitmetru/controler de la 8 la 28 l/min. cu robineti de umplere si golire instalatie• Robinet cu sfera si flanse -3 cai DN20 cu ventil anti-retur 10 mbar (ventilul anti-retur se poate ocoli rotind manerul la 45°) prevazut cu suport pentru termometru (termometru cu inel albastru; 0°C-120°C)• Grup de siguranta 6 bar cu manometru Ø 63 mm 0-10 bar cu racord ¾” pentru vasul de expansiune

TUR:• Robinet cu sfera si flanse DN20 cu ventil anti-retur 10 mbar (ventilul anti-retur se poate ocoli rotind manerul la 45°) prevazut cu suport pentru termometru (termometru cu inel rosu; 0°C-120°C)• Aerisitor cu conexiune 22 mm prin compresie sau 1” tata

ALTE CARACTERISTICI:• Carcasa de izolare EPP (Dimensiuni: 250x380x190 mm) cu set de fixare pe perete• PN 10

• Temperatura maxima de functionare 120°C (perioade scurte: 160°C pentru 20 sec.)• Conexiuni externe: 22 mm prin compresie sau 1” tata


RETURN:• WILO ST 25/7 solar thermal pump.• Flow meter/regulator (8 - 28 L/min.) with plant filling and drain valves.• Flanged 3-way DN20 ball valve with 10 mbar non-return valve (the non-return valve can be bypassed by turning the handle 45°) with a thermometer handle (thermometer with blue ring; 0°C-120°C).• 6 bar safety unit with ø 63 mm 0-10 bar manometer - ¾” connection for expansion tank.

DELIVERY:• Flanged DN20 ball valve with 10 mbar non-return valve (the non-return valve can be bypassed by turning the handle 45°) with a thermometer handle (thermometer with red ring; 0°C-120°C).• Deaerator with 22 mm compression connection or 1” male connection.

OTHER FEATURES:• EPP insulation box (dimensions: 250x380x190 mm) with wall mount set.• Nominal pressure: 10 bar• Max. working temperature: 120°C (brief period: 160°C for 20 sec.).• External connections: 22 mm compression connection and 1” male connection.

grupuri de pomparepomp units

FST257


Cod/Part n.


Interax/ Centre

distance

FST257

Statie solara cu doua tevi si pompa Wilo ST25/7Two-pipe solar station with Wilo 25/7 pump

180 mm

[m]6.86.4

65.65.24.84.4

43.63.22.82.4

21.61.20.80.4

max

inaltime de pompare

eco

[kW]0.11

0.1

0.09

0.08

0.07

0.06

0.05

0.04

0.03

0.02

0.01

Q[m3/h]

putere absorbita P1

0 0.4 0.8 1.2 1.6 2 2.4 2.8 3.2 3.6 4

max

eco

038

Descriere/DescriptionCod/Part n. Descriere/Description

SST213 Statie solara cu doua tevi si pompa Wilo Top S 25/13, 6 barTwo-pipe solar station with Wilo Top S 25/13 pump , 6 bar

Grup pompare solar cu doua tevi alcatuit din:

RETUR:• Pompa termo solara WILO TOP S 25/13 EM premontata.• Robinet cu sfera si flanse - 3 cai DN25 cu ventil anti-retur 200 mmCA (ventilul anti-retur se poate ocoli usor) prevazut cu suport pentru termometru (termometru cu inel albastru; 0°C-160°C).• Grup de siguranta 6 bar cu manometru 0-6 bar cu racord de ¾” FM pentru vasul de expansiune.

TUR:• Robinet cu sfera si flanse DN25 cu ventil anti-retur 200 mmCA (ventilul anti-retur se poate ocoli usor) prevazut cu suport pentru termometru (termometru cu inel rosu; 0°C-160°C). (toate accesoriile prin care trece glicol sunt realizate din alama)

ALTE CARACTERISTICI:• Carcasa de izolare din EPP (dimensiuni: 90x265x565). • Set de fixare pe perete • PN 10.• Temperatura max. de functionare 120°C (scurte perioade: 160°C pentru 20 sec.).• Conexiuni externe prin compresiune si 1” tata.

