Terms & conditions · No change in price will be made in case of Pak rupees depreciation against...

VOCATIONAL TRAINING INSTITUTE, KAMOKE Government of the Punjab

Old Boys High School # 2, G.T. Road Kamoke. 055-6816252, Web: www.pvtc.gop.pk

TENDER DOCUMENTS

Supply of Lab Material Consumable

Industrial Electrician Estimated Cost: 87,000/-

Welder/Fabricator’ Estimated cost: 174,000/-

Dress Making’ Estimated Cost: 53,500/-

Beautician Trade’ Estimated Cost: 37,000/-

Computer and Motorcycle Mechanic Estimated

Cost:103,000 /-

Technical Bid

Price Rs. 300/-

http://www.pvtc.gop.pk/



TERMS & CONDITIONS 1. General:

1.1 Any offer not received as per terms & conditions of the tender enquiry is liable to be

ignored and also no offer shall be considered if:

received without earnest money

it is received after the time and date fixed for its receipt

not signed & stamped by authorized person on each page of tender documents

the offer is ambiguous

the offer is received by fax or e-mail

the offer is from a black listed firm

offer received with shorter validity than required

the offer is for store not conforming to specifications indicated in the tender

enquiry.

offered rate is received other than original tender documents

any conditional offer

1.2 Offered rates (in Pak Rupees) will remain valid for a period of 90 days after bid

opening. No change in price will be made in case of Pak rupees depreciation against

US$ or any other currency.

1.3 The cover envelop should indicate particulars of tender, and date of opening. Envelop

must be properly sealed.

1.4 The Purchaser (Vocational Training Institutes Kamoke) reserves the right to issue order

in full / partial quantity.

1.5 The earnest money / security shall be forfeited if:

a. The acceptance of purchase order is not received within ten days of issuance of

order

b. The offer is withdrawn, amended or revised.

c. If equipment not supplied

1.6 The bidder should indicate their National Income Tax No. / Sales Tax No. and circle of

Income Tax Department.

1.7 The bidder shall enclose catalogues, leaflets etc. in respect of store offered by them.

1.8 The contractor will be responsible for the free replacement of supply if the same is

found to be substandard and or at variance with the specifications given in the supply

order within one week at site. supply offered of specifications superior to the one

specified in the tender enquiry may be accepted subject to approval of President

DBOM.

1.9 Supply should be brand new and in original manufacturers packing.

1.10 Offered rates will be on basis of free delivery to VTI Kamoke include all taxes.

1.11 Quantity of any item can be increased or decreased by the purchaser.

1.2 1.12 Whole or part of tender can be cancelled by the President DBOM with or without

assigning any reason.

1.13 Purchase order will be issued by VTI Kamoke.

2. Delivery Period:

Delivery period is seven days from the date of issuance of purchase order.

_____________________

Signature & Stamp of bidder




3. Extension of Delivery period:

In special circumstances, request for extension of delivery period may be considered by

approving authority on the written request of the firm before the target date of supply.

4. Cancellation / Penalty of Delay:

4.1 If the acceptance of the order(s) issued during the validity period of the tender is not

acceptable by the bidder, the earnest money will be forfeited and the stores can be

purchased at his risk and cost.

4.2 In case the offer is withdrawn, amended or revised during the validity period of the

tender, the earnest money shall be forfeited.

4.3 In case bidder fails to execute the contract / order(s) in accordance with the terms &

conditions laid down in the contract, the bank guarantee will be encashed and the supply

will be purchased at his risk and cost.

4.4 In case of late delivery deduction will be made upto 3% per week of the contract amount

or condition 4.3 narrated above will be implemented as per competent authority decision.

5. Payment to the Contractors:

5.1 Payment will be made through crossed cheque to the supplier against invoice after 100%

completion of delivery, commissioning & satisfactory performance against the purchase

order from Vocational Training Institute Kamoke within 30 days after issuance of

satisfactory report by the VTI.