DIMENSIUNI:• Racorduri: 1”• Interax: 90 mm• Latime cu izolatie: 265 mm• Inaltime cu izolatie: 565 mm


RETURN:• WILO TOP S 25/13 EM solar thermal pump• Flanged 3-way DN25 ball valve with non-return valve (the non-return valve can be bypassed easily) with a thermometer handle (thermometer with blue ring; 0°C-160°C).• 6 bar safety unit with 0-6 bar manometer - ¾” connection for expansion tank.

DELIVERY:• Flanged DN25 ball valve complete with non-return valve with a thermometer handle (thermometer with red ring; 0°C-160°C).

OTHER FEATURES:• EPP insulation box (dimensions: 90x265x565 mm).• Wall mount set.• Nominal pressure: 10 bar.• Continuous temperature: 120°C (brief period: 160°C for 20 sec.).• External connections: 22 mm compression connection and 1” male connection.

H [m]16

14

12

10

8

6

4

2

0max

inaltime de pompare

Q [m3/h]0 0,5 1 1,5 2 2,5 3 3,5 4

min


SST213

039


RETURN:• WILO TOP S 30/10 solar thermal pump.• Flanged 3-way DN32 ball valve complete with non-return valve with a thermometer handle (thermometer with blue ring; 0°C-160°C).• 8 bar safety unit with 0-10 bar manometer - ¾” connection for expansion tank.

DELIVERY:• Flanged DN32 ball valve complete with non-return valve with a thermometer handle(thermometer with red ring; 0°C-160°C).

OTHER FEATURES:• EPP insulation box (dimensions: 125x250x440 mm).• Wall mount set.• Nominal pressure: 10 bar.• Continuous temperature: 120°C (brief period: 160°C for 20 sec.).• External connections: 22 mm compression connection and 1”¼ female connection.

Descriere/DescriptionCod

Part n. Descriere/Description

SST310

Statie solara cu doua tevi si pompa Wilo Top S 30/10 8 barTwo-pipe solar station with Wilo Top S 30/10 pump, 8 bar

Grup pompare solar cu doua tevi alcatuit din:

RETUR:• Pompa termo solara WILO TOP S 30/10 premontata.• Robinet cu sfera si flanse - 3 cai DN32 cu ventil anti-retur 200 mmCA (ventilul anti-retur se poate ocoli usor) prevazut cu suport pentru termometru (termometru cu inel albastru; 0°C-160°C).• Grup de siguranta 8 bar cu manometru 0-10 bar cu racord de ¾” FM pentru vasul de expansiune.

TUR:• Robinet cu sfera si flanse DN32 cu ventil anti-retur 200 mmCA (ventilul anti-retur se poate ocoli usor) prevazut cu suport pentru termometru (termometru cu inel rosu; 0°C-160°C). (toate accesoriile prin care trece glicol sunt realizate din alama)

ALTE CARACTERISTICI:• Carcasa de izolare din EPP (dimensiuni: 125x250x400). • Set de fixare pe perete • PN 10.• Temperatura max. de functionare 120°C (scurte perioade: 160°C pentru 20 sec.).• Conexiuni externe prin compresiune si 1”¼ FM.

DIMENSIUNI:• Racorduri 1”¼• Interax: 125 mm• Latime cu izolatie: 250 mm• Inaltime cu izolatie: 440 mm

Q [m3/h]

[kW]

0.4

0.38

0.36

0.34

0.32

0.3

0.28

0.26

0.24

0.22

0.2

0.18

0.16

putere absorbita P1

0 1 2 3 4 5 6 7 8 9 10 11

max

min

H [m]11

10.5109.5

98.5

87.5

76.5

65.5

54.5

43.5

32.5

21.5

10.5

max

inaltime de pompare

2min


SST310

040

Art. SOL000

Art. SUNECO

Art. SFISOL Descriere/DescriptionCod/Part n. Descriere/Description

SFISOL

Pompa de umplere circuit solar cu injectie manuala, din alama, cu robinet sferic, pentru cresterea presiunii si umplerea cu lichid. 1⁄2“ AG, auto-etanșare cu O-ring, racord pentru teava de 15 mm. Brass solar filling pump with manual injection and ball valve for increasing the pressure and filling solar circuits.

Date tehnice/ Technical data

Debit pompa / Pump output 2 l/min.

Presiune / Pressure 4,5 bar max.