5.2 Payment against partial supply will not be made.

6. Bid Money:

Bid money Rs.2610/- of Industrial Electrician, Rs.5220/- of Welder/Fabricator, Rs.1605/- of

Dress Making, Rs.1110/- of Beautician Rs.3090/- of Computer & Motorcycle Mechanic (@

3% of the estimated price of tender) will have to be deposited along with tender. It should be

in the form of Pay Order / Demand Draft in favor of Vocational Training Institute Kamoke,

Bid money of successful bidder shall be refunded on successful completion of supply and

provision of bank guarantee the performance bond from schedule whereas bid money of

unsuccessful bidders will be refunded on the approval of tender by Competent Authority.

7. Delivery / Inspection of store

The Equipment will be inspected by the concerned VTI through an authorized committee and

will reject the supply, if not found according to the given specification/quality.

8. Deduction of Taxes:

Any taxes (if applicable) will be deducted while making payment as per Government

instructions/ notifications.

9. Payment of sales & other taxes, duties, levies:

Purchase shall be made from the firms registered with income and sales tax, sales and other

such taxes, import duty, surcharge and other will be liability of the supplier.

10. Termination of Contract:

President VTI Kamoke may terminate contract for convenience assigning reasons to the

contractor in writing with compensation of items delivered to the purchaser if applicable.

a) Other items as per specification.

11. Dispute Resolution:

In case of any dispute before or after the execution of contract, matter will be resolved as per

PPRA Rules 2014’ Clause 67 & 68. The dispute arising after the contract shall be resolved in

the following manner/mechanics.

11.1 The arbitrator will be President VTI Kamoke.

11.2 The contractor shall provide his grievances in writing within 10 days after the dispute.

11.3 The arbitrator shall decide the matter after hearing both parties within 15 days after

receiving the written complaints from the contractors.

11.4 The decision of the arbitrator shall be final and binding for both the parties.

___________________





12. Information about the firm:

The firms shall supply information along with tender otherwise bid will be rejected:

a) Copy of NTN, GST certificate

b) Affidavit for non-default/black listed.

c) Bid Money

d) Company profile.

13. Bid / Tender opening procedure

a. the bid shall comprise on single packet containing two envelopes. Each envelope shall

contain separately the financial proposal and the technical proposal;

b. The envelopes shall be marked as “FINANCIAL PROPOSAL” and “TECHNICAL

PROPOSAL” in bold and legible letters

c. Initially, only the envelope marked “TECHNICAL PROPOSAL” shall be opened

d. the technical proposal shall be evaluated in a manner prescribed in advance as mentioned

in the tender documents, with reference to the total price and any proposal may be

rejected which does not conform to the specified requirements.

e. during the evaluation no amendments in the proposal shall be permitted;

f. the proposals of bid shall be opened publicly at a time, date and venue announced

(Principal office, G. T. Road Kamoke) and communicated to the bidders in advance.

14. Warranty

The warranty (material and labor) shall be provided by the firm for six months from the date

of satisfactory report by this Institute.

15. Performance Bond

Six months performance bond (material and labor) in the shape of schedule bank guarantee to

the satisfaction of VTI Kamoke equivalent to 3% of the total purchase order amount will have

to be furnished at the time of delivery of Lab Material Consumable. Guarantee will be

returned after successful completion of the warranty period.

16. Date of Submission / opening:

Receipt of tenders : December 24, 2019 till 10:00 AM

Opening of tenders : December 24, 2019 till 10:30 AM in Principal office,

G. T. Road Kamoke

___________________





Particulars of the Firm:

Name of Firm: __________________________

Address: ________

__________________________________________________

Phone: Cell: ____________________________

Contact Person/Desig: ____________________________________________

E-mail:___________________________ Fax:_________________________

NTN: _______________________________________________________

GST No.________________________________________________________ ___

_______________________





Technical Bid

Detail of Consumable Material

Sr. # Description Type Quantity Specification

Industrial Electrician

1 Cable 3 /.029", Single core, 99 %

copper, Pak popular or equivalent coil 5

2 Cable 7 /.029",Single core, 99 %


3 Cable 1/.044", Single core, 99 %


4 Cable 23/.0076" Flexible Two Core coil 1

5 Cable 40/.076" Flexible Two Core coil 1

6

Switch Single Way, Bakelite Resin,

250V/15A, Piano Type, Imran & Co or equivalent

Dozen 10

7 Switch Two Way, Bakelite Resin , 250V/15A, Piano Type, Imran & Co or

equivalent

Dozen 6

8 Bulb Holder, Bakelite Resin, 250V/15A , Piano Type, Imran & Co or equivalent

Dozen 6

9 Bulb Holder, Wall Adjustable, B22, Bakelite Resin, 250V/15A, Imran & Co or equivalent

Dozen 6

10 Socket two Pin, Bakelite Resin, 250V/15A, Piano Type, Imran & Co or equivalent

Dozen 10

11 Insolation Tape Osaka or equivalent No 60

12 PVC Duct Plain, 3/4", Fony Dult or

equivalent Length 12

13 Self Screw Different Size, (1/2", 3/4", 1"/ 1.5"/ 2"/ 2.5"/ 3" equal quantity)

Dozen 63

14 Steel Nail Different Size( 1"/1.5" /2"2.5)

Dozen 48

15 Blub 100 Watt, Kiran or equivalent No 24


17 Two Pin Shoe,250V/20 AMP Bakelite Resin, Sharjha or equivalent

Dozen 4




18 Three Pin Shoe, 250V/25 AMP Bakelite Resin, Sharjha or equivalent

No 12

19 Energy Sever 42 Watt Philips No. 24


21 Fan Dimmer No 6

22 Light Plug No 6

23 PVC Pipe 3/ 4" (10' length) No 12

24 PVC Elbow 3/ 4" No 24

25 PVC Band 3/ 4 " No 24

26 Pipe Saddle 3/ 4" Packet 2

27 PVC Junction bux 3/4'' (12 No. Packet) No 24

28 Fuse Piano type No 24

29 Main Switch 30 A No 12

30 Nutt Bolt 1'''*3/4" or 1 1/2'''*1"or 1 1/2'''*1 1/2" 2'''*1"or 2'''*1 or1/2"or 2'''*2"

Box 6

31 Electric Bell AC 220V No 6

32 Breaker Strip (3', 1- length) Length 1

Welder/Fabricator

33 Welding Electrode MT-48 2.5mmxx300mm Kg 60

34 Grinding Disk 7'' Rite No 18

35 Cutting Disk 4'' Rite No 12

36 Steel Meter Tape 6 meter No 12


38 Tangston Electrode Starex 2.5mm No 20

39 Filling of Argon Gas Cylinder 2000 Pond Pressure Cylinder 2

40 Filling of CO2 Gas Cylinder 2000 Pond Pressre Cylinder 2

41 Argon Welding Gloves Leather Paris 30

42 Welding Holder 500 Amp China No 3

43 Welding Helmet No 10

44 Welding Hemet White glass No 30

45 Welding Screen No 10




46 Welding Screen White glass No 30

47 Welding Helmet Catcher with bolt

Taiwan No 10

48 Filling of LPG Gas cylinder kg 48

49 Filling of Oxygen Gas Cylinder Cylinder 4

50 Bras Wire Local kg 2

51 MS Filler Wire Local kg 3

52 Feed Wire Unit 0.9mm/1mm Golden Bridge 15kg No 2

53 Iron Angel 1''x1''' kg 20

54 Iron Pipe clump 1/2'' best Local kg 24

55 Insulation Tape Osaka Dozen 1

56 CO2 Torch Nozzle 1.2mm No 2

57 CO2 Torch Nozzle Cup No 2

58 Iron Patti 1''x1''' kg 15

59 Iron Saria round 2.5''' kg 10

60 Iron Saria Chorus 2mm kg 10

61 Paint different (Quart dibbi) No 5

62 Steel Wire Brush Wood Handle No 5

63 Hand Share Katira Middle Size No 2

64 Iron Chador Jest (22g) kg 10

65 Tong (16'') No 3

66 Rawal Bolt 2 1/2''' Dozen 2

67 Welding cable copper 6mm Meter 10

68 Safety Apron (Jean) for welding No 2

69 Cutting Desk 14'' No 25

70 Gas Welding Torch No 2

71 Gas Cutting Torch No 1

72 LPG Sylinder Gas No 1

73 Iron Job Plate 12''x12'' No 15




74 Plas Rivet pin Iron Box 1

75 Color Gun Gun No 1

76 Amri Paper 0,1,2,3 No 40

77 Welding Thumble 6'' No 6

78 Argon Back cup Long/small No 6

79 Colt Cup / Gas Laser No 4

80 Ceramic Cup 07 number No 10

81 Grinder Button 7'' Taiwan No 2

Dress Making

82 Pin Cushions with steel body piece 5

83 Scissors Large 10'' Iron fine quality for

cloth cutting No 16

84 Wood Frame for Embroidery piece 36

85 Common Pins Dibbi 10

86 Marking chalk No 100

87 Pearl Pin (patta with 24 quantity) ptay 24

88 UHU small No 20

89 Shital Lace 1'' width different color/design Guz 200

90 Cloth Piping (Different Colour) Patay 10

91 Chickan Lace 1'' width (diferent Colour ) Guz 30

92 Collar 2 piece (15 No.) Madni/Falkan No 24

93 Elastic Rol 1.5'' width (20 guz) No 4

94 Stitch Opner steel No

25

95 Hand Needles (patta 10 needles) Patay

18

96 Machine Needles (10 pieces patta) 18 No. Rocket Patay

150

97 Thread Reals (Falcon) No 800

98 Small Zip No 50

99 Iron Hooks Small No 100




100 Computerized Machine Needles 16 No.

Rocket (10 pieces patta) Patay 3

101 Imported overlock thread 1.5 kg roll Roll 4

102 overlock needles orange DC 16 No.