SOL000

Lichid frigorific protectiv, anticoroziv si antigel. Gata preparat pentru folosire, netoxic si biodegradabil.Protective refrigerant, anti-corrosive and antifreeze.Ready-to-use, non-toxic and biodegradable.

Date tehnice/Technical data

Componente / ComponentsPropanediol si o cantitate mare de propilen glicol cu inhibitori in solutie apoasa.Propanediol and high quantity propylene glycol with inhibitors in a water-based solution.

Culoare / Colour verde / green

Ph de la 7,5 la 9 (nediluat, la 20° C) (DIN 51369) / from 7.5 to 9 (not diluted, at 20° C) (DIN 51369)

Punctul de curgere / Pour point -34° C (DIN 51583)

Temperatura de fierbere / Boiling point aprox. / approx. +107° C (la presiune atmosferica/ at atmospheric pressure)

Temperatura continua / Max continuous temperature max. 180° C

Presiunea vaporilor / Vapour pressure aprox. / approx. 20 hPa (la/at 20° C)

Densitate / Density aprox. / approx. 1,065 g/cm3 (la/at 20° C) (DIN 51757)

Viscositate/cinematica / Viscosity/kinematic

de la 6 la 8 mm2/s (la 20° C) (DIN 51562) / from 6 to 8 mm2/s (at 20° C) (DIN 51562)

Date tehnice/Technical dataModel SUN ECOLOGY 30 SUN ECOLOGY 43Racorduri intrare/iesire / Inlet/outlet coupling inch 3/4 M – 3/4 M 3/4 M – 3/4 M

Debit / Flow rate l/min 23 32

Capacitate / Capacity lt 30 43

Presiune max / Max pressure bar 5 7

Inaltimea de aspirare max / Max suction height m 3 7

Tensiunea de alimentare / Net voltage V 230 mono 230 mono

Nivel de zgomot / Noise level db(A) < 80 < 80

accesorii pentru instalatiiaccessories for plants

Unitate de umplere pentru spalarea si umplerea sistemelor solare cu solutii cu glicol. Cadru rezistent cu roti independente pentru manevrare usoara si rezervor cu buson mare. Robinet de aspiratie direct dintr-un rezevor fara a necesita transferul in rezervorul unitatii. Unele versiuni sunt prevazute cu filtru de particule. Pompa electrica de umplere este prevazuta cu rotor cu palete ce asigura o eficienta ridicata, realizata din materiale rezistente la glicol.

Filling unit designed to wash and fill solar systems with glycol solutions. Heavy-duty trolley with independent wheels for improved handling of the machine and tank with large filling cap. Valve to suck the liquid directly from a tank with no need to transfer it into the tank. Some versions are fitted with a filter to stop any particles. The electric filling pump features a multi-blade rotor ensuring high efficiency, made of glycol-resistant materials.

041

Art. SAC020

Art. SA0025

Art. SA0040

Art. SSTOAS

Art. A00018

Art. A00024

Art. A00035

Art. A00050

Art. A00080

Descriere si modele disponibile/Description and available modelsCod/Part n. Descriere/Description

SAC020 Aerisitor permanent de alama pentru instalatii solare DN20.Permanent brass desaerator for DN22 solar systems.

SA0025 Aerisitor permanent de alama pentru instalatii solare DN25.Permanent brass desaerator for DN25 solar systems.

SA0040 Aerisitor permanent de alama pentru instalatii solare DN40.Permanent brass desaerator for DN40 solar systems.

Descriere si modele disponibile/ Description and available modelsCod/Part n. Descriere/Description Capacitate/Capacity

A00018Vas de expansiune cu membrana pentru instalatii solare, din otel emailat la cald, culoare alb RAL 9010.

Steel stove-enamelled expansion tank for solar systems - colour white RAL 9010.

18 lt

A00024 24 lt

A00035 35 lt

A00050 50 lt

A00080 80 lt

Date tehnice/Technical dataSAC020 SA0025 SA0040

Materiale / Material otel inox/stainless steel alama/brass

Temperatura max. de functionare / Max temperature de la -30°C la +200°C from -30°C to 200°C 180°C

Presiune max. de functionare / Max working pressure 10 bar 10 bar

Racord / Fitting 2 x 3/4“ FF DN20 2 x 1” IG, 1 x ½” FE

Date tehnice/Techical DataA00018 A00024 A00035 A00050 A00080

Capacitate / Capacity 18 lt 24 lt 35 lt 50 lt 80 lt

Presiune initiala / Initial pressure 3 bar

Presiune maxima de lucru / Max working pressure

10 bar

Racord / Fitting 1 x 1” AG

Set de racorduri pentru vas de expansiune art. A00018, A00024, A00035 complet cu cuplaj rapid de alama pentru schimbarea vasului cu instalatia sub presiune.