korea (10 pieces patta) Patay 2

103 Joki Needles DB 16 No. Orange korea

(10 pieces patta) Patay 2

104 Small Scissors 6'' fine quality for cloth

cutting No 50

105 White Chart No 30

106 Brown Papers Sheet 200

Beautician

107 Amonia 20 ml Bottle 6

108 Hydrogen 20 ml Bottle 6

109 Base Derma x (Ivory Color) Christine

or equivalent No 6

110 Eye Brow Pencil, Black/Brown Miss rose No 12

111 Compact Powder parlar pack christine

or equivalent (Ivory Color) No 4

112 Hair Mask 500 ml keune or equivalent No 2

113 Blush on Kit (christine) No 3

114 Hair Mousse 1000 ml NOVA Bottle 2

115 Tooth Comb for Back Combing No 10

116 Surf Excel Kg 2

117 Donel Bunch Joora No 6

118 Hair Color Keune No. (8.3) Tube 2

119 Hair Capsol Keune No 12

120 Mehndi Cone No 30

121 Nail Polish Medora No 12

122 Paint Stick christine (F-1) No 3

123 Paint Stick christine (W-2) No 3

124 Hair Protine Spray Keune Bottle 2

125 Serum (Keune) No 4




126 Volume (40) Keune 1000ml Bottle 1

127 White Pencil Eyebrow Christine No 1

Computer & Motorcycle Mechanic

128 HP Optical Mouse No 30

129 HP Keyboard No 20

130 D-Link Wireless DIR-825 AC 1200 Dual

Brand Gigabit Router No 1

131 RAM 2 GB DDR3 No 5

132 RAM 4 GB DDR4 2400UDIMM No

133 USB Kingston 4 GB No 4

134 USB DVD Drive Samsung No 1

135 Blank DVD No 15

136 USB Wireless Card No 5

137 Air Filter CD 70 (Honda70)

No. 4

138 Air Filter CG 125 (Honda 125)

No. 2

139 Break Shoo CD 70

No. 2

140 Drive chain kit CD 70 local

No. 1

141 Drive chain kit 125 (CK)

No. 1

142 Tyre Tube 317 F/R No (Service)

No. 2

143 Tyre Tube 2.50.18F/R No (Service)

No. 2

144 Tubes 317 NoR (Service)

No. 2

145 Tubes 2.50.18F (Service)

No. 2

146 Handle Cup (Crown Lifon)

No. 6

147 Different Net Bolts (Local)

No. 100

148 Battery (AGS) 12V

No. 3

149 Gan Kit Complete 70, 125, (Crown lifon)

No. 2

150 Gan Kit Complete 70 (Crown lifon)

No. 2




151 Gan Kit Complete YAMAHA (Crown lifon)

No. 2

152 Half Gan Kit CD 70 (Crown lifon)

No. 2

153 Cotton Waste cloth KG

20

154 H/L Bulb CD 70 (Crown lifon)

No. 6

155 B/L Bulb motorcycle CD 70

No. 6

156 Spark Plug CD 70 (NGK)

No. 2

157 Spark Plug Yamaha (NGK)

No. 2

158 Spark Plug 125 (NGK)

No. 2

159 Insulation Tape (Osaka)

No. 6

160 Silicon

KG 1

161 Grease

packet 12

162 Amery Paper 0 No/1 No.

No. 12

163 Clutch warm LNKI CD 70

No. 1

164 Horn CD 70(Crown lifon)

No. 3

165 T-Handle 10,8 (G.T)

No. 6

166 Clutch Cable CD 70 (Crown lifon)