INCLUS IN SET:

• element de fixare pe perete de otel galvanizat

• racord flexibil din otel inox cu 2 x ¾” IG pentru racordarea directa a vasului de expansiune cu grupul de pompare

• suruburi, ancore, reductii de alama de la 1” IG la ¾” AG.

Set of fittings for expansion tank art. A00018, A00024, A00035, complete with brass quick-fit coupling for changing tank with plant under pressure.

INCLUDED IN SET:

• galvanized steel wall mount

• stainless steel f exible pipe with 2 x ¾” IG end fittings for direct connection of expansion tank to pump

• screws, anchors, brass reductions from 1” IG to ¾” AG.

042

Descriere si modele disponibile/Description and models availableCod/Part

n. Descriere/Description

VA2020 Ventil cu 2 cai actionat electric DN20, normal inchis in absenta curentului.DN20 2-way motor-driven valve, normally closed unless excited.



Descriere si modele disponibile/Description and models availableCod / Part n. Descriere/Description

V13120 Ventil cu 3 cai actionat electric DN20/DN20 3-way motor-driven valve





Descriere si modele disponibile/Description and models availableCod/ Part n. Descriere/Description

VR0645 Actuator electric seria 645 pentru robinet cu 3 cai 220 V, control in doua puncte. Electric actuator for valve series 645 220 V three-way, two points control.

Art. VA2020

Art. VA2032

Art. VA2025

Ventil cu 2 cai Pornit/Oprit actionat electric, cu carcasa de alama rosie, componente interne de alama si otel. Reglaj cu dispozitiv electro-termic (comanda manuala de urgenta) cu timp de reglare de aprox 3 min.

ON/OFF motor-driven 2-way valve with red brass casing, internal parts made of brass and steel.Adjusted by electro-thermal device (manual emergency command) with an adjustment time of approximately 3 min.

Ventil cu 3 cai Pornit/Oprit actionat electric, cu carcasa de alama rosie, componente interne de alama si otel, o intrare - doua iesiri. Reglaj cu dispozitiv electro-termic (comanda manuala de urgenta). Ventilele sunt completate cu racorduri filetate de alama.

ON/OFF motor-driven 3-way valve with red brass casing, internal parts made of brass and steel, one inlet - two outlets. Adjusted by electro-thermal device (manual emergency command). The valves come complete with threaded brass fittings.

Date tehnice/Technical DataVA2020 VA2025 VA2032

Presiune max. de functionare / Max working pressure 10 bar

Temperatura max. de functionare / Max working temperature 120°C, pentru perioade scurte pana la 140°C120°C, up to 140°C for short periods

Motor 230 V - 2,5 watt

Racorduri / Fittings 1 x ¾” IG1 x ¾” FE

1 x 1” FI1 x ¾” FE

1 x 1¼“ FI 1 x 1¼“ FE

Date tehnice/Technical DataV13120 V13125 V13132 V13140 V13150

Presiune max. de functionare Max working pressure

10 bar

Temperatura max. de functionare Max working temperature

120°C, pentru scurte perioade pana la 140°C 120°C, up to 140°C for short periods

Motor 230 V - 2,5 watt

Racorduri / Fittings 3 x ¾” FE 3 x 1 FE 3 x 1¼“ FE 3 x 11/2“ FE 3 x 2“ FE

accesorii pentru instalatiiaccessories for plants

Art. VR0645

Art. V13120

Art. V13132

Art. V13150

Art. V13125

Art. V13140

043

Date tehnice/Technical dataPresiune max. de functionare / Max working pressure 10 bar

Temperatura max. de functionare / Max working temperature 100°C

Conexiuni/ Fittings 3 x 1“ FE

Conexiuni set racorduri / Connection set fittings 3 x ¾" FE


TVB522 Robinet de amestec termostatic 35-60°C-1” / Thermostatic mixer tap for domestic water + fitting DN20-1”.