No. 2

167 Clutch Cable CG 125 (Crown lifon)

No. 2

168 Break Cable CD 70 (Crown lifon)

No. 2

169 Break Cable CG125 (Crown lifon)

No. 2

170 Back light complete 125 (Crown lifon)

No. 1

171 Filler Guage (G.T)

No. 4

172 Starting Coil CD 70 (Crown lifon)

No. 2

173 Pluser Coil CD70, 125 (Crown lifon)

No. 2

174 Ignition switch complete 3 piece CD70

(Crown lifon) No. 1

175 Footrest Local No. 1

176 Magnet puller Local No. 1




177 Adjustable Spammer 12No G.T No. 1

178 Connecting Rod (Crown lifan)

No. 1

179 Weight barring 6304 (Crown lifan)

No. 2

180 Ring Piston (Crown lifan)

No. 1

181 Wall (Crown lifan)

No. 1

182 Came shaft (Crown lifan) or equivalent

No. 1

183 Main shaft gear (Crown lifan) or equivalent

No. 1

184 main shaft barring (Crown lifan) or equivalent

No. 1

185 barring 6203 (Crown lifan) or

equivalent No.

2

186 Gear shaft (Crown lifan) or equivalent

No. 1

187 Gear Liver (Crown lifan) or equivalent

No. 1

188 Kick spinder (Crown lifan) or equivalent

No. 1

189 clutch box complete (Crown lifan) or equivalent

No. 1

190 Jean kit (Crown lifan) or equivalent

No. 1

191 Seal kit (Crown lifan) or equivalent

No. 1

192 Timing Chane 84 link (Crown lifan) or equivalent

No. 1

193 Tenshioner pump (Crown lifan) or equivalent

No. 1

194 Rocker Arm (Crown lifan) or equivalent

No. 1

195 Wall seal (Crown lifan) or equivalent

No. 1

196 Challa kit (Crown lifan) or equivalent

No. 1

197 Engine Oil (Crown lifan) or equivalent

No. 1

198 Chain cover (Crown lifan) or equivalent

No. 1

199 Grip Set Race/Clutch (Crown lifan) or equivalent

No. 1

200 Liver brake (Crown lifan) or equivalent

No. 1




201 Clutch liver (Crown lifan) or equivalent

No. 1

202 seat cover (Crown lifan) or equivalent

No. 1

203 Indicator CD70 (Crown lifan) or

equivalent No.

4

204 Head Light complete (Crown lifan) or equivalent

No. 1

205 Back light (Crown lifan) or equivalent

No. 1

206 Battery 12 V Osaka or equivalent

No. 1

207 Horn (Crown lifan) or equivalent

No. 1

208 Shalk back (Crown lifan) or equivalent

No. 2

209 Air filter (Crown lifan) or equivalent

No. 1

210 Side cover (Crown lifan) or equivalent

No. 2

211 Brake show (Crown lifan) or equivalent

No. 1

212 Wiring complete (Crown lifan) or

equivalent No.

1

213 Plug (Crown lifan) or equivalent

No. 1

214 Plug adapter (Crown lifan) or equivalent

No. 1

215 Madgard front (Crown lifan) or

equivalent No.

1

216 Key switch (Crown lifan) or equivalent

No. 1




TENDER DOCUMENTS

Financial Bids




Financial Bid

Detail of Consumable Material

Sr. # Description Type Quantity Rate Total

Industrial Electrician

1 Cable 3 /.029", Single core, 99 % copper, Pak papular or equivalent

coil 5

2 Cable 7 /.029",Single core, 99 % copper, Pak papular or equivalent

coil 2

3 Cable 1/.044", Single core, 99 %

copper, Pak papular or equivalent coil 2

4 Cable 23/.0076" Flexiable Two Core coil 1

5 Cable 40/.076" Flexiable Two Core coil 1

6 Switch Single Way, Bakelite Resin, 250V/15A, Piano Type, Imran & Co or

equivalent

Dozen 10

7 Switch Two Way, Bakelite Resin , 250V/15A, Piano Type, Imran & Co or

equivalent

Dozen 6

8 Bulb Holder, Bakelite Resin, 250V/15A , Piano Type, Imran & Co or equivalent

Dozen 6

9

Bulb Holder, Wall Adjustable, B22,

Bakelite Resin, 250V/15A, Imran & Co or equivalent

Dozen 6

10

Socket two Pin, Bakelite Resin,

250V/15A, Piano Type, Imran & Co or equivalent

Dozen 10

11 Insolation Tape Osaka or equivalent No 60

12 PVC Duct Plain, 3/4", Fony Dult or equivalent

Length 12

13 Self Screw Different Size, (1/2"/3/4"/ 1"/ 1.5", 2", 2.5", 3" any from above)

Dozen 63

14 Steel Nail Different Size( 1",1.5" 2"2.5) Dozen 48



17 Two Pin Shoe,250V/20 AMP Bakelite

Resin, Sharjha or equivalent Dozen 4




18 Three Pin Shoe, 250V/25 AMP Bakelite Resin, Sharjha or equivalent

No 12



21 Fan Dimmer No 6

22 Light Plug No 6

23 PVC Pipe 3/ 4" (10' length) No 12

24 PVC Elbow 3/ 4" No 24

25 PVC Band 3/ 4 " No 24

26 Pipe Saddle 3/ 4" Packet 2

27 PVC Junction bux 3/4'' (12 No. Packet) No 24

28 Fuse Piano type No 24

29 Main Switch 30 A No 12

30 Nutt Bolt 1'''*3/4" or 1 1/2'''*1"or 1 1/2'''*1 1/2" 2'''*1"or 2'''*1 or1/2"or 2'''*2"

Box 6

31 Electric Bell AC 220V No 6

32 Breaker Strip (3', 1- length) Length 1

Welder/Fabricator

33 Welding Electrode MT-48 2.5mmxx300mm Kg 60

34 Grinding Disk 7'' Rite No 18

35 Cutting Disk 4'' Rite No 12



38 Tangston Electrode Starex 2.5mm No 20

39 Filling of Argon Gas Cylinder 2000 Pond Pressure Cylinder 2

40 Filling of CO2 Gas Cylinder 2000 Pond Pressre Cylinder 2

41 Argon Welding Gloves Leather Paris 30

42 Welding Holder 500 Amp China No 3

43 Welding Helmet No 10

44 Welding Hemet White glass No 30

45 Welding Screen No 10




46 Welding Screen White glass No 30

47 Welding Helmet Catcher with bolt

Taiwan No 10

48 Filling of LPG Gas cylinder kg 48

49 Filling of Oxygen Gas Cylinder Cylinder 4

50 Bras Wire Local kg 2

51 MS Filler Wire Local kg 3

52 Feed Wire Unit 0.9mm/1mm Golden Bridge 15kg No 2

53 Iron Angel 1''x1''' kg 20

54 Iron Pipe clump 1/2'' best Local kg 24

55 Insulation Tape Osaka Dozen 1

56 CO2 Torch Nozzle 1.2mm No 2

57 CO2 Torch Nozzle Cup No 2

58 Iron Patti 1''x1''' kg 15

59 Iron Saria round 2.5''' kg 10

60 Iron Saria Chorus 2mm kg 10

61 Paint different (Quart dibbi) No 5

62 Steel Wire Brush Wood Handle No 5

63 Hand Share Katira Middle Size No 2

64 Iron Chador Jest (22g) kg 10

65 Tong (16'') No 3

66 Rawal Bolt 2 1/2''' Dozen 2

67 Welding cable copper 6mm Meter 10

68 Safety Apron (Jean) for welding No 2

69 Cutting Desk 14'' No 25

70 Gas Welding Torch No 2

71 Gas Cutting Torch No 1

72 LPG Sylinder Gas No 1

73 Iron Job Plate 12''x12'' No 15




74 Plas Rivet pin Iron Box 1

75 Color Gun Gun No 1

76 Amri Paper 0,1,2,3 No 40

77 Welding Thumble 6'' No 6

78 Argon Back cup Long/small No 6

79 Colt Cup / Gas Laser No 4

80 Ceramic Cup 07 number No 10

81 Grinder Button 7'' Taiwan No 2

Dress Making

82 Pin Cushions with steel body piece 5

83 Scissors Large 10'' Iron fine quality for

cloth cutting No 16

84 Wood Frame for Embroidery piece 36

85 Common Pins Dibbi 10

86 Marking chalk No 100

87 Pearl Pin (patta with 24 quantity) ptay 24

88 UHU small No 20

89 Shital Lace 1'' width different color/design Guz 200

90 Cloth Piping (Different Colour) Patay 10

91 Chickan Lace 1'' width (diferent Colour ) Guz 30

92 Collar 2 piece (15 No.) Madni/Falkan No 24

93 Elastic Rol 1.5'' width (20 guz) No 4

94 Stitch Opner steel No

25

95 Hand Needles (patta 10 needles) Patay

18

96 Machine Needles (10 pieces patta) 18 No. Rocket Patay

150

97 Thread Reals (Falcon) No 800

98 Small Zip No 50

99 Iron Hooks Small No 100




100 Computerized Machine Needles 16 No.

Rocket (10 pieces patta) Patay 3

101 Imported overlock thread 1.5 kg roll Roll 4

102 overlock needles orange DC 16 No.