TVB572 Robinet de amestec termostatic 35-60°C-1” 1/4 / Thermostatic mixer tap for domestic water + fitting DN20-1” 1/4 ”.

Descriere si modele disponibile/Description and models availableCod/Part n. Descriere/Description

SCAL03 Robinet de compensare cu debitmetru ¾” Indicator de debit 3÷10 / Balancing valve with flow meter ¾ “indicator range 3 to 10

SCAL07 Robinet de compensare cu debitmetru ¾” Indicator de debit 7÷28 / Balancing valve with flow meter ¾ “indicator range 7 to 28

SCAL10 Robinet de compensare cu debitmetru 1” Indicator de debit 10÷40 / Balancing valve with flow meter 1 “indicator range 10 to 40

Descriere si modele disponibile/Description and models availableCod/Part n. Descriere/Description

FLEX01 Racord flexibil din otel inox ¾“ pentru conectare instalatie solara / Flexible stainless steel 3/4” pipe for solar plant connection

FLEX02 Racord flexibil din otel inox 1“ pentru conectare instalatie solara / Flexible stainless steel 1” pipe for solar plant connection

Art. SCAL03

Art. SCAL10

Art. SCAL07

Art. FLEX01

Art. FLEX02

Art. TVB572

Art. TVB522Robinet de amestec rezistent la temperatura cu carcasa de alama rosie pentru integrarea in conducta de apa calda, complet cu set de racorduri. Reglaj independent si limitare a temperaturii apei fara alimentare suplimentara, reglare continua intre 30 si 70°C.

Single burn-proof mixer tap with red brass casing for integration in hot water piping complete with set of fittings.Independent adjustment and water temperature limiting without additional delivery, continuous adjustment between 30 and 70°C.

Robinet de compensare cu debitmetru pentru sisteme solare. Citire directa a debitului. Corpul robinetului si debitmetrului din alama. Cromat. Robinet cu sfera pentru reglarea debitului. debitmetru cu scala gradata si indicator cu deplasare magnetica. Cu izolare.Pmax de functionare: 10 bar. domeniu de temperatura: -30÷130°C

Balancing valve with flow meter for solar systems. Direct reading of flow rate. Brass valve and flowmeter. Chrome. Ball valve for flow rate. Flowmeter with indicator scale flow magnetic movement. With insulation. Working pressure: 10 bar. Temperature range: -30 to

044

Modele disponibile/Available ModelsCod/Part n. Descriere/Description

REGFKP Sonda PT1000 Ø 6 mm (sonda colector) / PT1000 Ø 6 mm probe (collector probe)

REGFRP Sonda PT1000 Ø 6 mm (sonda rezervor apa) / PT1000 Ø 6 mm probe (water storage probe)

Sonda pentru temperatura PT1000 Ø 6 mm, cu tub din silicon 1.5 m, domeniu de temperatura de la -50 la +180°C.

accesorii pentru controlere solareaccessories for solar regulators

Art. REGFKPsonda colectorcollector probe


REGCON Condensator - 2,5 uF 470VAC

Art. REGCON

Unitate electronica de control pentru amestecul ACM, ideala pentru instalatiile de apa calda ce necesita o functie de protectie la temperatura ridicata (ardere) in prezenta altor dispozitive de reglare a temperaturii la bateriile de apa. Consta in:* Actuator electronic 220V* Controler integrat cu display LCD* 1 sonda cu cablu L= 1,5m* temperatura ACM setabila de la 5 - 95°* Posibilitate de activare prin semnal extern a unei temperaturi secundare pentru functia antilegionella.Unitatea se va combina cu un robinet cu 3 cai din seria V131xx.

Electronic control unit for mixing DHW, ideal for domestic hot water systems requiring a burn safe function in the presence of other temperature control devices for faucets. Consists of:* Electronic Actuator 220V* LCD graphic display regulator* 1 probe with cable L = 1.5 m* DHW temperature can be set from 5 - 95 °* Possibility of activation by an external signal of the second temperature for legionella function.