korea (10 pieces patta) Patay 2

103 Joki Needles DB 16 No. Orange korea

(10 pieces patta) Patay 2

104 Small Scissors 6'' fine quality for cloth

cutting No 50

105 White Chart No 30

106 Brown Papers Sheet 200

Beautician

107 Amonia 20 ml Bottle 6

108 Hydrogen 20 ml Bottle 6

109 Base Derma x (Ivory Color) Christine

or equivalent No 6

110 Eye Brow Pencil, Black/Brown Miss rose No 12

111 Compact Powder parlar pack christine

or equivalent (Ivory Color) No 4

112 Hair Mask 500 ml keune or equivalent No 2

113 Blush on Kit (christine) No 3

114 Hair Mousse 1000 ml NOVA Bottle 2

115 Tooth Comb for Back Combing No 10

116 Surf Excel Kg 2

117 Donel Bunch Joora No 6

118 Hair Color Keune No. (8.3) Tube 2

119 Hair Capsol Keune No 12

120 Mehndi Cone No 30

121 Nail Polish Medora No 12

122 Paint Stick christine (F-1) No 3

123 Paint Stick christine (W-2) No 3

124 Hair Protine Spray Keune Bottle 2

125 Serum (Keune) No 4




126 Volume (40) Keune 1000ml Bottle 1

127 White Pencil Eyebrow Christine No 1

Computer & Motorcycle Mechanic

128 HP Optical Mouse No 30

129 HP Keyboard No 20

130 D-Link Wireless DIR-825 AC 1200 Dual

Brand Gigabit Router No 1

131 RAM 2 GB DDR3 No 5

132 RAM 4 GB DDR4 2400UDIMM No

133 USB Kingston 4 GB No 4

134 USB DVD Drive Samsung No 1

135 Blank DVD No 15

136 USB Wireless Card No 5

137 Air Filter CD 70 (Honda70)

No. 4

138 Air Filter CG 125 (Honda 125)

No. 2

139 Break Shoo CD 70

No. 2

140 Drive chain kit CD 70 local

No. 1

141 Drive chain kit 125 (CK)

No. 1

142 Tyre Tube 317 F/R No (Service)

No. 2

143 Tyre Tube 2.50.18F/R No (Service)

No. 2

144 Tubes 317 NoR (Service)

No. 2

145 Tubes 2.50.18F (Service)

No. 2

146 Handle Cup (Crown Lifon)

No. 6

147 Different Net Bolts (Local)

No. 100

148 Battery (AGS) 12V

No. 3

149 Gan Kit Complete 70, 125, (Crown lifon)

No. 2

150 Gan Kit Complete 70 (Crown lifon)

No. 2




151 Gan Kit Complete YAMAHA (Crown lifon)

No. 2

152 Half Gan Kit CD 70 (Crown lifon)

No. 2

153 Cotton Waste cloth KG

20

154 H/L Bulb CD 70 (Crown lifon)

No. 6

155 B/L Bulb motorcycle CD 70

No. 6

156 Spark Plug CD 70 (NGK)

No. 2

157 Spark Plug Yamaha (NGK)

No. 2

158 Spark Plug 125 (NGK)

No. 2

159 Insulation Tape (Osaka)

No. 6

160 Silicon

KG 1

161 Grease

packet 12

162 Amery Paper 0 No/1 No.

No. 12

163 Clutch warm LNKI CD 70

No. 1

164 Horn CD 70(Crown lifon)

No. 3

165 T-Handle 10,8 (G.T)

No. 6

166 Clutch Cable CD 70 (Crown lifon)

No. 2

167 Clutch Cable CG 125 (Crown lifon)

No. 2

168 Break Cable CD 70 (Crown lifon)

No. 2