CRA111 Unitate electronica de control pentru amestec ACM 3/4” – 2“Electronic control unit for mixing DHW 3/4” – 2”

Art. CRA111

Art. REGFRPsonda rezervor apawater storage probe

Mufa de racord sonda - colector cu diode de siguranta la supratensiune, pentru neutralizarea tensiunilor induse de furtuni. Adecvata pentru montaj exterior (IP 65).Probe - collector connection socket with protective overvoltage diodes, to neutralize voltages induced by nearby storms. Suitable for outdoor installation (IP 65).


REGSP1 cutie de racord cu diode si protectie la supratensiune / Junction box with overvoltage protection diodes

Art. REGSP1

045

Modele disponibile/Available ModelsCod/Part n. Diametru/Diameter Lungime/Length

MTH030 Ø 6,3 mm 30 mm

MTH045 Ø 6,5 mm 45 mm

MTH060 Ø 6,5 mm 60 mm

Teaca din alama nichelata cu capac filetat pentru suport sondaNickel-coated brass sheath with threaded probe holder cap.

Functii/Functions

Display LCD grafic si indicator de control luminos bicolor / Graphic LCD and two-colour control luminous indicator

Comenzi / Commands prin intermediul a trei taste pe fata carcasei / with three pressure keys on front

Intrari / Inputs 2 sonde de temperatura Pt 1000 / 2 x PT 1000 temperature probes

Interfata / Interface VBus

WMZ este un calorimetru universal proiectat pentru a fi folosit in sistemele solare si de incalzire. Este prevazut cu display grafic pentru afisarea temperaturii pe tur si retur, cantitatea de caldura, debitul si randamentul instalatiei cat si sondele defecte (valorile de bilant raman memorate si in caz de intrerupere alimentare electrica). Adecvat pentru sisteme solare cu apa si glicol, poate fi adaptat dupa nevoi (apa, propilen glicol, etilen glicol, Tyfocor® LS).The WMZ is a universal calorimeter designed for solar and heating systems.It has a graphic display showing the delivery and return temperature, the quantity of heat, the flow and yield of the plant a well as any faulty probes (the balance values are saved also in a blackout). Suitable for solar systems with water and glycol solutions, it can be adjusted as needed (water, propylene glycol, ethylene glycol, Tyfocor® LS).


WMZ112 Unitate calorimetrica cu debitmetru inclus VFS 1-12 / Heat counter module with VFS 1-12 volumetric meter




Art. REGWMZ

Art. MTH030

Art. MTH060

Art. MTH045

046

Instalatie ceruta/System required Costuri sistem considerate/System costs considered

ACM (Apa Calda Menajera)/DHW (Domestic Hot Water) Buget/Budget €

Incalzire ambientala/Ambient heating

Incalzire Piscina/Swimming pool heating

Cerinta apa calda/Hot water requirements Profil de consum/recirculareConsumption/recirculation profile

N° persoane/N. of people Cerere de varfPeak demand h

AC per persoanaHot Water per person

RecirculareRecirculation da/yes nu/no

Perioada din anPeriod of the year

Durata de functionareDuration of use

h/zi (h/day)

Racord masina de spalat vase Dishwasher connection required

Lungime totala a instalatieiTotal length of piping m

Racord masina de spalat haine Washing machine connection required

alti consumatori AC/ziother HW/day consumption

L/zi (L/day)

Cerinte incalzire ambientala/Ambient heating requirements

Suprafata totalaGross ambient surface area m2 Consum energetic specific

Specific energy consumptionKWh/mq*a

Temperatura cerutaTemperature requirements °C

Temp. min. externaMin. outdoor temp. °C

Temp. de pornire incalzireHeating start-up temp.

°C externoutdoor temp

Tipul de incalzire (radiatoare, panouri rad.)Type of heating (radiators,rad. panels)

Perioada din anPeriod of the year

Cerinte incalzire Piscina/Swimming Pool Heating Requirements

Lungime/Length m Piscina acoperita/Covered pool

Latime/Width m Piscina descoperita/ Open swimming pool

Adancime medieAverage depth m cu acoperire/ with covering

Sistem de incalzire/Heating system Amplasare sistem termo solar/Solar thermal plant position

Lemn/Wood KW Subsol/Cellar

Diesel/Diesel KW Apartament/Flat

Gaz/Gas KW Mansarda/Ceiling

Pompa de caldura/ Heat pump KW

Suprafata centrala termicaHeating plant surface area m2

Energie electrica/ Electrical energy KW Inaltime/Height m

Adresa/Address

Client/Customer Tip locuinta (monofamiliara/condominiu/etc.)User (detached house/block of flats/etc.)

Nume/Name Nume/Name

Adresa/Address Adresa/Address

Cod postal/Oras Postcode/Town

Cod postal/Oras Postcode/Town

Telefon/Telephone Telefon/Telephone

Fax Fax

Chestionar de date pentru sisteme termo solareData collection form for solar thermal systems

047

Montarea panourilor solare/Solar panel assembly

Integrate in acoperis/Integrated in roofLatime utila acoperisUseful roof width m

Pe acoperis/On roofInaltime utila acoperisUseful roof height m

Fatada (optionale)/Façade (optional)Inaltimea sistemuluiSystem height m

Pe cadru/On frameUmbrireShading da/yes nu/no

Altele/Other

Necesita macaraCrane required da/yes nu/no

Orientarea acoperisului/Orientation of roof Tevi instalatie solara (lungime simpla)/Solar piping (simple length)

OrientareOrientation Exterior/Outdoor m

Interior/Indoor m

InclinareInclination

Calitatea apei/Water quality Intensitatea vantului/Wind strength

moale/soft calma/calm

medie/average usoara/light breeze

dura/hard medie/moderate breeze

foarte dura/very hard puternica/strong breeze

Acoperire pentru/Coverage per requirement of : Note/Remarks

Apa caldaHot water %

Incalzire ambient./ Ambient heating

%

Cheltuieli anuale curente pentru incalzire/Current annual heating costs

Costuri pentru ACM/DHW costs Euro

Costuri pentru incalzire ambient./Heating costs Euro

Costuri totale/Total cost Euro

Cost per unitate/Cost per unit Euro

Confirmare date/Confirm data

Confirmati ca datele introduse sunt corecte/ Confirm the data you entered is correct

Data si semnatura aplicantului/Date and signature of applicant

Declaratie de consimtamant in concordanta cu art. 11-20-22 din legea N.675/1996Declaration of consent in accordance with Articles 11-20-22 of Act N.675/1996În ceea ce privește informațiile furnizate, în conformitate cu articolul 10 din Legea 675/1996, vom da acordul deplin pentru prelucrarea datelor cu caracter personal de către această societate pentru a stabili relații contractuale / comerciale sau pentru performanțele acesteia. În orice caz, vom cere ca această prelucrare sa se limiteze la executarea obligațiilor care decurg din relațiile contractuale /comerciale stabilite, prin urmare, de autorizare a companiei, în conformitate cu articolul 20 alin 1, lit. A din Legea 675/1996, și prin derogare ipotezei de diseminare libera avute în vedere de către aceeași lege, comunicarea și difuzarea tuturor datelor de mai sus la companii, organisme sau consorții care oferă companiei dvs. servicii de prelucrare a datelor și alte activități asociate, de asemenea, acordul pentru comunicarea datelor declarate la firmele asociate înregistrate oficial in statele membre ale CE sau din afara acestora.In relation to the information supplied, in accordance with Article 10 of Act 675/1996, we give full consent for the processing of our personal data by this Company to establish contractual/commercial relations or for the performance of the same. In any case we request that this processing is limited to the execution of the obligations deriving from established contractual/commercial relations, therefore authorizing the Company in accordance with article 20 paragraph 1, let. A of Act 675/1996, and notwithstanding the hypothesis of free dissemination envisaged by the same Act, the communication and diffusion of all the above data to companies, bodies or consortiums providing your Company with data processing services and other associated activities, also consenting to the communication of said data to associated companies with registered offices in EC member states or outside the same.

Data si semnatura aplicantului/Date and signature of applicant

Fiorini Industries S.r.l.

Via Copernico, 81/85

47122 - Forlì - ITALY

Tel. +39 0543 723197 - Fax +39 0543 720413

[email protected] - www.fiorinigroup.it

Distribuitor: AB Tehnic Profesional S.R.L.Str. Alunisului 164, sector 4, BucurestiTel: 021.332.08.48email: [email protected]

Date post:	15-Sep-2019
Category:	Documents
Upload:	others
View:	9 times
Download:	0 times

Termo solar - abtehnic.ro · MONTAJ/ASSEMBLY Tipuri de montaj si materiale / Assembly and materials...

Documents