169 Break Cable CG125 (Crown lifon)

No. 2

170 Back light complete 125 (Crown lifon)

No. 1

171 Filler Guage (G.T)

No. 4

172 Starting Coil CD 70 (Crown lifon)

No. 2

173 Pluser Coil CD70, 125 (Crown lifon)

No. 2

174 Ignition switch complete 3 piece CD70

(Crown lifon) No. 1

175 Footrest Local No. 1

176 Magnet puller Local No. 1




177 Adjustable Spammer 12No G.T No. 1

178 Connecting Rod (Crown lifan)

No. 1

179 Weight barring 6304 (Crown lifan)

No. 2

180 Ring Piston (Crown lifan)

No. 1

181 Wall (Crown lifan)

No. 1

182 Came shaft (Crown lifan) or equivalent

No. 1

183 Main shaft gear (Crown lifan) or equivalent

No. 1

184 main shaft barring (Crown lifan) or equivalent

No. 1

185 barring 6203 (Crown lifan) or

equivalent No.

2

186 Gear shaft (Crown lifan) or equivalent

No. 1

187 Gear Liver (Crown lifan) or equivalent

No. 1

188 Kick spinder (Crown lifan) or equivalent

No. 1

189 clutch box complete (Crown lifan) or equivalent

No. 1

190 Jean kit (Crown lifan) or equivalent

No. 1

191 Seal kit (Crown lifan) or equivalent

No. 1

192 Timing Chane 84 link (Crown lifan) or equivalent

No. 1

193 Tenshioner pump (Crown lifan) or equivalent

No. 1

194 Rocker Arm (Crown lifan) or equivalent

No. 1

195 Wall seal (Crown lifan) or equivalent

No. 1

196 Challa kit (Crown lifan) or equivalent

No. 1

197 Engine Oil (Crown lifan) or equivalent

No. 1

198 Chain cover (Crown lifan) or equivalent

No. 1

199 Grip Set Race/Clutch (Crown lifan) or equivalent

No. 1

200 Liver brake (Crown lifan) or equivalent

No. 1




201 Clutch liver (Crown lifan) or equivalent

No. 1

202 seat cover (Crown lifan) or equivalent

No. 1

203 Indicator CD70 (Crown lifan) or

equivalent No.

4

204 Head Light complete (Crown lifan) or equivalent

No. 1

205 Back light (Crown lifan) or equivalent

No. 1

206 Battery 12 V Osaka or equivalent

No. 1

207 Horn (Crown lifan) or equivalent

No. 1

208 Shalk back (Crown lifan) or equivalent

No. 2

209 Air filter (Crown lifan) or equivalent

No. 1

210 Side cover (Crown lifan) or equivalent

No. 2

211 Brake show (Crown lifan) or equivalent

No. 1

212 Wiring complete (Crown lifan) or

equivalent No.

1

213 Plug (Crown lifan) or equivalent

No. 1

214 Plug adapter (Crown lifan) or equivalent

No. 1

215 Madgard front (Crown lifan) or

equivalent No.

1

216 Key switch (Crown lifan) or equivalent

No. 1


Date post:	06-May-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Terms & conditions · No change in price will be made in case of Pak rupees depreciation against...

Documents